Laser-induced plasma imaging for low-pressure detection

A novel technique based on laser induced plasma imaging is proposed to measure residual pressure in sealed containers with transparent walls, e.g. high voltage vacuum interrupter in this paper. The images of plasma plumes induced on a copper target at pressure of ambient air between 10^-2Pa and 10⁵Pa were acquired at delay times of 200ns, 400ns, 600ns and 800ns. All the plasma images at specific pressures and delay times showed a good repeatability. It was found that ambient gas pressure significantly affects plasma shape, plasma integral intensities and expansion dynamics. A subsection characteristic method was proposed to extract pressure values from plasma images. The method employed three metrics for identification of high, intermediate and low pressures: the distance between the target and plume center, the integral intensity of the plume, and the lateral size of the plume, correspondingly. The accuracy of the method was estimated to be within 15% of nominal values in the entire pressure range between 10^-2Pa and 10⁵Pa. The pressure values can be easily extracted from plasma images in the whole pressure range, thus making laser induced plasma imaging a promising technique for gauge-free pressure detection.

The distribution and seasonal variations of sedimentary organic matter in the East China Sea shelf

We sampled the surface sediments of the East China Sea shelf (ECSS) in spring and autumn, 2014, and analyzed the biogenic element concentrations and stable carbon (δ¹³C) and nitrogen (δ¹⁵N) isotopic compositions to study the distribution and seasonal variations of sedimentary organic matter (OM). The average concentrations of TOC, TN and OP in autumn decreased obviously compared with those in spring. The increase of δ¹⁵N values in autumn indicated the priority utilization of ¹⁴N by bacterial decomposition activity. The values of δ¹³C were used to trace organic matter sources. The estimated percentages for terrestrial OM were in the range of 0-34.6%. They generally decreased seaward in nearshore areas, indicating the decrease of terrigenous influence. There was an obvious tongue-shaped region with relatively low percentages of terrestrial OM (<12%) in the northern part of the ECSS, which may be a reflection of the intrusion pathway of the outer seawater.

Source identification and risk assessment based on fractionation of heavy metals in surface sediments of Jiaozhou Bay, China

To identify sources and evaluate ecological risks of heavy metals in sediments of Jiaozhou Bay, contents and chemical fractions of Cd, Cr, Cu, Pb, Zn, Ni, Sb and Sn were studied. Results suggested that higher metal contents appeared at inner bay and near marine dumping area. Labile fractions of heavy metals accounted for 0.5-77% (~36%) of total contents indicating their significant anthropogenic sources. The enrichment levels of Cd and Sb were relatively higher. Cu, Ni, Cd and Zn were at low to medium risks. Cr, Pb, Sn and Sb were at no or low risks. Total contents of heavy metals were mainly controlled by natural sources, while anthropogenic inputs were important sources of labile fractions of heavy metals in sediments of Jiaozhou Bay with industrial and domestic activities as main contributors for Cu, Pb, Zn, Cr, Ni and Sn, and agricultural activities for Cd and regional coal combustion for Sb.

Metals in size-fractionated core sediments of Jiaozhou Bay, China: Records of recent anthropogenic activities and risk assessments

Total contents and chemical speciation of Co, Ni, Cu, Ga, Mo, Cd, In, Sn, Sb, V, W, Tl, Bi and U in size-fractionated (<32, 32-63 and >63μm) core sediments from Jiaozhou Bay were investigated to reveal their responses to anthropogenic activities. Metal contents showed a decreasing trend with increasing grain sizes. However, the loadings of metal fraction on <32, 32-63 and >63μm grain sizes were 16%, 47% and 37%, respectively. Anthropogenic fluxes and enrichment factors of metals in >63μm fraction were closely linked to anthropogenic activities, with an obvious increase in upper 27cm (1998-2015) and a slight decrease in 2009year. Metals (especially for Cd, Co, Cu and Ni) in >63μm fraction were more easily released, with the highest percentage of acid soluble form and lowest residual form. Thus, the size fraction of >63μm cannot be ignored.

Comparative Study for the Association of Mitochondrial Haplogroup F+ and Metabolic Syndrome between Longevity and Control Population in Guangxi Zhuang Autonomous Region, China

BACKGROUND

Our previous study suggested that mitochondrial haplogroup F (mtDNA F) was a longevity-associated biomarker, but the effect of mitochondrial haplogroup F on longevity individuals with metabolic syndrome (MetS) was not clear. Thus we explored the association between mtDNA F and MetS among longevity and control population in Guangxi Zhuang Autonomous Region, China.

METHOD

A total of 793 individuals consisting of 307 long-lived participants and 486 local healthy controls were involved in this study. Genotypes of mtDNA F were amplified by polymerase chain reaction and Sanger sequenced. MetS was defined according to the revised National Cholesterol Education Program's Adult Treatment Panel III (NCEP ATPIII ) criteria.

RESULTS

The prevalence of MetS in longevity group (28.0%) was higher than that (18.5%) in control group (P=0.002). Through the case-control stratify analysis, the prevalence of MetS in mtDNA F+ longevity individuals (29.8%) was 4.6 fold higher than that (5.3%) in local control group (P<0.001). However, after further longevity-only analysis, no association between MetS and mtDNA F+ in longevity group was observed (P=0.167). Following same analysis of two variables in control group, we found that the prevalence of MetS in mtDNA F- (95.8%) was higher than that in mtDNA F+ (5.3%); conversely, the prevalence of non-metabolic syndrome (NMetS) in mtDNA F+ (94.7%) was markedly higher than that in mtDNA F- (4.2%) (P<0.001).

CONCLUSION

We demonstrated that mtDNA F+ , as a molecuar biomarker, might not only confer beneficial effect to resistance against MetS but also function as a positive factor for long-life span among the population in Guangxi Zhuang Autonomous Region, China.

The effect of aspirin on circulating tumor cells in metastatic colorectal and breast cancer patients: a phase II trial study

PURPOSE

Aspirin could reduce the risk of cancer metastasis. Circulating tumor cells (CTCs) are a key factor of cancer metastasis, but no evidence has revealed how aspirin affects CTCs and its epithelial-mesenchymal transition (EMT). Here, we conducted a clinical trial to investigate how aspirin affects CTCs in metastatic colorectal cancer (MCC) and breast cancer patients (MBC).

METHODS

The trial is retrospective registered at clinicaltrials.gov (NCT02602938). The eligible patients are given 100 mg aspirin q.d. for 8 weeks, and CTCs are evaluated at baseline, 4 and 8 weeks for absolute number, phenotype (epithelial type, E+, mesenchymal type, M+, and biophenotypic type, B+), and vimentin expression.

RESULTS

Data on 21 MCC and 19 MBC patients are analyzed, and it revealed that the CTC numbers decreased with aspirin treatment in MCC (p < 0.001) but not MBC (p = 0.0532); besides, ratio of E+ CTCs increased (p = 0.037) and M+ CTCs decreased at 2 months in MCC (p = 0.013), but neither the ratio of E+ or M+ CTCs changes significantly in MBC; vimentin expression of M+ CTCs is higher than E+ and B+ CTCs either in MBC or MCC patients at baseline (p < 0.01); and aspirin suppresses the vimentin expression in M+ (p = 0.002)and B+ (p = 0.006) CTCs of MCC and M+ CTCs of MBC (p = 0.004); besides it find vimentin expression in B+ (p = 0.004) or M+ (p < 0.001), CTCs are markedly decreased in patients with total CTC numbers declined.

CONCLUSION

Aspirin could decrease CTCs numbers and block EMT transition in MCC patients and part of MBC patients.

[Efficacy of 3D print guide technique in one stage posterior approach for the treatment of cervical and thoracic tuberculosis with kyphosis]

Objective: To investigate the application of 3D printing technology in the treatment of patients with cervical kyphosis and paraplegia in different segments of the cervical spine after one-stage debridement, bone graft fusion and pedicle screw fixation. Methods: From January 2008 to January 2017, a total of 31 patients with thoracolumbar tuberculosis were treated in the Department of Orthopaedics, the Xinjiang Uygur Autonomous Region people's Hospital.Lesions of the thoracic spine (T1-T4) in 8 cases, (C5-C7) in 10 cases, cervical and thoracic segment in 13 cases, involving a total of 2 cases of vertebral body in 7 cases, 3 cases of vertebral body in 14 cases, 4 cases of vertebral body. 3D printing group (group A) 12 cases, non 3D printing group (group B) of 19 cases.All cases were treated with a posterior approach to the treatment of the cervical spinal cord around the spinal cord.After taking regular anti tuberculosis drugs in 6-12 months, follow-up observation of correction of kyphosis and paraplegia recovery, blood sedimentation rate (ESR), C-reactive protein (CRP) changes. Results: All cases were followed up for at least 6 months. Twelve patients were treated with 3D printing technique before operation, and the operation was performed according to the preoperative plan.The diameter and length of pedicle screws, the direction of insertion, and the distance between the insertion point and the posterior midline of the pedicle screw were similar to those in the 3D.Three days after the operation, the effect of fracture reduction was satisfactory, and the position of pedicle screws was good.After 6 months of follow-up, the X-ray showed that the pedicle screws were in good position, and there was no loosening and fracture.All the patients were healed, and there was no segmental instability.3D printing group during surgery bleeding, operation time, postoperative drainage volume, compared with the non 3D print group of surgical results, 3D printing group significantly reduce the surgical trauma[(131±18) min vs (162±23), P<0.01; (528±34) ml vs (615±41) ml, P<0.01; (257±46) vs (327±56), P<0.01; (not grouping, before after operation), (64±42) mm/1 h vs (6±7) mm/1 h, P<0.01; CRP (not packet): (72±41) μg/L, (13±6) mm/1 h, P<0.01]. There was significant difference between two groups.The JOA scores of patients in the 3D group were better than those in the non 3D group after the operation in 1, 2 week and in 1, 3, and month.There was no significant difference between the two groups after the operation.Two groups of patients before and after correction of Cobb angle were satisfied, and no significant difference between the two groups.Cobb lost an average of 1 degrees angle correction.The spinal tuberculosis in this group were cured without serious complications. Conclusions: According to the cervical and thoracic tuberculous kyphosis and paraplegia severity, choose a posterior surgery can achieve effective cure, feasible thorough debridement with fixed spinal stability before and after the party obtained bone fusion and deformity correction in 3D technology to increase the accuracy and safety of operation, and can be provide more detailed preoperative, intuitive, three-dimensional, realistic personalized operation scheme.It can reduce the operation trauma, and achieve rapid recovery after operation.

Effect of zoledronic acid therapy on postmenopausal osteoporosis between the Uighur and Han population in Xinjiang: An open-label, long-term safety and efficacy study

WHAT IS KNOWN AND OBJECTIVE

Postmenopausal osteoporosis is becoming an urgent health problem in China. A once-yearly infusion of zoledronic acid can be very effective for the treatment of postmenopausal osteoporosis in significantly reducing the risk of hip, vertebral and other fractures. This study aimed to investigate zoledronic acid treatment on postmenopausal osteoporosis in Uighur and Han patients in Xinjiang province, China.

METHODS

A self-controlled and prospective trial design was adopted. A total of 155 Uighur and 151 Han patients were enrolled. All subjects received an intravenous infusion of zoledronic acid (5 mg) at day 0 (baseline) and at 12 months. Patients were followed up for 24 months; the bone mineral density (BMD) of the left total hip and L1-L4 vertebrae was measured at day 0 and at 24 months.

RESULTS AND DISCUSSION

BMD was significantly higher after zoledronic acid treatment compared with baseline levels in all patients, as assessed at 24 months. Moreover, the BMD of left total hip increased with 2.7% in the Han group was significantly higher than that of the Uighur group with 1.4% (left total hip, 95% CI: 2.6% to 2.8% in Han group vs 1.2% to 1.4% in Uighur group). The BMD of L1-L4 vertebrae increased with 2.2% in the Han group was significantly higher than that of the Uighur group with 1.6% (L1-L4 vertebrae, 95% CI, 2.0% to 2.4% in Han group vs 1.4% to 1.7% in Uighur group); P < .001. There was no significant difference in drug-related adverse effects between the two groups (P > .05).

WHAT IS NEW AND CONCLUSION

Zoledronic acid appears to be more effective in postmenopausal osteoporosis in Han than in Uighur subjects. The reasons for this require further investigation.

Highly controllable direct femtosecond laser writing of gold nanostructures on titanium dioxide surfaces

A highly reproducible and controllable deposition procedure for gold nanostructures on a titanium dioxide (TiO₂) surface using femtosecond laser light has been demonstrated. This is realized by precisely focusing onto the TiO₂ surface in the presence of a pure gold ion solution. The deposition is demonstrated both in dot arrays and line structures. Thanks to the multi-photon excitation, we observe that the deposition area of the nanostructures can be confined to a degree far greater than the diffraction limited focal spot. Finally, we demonstrate that catalytic activity with visible light irradiation is enhanced, proving the applicability of our new deposition technique to the catalytic field.

Speciation of heavy metals in different grain sizes of Jiaozhou Bay sediments: Bioavailability, ecological risk assessment and source analysis on a centennial timescale

Heavy metal contamination is an essential indicator of environmental health. In this work, one sediment core was used for the analysis of the speciation of heavy metals (Cr, Mn, Ni, Cu, Zn, As, Cd, and Pb) in Jiaozhou Bay sediments with different grain sizes. The bioavailability, sources and ecological risk of heavy metals were also assessed on a centennial timescale. Heavy metals were enriched in grain sizes of < 63µm and were predominantly present in residual phases. Moreover, the mobility sequence based on the sum of the first three phases (for grain sizes of < 63µm) was Mn > Pb > Cd > Zn > Cu >Ni > Cr > As. Enrichment factors (EF) indicated that heavy metals in Jiaozhou Bay presented from no enrichment to minor enrichment. The potential ecological risk index (RI) indicated that Jiaozhou Bay had been suffering from a low ecological risk and presented an increasing trend since 1940s owing to the increase of anthropogenic activities. The source analysis indicated that natural sources were primary sources of heavy metals in Jiaozhou Bay and anthropogenic sources of heavy metals presented an increasing trend since 1940s. The principal component analysis (PCA) indicated that Cr, Mn, Ni, Cu and Pb were primarily derived from natural sources and that Zn and Cd were influenced by shipbuilding industry. Mn, Cu, Zn and Pb may originate from both natural and anthropogenic sources. As may be influenced by agricultural activities. Moreover, heavy metals in sediments of Jiaozhou Bay were clearly influenced by atmospheric deposition and river input.

Potential mobility of inorganic nutrients and its controls at the sediment-water interface in the main path of Kuroshio Current off eastern Taiwan

Surface sediments were collected from the main path of Kuroshio Current (KC) off eastern Taiwan (ETW), and laboratory incubation was conducted for the study of the nutrient exchange at the sediment-water interface. Exchange fluxes of NO₃^--N, NO₂^--N, NH₄⁺-N, PO₄^3--P and SiO₃^2--Si under simulated site condition were -0.0866, 0.00146, 0.0634, -0.00812 and -0.181mmolm^-2d^-1, respectively. This indicated that sediments in the studied area might act as a source of NO₂^--N and NH₄⁺-N and a sink of NO₃^--N, PO₄^3--P and SiO₃^2--Si. Factors affecting nutrient exchange fluxes were studied by changing incubation conditions. Compared with some coastal areas in China, the main path of KC off ETW showed relatively low nutrient exchange fluxes at the sediment-water interface. It could be inferred that the sediment-water exchange of nutrients in the main path of KC off ETW had little influence on the downstream nutrient transportation by KC year-round based on the results of this research.

Crystal structure of the multiple antibiotic resistance regulator MarR from Clostridium difficile

Regulators of multiple antibiotic resistance (MarRs) are key players against toxins in prokaryotes. MarR homologues have been identified in many bacterial and archaeal species which pose daunting antibiotic resistance issues that threaten public health. The continuous prevalence of Clostridium difficile infection (CDI) throughout the world is associated with the abuse of antibiotics, and antibiotic treatments of CDI have limited effect. In the genome of C. difficile strain 630, the marR gene (ID 4913953) encodes a MarR protein. Here, MarR from C. difficile (MarRC.difficile) was subcloned and crystallized for the first time. MarRC.difficile was successfully expressed in Escherichia coli in a soluble form and was purified to near-homogeneity (>95%) by a two-step purification protocol. The structure of MarRC.difficile has been solved at 2.3 Å resolution. The crystal belonged to the monoclinic space group P43212, with unit-cell parameters a = b = 66.569, c = 83.654 Å. The structure reported reveals MarRC.difficile to be a dimer, with each subunit consisting of six α-helices and three antiparallel β-hairpins. MarRC.difficile shows high structural similarity to the MarR proteins from E. coli and Staphylococcus aureus, indicating that MarRC.difficile might be a DNA-binding protein.

MicroRNA-455 suppresses the oncogenic function of HDAC2 in human colorectal cancer

Colorectal cancer (CRC) is the fourth leading cause of cancer-induced mortality. Histone deacetylase 2 (HDAC2) is involved in prognosis and therapy of CRC. This study aimed to explore novel therapeutic targets for CRC. The alteration of HDAC2 expression in CRC tissues was estimated by qRT-PCR. After lentivirus transfection, HDAC2 knockdown was confirmed by western blot analysis. The effect of HDAC2 knockdown on cell proliferation was then assessed by 3-(4,5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide (MTT) assay. Screened by TargetScan, microRNA (miR)-455 was predicted to bind to 3′UTR of HDAC2 and the prediction was verified by luciferase assay. Finally, cells were transfected, respectively, with miR-455 mimics or miR-455 negative control (miR-NC) and the expression of HDAC2, cell proliferation and apoptosis of transfected cells were respectively evaluated by western blot analysis, MTT assay and flow cytometry. Results showed that the HDAC2 expression was up-regulated in CRC tissues (P<0.05). HDAC2 knockdown significantly decreased cell viability at day 3 (P<0.05), day 4 (P<0.01), and day 5 (P<0.001) after infection. Then, miR-455 was verified to directly target HDAC2, resulting in a significant difference in luciferase activity (P<0.01). Moreover, miR-455 decreased the expression of HDAC2 (P<0.01). miR-455 remarkably decreased cell viability at day 3 (P<0.05), day 4 (P<0.01), and day 5 (P<0.001) after transfection while inducing cell apoptosis (P<0.001). In conclusion, miR-455 inhibited cell proliferation while inducing cell apoptosis by targeting HDAC2 in CRC cells.

Analysis of genetic diversity of Leuciscus leuciscus baicalensis using novel microsatellite markers with cross-species transferability

We used next-generation sequencing technology to characterize 19 genomic simple sequence repeat (SSR) markers and 11 expressed sequence tag (EST) SSR markers from Leuciscus leuciscus baicalensis, a small freshwater fish that is widely distributed in Xinjiang, China. Primers were used to test for polymorphisms in three L. leuciscus baicalensis populations in Xinjiang. There were 4-27 (average 11.3) alleles (N_A), the expected heterozygosity (H_E) was 0.36-0.94 (average 0.75 ± 0.14), the observed heterozygosity (H_O) was 0.37-1.00 (average 0.68 ± 0.18), and the polymorphism information content (PIC) was 0.31-0.93 (average 0.71). The averages of H_E and PIC for the EST-SSR markers were slightly lower than for the genomic SSR markers. Genetic analysis of the three populations showed similar results for PIC, H_E, and N_A. Amplifications were performed in nine other species; the top three transferability values were for Rutilus lacustris (80%), Leuciscus idus (76.7%), and Phoxinus ujmonensis (63.3%), with the following average values: PIC (0.56, 4.46, and 0.52); N_A (0.40, 3.00, and 0.32); and H_O (0.44, 2.74, and 0.22), respectively. L. leuciscus baicalensis is one of the most important commercial fish in Xinjiang, but in recent years, fishery resources have decreased sharply owing to water conservation projects, unreasonable utilization, and invasion by alien species. These novel SSR markers are appropriate for studies involving fingerprinting, gene flow, genetic diversity, population structure, and molecular-assisted breeding, and could contribute to the conservation of L. leuciscus baicalensis.

Atmospheric wet deposition of dissolved trace elements to Jiaozhou Bay, North China: Fluxes, sources and potential effects on aquatic environments

To analyze the fluxes, seasonal variations, sources and potential ecological effects of dissolved trace elements (TEs) in atmospheric wet deposition (AWD), one-year wet precipitation samples were collected and determined for nine TEs in Jiaozhou Bay (JZB) between June 2015 and May 2016. Both the volume-weighted mean (VWM) concentration and flux sequence for the measured TEs was Al > Mn > Zn > Fe > Pb > Se > Cr > Cd > Co. Al was the most abundant TE with a VWM concentration and wet flux of 33.8 μg L^-1 and 29.2 mg m^-2 yr^-1, which were 2 and 3 orders of magnitude higher than those of Co, respectively. The emission intensities of pollutants, rainfall amount and wind speed were the dominating factors influencing seasonal variations of TEs in AWD. Based on enrichment factors, correlation analysis and principal component analysis, most of the TEs in AWD were primarily originated from anthropogenic activities except for Al and Fe, which are typically derived from re-suspended soil dusts. Although the TE inputs by AWD were significantly lower than those by rivers, the TE inputs via short-term heavy rains would distinctly increase surface seawater TE concentrations and then pollute the marine environment of JZB. AWD would have both profound impacts on the biogeochemical cycles of TEs and dual ecological effects (nutrient and toxicity) on aquatic organisms.

Surface-enrichment with hydroxyapatite nanoparticles in stereolithography-fabricated composite polymer scaffolds promotes bone repair

Fabrication of composite scaffolds using stereolithography (SLA) for bone tissue engineering has shown great promises. However, in order to trigger effective bone formation and implant integration, exogenous growth factors are commonly combined to scaffold materials. In this study, we fabricated biodegradable composite scaffolds using SLA and endowed them with osteopromotive properties in the absence of biologics. First we prepared photo-crosslinkable poly(trimethylene carbonate) (PTMC) resins containing 20 and 40wt% of hydroxyapatite (HA) nanoparticles and fabricated scaffolds with controlled macro-architecture. Then, we conducted experiments to investigate how the incorporation of HA in photo-crosslinked PTMC matrices improved human bone marrow stem cells osteogenic differentiation in vitro and kinetic of bone healing in vivo. We observed that bone regeneration was significantly improved using composite scaffolds containing as low as 20wt% of HA, along with difference in terms of osteogenesis and degree of implant osseointegration. Further investigations revealed that SLA process was responsible for the formation of a rich microscale layer of HA corralling scaffolds. To summarize, this work is of substantial importance as it shows how the fabrication of hierarchical biomaterials via surface-enrichment of functional HA nanoparticles in composite polymer stereolithographic structures could impact in vitro and in vivo osteogenesis.

STATEMENT OF SIGNIFICANCE

This study reports for the first time the enhance osteopromotion of composite biomaterials, with controlled macro-architecture and microscale distribution of hydroxyapatite particles, manufactured by stereolithography. In this process, the hydroxyapatite particles are not only embedded into an erodible polymer matrix, as reported so far in the literature, but concentrated at the surface of the structures. This leads to robust in vivo bone formation at low concentration of hydroxyapatite. The reported 3D self-corralling composite architecture provides significant opportunities to develop functional biomaterials for bone repair and tissue engineering.

Local induction of inflammation affects bone formation

To explore the influence of inflammatory processes on bone formation, we applied a new in vivo screening model. Confined biological pockets were first created in rabbits as a response to implanted bone cement discs. These biomembrane pockets were subsequently used to study the effects of inflammatory stimuli on ectopic bone formation within biphasic calcium phosphate (BCP) constructs loaded with TNF-α, lipopolysaccharide (LPS) or lipoteichoic acid (LTA), all with or without bone morphogenetic protein (BMP)-2. Analysis of bone formation after 12 weeks demonstrated that the inflammatory mediators were not bone-inductive in combination with the BCP alone, but inhibited or enhanced BMP-induced bone formation. LPS was associated with a strong inhibition of bone formation by BMP-2, while LTA and TNF-α showed a positive interaction with BMP-2. Since the biomembrane pockets did not interfere with bone formation and prevented the leakage of pro-inflammatory compounds to the surrounding tissue, the biomembrane model can be used for in vivo approaches to study local inflammation in conjunction with new bone formation. Using this model, it was shown that the modulation of the inflammatory response could be beneficial or detrimental to the subsequent bone formation process. The co-delivery of inflammatory factors and bone-related growth factors should be further explored as a strategy to enhance the bone-forming efficacy of bone substitutes.

Cell aggregation enhances bone formation by human mesenchymal stromal cells

The amount of bone generated using current tissue engineering approaches is insufficient for many clinical applications. Previous in vitro studies suggest that culturing cells as 3D aggregates can enhance their osteogenic potential, but the effect on bone formation in vivo is unknown. Here, we use agarose wells to generate uniformly sized mesenchymal stromal cell (MSC) aggregates. When combined with calcium phosphate ceramic particles and a gel prepared from human platelet-rich plasma, we generated a tissue engineered construct which significantly improved in vivo bone forming capacity as compared to the conventional system of using single cells seeded directly on the ceramic surface. Histology demonstrated the reproducibility of this system, which was tested using cells from four different donors. In vitro studies established that MSC aggregation results in an up-regulation of osteogenic transcripts. And finally, the in vivo performance of the constructs was significantly diminished when unaggregated cells were used, indicating that cell aggregation is a potent trigger of in vivo bone formation by MSCs. Cell aggregation could thus be used to improve bone tissue engineering strategies.

Fluxes, seasonal patterns and sources of various nutrient species (nitrogen, phosphorus and silicon) in atmospheric wet deposition and their ecological effects on Jiaozhou Bay, North China

Atmospheric wet deposition (AWD) is an important pathway for anthropogenic and natural pollutants entering aquatic ecosystems. However, the study on the magnitudes and ecological effects of AWD of various nutrient species (nitrogen, phosphorus and silicon) on Jiaozhou Bay is scarce. To address these issues, in this study, wet deposition samples were collected at a coastline site along Jiaozhou Bay from June 2015 to May 2016. Dissolved inorganic nitrogen (DIN, including NH₄-N, NO₃-N and NO₂-N), dissolved organic nitrogen (DON), dissolved inorganic phosphorus (DIP, i.e. PO₄-P), dissolved organic phosphorus (DOP) and reactive silicate (SiO₃-Si) were analyzed. The volume-weighted mean (VWM) concentrations of NH₄-N, NO₃-N and DON in AWD were higher compared with those of NO₂-N, PO₄-P, DOP and SiO₃-Si. The annual influxes of NH₄-N, NO₃-N, NO₂-N, DON, DIP, DOP, and SiO₃-Si via AWD were 92.8, 54.5, 0.427, 47.5, 0.274, 0.448 and 1.73mmol·m^-2·yr^-1 respectively; NH₄-N and DOP were the dominant species for N and P, and the roles of DON and DOP in AWD could not be neglected. Significant seasonal variations were observed in concentrations and fluxes of all nutrient species owing to the effects of rainfall, the intensities of local emission sources and the long-distance transports of natural and anthropogenic pollutants. The major sources of N, Si and P in AWD were agricultural activities, soil dust and a mixing one involving both anthropogenic and natural sources, respectively. Though AWD represents relatively low percentages of external inputs for nutrients and low contribution to primary productivity (PP) of Jiaozhou Bay, large amounts of nutrient inputs originating from sudden heavy rains may enhance PP prominently, as well as aggravate P-limitation and Si-limitation and further affect phytoplankton community structures and size-fractioned structures with the quite high DIN:DIP ratios and extremely low Si:DIN ratios in AWD.