Effects of neighboring sulfides and pH on ester hydrolysis in thiol-acrylate photopolymers

Synthesis and Solvent Free DLP 3D Printing of Degradable Poly(Allyl Glycidyl Ether Succinate)

Digital light processing (DLP) printing forms solid constructs from fluidic resins by photochemically crosslinking polymeric resins with reactive functional groups. DLP is used widely due to its efficient, high-resolution printing, but its use and translational potential has been limited in some applications as state-of-the-art resins experience unpredictable and anisotropic part shrinkage due to the use of solvent needed to reduce resin viscosity and layer dependent crosslinking. Herein, poly(allyl glycidyl ether succinate) (PAGES), a low viscosity, degradable polyester, was synthesized by ring opening copolymerization and used in combination with degradable thiol crosslinkers to afford a solvent free resin that can be utilized in DLP printing. Varying resin formulations of PAGES polymer are shown to decrease part shrinkage from 14 % to 0.3 %. Photochemically printed parts fabricated from PAGES possess tensile moduli between 0.43 and 6.18 MPa and degradation profiles are shown to vary between 12 and 40 days under accelerated conditions based on degree of polymerization and crosslink ratio.

Granular Hydrogels for Harnessing the Immune Response

This review aims to understand the current progress in immune-instructive granular hydrogels and identify the key features used as immunomodulatory strategies. Published work is systematically reviewed and relevant information about granular hydrogels used throughout these studies is collected. The base polymer, microgel generation technique, polymer crosslinking chemistry, particle size and shape, annealing strategy, granular hydrogel stiffness, pore size and void space, degradability, biomolecule presentation, and drug release are cataloged for each work. Several granular hydrogel parameters used for immune modulation: porosity, architecture, bioactivity, drug release, cell delivery, and modularity, are identified. The authors found in this review that porosity is the most significant factor influencing the innate immune response to granular hydrogels, while incorporated bioactivity is more significant in influencing adaptive immune responses. Here, the authors' findings and summarized results from each section are presented and suggestions are made for future studies to better understand the benefits of using immune-instructive granular hydrogels.

A user's guide to degradation testing of polyethylene glycol-based hydrogels: From in vitro to in vivo studies

Poly(ethylene glycol) (PEG)-based hydrogels have gained significant attention in the field of biomedical applications due to their versatility and antifouling properties. Acrylate-derivatized PEG hydrogels (PEGDA) are some of the most widely studied hydrogels; however, there has been debate around the degradation mechanism and predicting resorption rates. Several factors influence the degradation rate of PEG hydrogels, including backbone and endgroup chemistry, macromer molecular weight, and polymer concentration. In addition to hydrogel parameters, it is necessary to understand the influence of biological and environmental conditions (e.g., pH and temperature) on hydrogel degradation. Rigorous methods for monitoring degradation in both in vitro and in vivo settings are also critical to hydrogel design and development. Herein, we provide guidance on tailoring PEG hydrogel chemistry to achieve target hydrolytic degradation kinetics for both resorbable and biostable applications. A detailed overview of accelerated testing methods and hydrogel degradation characterization is provided to aid researchers in experimental design and interpreting in vitro-in vivo correlations necessary for predicting hydrogel device performance.

Zwitterionic polymer-dexamethasone conjugates penetrate and protect cartilage from inflammation

Improving the pharmacokinetics of intra-articularly injected therapeutics is a major challenge in treating joint disease. Small molecules and biologics are often cleared from the joint within hours, which greatly reduces their therapeutic efficacy. Furthermore, they are often injected at high doses, which can lead to local cytotoxicity and systemic side effects. In this study, we present modular polymer-drug conjugates of zwitterionic poly(carboxybetaine acrylamide) (pCBAA) and the anti-inflammatory glucocorticoid dexamethasone (DEX) to create cartilage-targeted carriers with slow-release kinetics. pCBAA polymers showed excellent cartilage penetration (full thickness in 1 h) and retention (>50 % after 2 weeks of washing). DEX was loaded onto the pCBAA polymer by employing two different DEX-bearing comonomers to produce pCBAA-co-DEX conjugates with different release kinetics. The slow-releasing conjugate showed zero-order release kinetics in PBS over 70 days. The conjugates elicited no oxidative stress on chondrocytes compared to dose-matched free DEX and protected bovine cartilage explants from the inflammatory response after treatment with IL-1β. By combining cartilage targeting and sustained drug release properties, the pCBAA-co-DEX conjugates solve many issues of today's intra-articular therapeutics, which could ultimately enable better long-term clinical outcomes with fewer side effects.

Elucidating the Effect of Amine Charge State on Poly(β-amino ester) Degradation Using Permanently Charged Analogs

With synthetic ease and tunable degradation lifetimes, poly(β-amino ester)s (PBAEs) have found use in increasingly diverse applications, from gene therapy to thermosets. Protonatable amines in each repeating unit impart pH-dependent solution behavior and lifetimes, with acidic conditions favoring solubility, yet slowing hydrolysis. Due in part to these interconnected phenomena governing pH-dependent PBAE degradation, predictive degradation models, which would enable user-defined lifetimes, remain elusive. To separate the effects of charge state and solution pH on PBAE degradation, we synthesized poly(β-quaternary ammonium ester)s (PBQAEs), which differ from their parent PBAEs only by an additional methyl group, generating polymers with pH-independent cationic charge. Like PBAEs, PBQAE hydrolysis accelerates with increasing pH, although at a given pH, PBAE degradation outpaces PBQAE degradation. This difference is more pronounced in basic solutions, suggesting that deprotonated PBAE amines accelerate hydrolysis, providing an additional tuning parameter to PBAE lifetime and informing the degradation of PBAEs and other pH-responsive polymers.

Hydrolytic hydrogels tune mesenchymal stem cell persistence and immunomodulation for enhanced diabetic cutaneous wound healing

Diabetes is associated with an altered global inflammatory state with impaired wound healing. Mesenchymal stem/stromal cells (MSC) are being explored for treatment of diabetic cutaneous wounds due to their regenerative properties. These cells are commonly delivered by injection, but the need to prolong the retention of MSC at sites of injury has spurred the development of biomaterial-based MSC delivery vehicles. However, controlling biomaterial degradation rates in vivo remains a therapeutic-limiting challenge. Here, we utilize hydrolytically degradable ester linkages to engineer synthetic hydrogels with tunable in vivo degradation kinetics for temporally controlled delivery of MSC. In vivo hydrogel degradation rate can be controlled by altering the ratio of ester to amide linkages in the hydrogel macromers. These hydrolytic hydrogels degrade at rates that enable unencumbered cutaneous wound healing, while enhancing the local persistence MSC compared to widely used protease-degradable hydrogels. Furthermore, hydrogel-based delivery of MSC modulates local immune responses and enhances cutaneous wound repair in diabetic mice. This study introduces a simple strategy for engineering tunable degradation modalities into synthetic biomaterials, overcoming a key barrier to their use as cell delivery vehicles.

Thiol-Michael Addition Microparticles: Their Synthesis, Characterization, and Uptake by Macrophages

Polymeric microparticles are promising biomaterial platforms for targeting macrophages in the treatment of disease. This study investigates microparticles formed by a thiol-Michael addition step-growth polymerization reaction with tunable physiochemical properties and their uptake by macrophages. The hexafunctional thiol monomer dipentaerythritol hexa-3-mercaptopropionate (DPHMP) and tetrafunctional acrylate monomer di(trimethylolpropane) tetraacrylate (DTPTA) were reacted in a stepwise dispersion polymerization, achieving tunable monodisperse particles over a size range (1-10 μm) relevant for targeting macrophages. An off-stoichiometry thiol-acrylate reaction afforded facile secondary chemical functionalization to create particles with different chemical moieties. Uptake of the microparticles by RAW 264.7 macrophages was highly dependent on treatment time, particle size, and particle chemistry with amide, carboxyl, and thiol terminal chemistries. The amide-terminated particles were non-inflammatory, while the carboxyl- and thiol-terminated particles induced pro-inflammatory cytokine production in conjunction with particle phagocytosis. Finally, a lung-specific application was explored through time-dependent uptake of amide-terminated particles by human alveolar macrophages in vitro and mouse lungs in vivo without inducing inflammation. The findings demonstrate a promising microparticulate delivery vehicle that is cyto-compatible, is non-inflammatory, and exhibits high rates of uptake by macrophages.

Net anionic poly(β-amino ester)s: synthesis, pH-dependent behavior, and complexation with cationic cargo

As hydrolytically-labile, traditionally-cationic polymers, poly(β-amino ester)s (PBAEs) adeptly complex anionic compounds such as nucleic acids, and release their cargo as the polymer degrades. To engineer fully-degradable polyelectrolyte complexes and delivery vehicles for cationic therapeutics, we sought to invert PBAE net charge to generate net anionic PBAEs. Since PBAEs can carry up to a net charge of +1 per tertiary amine, we synthesized a series of alkyne-functionalized PBAEs that allowed installation of 2 anionic thiol-containing molecules per tertiary amine via a radical thiol-yne reaction. Finding dialysis in aqueous solution to lead to PBAE degradation, we developed a preparative size exclusion chromatography method to remove unreacted thiol from the net anionic PBAEs without triggering hydrolysis. The net anionic PBAEs display non-monotonic solution behavior as a function of pH, being more soluble at pH 4 and 10 than in intermediate pH ranges. Like cationic PBAEs, these net anionic PBAEs degrade in aqueous environments with hydrophobic content-dependent hydrolysis, as determined by 1H NMR spectroscopy. Further, these net anionic PBAEs form complexes with the cationic peptide (GR)10, which disintegrate over time as the polymer hydrolyzes. Together, these studies outline a synthesis and purification route to make previously inaccessible net anionic PBAEs with tunable solution and degradation behavior, allowing for user-determined complexation and release rates and providing opportunities for degradable polyelectrolyte complexes and cationic therapeutic delivery.

A facile method for anti-cancer drug encapsulation into polymersomes with a core-satellite structure

Polymersomes possess the self-assembly vesicular structure similar to liposomes. Although a variety of comparisons between polymersomes and liposomes in the aspects of physical properties, preparation and applications have been elaborated in many studies, few focus on their differences in drug encapsulation, delivery and release in vitro and in vivo. In the present work, we have provided a modified direct hydration method to encapsulate anti-cancer drug paclitaxel (PTX) into PEG-b-PCL constituted polymersomes (PTX@PS). In addition to advantages including narrow particle size distribution, high colloid stability and moderate drug-loading efficiency, we find that the loaded drug aggregate in small clusters and reside through the polymersome membrane, representing a unique core-satellite structure which might facilitate the sustained drug release. Compared with commercial liposomal PTX formulation (Lipusu^®), PTX@PS exhibited superb tumor cell killing ability underlain by multiple pro-apoptotic mechanisms. Moreover, endocytic process of PTX@PS significantly inhibits drug transporter P-gp expression which could be largely activated by free drug diffusion. In glioma mice models, it has also confirmed that PTX@PS remarkably eradicate tumors, which renders polymersomes as a promising alternative to liposomes as drug carriers in clinic.

Factors Controlling Degradation of Biologically Relevant Synthetic Polymers in Solution and Solid State

The field of biodegradable synthetic polymers, which is central for regenerative engineering and drug delivery applications, encompasses a multitude of hydrolytically sensitive macromolecular structures and diverse processing approaches. The ideal degradation behavior for a specific life science application must comply with a set of requirements, which include a clinically relevant kinetic profile, adequate biocompatibility, benign degradation products, and controlled structural evolution. Although significant advances have been made in tailoring materials characteristics to satisfy these requirements, the impacts of autocatalytic reactions and microenvironments are often overlooked resulting in uncontrollable and unpredictable outcomes. Therefore, roles of surface versus bulk erosion, in situ microenvironment, and autocatalytic mechanisms should be understood to enable rational design of degradable systems. In an attempt to individually evaluate the physical state and form factors influencing autocatalytic hydrolysis of degradable polymers, this Review follows a hierarchical analysis that starts with hydrolytic degradation of water-soluble polymers before building up to 2D-like materials, such as ultrathin coatings and capsules, and then to solid-state degradation. We argue that chemical reactivity largely governs solution degradation while diffusivity and geometry control the degradation of bulk materials, with thin "2D" materials remaining largely unexplored. Following this classification, this Review explores techniques to analyze degradation in vitro and in vivo and summarizes recent advances toward understanding degradation behavior for traditional and innovative polymer systems. Finally, we highlight challenges encountered in analytical methodology and standardization of results and provide perspective on the future trends in the development of biodegradable polymers.

Biocompatible, Multi-Mode, Fluorescent, T2 MRI Contrast Magnetoelectric-Silica Nanoparticles (MagSiNs), for On-Demand Doxorubicin Delivery to Metastatic Cancer Cells

There is a need to improve current cancer treatment regimens to reduce systemic toxicity, to positively impact the quality-of-life post-treatment. We hypothesized the negation of off-target toxicity of anthracyclines (e.g., Doxorubicin) by delivering Doxorubicin on magneto-electric silica nanoparticles (Dox-MagSiNs) to cancer cells. Dox-MagSiNs were completely biocompatible with all cell types and are therapeutically inert till the release of Doxorubicin from the MagSiNs at the cancer cells location. The MagSiNs themselves are comprised of biocompatible components with a magnetostrictive cobalt ferrite core (4−6 nm) surrounded by a piezoelectric fused silica shell of 1.5 nm to 2 nm thickness. The MagSiNs possess T2-MRI contrast properties on par with RESOVIST™ due to their cobalt ferrite core. Additionally, the silica shell surrounding the core was volume loaded with green or red fluorophores to fluorescently track the MagSiNs in vitro. This makes the MagSiNs a suitable candidate for trackable, drug nanocarriers. We used metastatic triple-negative breast cancer cells (MDAMB231), ovarian cancer cells (A2780), and prostate cancer cells (PC3) as our model cancer cell lines. Human umbilical vein endothelial cells (HUVEC) were used as control cell lines to represent blood-vessel cells that suffer from the systemic toxicity of Doxorubicin. In the presence of an external magnetic field that is 300× times lower than an MRI field, we successfully nanoporated the cancer cells, then triggered the release of 500 nM of doxorubicin from Dox-MagSiNs to successfully kill >50% PC3, >50% A2780 cells, and killed 125% more MDAMB231 cells than free Dox.HCl. In control HUVECs, the Dox-MagSiNs did not nanoporate into the HUVECS and did not exhibited any cytotoxicity at all when there was no triggered release of Dox.HCl. Currently, the major advantages of our approach are, (i) the MagSiNs are biocompatible in vitro and in vivo; (ii) the label-free nanoporation of Dox-MagSiNs into cancer cells and not the model blood vessel cell line; (iii) the complete cancellation of the cytotoxicity of Doxorubicin in the Dox-MagSiNs form; (iv) the clinical impact of such a nanocarrier will be that it will be possible to increase the current upper limit for cumulative-dosages of anthracyclines through multiple dosing, which in turn will improve the anti-cancer efficacy of anthracyclines.

Hydrolytically Degradable Microgels with Tunable Mechanical Properties Modulate the Host Immune Response

Hydrogel microparticles (microgels) are an attractive approach for therapeutic delivery because of their modularity, injectability, and enhanced integration with the host tissue. Multiple microgel fabrication strategies and chemistries have been implemented, yet manipulation of microgel degradability and its effect on in vivo tissue responses remains underexplored. Here, the authors report a facile method to synthesize microgels crosslinked with ester-containing junctions to afford tunable degradation kinetics. Monodisperse microgels of maleimide-functionalized poly(ethylene-glycol) are generated using droplet microfluidics crosslinked with thiol-terminated, ester-containing molecules. Tunable mechanics are achievable based on the ratio of degradable to nondegradable crosslinkers in the continuous phase. Degradation in an aqueous medium leads to microgel deformation based on swelling and a decrease in elastic modulus. Furthermore, degradation byproducts are cytocompatible and do not cause monocytic cell activation under noninflammatory conditions. These injectable microgels possess time-dependent degradation on the order of weeks in vivo. Lastly, the evaluation of tissue responses in a subcutaneous dorsal pocket shows a dynamic type-1 like immune response to the synthetic microgels, driven by interferon gamma (IFN-γ  ) expression, which can be moderated by tuning the degradation properties. Collectively, this study demonstrates the development of a hydrolytic microgel platform that can be adapted to desired host tissue immune responses.

Additive Manufacturing of Biomaterials-Design Principles and Their Implementation

Additive manufacturing (AM, also known as 3D printing) is an advanced manufacturing technique that has enabled progress in the design and fabrication of customised or patient-specific (meta-)biomaterials and biomedical devices (e.g., implants, prosthetics, and orthotics) with complex internal microstructures and tuneable properties. In the past few decades, several design guidelines have been proposed for creating porous lattice structures, particularly for biomedical applications. Meanwhile, the capabilities of AM to fabricate a wide range of biomaterials, including metals and their alloys, polymers, and ceramics, have been exploited, offering unprecedented benefits to medical professionals and patients alike. In this review article, we provide an overview of the design principles that have been developed and used for the AM of biomaterials as well as those dealing with three major categories of biomaterials, i.e., metals (and their alloys), polymers, and ceramics. The design strategies can be categorised as: library-based design, topology optimisation, bio-inspired design, and meta-biomaterials. Recent developments related to the biomedical applications and fabrication methods of AM aimed at enhancing the quality of final 3D-printed biomaterials and improving their physical, mechanical, and biological characteristics are also highlighted. Finally, examples of 3D-printed biomaterials with tuned properties and functionalities are presented.

3D-printed implantable devices with biodegradable rate-controlling membrane for sustained delivery of hydrophobic drugs

Implantable drug delivery systems offer an alternative for the treatments of long-term conditions (i.e. schizophrenia, HIV, or Parkinson’s disease among many others). The objective of the present work was to formulate implantable devices loaded with the model hydrophobic drug olanzapine (OLZ) using robocasting 3D-printing combined with a pre-formed rate controlling membrane. OLZ was selected as a model molecule due to its hydrophobic nature and because is a good example of a molecule used to treat a chronic condition schizophrenia. The resulting implants consisted of a poly(ethylene oxide) (PEO) implant coated with a poly(caprolactone) (PCL)-based membrane. The implants were loaded with 50 and 80% (w/w) of OLZ. They were prepared using an extrusion-based 3D-printer from aqueous pastes containing 36–38% (w/w) of water. The printing process was carried out at room temperature. The resulting implants were characterized by using infrared spectroscopy, scanning electron microscopy, thermal analysis, and X-ray diffraction. Crystals of OLZ were present in the implant after the printing process. In vitro release studies showed that implants containing 50% and 80% (w/w) of OLZ were capable of providing drug release for up to 190 days. On the other hand, implants containing 80% (w/w) of OLZ presented a slower release kinetics. After 190 days, total drug release was ca. 77% and ca. 64% for implants containing 50% and 80% (w/w) of OLZ, respectively. The higher PEO content within implants containing 50% (w/w) of OLZ allows a faster release as this polymer acts as a co-solvent of the drug.

In situ Forming Hyperbranched PEG-Thiolated Hyaluronic Acid Hydrogels With Honey-Mimetic Antibacterial Properties

The rapidly increasing resistance of bacteria to currently approved antibiotic drugs makes surgical interventions and the treatment of bacterial infections increasingly difficult. In recent years, complementary strategies to classical antibiotic therapy have, therefore, gained importance. One of these strategies is the use of medicinal honey in the treatment of bacterially colonized wounds. One of the several bactericidal effects of honey is based on the in situ generation of hydrogen peroxide through the activity of the enzyme glucose oxidase. The strategy underlying this work is to mimic this antibacterial redox effect of honey in an injectable, biocompatible, and rapidly forming hydrogel. The hydrogel was obtained by thiol–ene click reaction between hyperbranched polyethylene glycol diacrylate (HB PEGDA), synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization, and thiolated hyaluronic acid (HA-SH). After mixing 500 µL HB PEGDA (10%, w/w) and 500 µL HA-SH (1%, w/w) solutions, hydrogels formed in ∼60 s (HB PEGDA/HA-SH 10.0–1.0), as assessed by the tube inverting test. The HB PEGDA/HA-SH 10.0–1.0 hydrogel (200 µL) was resistant to in vitro dissolution in water for at least 64 days, absorbing up to 130 wt% of water. Varying glucose oxidase (GO) amounts (0–500 U/L) and constant glucose content (2.5 wt%) were loaded into HB PEGDA and HA-SH solutions, respectively, before hydrogel formation. Then, the release of H₂O₂ was evaluated through a colorimetric pertitanic acid assay. The GO content of 250 U/L was selected, allowing the formation of 10.8 ± 1.4 mmol H₂O₂/L hydrogel in 24 h, under static conditions. The cytocompatibility of HB PEGDA/HA-SH 10.0–1.0 hydrogels loaded with different GO activities (≤ 500 U/L) at a constant glucose amount (2.5 wt%) was investigated by in vitro assays at 24 h with L929 and HaCaT cell lines, according to DIN EN ISO 10993-5. The tests showed cytocompatibility for GO enzyme activity up to 250 U/L for both cell lines. The antibacterial activity of HB PEGDA/HA-SH 10.0–1.0 hydrogels loaded with increasing amounts of GO was demonstrated against various gram-positive bacteria (S. aureus and S. epidermidis), antibiotic-resistant gram-positive bacteria (MRSA and MRSE), gram-negative bacteria (P. aeruginosa, E. coli, and A. baumanii), and antibiotic-resistant gram-negative strains (P. aeruginosa and E. coli) using agar diffusion tests. For all gram-positive bacterial strains, increasing efficacy was measured with increasing GO activity. For the two P. aeruginosa strains, efficacy was shown only from an enzyme activity of 125 U/L and for E. coli and A. baumanii, efficacy was shown only from 250 U/L enzyme activity. HB PEGDA/HA-SH 10.0–1.0 hydrogels loaded with ≤250 U/L GO and 2.5 wt% glucose are promising formulations due to their fast-forming properties, cytocompatibility, and ability to produce antibacterial H₂O₂, warranting future investigations for bacterial infection treatment, such as wound care.

Bioinspired self-degradable hydrogels towards wound sealing

Inspired by the autolysis of shaggy mane, we developed a self-degradable hydrogel as a medical adhesive for skin wounds. The rapid gelation and self-degradation of the hydrogel were achieved via the Michael addition and subsequent hydrolysis of the addition product. In vivo experiments further showed that the hydrogel adhesive was efficiently applied for skin wound repair.

Controllable multi-phase protein release from in-situ hydrolyzable hydrogel

Using hydrogels to control the long-term release of protein remains challenging, especially for in-situ forming formulations. The uncontrollable burst release in the initial phase, the halted release in the subsequent phase, and the undesired drug dumping at the late stage are some obstacles hydrogel-based depots commonly encounter. In this study, we report hydrolyzable dextran-based hydrogels crosslinked by Michael addition to demonstrate a systematic solution to solve these problems. First, the polymer concentration was used as the critical parameter to control the proportion of releasable versus physically trapped protein molecules in the initial hydrogel meshwork. Subsequently, the dynamic change of the hydrogel meshwork was modulated by the crosslinking density and the cleavage rate of ester linkers. To this end, we designed and synthesized a series of ester linkers with hydrolytic half-life ranging from 4 h to 4 months and incorporate them into the hydrogel. Controlled release was demonstrated for model proteins varied in size, including lysozyme (14 kDa), bovine serum albumin (66 kDa), immunoglobulin G (150 kDa), and bevacizumab (149 kDa). In particular, sustained release of IgG ranging from 10 days to 8 months was achieved. Lastly, a tunable multi-phase release profile was made feasible by incorporating multiple ester linkers into one hydrogel formulation. The linker's half-life determined each phase's release duration, and the linkers' mixing ratio determined the corresponding release fraction. The reported hydrogel design engenders a versatile platform to address the needs for long-term and readily adjustable protein release for biomedical applications.

Heat- and Light-Responsive Materials Through Pairing Dynamic Thiol-Michael and Coumarin Chemistry

Covalent adaptable networks (CANs) based on the thiol-Michael (TM) linkages can be thermal and pH responsive. Here, a new vinyl-sulfone-based thiol-Michael crosslinker is synthesized and incorporated into acrylate-based CANs to achieve stable materials with dynamic properties. Because of the reversible TM linkages, excellent temperature-responsive re-healing and malleability properties are achieved. In addition, for the first time, a photoresponsive coumarin moiety is incorporated with TM-based CANs to introduce light-mediated reconfigureability and postpolymerization crosslinking. Overall, these materials can be on demand dynamic in response to heat and light but can retain mechanical stability at ambient condition.

Deformable microparticles for shuttling nanoparticles to the vascular wall

Vascular-targeted drug carriers must localize to the wall (i.e., marginate) and adhere to a diseased endothelium to achieve clinical utility. The particle size has been reported as a critical physical property prescribing particle margination in vitro and in vivo blood flows. Different transport process steps yield conflicting requirements-microparticles are optimal for margination, but nanoparticles are better for intracellular or tissue delivery. Here, we evaluate deformable hydrogel microparticles as carriers for transporting nanoparticles to a diseased vascular wall. Depending on microparticle modulus, nanoparticle-loaded poly(ethylene glycol)-based hydrogel microparticles delivered significantly more 50-nm nanoparticles to the vessel wall than freely injected nanoparticles alone, resulting in >3000% delivery increase. This work demonstrates the benefit of optimizing microparticles' efficient margination to enhance nanocarriers' transport to the vascular wall.

Sequence-defined oligoampholytes using hydrolytically stable vinyl sulfonamides: design and UCST behaviour

Water soluble sequence-defined oligoampholytes with precisely positioned charges were synthesised via an iterative solid-phase synthesis protocol using vinyl sulfonamide and acrylate building blocks.

Inclusion of Cross-Linked Elastin in Gelatin/PEG Hydrogels Favourably Influences Fibroblast Phenotype

The capacity of a biomaterial to innately modulate cell behavior while meeting the mechanical property requirements of the implant is a much sought-after goal within bioengineering. Here we covalently incorporate soluble elastin into a gelatin–poly (ethylene glycol) (PEG) hydrogel for three-dimensional (3D) cell encapsulation to achieve these properties. The inclusion of elastin into a previously optimized gelatin–PEG hydrogel was then evaluated for effects on entrapped fibroblasts, with the aim to assess the hydrogel as an extracellular matrix (ECM)-mimicking 3D microenvironment for cellular guidance. Soluble elastin was incorporated both physically and covalently into novel gelatin/elastin hybrid PEG hydrogels with the aim to harness the cellular interactivity and mechanical tunability of both elastin and gelatin. This design allowed us to assess the benefits of elastin-containing hydrogels in guiding fibroblast activity for evaluation as a potential dermal replacement. It was found that a gelatin–PEG hydrogel with covalently conjugated elastin, supported neonatal fibroblast viability, promoted their proliferation from 7.3% to 13.5% and guided their behavior. The expression of collagen alpha-1(COL1A1) and elastin in gelatin/elastin hybrid gels increased 16-fold and 6-fold compared to control sample at day 9, respectively. Moreover, cells can be loaded into the hydrogel precursor solution, deposited, and the matrix cross-linked without affecting the incorporated cells adversely, thus enabling a potential injectable system for dermal wound healing.

Synthesis and mechanistic investigations of pH-responsive cationic poly(aminoester)s

The synthesis and degradation mechanisms of a class of pH-sensitive, rapidly degrading cationic poly(α-aminoester)s are described. These reactive, cationic polymers are stable at low pH in water, but undergo a fast and selective degradation at higher pH to liberate neutral diketopiperazines. Related materials incorporating oligo(α-amino ester)s have been shown to be effective gene delivery agents, as the charge-altering degradative behavior facilitates the delivery and release of mRNA and other nucleic acids in vitro and in vivo. Herein, we report detailed studies of the structural and environmental factors that lead to these rapid and selective degradation processes in aqueous buffers. At neutral pH, poly(α-aminoester)s derived from N-hydroxyethylglycine degrade selectively by a mechanism involving sequential 1,5- and 1,6-O→N acyl shifts to generate bis(N-hydroxyethyl) diketopiperazine. A family of structurally related cationic poly(aminoester)s was generated to study the structural influences on the degradation mechanism, product distribution, and pH dependence of the rate of degradation. The kinetics and mechanism of the pH-induced degradations were investigated by 1H NMR, model reactions, and kinetic simulations. These results indicate that polyesters bearing α-ammonium groups and appropriately positioned N-hydroxyethyl substituents are readily cleaved (by intramolecular attack) or hydrolyzed, representing dynamic "dual function" materials that are initially polycationic and transform with changing environment to neutral products.

Local environment-dependent kinetics of ester hydrolysis revealed by direct 1H NMR measurement of degrading hydrogels

We have demonstrated the use of a simple ¹H NMR spectrometry-based method to directly measure the pseudo first-order hydrolytic cleavage rate constant (k_obs) of methacrylate-derived ester crosslinkers in hydrogels composed of PEG, dextran, carboxymethyl dextran (CM-dextran) and hyaluronic acid (HA). Using this technique, we systematically examined how the local environment in the hydrogel influenced the rate of ester hydrolysis. Within the formulations being studied, the esters in the crosslinked polymer network (gel state) degraded 1.8 times faster than esters of similar chemistry in soluble polymers (solution state). Furthermore, the value of k_obs was independent of the polymer concentration or the hydrogel network structure, although these parameters affected the swelling profiles in response to the hydrolytic degradation. On the other hand, the presence of the negatively charged carboxylate groups in the polymer chains decreased k_obs in gel state, while only minimally affecting k_obs in solution state. Hydrogels composed of negatively charged polymers (HA and CM-dextran) had a k_obs about 30% smaller than hydrogels composed of neutral polymers (dextran and PEG). The reported method provides a reliable tool to resolve conflicting views about hydrogel degradation, and to guide the rational design of degradable hydrogel. STATEMENT OF SIGNIFICANCE: Degradable hydrogels are widely used in biological applications. A common degradation mechanism of the crosslinked polymer is by hydrolytic cleavage. However, the hydrogel micro-milieu do affect the behavior of the hydrolysable bonds, for example esters. There have been several conflicting speculations on how hydrogel composition would affect the macroscopic degradation behavior. In this report, we simply, but innovatively applied ordinary ¹H NMR spectrometry-based method to probe the rate of ester cleavage in the native hydrogel milieu. We tried to answer whether these parameters will have direct influence on ester cleavage, or have indirect effect on the overall network disintegration behavior. This study provides quantitative evidences to assist theoretical modeling and to guide rational formulation design.

Stereocontrolled, multi-functional sequence-defined oligomers through automated synthesis

In this work, stereocontrolled sequence-defined oligomers were prepared using an automated thiolactone-based platform that allows post-synthesis functionalisation.

Post-synthesis functionalized hydrogel microparticles for high performance microRNA detection

Encoded hydrogel microparticles, synthesized by Stop Flow Lithography (SFL), have shown great potential for microRNA assays for their capability to provide high multiplexing capacity and solution-like hybridization kinetics. However, due to the low conversion of copolymerization during particle synthesis, current hydrogel microparticles can only utilize ∼10% of the input probes that functionalize the particles for miRNA assay. Here, we present a novel method of functionalizing hydrogel microparticles after particle synthesis by utilizing unconverted double bonds remaining inside the hydrogel particles to maximize functional probe incorporation and increase the performance of miRNA assay. This allows covalent bonding of functional probes to the hydrogel network after particle synthesis. Because of the abundance of the unconverted double bonds and accessibility of all probes, the probe density increases about 8.2 times compared to that of particles functionalized during the synthesis. This results lead to an enhanced miRNA assay performance that improves the limit of detection from 4.9 amol to 1.5 amol. In addition, higher specificity and shorter assay time are achieved compared to the previous method. We also demonstrate a potential application of our particles by performing multiplexed miRNA detections in human plasma samples.

Radical free crosslinking of direct-write 3D printed hydrogels through a base catalyzed thiol-Michael reaction

3D printed micelle-based hydrogels were mechanically stabilized and crosslinked through the base catalyzed thiol-Michael addition in PBS buffer, without the use of potentially cytotoxic radical chemistry.

On-Resin Macrocyclization of Peptides Using Vinyl Sulfonamides as a Thiol-Michael "Click" Acceptor

Macrocyclization of linear peptides imparts improved stability to enzymatic degradation and increases potency of function. Many successful macrocyclization of peptides both in solution and on-resin have been achieved but are limited in scope as they lack selectivity, require long reaction times, or necessitate heat. To overcome these drawbacks a robust and facile strategy was developed employing thiol-Michael click chemistry via an N-methyl vinyl sulfonamide. We demonstrate its balance of reactivity and high stability through FTIR model kinetic studies, reaching 88% conversion over 30 min, and NMR stability studies, revealing no apparent degradation over an 8 day period in basic conditions. Using a commercially available reagent, 2-chloroethane sulfonyl chloride, the cell adhesion peptide, RGDS, was functionalized and macrocyclized on-resin with a relative efficiency of over 95%. The simplistic nature of this process demonstrates the effectiveness of vinyl sulfonamides as a thiol-Michael click acceptor and its applicability to many other bioconjugation applications.

Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment

The cell microenvironment has emerged as a key determinant of cell behavior and function in development, physiology, and pathophysiology. The extracellular matrix (ECM) within the cell microenvironment serves not only as a structural foundation for cells but also as a source of three-dimensional (3D) biochemical and biophysical cues that trigger and regulate cell behaviors. Increasing evidence suggests that the 3D character of the microenvironment is required for development of many critical cell responses observed in vivo, fueling a surge in the development of functional and biomimetic materials for engineering the 3D cell microenvironment. Progress in the design of such materials has improved control of cell behaviors in 3D and advanced the fields of tissue regeneration, in vitro tissue models, large-scale cell differentiation, immunotherapy, and gene therapy. However, the field is still in its infancy, and discoveries about the nature of cell-microenvironment interactions continue to overturn much early progress in the field. Key challenges continue to be dissecting the roles of chemistry, structure, mechanics, and electrophysiology in the cell microenvironment, and understanding and harnessing the roles of periodicity and drift in these factors. This review encapsulates where recent advances appear to leave the ever-shifting state of the art, and it highlights areas in which substantial potential and uncertainty remain.

Control of gelation, degradation and physical properties of polyethylene glycol hydrogels through the chemical and physical identity of the crosslinker

Tuning hydrogel properties through minor modifications of the crosslinker structure is a beneficial approach for hydrogel design that could result in hydrogels with wide range of properties to match a desired application.

Tuning Hydrogel Properties to Promote the Assembly of Salivary Gland Spheroids in 3D

Current treatments for chronic xerostomia, or "dry mouth", do not offer long-term therapeutic benefits for head and neck cancer survivors previously treated with curative radiation. Towards the goal of creating tissue-engineered constructs for the restoration of salivary gland functions, we developed new hyaluronic acid (HA)-based hydrogels using thiolated HA (HA-SH) and acrylated HA (HA-AES) with a significant molecular weight mismatch. Four hydrogel formulations with varying HA concentration, (1-2.4 wt%) and thiol/acrylate ratios (2/1 to 36/1) and elastic moduli (G': 35 to 1897 Pa, 2 h post-mixing) were investigated. In our system, thiol/acrylate reaction was initiated rapidly upon mixing of HA-SH/HA-AES to establish thioether crosslinks with neighboring ester groups, and spontaneous sulfhydryl oxidation occurred slowly over several days to install a secondary network. The concurrent reactions cooperatively create a cell-permissive network to allow for cell expansion and aggregation. Multicellular spheroids formed readily from a robust ductal epithelial cell line (Madin-Darby Canine Kidney, MDCK cells) in all hydrogel formulations investigated. Primary salivary human stem/progenitor cells (hS/PCs), on the other hand, are sensitive to the synthetic extracellular environment, and organized acini-like structures with an average diameter of 50 µm were obtained only in gels with G' ≤ 216 Pa and a thiol/acrylate ratio ≥18. The spheroid size and size distribution were dependent on the HA content in the hydrogel. Cells in hS/PC spheroids formed tight junctions (occludin), remained viable and proliferative, secreted structural proteins (collagen IV and laminin) found in the basement membrane and maintained key stem/progenitor markers. We conclude that incorporation of time-dependent, dynamic features into a covalently crosslinked HA network produces an adaptable hydrogel framework that promotes hS/PC assembly and supports early aspects of salivary morphogenesis, key to reconstitution of a fully functional implantable salivary gland.

Biodegradable brush-type copolymer modified with targeting peptide as a nanoscopic platform for targeting drug delivery to treat castration-resistant prostate cancer

Well-defined amphiphilic tumor-targeting brush-type copolymers, poly(oligo(ethylene glycol) monomethyl ether methacrylate-co-G3-C12)-g-poly(ε-caprolactone) (P(OEGMA-co-G3-C12)-g- PCL), were synthesized by the combination of ring-opening polymerization (ROP), reversible addition-fragmentation transfer (RAFT) polymerization and polymer post-functionalization, in which G3-C12 was castration-resistant prostate cancer (CRPC) targeting peptide. The obtained polymers were then employed for the targeted treatment of CRPC by delivering a hydrophobic anticancer drug (bufalin, BUF). Polymerizable monomer, 3-((2-(methacryloyloxy)ethyl)thio)propanoic acid (BSMA) and PCL-based macromolecular monomer (PCLMA) were synthesized at first. RAFT polymerization of OEGMA, BSMA, and PCLMA afforded amphiphilic brush-type copolymers, P(OEGMA-co-BSMA)-g-PCL. Post-functionalization of the obtained polymers with G3-C12 led to the formation of the final amphiphilic targeting brush-type copolymers, P(OEGMA-co-G3-C12)-g- PCL. In aqueous media, P(OEGMA-co-G3-C12)-g-PCL self-assembles into micelles with a hydrodynamic diameter (Dh) of ∼66.1±0.44nm. It was demonstrated that the obtained micellar nanoparticles exhibited good biocompatibility and biodegradability. Besides, BUF-loaded micellar nanoparticles assembled from P(OEGMA-co-G3-C12)-g-PCL, BUF-NP-(G3-C12), showed a controlled drug release in vitro and improved anticancer efficacy both in vitro and in vivo.

Double-network hydrogels improve pH-switchable adhesion

For environmentally-switchable adhesive systems to be reused repeatedly, the adhesive strength must not deteriorate after each adhesion cycle. An important criterion to achieve this goal is that the integrity of the interface must be retained after each adhesion cycle. Furthermore, in order to have practical benefits, reversing the adhesion must be a relatively rapid process. Here, a double-network hydrogel of poly(methacrylic acid) and poly[oligo(ethylene glycol)methyl ether methacrylate] is shown to undergo adhesive failure during pH-switchable adhesion with a grafted (brush) layer of polycationic poly[2-(diethyl amino)ethyl methacrylate], and can be reused at least seven times. The surfaces are attached at pH 6 and detached at pH 1. A single-network hydrogel of poly(methacrylic acid), also exhibits pH-switchable adhesion with poly[2-(diethyl amino)ethyl methacrylate] but cohesive failure leads to an accumulation of the hydrogel on the brush surface and the hydrogel can only be reused at different parts of that surface. Even without an environmental stimulus (i.e. attaching and detaching at pH 6), the double-network hydrogel can be used up to three times at the same point on the brush surface. The single-network hydrogel cannot be reused under such circumstances. Finally, the time taken for the reuse of the double-network hydrogel is relatively rapid, taking no more than an hour to reverse the adhesion.

Thiol-ene click hydrogels for therapeutic delivery

Hydrogels are of growing interest for the delivery of therapeutics to specific sites in the body. For use as a delivery vehicle, hydrophilic precursors are usually laden with bioactive moieties and then directly injected to the site of interest for in situ gel formation and controlled release dictated by precursor design. Hydrogels formed by thiol-ene click reactions are attractive for local controlled release of therapeutics owing to their rapid reaction rate and efficiency under mild aqueous conditions, enabling in situ formation of gels with tunable properties often responsive to environmental cues. Herein, we will review the wide range of applications for thiol-ene hydrogels, from the prolonged release of anti-inflammatory drugs in the spine to the release of protein-based therapeutics in response to cell-secreted enzymes, with a focus on their clinical relevance. We will also provide a brief overview of thiol-ene click chemistry and discuss the available alkene chemistries pertinent to macromolecule functionalization and hydrogel formation. These chemistries include functional groups susceptible to Michael type reactions relevant for injection and radically-mediated reactions for greater temporal control of formation at sites of interest using light. Additionally, mechanisms for the encapsulation and controlled release of therapeutic cargoes are reviewed, including i) tuning the mesh size of the hydrogel initially and temporally for cargo entrapment and release and ii) covalent tethering of the cargo with degradable linkers or affinity binding sequences to mediate release. Finally, myriad thiol-ene hydrogels and their specific applications also are discussed to give a sampling of the current and future utilization of this chemistry for delivery of therapeutics, such as small molecule drugs, peptides, and biologics.

Synthesis and biocompatibility of a biodegradable and functionalizable thermo-sensitive hydrogel

Injectable thermal gels are a useful tool for drug delivery and tissue engineering. However, most thermal gels do not solidify rapidly at body temperature (37°C). We addressed this by synthesizing a thermo-sensitive, rapidly biodegrading hydrogel. Our hydrogel, poly(ethylene glycol)-co-poly(propanol serinate hexamethylene urethane) (EPSHU), is an ABA block copolymer comprising A, methoxy poly ethylene glycol group and B, poly (propanol L-serinate hexamethylene urethane). EPSHU was characterized by gel permeation chromatography for molecular weight and ¹H NMR and Fourier transformed infrared for structure. Rheological studies measured the phase transition temperature. In vitro degradation in cholesterol esterase and in Dulbecco's phosphate buffered saline (DPBS) was tracked using the average molecular weight measured by gel permeation chromatography. LIVE/DEAD and resazurin reduction assays performed on NIH 3T3 fibroblasts exposed to EPSHU extracts demonstrated no cytotoxicity. Subcutaneous implantation into BALB/cJ mice indicated good biocompatibility in vivo. The biodegradability and biocompatibility of EPSHU together make it a promising candidate for drug delivery applications that demand carrier gel degradation within months.

Synthesis and characterization of a library of in-situ curing, nonswelling ethoxylated polyol thiol-ene hydrogels for tailorable macromolecule delivery

A transesterfication reaction is used to synthesize tri-thiol-functionalized-ethoxylated polyols that are combined with polyethylene glycol diacrylates to form a biodegradable hydrogel library. Hydrogels display nonswelling equilibration and offer temporal control over material degradation and the release of biomolecules. The demonstrated in vitro biocompatibility makes this a versatile platform that can be used for local drug delivery to volume-constrained anatomical sites.

3D biofabrication strategies for tissue engineering and regenerative medicine

Over the past several decades, there has been an ever-increasing demand for organ transplants. However, there is a severe shortage of donor organs, and as a result of the increasing demand, the gap between supply and demand continues to widen. A potential solution to this problem is to grow or fabricate organs using biomaterial scaffolds and a person's own cells. Although the realization of this solution has been limited, the development of new biofabrication approaches has made it more realistic. This review provides an overview of natural and synthetic biomaterials that have been used for organ/tissue development. It then discusses past and current biofabrication techniques, with a brief explanation of the state of the art. Finally, the review highlights the need for combining vascularization strategies with current biofabrication techniques. Given the multitude of applications of biofabrication technologies, from organ/tissue development to drug discovery/screening to development of complex in vitro models of human diseases, these manufacturing technologies can have a significant impact on the future of medicine and health care.

Bioorthogonally cross-linked hydrogel network with precisely controlled disintegration time over a broad range

Hydrogels with predictable degradation are highly desired for biomedical applications where timely disintegration of the hydrogel (e.g., drug delivery, guided tissue regeneration) is required. However, precisely controlling hydrogel degradation over a broad range in a predictable manner is challenging due to limited intrinsic variability in the degradation rate of liable bonds and difficulties in modeling degradation kinetics for complex polymer networks. More often than not, empirical tuning of the degradation profile results in undesired changes in other properties. Here we report a simple but versatile hydrogel platform that allows us to formulate hydrogels with predictable disintegration time from 2 to >250 days yet comparable macroscopic physical properties. This platform is based on a well-defined network formed by two pairs of four-armed polyethylene glycol macromers terminated with azide and dibenzocyclooctyl groups, respectively, via labile or stable linkages. The high-fidelity bioorthogonal reaction between the symmetric hydrophilic macromers enables robust cross-linking in water, phosphate-buffered saline, and cell culture medium to afford tough hydrogels capable of withstanding >90% compressive strain. Strategic placement of labile ester linkages near the cross-linking site within this superhydrophilic network, accomplished by adjustments of the ratio of the macromers used, enables broad tuning of the disintegration rates precisely matching with the theoretical predictions based on first-order linkage cleavage kinetics. This platform can be exploited for applications where a precise degradation rate is targeted.

Gelation chemistries for the encapsulation of nanoparticles in composite gel microparticles for lung imaging and drug delivery

The formation of 10-40 μm composite gel microparticles (CGMPs) comprised of ∼100 nm drug containing nanoparticles (NPs) in a poly(ethylene glycol) (PEG) gel matrix is described. The CGMP particles enable targeting to the lung by filtration from the venous circulation. UV radical polymerization and Michael addition polymerization reactions are compared as approaches to form the PEG matrix. A fluorescent dye in the solid core of the NP was used to investigate the effect of reaction chemistry on the integrity of encapsulated species. When formed via UV radical polymerization, the fluorescence signal from the NPs indicated degradation of the encapsulated species by radical attack. The degradation decreased fluorescence by 90% over 15 min of UV exposure. When formed via Michael addition polymerization, the fluorescence was maintained. Emulsion processing using controlled shear stress enabled control of droplet size with narrow polydispersity. To allow for emulsion processing, the gelation rate was delayed by adjusting the solution pH. At a pH = 5.4, the gelation occurred at 3.5 h. The modulus of the gels was tuned over the range of 5 to 50 kPa by changing the polymer concentration between 20 and 70 vol %. NP aggregation during polymerization, driven by depletion forces, was controlled by the reaction kinetics. The ester bonds in the gel network enabled CGMP degradation. The gel modulus decreased by 50% over 27 days, followed by complete gel degradation after 55 days. This permits ultimate clearance of the CGMPs from the lungs. The demonstration of uniform delivery of 15.8 ± 2.6 μm CGMPs to the lungs of mice, with no deposition in other organs, is shown, and indicates the ability to concentrate therapeutics in the lung while avoiding off-target toxic exposure.