Effect of boron as an antidote on dry matter intake, nutrient utilization and fluorine balance in buffalo (Bubalus bubalis) exposed to high fluoride ration

It is well known that excessive accumulation of fluorides can exert toxic effects on various tissues and organs so as to severely damage the health and production of animals. The aim of this study was to determine beneficial effect of boron on nutrient utilization in buffalo calves exposed to high fluoride (F) ration. For this purpose, we used three groups of four male Murrah buffalo calves (body weight 98-100 kg, aged 6-8 month) each. Control animal was given only basal diet and concentrate mixture. However, treatment I animals were fed basal diet, concentrate mixture, and F [as NaF, 60 ppm of dry matter (DM)]. The treatment II animals were fed basal diet, concentrate mixture, F (as NaF, 60 ppm of DM), and B (as sodium tetraborate, 140 ppm of DM). After 90 days of experimental feeding, a metabolism trial of 7 days duration was conducted to study the treatment effect on nutrient utilization of proximate nutrients, absorption, excretion, and retention of N, Ca, P, Fe, Zn, Cu, and F. Dietary F significantly (p < 0.05) depressed the dry matter intake and increased the apparent digestibility, absorption, and retention of F. However, boron supplementation significantly (p < 0.05) decreased the apparent digestibility, absorption, and retention of F and improved the dry matter intake, fecal excretion, and percent of absorbed F excreted via urine. Apparent digestibility of proximate nutrients (viz. DM, crude protein, crude fiber, ether extract, and nitrogen free extract) was unaffected on either F or F+B treatment. However, absorption and excretion of N, Ca, P, Fe, Zn, and Cu were affected significantly (p < 0.05) on F or F+B treatment. These findings suggest that fluoride-containing diet for short duration has effect on nutrient utilization, and boron at 140-ppm dose level, in general, antagonized the absorption and retention of F and also improved the feed intake in buffalo calves.

The effect of in-office in combination with intracoronal bleaching on enamel and dentin bond strength and dentin morphology

AIM

The aim of this study was to evaluate in vitro effects of the combination of in-office and intracoronal bleaching on enamel and dentin bond strength and on dentin morphology.

METHODS AND MATERIALS

Bleaching treatment was performed on 128 bovine teeth for three weeks. Intracoronal bleaching was performed in groups G1 to G3, and in the other groups a combination of in-office and intracoronal bleaching was performed. The following agents and materials were used (n=16): G1- sodium perborate and water (SP); G2- 37% carbamide peroxide (CP); G3- 35% hydrogen peroxide (HP); G4- HP + cotton pellet soaked in water (CPW); G5- HP + SP; G6- HP + CP; G7- HP + HP; and G8- CPW (control). Seven days after bleaching treatment the teeth were sectioned into two halves. One half of each tooth was ground to obtain a flat dentin surface. Dentin and enamel fragments were treated with a dentin/enamel resin adhesive. Resin composite was inserted in two increments and polymerized for 20 seconds. Following the restorative procedures, specimens were sectioned into beams with a rectangular cross-sectional area of approximately 1 mm2. Microtensile testing was performed in a universal testing machine. Bond strengths (in MPa) were calculated and the data were submitted to an analysis of variance (ANOVA) and the Tukey test (a=0.05). For the scanning electron microscopy (SEM) observation, the exposed pulp chambers (n=5) were fixed, dehydrated, dried in a Critical Point dryer, and gold-sputter coated for analysis at standardized magnifications (500X, 1000X, and 2000X).

RESULTS

None of the bleaching techniques reduced the enamel bond strength, the best results observed were with the intracoronal treatments with SP and HP. In dentin all bleaching techniques reduced the bond strength with the exception of the in-office HP application technique. The SEM results demonstrated similar dentin surfaces for the G1, G3, G6, and G7 groups with more open dentin tubules found than in the other groups.

CONCLUSION

None of the bleaching techniques tested reduced the bond strength of enamel, but they all reduced the bond strength of dentin with the exception of the group only treated with in-office bleaching using 35% HP. The worst bond strength results to dentin were observed in groups that received intracoronal bleaching with SP.

Biological and immune response of Galleria mellonella (Lepidoptera: Pyralidae) to sodium tetraborate

Inorganic insecticides are commonly used in urban pest management because of their low mammalian toxicity. We tested the effects of sodium tetraborate (ST) on life parameters of greater wax moth, Galleria mellonella (L.) (Lepidoptera: Pyralidae), to determine its sublethal toxicity on the insect. Survival, development, adult longevity, and fecundity of the wax moth were investigated by rearing larvae on artificial diets containing ST at concentrations of 0.005, 0.1, 0.2, or 0.3%. Larvae reared on medium at the highest concentration of ST (0.3%) had significantly decreased survival to the seventh instar and prolonged time required to reach the seventh instar. This concentration reduced pupa and adult yields to 12.5%, and it also prolonged development by 5 d. ST did not significantly influence adult longevity. Dietary ST led to significant decreases in fecundity and egg viability. Oviposition of survivors at the highest ST concentration (0.3%) was completely inhibited. Lysozyme content was decreased in larval hemolymph and fat body at high dietary ST concentrations. Fat body lysozyme content was significantly increased two-fold for larvae reared on diet at the lowest concentration of ST (0.005%). However, the highest concentration (0.3%) dramatically decreased fat body lysozyme content from 0.12 +/- 0.013 to 0.006 +/- 0.003 mg/ml in seventh instars. We infer that sublethal levels of dietary ST substantially influence life history parameters and immunocompetence in G. mellonella.

[Development of intracellular structural adaptive processes during use of mineral waters]

Use of drinking sulphate mineral water causes development of structural adaptive processes in Sertoli cells of testicles, which appears in hyperplasia of various ultrastructures (mitochondrions, ribosomes et al.). After use of boride mineral water the level of development of structural adaptive reactions was lower.

In vitro effects of calcium fructoborate on fMLP-stimulated human neutrophil granulocytes

Discovery of naturally occurring boron complexes with organic compounds containing hydroxyl groups, sugars, and polysaccharides, adenosine-5-phosphate, pyridoxine, riboflavin, dehydroascorbic acid, and pyridine nucleotides led to the reassessment of the biochemical role of boron. Boron's anti-inflammatory actions were claimed but not yet demonstrated. This study investigated the effects of calcium fructoborate (CF) on the human polymorphonuclear neutrophils (PMN) that play a central role in the inflammatory response. Our results demonstrated that CF exposure induced a dose-dependent decrease in cell viability. Treatment of PMN cells, for 24 h, with 22,500 microM CF led to a decrease in cell viability by 61.1%, an inhibition of respiratory burst by 92.9% in the case of fMLP-stimulated cells, a diminution of intracellular level of superoxide anion with 59.3%, and a stimulation of superoxide dismutase activity by 72% in unstimulated PMN cells. Altogether, these results suggest the antioxidant and anti-inflammatory properties of CF.

Antimicrobial properties of highly fluorinated tris(pyrazolyl)borates

Highly fluorinated tris(pyrazolyl)borates were tested for their antimicrobial activity against various bacterial species. Both the silver(I) tris(pyrazolyl)borate [HB(3,5-(CF(3))(2)Pz)(3)]Ag(THF) (THF=tetrahydrofuran) and the sodium analog [HB(3,5-(CF(3))(2)Pz)(3)]Na(THF) appeared highly effective at inhibiting the growth of two different species of Gram-positive bacteria (i.e. being 12 and 21 fold more effective, respectively, (on a molar basis, based on the minimum inhibitory concentrations) against Staphylococcus aureus than silver sulfadiazine, a currently used silver antimicrobial). This suggests that the ligand portion of these molecules is responsible for the observed high effectiveness against the Gram-positive species. Furthermore, it appeared that the fluorinated substituents on the tris(pyrazolyl)borate were important for this high level of growth inhibition. Against two species of Gram-negative bacteria, including Pseudomonas aeruginosa, the fluorinated silver(I) tris(pyrazolyl)borate exhibited a moderate level of growth inhibition (similar to that of silver sulfadiazine), while the sodium analog showed very little ability to inhibit growth, indicating that for the Gram-negative species, the apparent responsible antimicrobial portion is the silver ion.

Effect of Intracoronal Bleaching Agents on Dentin Microhardness

The purpose of this in vitro study was to compare the effect of intracoronal bleaching agents associated or unassociated with chlorhexidine gel on dentin microhardness. Sixty human maxillary incisor crowns were divided into six groups, and bleaching agents were sealed into the pulp chambers as follows: sodium perborate + water (SPW), sodium perborate + 2% chlorhexidine gel (SP + CHX), sodium perborate + 30% hydrogen peroxide solution (SP + HP), 37% carbamide peroxide gel (CP), 37% carbamide peroxide gel + 2% chlorhexidine gel (CP+CHX), and water (W). After the bleaching procedure, microhardness testing was carried out on the dentin surface at three different levels: inner, middle, and outer dentin. The greatest reduction in microhardness was observed for the SP + HP group. No differences were observed between the SPW and SP + CHX group. The 2% chlorhexidine gel did not adversely affect dentin microhardness when associated with the tested bleaching agents. CHX might be considered as an antimicrobial vehicle during intracoronal bleaching.

On the effect of tetraborate ions in the generation of colored products in thermally processed glycine-carbohydrate solutions

The effect of tetraborate ions on Maillard browning was investigated in a series of monosaccharide-glycine reactions in aqueous bis-tris buffer at pH 7.2. Addition of borax (sodium tetraborate) in catalytic amounts led to enhanced browning measured by absorbance at 420 nm in the order xylose > arabinose > galactose approximately = fructose > ribose > mannose > rhamnose, and the degree of browning with borax was uniformly greater than that produced by phosphate on an equimolar basis. A mechanism is proposed for borax catalysis in which monosaccharide-borate complexation shifts carbohydrate equilibria to favor open-chain (carbonyl) forms, thereby enhancing the rate of the Maillard reaction.

Fire resistance of Douglas fir (Pseudotsuga menzieesi) treated with borates and natural extractives

The objective of this study was to determine fire resistance of Douglas fir (Pseudotsuga menzieesi (Mirb.) Franco) specimens treated with borate supplemented aqueous solutions of brutia pine bark powder, acorn powder, sumach leaf powder, and gall-nut powder. Boric acid (BA) and borax (BX) were used as borates which are the most commonly used fire retardants in wood preservation industry. Natural extractives (brutia pine bark powder, sumach leaf powder, acorn powder, and gall-nut powder) were also used which have toxic efficiency against insects and fungi due to their tannin contents. A commercial treatment compound Tanalith-CBC (copper-borate-chromate), which is an impregnation chemical, is used for comparison. The fire test method was performed in three stages: flame stage, without flame stage, and glowing stage. Results indicated that the lowest temperature for flame stage, without flame stage, and glowing stage were obtained for specimens treated with BA and BX mixture (7:3; weight:weight). The lowest mass loss was found for the specimens treated with a mixture of BA and BX. Natural extractives did not improve fire resistance of the samples. However, boric acid and borax had excellent fire retardant effectiveness over untreated and treated samples with natural extractives.

Crucial role of antioxidant proteins and hydrolytic enzymes in pathogenicity of Penicillium expansum: analysis based on proteomics approach

Penicillium expansum, a widespread filamentous fungus, is a major causative agent of fruit decay and may lead to the production of mycotoxin that causes harmful effects on human health. In this study, we compared the cellular and extracellular proteomes of P. expansum in the absence and presence of borate, which affects the virulence of the fungal pathogen. The differentially expressed proteins were identified using ESI-Q-TOF-MS/MS. Several proteins related to stress response (glutathione S-transferase, catalase, and heat shock protein 60) and basic metabolism (glyceraldehyde-3-phosphate dehydrogenase, dihydroxy-acid dehydratase, and arginase) were identified in the cellular proteome. Catalase and glutathione S-transferase, the two antioxidant enzymes, exhibited reduced levels of expression upon exposure to borate. Because catalase and glutathione S-transferase are related to oxidative stress response, we further investigated the reactive oxygen species (ROS) levels and oxidative protein carbonylation (damaged proteins) in P. expansum. Higher amounts of ROS and carbonylated proteins were observed after borate treatment, indicating that catalase and glutathione S-transferase are important in scavenging ROS and protecting cellular proteins from oxidative damage. Additionally to find secretory proteins that contribute to the virulence, we studied the extracellular proteome of P. expansum under stress condition with reduced virulence. The expression of three protein spots were repressed in the presence of borate and identified as the same hydrolytic enzyme, polygalacturonase.

Application of microchip-CE electrophoresis to follow the degradation of phenolic acids by aquatic plants

In this paper, we describe the separation and detection of six phenolic acids using an electrophoretic microchip with pulsed amperometric detection (PAD). The selected phenolic acids are particularly important because of their biological activity. The analysis of these compounds is typically performed by chromatography or standard CE coupled with a wide variety of detection modes. However, these methods are slow, labor intensive, involve a multistep solvent extraction, require skilled personnel, or use bulky and expensive instrumentation. In contrast, microchip CE offers the possibility of performing simpler, less expensive, and faster analysis. In addition, integrated devices can be custom-fabricated and incorporated with portable computers to perform on-site analysis. In the present report, the effect of the separation potential, buffer pH and composition, injection time and PAD parameters were studied in an effort to optimize both the separation and detection of these phenolic acids. Using the optimized conditions, the analysis can be performed in less than 3 min, with detection limits ranging from 0.73 microM (0.10 microg/mL) for 4-hydroxyphenylacetic acid to 2.12 microM (0.29 microg/mL) for salicylic acid. In order to demonstrate the capabilities of the device, the degradation of a mixture of these acids by two aquatic plants was followed using the optimized conditions.

Microwave assisted oxidation of some aromatics by hydrogen peroxide at supported tungsten catalyst

The oxidation of some arenes with the alkyl side groups by means of hydrogen peroxide is been presented. As the activator of hydrogen peroxide tungstoboric acid was chosen. The catalyst was examined under both homogeneous and heterogeneous conditions. The reactions under conventional conditions were compared with the microwave assisted reactions.

Structure of plastocyanin from the cyanobacterium Anabaena variabilis

Plastocyanin from the cyanobacterium Anabaena variabilis was heterologously produced in Escherichia coli and purified. Plate-like crystals were obtained by crystallization in 1.15 M trisodium citrate and 7.67 mM sodium borate buffer pH 8.5. The crystals belong to the orthorhombic space group P2(1)2(1)2(1), with unit-cell parameters a = 67.85, b = 45.81, c = 63.41 Angstrom. The structure of the oxidized protein was solved to a resolution of 1.6 Angstrom using plastocyanin from Phormidium laminosum as a search model. Two molecules were found in the asymmetric unit. The electrostatic surface of the basic protein showed a large population of positively charged residues in the northern site, whereas the eastern site lacked the two strongly negatively charged patches. The copper ion was found to be relatively mobile and there were two distinct conformations of His61.

Efficient enantioselective hydrolysis of d,l-phenylglycine methyl ester catalyzed by immobilized Candida antarctica lipase B in ionic liquid containing systems

Immobilized Candida antarctica lipase B (Novozym 435)-catalyzed enantioselective hydrolysis of D,L-phenylglycine methyl ester to enatiopure D-phenylglycine was successfully conducted in the systems with ionic liquids (ILs). Novozym 435 exhibited excellent activity and enantioselectivity in the system containing the IL BMIMxBF(4) compared to several typical organic solvents tested. It has been found that the cations and, particularly, the anions of ILs have a significant effect on the reaction, and the IL BMIMxBF(4), which shows to be the most suitable for the reaction, gave the highest initial rate and enantioselectivity among various ILs examined. The reaction became much less active and enantioselective in the systems with BMIMxHSO(4). Also, it was noticed that the enzymatic hydrolysis was strongly dependent on BMIMxBF(4) content in the co-solvent systems and the favorable content of the IL was 20% (v/v). Of the assayed four co-solvents and phosphate buffer, the lowest apparent K(m) and activation energy, and the highest V(max) of the reaction were achieved using 20% (v/v) BMIMxBF(4) co-solvent with phosphate buffer. Additionally, various influential variables were investigated. The optimum pH, substrate concentration, reaction temperature and shaking rate were 8.0, 80mM, 25-30 degrees Celsius and 150rpm, respectively, under which the initial rate, the residual substrate e.e. and the enantioselectivity were 2.46mM/min, 93.8% (at substrate conversion of 53.0%) and 38, respectively. When the hydrolysis was performed under reduced pressure, the initial rate (2.64mM/min) and the enantioselectivity (E=43) were boosted.

Antimicrobial properties of highly fluorinated silver(I) tris(pyrazolyl)borates

Highly fluorinated tris(pyrazolyl)borate ligand [HB(3,5-(CF3)2Pz)3]- has been used in the isolation of air- and light-stable silver complex, [HB(3,5-(CF3)2Pz)3]Ag(OSMe2). It is a monomeric tetrahedral silver complex with an O-bonded dimethylsulfoxide ligand. The silver adduct [HB(3,5-(CF3)2Pz)3]Ag(OSMe2) and the related [HB(3,5-(CF3)2Pz)3] Ag(THF) (where OSMe2 = dimethyl sulfoxide; THF = tetrahydrofuran) show good antibacterial activity, and their antimicrobial efficacy against Staphylococcus aureus is greater than those of AgNO3 and silver sulfadiazine.

Exposure of nuclear antigens in formalin-fixed, paraffin-embedded necropsy human spinal cord tissue: Detection of NeuN

Immunohistochemical and immunofluorescence staining approaches are powerful tools for characterization of the endogenous protein expression and subcellular compartmentalization. However, several technical problems hamper identification of low-abundance nuclear proteins in archival formalin-fixed, paraffin-embedded human neural tissue. These include loss of protein antigenicity during tissue fixation and processing, and intrinsic auto-fluorescence associated with the tissue related to its fixation and the presence of lipofuscin. We evaluated several antigen retrieval methods to establish a strategy for detection of neuronal nuclear proteins in human spinal cord formalin-fixed, paraffin-embedded tissue. Thus, using immunostaining of the neuron-specific nuclear protein NeuN as the outcome measure, we found that heating tissue sections in an alkaline pH buffer unmasked protein epitopes most effectively. Moreover, staining by immunohistochemistry with diaminobenzidine tetrahydrochloride chromagen was superior to immunofluorescence labeling, likely due to the signal amplification steps included in the former approach. Auto-fluorescence in the tissue sections can be effectively reduced, but a sufficient fluorescence signal associated with specific antibody labeling could not be detected above this background for NeuN in the nucleus.

In vitro antimicrobial activity of Fill Canal, Sealapex, Mineral Trioxide Aggregate, Portland cement and EndoRez

AIM

To determine in vitro the antimicrobial activity of Fill Canal, Sealapex, Mineral Trioxide Aggregate (MTA), Portland cement and EndoRez on various species of microorganisms.

METHODOLOGY

The diffusion method on Müller-Hinton agar (MH) was employed. A base layer was made using MH agar and five wells were made by removing agar at equidistant points. Sealers were placed into the wells immediately after manipulation. The microorganisms Enterococcus faecalis ATCC 29212, Escherichia coli ATCC 25922, Micrococcus luteus ATCC 9341, Staphylococcus aureus ATCC 25923, Staphylococcus epidermidis ATCC 12228, Pseudomonas aeruginosa ATCC 27853 and Candida albicans ATCC 10231 were seeded by pour plate. The plates were kept at room temperature for 2 h for prediffusion and then incubated at 37 degrees C for 24 h. Aliquots of 10 mL of 0.05% triphenyltetrazolium chloride gel were added for optimization and the zones of inhibition were measured.

RESULTS

Sealapex and Fill Canal demonstrated antimicrobial activity for all strains. For MTA and Portland cement, only E. coli was not inhibited. No antimicrobial activity was detected for EndoRez.

CONCLUSIONS

In this laboratory study, Fill Canal, Sealapex, MTA and Portland cement presented antimicrobial activity whilst EndoRez did not.

Effect of bleaching agents on bonding to pulp chamber dentine

AIM

To determine the effect of intracoronal bleaching agents on adhesion of bonding agents to pulp chamber dentine.

METHODOLOGY

Forty extracted human maxillary anterior teeth were randomly divided into four groups of 10 teeth each. Bleaching agents were sealed in pulp chambers for 7 days, as in clinical use. Group 1 (control): distilled water, group 2: 35% hydrogen peroxide, group 3: sodium perborate mixed with water, and group 4: sodium perborate mixed with 35% hydrogen peroxide. Teeth were stored in saline at 37 degrees C for 7 days. After the bleaching agent was removed, teeth were leached in water for a further 7 days prior to bonding. The crown was cut vertically from mesial to distal and the labial pulp chamber dentine was prepared for bonding with Clearfil SE-Bond and filled with resin composite (Clearfil AP-X). The bonded specimens were kept moist at 37 degrees C for 24 h. Microtensile bond strengths were determined using a universal testing machine. Additional teeth were prepared using the same bleaching procedures to investigate the scanning electron microscopic appearance of the dentine surface.

RESULTS

Mean values (+/-SD) of microtensile bond strength for the experimental groups were: group 1: 5.29 +/- 2.21 MPa, group 2: 5.99 +/- 1.51 MPa, group 3: 9.17 +/- 1.65 MPa and group 4: 3.99 +/- 1.31 MPa. Dentine treated with sodium perborate in water (group 3) had significantly higher mean bond strength when compared with the other three groups (P < 0.05, Tukey's test). Mean bond strength was lowest when dentine was treated with sodium perborate plus hydrogen peroxide (group 4).

CONCLUSIONS

In terms of subsequent bond strength during restoration, sodium perborate mixed with distilled water appears to be the best intracoronal bleaching agent.

Influence of apical patency and filling material on healing process of dogs' teeth with vital pulp after root canal therapy

The purpose of this study was to investigate the periapical healing process of dogs' teeth with or without apical patency and after root canal filling with two types of sealers. Forty roots of premolars and incisors were utilized. The root canals were overinstrumented and dressed with a corticosteroid-antibiotic solution for 7 days to obtain ingrowth of periapical connective tissue into the canals. After this period, the tissue was removed in half of the specimens (groups with patency) and preserved in the other half (groups without patency). Canals were filled by lateral condensation technique with gutta-percha points and either a calcium hydroxide-based sealer (Sealer Plus) or a Grossman's cement (Fill Canal). The animals were killed by anesthetic overdose 60 days after the endodontic treatment and anatomic pieces were obtained and prepared for histologic examination. Data were evaluated in a blind analysis on the basis of several histomorphologic parameters. The groups without patency had better results (p=0.01) than those in which the ingrown connective tissue was removed. Comparing the sealers, Sealer Plus had significantly better results (p=0.01) than Fill Canal. In conclusion, both the apical patency (presence or absence) and the type of root canal filling material influenced the periapical healing process in dogs' teeth with vital pulp after root canal treatment. The use of a calcium hydroxide-based sealer in teeth without apical patency yielded the best results among the experimental conditions proposed.

[The effect of regular scaling on periodontal health in fixed orthodontic treatment]

PURPOSE

The purpose of this study was to investigate the effect of scaling and teeth brushing with YAHAO toothpaste (eugenol and borax cream) on periodontal health in fixed orthodontic treatment.

METHODS

48 patients who needed fixed orthodontics were chosen to enroll a single-blind randomized study. The patients were randomly divided into two groups: the control group and the treatment group. Patients in the treatment group were treated with scaling and teeth brushing with YAHAO toothpaste. The changes of GI, PLI and SBI were recorded at the beginning of the treatment and after 3 months. SPSS 10.0 software package was used for Student's t test and Chi-square test.

RESULTS

There was no significant difference in the periodontal indexes between the two groups before treatment. But there was a statistically significant difference in the incidence of gingivitis (P<0.01) between the two groups after treatment.

CONCLUSION

The increase in the periodontal index and the rate of gingivitis in the treatment group were statistically significantly lower than that in the control group, which means that using scaling and teeth brushing with YAHAO toothpaste can effectively reduce the rate of gingivitis.

Noncovalent inhibition of the serine proteases, alpha-chymotrypsin and trypsin by trifluoro(organo)borates

A series of potassium organotrifluoroborates were synthesized. Their stability to hydrolysis was determined in D2O, TRIS and phosphate buffer. It was found that in both D2O and TRIS buffers, these compounds are quite stable, whereas in phosphate buffer rapid hydrolysis occurs. Based on these results, a study was undertaken to determine whether potassium organotrifluoroborates can serve as protease inhibitors. It was found that potassium organotrifluoroborates increased inhibition by at least an order of magnitude over the corresponding boronates. Dixon plots showed that these compounds are reversible competitive inhibitors of alpha-chymotrypsin and trypsin. Based on 19F NMR, we speculate that they inactivate the enzymes as a result of the formation of hydrogen-bonds between fluorine atoms of the inhibitors and the serine protease.

Hardness of heat-polymerized acrylic resins after disinfection and long-term water immersion

STATEMENT OF THE PROBLEM

In selecting a disinfectant for dental prostheses, compatibility between the disinfectant and the type of denture base material must be considered to avoid adverse effects on the hardness of the acrylic resin.

PURPOSE

This study investigated the hardness of 2 denture base resins after disinfection and long-term water immersion.

MATERIAL AND METHODS

Thirty-two disk-shaped specimens (13 mm in diameter and 8 mm thick) were fabricated from each resin (Lucitone 550 and QC-20), polished, stored in water at 37 degrees C for 48 hours, and submitted to hardness tests (Vickers hardness number [VHN]) before disinfection. Disinfection methods included scrubbing with 4% chlorhexidine gluconate for 1 minute, immersion for 10 minutes in 1 of the tested disinfectant solutions (n=8) (3.78% sodium perborate, 4% chlorhexidine gluconate, or 1% sodium hypochorite), and immersion in water for 3 minutes. The disinfection procedures were repeated 4 times, and 12 hardness measurements were made on each specimen. Control specimens (not disinfected) were stored in water for 56 minutes. Hardness tests (VHN) were also performed after 15, 30, 60, 90, and 120 days of storage in water. Statistical analyses of data were conducted with a repeated measures 3-way analysis of variance (ANOVA) and Tukey post-hoc test (alpha=.05).

RESULTS

Mean values +/- SD for Lucitone 550 (16.52 +/- 0.94 VHN) and QC-20 (9.61 +/- 0.62 VHN) demonstrated a significant (P <.05) decrease in hardness after disinfection, regardless of material and disinfectant solutions used (Lucitone 550: 15.25 +/- 0.74; QC-20: 8.09 +/- 0.39). However, this effect was reversed after 15 days of storage in water. Both materials exhibited a continuous increase (P <.05) in hardness values for up to 60 days of water storage, after which no significant change was observed.

CONCLUSION

Within the limitations of this in vitro study, QC-20 and Lucitone 550 specimens exhibited significantly lower hardness values after disinfection regardless of the disinfectant solution used.

Evaluation of biocompatibility of sodium perborate and 30% hydrogen peroxide using the analysis of the adherence capacity and morphology of macrophages

OBJECTIVE

The purpose of this study was to evaluate the biocompatibility of the most used bleaching materials for pulpless teeth, sodium perborate and 30% hydrogen peroxide, in an experimental model of macrophages, through analysis of the adherence index and the cellular morphology.

METHODS

Inflammatory macrophages were obtained from peritoneal washed of Wistar rats. The evaluation of the adherence capacity of these cells to the plastic surface was conducted in Eppendorf tubes containing RPMI, after treatment with the bleaching agents diluted in 1:10, 1:100 and 1:1000 for 15 and 30 min, and incubation at 37 degrees C and humidified atmosphere of 5% CO(2) in air. The cellular morphology was verified after incubation of the cells treated with the bleaching agents in culture plaques and compared with normal cells in culture medium.

RESULTS

Results showed that sodium perborate neither increased the adherence index, nor altered the cellular morphology when compared to the control group. The distribution, cellular morphology, cytoplasmatic and nuclear characteristics, reproduced the aspects observed in normal macrophages. However, the treatment with 30% hydrogen peroxide presented an increase in adherence index when compared to the control group (RPMI), in all dilutions, according to Mann-Whitney test (n=08 and p=0.001 for dilutions 1:10 and 1:100, and n=08 and p=0.004 for dilution 1:1000). The morphology of the cells treated with this product presented structural alterations proportionally greater, depending on the dilution of this bleaching agent, and even in the highest dilution (1:1000) the cells presented very evident alterations.

CONCLUSIONS

This irreversible cellular damage as well as the elevation of the adherence index, characterizes the aggressive potential of 30% hydrogen peroxide, regardless of its dilution. Sodium perborate, on the other hand, showed biocompatibitity, since, no morphological nor functional alteration was observed in macrophages.

Prominent role of γ -glutamyl-transpeptidase on the growth of Helicobacter pylori

AIM: γ -glutamyl transpeptidase (GGT) has been reported as a virulence and colonizing factor of Helicobacter pylori (H pylori). This study examined the effect of GGT on the growth of H pylori.

METHODS: Standard H pylori strain NCTC 11637 and 4 clinical isolates with different levels of GGT activity as measured by an enzymatic assay were used in this study. Growth inhibition and stimulation studies were carried out by culturing H pylori in brain heart infusion broth supplemented with specific GGT inhibitor (L-serine sodium borate complex, SBC) or enhancer (glutathione together with glycyl-glycine), respectively. The growth profiles of H pylori were determined based on viable bacterial count at time interval.

RESULTS: Growth was more profuse for H pylori isolates with higher GGT activity than those present with lower GGT activity. However, in the presence of SBC, growth of H pylori was retarded in a dose dependent manner (P = 0.034). In contrast, higher growth rate was observed when GGT activity was enhanced in the presence of glutathione and glycyl-glycine.

CONCLUSION: Higher GGT activity provides an advantage to the growth of H pylori in vitro. Inhibition of GGT activity by SBC resulted in growth retardation. The study shows that GGT plays an important role on the growth of H pylori.

Effect of traditional and alternative intracoronal bleaching agents on microhardness of human dentine

The purpose of this study was to compare the effect of traditional and alternative bleaching agents on microhardness of human dentine when used intracoronally. Thirty-six premolars were divided into six groups and bleaching agents were sealed into the pulp chambers as follows: group 1--distilled water (control), group 2--30% hydrogen peroxide solution, group 3--sodium perborate mixed with distilled water, group 4--sodium perborate mixed with 30% hydrogen peroxide solution, group 5--35% carbamide peroxide gel, group 6--35% hydrogen peroxide gel. Access cavities were sealed and the teeth were stored in distilled water at 37 degrees C. After 7 days, each tooth was sectioned at the cemento-enamel junction level and microhardness testing was carried out on dentine. The results showed that treatment with 35% hydrogen peroxide gel, 30% hydrogen peroxide solution and 35% carbamide peroxide gel reduced the microhardness of outer dentine to a small extent while treatment with sodium perborate mixed with water and sodium perborate mixed with 30% hydrogen peroxide solution did not significantly alter the microhardness of dentine.