High-Performance Symmetrical Supercapacitor with a Combination of a ZIF-67/rGO Composite Electrode and a Redox Additive Electrolyte

Chitosan adorned with ZIF-67 on ZIF-8 biocomposite: A potential LED visible light-assisted photocatalyst for wastewater decontamination

The current investigation has utilized a simple and constructive stratified method to synthesize a binary (Cs/Z-8: chitosan (Cs) and zeolitic imidazolate framework-8 (Z-8)) and ternary Cs/Z-8/Z-67 (Z-67: ZIF-67) biocomposites at room temperature. A certain amount of Cs/Z-8 (0.05, 0.1, and 0.2 g) was used to prepare ternary biocomposites (denoted as Cs/Z-8/Z-67-0.05, Cs/Z-8/Z-67-0.1, and Cs/Z-8/Z-67-0.2, respectively). The synthesized materials were characterized. Through the adornment Cs, a non-toxic biopolymer, with Z-8 and Z-67, the desired efficacy in removing pollutants (TCN: Tetracycline, AB92: Acid Blue 92, and MB: Methylene Blue) was achieved under LED visible light. TCN removal in the presence of visible light by Cs, Z-8, Cs/Z-8, Cs/Z-8/Z-67-0.05, Cs/Z-8/Z-67-0.1, and Cs/Z-8/Z-67-0.2 was 22.6 %, 47.3 %, 69.0 %, 77.0 %, 95.5 %, and 65.0 %, respectively. The trapping test showed that TCN degradation by adding ascorbic acid, methanol, and IPA was 44.8 %, 66.9 %, and 78.5 %, respectively. It could be concluded that the O2- play the decisive role for the destruction of TCN. The reusability of Cs/Z-8/Z-67-0.1 as a photocatalyst indicated that it had the capability to preserve its stability and performance for three successive cycles of use (95.5 %, 89.0 %, and 84.0 %). Also, Cs/Z-8/Z-67 had dye degradation ability (39.0 % for Methylene Blue and 81.0 % for Acid Blue 92).

Topotactic transformation of zeolitic imidazolate frameworks into high-performance battery type electrodes for supercapattery application

Supercapacitors (SCs) are well recognized for their excessive power output and cycling stability, but they often suffer from limited energy density. A promising solution to this challenge is the hybrid supercapattery (HSC) concept, which integrates two different electrodes with disparate charge-storage systems to provide energy and power. In this work, transition-metal phosphides (TMPs), specifically a Cu-doped cobalt phosphide wrapped with an N-doped porous carbon network (CCP-NPC), were used as positive electrode materials in HSCs. With a specific capacitance of 5.99 F cm-2 and a capacitance retention of 87% after 10 000 cycles, the extremely active CCP-5-NPC (5% Cu-doped cobalt phosphide wrapped with an N-doped porous carbon network) exhibits numerous redox sites. The unique structure of CCP-5-NPC, characterized by its cubical shape, coarse surface, and porous structure, greatly enhances the electrochemically active sites (EAS) and specific surface areas (SSA) of the electrode material, facilitating efficient charge transfer kinetics for ions and electrons in HSCs. The potential hybrid supercapattery (CCP-5-NPC||r-GO device) also demonstrated a higher energy density of 0.563 mW h cm-2 at a power density of 4.8 mW cm-2 at 3 mA cm-2 and a cyclic stability of 87.7% after 10 000 cycles. This work provides a basis for the development of highly efficient HSCs in the future by topotactically converting extremely porous materials into energy storage devices.

Hybridization of metal-organic frameworks and MXenes: Expanding horizons in supercapacitor applications

Metal-organic frameworks (MOFs) and MXenes have gained prominence in the queue of advanced material research. Both materials' outstanding physical and chemical characteristics prominently promote their utilization in diverse fields, especially the electrochemical energy storage (EES) domain. The collective contribution of extremely high specific surface area (SSA), customizable pores, and abundant active sites propose MOFs as integral materials for EES devices. However, conventional MOFs endure low conductivity, constraining their utility in practical applications. The development of hybrid materials via integrating MOFs with various conductive materials stands out as an effective approach to improvising MOF's conductivity. MXenes, formulated as two-dimensional (2D) carbides and nitrides of transition metals, fall in the category of the latest 2D materials. MXenes possess extensive structural diversity, impressive conductivity, and rich surface chemical characteristics. The electrochemical characteristics of MOF@MXene hybrids outperform MOFs and MXenes individually, credited to the synergistic effect of both components. Additionally, the MOF derivatives coupled with MXene, exhibiting unique morphologies, demonstrate outstanding electrochemical performance. The important attributes of MOF@MXene hybrids, including the various synthesis protocols, have been summarized in this review. This review delves into the architectural analysis of both MOFs and MXenes, along with their advanced hybrids. Furthermore, the comprehensive survey of the latest advancements in MOF@MXene hybrids as electroactive material for supercapacitors (SCs) is the prime objective of this review. The review concludes with an elaborate discussion of the current challenges faced and the future outlooks for optimizing MOF@MXene composites.

In Situ Construction of Highly Dispersed Pd on Cobalt Nanoparticle on Hollow Functional Cubic Graphene by Double Framework for ORR

Developing advanced functional carbon materials is essential for electrocatalysis, caused by their vast merits for boosting many key energy conversion reactions. Herein, the covalent organic frameworks (COFs) is utilized on metal-organic frameworks (MOFs) as the template, under the controllable metal atoms thermal migration process successfully in situ constructs Pd-Co alloy nanoparticles on hollow cubic graphene. The electrocatalytic oxygen reduction reaction (ORR) evaluation showed excellent performances with a half-wave potential of 0.866 V, and a limited current density of 4.975 mA cm-2, that superior to the commercial Pt/C and Co nanoparticles. The contrast experiments and X-ray absorption spectrum demonstrated the aggregated electrons at highly dispersed Pd atoms on Co nanoparticle that promoted the main activities. This work not only enlightens the novel carbon materials designing strategies but also suggests heterogeneous electrocatalysis.

Sustainable ZIF-67/Mo-MXene-Derived Nanoarchitecture Synthesis: An Enhanced Durable Performance of Lithium-Selenium Batteries

Selenium-based electrodes have garnered attention for their high electrical conductivity, compatibility with carbonate electrolytes, and volumetric capacity comparable to sulfur electrodes. However, real-time application is hindered by rapid capacity deterioration from the "shuttle effect" of polyselenides and volume fluctuations. To address these challenges, a hybrid Se@ZIF-67/Mo-MXene-derived (Se@Co-NC/Mo2C) nanoarchitecture is developed via an economically viable in situ electrostatic self-assembly of ZIF-67 and Mo2C nanosheets. The catalytic effects and porous framework of Co-NC/Mo2C enhance electrode attributes, promoting superior adsorption and conversion of lithium polyselenides and facile ion/electron transport within the electrode, resulting in stable electrochemical performance. Lithium-selenium batteries (LSeBs) exhibit remarkable characteristics, boasting high specific capacity and exceptional durability. The Se@Co-NC/Mo2C electrode delivers a reversible capacity of 503.5 mAh g-1 at 0.5 C with 98% capacity retention, 100% Coulombic efficiency, and exceptional cyclic durability through 8600 cycles. In sustainability tests at 10C/1C charging/discharging, the Se@Co-NC/Mo2C electrode demonstrates an optimistic and stable capacity of ≈370.6 mAh g-1 with 93% capacity retention at the 3100th cycle in a carbonate-based electrolyte and ≈181.3 mAh g-1 with 92% capacity retention after 5000 cycles in an ether-based electrolyte, indicating exceptional stability for practical rechargeable batteries. This cost-effective and efficient approach holds significant potential for high-performance and durable LSeBs.

Activation of peroxymonosulfate with ZIF-67-derived Co/N-doped porous carbon nanocubes for the degradation of Congo red dye

In this study, porous carbon nanocubes encapsulated magnetic metallic Co nanoparticles (denoted as Co@N-PCNC) was prepared via pyrolyzing ZIF-67 nanocubes precursor at 600 °C and characterized by various technologies. It was used to activate peroxymonosulfate (PMS) to degrade Congo red (CR) dye efficiently. Over 98.45% of 50 mg L-1 CR was degraded using 0.033 mM PMS activated by 75 mg L-1 Co@N-PCNC within 12 min. The free radical quenching experiments were performed to reveal the nature of the reactive oxygen species radicals generated throughout the catalytic oxidation of CR. The effects of common inorganic anions and the water matrix on CR removal were studied. Moreover, the results of the kinetic study revealed the suitability of the pseudo-first-order and Langmuir-Hinshelwood kinetic models for illustrating CR degradation using the Co@N-PCNC/PMS system. Ultimately, the Co@N-PCNC displayed good operational stability, and after five cycles, the CR removal rate can still maintain over 90% after 12 min.

In-situ growth of MOF-derived Co3S4@MoS2 heterostructured electrocatalyst for the detection of furazolidone

The over-exploitation of antibiotics in food and farming industries ruined the environmental and human health. Consequently, electrochemical sensors offer significant advantages in monitoring these compounds with high accuracy. Herein, MOF-derived hollow Co3S4@MoS2 (CS@MS) heterostructure has been prepared hydrothermally and applied to fabricate an electrochemical sensor to monitor nitrofuran class antibiotic drug. Various spectroscopic methodologies have been employed to elucidate the structural and morphological information. Our prepared electrocatalyst has better electrocatalytic performance than bare and other modified glassy carbon electrodes (GCE). Our CS@MS/GCE sensor exhibited a highly sensitive detection by offering a low limit of detection, good sensitivity, repeatability, reproducibility, and stability results. In addition, our sensor has shown a good selectivity towards the target analyte among other potential interferons. The practical reliability of the sensor was measured by analyzing various real-time environmental and biological samples and obtaining good recovery values. From the results, our fabricated CS@MS could be an active electrocatalyst material for an efficient electrochemical sensing application.

Binder-Free CNT-Modified Excellent Electrodes for All-Vanadium Redox Flow Batteries

Electrodes are one of the key components that influence the performance of all-vanadium redox flow batteries (VRFBs). A porous graphite felt with modified fiber surfaces that can provide a high specific activation surface is preferred as the electrode of a VRFB. In this study, a simple binder-free approach is developed for preparing stable carbon nanotube modified graphite felt electrodes (CNT-GFs). Heat-treated graphite felt electrodes (H-GFs) are dip-coated using CNT homogeneous solution. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) results conclude that CNT-GFs have less resistance, better reaction currents, and reversibility as compared to H-GF. Cell performances showed that CNT-GFs significantly improve the performance of a VRFB, especially for the CNT-GF served in the positive side of the VRFB. CNT presence increases the electrochemical properties of the graphite electrode; as a result, reaction kinetics for both VO2+/VO2+ and V3+/V2+ are improved. Positive CNT-GF (P-CNT-GF) configured VRFB exhibits voltage efficiency, coulombic efficiency, and energy efficiency of 85%, 97%, and 82%, respectively, at the operating current density of 100 mA cm-2. At high current density of 200 mA cm-2, the VRFB with P-CNT-GF shows 73%, 98%, and 72% of the voltage, coulombic, and energy efficiencies, respectively. The energy efficiency of the CNT-GF is 6% higher when compared with that of B-H-GF. The VRFB with CNT-GF can provide stable performance for 300 cycles at 200 mA cm-2.

Synthesis of Metal-Organic Framework-Based ZIF-8@ZIF-67 Nanocomposites for Antibiotic Decomposition and Antibacterial Activities

Toxic antibiotic effluents and antibiotic-resistant bacteria constitute a threat to global health. So, scientists are investigating high-performance materials for antibiotic decomposition and antibacterial activities. In this novel research work, we have successfully designed ZIF-8@ZIF-67 nanocomposites via sol-gel and solvothermal approaches. The ZIF-8@ZIF-67 nanocomposite is characterized by various techniques that exhibit superior surface area enhancement, charge separation, and high light absorption performance. Yet, ZIF-8 has high adsorption rates and active sites, while ZIF-67 has larger pore volume and efficient adsorption and reaction capabilities, demonstrating that the ZIF-8@ZIF-67 nanocomposite outperforms pristine ZIF-8 and ZIF-67. Compared with pristine ZIF-8 and ZIF-67, the most active 6ZIF-67@ZIF-8 nanocomposite showed higher decomposition efficacy for ciprofloxacin (65%), levofloxacin (54%), and ofloxacin (48%). Scavenger experiments confirmed that •OH, •O2-, and h+ are the most active species for the decomposition of ciprofloxacin (CIP), levofloxacin (LF), and ofloxacin (OFX), respectively. In addition, the 6ZIF-67/ZIF-8 nanocomposite suggested its potential applications in Escherichia coli for growth inhibition zone, antibacterial activity, and decreased viability. Moreover, the stability test and decomposition pathway of CIP, LF, and OFX were also proposed. Finally, our study aims to enhance the efficiency and stability of ZIF-8@ZIF-67 nanocomposite and potentially enable its applications in antibiotic decomposition, antibacterial activities, and environmental remediation.

In situ Growth of Zeolite Imidazole Frameworks (ZIF-67) on Carbon Cloth for the Application of Oxygen Reduction Reactions and Microbial Fuel Cells

Developing high surface area catalysts is an effective strategy to enhance the oxygen reduction reaction (ORR) in the application of microbial fuel cells (MFCs). This can be achieved by developing a catalyst based on metal-organic frameworks (MOFs) because they offer a porous active site for ORR. In this work, a novel in situ growth of 2D shell nanowires of ZIF-67 as a template for N-doped carbon (Co/NC) via a carbonization route was developed to enhance the ORR performance. The effects of different reaction times and different annealing temperatures were studied for a better ORR activity. The growth of the MOF template on the carbon cloth was confirmed using scanning electron microscopy, field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Fourier transform infrared. The Co/NC-800 exhibited an enhancement in the ORR activity as evidenced by an onset potential and half-wave potential of 0.0 vs V Ag/AgCl and -0.1 vs V Ag/AgCl, respectively, with a limited current density exceeding the commercial Pt/C. Operating Co/NC-800 on MFC revealed a maximum power density of 30 ± 2.5 mW/m2, a maximum current density of 180 ± 2.5 mA/m2.

A zeolitic imidazolate framework (ZIF-67) and graphitic carbon nitride (g-C3N4) composite based efficient electrocatalyst for overall water-splitting reaction

Designing of non-noble, cost-effective, sustainable catalysts for water splitting is essential for hydrogen production. In this research work, ZIF-67, g-C3N4, and their composite (1, 3, 5, 6, 8 wt% g-C3N4@ZIF-67) are synthesized, and various techniques, XRD, FTIR, SEM, EDX and BET are used to examine their morphological properties for electrochemical water-splitting. The linkage of ZIF-67 with g-C3N4 synergistically improves the electrochemical kinetics. An appropriate integration of g-C3N4 in ZIF-67 MOF improves the charge transfer between the electrode and electrolyte and makes it a suitable option for electrochemical applications. In alkaline media, the composite of ZIF-67 MOF with g-C3N4 over a Ni-foam exhibits a superior catalyst activity for water splitting application. Significantly, the 3 wt% g-C3N4@ZIF67 composite material reveals remarkable results with low overpotential values of -176 mV@10 mA cm-2, 152 mV@10 mA cm-2 for HER and OER. The catalyst remained stable for 24 h without distortion. The 3 wt% composite also shows a commendable performance for overall water-splitting with a voltage yield of 1.34 v@10 mA cm-2. The low contact angle (54.4°) proves the electrocatalyst's hydrophilic nature. The results of electrochemical water splitting illustrated that 3 wt% g-C3N4@ZIF-67 is an electrically conductive, stable, and hydrophilic-nature catalyst and is suggested to be a promising candidate for electrochemical water-splitting application.

Activation of Peroxymonosulfate with ZIF-67-derived Co/N-doped Porous Carbon Nanocubes for the Degradation of Congo Red Dye.. [DOI: 10.21203/rs.3.rs-3174583/v1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

In this study, porous carbon nanaocubes encapsulated magnetic metallic Co nanoparticles (denoted as Co@N-PCNC) was prepared via pyrolyzing ZIF-67 nanocubes precursor at 600°C, and characterized by various technologies. It was used to activate peroxymonosulfate (PMS) to degrade Congo red (CR) dye efficiently. Over 98.45% of 50 mg/L CR with initial pH of 5.5 was degraded by 100 mg/L PMS activated by 10 mg/L Co@N-C within 12 min. The free radical quenching experiments were performed to reveal the nature of the reactive oxygen species radicals generated throughout the catalytic oxidation of CR. The effects of common inorganic anions and water matrix on CR removal were studied. The Co@N-PCNC displayed good operational stability, and after three cycles, the CR removal rate can still maintain over 90% after 12 min reaction.

High-performance electrode of ZIF-67 metal-organic framework (MOF) loaded laser-induced graphene (LIG) composite for all-solid-state supercapacitor

This work demonstrates a facile and efficient methodology to synthesize a composite material of zeolitic imidazolate frameworks (ZIFs) and laser-induced graphene (LIG). This ZIF-67 loaded LIG composite (ZIF-67/LIG) has been adequately characterized for its morphology and structure, and its electrochemical performance has been specifically examined. As supercapacitors (SCs) electrode material, the ZIF-67/LIG composite exhibits superb electrochemical performance, owing to the inherent high porosity, abundant active sites, large specific surface area of ZIF-67, and the excellent conductive three-dimensional hierarchical porous network structure provided by LIG. In three-electrode system, ZIF-67/LIG composite electrode displays outstanding areal specific capacitance (C_A) of 135.6 mF cm^-2at a current density of 1 mA cm^-2with 1 M Na₂SO₄aqueous electrolyte, which is far greater than that of pristine LIG (7.7 mF cm^-2). Furthermore, the ZIF-67/LIG composite has been fabricated into an all-solid-state planar micro-supercapacitor (MSC). This ZIF-67/LIG MSC exhibits an impressiveC_Aof 38.1 mF cm^-2at a current density of 0.20 mA cm^-2, a good cycling stability of 80.3% capacitance retention after 3000 cycles, and a high energy density of 5.29μWh cm^-2at a power density of 0.1 mW cm^-2. All electrochemical results clearly manifest that as-prepared ZIF-67/LIG composite can be a candidate in energy storage field with exciting possibilities.

Road Map for In Situ Grown Binder-Free MOFs and Their Derivatives as Freestanding Electrodes for Supercapacitors

Among several electrocatalysts for energy storage purposes including supercapacitors, metal-organic frameworks (MOFs), and their derivatives have spurred wide spread interest owing to their structural merits, multifariousness with tailor-made functionalities and tunable pore sizes. The electrochemical performance of supercapacitors can be further enhanced using in situ grown MOFs and their derivatives, eliminating the role of insulating binders whose "dead mass" contribution hampers the device capability otherwise. The expulsion of binders not only ensures better adhesion of catalyst material with the current collector but also facilitates the transport of electron and electrolyte ions and remedy cycle performance deterioration with better chemical stability. This review systematically summarizes different kinds of metal-ligand combinations for in situ grown MOFs and derivatives, preparation techniques, modification strategies, properties, and charge transport mechanisms as freestanding electrode materials in determining the performance of supercapacitors. In the end, the review also highlights potential promises, challenges, and state-of-the-art advancement in the rational design of electrodes to overcome the bottlenecks and to improve the capability of MOFs in energy storage applications.

Pouch-Type Asymmetric Supercapacitor Based on Nickel-Cobalt Metal-Organic Framework

Bimetal-organic frameworks (BMOFs) have attracted considerable attention as electrode materials for energy storage devices because of the precise control of their porous structure, surface area, and pore volume. BMOFs can promote multiple redox reactions because of the enhanced charge transfer between different metal ions. Therefore, the electroactivity of the electrodes can be significantly improved. Herein, we report a NiCo-MOF (NCMF) with a three-dimensional hierarchical nanorod-like structure prepared using a facile solvo-hydrothermal method. The as-prepared NCMF was used as the positive electrode in a hybrid pouch-type asymmetric supercapacitor device (HPASD) with a gel electrolyte (KOH+PVA) and activated carbon as the negative electrode. Because of the matchable potential windows and specific capacitances of the two electrodes, the assembled HPASD exhibits a specific capacitance of 161 F·g^-1 at 0.5 A·g^-1, an energy density of 50.3 Wh·kg^-1 at a power density of 375 W·kg^-1, and a cycling stability of 87.6% after 6000 cycles. The reported unique synthesis strategy is promising for producing high-energy-density electrode materials for supercapacitors.

In-situ synthesized ZIF-67 graphene oxide (ZIF-67/GO) nanocomposite for efficient individual and simultaneous detection of heavy metal ions

Heavy metals are ubiquitous in water bodies as a result of anthropogenic activities and over time they accumulate in body thus posing serious health problems. Therefore, it is essential to improve sensing performance, for determination of heavy metal ions (HMIs), of electrochemical sensors. In this work, cobalt-derived MOF (ZIF-67) was in-situ synthesized and incorporated onto the surface of graphene oxide (GO) by simple sonication method. The prepared material (ZIF-67/GO) was characterized by FTIR, XRD, SEM, and Raman spectroscopy. Afterwards, a sensing platform was made by drop-casting synthesized composite onto glassy carbon electrode for individual and simultaneous detection of heavy metal ions pollutants (Hg²⁺, Zn²⁺, Pb²⁺, and Cr³⁺) with estimated detection limits of 2 nM, 1 nM, 5 nM, and 0.6 nM, respectively, when determined simultaneously, that are below the permissible limit by World Health Organization. To the best of our knowledge, this is first report of HMIs detection by ZIF-67 incorporated GO sensor which can successfully determine the Hg⁺², Zn⁺², Pb⁺², and Cr⁺³ ions simultaneously with lower detection limits.

Effective Formation of a Mn-ZIF-67 Nanofibrous Network via Electrospinning: An Active Electrocatalyst for OER in Alkaline Medium

Finding the active center in a bimetallic zeolite imidazolate framework (ZIF) is highly crucial for the electrocatalytic oxygen evolution reaction (OER). In the present study, we constructed a bimetallic ZIF system with cobalt and manganese metal ions and subjected it to an electrospinning technique for feasible fiber formation. The obtained nanofibers delivered a lower overpotential value of 302 mV at a benchmarking current density of 10 mA cm^-2 in an electrocatalytic OER study under alkaline conditions. The obtained Tafel slope and charge-transfer resistance values were 125 mV dec^-1 and 4 Ω, respectively. The kinetics of the reaction is mainly attributed from the ratio of metals (Co and Mn) present in the catalyst. Jahn-Teller distortion reveals that the electrocatalytic active center on the Mn-incorporated ZIF-67 nanofibers (Mn-ZIF-67-NFs) was found to be Mn³⁺ along with the Mn²⁺ and Co²⁺ ions on the octahedral and tetrahedral sites, respectively, where Co²⁺ ions tend to suppress the distortion, which is well supported by density functional theory analysis, molecular orbital study, and magnetic studies.

Computational and experimental elucidation of the boosted stability and antibacterial activity of ZIF-67 upon optimized encapsulation with polyoxometalates

Water microbial purification is one of the hottest topics that threats human morbidity and mortality. It is indispensable to purify water using antimicrobial agents combined with several technologies and systems. Herein, we introduce a class of nanosized metal organic framework; Zeolitic imidazolate framework (ZIF-67) cages encapsulated with polyoxometalates synthesized via facile one-step co-precipitation method. We employed two types of polyoxometalates bioactive agents; phosphotungstic acid (PTA) and phosphomolybdic acid (PMA) that act as novel antibacterial purification agents. Several characterization techniques were utilized to investigate the morphological, structural, chemical, and physical properties such as FESEM, EDS, FTIR, XRD, and N₂ adsorption/desorption isotherms techniques. The antibacterial assessment was evaluated using colony forming unit (CFU) against both Escherichia coli and Staphylococcus aureus as models of Gram-negative and Gram-positive bacteria, respectively. The PTA@ZIF-67 showed higher microbial inhibition against both Gram-positive and Gram-negative bacteria by 98.8% and 84.6%, respectively. Furthermore, computational modeling using density functional theory was conducted to evaluate the antibacterial efficacy of PTA when compared to PMA. The computational and experimental findings demonstrate that the fabricated POM@ZIF-67 materials exhibited outstanding bactericidal effect against both Gram-negative and Gram-positive bacteria and effectively purify contaminated water.

Non-enzymatic electrochemical sensing of dopamine from COVID-19 quarantine person

The worldwide outbreak of COVID-19 pandemic, is not only a great threat to the victim life but it is leaving invisible devastating negative affect on mental health of quarantined individual because of isolation, depression, bereavement, and loss of income. Therefore, the precise monitoring catecholamine neurotransmitters specifically of dopamine (DA) is of great importance to assess the mental health. Thus, herein we have synthesized Co-based zeolitic imidazolate framework (ZIF-67) through solvothermal method for precise monitoring of DA. To facilitate the fast transportation of ions, highly conductive polymer, poly(3,4-ethylenedioxythiophene; PEDOT) has been integrated on the surface of ZIF-67 which not only provides the smooth pathway for ions/electrons transportation but also saves the electrode from pulverization. The fabricated ZIF-67/PEDOT electrode shows a significant sensing performance towards DA detection in terms of short diffusion pathways by expositing more active sites, over good linear range (15-240 μM) and a low detection limit of (0.04 μM) even in the coexistence of the potentially interfering molecules. The developed ZIF-67/PEDOT sensor was successfully employed for sensitive and selective monitoring of DA from COVID-19 quarantined person blood, thus suggesting reliability of the developed electrode.

Pseudocapacitive features of freestanding nickel-zinc organometallic nanostructured arrays for high-energy density coin-cell asymmetric supercapacitors

Binder-free two-dimensional mesh-like structure of nickel-zinc metal-organic framework on in-situ-coated carbon cloth (Ni-Zn MOF/CC) and Ni-Zn MOF powder were developed via a solvo-hydrothermal reaction for electrochemical storage application. The electrochemical properties of these electrodes show that the electrodes self-assembled on carbon cloth substrates exhibit remarkably excellent performance. The Ni-Zn MOF/CC electrode exhibited a capacitance of 653.54 F/g at 1 A/g through a capacity retaining of 87.65 % after 10000 cycles. Furthermore, the Ni-Zn MOF//AC coin-cell asymmetric supercapacitor device (CASD) exhibited remarkable energy and power densities of 54.31 Wh/kg and 825 W/kg, respectively, with adequate capacitance retention up to 94.63% over 5000 cycles at 1.5 V. The CASD also exhibited a significant power density of 4950 W/kg at 19.67 W h/kg, which suggests that these in-situ developed MOF-based electrodes may discover application in energy storage devices.

Facile design and synthesis of a nickel disulfide/zeolitic imidazolate framework-67 composite material with a robust cladding structure for high-efficiency supercapacitors

In this paper, a core-shell structure nickel disulfide and ZIF-67 composite electrode material (NiS2/ZIF-67) was synthesized by a two-step method. Firstly, spherical NiS2 was synthesized by a hydrothermal method, dispersed in methanol, then reacted and coated by adding cobalt ions and 2-methylimidazole to obtain the NiS2/ZIF-67 core-shell composite. The NiS2/ZIF-67 composite shows a high specific capacitance (1297.9 F g-1 at 1 A g-1) and excellent cycling durability (retaining 110.0% after 4000 cycles at 5 A g-1). Furthermore, the corresponding hybrid supercapacitor (NiS2/ZIF-67//AC HSC) has an energy density of 9.5 W h kg-1 at 411.1 W kg-1 (6 M KOH) and remarkable cycling stability (maintaining 133.3% after 5000 cycles). Its excellent electrochemical performance may be due to the core-shell structure and the synergistic effect between the transition metal sulfide and metal-organic framework. These results indicate that the NiS2/ZIF-67 composite as an electrode material with a core-shell structure has potential application in high-efficiency supercapacitors.

High resolution solid state NMR in paramagnetic metal-organic frameworks

We study the metal-organic framework (MOF) ZIF-67 with ¹H and ¹³C nuclear magnetic resonance (NMR). In addition to the usual orbital chemical shifts, we observe spinning sideband manifolds in the NMR spectrum due to hyperfine interactions of the paramagnetic cobalt with ¹H and ¹³C. Both orbital and paramagnetic chemical shifts are in good agreement with values calculated from first principles, allowing high-confidence assignment of the observed peaks to specific sites within the MOF. Our measured resonance shifts, line shapes, and spin lattice relaxation rates are also consistent with calculated values. We show that molecules in the pores of the MOF can exhibit high-resolution NMR spectra with fast spin lattice relaxation rates due to dipole-dipole couplings to the Co²⁺ nodes in the ZIF-67 lattice, showcasing NMR spectroscopy as a powerful tool for identification and characterization of "guests" that may be hosted by the MOF in electrochemical and catalytic applications.

Simultaneous Electrodeposition of Ternary Metal Oxide Nanocomposites for High-Efficiency Supercapacitor Applications

Complex oxides and hydroxides of Ni, Co, and Mn from a precursor mixture were electrochemically deposited on both a cathode and an anode. On the Ni foam cathode, the complex metal hydroxides precipitated as nanolayers at -0.9 V. Simultaneously, the metal ions were oxidized and deposited as blocks on the Ni foam anode. While the concentrations of Ni(NO₃)₂ and Mn(NO₃)₂ were constant (80 mM for Ni²⁺ and 40 mM for Mn²⁺, respectively), the concentration of Co(NO₃)₂ was varied from 20 to 120 mM, which affected the morphology and electrochemical properties of the electrode: a Co:Ni:Mn molar ratio resulted in the highest specific capacitance (at a scan rate of 5 mV s^-1, 1800 F g^-1 for the cathode material and 720 F g^-1 for the anode material). This cathode material was assembled into symmetric supercapacitors, which demonstrated an excellent energy density of 39 Wh kg^-1 at a power density of 1300 W kg^-1 and a high capacitance retention of 90% after 3000 charge/discharge cycles. This high electrochemical performance was attributed to the optimized ratio of metal oxides, and this simple preparation strategy can be applied to other nanocomposites of complex metal oxides/hydroxides with desired characteristics for various applications.

Designing of two dimensional lanthanum cobalt hydroxide engineered high performance supercapacitor for longer stability under redox active electrolyte

Redox active electrolyte supercapacitors differ significantly from the conventional electrolytes based storage devices but face a long term stability issue which requires a different approach while designing the systems. Here, we show the change in layered double hydroxides (LDHs) systems with rare earth elements (lanthanum) can drastically influence the stability of two dimensional LDH systems in redox electrolyte. We find that the choice of rare earth element (lanthanum) having magnetic properties and higher thermal and chemical stability has a profound effect on the stability of La-Co LDHs electrode in redox electrolyte. The fabricated hybrid device with rare earth based positive electrode and carbon as negative electrode having redox electrolyte leads to long stable high volumetric/gravimetric capacity at high discharge rate, demonstrates the importance of considering the rare earth elements while designing the LDH systems for redox active supercapacitor development.

Comparison of a 2D/3D imidazole-based MOF and its application as a non-enzymatic electrochemical sensor for the detection of uric acid

Two dimensional microplate of W-ZIF-67 promotes a high catalytic activity for non-enzymatic electrochemical uric acid detection.

Cu/CuxO@C nanocomposites as efficient electrodes for high-performance supercapacitor devices

A novel method, reduction followed by oxidation procedure, has been developed to fabricate the efficient electrodes derivated from metal-organic frameworks (MOFs), which were synthesized using terephthalic acid (TP) or 1,3,5-benzenetricarboxylic...

A novel zinc sulfide impregnated carbon composite derived from zeolitic imidazolate framework-8 for sodium-ion hybrid solid-state flexible capacitors

The pyrolysis of metal-organic frameworks (MOFs) is an easy approach to prepare metal oxides as well as nanoporous carbon with high specific surface area. In the present work, for the first time, ZIF-8 (zeolitic imidazolate framework-8) has been pyrolyzed under different conditions to derive two products, i.e., highly porous carbon (C) and zinc sulfide (ZnS) infused carbon (ZnS@C). These two materials, i.e., nanoporous C and ZnS@C, have been investigated as a negative and a positive electrode, respectively, for potential application in a hybrid asymmetrical solid-state supercapacitor device (HASD). The controlled pyrolysis approach for the preparation of ZnS@C has yielded uniformly distributed ZnS nanoparticles inside the carbon structure. A 1.8 V HASD has been assembled, which delivered an excellent energy density of 38.3 W h kg^-1 (power density of 0.92 kW kg^-1) along with the greatly desirable feature of cycling stability. The proposed selection of materials as electrodes is promising to develop futuristic hybrid capacitors.

Influence of Temperature on ZnO/Co3O4 Nanocomposites for High Energy Storage Supercapacitors

We developed a two-step chemical bath deposition method followed by calcination for the production of ZnO/Co₃O₄ nanocomposites. In aqueous reactions, ZnO nanotubes were first densely grown on Ni foam, and then flat nanosheets of Co₃O₄ developed and formed a porous film. The aspect ratio and conductivity of the Co₃O₄ nanosheets were improved by the existence of the ZnO nanotubes, while the bath deposition from a mixture of Zn/Co precursors (one-step method) resulted in a wrinkled plate of Zn/Co oxides. As a supercapacitor electrode, the ZnO/Co₃O₄ nanosheets formed by the two-step method exhibited a high capacitance, and after being calcined at 450 °C, these nanosheets attained the highest specific capacitance (940 F g^-1) at a scan rate of 5 mV s^-1 in the cyclic voltammetry analysis. This value was significantly higher than those of single-component electrodes, Co₃O₄ (785 F g^-1) and ZnO (200 F g^-1); therefore, the presence of a synergistic effect was suggested. From the charge/discharge curves, the specific capacitance of ZnO/Co₃O₄ calcined at 450 °C was calculated to be 740 F g^-1 at a current density of 0.75 A g^-1, and 85.7% of the initial capacitance was retained after 1000 cycles. A symmetrical configuration exhibited a good cycling stability (Coulombic efficiency of 99.6% over 1000 cycles) and satisfied both the energy density (36.6 Wh kg^-1) and the power density (356 W kg^-1). Thus, the ZnO/Co₃O₄ nanocomposite prepared by this simple two-step chemical bath deposition and subsequent calcination at 450 °C is a promising material for pseudocapacitors. Furthermore, this approach can be applied to other metal oxide nanocomposites with intricate structures to extend the design possibility of active materials for electrochemical devices.

Metal-Organic Framework-Derived CoOx/Carbon Composite Array for High-Performance Supercapacitors

Metal-organic frameworks (MOFs) and their derivatives are promising materials for energy conversion and storage. This study demonstrates a solvent-free method to fabricate a CoO_x/carbon composite array derived from ZIF-67 for asymmetric supercapacitors. Tree-like Co metal arrays are electrodeposited on a surface and then directly converted into composite ZIF-67/Co-based MOF arrays via a chemical vapor deposition method (MOF-CVD). Finally, the CoO_x/carbon composite array is obtained by regulated calcination of the ZIF-67/Co composite array. The as-prepared CoO_x/carbon composite arrays provide a less tortuous pathway for ion diffusion, high pseudocapacitance from transition-metal oxides, and good electrical conductivity from carbon. Moreover, the absence of adhesives in array electrodes is also beneficial to the promotion of the electrochemical performance. The as-fabricated CoO_x/carbon composite array electrode shows excellent electrochemical performance with high energy density, high power density, superior rate capability, and long cycle life in an asymmetric supercapacitor. These MOF-derived composite arrays are promising candidate materials for power sources because of their good electrochemical performance.

Construction of a Tl(I) voltammetric sensor based on ZIF-67 nanocrystals: optimization of operational conditions via response surface design

An electroanalytical sensor was constructed constituted on a carbon paste electrode (CPE) with a ZIF-67 modifier and devoted to the quantification of Tl(I). Several characterization tests including XRD, BET, FT-IR, SEM/EDS/mapping, TEM, impedance spectroscopy (EIS), and cyclic voltammetry (CV) were performed on the synthesized ZIF-67 nanocrystals and CPE matrix. Central composite design (CCD) was used to assess the impact of variables affecting the sensor response, including the weight percent of ZIF-67 (14%), the pH of the thallium accumulation solution (6.4), and accumulation time (315 s) as well as the accumulation potential (-1.2 V). The direct linear relationship between the sensor response and the concentration of Tl(I) is in the interval of 1.0×10^-10 to 5.0×10^-7 M (coefficient of determination = 0.9994). The detection limit is approximately 1.0 × 10^-11 M. The right selection of the MOF makes this sensor highly resistant to the interference of other ions. High selectivity against common interferences in the measurement of thallium (such as Pb(II) and Cd(II)) is an important feature of this sensor. To confirm the performance of the prepared sensor, the amount of thallium in the real sample was determined.

A thioridazine hydrochloride electrochemical sensor based on zeolitic imidazolate framework-67-functionalized bio-mobile crystalline material-41 carbon quantum dots

In this research, we introduce an innovative nanocomposite based on ZIF-67/Bio-MCM-41/CQDs in order to fabricate a novel electrochemical sensor at the glassy carbon electrode and for the first time applied for the electrodetermination of the thioridazine hydrochloride.