Resonant x-ray reflectivity from a bromine-labeled fatty acid Langmuir monolayer

Resonant x-ray reflectivity exploits the energy dependence of atomic scattering factors to locate resonant atoms within the electron density distribution of thin films. We apply the technique to a monolayer of bromo-stearic acid at the air/water interface. The data collection protocol employed cycles through several energies in the vicinity of the bromine K absorption edge and verifies that the energy dependencies observed are indeed resonant effects. The analysis specifies the location of the Br atom with sub-angstrom precision and must consider both the real and imaginary parts of the changes in the scattering factor to be consistent with the known structure and stoichiometry of this test case.

Synchrotron X-ray fluorescence and trace metals in the cementum rings of human teeth

Synchrotron micro X-ray fluorescence has been used to study differences in the trace element concentration between the dentine and cementum rings of human teeth. The results show that metals such as zinc are concentrated in the cementum rings. This suggests that if the rings are deposited annually a temporal record of metal exposure may be extracted from this material.

The individual and cumulative effect of brominated flame retardant and polyvinylchloride (PVC) on thermal degradation of acrylonitrile-butadiene-styrene (ABS) copolymer

Acrylonitrile-butadiene-styrene (ABS) copolymers without and with a polybrominated epoxy type flame retardant were thermally degraded at 450 degrees C alone (10 g) and mixed with polyvinylchloride (PVC) (8 g/2 g). Gaseous and liquid products of degradation were analysed by various gas chromatographic methods (GC with TCD, FID, AED, MSD) in order to determine the individual and cumulative effect of bromine and chlorine on the quality and quantity of degradation compounds. It was found that nitrogen, chlorine, bromine and oxygen are present as organic compounds in liquid products, their quantity depends on the pyrolysed polymer or polymer mixture. Bromophenol and dibromophenols were the main brominated compounds that come from the flame retardant. 1-Chloroethylbenzene was the main chlorine compound observed in liquid products. It was also determined that interactions appear at high temperatures during decomposition between the flame retardant, PVC and the ABS copolymer.

Sensory evaluation of the odors produced during bromophenol formation using a multi-level statistical model

In response to reports of medicinal taste and odor problems in suburban Paris, a lab scale study was conducted to investigate the contribution of different water quality parameters--pH, phenol, bromide, chlorine, temperature and dissolved oxygen levels--on bromophenol medicinal odor formation using the Flavor Profile Analysis (FPA) method. A study of six parameters at 2 levels (64 experiments) analyzed by the FPA method suggests that chlorine at high concentration is more important as a controlling agent than phenol under similar conditions and the ratio of HOBr:Phenol and the time for reaction will control subsequent brominated products of reaction. Results from a three-level statistical model indicate that high pH was associated with lower odor intensities, whereas high levels of chlorine, phenol and temperature were associated with high odor intensities. Potential worst case scenarios of water quality conditions were determined for evaluation by chemical identification and kinetics.

Natural mercury enrichment in a minerogenic fen—evaluation of sources and processes

Mercury (Hg) records in natural archives such as peat bogs are often used to evaluate anthropogenic or climatic influences on atmospheric Hg deposition. In this context, there is an ongoing discussion about natural sources or processes of Hg enrichment in natural archives. In the present study we estimated Hg fluxes from rock weathering, direct atmospheric deposition and from indirect atmospheric deposition in the catchment of a pristine minerogenic fen (GC2) located in the Magellanic Moorlands, southernmost Chile. The Hg record in the bog covers 11 174 cal. (14)C years and shows Hg concentrations of up to 570 [micro sign]g kg(-1) with an average of 268 [micro sign]g kg(-1). Hg was found to be enriched in the peat by a factor of 81 if compared to the mean Hg concentrations in the rocks of the catchment (3.2 [micro sign]g kg(-1)). Hg and also Pb, Fe, and As were found to be enriched predominately in goethite layers indicating high retention of these elements in the bog by iron oxyhydrates. It could also be demonstrated that the high peat decomposition rates in minerogenic bogs can increase the Hg concentrations in the minerogenic peat by a factor of approximately 2 at the same atmospheric Hg deposition rate if compared to ombrotrophic sites. This study has shown that Hg in minerogenic peat can be naturally enriched especially through the retention by autochthonous formed goethite and can be a solely internal process which does not require increased external Hg fluxes.

Capillary gas chromatography with atomic emission detection for pesticide analysis in soil samples

A method for the simultaneous determination of 10 pesticides (organochlorines, organophosphorus compounds, and pyrethrins) in soils using capillary gas chromatography with atomic emission detection (GC-AED) is reported. Soil samples are first "cleaned-up" with 25 mL of an ascorbic acid solution (pH 2.15). The aqueous phase is extracted with ethyl acetate, and the solid residue is then extracted twice with 10 mL of ethyl acetate. The three resultant organic extracts are combined, concentrated to dryness, and reconstituted in 1 mL of acetone. The pesticides are selectively detected by monitoring chlorine and bromine in the first run and sulfur emission line wavelength in the second run. Each chromatographic run takes 19 min. Detection limits are between 25 and 75 pg, depending on the compound, which corresponds to 1.7 and 5.0 ng/g in the soil samples, respectively. Recoveries of the pesticides from spiked preparations result in an overall mean recovery of 95.3% (n = 120) at fortification levels ranging from 10 to 60 ng/g, depending on the compound. The method is reliable and can be useful for routine monitoring in soils.

Heterogeneous photochemical reactions of decabromodiphenyl ether

Brominated diphenyl ethers are a major class of brominated flame retardants, with production of decabromodiphenyl ether (DBDPE) contributing significantly to this total. Although little is known about the mechanisms and rates of DBDPE decay in the natural environment, photochemical transformation is often suggested as a potentially important fate process. In this study, photochemical reactions of DBDPE precipitated onto hydrated surfaces (quartz glass, silica particles, and humic acid-coated silica particles) were measured. Decabromodiphenyl ether was irradiated within a Rayonet photochemical reactor equipped with lamps having maximum emissions (lambdamax) at 300 or 350 nm or with sunlight (West Lafayette, IN, USA at 40 degrees 26'N, 86 degrees 55'W). When DBDPE is plated onto quartz tubes and hydrated with reagent-grade water, phototransformation occurred over a period of days with each light source. With two lamps (lambdamax = 300 nm), about 31% of the initial mass of DBDPE remained after 60 h in the Rayonet reactor. Decabromodiphenyl ether transformed more slowly when irradiated by sunlight, with 30% of the initial compound recovered from tubes after 72 h. In the presence of humic acid (HA) solution, transformation of DBDPE by solar irradiation is slowed even further: approximately 70% remained after 72 h. Solar irradiation of DBDPE adsorbed to humic acid-coated sand particles resulted in the slowest irradiation rates; approximately 88% of the initial mass was recovered after 96 h of exposure. Although the parent compound exhibited slow transformation, analysis by high-performance liquid chromatography (HPLC) indicated some accumulation of transformation products.

Bromine in waste incineration: partitioning and influence on metal volatilisation

INTENTION, GOAL, SCOPE, BACKGROUND

The halogen bromine is far less abundant than chlorine, but it can be found at high concentrations in special materials like flame retarded plastics. The fate and effects of Br in waste incineration are not well understood. It may have similar implications like Cl for the volatilisation of heavy metals and the formation of low volatile organic compounds. Due to its lower oxidation potential, there is a risk of formation of elementary Br2 in the offgas.

OBJECTIVE

Co-combustion tests of different types of Br containing plastic waste materials (up to 22%) and MSW in the TAMARA pilot plant for waste incineration were conducted to investigate the Br partitioning and the influence of Br on metal volatilisation.

METHODS

The Br inventory of the fuel mix was elevated to approx. 1 wt-%. All input and output mass flows of the furnace have been sampled and the partitioning of Cl, Br, S, and a number of heavy metals, has been calculated on the basis of closed mass balances.

RESULTS AND DISCUSSION

Organically-bound Br was typically released to more than 90% into the raw gas. Elementary Br2 was detected at high Br levels. Its presence was always analysed when all SO2 in the raw gas was oxidised to SO3. Br enhances the volatilisation of metals like K, Zn, Cd, Sn, Sb, and Pb out of the fuel bed principally in the same way as Cl. The tests gave strong indication that the promoting influence of the halogens on metal volatilisation is more pronounced than that of the fuel bed temperature. The volatilised metals are condensated on the fly ashes and are discharged along with the filter ashes.

CONCLUSIONS

As long as a surplus of SO2 is present in the raw gas no Br2 is formed. Although the halogen induced transfer out of the fuel bed causes high concentrations of volatile metals in the filter ashes, a recovery is not economically feasible for the time being. The volatilisation gives no rise to metal emission problems as long as efficient dedusting is achieved.

RECOMMENDATION AND OUTLOOK

If there is a risk of Br2 formation, in wet scrubbing a reducing agent has to be added to the neutral scrubber for efficient abatement. Filter ashes should be disposed of in a way that enables access for recovery in the future. The exact volatilisation characteristics of the various metals have to be studied in future using specifically tailored experiments.

Determination of chlorine and bromine in automotive shredder residues by oxygen bomb and ion chromatography

An analytical procedure, oxygen bomb combustion-ion chromatography (IC), has been developed for the determination of total chlorine in Automotive Shredder Residues (ASR). Samples of these residues are fired under elevated oxygen pressure (30 atm) and the combustion products are transferred into a Na2CO3/NaHCO3 absorbent solution containing 1% of H2O2; the chlorine contents are then evaluated by ion chromatography. The use of the non-suppressed IC determination with a conductivity detector provides a rapid, sensitive and selective method for chlorine determination in ASR, allowing determinations of this heteroatom at levels below 1% in the presence of bromine and sulfur. Moreover, the proposed method allows the simultaneous determination of chlorine, bromine and sulfur which are potential environmental hazards.

Improved computed radiography image quality from a BaFl:Eu photostimulable phosphor plate

Recent advances in the design of photostimulable phosphor (PSP) plates for computed radiography (CR) systems have made it possible to manufacture plates made of BaFI:Eu phosphor material in the cassette form. The image quality of this plate, six BaF(Br,I):Eu plates, and one BaFBr:Eu plate were evaluated in terms of presampling modulation transfer function (MTF), normalized Wiener spectra (WSN), and detective quantum efficiency (DQE). Compared with the best-performing BaF(Br,I):Eu plate, the BaFI:Eu plate provided DQE that was higher, at spatial frequencies of 0.5, 1.0, and 2.0 cycles/mm, by 12% (21.8 versus 19.4), 13% (18.8 versus 16.7), and 11% (12.0 versus 10.8), respectively. Since presampling MTF values of the two plates were comparable, the BaFI:Eu plate's higher DQE is attributable to total WSN conversely being lower by 17% [8.65 x 10(-5) (mm2) versus 10.38 x 10(-5) (mm2)], 17% [5.85 x 10(-5) (mm2) versus 7.03 x 10(-5) (mm2)], and 12% [2.82 x 10(-5) (mm2) versus 3.19 x 10(-5) (mm2)] at the specified frequencies, respectively, primarily due to the contribution of x-ray quantum WSN. This jibes with the high x-ray absorption provided by the 27%-higher x-ray attenuation coefficients (7.54 versus 6.07, at 60 KeV) that BaFI offers over BaF(Br(0.85),I(0.15)), a result of the high atomic number of BaFI's exclusively iodine halide content. The results were consistent with earlier studies of several of these same plates and indicate that BaFI:Eu is a promising avenue to lower image noise and higher overall CR system image quality.

Monobromoisophakellin, a new bromopyrrole alkaloid from the Caribbean sponge Agelas sp

A detailed analysis of the chemical constituents of a Caribbean specimen of Agelas sp. was carried out. Four brominated compounds (1-4) were isolated and one of them was identified as a new bromopyrrole metabolite, monobromoisophakellin (1). The structure of 1 was determined using spectroscopic methods. All compounds were tested for their antifeedant activity against the Caribbean reef fish Thalassoma bifasciatum in an aquarium assay.

Atmospheric lead and bromine in Germany: post-abatement levels, variabilities and trends

INTENTION, GOAL, SCOPE, BACKGROUND

Abatement measures since the 1970s have depleted lead and bromine levels in the atmosphere over large parts of Europe. Our knowledge of the atmospheric cycling of these elements while a several decade-long period of intensive mobilization reaches its end is incomplete.

OBJECTIVE

We have characterized the trends in the atmospheric levels of Pb and Br and present-day temporal and spatial variabilities.

METHODS

This was achieved by short-term (weeks) and long-term (years) measurements of particulate Pb and Br at various sites in Germany. Samples of atmospheric particulate matter were collected on filter membranes and analyzed by x-ray fluorescence.

RESULTS AND DISCUSSION

Average Pb levels at rural and urban inland sites did not exceed concentrations in background aerosols, sampled at a Baltic Sea coastal site, by more than a factor of 3. Due to sea salt, bromide inland particulate Br levels are below those at a coastal site. There, non-sea salt Br, however, is significant as well. Urban Pb and Br levels are not necessarily higher than rural levels. The concentration levels have decreased in such a way that the previously common source, local vehicular traffic emissions, is no longer predominant. Regional rather than local sources have been increasingly determining the concentrations since the 1990s. This is more pronounced for Br than for Pb. We found indications for coal burning and long-range transport as significant Pb sources. For particulate Pb species, a range of ages (elapsed time since Pb emission) has been found. This range shows two maxima corresponding to characteristic times of 72 and 24 h.

CONCLUSIONS

The (mean) atmospheric residence time of particulate Pb is longer than the residence time of Br, in particular in the wintertime. The chemical species contributing to atmospheric Pb should be addressed in future studies.

RECOMMENDATION AND OUTLOOK

Clearly, despite effective abatement measures, atmospheric Pb will continue to be dominated by anthropogenic mobilization. The influence from long-range transport can be expected to decrease with the effectiveness of abatement programmes in neighbouring countries of the region.

Bromosceptrin, an alkaloid from the marine sponge Agelas conifera

Six dimeric bromopyrrole alkaloids (1-6) were isolated from a Florida Keys specimen of Agelas conifera. One of the constituents was identified as a new bromopyrrole metabolite, bromosceptrin (1). The structure of 1 was established from MS spectrometry and 1D and 2D NMR spectrocopy.

Variations of elemental distribution in brain regions of neonatal rats at different iodine intakes

Iodine deficiency (ID) can result in irreversible damage to the brain during the fetal and neonatal stages. As the active center of many enzymes, trace elements play essential roles in brain function. In this work, the relative contents and distributions of elements (Cl, Br, Fe, Cu, and Zn) in two important brain regions, the cerebral cortex and hippocampus, of the iodine-deficient model rats were determined by the synchrotron radiation X-ray fluorescence (SRXRF) method. Meanwhile, the ID rats were supplemented with adequate and excessive iodine, respectively. The results indicated that the distributions of trace elements could be influenced by the different iodine intakes in the stage of brain development. In contrast to the control group, the contents of Cl, Br, and Zn in two brain regions showed a significant increase in the ID group; however, both Fe and Cu decreased in the cerebral cortex and increased in the hippocampus in the ID group. In addition, only slight changes of elemental contents in brain were found between the adequate and excessive iodine-supplemented rats.

Determination of phenol and resorcinol using 1,3-dibromo-5,5-dimethylhydantoin (DBH) analogous to the Koppeschaar reaction. Analytical methods of pharmacopoeias with DBH in respect to environmental and economical concern, Part 6

PH. EUR. 1997 determines phenol and resorcinol according to the Koppeschaar reaction using hepatotoxic and environmentally hazardous chloroform. Chlorinated hydrocarbons are not required when applying 1,3-dibromo-5,5-dimethylhydantoin (DBH). The reaction time for phenol can be reduced from 45 to 5 min. Blind values according to PH. EUR. 1997 result a systematic error of about -1.8%.

Bromine and iodine in 1997 UK total diet study samples

Concentrations of bromine and iodine were analysed in samples from the 1997 UK Total Diet Study (TDS) using ICP-MS. The data has been used to estimate dietary exposures of UK consumers to these elements from the typical UK diet. Samples for the 20 TDS food groups were obtained from 20 towns in the UK in 1997 and analysed in 1998/99 for total bromine and total iodine concentrations. These samples were also analysed for 12 other elements. The UK regulatory authority had considered iodine recently, but had not considered bromine before. This survey provides up-to-data baseline data for those two elements. Iodine concentrations are similar to those found in recent surveys. Levels of bromine were consistent with previous data where available. Dietary exposures to bromine and iodine were calculated to see if there were any risks to health from the levels of these elements found in the UK diet. The estimated population average exposure to iodine was 0.25 mg d-1, which is within the range of previous estimates (1995, 0.21 mg d-1; 1991, 0.17 mg d-1; 1985, 0.28 mg d-1). The estimated population average exposure to bromine was 3.6 mg d-1.

Collaborative study to improve the quality control of trace element determinations in polymers. Part 2. Certification of polyethylene reference materials (CRMs 680 and 681) for As, Br, Cd, Cl, Cr, Hg, Pb, and S content

Two polymer (polyethylene) reference materials have been produced in support of EC Directive 94/62/EC on plastic packaging and packaging material. The paper describes the preparation of the materials, the analytical work performed to characterize their homogeneity and stability, and the certification of the materials for a range of elements. The technical and statistical evaluation of the results are also summarized.

Simplified analysis of contaminant rejection during ground- and surface water nanofiltration under the information collection rule

A simple, closed-form analytical expression based on the homogenous solution diffusion model is derived for contaminant removal during nanofiltration (NF) of ground and surface water. Solute permeation and back-diffusion coefficients were used as fitting parameters to model rejection characteristics of four thin-film composite NF membranes under conditions typical of drinking water NF. Nonlinear fits of the model to experimental data suggests that the United States Environmental Protection Agency's (USEPA)'s Information Collection Rule protocol for bench-scale studies could be improved to obtain greater precision of the mass transfer coefficients. The model was found to fit rejection data for several water treatment contaminants including total organic carbon, precursors to total organic halide, four trihalomethanes and nine haloacetic acids containing chlorine and bromine, calcium and total hardness, alkalinity and conductivity. The simplified approach to mass transfer calculations from multisolute systems suggests that feed water recovery has a stronger influence on contaminant rejection than permeate flux. Evidence for coupled transport of divalent inorganic ions is also presented. Even though the model developed does not account for ion coupling and cannot be applied in a purely predictive mode, it can assist in the better design and interpretation of data obtained from site-specific pilot-scale water treatment NF studies conducted in support of plant design.

Determination of specific radioactivity for (76)Br-labeled compounds measuring the ratio between (76)Br and (79)Br using packed capillary liquid chromatography mass spectrometry

Packed capillary liquid chromatography with electrospray mass spectrometry was used for direct determination of the specific radioactivity by calculation of isotope ratios between the (76)Br- and (79)Br-labeled analogues of N-((3-aminomethyl)benzyl)-4-bromobenzamide. Using 20 microL injections on packed capillary columns, sufficient mass sensitivity was attained for the determination on an injected amount of radioactivity corresponding to approximately 2 MBq (0.3 pmol of the (76)Br isotopic analogue).

Matemone, a new bioactive bromine-containing oxindole alkaloid from the indian ocean sponge Iotrochota purpurea

A new bioactive bromine-containing oxindole alkaloid, matemone (1), was isolated from the Indian Ocean sponge Iotrochota purpurea, together with the known 6-bromoindole-3-carbaldehyde. The structures were elucidated on the basis of spectral and chemical data. Compound 1 shows mild cytotoxicity against three cancer cell lines and marginal antibacterial activity against Staphyloccocus aureus. DNA intercalant screening demonstrated DNA interactions with 1. Both compounds inhibit division of sea-urchin eggs.

Indirect amperometric detection of underivatized amino acids in microcolumn liquid chromatography with carbon film based ring-disk electrodes

An indirect amperometric detection of underivatized amino acids has been developed using a carbon film based ring-disk electrode (CFBRDE) in microcolumn liquid chromatography (LC). Bromide present in the mobile phase could be efficiently oxidized to bromine at the upstream (disk) electrode, and was subsequently detected at the downstream (ring) electrode. Most of the underivatized amino acids that are electroinactive under conventional amperometric conditions react rapidly with the electrogenerated bromine, the concentration of amino acids can therefore be indirectly determined by continuously monitoring the reduction current of bromine. The signal monitored at the downstream electrode was largely dependent on the bromide concentration in the mobile phase. Under optimized conditions, the response linearly increased with the concentration for most of the amino acids over a concentration range of 1-100 microM, with a correlation coefficient of 0.990-0.993. The detection limits for most of the amino acids were below 1 microM (0.2 pmol). It was demonstrated that detection with a ring-disk electrode offers the advantages of achieving a much higher collection efficiency caused by a decrease in flow rate in the microcolumn LC.