Randomized Controlled Trial of Group Exercise Intervention for Fall Risk Factors Reduction in Nursing Home Residents

OBJECTIVE

The aim of this study was to assess the effectiveness of a multidimensional exercise intervention on improving fall risk deterrent factors, such as overall strength and flexibility in nursing home residents.

METHODS

A multi-centre, randomized controlled trial was finally utilized in 40 older adults (>65 years) who were randomly allocated to the intervention or the control group (20 subjects in each). The intervention group attended an exercise program twice a week for eight weeks, to improve functional mobility. The control group did not receive any intervention. Measurements before and after intervention included the Hand Grip Strength (HGS) testing, the Sit-to-Stand test (SST), the Back Scratch Test (BST), and the Sit-and-Reach test (SRT).

RESULTS

MANOVA revealed significant time effects, V = 0.336, F(6, 33) = 2.78, p = 0.027, partial η² = 0.336; group effects, V = 0.599, F(6, 33) = 8.22, p < 0.001, partial η² = 0.599; and group*time interaction, V = 0.908, F(6, 33) = 54.52, p < 0.001, partial η² = 0.908. A subsequent univariate analysis did not reveal a significant time effect for any variable (p > 0.05). Significant group effects were observed only for SRT (p < 0.05). Significant group*time interactions were observed for all the examined variables (p < 0.05). Dependent t-tests showed that the older adults in the exercise group were significantly improved in all the examined parameters (p < 0.05). Except for SRT (p > 0.05), all the other parameters significantly deteriorated in the control group (p < 0.05).

CONCLUSIONS

Significant improvements were demonstrated in strength and flexibility among nursing home residents following an eight-week group exercise training program.

Regulation of APD and Force by the Na+/Ca2+ Exchanger in Human-Induced Pluripotent Stem Cell-Derived Engineered Heart Tissue

The physiological importance of NCX in human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) is not well characterized but may depend on the relative strength of the current, compared to adult cardiomyocytes, and on the exact spatial arrangement of proteins involved in Ca2+ extrusion. Here, we determined NCX currents and its contribution to action potential and force in hiPSC-CMs cultured in engineered heart tissue (EHT). The results were compared with data from rat and human left ventricular tissue. The NCX currents in hiPSC-CMs were larger than in ventricular cardiomyocytes isolated from human left ventricles (1.3 ± 0.2 pA/pF and 3.2 ± 0.2 pA/pF for human ventricle and EHT, respectively, p < 0.05). SEA0400 (10 µM) markedly shortened the APD90 in EHT (by 26.6 ± 5%, p < 0.05) and, to a lesser extent, in rat ventricular tissue (by 10.7 ± 1.6%, p < 0.05). Shortening in human left ventricular preparations was small and not different from time-matched controls (TMCs; p > 0.05). Force was increased by the NCX block in rat ventricle (by 31 ± 5.4%, p < 0.05) and EHT (by 20.8 ± 3.9%, p < 0.05), but not in human left ventricular preparations. In conclusion, hiPSC-CMs possess NCX currents not smaller than human left ventricular tissue. Robust NCX block-induced APD shortening and inotropy makes EHT an attractive pharmacological model.

Application of force-monitor ultrasonography to assess distal radioulnar joint instability in patients with triangular fibrocartilage complex injury

Introduction

In this study, we evaluated the differences and measurement accuracy in the force-displacement relationship of the distal radioulnar joint (DRUJ) between patients with triangular fibrocartilage complex (TFCC) injury and healthy controls using force-monitor ultrasonography.

Methods

This study included 11 TFCC injury patients and 22 healthy controls. We evaluated differences in the force-displacement relationship of the DRUJ in these patients using force-monitor ultrasonography. Cyclic compression was applied to the dorsal surface of the ulnar head. Distance between the dorsal surface of the distal radius and ulnar head at the DRUJ level was measured in the initial and pressed-down positions. Changes in radioulnar displacement, applied force, and displacement-to-force ratio were measured. Furthermore, we compared the parameters between the affected and unaffected wrists and between TFCC injury patients and controls.

Results

The radioulnar displacement and displacement-to-force ratio were significantly larger in the affected wrists than in the unaffected wrists (P = 0.003 and P = 0.02). The affected/unaffected side ratio of radioulnar displacement and displacement-to-force ratio were significantly larger in the TFCC injury patients than in the controls (P = 0.003 and P = 0.02). The area under the curve was 0.82 for the affected/unaffected ratio of the radioulnar displacement. The optimal cutoff value indicated by the receiver-operating characteristic curve for the affected/unaffected ratio of the radioulnar displacement was 1.71; the sensitivity and specificity were 82% and 86%, respectively.

Conclusions

Assessing the DRUJ instability with force-monitor ultrasonography may help identify TFCC-injured wrists.

Data Acquisition System for On-the-Go Soil Resistance Force Sensor Using Soil Cutting Blades

Worldwide, agricultural land is a dominant part of the environment. It is very important to understand the physical properties of soil because they directly or indirectly affect the entire human population. This paper proposes a data acquisition system for an original design of the soil resistance force sensor (SRFS). It serves to evaluate the properties of soil affected and unaffected by tractor passages through the field. The SRSF uses two cutting blades to measure soil mechanical resistance within the tire track and outside the tire track. The proposed system consists of two load cells, datalogger, power supply and software for personal computers. The system was practically tested under field operation. The results showed significant differences between the soil resistance force measured outside the tire track and within the tire track after one, two and three tractor passages. The data were compared with penetrometer resistance and soil bulk density, standardly characterizing soil mechanical resistance. An increase of soil resistance force after one, two and three tractor passages corresponded with an increase in reference parameters. The results showed that the proposed system is suitable for practical applications to evaluate soil mechanical resistance using SRFS.

Hip Torque Is a Mechanistic Link Between Sprint Acceleration and Maximum Velocity Performance: A Theoretical Perspective

Sprinting performance is critical for a variety of sports and competitive activities. Prior research has demonstrated correlations between the limits of initial acceleration and maximum velocity for athletes of different sprinting abilities. Our perspective is that hip torque is a mechanistic link between these performance limits. A theoretical framework is presented here that provides estimates of sprint acceleration capability based on thigh angular acceleration and hip torque during the swing phase while running at maximum velocity. Performance limits were calculated using basic anthropometric values (body mass and leg length) and maximum velocity kinematic values (contact time, thigh range of motion, and stride frequency) from previously published sprint data. The proposed framework provides a mechanistic link between maximum acceleration and maximum velocity, and also explains why time constant values (τ, ratio of the velocity limit to acceleration limit) for sprint performance curves are generally close to one-second even for athletes with vastly different sprinting abilities. This perspective suggests that specific training protocols targeted to improve thigh angular acceleration and hip torque capability will benefit both acceleration and maximum velocity phases of a sprint.

Effect of progressive bridging exercise on weight-bearing during the extension phase of sit-to-stand, and on sit-to-stand ability in individuals with stroke: A randomised controlled trial

OBJECTIVE

To examine the effect of a progressive bridging exercise on force, time, and pressure during the extension phase of sit-to-stand, and on sit-to-stand ability in individuals with stroke.

DESIGN

A single-blinded randomised controlled trial.

SETTING

Hospital.

PARTICIPANTS

Forty-eight individuals with acute ischemic stroke, not at brainstem and cerebellum, randomly allocated to the intervention (n = 24) and control (n = 24) groups. Five participants dropped out during the 2-month follow-up, but they were in the intention-to-treat analysis.

INTERVENTIONS 

The intervention group undertook a 45-min conventional physiotherapy and a 30-min progressive bridging exercise. The control group received only the conventional exercise.

MAIN MEASURES

Peak vertical ground reaction force, time to peak force, peak foot pressure, and regional peak foot pressure during the extension phase of sit-to-stand, and sitting-to-standing item of the Motor Assessment Scale were assessed before training, after 4-week training, and 2-month follow-up.

RESULTS

The intervention group showed significantly (p < 0.001) less difference in peak vertical ground reaction force between feet during the extension phase of sit-to-stand than the control after 4-week training (mean ± standard deviation; intervention, 5.38 ± 3.99; control, 17.1 ± 10.3) and 2-month follow-up (intervention, 6.79 ± 3.84; control, 17.5 ± 9.89), and demonstrated significantly (p < 0.001) higher score in sit-to-stand than the control after training [mean (interquartile range); intervention, 5 (2-5); control, 2 (1-2)] and follow-up [intervention, 2 (2-5); control, 2 (1-2)]. Both groups demonstrated peak foot pressure on the medial and lateral heels, metatarsals, and hallux regions.

CONCLUSION 

Progressive bridging exercise improved symmetrical weight bearing during the extension phase of sit-to-stand, consequently enhanced sit-to-stand ability in individuals with stroke.

The Influence of Competitive Level on Stretch-Shortening Cycle Function in Young Female Gymnasts

This cross-sectional study investigated how stretch-shortening cycle (SSC) function and kinetic variables differed between young female gymnasts of varying competitive levels. Drop jump (DJ) force−time profiles were examined in 118 female gymnasts, sub-divided by competitive level (n = 21 recreational, n = 41 regional and n = 50 elite). DJ force−time data were analyzed to calculate performance and kinetic variables. Participants’ SSC function was categorized as poor, moderate, or good, depending on the presence of an impact peak and spring-like behavior. A high proportion of gymnasts across each group were categorized as having “good” or “moderate” SSC function (i.e., >94.8%), with a trend of increasingly better SSC function observed with competitive level. Significant differences in reactive strength index, contact time, time of landing peak force, relative propulsive peak force, impulse, and ratio of braking: propulsive impulse were found between the elite and recreational group (p < 0.05). While SSC function was generally good to moderate, elite gymnasts had a more desirable kinetic jump-landing strategy than recreational level gymnasts. Drop jump kinetic variables appear to distinguish between elite and recreational gymnasts but not between regional standard gymnasts. Practitioners should consider the kinetic profile of gymnasts when benchmarking and setting training objectives.

'Pandemic within a pandemic': a call to end police brutality

This correspondence points out the excessive use of police force in the Philippines since the outbreak of the pandemic. In a recent correspondence, the authors called for a cooperative, honest and considerate attitude toward the government. However, how can one trust the government if it relies heavily on draconian measures in 'war' against the pandemic?

The Astrin-SKAP complex reduces friction at the kinetochore-microtubule interface

The kinetochore links chromosomes to spindle microtubules to drive chromosome segregation at cell division. While we know nearly all mammalian kinetochore proteins, how these give rise to the strong yet dynamic microtubule attachments required for function remains poorly understood. Here, we focus on the Astrin-SKAP complex, which localizes to bioriented kinetochores and is essential for chromosome segregation but whose mechanical role is unclear. Live imaging reveals that SKAP depletion dampens the movement and decreases the coordination of metaphase sister kinetochores and increases the tension between them. Using laser ablation to isolate kinetochores bound to polymerizing versus depolymerizing microtubules, we show that without SKAP, kinetochores move slower on both polymerizing and depolymerizing microtubules and that more force is needed to rescue microtubules to polymerize. Thus, in contrast to the previously described kinetochore proteins that increase the grip on microtubules under force, Astrin-SKAP reduces the grip, increasing attachment dynamics and force responsiveness and reducing friction. Together, our findings suggest a model where the Astrin-SKAP complex effectively "lubricates" correct, bioriented attachments to help preserve them.

Epithelial Cell-Like Elasticity Modulates Actin-Dependent E-Cadherin Adhesion Organization

E-cadherin adhesions are essential for cell-to-cell cohesion and mechanical coupling between epithelial cells and reside in a microenvironment that comprises the adjoining epithelial cells. While E-cadherin has been shown to be a mechanosensor, it is unknown if E-cadherin adhesions can differentially sense stiffness within the range of that of epithelial cells. A survey of literature shows that epithelial cells' Young's moduli of elasticity lie predominantly in the sub-kPa to few-kPa range, with cancer cells often being softer than noncancerous ones. Here, we devised oriented E-cadherin-coated soft silicone substrates with sub-kPa or few-kPa elasticity but with similar viscous moduli and found that E-cadherin adhesions differentially organize depending on the magnitude of epithelial cell-like elasticity. Our results show that the actin cytoskeleton organizes E-cadherin adhesions in two ways─by supporting irregularly shaped adhesions at localized regions of high actin density and linear shaped adhesions at the end of linear actin bundles. Linearly shaped E-cadherin adhesions associated with radially oriented actin─but not irregularly shaped E-cadherin adhesions associated with circumferential actin foci─were much more numerous on 2.4 kPa E-cadherin substrates compared to 0.3 kPa E-cadherin substrates. However, the total amount of E-cadherin in both types of adhesions taken together was similar on the 0.3 and 2.4 kPa E-cadherin substrates across many cells. Our results show how the distribution of E-cadherin adhesions, supported by actin density and architecture, is modulated by epithelial cell-like elasticity and have significant implications for disease states like carcinomas characterized by altered epithelial cell elasticity.

Patellofemoral Joint Loading in Forward Lunge With Step Length and Height Variations

The objective was to assess how patellofemoral loads (joint force and stress) change while lunging with step length and step height variations. Sixteen participants performed a forward lunge using short and long steps at ground level and up to a 10-cm platform. Electromyography, ground reaction force, and 3D motion were captured, and patellofemoral loads were calculated as a function of knee angle. Repeated-measures 2-way analysis of variance (P < .05) was employed. Patellofemoral loads in the lead knee were greater with long step at the beginning of landing (10°-30° knee angle) and the end of pushoff (10°-40°) and greater with short step during the deep knee flexion portion of the lunge (50°-100°). Patellofemoral loads were greater at ground level than 10-cm platform during lunge descent (50°-100°) and lunge ascent (40°-70°). Patellofemoral loads generally increased as knee flexion increased and decreased as knee flexion decreased. To gradually increase patellofemoral loads, perform forward lunge in the following sequence: (1) minimal knee flexion (0°-30°), (2) moderate knee flexion (0°-60°), (3) long step and deep knee flexion (0°-100°) up to a 10-cm platform, and (4) long step and deep knee flexion (0°-100°) at ground level.

Effect of Strength vs. Plyometric Training upon Change of Direction Performance in Young Female Handball Players

The aim of the current study was to investigate the effect of six weeks of strength vs. plyometric training upon change of direction (COD) performance. A total of 21 young female handball players were randomly assigned to either a strength group: (n = 11, age: 17.5 ± 2.3 years, height: 1.69 ± 0.05 m, weight: 65.8 ± 5.9 kg) training bilateral, unilateral and later squats; or a plyometric training group (n = 10, age: 17.1 ± 2.4 years, height: 1.73 ± 0.07 m, weight: 67.1 ± 9.3 kg) training drop jumps, unilateral countermovement jumps and skate-jumps. Groups were assigned after being pair-matched based upon baseline COD performance. The training modalities were matched in training impulse. A force- (180°) and velocity-oriented (45°) COD of 20 m was used to measure changes in COD performance (10 m + COD + 10 m). Total time (s) to complete the COD test was defined as the performance variable. The level of significance was set at p < 0.05. The two-way ANOVA showed no group effect upon COD performance. A significant effect was only observed for the strength training group in the last 10 m and total 20 m of the force-oriented COD (F ≥ 5.51; p ≤ 0.04; η2 ≥ 0.36). Both groups improved performance in other strength- and power-related tests. It was concluded that only the strength training program was effective in developing force-oriented COD performance in the studied population, while the plyometric training program was not sufficient. Both training modalities are useful for improving performance in different strength and power tests in young female handball players.

Locomotor challenges of waterfall-climbing gobies during transitions between media

An amphidromous goby, Sicyopterus japonicus, migrates from the ocean to upstream regions of many streams and rivers in the Pacific coasts of Japan and Taiwan. Using its mouth and fused pelvic fins (pelvic sucker), this gobiid species exhibits a rock-climbing behavior and surmounts sizable waterfalls, which block the upstream movement of many of its competitors and predators. When gobies emerge from the water to commence their climbing behavior, the change in effective density (i.e., lack of buoyancy) that occurs in this transition substantially increases the force required for adhesion. Consequently, these fish must exert adhesive suction strong enough to support their body weight against gravity during climbing on the rock surface. Suction performance for adhesion and modulatory capacity of S. japonicus were evaluated with two different sets of experimental conditions: climbing on the vertical surface with no water flow, versus climbing on a 60o-inclined surface with 2 L/min flow. Individuals of S. japonicus showed 50.7% greater mean safety factor (suction force for adhesion/gravitational force) and 56.6% shorter time to reach maximum pressure differential during climbing on the 60o-inclined surface with water rushing over their bodies than during climbing on the vertical surface with no water flow. These results indicate that when climbing with drag force from flowing water, greater functional demands are imposed and therefore, S. japonicus is required to increase neuromuscular stimulation of the pelvic muscles to elevate suction performance. In addition, S. japonicus individuals at different ontogenetic stages modulate their climbing behaviors and strategies to accommodate changing functional demands as they make transitions between different inclines, as well as media, while ascending waterfalls.

The Power of Touch: Type 4 Pili, the von Willebrand A Domain, and Surface Sensing by Pseudomonas aeruginosa

Most microbes in the biosphere are attached to surfaces, where they experience mechanical forces due to hydrodynamic flow and cell-to-substratum interactions. These forces likely serve as mechanical cues that influence bacterial physiology and eventually drive environmental adaptation and fitness. Mechanosensors are cellular components capable of sensing a mechanical input and serve as part of a larger system for sensing and transducing mechanical signals. Two cellular components in bacteria that have emerged as candidate mechanosensors are the type IV pili (TFP) and the flagellum. Current models posit that bacteria transmit and convert TFP- and/or flagellum-dependent mechanical force inputs into biochemical signals, including cAMP and c-di-GMP, to drive surface adaptation. Here, we discuss the impact of force-induced changes on the structure and function of two eukaryotic proteins, titin and the human von Willebrand factor (vWF), and these proteins’ relevance to bacteria. Given the wealth of understanding about these eukaryotic mechanosensors, we can use them as a framework to understand the effect of force on Pseudomonas aeruginosa during the early stages of biofilm formation, with a particular emphasis on TFP and the documented surface-sensing mechanosensors PilY1 and FimH. We also discuss the importance of disulfide bonds in mediating force-induced conformational changes, which may modulate mechanosensing and downstream biochemical signaling. We conclude by sharing our perspective on the state of the field and what we deem exciting frontiers in studying bacterial mechanosensing to better understand the mechanisms whereby bacteria transition from a planktonic to a biofilm lifestyle.

Muscle hypertrophy and strength gains after resistance training with different volume-matched loads: a systematic review and meta-analysis

The purpose of this paper was to conduct a systematic review and meta-analysis of studies that compared muscle hypertrophy and strength gains between resistance training protocols employing very low (VLL < 30% of 1-repetition maximum (RM) or >35RM), low (LL30%-59% of 1RM, or 16-35RM), moderate (ML60%-79% of 1RM, or 8-15RM), and high (HL ≥ 80% of 1RM, or ≤7RM) loads with matched volume loads (sets × repetitions × weight). A pooled analysis of the standardized mean difference for 1RM strength outcomes across the studies showed a benefit favoring HL vs. LL and vs. ML and favoring ML vs. LL. The LL and VLL results showed little difference. A pooled analysis of the standardized mean difference for hypertrophy outcomes across all studies showed no differences between training loads. Our findings indicate that when the volume load is equal between conditions, the highest loads induce superior dynamic strength gains. Alternatively, hypertrophic adaptations were similar irrespective of the load magnitude. Novelty: Training with higher loads elicits greater gains in 1RM muscle strength when compared to lower loads, even when the volume load is equal between conditions. Muscle hypertrophy is similar irrespective of the magnitude of the load, even when the volume load is equal between conditions.

Electromyostimulation Application on Peroneus Longus Muscle Improves Balance and Strength in American Football Players

PURPOSE

The aim of this study was to evaluate the effect of 5 weeks of electromyostimulation (EMS) of the peroneus longus muscle on balance and muscle strength in American Football (AmF) players.

METHODS

Thirty-two healthy male athletes (4 American Football team training sessions per week, college level) were randomly divided into the EMS and control groups. The EMS applications were conducted on the dominant peroneus longus muscle 3 times per week for 5 weeks, with each application lasting 25 minutes. Before and after the interventions, the strength of ankle dorsiflexion-plantar flexion and foot eversion-inversion was measured with isometric dynamometer and anterior-posterior sway, mediolateral sway, perimeter, and ellipse area were measured with the Technobody Balance System in unilateral stance positions, while eyes were open.

RESULTS

Changes between initial and final tests for dorsiflexion and eversion strength, and mediolateral sway for dynamic balance in the groups were significantly different (P = .039, P = .027, P = .030, respectively).

CONCLUSION

The EMS application had positive effects on muscle strength and dynamic balance of AmF players. The EMS can be used to improve isometric strength and dynamic balance in AmF players.

Engagement of the contralateral limb can enhance the facilitation of motor output by loud acoustic stimuli

When intense sound is presented during light muscle contraction, inhibition of the corticomotoneuronal pathway is observed. During action preparation, this effect is reversed, with sound resulting in excitation of the corticomotoneuronal pathway. We investigated how combined maintenance of a muscle contraction during preparation for a ballistic action impacts the magnitude of the facilitation of motor output by a loud acoustic stimulus (LAS) - a phenomenon known as the StartReact effect. Participants executed ballistic wrist flexion movements and a LAS was presented simultaneously with the imperative signal in a subset of trials. We examined whether the force level or muscle used to maintain a contraction during preparation for the ballistic response impacted reaction time and/or the force of movements triggered by the LAS. These contractions were sustained either ipsilaterally or contralaterally to the ballistic response. The magnitude of facilitation by the LAS was greatest when low force flexion contractions were maintained in the limb contralateral to the ballistic response during preparation. There was little change in facilitation when contractions recruited the contralateral extensor muscle, or when they were sustained in the same limb that executed the ballistic response. We conclude that a larger network of neurons which may be engaged by a contralateral sustained contraction prior to initiation may be recruited by the LAS, further contributing to the motor output of the response. These findings may be particularly applicable in stroke rehabilitation where engagement of the contralesional side may increase the benefits of a LAS to the functional recovery of movement.

Cellular and molecular pathways controlling muscle size in response to exercise

From the discovery of ATP and motor proteins to synaptic neurotransmitters and growth factor control of cell differentiation, skeletal muscle has provided an extreme model system in which to understand aspects of tissue function. Muscle is one of the few tissues that can undergo both increase and decrease in size during everyday life. Muscle size depends on its contractile activity, but the precise cellular and molecular pathway(s) by which the activity stimulus influences muscle size and strength remain unclear. Four correlates of muscle contraction could, in theory, regulate muscle growth: nerve-derived signals, cytoplasmic calcium dynamics, the rate of ATP consumption and physical force. Here, we summarise the evidence for and against each stimulus and what is known or remains unclear concerning their molecular signal transduction pathways and cellular effects. Skeletal muscle can grow in three ways, by generation of new syncytial fibres, addition of nuclei from muscle stem cells to existing fibres or increase in cytoplasmic volume/nucleus. Evidence suggests the latter two processes contribute to exercise-induced growth. Fibre growth requires increase in sarcolemmal surface area and cytoplasmic volume at different rates. It has long been known that high-force exercise is a particularly effective growth stimulus, but how this stimulus is sensed and drives coordinated growth that is appropriately scaled across organelles remains a mystery.

Influence of Strength Programs on the Injury Rate and Team Performance of a Professional Basketball Team: A Six-Season Follow-Up Study

This study aims to determine possible associations between strength parameters, injury rates, and performance outcomes over six seasons in professional basketball settings. Thirty-six male professional basketball players [mean ± standard deviation (SD): age, 30.5 ± 4.7 years; height, 199.5 ± 9.5 cm; body mass, 97.9 ± 12.9 kg; BMI 24.6 ± 2.5 kg/m2] participated in this retrospective observational study, conducted from the 2008-09 to the 2013-14 season. According to their epidemiological records, each player followed an individual plan designed within different strength training programs: Functional (n = 16), Eccentric (n = 8), or Resistance (n = 12). Seven hundred and fourteen valid records were obtained from 170 individual strength tests during 31 sessions. Tests performed were leg press, squat, and jerk. Parameters recorded were force, power, velocity, peak velocity, and time to peak velocity for strength; time loss injury and muscle injury for injury rate; and games won, games lost, and championships for performance outcomes. All the strength variables and injuries are independent of the strength programs (p < 0.01). The correlation analysis showed very significant relationships between muscular injuries and time to peak velocity (r = 0.94; p < 0.01), significant relationships between force and games lost (r = 0.85; p < 0.05), and muscular injuries with games lost (r = -0.81; p < 0.05) per season. Mean values per season described a possible association of force, time to peak velocity, and muscular injuries with performance outcomes (R 2 = 0.96; p < 0.05). In this specific context, strength variables and injury rate data show no association with a single type of strength training program in this cohort of high-performance basketball players.

Influence of Strength Level on Performance Enhancement Using Resistance Priming

ABSTRACT

Nishioka, T and Okada, J. Influence of strength level on performance enhancement using resistance priming. J Strength Cond Res 36(1): 37-46, 2022-The current study aimed to investigate (a) whether resistance priming was effective in enhancing jump performance for both stronger and weaker individuals and (b) how resistance priming influences the lower-body force-velocity profile. A total of 20 resistance-trained men performed priming and control conditions 72-144 hours apart in a randomized and counterbalanced order. Jump performances (0 and 40% 1 repetition maximum [1RM] squat jump, 0 and 40% 1RM countermovement jump [CMJ] and drop jump) were assessed before and 24 hours after the priming session, and before and 24 hours after rest (control). Priming session-induced percentage change in 0% 1RM CMJ height was positively correlated with the individual's relative half squat 1RM (r = 0.612, p ≤ 0.05). Using the median split method, subjects were divided into stronger (relative half squat 1RM = 1.93-2.67 kg·kg-1) and weaker (relative half squat 1RM = 1.37-1.92 kg·kg-1) groups and subsequently analyzed. The stronger group showed specific improvement in 0% 1RM CMJ performance 24 hours after the priming session (p ≤ 0.05), whereas the weaker group showed no improvement in any of their jump performances. Moreover, the priming session enhanced the theoretical maximum velocity (p ≤ 0.05), but not the theoretical maximum force during CMJ in the stronger group; whereas none of the force-velocity profile variables were enhanced in the weaker group. These results suggest that stronger individuals are more likely to experience performance enhancement using resistance priming, which may be movement- and velocity-specific.

Evaluation of within- and between- session 1 reliability of the TekscanTM Hoof System with a glue-on shoe

A current trend in equine research is technology development to minimize the subjective nature of gait analysis. One such technology is the Tekscan Hoof System, which records force and area loaded by the hooves during motion. The objective of this study was to determine the test-retest reliability of the Tekscan Hoof System between two sessions, and the recordings within those sessions. Four mature Standardbred geldings wore Tekscan Hoof System sensors on both front hooves, secured by glue-on shoes (SoundHorse Technologies). Horses were exercised in AM and PM sessions. In each session, horses walked and trotted for 3 recordings of at least 10 steps. Statistical analysis was performed in SAS 9.4 with fixed effects of gait, horse, leg, and recording nested within session (significance at P ≤ 0.05). Intraclass Correlation Coefficients (ICC; 3,k) and confidence intervals between AM and PM sessions and recordings were calculated with SPSS. Average force and area were higher in AM sessions than PM sessions (P < 0.0001). Between AM and PM sessions, ICC for the walk had good reliability (0.959, 95% CI = 0.797 - 0.992) and excellent reliability at the trot (0.982, 95% CI = 0.911-0.996). Within the AM and PM sessions, reliability was excellent at both the walk and trot (ICCs > 0.962). The Tekscan Hoof System has been found to have excellent reliability within sessions. Caution should be taken when comparing between sessions, as the system is found to have lower force and area output during later sessions due to potential sensor damage.

Dynamics of the Actin Cytoskeleton at Adhesion Complexes

The shape of cells is altered to allow cells to adapt to their changing environments, including responding to internally generated and externally applied force. Force is sensed by cell surface adhesion proteins that are enriched in sites where cells bind to the extracellular matrix (focal adhesions) and neighboring cells (cell-cell or adherens junctions). Receptors at these adhesion sites stimulate intracellular signal transduction cascades that culminate in dramatic changes in the actin cytoskeleton. New actin filaments form, and/or new and existing filaments can be cleaved, branched, or bundled. Here, we discuss the actin cytoskeleton and its functions. We will examine the current understanding for how the actin cytoskeleton is tethered to adhesion sites. Finally, we will highlight recent studies describing how the actin cytoskeleton at these adhesion sites is remodeled in response to force.

Deep-Learning Based Estimation of Dielectrophoretic Force

The ability to accurately quantify dielectrophoretic (DEP) force is critical in the development of high-efficiency microfluidic systems. This is the first reported work that combines a textile electrode-based DEP sensing system with deep learning in order to estimate the DEP forces invoked on microparticles. We demonstrate how our deep learning model can process micrographs of pearl chains of polystyrene (PS) microbeads to estimate the DEP forces experienced. Numerous images obtained from our experiments at varying input voltages were preprocessed and used to train three deep convolutional neural networks, namely AlexNet, MobileNetV2, and VGG19. The performances of all the models was tested for their validation accuracies. Models were also tested with adversarial images to evaluate performance in terms of classification accuracy and resilience as a result of noise, image blur, and contrast changes. The results indicated that our method is robust under unfavorable real-world settings, demonstrating that it can be used for the direct estimation of dielectrophoretic force in point-of-care settings.

In vivo assessment of the passive stretching response of the bi-compartmental human semitendinosus muscle using shear wave elastography

The semitendinosus muscle contains distinct proximal and distal compartments arranged anatomically in-series but separated by a tendinous inscription, with each compartment innervated by separate nerve branches. Although extensively investigated in other mammals, compartment-specific mechanical properties within the human semitendinosus have scarcely been assessed in vivo. Experimental data obtained during muscle-tendon unit stretching (e.g., slack angle) can also be used to validate and/or improve musculoskeletal model estimates of semitendinosus muscle force. The purpose of this study was to investigate the passive stretching response of proximal and distal humans semitendinosus compartments to distal joint extension. Using two-dimensional shear wave elastography, we bilaterally obtained shear moduli of both semitendinosus compartments from 14 prone-positioned individuals at ten knee flexion angles (from 90° to 0° [full extension] at 10° intervals). Passive muscle mechanical characteristics (slack angle, slack shear modulus, and the slope of the increase in shear modulus) were determined for each semitendinosus compartment by fitting a piecewise exponential model to the shear modulus-joint angle curves. We found no differences between compartments or legs for slack angle, slack shear modulus, or the slope of the increase in shear modulus. We also found the experimentally determined slack angle occurred at ~15-80° higher knee flexion angles compared to estimates from two commonly used musculoskeletal models, depending on participant and model used. Overall, these findings demonstrate that passive shear modulus-joint angle curves do not differ between proximal and distal human semitendinosus compartments, and provide experimental data to improve semitendinosus force estimates derived from musculoskeletal models.

The Bilateral Deficit Phenomenon in Elbow Flexion: Explanations for Its Inconsistent Occurrence and Detection

The underlying mechanism(s) of the Bilateral Deficit (BLD) phenomenon is without consensus. Methodological inconsistencies across prior works may be an important source of equivocal results and interpretations. Based on repeatability problems with the BLD measure and maximal force definition, the presence or absence of the BLD phenomenon is altered, shifting conclusions of its mechanistic cause. Our purpose in this study was to examine methodological inconsistencies in applying the BLD measure to establish optimal methods for evaluating the underlying mechanism. Eleven healthy participants engaged in one familiarity and five test sessions, completing bilateral and unilateral elbow maximal voluntary isometric contractions. We defined maximal force by averaged and absolute peak and plateau values. BLD was evident if the bilateral index (BI), the ratio of the bilateral over summed unilateral forces, was statistically different from zero. We addressed interclass correlations (ICC), Chronbach's α, standard error of the mean, and minimal detectable change between and within sessions for all force measures and BI. We evaluated all combinations of sessions (i.e., 1-2, 3-5, 5-6) and maximal forces to establish the optimal number of sessions to achieve reliability. BLD was present for test sessions, but not for familiarization. All measures of maximal force were highly reliable between and within sessions (ICC(2,1) ≥ .895). BI was only considered significantly reliable in sessions 3-5 (p < .027), defined by absolute and average plateau forces, but reliability was still quantifiably poor (absolute: ICC(2,1) = .392; average: ICC(2,1) = .375). These results demonstrate that high force reliability within and between sessions does not translate to stable and reliable BI, potentially exposing the lack of any defined BLD mechanism.