Set potential regulation reveals additional oxidation peaks of Geobacter sulfurreducens anodic biofilms

Frequency-modulated alternating current-driven bioelectrodes for enhanced mineralization of Alizarin Yellow R

The alternating current (AC)-driven bioelectrochemical process, in-situ coupling cathodic reduction and anodic oxidation in a single electrode, offers a promising way for the mineralization of refractory aromatic pollutants (RAPs). Frequency modulation is vital for aligning reduction and oxidation phases in AC-driven bioelectrodes, potentially enhancing their capability to mineralize RAPs. Herein, a frequency-modulated AC-driven bioelectrode was developed to enhance RAP mineralization, exemplified by the degradation of Alizarin Yellow R (AYR). Optimal performance was achieved at a frequency of 1.67 mHz, resulting in the highest efficiency for AYR decolorization and subsequent mineralization of intermediates. Performance declined at both higher (3.33 and 8.30 mHz) and lower (0.83 mHz) frequencies. The bioelectrode exhibited superior electron utilization, bidirectional electron transfer, and redox bifunctionality, effectively aligning reduction and oxidation processes to enhance AYR mineralization. The 1.67 mHz frequency facilitated the assembly of a collaborative microbiome dedicated to AYR bio-mineralization, characterized by an increased abundance of functional consortia proficient in azo dye reduction (e.g., Stenotrophomonas and Shinella), aromatic intermediates oxidation (e.g., Sphingopyxis and Sphingomonas), and electron transfer (e.g., Geobacter and Pseudomonas). This study reveals the role of frequency modulation in AC-driven bioelectrodes for enhanced RAP mineralization, offering a novel and sustainable approach for treating RAP-bearing wastewater.

Significance of a minor pilin PilV in biofilm cohesion of Geobacter sulfurreducens

Bacterial adhesion plays a vital role in forming and shaping the structure of electroactive biofilms that are essential for the performance of bioelectrochemical systems (BESs). Type IV pili are known to mediate cell adhesion in many Gram-negative bacteria, but the mechanism of pili-mediated cell adhesion of Geobacter species on anode surface remains unclear. Herein, a minor pilin PilV2 was found to be essential for cell adhesion ability of Geobacter sulfurreducens since the lack of pilV2 gene depressed the cell adhesion capability by 81.2% in microplate and the anodic biofilm density by 23.1 % at -0.1 V and 37.7 % at -0.3 V in BESs. The less cohesiveness of mutant biofilms increased the charge transfer resistance and biofilm resistance, which correspondingly lowered current generation of the pilV2-deficient strain by up to 63.2 % compared with that of the wild-type strain in BESs. The deletion of pilV2 posed an insignificant effect on the production of extracellular polysaccharides, pili, extracellular cytochromes and electron shuttles that are involved in biofilm formation or extracellular electron transfer (EET) process. This study demonstrated the significance of pilV2 gene in cell adhesion and biofilm formation of G. sulfurreducens, as well as the importance of pili-mediated adhesion for EET of electroactive biofilm.

Electron syntrophy between mixed hydrogenogens and Geobacter metallireducens boosted dark hydrogen fermentation: Clarifying roles of electroactive extracellular polymeric substances

To modulate the electron transfer behavior of hydrogen-producing bacteria (HPB) for enhanced hydrogen production, Geobacter metallireducens culture (GM) was introduced as an electron syntrophy partner and redox balance regulator in dark fermentation systems with hydrogen-producing sludge (HPS) as inoculum. The highest hydrogen yield was 306.5 mL/g-COD at the GM/HPS volatile solids ratio of 0.08, which was 65.2 % higher than the HPS group. The multi-layered extracellular polymeric substances (EPS) of GM played a significant role in promoting hydrogen production, with c-type cytochromes probably serving as electroactive functional components. The addition of GM significantly improved the NADH/NAD+ ratio, electron transport system activity, hydrogenase activity, and electrochemical properties of HPS. Furthermore, the microbial community structure and metabolic functions were optimized due to the potential syntrophic interaction between Clostridium sensu stricto (dominant HPB) and Geobacter, thus promoting hydrogen production. This study provided novel insights into the interactions among exoelectrogens, electroactive EPS, and mixed HPB.

Cytochrome gene expression shifts in Geobacter sulfurreducens to maximize energy conservation in response to changes in redox conditions

Previous studies have identified that Geobacter sulfurreducens has three different electron transfer pathways for respiration, and it switches between these pathways to adapt to the redox potential of its electron acceptor. However, only a small fraction of the electron carriers from each pathway have been identified. In this study, we combined electrochemical and gene expression data to identify electron carriers in the inner membrane, periplasm, outer membrane, and exterior of the cell that may be induced by the use of the three different electron transfer pathways. Cyclic voltammetry was performed on thin biofilms grown on anodes poised at different redox potentials, providing a quantitative assessment of the relative use of three electron-transfer pathways in each condition (catalytic midpoint potentials (EKAs) of -0.227 V [Low], -0.15 V [Medium], -0.1 V [High] vs. SHE). Transcriptomic analyses as a function of electrochemical signals or fumarate utilization showed differential induction in inner membrane (Medium: cbcL), periplasmic (Low: ppcB/ppcE, Medium: ppcA), outer membrane (Low: extA/extC, Medium: extJ/extK, Fumarate: extF/extG), and extracellular (Medium: omcZ, High/Fumarate: omcS/omcT) cytochromes, suggesting the pathway signals are associated with complex transcriptomic responses in genes across the electron transfer pathway. Our method combining electrochemical modeling and transcriptomics could be adapted to better understand electron transport in other electroactive organisms with complex metabolisms.

Efficient biodechlorination at the Fe3O4-based silicone powder modified chlorobenzene-affinity anode

The treatment of chlorinated volatile organic compounds faces challenges of secondary pollution and less-efficiency due to the substitution of chlorine. Microbial fuel cells (MFCs) provide a promising opportunity for its abatement. In this study, a novel Fe3O4 nanoparticles and silicone-based powder (SP) were integrated and immobilized on carbon felt (CF+Fe3O4@SP), which was further used as anode in the chlorobenzene (CB) powered MFC. Owing to the cooperation between SP and Fe3O4, the anode exhibited excellent performance for both biodechlorination and power generation. The results indicated that the CF+Fe3O4@SP anode loaded MFC achieved 98.5% removal of 200 mg/L CB within 28 h, and the maximum power density was 675.9 mW/m3, which was a 45.6% increase compared to that of the bare CF anode. Microbial community analysis indicated that the genera Comamonadaceae, Pandoraea, Obscuribacteraceae, and Truepera were dominated, especially, the Comamonadaceae and Obscuribacteraceae showed outstanding affinity for Fe3O4 and SP, respectively. Moreover, the proportion of live bacteria, secretion of extracellular polymer substances, and protein content in the extracellular polymer substances were significantly increased by modifying Fe3O4@SP onto the carbon-based anode. Thus, this study provides new insights into the development of MFCs for refractory and hydrophobic volatile organic compounds removal.

Protection of electroactive biofilms against hypersaline shock by quorum sensing

Quorum sensing (QS) is an ideal strategy for boosting the operating performance of electroactive biofilms (EABs), but its potential effects on the protection of electroactive biofilms against environmental shocks (e.g., hypersaline shock) have been rarely revealed. In this study, a QS signaling molecule, the N-(3-oxo-dodecanoyl)-L-homoserine lactone, was employed to promote the anti-shock property of the EABs against extreme saline shock. The maximum current density of the QS-regulated biofilm recovered to 0.17 mA/cm² after 10% salinity exposure, which was much higher than those of its counterparts. The laser scanning confocal microscope confirmed a thicker and more compact biofilm with the presence of the QS signaling molecule. The extracellular polymeric substances (EPS) might play a crucial role in the anti-shocking behaviors, as the polysaccharides in EPS of QS-biofilm had doubled compared to the groups with acylase (the QS quencher). The microbial community analysis indicated that the QS molecule enriched the relative abundance of key species including Pseudomonas sp. and Geobacter sp., which were both beneficial to the stability and electroactivity of the biofilms. The functional genes related to the bacterial community were also up-regulated with the presence of the QS molecule. These results highlight the importance of QS effects in protecting electroactive biofilm under extreme environmental shock, which provides effective and feasible strategies for the future development of microbial electrochemical technologies.

Periodic step polarization accelerates electron recovery by electroactive biofilms (EABs)

Relatively low rate of electron recovery is one of the factors that limit the advancement of bioelectrochemical systems. Here, new periodic polarizations were investigated with electroactive biofilms (EABs) enriched from activated sludge and Geobacter sulfurreducens biofilms. When representative anode potentials (E_a ) were applied, redox centers with midpoint potentials (E_mid ) higher than E_a were identified by localized cyclic voltammetry. The electrons held by these redox centers were accessible when E_a was raised to 0.4 V (vs. Ag/AgCl). New periodic polarizations that discharge at 0.4 V recovered electrons faster than normal periodic and fixed-potential polarizations. The best-performing periodic step polarization accelerated electron recovery by 23%-24% and 12%-76% with EABs and G. sulfurreducens biofilms, respectively, compared to the fixed-potential polarization. Quantitative reverse transcription polymerase chain reaction showed an increased abundance of omcZ mRNA transcripts from G. sulfurreducens after periodic step polarization. Therefore, both the rate of energy recovery by EABs and the performance of bioelectrochemical systems can be enhanced by improving the polarization schemes.

Enhanced production of microalgae-originated photosensitizer by integrating photosynthetic electrons extraction and antibiotic induction towards photocatalytic degradation of antibiotic: A novel complementary treatment process for antibiotic removal from effluent of conventional biological wastewater treatment

Antibiotic residues in effluents from bio-treated wastewaters are mainly responsible for the spread of antibiotic resistance genes in the environment. Conventional physicochemical treatments are thought to be unsustainable due to high energy consumption, large consumption of chemicals and environmental unfriendly processing step. In this study, a novel approach by integrating photosynthetic electrons extraction from microalgae with antibiotic induction was used to enhance the production of microalgae-originated photosensitizer for photolytic removal of antibiotic residues in effluents from conventional bio-treated wastewaters. Results showed that the accumulation of photoactive substances in extracellular polymeric substance (EPS) of chlorella vulgaris was positively related to the amounts of photosynthetic electrons extracted by the electrode which is a potential-dependent process and can be further enhanced by tetracycline (TC) induction. The protein and humic acid which are considered two main photoactive substances in EPS produced at 0.6 V accumulated to a high level of 320 and 24 μg/cm³ and were further increased to 380 and 48 μg/cm³ when TC was added which were 4.7 and 6.4-folds higher than that produced at potential free in the absence of TC. The EPS produced at 0.6 and 0.8 V led to 1.34 and 1.53-fold acceleration in photosensitized degradation of TC compared to that of EPS free in secondary effluent of municipal wastewater treatment plant. The complex heterocyclic ring structure of TC was broken down into simple monocyclic aromatic compounds, indicating a marked reduction in biotoxicity and recalcitrance. The hydroxyl radical played a main role for the photolysis of TC followed by singlet oxygen. This technology provides a new alternative to conventional physicochemical treatment as complementary treatment processes for biological wastewater treatment in terms of antibiotics removal.

The effect of intermittent anode potential regimes on the morphology and extracellular matrix composition of electro-active bacteria

Electro-active bacteria (EAB) can form biofilms on an anode (so-called bioanodes), and use the electrode as electron acceptor for oxidation of organics in wastewater. So far, bioanodes have mainly been investigated under a continuous anode potential, but intermittent anode potential has resulted in higher currents and different biofilm morphologies. However, little is known about how intermittent potential influences the electron balance in the anode compartment. In this study, we investigated electron balances of bioanodes at intermittent anode potential regimes. We used a transparent non-capacitive electrode that also allowed for in-situ quantification of the EAB using optical coherence tomography (OCT). We observed comparable current densities between continuous and intermittent bioanodes, and stored charge was similar for all the applied intermittent times (5 mC). Electron balances were further investigated by quantifying Extracellular Polymeric Substances (EPS), by analyzing the elemental composition of biomass, and by quantifying biofilm and planktonic cells. For all tested conditions, a charge balance of the anode compartment showed that more electrons were diverted to planktonic cells than biofilm. Besides, 27–43% of the total charge was detected as soluble EPS in intermittent bioanodes, whereas only 15% was found as soluble EPS in continuous bioanodes. The amount of proteins in the EPS of biofilms was higher for intermittent operated bioanodes (0.21 mg COD proteins mg COD biofilm⁻¹) than for continuous operated bioanodes (0.05 mg COD proteins mg COD biofilm⁻¹). OCT revealed patchy morphologies for biofilms under intermittent anode potential. Overall, this study helped understanding that the use of a non-capacitive electrode and intermittent anode potential deviated electrons to other processes other than electric current at the electrode by identifying electron sinks in the anolyte and quantifying the accumulation of electrons in the form of EPS.

•

Continuous acetate feeding and intermittent anode potential lead to EPS production in electro-active bacteria.

•

A charge balance was made including soluble EPS and planktonic cells.

•

Patchy biofilm morphologies and more planktonic cells were observed when intermittent anode potential was applied.

•

Biofilms grown under intermittent anode potential had more EPS and more proteins.

Redox potential-induced regulation of extracellular polymeric substances in an electroactive mixed community biofilm

Electroactive biofilms are promising in achieving efficient wastewater treatment and energy conversion in bioelectrochemical systems (BESs). Extracellular polymeric substances (EPS) are important for physical contact with electrode surface and extracellular electron transfer (EET) within biofilm. Redox potential is an important trigger for the regulation of EPS in microbial aggregates, but this yet is lacking for electroactive mixed community biofilms. This study first explored how redox potential affected EPS of electroactive mixed community biofilms, which were cultured in BES reactors with different anode potentials (-0.3 V, 0 V, +0.3 V, +0.6 V vs. SCE) using artificial brewery wastewater as substrate. The anode potential regulated biocurrent generation, overall EPS production, EPS composition and EPS redox properties. The biofilms poised at 0 V exhibited the highest current production (7.2 mA) and EPS redox capacity, while the +0.6 V biofilms had the lowest current production (1.2 mA) with lowest EPS redox capacity. The steady-state current exhibited a significant positive correlation with EPS redox capability, suggesting an important role of EPS in anode potential-dependent current production. Significant positive correlations between proteins or humic substances in EPS and EPS redox properties further verified that EPS redox feature raised from proteins and humic substances. This study provided a potential mechanism that anode potential determined the electroactivity of anode biofilm via regulating EPS composition and redox properties, and will facilitate the use of electroactive biofilms in bioelectrochemical applications.

Customizable design strategies for high-performance bioanodes in bioelectrochemical systems

Bioelectrochemical systems (BESs) can fulfill the demand for renewable energy and wastewater treatment but still face significant challenges to improve their overall performance. Core efforts have been made to enhance the bioelectrode performance, yet, previous approaches are fragmented and have limited applicability, unable to flexibly adjust physicochemical and structural properties of electrodes for specific requirements in various applications. Here, we propose a facile electrode design strategy that integrates three-dimensional printing technology and functionalized modular electrode materials. A customized graphene-based electrode with hierarchical pores and functionalized components (i.e., ferric ions and magnetite nanoparticles) was fabricated. Owing to efficient mass and electron transfer, a high volumetric current density of 10,608 ± 1,036 A/m³ was achieved, the highest volumetric current density with pure Geobacter sulfurreducens to date. This strategy can be readily applied to existing BESs (e.g., microbial fuel cells and microbial electrosynthesis) and provide a feasibility for practical application.

•

A 3D-printed graphene aerogel electrode was proposed for BESs

•

The optimized electrode mass transfer resistance was less than 5% of carbon felt

•

A high volumetric current density of 10,608 ± 1,036 A/m³ was achieved

Using easy-to-biodegrade co-substrate to eliminate microcystin toxic on electrochemically active bacteria and enhance bioelectricity generation from cyanobacteria biomass

Cyanobacterial biomass is a promising natural resource for power generation, through the reactions bio-catalyzed by electrochemically active bacteria (EAB). However, the major limitation is the involvement of Microcystin-LR (MC-LR) in inhibiting EAB activation. In this work, toxic M. aeruginosa biomass was employed as analyte of a microbial fuel cell (MFC), and sodium acetate was applied as easy-to-biodegrade co-substrate to alleviate the MC-LR stress on EAB survival. The running stability was continuously enhanced with the increment of co-substrate concentration. The sufficient co-substrate supply (6.0 mM) eliminated the negative effects of MC-LR on the cyanobacteria biomass fed-MFC performance; it contributed 12.7% extension on the electric cyclic terms and caused the productions of the power density which was comparable and even 3.8% higher than its corresponding control (MFC treated with acetate alone). The co-substrate addition also increased coulombic efficiency by 60.1%, microcystin-LR removal efficiency increased by 64.7%, and diversified the microbial community with more species able to biodegrade the MC-LR, bio-transforming the metabolites and EAB. Microcystin-degrading bacteria, such as Sphingopyxis sp., Burkholderia-Paraburkholderia, and Bacillus sp., were remarkably increased, and EAB, including Shewanella sp., Desulfovibrio desulfuricans, Aeromonas hydrophila, were also much more enriched in co-substrate use protocol. Therefore, this study verified a co-substrate strategy for simultaneously eliminating MC-LR toxin and enhancing bioelectricity generation from cyanobacterial biomass via an MFC.

Physiological potential of extracellular polysaccharide in promoting Geobacter biofilm formation and extracellular electron transfer

Geobacter sulfurreducens biofilms have promising applications in renewable energy, pollutant bioremediation, and bioelectronic applications. Genetically manipulating G. sulfurreducens biofilms is an effective strategy to improve the capacity of extracellular electron transfer (EET). Extracellular polysaccharide, a sticky component surrounding microbes, plays an important role in EET. Herein, we constructed a mutant of G. sulfurreducens strain PCA overexpressing the gene GSU1501 (part of the ATP-dependent exporter of the polysaccharide biosynthesis gene operon), designated strain PCA-1501, to increase EET capacity. Experimental results showed that the overexpression of GSU1501 increased extracellular polysaccharide secretion by 25.5%, which promoted the formation of biofilm with higher thickness and viability, as well as the content of extracellular c-type cytochromes. Compared with the control strain, the mutant showed a higher capacity of Fe(III) oxide reduction and current generation (increased by 20.4% and 22.2%, respectively). Interestingly, the overexpression of GSU1501 hindered the pili formation by reducing the transcription level of pilA; a compensatory relationship between extracellular polysaccharide and pili in promoting biofilm formation deserves further investigation. This study provides a feasible method to promote the EET capacity of G. sulfurreducens biofilms, which benefit their bioelectrochemical applications.

Methanogenesis inhibitors used in bio-electrochemical systems: A review revealing reality to decide future direction and applications

Microbial fuel cell (MFC) is a robust technology capable of treating real wastewaters by utilizing mixed anaerobic microbiota as inoculum for producing electricity from oxidation of the biodegradable matters. However, these mixed microbiota comprises of both electroactive microorganisms (EAM) and substrate/electron scavenging microorganisms such as methanogens. Hence, in order to maximize bioelectricity from MFC, different physio-chemical techniques have been applied in past investigations to suppress activity of methanogens. Interestingly, recent investigations exhibit that methanogens can produce electricity in MFC and possess the cellular machinery like cytochrome c and Type IV pili to perform extracellular electron transfer (EET) in the presence of suitable electron acceptors. Hence, in this review, in-depth analysis of versatile behaviour of methanogens in both MFC and natural anaerobic conditions with different inhibition techniques is explored. This review also discusses the future research directions based on the latest scientific evidence on role of methanogens for EET in MFC.

Potential-dependent extracellular electron transfer pathways of exoelectrogens

Exoelectrogens are distinct from other bacteria owing to their unique extracellular electron transfer (EET) abilities that allow for anaerobic respiration with various external redox-active surfaces, including electrode and metal oxides. Although the EET process is known to trigger diverse extracellular redox reactions, the reverse impact has been long overlooked. Recent evidences show that exoelectrogens can sense the potential changes of external surfaces and alter their EET strategies accordingly, which imparts them remarkable abilities in adapting to diverse and redox-variable environment. This mini-review provides a condensed overview and critical analysis about the recent discoveries on redox-dependent EET pathways of exoelectrogens, with focus on Geobacter sulfurreducens and Shewanella oneidensis. We summarize the detailed responses of various EET components, analyze the drives and mechanisms of such responses, highlight the diversity of EET dynamics among different bacterial species and under integrated effects of redox potential and surface chemistry, and discusses the future research needs.

Enhanced removal of veterinary antibiotic from wastewater by photoelectroactive biofilm of purple anoxygenic phototroph through photosynthetic electron uptake

Purple anoxygenic phototrophs have been recently attracted substantial attention for their growing potential in wastewater treatment and their diverse metabolic patterns can be regulated for process control and optimization. In this study, the photoheterotrophic metabolism of Rhodopseudomonas palustris (R. palustris) was modified by photosynthetic electron uptake using a poised electrode which was explored to enhance removal of veterinary antibiotic from aqueous medium. The results showed that R. palustris grown as biofilm on electrode surface had excellent photoelectroactive activity and the photosynthetic electron uptake from the photoelectroactive biofilm significantly enhanced antibiotic florfenicol (FLO) degradation. The specific degradation rate of FLO at the set electrode potential of 0 V was 2.59-fold higher than that without applied potential. Enhanced co-metabolic reductive dehalogenation by use of the photosynthetic electrons extracted from co-substrate was mainly responsible for FLO degradation which eliminated the antibacterial activity of FLO. The electrode potential controlled the processes of photosynthetic electron uptake and its resultant FLO degradation. The fastest degradation of FLO was achieved at 0 V because the electrode poised at this potential stroke a proper balance between the enhancing photosynthetic electron uptake by serving as electron acceptor and minimizing competition with FLO for the photosynthetic electron from co-substrate. The activity of photoelectroactive biofilm was not negatively affected by FLO at environmental relevant concentration, suggesting its great potential for removal of antibiotic contaminants in wastewater. R. palustris could serve as a reservoir for floR resistance gene but its abundance can be diminished by choosing appropriate electrode potential.

Effect of anaerobic sludge on the bioelectricity generation enhancement of bufferless single-chamber microbial fuel cells

Enhancing the self-buffering capacity is critical in the operation of bufferless microbial fuel cells (BLMFCs). Inorganic carbon (IC) is an ideal endogenous buffer, but its spontaneously accumulated concentration is insufficient to adjust anolyte pH. In this study, BLMFCs were operated with anaerobic sludge to enhance IC accumulation and increase anolyte pH. The accumulated IC concentration during a single running cycle was elevated from 8.3 mM to 12.5 mM, and anolyte pH remained above 7.5. The electric power output was significantly promoted from 332.2 mW·m^-2 to 628.1 mW·m^-2, and the coulombic efficiency (CE) slightly increased from 16.4% to 19.5%. Geobacter was the electro-active genus in the anode biofilms of the MFCs, and its relative abundance in the KCl-S anode biofilm increased from 0.2% to 5.75%. After continuous operation, the predominant genus of the anaerobic sludge had changed from Flavobacterium to Fusibacter.

Anode potentials regulate Geobacter biofilms: New insights from the composition and spatial structure of extracellular polymeric substances

The extracellular electron transfer (EET) efficiency in bioelectrochemical systems has been proven to be dependent on anode potentials. To explore the underlying mechanism, previous studies have mainly focused on EET conduit and bacterial biomass but rarely concerned with the role of extracellular polymeric substances (EPS) surrounding electroactive cells. In this study, the response of Geobacter biofilms to anode potentials was investigated with a special emphasis on the mechanistic role of EPS. The electrochemical activities and cell viabilities of Geobacter soli biofilms were simultaneously attenuated at 0.4 and 0.6 V compared to -0.2 and 0 V. It was found that the biofilms (especially the biofilm region closer to electrode surface) grown at -0.2 and 0 V produced relatively more extracellular redox-active proteins and less extracellular polysaccharides, which conferred higher electron accepting/donating capacities to EPS and consequently facilitated EET. Meanwhile, electrically nonconductive extracellular polysaccharide-dominated interior layers were formed in the biofilms grown at 0.4 and 0.6 V, which limited direct EET but might serve as physical barriers for protecting cells in these biofilms from the increasing stress by poised electrodes. These results demonstrated that the production of EPS under different anode potentials might be finely regulated by cells to keep balance between EET efficiency and cell-protection. This study provides a new insight to investigate the Geobacter biofilms coping with various environments, and is useful for optimizing electrochemical activity of anode biofilms.

Behavior of two-chamber microbial electrochemical systems started-up with different ion-exchange membrane separators

In this study, microbial fuel cells (MFCs) - operated with novel cation- and anion-exchange membranes, in particular AN-VPA 60 (CEM) and PSEBS DABCO (AEM) - were assessed comparatively with Nafion proton exchange membrane (PEM). The process characterization involved versatile electrochemical (polarization, electrochemical impedance spectroscopy - EIS, cyclic voltammetry - CV) and biological (microbial structure analysis) methods in order to reveal the influence of membrane-type during start-up. In fact, the use of AEM led to 2-5 times higher energy yields than CEM and PEM and the lowest MFC internal resistance (148 ± 17 Ω) by the end of start-up. Regardless of the membrane-type, Geobacter was dominantly enriched on all anodes. Besides, CV and EIS measurements implied higher anode surface coverage of redox compounds for MFCs and lower membrane resistance with AEM, respectively. As a result, AEM based on PSEBS DABCO could be found as a promising material to substitute Nafion.

Long-Term Behavior of Defined Mixed Cultures of Geobacter sulfurreducens and Shewanella oneidensis in Bioelectrochemical Systems

This work aims to investigate the long-term behavior of interactions of electrochemically active bacteria in bioelectrochemical systems. The electrochemical performance and biofilm characteristics of pure cultures of Geobacter sulfurreducens and Shewanella oneidensis are being compared to a defined mixed culture of both organisms. While S. oneidensis pure cultures did not form cohesive and stable biofilms on graphite anodes and only yielded 0.034 ± 0.011 mA/cm² as maximum current density by feeding of each 5 mM lactate and acetate, G. sulfurreducens pure cultures formed 69 μm thick, area-wide biofilms with 10 mM acetate as initial substrate concentration and yielded a current of 0.39 ± 0.09 mA/cm². Compared to the latter, a defined mixed culture of both species was able to yield 38% higher maximum current densities of 0.54 ± 0.07 mA/cm² with each 5 mM lactate and acetate. This increase in current density was associated with a likewise increased thickness of the anodic biofilm to approximately 93 μm. It was further investigated whether a sessile incorporation of S. oneidensis into the mixed culture biofilm, which has been reported previously for short-term experiments, is long-term stable. The results demonstrate that S. oneidensis was not stably incorporated into the biofilm; rather, the planktonic presence of S. oneidensis has a positive effect on the biofilm growth of G. sulfurreducens and thus on current production.

Evaluation of Inlet Design and Flow Rate Effect on Current Density Distribution in a Microbial Electrolysis Cell Using Computational Simulation Techniques, Coupling Hydrodynamics and Bioanode Kinetics

A theoretical model that describe the effect of design and operational conditions on current density distribution in a bioelectrochemical reactor used as microbial electrolysis cell (MEC) is described in this study. This model is proposed considering an approach where a direct electron transfer mechanism from the biofilm to the electrode surface takes place (mechanism present in most of microbial systems) and is governed by a dual donor-acceptor Nernst-Monod bioelectrochemical kinetic expression. The bioelectrochemical reactor is modelled considering two flow electrochemical reactor designs (a reactor design based in literature reports and a modified system proposed by the authors) operating at different flow inlet velocities and electrical overpotentials.

Results obtained from the numerical solution shows that flow distribution is an essential aspect that impact the reactor performance, since concentration profiles and electrical potential-current distributions are strongly dependent on flow regime. Modified inlet configuration displays a more homogeneous fluid distribution and this behavior directly affects the mass transport and current density performance, as a result higher current density values are obtained for such configuration. Finally, it is expected that the information obtained from the analysis carried out in this report will provide us with a theoretical basis to realize the construction of a bioelectrochemical reactor prototype to develop the MEC concept.

Accelerating the start-up of the cathodic biofilm by adding acyl-homoserine lactone signaling molecules

Electroactive biofilms (EABs) are essential for bioelectrochemical systems, however, the formation of cathodic EABs is more time-consuming than anodic EABs. This study aims to evaluate whether acyl-homoserine lactones (AHLs) could facilitate the start-up of cathodic Geobacter soli EABs. With AHL addition, the biomass, cell viability, and extracellular polymeric substance (EPS) abundance of cathode-associated G. soli EABs were increased. Likewise, redox activities of EPS and outermost proteins in the cathodic EABs were enhanced in the presence of AHLs, which consequently led to better start-up performance of biofilms. Compared to the control without AHLs, start-up lag periods were reduced by approximately 50%, electron uptakes were enhanced by 1.3-2.0 times, and denitrification rates were more than doubled with AHL addition in the start-up cycle, which were comparable to those of mature G. soli cathodic EABs. These findings open up an opportunity for accelerating the start-up of cathodic biofilms via AHLs.

Impact of electrode micro- and nano-scale topography on the formation and performance of microbial electrodes

From a fundamental standpoint, microbial electrochemistry is unravelling a thrilling link between life and materials. Technically, it may be the source of a large number of new processes such as microbial fuel cells for powering remote sensors, autonomous sensors, microbial electrolysers and equipment for effluent treatment. Microbial electron transfers are also involved in many natural processes such as biocorrosion. In these contexts, a huge number of studies have dealt with the impact of electrode materials, coatings and surface functionalizations but very few have focused on the effect of the surface topography, although it has often been pointed out as a key parameter impacting the performance of electroactive biofilms. The first part of the review gives an overview of the influence of electrode topography on abiotic electrochemical reactions. The second part recalls some basics of the effect of surface topography on bacterial adhesion and biofilm formation, in a broad domain reaching beyond the context of electroactivity. On these well-established bases, the effect of surface topography is reviewed and analysed in the field of electroactive biofilms. General trends are extracted and fundamental questions are pointed out, which should be addressed to boost future research endeavours. The objective is to provide basic guidelines useful to the widest possible range of research communities so that they can exploit surface topography as a powerful lever to improve, or to mitigate in the case of biocorrosion for instance, the performance of electrode/biofilm interfaces.

Electrical current generation in microbial electrolysis cells by hyperthermophilic archaea Ferroglobus placidus and Geoglobus ahangari

Few microorganisms have been examined for current generation under thermophilic (40-65°C) or hyperthermophilic temperatures (≥80°C) in microbial electrochemical systems. Two iron-reducing archaea from the family Archaeoglobaceae, Ferroglobus placidus and Geoglobus ahangari, showed electro-active behavior leading to current generation at hyperthermophilic temperatures in single-chamber microbial electrolysis cells (MECs). A current density (j) of 0.68±0.11A/m² was attained in F. placidus MECs at 85°C, and 0.57±0.10A/m² in G. ahangari MECs at 80°C, with an applied voltage of 0.7V. Cyclic voltammetry (CV) showed that both strains produced a sigmoidal catalytic wave, with a mid-point potential of -0.39V (vs. Ag/AgCl) for F. placidus and -0.37V for G. ahangari. The comparison of CVs using spent medium and turnover CVs, coupled with the detection of peaks at the same potentials in both turnover and non-turnover conditions, suggested that mediators were not used for electron transfer and that both archaea produced current through direct contact with the electrode. These two archaeal species, and other hyperthermophilic exoelectrogens, have the potential to broaden the applications of microbial electrochemical technologies for producing biofuels and other bioelectrochemical products under extreme environmental conditions.

The impact of electron donors and anode potentials on the anode-respiring bacteria community

Both anode potentials and substrates can affect the process of biofilm formation in bioelectrochemical systems, but it is unclear who primarily determine the anode-respiring bacteria (ARB) community structure and composition. To address this issue, we divided microbial electrolysis cells (MECs) into groups, feeding them with different substrates and culturing them at various potentials. Non-turnover cyclic voltammetry indicated that the extracellular electron transfer components were uniform when feeding acetate, because the same oxidation peaks occurred at - 0.36 ± 0.01 and - 0.17 ± 0.01 V (vs. Ag/AgCl). Illumina MiSeq sequencing revealed that the dominating ARB was Geobacter, which did not change with different potentials. When the MECs were cultured with sucrose and mixed substrates, oxidation peak P3 (- 0.29 ± 0.015 V) occurred at potentials of - 0.29 and 0.01 V. This may be because of the appearance of Unclassified_AKYG597. In addition, oxidation peak P4 (- 0.99 ± 0.01 V) occurred at high and low potentials (0.61 and - 0.45 V, respectively), and the maximum current densities were far below those of the middle potentials. Illumina MiSeq sequencing showed that fermentation microorganisms (Lactococcus and Sphaerochaeta) dominated the biofilms. Consequently, substrate primarily determined the dominating ARB, and Geobacter invariably dominated the acetate-fed biofilms with potentials changed. Conversely, different potentials mainly affected fermentable substrate-fed biofilms, with dominating ARB turning into Unclassified_AKYG59.

Microbial fuel cells: From fundamentals to applications. A review

In the past 10-15 years, the microbial fuel cell (MFC) technology has captured the attention of the scientific community for the possibility of transforming organic waste directly into electricity through microbially catalyzed anodic, and microbial/enzymatic/abiotic cathodic electrochemical reactions. In this review, several aspects of the technology are considered. Firstly, a brief history of abiotic to biological fuel cells and subsequently, microbial fuel cells is presented. Secondly, the development of the concept of microbial fuel cell into a wider range of derivative technologies, called bioelectrochemical systems, is described introducing briefly microbial electrolysis cells, microbial desalination cells and microbial electrosynthesis cells. The focus is then shifted to electroactive biofilms and electron transfer mechanisms involved with solid electrodes. Carbonaceous and metallic anode materials are then introduced, followed by an explanation of the electro catalysis of the oxygen reduction reaction and its behavior in neutral media, from recent studies. Cathode catalysts based on carbonaceous, platinum-group metal and platinum-group-metal-free materials are presented, along with membrane materials with a view to future directions. Finally, microbial fuel cell practical implementation, through the utilization of energy output for practical applications, is described.

Microbial polychlorinated biphenyl dechlorination in sediments by electrical stimulation: The effect of adding acetate and nonionic surfactant

The necessity for developing an efficient and cost-effective in situ bioremediation technology for sediments contaminated with polychlorinated biphenyls (PCBs) has prompted the application of low-voltage electrical fields to anaerobic digestion systems. Here we show that the use of a sediment-based bio-electrochemical reactor (BER) poised at a potential of -0.50V (vs. a standard calomel electrode, SCE) substantially enhanced the reduction of 2,3,4,5-tetrachlorobiphenyl (PCB 61) when acetate was added as a carbon source. The addition of surfactant Tween 80 to the BER further accelerated the PCB 61 transformation. The comparative study of closed- and open-circuit reactors demonstrated the enrichment conditions affecting the bacterial community structure, the dominant dechlorination metabolisms, and thus the extent, the rate and the products of the reduction of PCBs. The dominant bacterial dechlorinators detected in the BERs in the presence of acetate and Tween 80 are Dehalogenimonas, Dehalobacter, Sulfuricurvum, Dechloromonas and Geobacter, which should be responsible for PCB dechlorination. This study improves understanding of the key factors influencing dechlorination activity in sediment-based BERs polarized at a low potential, as well as the metabolic mechanisms dominating in the PCB dechlorination process.

Influence of Anode Potentials on Current Generation and Extracellular Electron Transfer Paths of Geobacter Species

Geobacter species are capable of utilizing solid-state compounds, including anodic electrodes, as electron acceptors of respiration via extracellular electron transfer (EET) and have attracted considerable attention for their crucial role as biocatalysts of bioelectrochemical systems (BES’s). Recent studies disclosed that anode potentials affect power output and anodic microbial communities, including selection of dominant Geobacter species, in various BES’s. However, the details in current-generating properties and responses to anode potentials have been investigated only for a model species, namely Geobacter sulfurreducens. In this study, the effects of anode potentials on the current generation and the EET paths were investigated by cultivating six Geobacter species with different anode potentials, followed by electrochemical analyses. The electrochemical cultivation demonstrated that the G. metallireducens clade species (G. sulfurreducens and G. metallireducens) constantly generate high current densities at a wide range of anode potentials (≥−0.3 or −0.2 V vs. Ag/AgCl), while the subsurface clades species (G. daltonii, G. bemidjensis, G. chapellei, and G. pelophilus) generate a relatively large current only at limited potential regions (−0.1 to −0.3 V vs. Ag/AgCl). The linear sweep voltammetry analyses indicated that the G. metallireducens clade species utilize only one EET path irrespective of the anode potentials, while the subsurface clades species utilize multiple EET paths, which can be optimized depending on the anode potentials. These results clearly demonstrate that the response features to anode potentials are divergent among species (or clades) of Geobacter.

Set anode potentials affect the electron fluxes and microbial community structure in propionate-fed microbial electrolysis cells

Anode potential has been shown to be a critical factor in the rate of acetate removal in microbial electrolysis cells (MECs), but studies with fermentable substrates and set potentials are lacking. Here, we examined the impact of three different set anode potentials (SAPs; −0.25, 0, and 0.25 V vs. standard hydrogen electrode) on the electrochemical performance, electron flux to various sinks, and anodic microbial community structure in two-chambered MECs fed with propionate. Electrical current (49–71%) and CH₄ (22.9–41%) were the largest electron sinks regardless of the potentials tested. Among the three SAPs tested, 0 V showed the highest electron flux to electrical current (71 ± 5%) and the lowest flux to CH₄ (22.9 ± 1.2%). In contrast, the SAP of −0.25 V had the lowest electron flux to current (49 ± 6%) and the highest flux to CH₄ (41.1 ± 2%). The most dominant genera detected on the anode of all three SAPs based on 16S rRNA gene sequencing were Geobacter, Smithella and Syntrophobacter, but their relative abundance varied among the tested SAPs. Microbial community analysis implies that complete degradation of propionate in all the tested SAPs was facilitated by syntrophic interactions between fermenters and Geobacter at the anode and ferementers and hydrogenotrophic methanogens in suspension.

Effect of Graphene-Graphene Oxide Modified Anode on the Performance of Microbial Fuel Cell

The inferior hydrophilicity of graphene is an adverse factor to the performance of the graphene modified anodes (G anodes) in microbial fuel cells (MFCs). In this paper, different amounts of hydrophilic graphene oxide (GO) were doped into the modification layers to elevate the hydrophilicity of the G anodes so as to further improve their performance. Increasing the GO doped ratio from 0.15 mg·mg⁻¹ to 0.2 mg·mg⁻¹ and 0.25 mg·mg⁻¹, the static water contact angle (θ_c) of the G-GO anodes decreased from 74.2 ± 0.52° to 64.6 ± 2.75° and 41.7 ± 3.69°, respectively. The G-GO_0.2 anode with GO doped ratio of 0.2 mg·mg⁻¹ exhibited the optimal performance and the maximum power density (P_max) of the corresponding MFC was 1100.18 mW·m⁻², 1.51 times higher than that of the MFC with the G anode.

Enhanced anaerobic dechlorination of polychlorinated biphenyl in sediments by bioanode stimulation

The application of a low-voltage electric field as an electron donor or acceptor to promote the bioremediation of chlorinated organic compounds represents a promising technology meeting the demand of developing an efficient and cost-effective strategy for in situ treatment of PCB-contaminated sediments. Here, we reported that bioanode stimulation with an anodic potential markedly enhanced dechlorination of 2,3,4,5-tetrachlorobiphenyl (PCB 61) contained in the sediment at an electronic waste recycling site of Qingyuan, Guangdong, China. The 110-day incubation of the bioanode with a potential poised at 0.2 V relative to saturated calomel electrode enabled 58% transformation of the total PCB 61 at the initial concentration of 100 μmol kg(-1), while only 23% was reduced in the open-circuit reference experiment. The introduction of acetate to the bioelectrochemical reactor (BER) further improved PCB 61 transformation to 82%. Analysis of the bacterial composition showed significant community shifts in response to variations in treatment. At phylum level, the bioanode stimulation resulted in substantially increased abundance of Actinobacteria, Bacteroidetes, and Chloroflexi either capable of PCB dechlorination, or detected in the PCB-contaminated environment. At genus level, the BER contained two types of microorganisms: electrochemically active bacteria (EAB) represented by Geobacter, Ignavibacterium, and Dysgonomonas, and dechlorinating bacteria including Hydrogenophaga, Alcanivorax, Sedimentibacter, Dehalogenimonas, Comamonas and Vibrio. These results suggest that the presence of EAB can promote the population of dechlorinating bacteria which are responsible for PCB 61 transformation.

Enhanced methane production in an anaerobic digestion and microbial electrolysis cell coupled system with co-cultivation of Geobacter and Methanosarcina

The anaerobic digestion (AD) and microbial electrolysis cell (MEC) coupled system has been proved to be a promising process for biomethane production. In this paper, it was found that by co-cultivating Geobacter with Methanosarcina in an AD-MEC coupled system, methane yield was further increased by 24.1%, achieving to 360.2 mL/g-COD, which was comparable to the theoretical methane yield of an anaerobic digester. With the presence of Geobacter, the maximum chemical oxygen demand (COD) removal rate (216.8 mg COD/(L·hr)) and current density (304.3A/m(3)) were both increased by 1.3 and 1.8 fold compared to the previous study without Geobacter, resulting in overall energy efficiency reaching up to 74.6%. Community analysis demonstrated that Geobacter and Methanosarcina could coexist together in the biofilm, and the electrochemical activities of both were confirmed by cyclic voltammetry. Our study observed that the carbon dioxide content in total gas generated from the AD reactor with Geobacter was only half of that generated from the same reactor without Geobacter, suggesting that Methanosarcina may obtain the electron transferred from Geobacter for the reduction of carbon dioxide to methane. Taken together, Geobacter not only can improve the performance of the MEC system, but also can enhance methane production.

Thermally activated long range electron transport in living biofilms

Microbial biofilms grown utilizing electrodes as metabolic electron acceptors or donors are a new class of biomaterials with distinct electronic properties. Here we report that electron transport through living electrode-grown Geobacter sulfurreducens biofilms is a thermally activated process with incoherent redox conductivity. The temperature dependency of this process is consistent with electron-transfer reactions involving hemes of c-type cytochromes known to play important roles in G. sulfurreducens extracellular electron transport. While incoherent redox conductivity is ubiquitous in biological systems at molecular-length scales, it is unprecedented over distances it appears to occur through living G. sulfurreducens biofilms, which can exceed 100 microns in thickness.

Multi-system Nernst-Michaelis-Menten model applied to bioanodes formed from sewage sludge

Bioanodes were formed under constant polarization at -0.2 V/SCE from fermented sewage sludge. Current densities reached were 9.3±1.2 A m(-2) with the whole fermented sludge and 6.2±0.9 A m(-2) with the fermented sludge supernatant. The bioanode kinetics was analysed by differentiating among the contributions of the three redox systems identified by voltammetry. Each system ensured reversible Nernstian electron transfer but around a different central potential. The global overpotential required to reach the maximum current plateau was not imposed by slow electron transfer rates but was due to the potential range covered by the different redox systems. The microbial communities of the three bioanodes were analysed by 16S rRNA gene pyrosequencing. They showed a significant microbial diversity around a core of Desulfuromonadales, the proportion of which was correlated with the electrochemical performance of the bioanodes.

Effects of constant or dynamic low anode potentials on microbial community development in bioelectrochemical systems

In bioelectrochemical systems, exoelectrogenic bacteria respire with anode electrodes as their extracellular electron acceptor; therefore, lower anode potentials can reduce the energy gain to each microbe and select against ones that are not able to respire at a lower potential range. Often fully developed anode communities are compared across bioelectrochemical systems with set anode potentials or fixed external resistances as different operational conditions. However, the comparative effect of the resulting constantly low versus dynamically low anode potentials on the development of anode microbial communities as well as the final cathode microbial communities has not been directly demonstrated. In this study, we used a low fixed anode potential of -250 mV and a higher-current control potential of -119 mV vs. Standard Hydrogen Electrode to approximately correspond with the negative peak anode potential values obtained from microbial fuel cells operated with fixed external resistances of 1 kΩ and 47 Ω, respectively. Pyrosequencing data from a 2-month time series show that a lower set anode potential resulted in a more diverse community than the higher- and variable-potential systems, likely due to the hindered enrichment of a Geobacter-dominated community with limited energy gain at this set potential. In this case, it appears that the selective pressure caused by the low set potential was counteracted by the low energy gain over a 2-month time scale. The air cathode microbial community with constant low anode potentials showed delayed enrichment of denitrifiers or perchlorate-reducing bacteria compared to the fixed external resistance condition.

Comparison of synthetic medium and wastewater used as dilution medium to design scalable microbial anodes: Application to food waste treatment

The objective was to replace synthetic medium by wastewater as a strategy to design low-cost scalable bioanodes. The addition of activated sludge was necessary to form primary bioanodes that were then used as the inoculum to form the secondary bioanodes. Bioanodes formed in synthetic medium with acetate 10mM provided current densities of 21.9±2.1A/m(2), while bioanodes formed in wastewater gave 10.3±0.1A/m(2). The difference was explained in terms of biofilm structure, electrochemical kinetics and redox charge content of the biofilms. In both media, current densities were straightforwardly correlated with the biofilm enrichment in Geobacteraceae but, inside this family, Geobacter sulfurreducens and an uncultured Geobacter sp. were dominant in the synthetic medium, while growth of another Geobacter sp. was favoured in wastewater. Finally, the primary/secondary procedure succeeded in designing bioanodes to treat food wastes by using wastewater as dilution medium, with current densities of 7±1.1A/m(2).

Electricity generation from sulfide tailings using a double-chamber microbial fuel cell

Pyrrhotite tailings have the potential to drive electricity generation accompanied by microbial leaching of valuable metals using the double-chamber MFC reactor.