Regulating Schwann cells growth by chitosan micropatterning for peripheral nerve regeneration in vitro

To address the effect of chitosan micropatterning on nerve regeneration, two sizes of parallel microstripes of chitosan are fabricated on the surface of coverslips using a micromodeling method. The morphology of the prepared polydimethylsiloxane stamps and chitosan micropatterning is observed by scanning electron microscopy and the wettability of the prepared micropatterning is evaluated using water contact-angle measurements. Schwann cell (SC) culture is used to evaluate the effect of chitosan micropatterning on cell behavior. The results show that the stripe-like chitosan micropatterning can be successfully fabricated on coverslip surfaces. SCs on 30/30 μm chitosan micropatterning shows the most obvious cell orientation. Moreover, the secretion of nerve growth factor by SCs indicate that the chitosan micropatterning has no negative influence on the normal physiological function of the cells. Thus, the study suggests that chitosan micropatterning can induce and regulate the growth of SCs well, which may have potential application in peripheral nerve regeneration.

Dynamics of filopodium-like protrusion and endothelial cellular motility on one-dimensional extracellular matrix fibrils

Endothelial filopodia play key roles in guiding the tubular sprouting during angiogenesis. However, their dynamic morphological characteristics, with the associated implications in cell motility, have been subjected to limited investigations. In this work, the interaction between endothelial cells and extracellular matrix fibrils was recapitulated in vitro, where a specific focus was paid to derive the key morphological parameters to define the dynamics of filopodium-like protrusion during cell motility. Based on one-dimensional gelatin fibrils patterned by near-field electrospinning (NFES), we study the response of endothelial cells (EA.hy926) under normal culture or ROCK inhibition. It is shown that the behaviour of temporal protrusion length versus cell motility can be divided into distinct modes. Persistent migration was found to be one of the modes which permitted cell displacement for over 300 µm at a speed of approximately 1 µm min(-1). ROCK inhibition resulted in abnormally long protrusions and diminished the persistent migration, but dramatically increased the speeds of protrusion extension and retraction. Finally, we also report the breakage of protrusion during cell motility, and examine its phenotypic behaviours.

Film-based Implants for Supporting Neuron-Electrode Integrated Interfaces for The Brain

Neural engineering provides promise for cell therapy by integrating the host brain with brain-machine-interface technologies in order to externally modulate functions. Long-term interfaces with the host brain remain a critical challenge due to insufficient graft cell survivability and loss of brain electrode sensitivity over time. Here, integrated neuron-electrode interfaces were developed on thin flexible and transparent silk films as brain implants. Mechanical properties and surface topography of silk films were optimized to promote cell survival and alignment of primary rat cortical cells. Compartmentalized cultures of living neural circuit and co-patterned electrode arrays were incorporated on the silk films with built-in wire connections. Electrical stimulation via electrodes embedded in the films activated surrounding neurons evoked calcium responses. In mice brains the silk film implants showed conformal contact capable of modulating host brain cells with minimal inflammatory response and stable indwelling for weeks. The approach of combining cell therapy and brain electrodes could provide sustained functional brain-machine interfaces with ex vivo control of neuron-electrode interface with spatial and temporal precision.

Alignment of Carbon Nanotubes: An Approach to Modulate Cell Orientation and Asymmetry

Stem cells offer a promising tool in tissue engineering strategies, as their differentiated derivatives can be used to reconstruct most biological tissues. These approaches rely on controlling the biophysical cues that tune the ultimate fate of cells. In this context, significant effort has gone to parse out the role of conflicting matrix-elicited signals (e.g., topography and elasticity) in regulation of macroscopic characteristics of cells (e.g., shape and polarity). A critical hurdle, however, lies in our inability to recapitulate the nanoscale spatiotemporal pattern of these signals. The study presented in this manuscript took an initial step to overcome this challenge by developing a carbon nanotube (CNT)-based substrate for nanoresolution control of focal adhesion formation and cell alignment. The utility of this system was studied using human umbilical vascular endothelial cells (HUVECs) and human embryonic stem cells (hESCs) at a single cell level. Our results demonstrated the ability to control cell orientation by merely controlling the alignment of focal adhesions at a nanoscale size. Our long-term vision is to use these nanoengineered substrates to mimic cell orientation in earlier development and explore the role of polarity in asymmetric division and lineage specification of dividing cells.

Site-specific differentiation of neural stem cell regulated by micropatterned multicomponent interfaces

Stem cell microenvironments are enriched by signals from a variety of components, which cooperate spatially and temporally to regulate cellular function. In vitro recapitulating such complexity in a well-controlled manner is elusive. Here, a platform for patterning multiple bio-active proteins on a single substrate is developed and optimized, and is used it to study the cooperative involvement of cell-matrix interaction and cell-cell signaling in regulating neural stem cell (NSC) function. An affinity-capturing-based multi-step microcontact printing is used to pattern, extracellular matrix proteins, and cell-cell signaling ligands, as intersecting lines on a nonadhesive background. Such design provides spatial segregation of signals from different extrinsic components, while allowing cell traffic between them during their proliferation and differentiation processes. Rat embryonic neural stem cells are cultured and characterized on the multicomponent substrates patterned with different combinations of fibronectin, N-cadherin, and Jagged1 proteins and allow to proliferate and differentiate over long term. It is found that local presentation of Notch signaling ligand (Jagged1) or cell adhesion molecule (N-cadherin) effectively modulate the balance between cell-cell and cell-matrix interaction, and significantly change the overall spatial remodeling of NSC differentiation. This platform provides an unambiguous approach to study the spatial and temporal cooperative involvement of different extrinsic components in regulating stem cell behavior. It is also readily expandable for inclusion of extra components and applicable to use with other types of cells, which provide a powerful tool for basic study of cell-material interaction or advanced tissue-interface engineering.

Quantifying electrical interactions between cardiomyocytes and other cells in micropatterned cell pairs

Micropatterning is a powerful technique to control cell shape and position on a culture substrate. In this chapter, we describe the method to reproducibly create large numbers of micropatterned heterotypic cell pairs with defined size, shape, and length of cell-cell contact. These cell pairs can be utilized in patch clamp recordings to quantify electrical interactions between cardiomyocytes and non-cardiomyocytes.

Single-step laser-based fabrication and patterning of cell-encapsulated alginate microbeads

Alginate can be used to encapsulate mammalian cells and for the slow release of small molecules. Packaging alginate as microbead structures allows customizable delivery for tissue engineering, drug release, or contrast agents for imaging. However, state-of-the-art microbead fabrication has a limited range in achievable bead sizes, and poor control over bead placement, which may be desired to localize cellular signaling or delivery. Herein, we present a novel, laser-based method for single-step fabrication and precise planar placement of alginate microbeads. Our results show that bead size is controllable within 8%, and fabricated microbeads can remain immobilized within 2% of their target placement. Demonstration of this technique using human breast cancer cells shows that cells encapsulated within these microbeads survive at a rate of 89.6%, decreasing to 84.3% after five days in culture. Infusing rhodamine dye into microbeads prior to fluorescent microscopy shows their 3D spheroidal geometry and the ability to sequester small molecules. Microbead fabrication and patterning is compatible with conventional cellular transfer and patterning by laser direct-write, allowing location-based cellular studies. While this method can also be used to fabricate microbeads en masse for collection, the greatest value to tissue engineering and drug delivery studies and applications lies in the pattern registry of printed microbeads.

Micropatterned co-culture of hepatocyte spheroids layered on non-parenchymal cells to understand heterotypic cellular interactions

Microfabrication and micropatterning techniques in tissue engineering offer great potential for creating and controlling cellular microenvironments including cell-matrix interactions, soluble stimuli and cell-cell interactions. Here, we present a novel approach to generate layered patterning of hepatocyte spheroids on micropatterned non-parenchymal feeder cells using microfabricated poly(ethylene glycol) (PEG) hydrogels. Micropatterned PEG-hydrogel-treated substrates with two-dimensional arrays of gelatin circular domains (ϕ = 100 μm) were prepared by photolithographic method. Only on the critical structure of PEG hydrogel with perfect protein rejection, hepatocytes were co-cultured with non-parenchymal cells to be led to enhanced hepatocyte functions. Then, we investigated the mechanism of the functional enhancement in co-culture with respect to the contributions of soluble factors and direct cell-cell interactions. In particular, to elucidate the influence of soluble factors on hepatocyte function, hepatocyte spheroids underlaid with fibroblasts (NIH/3T3 mouse fibroblasts) or endothelial cells (BAECs: bovine aortic endothelial cells) were compared with physically separated co-culture of hepatocyte monospheroids with NIH3T3 or BAEC using trans-well culture systems. Our results suggested that direct heterotypic cell-to-cell contact and soluble factors, both of these between hepatocytes and fibroblasts, significantly enhanced hepatocyte functions. In contrast, direct heterotypic cell-to-cell contact between hepatocytes and endothelial cells only contributed to enhance hepatocyte functions. This patterning technique can be a useful experimental tool for applications in basic science, drug screening and tissue engineering, as well as in the design of artificial liver devices.

Precise patterning of silk microstructures using photolithography

Photolithography is used in conjunction with a "silk fibroin photoresist" to form precise protein microstructures directly and rapidly on a variety of substrates. High-resolution features in two and three dimensions with line widths down to one micrometer are formed. Photo-crosslinked protein structures guide cell adhesion, providing precise spatial control of cells without requiring adhesive ligands.

Array of solid-state dye-sensitized solar cells with micropatterned TiO2 nanoparticles for a high-voltage power source

We demonstrate an array of solid-state dye-sensitized solar cells (SS-DSSCs) for a high-voltage power source based on micropatterned titanium dioxide nanoparticles (TNPs) as photoanodes connected in series. The underlying concept of patterning the TNP of a few micrometers thick lies on the combination of the lift-off process of transfer-printed patterns of a sacrificial layer and the soft-cure treatment of the TNP for fixation. This sacrificial layer approach allows for high pattern fidelity and stability, and it enables to construct stable, micrometer-thick, and contamination-free TNP patterns for developing the SS-DSSC array for miniature high-voltage applications. The array of 20 SS-DSSCs integrated in series is found to show a voltage output of around 7 V.

Controlled cell adhesion on poly(dopamine) interfaces photopatterned with non-fouling brushes

Bioinspired poly(dopamine) (PDA) films are merged with antifouling poly(MeOEGMA) brushes utilizing a nitrile imine-mediated tetrazole-ene cycloaddition (NITEC)-based phototriggered surface encoding protocol. The antifouling brushes were photopatterned on PDA surfaces, leading cells to form confluent layers in the non-irradiated sections, while no adhesion occurred on the brushes resulting in a remarkably precise cell pattern. The presented strategy paves the way for the design of tailor-made patterned cell interfaces.

Dynamic three-dimensional micropatterned cell co-cultures within photocurable and chemically degradable hydrogels

In this paper we report on the development of dynamically controlled three-dimensional (3D) micropatterned cellular co-cultures within photocurable and chemically degradable hydrogels. Specifically, we generated dynamic co-cultures of micropatterned murine embryonic stem (mES) cells with human hepatocellular carcinoma (HepG2) cells within 3D hydrogels. HepG2 cells were used due to their ability to direct the differentiation of mES cells through secreted paracrine factors. To generate dynamic co-cultures, mES cells were first encapsulated within micropatterned photocurable poly(ethylene glycol) (PEG) hydrogels. These micropatterned cell-laden PEG hydrogels were subsequently surrounded by calcium alginate (Ca-Alg) hydrogels containing HepG2 cells. After 4 days, the co-culture step was halted by exposing the system to sodium citrate solution, which removed the alginate gels and the encapsulated HepG2 cells. The encapsulated mES cells were then maintained in the resulting cultures for 16 days and cardiac differentiation was analysed. We observed that the mES cells that were exposed to HepG2 cells in the co-cultures generated cells with higher expression of cardiac genes and proteins, as well as increased spontaneous beating. Due to its ability to control the 3D microenvironment of cells in a spatially and temporally regulated manner, the method presented in this study is useful for a range of cell-culture applications related to tissue engineering and regenerative medicine. Copyright © 2013 John Wiley & Sons, Ltd.

Interdigitated multicolored bioink micropatterns by multiplexed polymer pen lithography

Multiplexing, i.e., the application and integration of more than one ink in an interdigitated microscale pattern, is still a challenge for microcontact printing (μCP) and similar techniques. On the other hand there is a strong demand for interdigitated patterns of more than one protein on subcellular to cellular length scales in the lower micrometer range in biological experiments. Here, a new integrative approach is presented for the fabrication of bioactive microarrays and complex multi-ink patterns by polymer pen lithography (PPL). By taking advantage of the strength of microcontact printing (μCP) combined with the spatial control and capability of precise repetition of PPL in an innovative way, a new inking and writing strategy is introduced for PPL that enables true multiplexing within each repetitive subpattern. Furthermore, a specific ink/substrate platform is demonstrated that can be used to immobilize functional proteins and other bioactive compounds over a biotin-streptavidin approach. This patterning strategy aims specifically at application by cell biologists and biochemists addressing a wide range of relevant pattern sizes, easy pattern generation and adjustment, the use of only biofriendly, nontoxic chemicals, and mild processing conditions during the patterning steps. The retained bioactivity of the fabricated cm(2) area filling multiprotein patterns is demonstrated by showing the interaction of fibroblasts and neurons with multiplexed structures of fibronectin and laminin or laminin and ephrin, respectively.

Regulation of Stem Cell Fate in a Three-Dimensional Micropatterned Dual-Crosslinked Hydrogel System

Micropatterning technology is a powerful tool for controlling the cellular microenvironment and investigating the effects of physical parameters on cell behaviors, such as migration, proliferation, apoptosis, and differentiation. Although there have been significant developments in regulating the spatial and temporal distribution of physical properties in various materials, little is known about the role of the size of micropatterned regions of hydrogels with different crosslinking densities on the response of encapsulated cells. In this study, novel alginate hydrogel system is engineered that can be micropatterned three-dimensionally to create regions that are crosslinked by a single mechanism or dual mechanisms. By manipulating micropattern size while keeping the overall ratio of single- to dual-crosslinked hydrogel volume constant, the physical properties of the micropatterned alginate hydrogels are spatially tunable. When human adipose-derived stem cells (hASCs) are photoencapsulated within micropatterned hydrogels, their proliferation rate is a function of micropattern size. Additionally, micropattern size dictates the extent of osteogenic and chondrogenic differentiation of photoencapsulated hASC. The size of 3D micropatterned physical properties in this new hydrogel system introduces a new design parameter for regulating various cellular behaviors, and this dual-crosslinked hydrogel system provides a new platform for studying proliferation and differentiation of stem cells in a spatially controlled manner for tissue engineering and regenerative medicine applications.

Rate control of cell sheet recovery by incorporating hydrophilic pattern in thermoresponsive cell culture dish

Thready stripe-polyacrylamide (PAAm) pattern was fabricated on a thermoresponsive poly(N-isopropylacrylamide) (PIPAAm) surface, and their surface properties were characterized. A PIPAAm surface spin-coated with positive photoresist was irradiated through a 5 µm/5 µm or a 10 µm/10-µm black and white striped photomask, resulting in the radical polymerization of AAm on the photoirradiated area. After staining with Alexa488 bovine serum albumin, the stripe-patterned surface was clearly observed and the patterned surface was also observed by a phase contrast image of an atomic force microscope. NIH-3T3 (3T3) single cells were able to be cultured at 37°C on the patterned surfaces as well as on a PIPAAm surface without pattern, and the detachment of adhered cells was more rapidly from the patterned surface after reducing temperature. Furthermore, the rate of detachment of 3T3 confluent cell sheet on the patterned surface was accelerated, compared with on a conventional PIPAAm surface under the static condition. The rate control of cell sheet recovery should contribute the preservations of cell phenotype and biological functions of cell sheet for applying to clinical trials.

Contact inhibition of locomotion probabilities drive solitary versus collective cell migration

Contact inhibition of locomotion (CIL) is the process whereby cells collide, cease migrating in the direction of the collision, and repolarize their migration machinery away from the collision. Quantitative analysis of CIL has remained elusive because cell-to-cell collisions are infrequent in traditional cell culture. Moreover, whereas CIL predicts mutual cell repulsion and 'scattering' of cells, the same cells in vivo are observed to undergo CIL at some developmental times and collective cell migration at others. It remains unclear whether CIL is simply absent during collective cell migration, or if the two processes coexist and are perhaps even related. Here, we used micropatterned stripes of extracellular matrix to restrict cell migration to linear paths such that cells polarized in one of two directions and collisions between cells occurred frequently and consistently, permitting quantitative and unbiased analysis of CIL. Observing repolarization events in different contexts, including head-to-head collision, head-to-tail collision, collision with an inert barrier, or no collision, and describing polarization as a two-state transition indicated that CIL occurs probabilistically, and most strongly upon head-to-head collisions. In addition to strong CIL, we also observed 'trains' of cells moving collectively with high persistence that appeared to emerge from single cells. To reconcile these seemingly conflicting observations of CIL and collective cell migration, we constructed an agent-based model to simulate our experiments. Our model quantitatively predicted the emergence of collective migration, and demonstrated the sensitivity of such emergence to the probability of CIL. Thus CIL and collective migration can coexist, and in fact a shift in CIL probabilities may underlie transitions between solitary cell migration and collective cell migration. Taken together, our data demonstrate the emergence of persistently polarized, collective cell movement arising from CIL between colliding cells.

Wafer-scale patterning of reduced graphene oxide electrodes by transfer-and-reverse stamping for high performance OFETs

A wafer-scale patterning method for solution-processed graphene electrodes, named the transfer-and-reverse stamping method, is universally applicable for fabricating source/drain electrodes of n- and p-type organic field-effect transistors with excellent performance. The patterning method begins with transferring a highly uniform reduced graphene oxide thin film, which is pre-prepared on a glass substrate, onto hydrophobic silanized (rigid/flexible) substrates. Patterns of the as-prepared reduced graphene oxide films are then formed by modulating the surface energy of the films and selectively delaminating the films using an oxygen-plasma-treated elastomeric stamp with patterns. Reduced graphene oxide patterns with various sizes and shapes can be readily formed onto an entire wafer. Also, they can serve as the source/drain electrodes for benchmark n- and p-type organic field-effect transistors with enhanced performance, compared to those using conventional metal electrodes. These results demonstrate the general utility of this technique. Furthermore, this simple, inexpensive, and scalable electrode-patterning-technique leads to assembling organic complementary circuits onto a flexible substrate successfully.

Large-scale fabrication of free-standing, micropatterned silica nanotubes via a hybrid hydrogel-templated route

Free-standing, micropatterned silica nanotube membranes are in situ fabricated using a micropatterned silica-coated collagen hybrid hydrogel as template. They are substrate-free, and not only maintained their micropatterned microstructure well, but also exhibited strong cell contact guidance ability to direct cell alignment and differentiation, indicating their good potential for biomedical applications.

Bio-origami hydrogel scaffolds composed of photocrosslinked PEG bilayers

We describe the self-folding of photopatterned poly (ethylene glycol) (PEG)-based hydrogel bilayers into curved and anatomically relevant micrometer-scale geometries. The PEG bilayers consist of two different molecular weights (MWs) and are photocrosslinked en masse using conventional photolithography. Self-folding is driven by differential swelling of the two PEG bilayers in aqueous solutions. We characterize the self-folding of PEG bilayers of varying composition and develop a finite element model which predicts radii of curvature that are in good agreement with empirical results. Since we envision the utility of bio-origami in tissue engineering, we photoencapsulate insulin secreting β-TC-6 cells within PEG bilayers and subsequently self-fold them into cylindrical hydrogels of different radii. Calcein AM staining and ELISA measurements are used to monitor cell proliferation and insulin production respectively, and the results indicate cell viability and robust insulin production for over eight weeks in culture.

Morphological restriction of human coronary artery endothelial cells substantially impacts global gene expression patterns

Alterations in cell shape have been shown to modulate chromatin condensation and cell lineage specification; however, the mechanisms controlling these processes are largely unknown. Because endothelial cells experience cyclic mechanical changes from blood flow during normal physiological processes and disrupted mechanical changes as a result of abnormal blood flow, cell shape deformation and loss of polarization during coronary artery disease, we aimed to determine how morphological restriction affects global gene expression patterns. Human coronary artery endothelial cells (HCAECs) were cultured on spatially defined adhesive micropatterns, forcing them to conform to unique cellular morphologies differing in cellular polarization and angularity. We utilized pattern recognition algorithms and statistical analysis to validate the cytoskeletal pattern reproducibility and uniqueness of each micropattern, and performed microarray analysis on normal-shaped and micropatterned HCAECs to determine how constrained cellular morphology affects gene expression patterns. Analysis of the data revealed that forcing HCAECs to conform to geometrically-defined shapes significantly affects their global transcription patterns compared to nonrestricted shapes. Interestingly, gene expression patterns were altered in response to morphological restriction in general, although they were consistent regardless of the particular shape the cells conformed to. These data suggest that the ability of HCAECs to spread, although not necessarily their particular morphology, dictates their genomics patterns.

Development of 3D hydrogel culture systems with on-demand cell separation

Recently there has been an increased interest in the effects of paracrine signaling between groups of cells, particularly in the context of better understanding how stem cells contribute to tissue repair. Most current 3D co-culture methods lack the ability to effectively separate two cell populations after the culture period, which is important for simultaneously analyzing the reciprocal effects of each cell type on the other. Here, we detail the development of a 3D hydrogel co-culture system that allows us to culture different cell types for up to 7 days and subsequently separate and isolate the different cell populations using enzyme-sensitive glues. Separable 3D co-culture laminates were prepared by laminating PEG-based hydrogels with enzyme-degradable hydrogel adhesives. Encapsulated cell populations exhibited good segregation with well-defined interfaces. Furthermore, constructs can be separated on-demand upon addition of the appropriate enzyme, while cell viability remains high throughout the culture period, even after laminate separation. This platform offers great potential for a variety of basic cell signaling studies as the incorporation of an enzyme-sensitive adhesive interface allows the on-demand separation of individual cell populations for immediate analysis or further culture to examine persistence of co-culture effects and paracrine signaling on cell populations.

The effect of microgrooved culture substrates on calcium cycling of cardiac myocytes derived from human induced pluripotent stem cells

Induced pluripotent stem cell-derived cardiomyocytes (iPSC-CM) have been widely proposed as in vitro models of myocardial physiology and disease. A significant obstacle, however, is their immature phenotype. We hypothesised that Ca(2+) cycling of iPSC-CM is influenced by culture conditions and can be manipulated to obtain a more mature cellular behaviour. To test this hypothesis we seeded iPSC-CM onto fibronectin coated microgrooved polydimethylsiloxane (PDMS) scaffolds fabricated using photolithography, or onto unstructured PDMS membrane. After two weeks in culture, the structure and function of iPSC-CM were studied. PDMS microgrooved culture substrates brought about cellular alignment (p < 0.0001) and more organised sarcomere. The Ca(2+) cycling properties of iPSC-CM cultured on these substrates were significantly altered with a shorter time to peak amplitude (p = 0.0002 at 1 Hz), and more organised sarcoplasmic reticulum (SR) Ca(2+) release in response to caffeine (p < 0.0001), suggesting improved SR Ca(2+) cycling. These changes were not associated with modifications in gene expression. Whilst structured tissue culture may make iPSC-CM more representative of adult myocardium, further construct development and characterisation is required to optimise iPSC-CM as a model of adult myocardium.

Microfabricated collagen tracks facilitate single cell metastatic invasion in 3D

While the mechanisms employed by metastatic cancer cells to migrate remain poorly understood, it has been widely accepted that metastatic cancer cells can invade the tumor stroma by degrading the extracellular matrix (ECM) with matrix metalloproteinases (MMPs). Although MMP inhibitors showed early promise in preventing metastasis in animal models, they have largely failed clinically. Recently, studies have shown that some cancer cells can use proteolysis to mechanically rearrange their ECM to form tube-like "microtracks" which other cells can follow without using MMPs themselves. We speculate that this mode of migration in the secondary cells may be one example of migration which can occur without endogenous protease activity in the secondary cells. Here we present a technique to study this migration in a 3D, collagen-based environment which mimics the size and topography of the tracks produced by proteolytically active cancer cells. Using time-lapse phase-contrast microscopy, we find that these microtracks permit the rapid and persistent migration of noninvasive MCF10A mammary epithelial cells, which are unable to otherwise migrate in 3D collagen. Additionally, while highly metastatic MDAMB231 breast cancer cells are able to invade a 3D collagen matrix, seeding within the patterned microtracks induced significantly increased cell migration speed, which was not decreased by pharmacological MMP inhibition. Together, these data suggest that microtracks within a 3D ECM may facilitate the migration of cells in an MMP-independent fashion, and may reveal novel insight into the clinical challenges facing MMP inhibitors.

Micro- and nanoscale engineering of cell signaling

It is increasingly recognized that cell signaling, as a chemical process, must be considered at the local, micrometer scale. Micro- and nanofabrication techniques provide access to these dimensions, with the potential to capture and manipulate the spatial complexity of intracellular signaling in experimental models. This review focuses on recent advances in adapting surface engineering for use with biomolecular systems that interface with cell signaling, particularly with respect to surfaces that interact with multiple receptor systems on individual cells. The utility of this conceptual and experimental approach is demonstrated in the context of epithelial cells and T lymphocytes, two systems whose ability to perform their physiological function is dramatically impacted by the convergence and balance of multiple signaling pathways.