Modulation of the Magnetic Hyperthermia Response Using Different Superparamagnetic Iron Oxide Nanoparticle Morphologies

The use of magnetic nanoparticles in hyperthermia, that is, heating induced by alternating magnetic fields, is gaining interest as a non-invasive, free of side effects technique that can be considered as a co-adjuvant of other cancer treatments. Having sufficient control on the field characteristics, within admissible limits, the focus is presently on the magnetic material. In the present contribution, no attempt has been made of using other composition than superparamagnetic iron oxide nanoparticles (SPION), or of applying surface functionalization, which opens a wider range of choices. We have used a hydrothermal synthesis route that allows preparing SPION nanoparticles in the 40 nm size range, with spherical, cuboidal or rod-like shapes, by minor changes in the synthesis steps. The three kinds of particles (an attempt to produce star-shaped colloids yielded hematite) were demonstrated to have the magnetite (or maghemite) crystallinity. Magnetization cycles showed virtually no hysteresis and demonstrated the superparamagnetic nature of the particles, cuboidal ones displaying saturation magnetization comparable to bulk magnetite, followed by rods and spheres. The three types were used as hyperthermia agents using magnetic fields of 20 kA/m amplitude and frequency in the range 136–205 kHz. All samples demonstrated to be able to raise the solution temperature from room values to 45 °C in a mere 60 s. Not all of them performed the same way, though. Cuboidal magnetic nanoparticles (MNPs) displayed the maximum heating power (SAR or specific absorption rate), ranging in fact among the highest reported with these geometries and raw magnetite composition.

Plasmonic Imaging of Oxidation and Reduction of Single Gold Nanoparticles and Their Surface Structural Dynamics

Gold nanoparticles (AuNPs) have been widely used in catalytic electrochemistry. Heterogeneity in size, shape, and surface sites leads to variable, particle-specific catalytic activities. Conventional electrochemical methods can only obtain the collective responses from all the catalytic nanoparticles on the electrode surface; the heterogeneity of particle performance will be averaged. Alternatively, plasmonic electrochemical imaging (PECi) is capable of imaging the electrochemical activity at individual nanoparticles. In this work, PECi was used to image the oxidation and reduction of the gold surface at individual AuNPs, and their associated structural alterations were successfully measured. We have studied the electrochemical responses from gold nanocubes, gold nanorods, and gold nanowires with PECi and observed different surface redox activities. We have also demonstrated the capability of monitoring the surface dynamics at individual AuNPs utilizing characteristic PECi derived cyclic voltammograms (CVs).

Plasmonic Anticounterfeit Tags with High Encoding Capacity Rapidly Authenticated with Deep Machine Learning

Counterfeit goods create significant economic losses and product failures in many industries. Here, we report a covert anticounterfeit platform where plasmonic nanoparticles (NPs) create physically unclonable functions (PUFs) with high encoding capacity. By allowing anisotropic Au NPs of different sizes to deposit randomly, a diversity of surfaces can be facilely tagged with NP deposits that serve as PUFs and are analyzed using optical microscopy. High encoding capacity is engineered into the tags by the sizes of the Au NPs, which provide a range of color responses, while their anisotropy provides sensitivity to light polarization. An estimated encoding capacity of 270ⁿ is achieved, which is one of the highest reported to date. Authentication of the tags with deep machine learning allows for high accuracy and rapid matching of a tag to a specific product. Moreover, the tags contain descriptive metadata that is leveraged to match a tag to a specific lot number (i.e., a collection of tags created in the same manner from the same formulation of anisotropic Au NPs). Overall, integration of designer plasmonic NPs with deep machine learning methods can create a rapidly authenticated anticounterfeit platform with high encoding capacity.

Synergistic Effect of Simultaneous Doping of Ceria Nanorods with Cu and Cr on CO Oxidation and NO Reduction

Ceria particles play a key role in catalytic applications such as automotive three-way catalytic systems in which toxic CO and NO are oxidized and reduced to safe CO2 and N2 , respectively. In this work, we explore the incorporation of Cu and Cr metals as dopants in the crystal structure of ceria nanorods prepared by a single-step hydrothermal synthesis. XRD, Raman and XPS confirm the incorporation of Cu and Cr in the ceria crystal lattices, offering ceria nanorods with a higher concentration of oxygen vacancies. XPS also confirms the presence of Cr and Cu surface species. H2 -TPR and XPS analysis show that the simultaneous Cu and Cr co-doping results in a catalyst with a higher surface Cu concentration and a much-enhanced surface reducibility, in comparison with either undoped or singly doped (Cu or Cr) ceria nanorods. While single Cu doping enhances catalytic CO oxidation and Cr doping improves catalytic NO reduction, co-doping with both Cu and Cr enhances the benefits of both dopants in a synergistic manner employing roughly a quarter of dopant weight.

Self-Organized Growth of 111-Oriented (VNbTaMoW)N Nanorods on MgO(001)

Refractory high-entropy alloy nitride, (VNbTaMoW)N, layers are grown on single-crystalline MgO(001) via ultrahigh vacuum direct current magnetron sputtering of a VNbTaMoW target in Kr/N₂ gas mixtures at 1073 K. X-ray diffraction, scanning and transmission electron microscopy, and energy dispersive X-ray spectroscopy characterizations revealed the formation of B1-structured, 111-textured (V_0.21Nb_0.18Ta_0.19Mo_0.21W_0.21)N_1.05 with lattice parameter a = 0.4249 nm. The alloy nitride film exhibits dense columnar microstructure near the substrate-film interface with coherent 001 grain growth limited to a few tens of nanometers, followed by an outgrowth of quasi one-dimensional nanorods with 3-fold symmetric facets. We attribute the self-organized growth of rather unusual 111-textured nanorods on isostructural MgO(001) to kinetic limitations of the sputter-deposition process exacerbated by the sluggish diffusion of the multicomponent adspecies and the preferential growth of {111} crystals.

Broadband dielectric spectroscopic detection of volatile organic compounds with ZnO nanorod gas sensors

Metal-oxide (MO) semiconductor gas sensors based on chemical resistivity necessarily involve making electrical contacts to the sensing materials. These contacts are imperfect and introduce errors into the measurements. In this paper, we demonstrate the feasibility of using contactless broadband dielectric spectroscopy (BDS)-based metrology in gas monitoring that avoids distortions in the reported resistivity values due to probe use, and parasitic errors (i.e. tool-measurand interactions). Specifically, we show how radio frequency propagation characteristics can be applied to study discrete processes on MO sensing material, such as zinc oxide (i.e. ZnO) surfaces, when exposed to a redox-active gas. Specifically, we have used BDS to investigate the initial oxidization of ZnO gas sensing material in air at temperatures below 200 °C, and to show that the technique affords new mechanistic insights that are inaccessible with the traditional resistance-based measurements.

Morphological Effects in SnO2 Chemiresistors for Ethanol Detection: A Review in Terms of Central Performances and Outliers

SnO₂ is one of the most studied materials in gas sensing and is often used as a benchmark for other metal oxide-based gas sensors. To optimize its structural and functional features, the fine tuning of the morphology in nanoparticles, nanowires, nanosheets and their eventual hierarchical organization has become an active field of research. In this paper, the different SnO₂ morphologies reported in literature in the last five years are systematically compared in terms of response amplitude through a statistical approach. To have a dataset as homogeneous as possible, which is necessary for a reliable comparison, the analysis is carried out on sensors based on pure SnO₂, focusing on ethanol detection in a dry air background as case study. Concerning the central performances of each morphology, results indicate that none clearly outperform the others, while a few individual materials emerge as remarkable outliers with respect to the whole dataset. The observed central performances and outliers may represent a suitable reference for future research activities in the field.

Synthesis of manganese doped β-FeOOH and MnFe2O4 nanorods for enhanced drug delivery and hyperthermia application

Preparation of manganese ferrite (MnFe2O4) nanorods by the reduction of akaganeite seeds in the presence of oleylamine is reported. The Mn-doped β-FeOOH akaganeite seeds have been processed by the hydrolysis of metal-chloride salts in the presence of polyethylenimine (PEI) surfactant. The hydrophobic oleylamine capped nanorods are made hydrophilic using trisodium citrate as a phase transferring agent. The nanorods form with an aspect ratio of 5.47 and possess a high magnetisation value of 69 emu/g at an applied magnetic field of 1.5 T. The colloidal water dispersion of nanorods exhibits superior heating efficiency by the application of alternating magnetic field (AMF). A specific absorption rate value of 798 W/g is achieved at an applied AMF of field strength 500 Oe and frequency 316 kHz. Further, the citrate functionalised nanorods are capable of attaching with doxorubicin (DOX) electrostatically with a loading efficiency of 97% and the drug release is pH responsive. The DOX loaded nanorods show a promising effect on the apoptosis of MCF-7 as experimented in vitro.

Hydrous icaritin nanorods with excellent stability improves the in vitro and in vivo activity against breast cancer

Due to their various biological activities that are beneficial to human health and antitumor effect, flavonoid compounds have attracted much attention in recent years. Hydrous icaritin (HICT) was such a flavonoid that can inhibit the growth of breast cancer and cancer stem cells. In order to overcome the insolubility problem, HICT was fabricated into nanorods (NRs) through anti-solvent precipitation in this paper using D-α tocopherol acid polyethylene glycol succinate and sodium oleate as a co-stabilizer meanwhile using the mixture of ethanol and acetone (1:2, v/v) as the organic solvent. The obtained HICT NRs showed an average particle size 222.0 nm with a small polydispersity index value of 0.124 and a high zeta potential of – 49.5 mV. HICT NRs could maintain similar particle size in various physiological medium and could be directly lyophilized without the addition of any cytoprotectants and then reconstituted into a colloidal system of similar size. The resultant HICT NRs had a high drug loading content of 55.6% and released HICT in a steady and constant pattern. MTT assay indicated NRs enhanced HICT’s antitumor activity to ninefold against MCF-7 breast carcinoma cells. In vivo studies demonstrated oral administration free HICT had almost no tumor inhibitory effect while HICT NRs showed a tumor inhibition rate of 47.8%. When intravenously injected, HICT NRs displayed similar therapeutic efficacy to paclitaxel injections (70.4% vs. 74.5%, TIR). This may be partly due to the high accumulation of the injected HICT NRs in tumor ranking only second to that in the liver but much higher than in other organs. These results demonstrated that HICT NRs could be a promising antitumor agent for the treatment of breast cancer in clinic.

A Hierarchical 3D TiO2 /Ni Nanostructure as an Efficient Hole-Extraction and Protection Layer for GaAs Photoanodes

Photoelectrochemical (PEC) water splitting is a promising clean route to hydrogen fuel. The best-performing materials (III/V semiconductors) require surface passivation, as they are liable to corrosion, and a surface co-catalyst to facilitate water splitting. At present, optimal design combining photoelectrodes with oxygen evolution catalysts remains a significant materials challenge. Here, we demonstrate that nickel-coated amorphous three-dimensional (3D) TiO₂ core-shell nanorods on a TiO₂ thin film function as an efficient hole-extraction layer and serve as a protection layer for the GaAs photoanode. Transient-absorption spectroscopy (TAS) demonstrated the role of nickel-coated (3D) TiO₂ core-shell nanorods in prolonging photogenerated charge lifetimes in GaAs, resulting in a higher catalytic activity. This strategy may open the potential of utilizing this low-cost (3D) nanostructured catalyst for decorating narrow-band-gap semiconductor photoanodes for PEC water splitting devices.

Metal Halide Perovskite Nanorods: Shape Matters

Quasi-1D metal halide perovskite nanorods (NRs) are emerging as a type of materials with remarkable optical and electronic properties. Research into this field is rapidly expanding and growing in the past several years, with significant advances in both mechanistic studies of their growth and widespread possible applications. Here, the recent advances in 1D metal halide perovskite nanocrystals (NCs) are reviewed, with a particular emphasis on NRs. At first, the crystal structures of perovskites are elaborated, which is followed by a review of the major synthetic approaches toward perovskite NRs, such as wet-chemical synthesis, substrate-assisted growth, and anion exchange reactions, and discussion of the growth mechanisms associated with each synthetic method. Then, thermal and aqueous stability and the linear polarized luminescence of perovskite NRs are considered, followed by highlighting their applications in solar cells, light-emitting diodes, photodetectors/phototransistors, and lasers. Finally, challenges and future opportunities in this rapidly developing research area are summarized.

A review on nanotoxicity and nanogenotoxicity of different shapes of nanomaterials

Nanomaterials (NMs) generally display fascinating physical and chemical properties that are not always present in bulk materials; therefore, any modification to their size, shape, or coating tends to cause significant changes in their chemical/physical and biological characteristics. The dramatic increase in efforts to use NMs renders the risk assessment of their toxicity highly crucial due to the possible health perils of this relatively uncharted territory. The different sizes and shapes of the nanoparticles are known to have an impact on organisms and an important place in clinical applications. The shape of nanoparticles, namely, whether they are rods, wires, or spheres, is a particularly critical parameter to affect cell uptake and site-specific drug delivery, representing a significant factor in determining the potency and magnitude of the effect. This review, therefore, intends to offer a picture of research into the toxicity of different shapes (nanorods, nanowires, and nanospheres) of NMs to in vitro and in vivo models, presenting an in-depth analysis of health risks associated with exposure to such nanostructures and benefits achieved by using certain model organisms in genotoxicity testing. Nanotoxicity experiments use various models and tests, such as cell cultures, cores, shells, and coating materials. This review article also attempts to raise awareness about practical applications of NMs in different shapes in biology, to evaluate their potential genotoxicity, and to suggest approaches to explain underlying mechanisms of their toxicity and genotoxicity depending on nanoparticle shape.

Binder-Free Electrode Based on ZnO Nanorods Directly Grown on Aluminum Substrate for High Performance Supercapacitors

Herein, for the first time, the growth of ZnO nanorods directly on aluminum (Al) substrate via a low temperature (80 °C) wet chemical method, and used as binder-free electrode for supercapacitors were reported. XRD pattern and HRTEM images showed that high crystalline nanorods grown on Al substrate with c-axis orientation. Morphological studies revealed that the nanorods possessed well defined hexagon phase with length and diameter of ~2 µm and 100–180 nm, respectively. Raman spectrum of ZnO nanorods showed that the characteristic E_2H mode corresponds to the vibration associated with the oxygen atoms of ZnO. The optical properties of ZnO nanorods studied using Room-temperature PL spectra revealed a near-band-edge (NBE) peak at ~388 nm emission and deep level (DLE) at ~507 nm. Electrochemical measurements showed that ZnO nanorods on Al substrate exhibited remarkably enhanced performance as electrode for supercapacitors with a value of specific capacitance of 394 F g⁻¹ measured with scan rate of 20 mV s⁻¹. This unique nanorods structures also exhibited excellent stability of >98% capacitance retention for 1000 cycles that were measured at 1A g⁻¹. The presented easy and cost-effective method might open up the possibility for the mass production of binder-free electrodes for efficient electrochemical energy storage devices.

Viscoelastic Properties of ECM-Rich Embryonic Microenvironments

The material properties of tissues and their mechanical state is an important factor in development, disease, regenerative medicine and tissue engineering. Here we describe a microrheological measurement technique utilizing aggregates of microinjected ferromagnetic nickel particles to probe the viscoelastic properties of embryonic tissues. Quail embryos were cultured in a plastic incubator chamber located at the center of two pairs of crossed electromagnets. We found a pronounced viscoelastic behavior within the ECM-rich region separating the mesoderm and endoderm in Hamburger Hamilton stage 10 quail embryos, consistent with a Zener (standard generalized solid) model. The viscoelastic response is about 45% of the total response, with a characteristic relaxation time of 1.3 s.

Four-Dimensional Deoxyribonucleic Acid-Gold Nanoparticle Assemblies

Organization of gold nanoobjects by oligonucleotides has resulted in many three-dimensional colloidal assemblies with diverse size, shape, and complexity; nonetheless, autonomous and temporal control during formation remains challenging. In contrast, living systems temporally and spatially self-regulate formation of functional structures by internally orchestrating assembly and disassembly kinetics of dissipative biomacromolecular networks. We present a novel approach for fabricating four-dimensional gold nanostructures by adding an additional dimension: time. The dissipative character of our system is achieved using exonuclease III digestion of deoxyribonucleic acid (DNA) fuel as an energy-dissipating pathway. Temporal control over amorphous clusters composed of spherical gold nanoparticles (AuNPs) and well-defined core-satellite structures from gold nanorods (AuNRs) and AuNPs is demonstrated. Furthermore, the high specificity of DNA hybridization allowed us to demonstrate selective activation of the evolution of multiple architectures of higher complexity in a single mixture containing small and larger spherical AuNPs and AuNRs.

A Flow-Through Membraneless Microfluidic Zinc-Air Cell

In this work, the proof of concept of a functional membraneless microfluidic Zn-air cell (μZAC) that operates with a flow-through arrangement is presented for the first time, where the activity and durability can be modulated by electrodepositing Zn on porous carbon electrodes. For this purpose, Zn electrodes were obtained using chronoamperometry and varying the electrodeposition times (20, 40, and 60 min), resulting in porous electrodes with Zn thicknesses of 3.3 ± 0.3, 11.6 ± 2.4, and 34.8 ± 5.1 μm, respectively. Pt/C was initially used as the cathode to analyze variables, such as KOH concentration and flow rate, and then, two manganese-based materials were evaluated (α-MnO₂ and MnMn₂O₄ spinel, labeled as Mn₃O₄) to determine the effect of inexpensive materials on the cell performance. According to the transmission electron microscopy (TEM) results, α-MnO₂ has a nanorod-like shape with a diameter of 11 ± 1.5 nm, while Mn₃O₄ presented a hemispherical shape with an average particle size of 22 ± 1.8 nm. The use of α-MnO₂ and Mn₃O₄ cathodic materials resulted in cell voltages of 1.39 and 1.35 V and maximum power densities of 308 and 317 mW cm^-2, respectively. The activities of both materials were analyzed through density of state calculations; all manganese species in the α-material MnO₂ presented an equivalent density of states with a reduced orbital occupation to the left of the Fermi energy, which allowed for better global performance above Mn₃O₄/C and Pt/C.

Optical Rotation and Thermometry of Laser Tweezed Silicon Nanorods

Optical rotation of laser tweezed nanoparticles offers a convenient means for optical to mechanical force transduction and sensing at the nanoscale. Plasmonic nanoparticles are the benchmark system for such studies, but their rapid rotation comes at the price of high photoinduced heating due to Ohmic losses. We show that Mie resonant silicon nanorods with characteristic dimensions of ∼220 × 120 nm² can be optically trapped and rotated at frequencies up to 2 kHz in water using circularly polarized laser light. The temperature excess due to heating from the trapping laser was estimated by phonon Raman scattering and particle rotation analysis. We find that the silicon nanorods exhibit slightly improved thermal characteristics compared to Au nanorods with similar rotation performance and optical resonance anisotropy. Altogether, the results indicate that silicon nanoparticles have the potential to become the system of choice for a wide range of optomechanical applications at the nanoscale.

Isolation of Cancer-Derived Exosomes Using a Variety of Magnetic Nanostructures: From Fe3O4 Nanoparticles to Ni Nanowires

Isolating and analyzing tumor-derived exosomes (TEX) can provide important information about the state of a tumor, facilitating early diagnosis and prognosis. Since current isolation methods are mostly laborious and expensive, we propose herein a fast and cost-effective method based on a magnetic nanoplatform to isolate TEX. In this work, we have tested our method using three magnetic nanostructures: (i) Ni magnetic nanowires (MNWs) (1500 × 40 nm), (ii) Fe3O4 nanorods (NRs) (41 × 7 nm), and (iii) Fe3O4 cube-octahedral magnetosomes (MGs) (45 nm) obtained from magnetotactic bacteria. The magnetic response of these nanostructures has been characterized, and we have followed their internalization inside canine osteosarcoma OSCA-8 cells. An overall depiction has been obtained using a combination of Fluorescence and Scanning Electron Microscopies. In addition, Transmission Electron Microscopy images have shown that the nanostructures, with different signs of degradation, ended up being incorporated in endosomal compartments inside the cells. Small intra-endosomal vesicles that could be precursors for TEX have also been identified. Finally, TEX have been isolated using our magnetic isolation method and analyzed with a Nanoparticle tracking analyzer (NanoSight). We observed that the amount and purity of TEX isolated magnetically with MNWs was higher than with NRs and MGs, and they were close to the results obtained using conventional non-magnetic isolation methods.

Enhanced Thermoelectric Performance of Novel Reaction Condition-Induced Bi2S3-Bi Nanocomposites

This is the first report on the enhanced thermoelectric (TE) properties of novel reaction-temperature (T_Re) and duration-induced Bi₂S₃-Bi nanocomposites synthesized using a facile one-step polyol method. They are well characterized as nanorod composites of orthorhombic Bi₂S₃ and rhombohedral Bi phases in which the latter coats the former forming Bi₂S₃-Bi core-shell-like structures along with independent Bi nanoparticles. A very significant observation is the systematic reduction in electrical resistivity ρ with a whopping 7 orders of magnitude (∼10⁷) with just reaction temperature and duration increase, revealing a promising approach for the reduction of ρ of this highly resistive chalcogenide and hence resolving the earlier obstacles for its thermoelectric application potentials in the past few decades. Most astonishingly, a TE power factor at 300 K of the highest Bi content nanocomposite pellet, made at 27 °C using ∼900 MPa pressure, is 3 orders of magnitude greater than that of hot-pressed Bi₂S₃. Its highest ZT at 325 K of 0.006 is over twice of that of similarly prepared CuS or Ag₂S-based nanocomposites. A significantly improved TE performance potential near 300 K is demonstrated for these toxic-free and rare-earth element-free TE nanocomposites, making the present synthesis method as a pioneering approach for developing enhanced thermoelectric properties of Bi₂S₃-based materials without extra sintering steps.

Magnetic-field-assisted synthesis of anisotropic iron oxide particles: Effect of pH

The synthesis of magnetite (Fe3O4) nanorods using reverse co-precipitation of Fe3+ and Fe2+ ions in the presence of a static magnetic field is reported in this work. The phase composition and crystal structure of the synthesized material were investigated using electron diffraction, Raman spectroscopy, and transmission electron microscopy. It was shown that the morphology of the reaction product strongly depends on the amount of OH- ions in the reaction mixture, varying from Fe3O4 nanorods to spherical Fe3O4 nanoparticles. Fe3O4 nanorods were examined using high-resolution transmission electron microscopy proving that they are single-crystalline and do not have any preferred crystallographic orientation along the axis of the rods. According to the data obtained a growth mechanism was proposed for the rods that consists of the dipole-dipole interaction between their building blocks (small hexagonal faceted magnetite nanocrystals), which are formed during the first step of the reaction. The study suggests a facile, green and controllable method for synthesizing anisotropic magnetic nanoparticles in the absence of stabilizers, which is important for further modification of their surfaces and/or incorporation of the nanoparticles into different media.

Cd-Rich Alloyed CsPb1- x Cd x Br3 Perovskite Nanorods with Tunable Blue Emission and Fermi Levels Fabricated through Crystal Phase Engineering

One-dimensional semiconductor nanostructures have already been used for a variety of optoelectronic applications. Metal halide perovskites have emerged in recent years as promising high-performance optoelectronic materials, but reports on 1D nanorods (NRs) of all-inorganic halide perovskites are still scarce. This work demonstrates a synthetic strategy toward cesium-based inorganic perovskite NRs by exploiting composition-controlled crystal phase engineering. It is accomplished for Cd-rich mixed-cation CsPb1- x Cd x Br3 nanocrystals, where the initial 1D hexagonal perovskite phase drives the growth of the 1D NRs, as supported by first-principles calculations. The band gaps of the resulting NRs are tunable by varying the Cd-content, and the highly uniform CsPb0.08Cd0.92Br3 NRs (with an average length of 84 nm and width of 16 nm) exhibit a true blue-color emission centered at 460 nm, with a high quantum yield of 48%. Moreover, this work also demonstrates the tunability of the Fermi levels in the films made of CsPb1- x Cd x Br3 alloyed nanocrystals, where samples with highest Cd content show an increase of the electron concentration and a related increase in the conductivity.

Rational Design and Self-Assembly of Coiled-Coil Linked SasG Protein Fibrils

Protein engineering is an attractive approach for the self-assembly of nanometer-scale architectures for a range of potential nanotechnologies. Using the versatile chemistry provided by protein folding and assembly, coupled with amino acid side-chain functionality, allows for the construction of precise molecular "protein origami" hierarchical patterned structures for a range of nanoapplications such as stand-alone enzymatic pathways and molecular machines. The Staphyloccocus aureus surface protein SasG is a rigid, rod-like structure shown to have high mechanical strength due to "clamp-like" intradomain features and a stabilizing interface between the G5 and E domains, making it an excellent building block for molecular self-assembly. Here we characterize a new two subunit system composed of the SasG rod protein genetically conjugated with de novo designed coiled-coils, resulting in the self-assembly of fibrils. Circular dichroism (CD) and quartz-crystal microbalance with dissipation (QCM-D) are used to show the specific, alternating binding between the two subunits. Furthermore, we use atomic force microscopy (AFM) to study the extent of subunit polymerization in a liquid environment, demonstrating self-assembly culminating in the formation of linear macromolecular fibrils.

Fabrication of Ultraviolet Photodetectors Based on Fe-Doped ZnO Nanorod Structures

In this paper, 100 nm-thick zinc oxide (ZnO) films were deposited as a seed layer on Corning glass substrates via a radio frequency (RF) magnetron sputtering technique, and vertical well-aligned Fe-doped ZnO (FZO) nanorod (NR) arrays were then grown on the seed layer-coated substrates via a low-temperature solution method. FZO NR arrays were annealed at 600 °C and characterized by using field emission scanning microscopy (FE-SEM) and X-ray diffraction spectrum (XRD) analysis. FZO NRs grew along the preferred (002) orientation with good crystal quality and hexagonal wurtzite structure. The main ultraviolet (UV) peak of 378 nm exhibited a red-shifted phenomenon with Fe-doping by photoluminescence (PL) emission. Furthermore, FZO photodetectors (PDs) based on metal-semiconductor-metal (MSM) structure were successfully manufactured through a photolithography procedure for UV detection. Results revealed that compared with pure ZnO NRs, FZO NRs exhibited a remarkable photosensitivity for UV PD applications and a fast rise/decay time. The sensitivities of prepared pure ZnO and FZO PDs were 43.1, and 471.1 for a 3 V applied bias and 380 nm UV illumination, respectively.

Micromagnetic modelling of nanorods array-based L10-FeNi/SmCo5exchange-coupled composites

Exchange-coupled nanocomposites are considered as the most promising materials for production of high-energy performance permanent magnets, which can exceed neodymium ones in terms of energy product. In this work, micromagnetic simulations of L10-FeNi/SmCo5composites based on the initially anisotropic structure of nanorods array were performed. Texturing effect on magnetic properties was investigated. It was revealed that even 30% of anisotropy axes misalignment of grains in L10-FeNi phase would lead to only ≈10% drop of coercivity. To maximize magnetic properties of the composites, parameters of microstructure were optimized for 120 × 120 array of interacting nanorods and were found to be 40 nm nanorod diameter and 12-20 nm interrod distance. The estimated diameter of nanorods and the packing density of the array provide energy product values of 149 kJ m-3. Influence of interrod distance on energy product values was explored. Approaches for production of exchange-coupled composites based on anisotropic nanostructures were proposed.