High-performance carbon black electrode for oxygen reduction reaction and oxidation of atrazine by electro-Fenton process

The aim of this study is to produce an electrode that can be used in H₂O₂ production and Electro-Fenton (EF) process by an effective, cheap, and easy method. For this reason, a superhydrophobic electrode with a higher PTFE ratio and high thickness was produced with a simple press. The produced electrode was used in the production of H₂O₂ and mineralization of Atrazine. First, the effect of pH, cathode voltage, and operation time on H₂O₂ production was evaluated. The maximum H₂O₂ concentration (409 mg/L), the highest current efficiency (99.80%), and the lowest electrical energy consumption (3.16 kWh/kg) were obtained at 0.8 V, 7.0 of pH, and 120 min, and the stability of the electrode was evaluated up to 720 min. Then, the effects of the operational conditions (pH, cathode voltage, operating time, and catalyst concentration) in electro-Fenton were evaluated. The fastest degradation of Atrazine (>99%) was obtained at 2.0 V, 3.0 of pH, and 0.3 mM of Fe²⁺ in 15 min. In the final part of the study, the degradation intermediates were identified, and the characterization of the electrode was evaluated by SEM, XRD, FT-IR, tensiometer, potentiostat, and elemental analyzer.

Bifunctional nickel foam composite cathode co-modified with CoFe@NC and CNTs for electrocatalytic degradation of atrazine over wide pH range

Bifunctional cathodes have attracted widespread interest in the heterogeneous electro-Fenton (hetero-EF) process. In this study, the bifunctional composite cathode co-modified with N-doped carbon CoFe alloy (CoFe@NC) and carbon nanotubes (CNTs), designated as CoFe@NC-CNTs/CNTs/NF, integrating hydrogen peroxide (H₂O₂) synthesis and catalysis, was prepared for efficient degradation of atrazine (ATZ) under the near-neutral condition (pH_i = 5.9). The morphology properties, crystal structure, microstructures, and elemental composition were determined. The influences of current density, initial pH value, different anions, and water matrix on the removal of ATZ were systematically studied. In the hetero-EF process, high removal efficiencies of ATZ can be achieved over the broad pH range (3-9) under the current density of 4.5 mA cm^-2. The removal efficiency of ATZ remained at 90.2 ± 0.3% after 8 cycles under the near-neutral condition (pH_i = 5.9). Radical quenching tests and EPR spectra have verified that both free radical pathways such as superoxide anion (O₂·^-) and hydroxyl radical (·OH) and non-radical pathway such as singlet oxygen (¹O₂) contributed to ATZ removal. The degradation pathways and catalytic mechanism were proposed. Toxicity evaluation and Escherichia coli growth test showed that the toxicity gradually decreased during the degradation process. This work provided a new thought for developing an efficient and stable bifunctional cathode to construct an in-situ hetero-EF system for pollutants removal over the wide pH range.

Development of a data driven model to screen the priority control pesticides in drinking water based on health risk ranking and contribution rates

Pesticides are pollutants of high concern in drinking water. Several approaches aimed to promote pesticide risk management in drinking water have been brought forward by diverse ways, however, these methods usually take too many indicators into consideration, which are complex and non-universal. In this study, a more focused and data driven ranking model was proposed for the purpose of development of the priority control list in drinking water. By determining three parameters including the total health risks of dietary exposure pathways, drinking water contribution rates, and the drinking water health risks, pesticides could be divided into four categories including the priority control list, secondary control list, candidate control list, and non-regulatory list. As a case study, the proposed model was implemented for 23 pesticides detected in drinking water from 36 major cities across China during two major science and technology program for water pollution control and treatment. Totally 13 kinds of pesticides including carbofuran, dicofol, chlorpyrifos, 2,4-D, acetochlor, deltamethrin, dimethoate, heptachlor, parathion, hexachlorobenzene, DDT, hexachlorocyclohexane and atrazine are selected for priority control, methyl parathion, dichlorvos and chlorothalonil are recommended for secondary control, butachlor and malathion are classified into candidate control list, and fenobucarb is suggested to be removed from the pesticide control list.

Low-Level Groundwater Atrazine in High Atrazine Usage Nebraska Counties: Likely Effects of Excessive Groundwater Abstraction

Recent studies observed a correlation between estrogen-related cancers and groundwater atrazine in eastern Nebraska counties. However, the mechanisms of human exposure to atrazine are unclear because low groundwater atrazine concentration was observed in counties with high cancer incidence despite having the highest atrazine usage. We studied groundwater atrazine fate in high atrazine usage Nebraska counties. Data were collected from Quality Assessed Agrichemical Contaminant Nebraska Groundwater, Parameter-Elevation Regressions on Independent Slopes Model (PRISM), and water use databases. Descriptive statistics and cluster analysis were performed. Domestic wells (59%) were the predominant well type. Groundwater atrazine was affected by well depth. Clusters consisting of wells with low atrazine were characterized by excessive groundwater abstraction, reduced precipitation, high population, discharge areas, and metropolitan counties. Hence, low groundwater atrazine may be due to excessive groundwater abstraction accompanied by atrazine. Human exposure to atrazine in abstracted groundwater may be higher than the estimated amount in groundwater.

The Keap1/Nrf2-ARE signaling pathway is involved in atrazine induced dopaminergic neurons degeneration via microglia activation

OBJECTIVE

To investigate the mechanisms of ATR-induced dopaminergic toxicity by microglia activation and the response of the Keap1/ Nrf2- ARE signaling pathway.

METHODS

Wistar rats were treated with 50, 100 and 200 mg/kg ATR and BV-2 microglia cells were treated with 50, 100 μM ATR or 100 ng/mL LPS, respectively. Rats behavioral responses and histopathological changes were monitored. Immunohistochemical and immunofluorescence analysis detected Iba-1 and TH⁺ cells in rats. Keap1/Nrf2-ARE signaling-related proteins and inflammatory factors from BV-2 cells and rats were detected using ELISA, Western blot and Real-time PCR.

RESULTS

After ATR treatment, the grip strength of Wistar rats was significantly decreased, and anxiety were clearly observed. TH⁺ neurons were reduced, however, the number of microglia cells and Iba-1 levels were increased clearly in SN. The release of ROS, TNF-α and IL-Iβ were increased, and levels of SOD and GSH-Px were significantly decreased. Keap1 mRNA expression and protein levels were decreased, while nuclear Nrf2 mRNA expression and protein levels were both increased in vivo and in vitro.

CONCLUSION

ATR could significantly activate microglia and exacerbate neurotoxicity and neuroinflammation, leading to accelerate dopaminergic neuron cell death by inhibiting Keap1/Nrf2-ARE signaling pathway.

Enhancing degradation of atrazine by Fe-phenol modified biochar/ferrate(VI) under alkaline conditions: Analysis of the mechanism and intermediate products

In this study, Fe-phenol modified biochar was prepared to enhance atrazine (AT) degradation by ferrate (Fe(VI)) under alkaline conditions, and the properties, mechanism and transformation pathways were extensively investigated. Degradation experiments showed that Fe-phenol modified biochar was more beneficial for improving the oxidation capacity of Fe(VI) than unmodified biochar, and the biochar with a molar ratio of Fe³⁺ to phenol of 0.1:5 (BC-2) showed the best promoting effect, and more than 94% of AT was removed at pH = 8 within 30 min. Moreover, the rate of oxidation (k_app) of AT by Fe(VI) increased 1.86 to 4.11 times by the addition of BC-2 in the studied pH range. Fe(Ⅴ)/Fe(Ⅳ) and ·OH were the main active oxidizing species for AT degradation in the Fe(VI)/BC-2 group and contributed to 70% and 24%, respectively, of degradation. The formation of ·OH and Fe(Ⅴ)/Fe(Ⅳ) was mainly due to the persistent free radicals and reducing groups on the surface of BC-2. AT was oxidized to 12 intermediate products in the Fe(VI)/BC-2 group through 5 pathways: alkyl hydroxylation, dealkylation, dichlorination, hydroxylation, alkyl dehydrogenation and dichlorination. Compared with those of the initial solution, the total organic carbon content and toxicity after the reaction decreased by 32.8% and 19.02%, respectively. Therefore, the combination of Fe-phenol modified biochar and Fe(VI) could be a promising method for AT removal.

Highly selective oxidation of organic contaminants in the RuIII-activated peroxymonosulfate process: The dominance of RuVO species

Ruthenium (Ru^III)-activated peroxymonosulfate (the Ru^III/PMS process) is one of the most efficient PMS-based advanced oxidation processes for the abatement of organic contaminants. Here we interestingly found that phenyl methyl sulfoxide (PMSO) was significantly oxidized to phenyl methyl sulfone (PMSO₂) in the Ru^III/PMS process at the pH range of 3.0-6.0, with the conversion ratio of ΔPMSO to ΔPMSO₂ was close to 100%, which favored the dominance of high-valent ruthenium-oxo species (Ru^VO) instead of the widely-recognized radicals (i.e, hydroxyl radical and sulfate radical). Scavenging experiments further indicated that Ru^VO was unreactive to tert-butyl alcohol, but could be scavenged by methanol and dimethyl sulfoxide. Besides, sulfamethoxazole, acetaminophen, carbamazepine, diclofenac, 2,4,6-trichlorophenol were readily degraded in the Ru^III/PMS process, but atrazine, ibuprofen, benzoic acid and 4-nitrobenzoic acid were barely removed, suggesting the high selectivity of Ru^VO species. This study enriched the understandings on the mechanism of Ru^III-mediated PMS activation and the nature of Ru^VO species.

Direct and indirect photodegradation of atrazine and S-metolachlor in agriculturally impacted surface water and associated C and N isotope fractionation

Knowledge of direct and indirect photodegradation of pesticides and associated isotope fractionation can help to assess pesticide degradation in surface waters. Here, we investigated carbon (C) and nitrogen (N) isotope fractionation during direct and indirect photodegradation of the herbicides atrazine and S-metolachlor in synthetic agriculturally impacted surface waters containing nitrates (20 mg L^-1) and dissolved organic matter (DOM, 5.4 mg_C L^-1). Atrazine and S-metolachlor were quickly photodegraded by both direct and indirect processes (half-lives <5 and <7 days, respectively). DOM slowed down photodegradation while nitrates increased degradation rates. The analysis of transformation products showed that oxidation mediated by hydroxyl radicals (HO˙) predominated during indirect photodegradation. UV light (254 nm) led to significant C and N isotope fractionation, yielding isotopic fractionation values ε_C = 2.7 ± 0.3 and 0.8 ± 0.1‰, and ε_N = 2.4 ± 0.3 and -2.6 ± 0.7‰ for atrazine and S-metolachlor, respectively. In contrast, photodegradation under simulated sunlight led to negligible C and slight N isotope fractionation, emphasizing the effect of the radiation wavelengths on the isotope fractionation induced by direct photodegradation. Altogether, these results highlight the importance of using simulated sunlight to obtain environmentally-relevant isotopic fractionation values and to distinguish photodegradation and other dissipation pathways in surface waters.

Citrate iron complex induced dramatically enhanced oxidation of atrazine with bimetallic Bi/Fe0: Reactivity, oxidation and mechanism

The oxidative degradation of atrazine (ATR) using bimetallic Bi/Fe⁰ nanoparticles cooperated with citric acid (CA) and sodium citrate (NaCA) without extra addition of H₂O₂ or another oxidant was conducted. Almost 73% of ATR was removed in Bi/Fe⁰+NaCA + CA buffer system in 3 h, and the bimetallic Bi/Fe⁰ performs high stability and long service life in the buffer system according to the results of cyclic degradation experiments. The citrate iron complex of Fe(II)[Cit]^- played the key role for the degradation process since it could quickly react with the generated H₂O₂ to produce free radicals in the Bi/Fe⁰+NaCA + CA system, which broadened the applicable pH range of the traditional Fenton reaction and promoted the oxidative degradation process of ATR. The possible degradation pathways of ATR were also investigated. In the Bi/Fe⁰+NaCA + CA buffer system, twelve kinds of ATR intermediate products were detected, of which the main products were dechlorination products and alkyl oxidative products. Due to the pH controllable of the Bi/Fe⁰+NaCA + CA system, it could reduce the acidity impact on the environment and makes the additional impact on the environment lower. Therefore, this work provides a new strategy for the degradation of ATR.

Triple-Element Compound-Specific Stable Isotope Analysis (3D-CSIA): Added Value of Cl Isotope Ratios to Assess Herbicide Degradation

Multielement isotope fractionation studies to assess pollutant transformation are well-established for point-source pollution but are only emerging for diffuse pollution by micropollutants like pesticides. Specifically, chlorine isotope fractionation is hardly explored but promising, because many pesticides contain only few chlorine atoms so that "undiluted" position-specific Cl isotope effects can be expected in compound-average data. This study explored combined Cl, N, and C isotope fractionation to sensitively detect biotic and abiotic transformation of the widespread herbicides and groundwater contaminants acetochlor, metolachlor, and atrazine. For chloroacetanilides, abiotic hydrolysis pathways studied under acidic, neutral, and alkaline conditions as well as biodegradation in two soils resulted in pronounced Cl isotope fractionation (ε_Cl from -5.0 ± 2.3 to -6.5 ± 0.7‰). The characteristic dual C-Cl isotope fractionation patterns (Λ_C-Cl from 0.39 ± 0.15 to 0.67 ± 0.08) reveal that Cl isotope analysis provides a robust indicator of chloroacetanilide degradation. For atrazine, distinct Λ_C-Cl values were observed for abiotic hydrolysis (7.4 ± 1.9) compared to previous reports for biotic hydrolysis and oxidative dealkylation (1.7 ± 0.9 and 0.6 ± 0.1, respectively). The 3D isotope approach allowed differentiating transformations that would not be distinguishable based on C and N isotope data alone. This first data set on Cl isotope fractionation in chloroacetanilides, together with new data in atrazine degradation, highlights the potential of using compound-specific chlorine isotope analysis for studying in situ pesticide degradation.

Investigating the Effects of Pesticides on Ramshorn Snails (Planorbella [Helisoma] trivolvis) Infected with Echinostoma spp

Globally, parasite-induced diseases in humans and wildlife are on the rise, and pesticide pollution may be a contributing factor. Echinostoma spp. trematode parasites are prominent in North America, and they use ramshorn snails (Planorbella [Helisoma] trivolvis) as intermediate hosts. We investigated the impact of chronic exposure to 1 of 5 pesticide treatments (control, or 50 μg/L of atrazine, glyphosate, carbaryl, or malathion) on uninfected and Echinostoma-infected snails for 41 d in the laboratory. We recorded snail mortality, the number of egg masses laid, change in mass, and behavior. Chronic exposure to atrazine, carbaryl, and malathion significantly decreased snail survival, whereas parasite infection status or exposure to glyphosate did not. Pesticide and parasite treatments did not influence growth or behavior, but parasite infection caused complete reproductive failure in snail hosts. Our results indicated that the direct effects of pesticides could threaten snail populations in natural environments and disrupt host-parasite dynamics.  Environ Toxicol Chem 2021;40:2755-2763. © 2021 SETAC.

Translation, ribosome biogenesis, and oxidative damage caused by chlorpyrifos exposure to common carp (Cyprinus carpio L.) liver: application of combined RNA-seq with sRNA-seq in risk evaluation of environmental toxicant chlorpyrifos

Pesticide chlorpyrifos (CPF) is a widespread environmental pollutant gaining attention as it is highly injurious to aquatic life. Although the toxicity of CPF is well characterized, but the mechanism of toxic response especially, the hepatotoxicity remained unclear. In this study, we performed integrated analysis, including micro-RNA (miRNA) and small RNA (sRNA) to analyze CPF exposure responding genes and enrichment pathways. A total of 23,742 expressed genes were detected and out of these expression levels of 1746 were changed significantly. Majority of them participated in protein biosynthesis, nucleotide binding, and oxidation-reduction activities. In extensive analysis of micro-RNA (miRNA) expression profiles by comparing CPF treated carp with control, we identified 214 novel miRNAs with CPM > 5 in at least one sample. The miRNAs have the same change in direction compared with overlapped mRNA pairs in upregulated genes, suggesting potential positive correlation. As a whole, we detected many differently expressed genes (DEGs) and miRNAs, which may be used as the biomarkers for the detection of CPF pollution in water and aquatic product safety. However, their functions are required to be deeply analyzed, especially more samples or time pointed data are needed to illustrate their concrete mechanism.

Sorption mechanisms of pesticides removal from effluent matrix using biochar: Conclusions from molecular modelling studies validated by single-, binary and ternary solute experiments

Sorption of atrazine (ATZ), imidacloprid (IMIDA) and azoxystrobin (AZOXY) in single-, bi- and ternary-solutes system was modelled using phosphoric acid-treated rice straw biochar (T-RSBC). The T-RSBC showed stronger sorption capacity for IMIDA in single- and bi-solute systems. The Freundlich constant (K_Fads) in ternary system followed the order: ATZ (222.7) < IMIDA (1314) < AZOXY (1459). Adsorption modeling and molecular dynamics suggested that non-bonding interactions between aromatic groups and electrostatic interactions with the phosphate ester group in T-RSBC played an important role. Enhanced sorption by pore-filling may be attributed to the stacking of pesticide molecules in the form of multilayer. IMIDA was predominantly sorbed by pore-filling mechanism, whereas, ATZ adsorbed by partitioning mechanism. The percent removal of three pesticides in waste water effluent followed the order: AZOXY > IMIDA > ATZ. The Freundlich isotherm based multicomponent Sheindorf-Rebuhn-Sheintuch equation's suggested that the extent of ATZ adsorption, in the presence of co-habiting pesticides, decreased with increase in number of solutes (K_{iATZ, Single}v> K_{iATZ, Binary}> K_{iATZ, Ternary}). The competitive coefficient values (α_{ATZ/IMIDA, Ternary >} α_{ATZ/AZOXY,Ternary}) revealed that ATZ adsorption in ternary system was inhibited more by the presence of IMIDA than AZOXY. Findings suggested that biochar with a large fraction of non-carbonized phase promoted non-competitive sorption.

Effects of Fe(III) and Cu(II) on the sorption of s-triazine herbicides on clay minerals

The effects of Fe(III) and Cu(II) on the sorption of atrazine (AT) and prometryn (PY) on clay minerals were investigated both preloaded and in solution. For smectite, Fe(III) preloading greatly enhanced AT and PY sorption at pH 4.0 and 6.0 but diminished AT sorption at pH 8.0. Cu(II) preloading promoted AT and PY sorption under alkaline conditions but suppressed AT sorption at pH 4.0. The adverse effects were not obvious for PY. While for illite and kaolinite, Fe(III) and Cu(II) had little or promotion effects due to the lower contents of them in these two minerals. In the co-sorption studies, for smectite, AT sorption remained at pH 4.0 and increased at pH 6.0 and 8.0, while PY sorption was inhabited over the pH range of 4.0-8.0 in the presence of Fe(III). AT and PY sorption were not affected by Cu(II) except for PY at pH 8.0, in which case, the sorption was promoted. For illite and kaolinite, Fe(III) and Cu(II) generally enhanced AT and PY sorption.

A novel diagnostic method for distinguishing between Fe(IV) and •OH by using atrazine as a probe: Clarifying the nature of reactive intermediates formed by nitrilotriacetic acid assisted Fenton-like reaction

In this work, we found that the distribution of two specific atrazine (ATZ) oxidation products (desethyl-atrazine (DEA) and desisopropyl-atrazine (DIA)) was different in oxidation processes involving aqueous ferryl ion (Fe(IV)) species and ^•OH. Specifically, the molar ratio of produced DEA to DIA (i.e., [DEA]/[DIA]) increased from 7.5 to 13 with increasing pH from 3 to 6 when ATZ was oxidized by Fe(IV), while the treatment of ATZ by ^•OH led to the [DEA]/[DIA] value of 2 which was independent of pH. Moreover, ATZ showed high reactivity towards Fe(IV) over a wide pH range, especially at near-neutral pH, at which ATZ oxidation in Fe(II)/peroxydisulfate system was even much faster than another well-defined Fe(IV) scavenger, the sulfoxides. By using this approach, it was obtained that the [DEA]/[DIA] value remained at 2 during ATZ transformation by the nitrilotriacetic acid (NTA) assisted Fenton-like (Fe(III)/H₂O₂) system, which was independent of solution pH and reactants dosage. This result clarified that ^•OH was the primary reactive intermediate formed in the NTA assisted Fe(III)/H₂O₂ system. This study not only developed a novel sensitive diagnostic tool for distinguishing Fe(IV) from ^•OH, but also provided more credible evidence to the nature of reactive intermediate in a commonly controversial system.

Adsorptive removal of noxious atrazine using graphene oxide nanosheets: Insights to process optimization, equilibrium, kinetics, and density functional theory calculations

Atrazine is a toxic herbicide whose alarming rate of contamination in the drinking water and wastewater poses a severe threat to the environment and human health. Here in this study, the graphene oxide (GO) nanosheets were prepared using Hummers' method with minor modification and studied as a potential adsorbent for atrazine removal from simulated wastewater. The spectroscopy and microscopic analysis confirmed the successful formation of GO with a multilayer structure resembling the crumpled sheets with random stacking. The Response Surface Methodology (RSM) employing Box Behnken design (BBD) was successfully developed to predict the optimal conditions for maximal atrazine removal as adsorbent dosage 121.45 mg/L; initial feed concentration 27.03 mg/L; temperature 27.69 °C, pH 5.37, and time 180 min. The atrazine adsorption onto GO was found to be higher in acidic pH and lower temperature. Density functional theory (DFT) calculation of adsorbent-adsorbate complex in the implicit solvent medium suggests adsorption affinity energy of -24.4 kcal/mol for atrazine. A careful observation of the molecules configuration and binding energy showed that the π-π interactions and hydrogen bonds played a significant role in the adsorption phenomena. Langmuir isotherm suited well to the adsorption process with a maximum adsorption capacity of 138.19 mg/g, at 318 K. The fitness of kinetic models for atrazine adsorption onto GO nanosheets were in following order Ho < Sobkowsk-Czerwi < Avrami model based on their correlation coefficient (R²) values. Reusability analysis showed that GO nanosheets could be effectively recycled using 0.01 N NaOH up to six cycles of atrazine removal. Thus, this study provided a theoretical and experimental basis for the potential application of GO nanosheets as a novel adsorbent for the removal of hazardous atrazine.

Estimating simazine-treated area in watersheds based on annual stream loads

Existing data in the United States are insufficient for estimating pesticide-treated crop areas at the watershed scale. The objective of this research was to evaluate an approach for estimating simazine usage on corn (Zea mays L.) based on its transport to streams of the Salt River Basin (SRB) of Missouri, USA. Annual loads of total simazine and atrazine (parent + metabolites) were quantified for seven SRB watersheds from 2005 to 2017. Simazine-treated corn area was computed as the total simazine load (g) divided by total atrazine load (g ha^-1 ) on a treated area basis; atrazine was used as surrogate in the absence of treated area simazine load data. From 2005 to 2010, an estimated 3.8-31% of the corn area within SRB watersheds was treated with simazine, and four of six watersheds had <10% of corn treated. In contrast, Long Branch Creek (2005-2017) and its sub-watersheds (2012-2017) had ≥20% of corn area treated with simazine. Key sources of variation in treated area estimates included extremely dry years with little simazine transport and disparities between spring-applied atrazine and fall-applied simazine transport. However, compared with national estimates for the SRB, these results estimated simazine usage that was generally one to two orders of magnitude greater and showed far more spatial and temporal variation among watersheds. These results demonstrated that this broadly applicable output-based method is a significant improvement over existing input-based national data for estimating pesticide usage in watersheds.

Lipidomic Profiling of Algae with Microarray MALDI-MS toward Ecotoxicological Monitoring of Herbicide Exposure

Misuse of agrochemicals has a long-lasting negative impact on aquatic systems. Mismanagement of herbicides in agri-food sectors is often linked to a simultaneous decline in the health of downstream waterways. However, monitoring the herbicide levels in these areas is a laborious task, and modern analytical approaches, such as solid-phase extraction-liquid chromatography-mass spectrometry (SPE-LC-MS) and enzyme-linked immunosorbent assay, are low-throughput and require significant sample preparation. We report here the use of microchip technology in combination with matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) for the assessment of the ecotoxicological effect of agrochemicals on aquatic species at the single-cell level. This approach quantifies the fluctuations in lipid content in sentinel organisms and targets the microalga, Chlamydomonas reinhardtii (C. reinhardtii), as the model system. Specifically, we investigated the cytotoxicity of three herbicides (atrazine, clomazone, and norflurazon) on C. reinhardtii by analyzing the lipid component variation upon assorted herbicide exposure. Lipidomic profiling reveals a significantly altered lipid content at >EC₅₀ in atrazine-exposed cells. The response for norflurazon showed similar trends but diminished in magnitude, while the result for clomazone was near muted. At lower herbicide concentrations, digalactosyldiacylglycerols showed a rapid decrease in abundance, while several other lipids displayed a moderate increase. The microchip-based MALDI technique demonstrates the ability to achieve lipidomic profiling of aquatic species exposed to different stressors, proving effective for high-throughput screening and single-cell analysis in ecotoxicity studies.

Symbiotic microalgae do not increase susceptibility of zooxanthellate medusae (Cassiopea xamachana) to herbicides

Herbicides are among the most detected pesticides in coastal environments. Herbicides may impact non-target organisms, but invertebrates that have a symbiotic relationship with microalgae (zooxanthellae) may be particularly susceptible. How zooxanthellae influence the response of organisms to herbicides, however, remains untested. We exposed zooxanthellate and azooxanthellate Cassiopea xamachana medusae to environmentally relevant concentrations of the herbicide atrazine (0 µg L ^- 1, 7 µg L ^- 1 and 27 µg L ^- 1) for 20 days. We hypothesised that atrazine would have adverse effects on the size, rate of bell contractions and, respiration of medusae, but that effects would be more severe in zooxanthellate than azooxanthellate medusae. We also predicted that photosynthetic efficiency, chlorophyll a (Chla) content and zooxanthellae density would decrease in zooxanthellate medusae exposed to atrazine. Both zooxanthellate and azooxanthellate medusae shrank, yet the size-specific respiration rates were not constant during the experiment. Photosynthetic efficiency of zooxanthellate medusae significantly decreased at 7 and 27 µgL^-1 atrazine, but atrazine did not affect the Chla content or zooxanthellae density. Our results showed that even though atrazine inhibited photosynthesis, zooxanthellae were not expelled from the host. We conclude that the presence of zooxanthellae did not increase the susceptibility of C. xamachana medusae to atrazine.

Effects of atrazine short-term exposure on jumping ability and intestinal microbiota diversity in male Pelophylax nigromaculatus adults

Atrazine, a common chemical pesticide, has toxicity to adult and juvenile amphibians in natural ecosystems; however, it is more common to study its effects on larvae instead of adults. This study assessed the impacts of atrazine in water through short-term exposure (7 days) on male black spotted frog (Pelophylax nigromaculatus) adults fed every day. The jumping ability, including jumping height, distance, time, and speed, was measured by 3D motion analysis software, and the intestinal content microbiota was determined by 16S rRNA amplicon sequencing with QIIME software. The results showed that male P. nigromaculatus exposure to 200 and 500 μg/L atrazine significantly increased jumping distance and jumping time compared to control groups. Conversely, 500 μg/L atrazine treatments significantly decreased the diversity and changed the composition and structure of intestinal content microflora in male P. nigromaculatus compared to control groups. At the phylum level, Chlamydiae was only detected in the control group, and Actinobacteria, Bacteroidetes, Firmicutes, Fusobacteria, and Proteobacteria were the dominant microflora in the atrazine treatment groups. At the genus level, the abundance of Lactobacillus and Weissella significantly increased in atrazine treatment groups compared to control groups. This study can provide a new framework based on movement behavior and intestinal microbiota to evaluate the response of amphibians to short-term exposure to environmental pollution.

Unveiling spatial variability in herbicide soil sorption using Bayesian digital mapping

Regional mapping herbicide sorption to soil is essential for risk assessment. However, conducting analytical quantification of adsorption coefficient (K_d ) in large-scale studies is too costly; therefore, a research question arises on goodness of K_d spatial prediction from sampling. The application of a spatial Bayesian regression (BR) is a newer technique in agricultural and natural resources sciences that allows converting spatially discrete samples into maps covering continuous spatial domains. The objective of this work was to unveil herbicide sorption to soil at a landscape scale by developing a predictive BR model. We integrated a large set of ancillary soil and climate covariables from sites with K_d measurements into a spatial mixed model including site random effects. The models were fitted using glyphosate and atrazine K_d s, determined in 80 and 120 sites, respectively, from central Argentina. For model assessment, measurements of global and point-wise prediction errors were obtained by cross-validation; residual variability was estimated by bootstrap to compare BR with regression kriging. Results showed that the BR spatial predictions outperformed regression kriging. The glyphosate K_d model (root mean square prediction error, 13% of the mean) included aluminum oxides, pH, and clay content, whereas the atrazine K_d model strongly depended on soil organic carbon and clay and on climatic variables related to water availability (root mean square prediction error, 27%). Spatial modeling of a complex edaphic process as herbicide sorption to soils enhanced environmental interpretations. An efficient approach for spatial mapping provides a modern perspective on the study of herbicide sorption to soil.

Phytoremediation potential of three terrestrial plant species for removal of atrazine, azoxystrobin, and imidacloprid

Pesticides can move off-target resulting in contamination of sensitive water bodies and causing adverse effects on inhabiting species. Through best management practices, such as the implementation of vegetative buffer strips, off-target movement of pesticides can be decreased, and compound degradation can be increased via phytoremediation. In this study, blueflag iris (Iris versicolor), broomsedge (Andropogon virginicus) and switchgrass (Panicum virgatum) were planted in soil treated with one of three commonly used pesticides. At 28, 56 and 112 days after treatment (DAT), plants were destructively harvested and analyzed for pesticide residue in soil and above-ground and below-ground vegetation using high-performance liquid chromatography (HPLC). Relative to the amount of pesticide found in planted pots compared to non-planted pots, I. versicolor was found to reduce greater atrazine in soil compared to non-planted pots at 112 DAT by 58.7%. I. versicolor was also the most capable of reducing azoxystrobin, by 86.9% compared to non-planted pots, from the soil at 112 DAT. At the same sampling time, I. versicolor and P. virgatum reduced greater imidacloprid from soil by 62.5% and 64.3% compared to non-planted pots, respectively. This information supports the recommendation for establishment of diverse plant species for optimization of phytoremediation capacities. Novelty statement While research has found that plants can absorb and remediate synthetic chemicals, this practice is only sustainable if used with native plants that require low maintenance and are tolerant to the applied substances. Various previous studies observe plants that are fast-growing, tolerant to environmental conditions, require low-maintenance, and are hardy. However, these plant species are not always suitable for any location and are often considered invasive and/or weed-like. The present research initiates a list of plant species which can be used within the southeastern United States and similar areas to phytoremediate commonly used pesticides atrazine, azoxystrobin, and imidacloprid and prevent off-target movement.

Future efficacy of pre-emergence herbicides in corn (Zea mays) is threatened by more variable weather

BACKGROUND

By 2050, weather is expected to become more variable with a shift towards higher temperatures and more erratic rainfall throughout the U.S. Corn Belt. The effects of this predicted weather change on pre-emergence (PRE) herbicide efficacy have been inadequately explored. Using an extensive database, spanning 252 unique weather environments, the efficacy of atrazine, acetochlor, S-metolachlor, and mesotrione, applied PRE alone and in combinations, was modeled on common weed species in corn (Zea mays L.).

RESULTS

Adequate rainfall to dissolve the herbicide into soil water solution so that it could be absorbed by developing weed seedlings within the first 15 days after PRE application was essential for effective weed control. Across three annual weed species, the probability of effective control increased as rainfall increased and was maximized when rainfall was 10 cm or more. When rainfall was less than 10 cm, increasing soil temperatures had either a positive or negative effect on the probability of effective control, depending on the herbicide(s) and weed species. Herbicide combinations required less rainfall to maximize the probability of effective control and had higher odds of successfully controlling weeds compared with the herbicides applied individually.

CONCLUSIONS

Results of this study highlight the importance of rainfall following PRE herbicide application. As rainfall becomes more variable in future, the efficacy of common PRE herbicides will likely decline. However, utilizing combinations of PRE herbicides along with additional cultural, mechanical, biological, and chemical weed control methods will create a more sustainable integrated weed management system and help U.S. corn production adapt to more extreme weather. © 2021 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Electrochemical degradation of atrazine by BDD anode: Evidence from compound-specific stable isotope analysis and DFT simulations

Direct charge transfer (DCT) and •OH attack played important roles in contaminant degradation by BDD electrochemical oxidation. Their separate contributions and potential bond-cleavage processes were required but lacking. Here, we carried out promising compound-specific isotope fractionation analysis (CSIA) to explore ¹³C and ²H isotope fractionation of atrazine (ATZ), followed by assessing the reaction pathway by BDD anode. The correlation of ²H and ¹³C fractionation allows to remarkably differentiate DCT process and •OH attack, with Λ values of 18.99 and 53.60, respectively. Radical quenching identified that •OH accounted for 79.0%-88.5% in the whole reaction. While CSIA methods provided biased results, which suggested that ATZ degradation exhibited two stages with •OH contributions of 24.6% and 84.3% respectively, confirming CSIA was more sensitive and provided more possibilities to estimate degradation processes. Combined with Fukui index and intermediate products identification, we deduced that dechlorination-hydroxylation mainly occurred in the first 30 min by DCT reaction. While lateral chain oxidation with C-N broken was the governing route once •OH was largely generated, with the production of DEA (m/z 188), DIA (m/z 174), DEIA (m/z 146) and DEIHA (m/z 128). Our results demonstrated that isotope fractionation can offer "isotopic footprints" for identifying the rate-limiting steps and bond breakage process, and opens new avenues for degradation pathways of contaminants.

Eco-friendly synthesis of nanostructured mesoporous materials from natural source rice husk silica for environmental applications

Nanostructured mesoporous materials of MCM-41 type were synthesized using a natural, non-toxic, and cheap source of silica from rice husk. Then, this pure silica was modified with several Fe loadings by a wet impregnation method. The chemical and physic properties of MCM-41 solids obtained were similar to those of MCM-41 synthesized from commercial silica by conventional method. Thus, all catalysts exhibited good structural regularity preserving the mesoporosity after the metal incorporation. The performance of the Fe/MCM-RHA composites as photo-Fenton heterogeneous catalysts was evaluated for photocatalytic degradation of different endocrine-disrupting chemicals (EDCs), such as herbicides (atrazine), and compounds derived from the plastic industry (bisphenol A) and the pharmaceutical industry (acetaminophen). The major photo-catalytic efficiency obtained (Fe/MCM-RHA(2.5)) is consistent with the highest presence of iron species, which are finely dispersed and stabilized on the silica structure, the isolated Fe³⁺ ions being the accessible and active sites for the reaction. Finally, a cheaper solid arising from the valorization of residual biomass and with excellent photocatalytic performance for the degradation of EDCs (above 99%, 75%, and 60% for BPA, ATZ, and ACE respectively, in a reaction time of 240 min) was obtained.