1
|
Zhang H, Wang F, Guo Z. The antifouling mechanism and application of bio-inspired superwetting surfaces with effective antifouling performance. Adv Colloid Interface Sci 2024; 325:103097. [PMID: 38330881 DOI: 10.1016/j.cis.2024.103097] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/29/2023] [Revised: 01/14/2024] [Accepted: 01/28/2024] [Indexed: 02/10/2024]
Abstract
With the rapid development of industries, the issue of pollution on Earth has become increasingly severe. This has led to the deterioration of various surfaces, rendering them ineffective for their intended purposes. Examples of such surfaces include oil rigs, seawater intakes, and more. A variety of functional surface techniques have been created to address these issues, including superwetting surfaces, antifouling coatings, nano-polymer composite materials, etc. They primarily exploit the membrane's surface properties and hydration layer to improve the antifouling property. In recent years, biomimetic superwetting surfaces with non-toxic and environmental characteristics have garnered massive attention, greatly aiding in solving the problem of pollution. In this work, a detailed presentation of antifouling superwetting materials was made, including superhydrophobic surface, superhydrophilic surface, and superhydrophilic/underwater superoleophobic surface, along with the antifouling mechanisms. Then, the applications of the superwetting antifouling materials in antifouling domain were addressed in depth.
Collapse
Affiliation(s)
- Huayang Zhang
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei Key Laboratory of Polymer Materials, Hubei University, Wuhan 430062, China
| | - Fengyi Wang
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei Key Laboratory of Polymer Materials, Hubei University, Wuhan 430062, China; School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China.
| | - Zhiguang Guo
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei Key Laboratory of Polymer Materials, Hubei University, Wuhan 430062, China; State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China
| |
Collapse
|
2
|
Akintola J, Chen Y, Digby ZA, Schlenoff JB. Antifouling Coatings from Glassy Polyelectrolyte Complex Films. ACS APPLIED MATERIALS & INTERFACES 2023; 15:50058-50068. [PMID: 37871187 DOI: 10.1021/acsami.3c11744] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/25/2023]
Abstract
Coatings that prevent or decrease fouling are sought for many applications, including those that inhibit the attachment of organisms in aquatic environments. To date, antifouling coatings have mostly followed design criteria assembled over decades: surfaces should be well/strongly hydrated, possess low net charge, and maintain a hydrophilic character when exposed to the location of use. Thus, polymers based on ethylene glycol or zwitterionic repeat units have been shown to be highly effective. Unfortunately, hydrated materials can be quite soft, limiting their use in some environments. In a major paradigm shift, this work describes glassy antifouling films made from certain complexes of positive and negative polyelectrolytes. The dense network of electrostatic interactions yields tough materials below the glass transition temperature, Tg, in normal use, while the highly ionic character of these polyelectrolyte complexes ensures strong hydration. The proximity of equal numbers of opposite charges within these complexes mimics zwitterionic structures. Films, assembled layer-by-layer from aqueous solutions, contained sulfonated poly(ether ether ketone), SPEEK, a rigid polyelectrolyte that binds strongly to a selection of quaternary ammonium polycations. Layer-by-layer buildup of SPEEK and polycations was linear, indicating strong complexes between polyelectrolytes. Calorimetry also showed that complex formation was exothermic. Surfaces coated with these films in the 100 nm thickness range completely resisted adhesion of the common flagellate green algae, Chlamydomonas reinhardtii, which were removed from surfaces at a minimum applied flow rate of 0.8 cm s-1. The total surface charge density of adsorbed cations, determined with a sensitive radioisotopic label, was very low, around 10% of a monolayer, which minimized adsorption driven by counterion release from the surface. The viscoelastic properties of the complexes, which were stable even in concentrated salt solutions, were explored using rheology of bulk samples. When fully hydrated, their Tg values were observed to be above 75 °C.
Collapse
Affiliation(s)
- John Akintola
- Department of Chemistry and Biochemistry , The Florida State University , Tallahassee, Florida 32308-4390 , United States
| | - Yuhui Chen
- Department of Chemistry and Biochemistry , The Florida State University , Tallahassee, Florida 32308-4390 , United States
| | - Zachary A Digby
- Department of Chemistry and Biochemistry , The Florida State University , Tallahassee, Florida 32308-4390 , United States
| | - Joseph B Schlenoff
- Department of Chemistry and Biochemistry , The Florida State University , Tallahassee, Florida 32308-4390 , United States
| |
Collapse
|
3
|
Ebel FA, Liaudat AC, Blois DA, Capella V, Broglia MF, Barbero CA, Rodríguez N, Bosch P, Rivarola CR. Biointerfacial behavior of stallion spermatozoa adhered to hydrogel surfaces: Impact of the hydrogel chemical composition and the culture medium. Colloids Surf B Biointerfaces 2023; 231:113575. [PMID: 37832175 DOI: 10.1016/j.colsurfb.2023.113575] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/19/2023] [Revised: 09/20/2023] [Accepted: 09/30/2023] [Indexed: 10/15/2023]
Abstract
Novel soft materials based on hydrogel are proposed to enhance the selection of high-quality stallion sperm based on their adhesion capacity. The hydrogel surfaces are derived from polyacrylamide (PAAm), which is copolymerized with neutral and ionic co-monomers to modify the interfacial properties. The hydrogels undergo characterization through FTIR spectroscopy, assessment of swelling capacity, and wettability under various experimental conditions. Sperm adhesion capacity on the hydrogels is examined through several parameters including the percentage of bound sperm (%Sp) to hydrogels, tail oscillation intensity and flagellar movement. The biointerfacial properties of sperm-hydrogel systems vary based on the chemical composition of hydrogel as well as the components present in the culture medium. High %Sp and excellent metabolic activity of the spermatozoa are observed on hydrogel surfaces that possess moderate hydrophilicity. Specifically, a cationic hydrogel in BGM3 culture medium and a neutral surface in BGM3 medium supplemented with BSA exhibit favorable outcomes. Scanning Electron Microscopy (SEM) reveals the normal morphology of the head and tail in spermatozoa adhered to the hydrogel. Therefore, these hydrogel surfaces are potential materials for selecting stallion sperm with high quality, and their application could be extended to the study of other mammalian reproductive cells.
Collapse
Affiliation(s)
- Francisca A Ebel
- Institute of Environmental Biotechnology and Health, Faculty of Exact, Physicochemical and Natural Sciences, National University of Río Cuarto, National Route 36, KM. 601, 5800, Argentina
| | - Ana C Liaudat
- Institute of Environmental Biotechnology and Health, Faculty of Exact, Physicochemical and Natural Sciences, National University of Río Cuarto, National Route 36, KM. 601, 5800, Argentina
| | - Damián A Blois
- Institute of Environmental Biotechnology and Health, Faculty of Exact, Physicochemical and Natural Sciences, National University of Río Cuarto, National Route 36, KM. 601, 5800, Argentina
| | - Virginia Capella
- Institute of Environmental Biotechnology and Health, Faculty of Exact, Physicochemical and Natural Sciences, National University of Río Cuarto, National Route 36, KM. 601, 5800, Argentina
| | - Martin F Broglia
- Research Institute in Energy Technologies and Advanced Materials, Faculty of Exact, Physicochemical and Natural Sciences, National University of Río Cuarto, National Route 36, KM. 601, 5800, Argentina
| | - Cesar A Barbero
- Research Institute in Energy Technologies and Advanced Materials, Faculty of Exact, Physicochemical and Natural Sciences, National University of Río Cuarto, National Route 36, KM. 601, 5800, Argentina
| | - Nancy Rodríguez
- Institute of Environmental Biotechnology and Health, Faculty of Exact, Physicochemical and Natural Sciences, National University of Río Cuarto, National Route 36, KM. 601, 5800, Argentina
| | - Pablo Bosch
- Institute of Environmental Biotechnology and Health, Faculty of Exact, Physicochemical and Natural Sciences, National University of Río Cuarto, National Route 36, KM. 601, 5800, Argentina
| | - Claudia R Rivarola
- Research Institute in Energy Technologies and Advanced Materials, Faculty of Exact, Physicochemical and Natural Sciences, National University of Río Cuarto, National Route 36, KM. 601, 5800, Argentina.
| |
Collapse
|
4
|
Wasilewska M, Michna A, Pomorska A, Wolski K, Zapotoczny S, Farkas E, Szittner Z, Szekacs I, Horvath R. Polysaccharide-based nano-engineered multilayers for controlled cellular adhesion in label-free biosensors. Int J Biol Macromol 2023; 247:125701. [PMID: 37429346 DOI: 10.1016/j.ijbiomac.2023.125701] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/21/2023] [Revised: 06/22/2023] [Accepted: 07/03/2023] [Indexed: 07/12/2023]
Abstract
Controlling cellular adhesion is a critical step in the development of biomaterials, and in cell- based biosensing assays. Usually, the adhesivity of cells is tuned by an appropriate biocompatible layer. Here, synthetic poly(diallyldimethylammonium chloride) (PDADMAC), natural chitosan, and heparin (existing in an extracellular matrix) were selected to assembly PDADMAC/heparin and chitosan/heparin films. The physicochemical properties of macroion multilayers were determined by streaming potential measurements (SPM), quartz crystal microbalance (QCM-D), and optical waveguide lightmode spectroscopy (OWLS). The topography of the wet films was imaged using atomic force microscopy (AFM). The adhesion of preosteoblastic cell line MC3T3-E1 on those well-characterized polysaccharide-based multilayers was evaluated using a resonant waveguide grating (RWG) based optical biosensor and digital holographic microscopy. The latter method was engaged to investigate long-term cellular behavior on the fabricated multilayers. (PDADMAC/heparin) films were proved to be the most effective in inducing cellular adhesion. The cell attachment to chitosan/heparin-based multilayers was negligible. It was found that efficient adhesion of the cells occurs onto homogeneous and rigid multilayers (PDADMAC/heparin), whereas the macroion films forming "sponge-like" structures (chitosan/heparin) are less effective, and could be employed when reduced adhesion is needed. Polysaccharide-based multilayers can be considered versatile systems for medical applications. One can postulate that the presented results are relevant not only for modeling studies but also for applied research.
Collapse
Affiliation(s)
- Monika Wasilewska
- Jerzy Haber Institute of Catalysis and Surface Chemistry, Polish Academy of Sciences, Niezapominajek 8, PL-30239 Krakow, Poland.
| | - Aneta Michna
- Jerzy Haber Institute of Catalysis and Surface Chemistry, Polish Academy of Sciences, Niezapominajek 8, PL-30239 Krakow, Poland.
| | - Agata Pomorska
- Jerzy Haber Institute of Catalysis and Surface Chemistry, Polish Academy of Sciences, Niezapominajek 8, PL-30239 Krakow, Poland.
| | - Karol Wolski
- Faculty of Chemistry, Jagiellonian University, Gronostajowa 2, 30-387 Krakow, Poland.
| | - Szczepan Zapotoczny
- Faculty of Chemistry, Jagiellonian University, Gronostajowa 2, 30-387 Krakow, Poland.
| | - Enikő Farkas
- Nanobiosensorics Laboratory, Institute of Technical Physics and Materials Science, Centre for Energy Research, 1121 Budapest, Hungary.
| | - Zoltan Szittner
- Nanobiosensorics Laboratory, Institute of Technical Physics and Materials Science, Centre for Energy Research, 1121 Budapest, Hungary.
| | - Inna Szekacs
- Nanobiosensorics Laboratory, Institute of Technical Physics and Materials Science, Centre for Energy Research, 1121 Budapest, Hungary.
| | - Robert Horvath
- Nanobiosensorics Laboratory, Institute of Technical Physics and Materials Science, Centre for Energy Research, 1121 Budapest, Hungary.
| |
Collapse
|
5
|
Bioactive Synthetic Polymer-Based Polyelectrolyte LbL Coating Assembly on Surface Treated AZ31-Mg Alloys. J Funct Biomater 2023; 14:jfb14020075. [PMID: 36826874 PMCID: PMC9964909 DOI: 10.3390/jfb14020075] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/21/2022] [Revised: 01/19/2023] [Accepted: 01/25/2023] [Indexed: 02/03/2023] Open
Abstract
Polyelectrolyte layer-by-layer (LbL) films on pretreated Mg containing 3 wt.% Al and 1 wt.% Zn (MgAZ31) alloy surfaces were prepared under physiological conditions offering improved bioresponse and corrosive protection. Pretreatments of the model MgAZ31 substrate surfaces were performed by alkaline and fluoride coating methods. The anti-corrosion and cytocompatibility behavior of pretreated substrates were evaluated. The LbL film assembly consisted of an initial layer of polyethyleneimine (PEI), followed by alternate layers of poly (lactic-co-glycolic acid) (PLGA) and poly (allylamine hydrochloride) (PAH), which self-arrange via electrostatic interactions on the pretreated MgAZ31 alloy substrate surface. The physicochemical characterization, surface morphologies, and microstructures of the LbL films were investigated using Fourier-transformed infrared spectroscopy (FTIR), atomic force microscopy (AFM), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The in vitro stability studies related to the LbL coatings confirmed that the surface treatments are imperative to achieve the lasting stability of PLGA/PAH layers. Electrochemical impedance spectroscopy measurements demonstrated that pretreated and LbL multilayered coated substrates enhanced the corrosion resistance of the bare MgAZ31 alloy. Cytocompatibility studies using human mesenchymal stem cells seeded directly over the substrates showed that the pretreated and LbL-generated surfaces were more cytocompatible, displaying reduced cytotoxicity than the bare MgAZ31. The release of bovine serum albumin protein from the LbL films was also studied. The initial data presented cooperatively demonstrate the promise of creating LbL layers on Mg-related bioresorbable scaffolds to obtain improved surface bio-related activity.
Collapse
|
6
|
Chau Nguyen TT, Shin CM, Lee SJ, Koh ES, Kwon HH, Park H, Kim DH, Choi CH, Oh SH, Kim DW, Yang SY. Ultrathin Nanostructured Films of Hyaluronic Acid and Functionalized β-Cyclodextrin Polymer Suppress Bacterial Infection and Capsular Formation of Medical Silicone Implants. Biomacromolecules 2022; 23:4547-4561. [PMID: 36130109 PMCID: PMC9667880 DOI: 10.1021/acs.biomac.2c00687] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/31/2022] [Revised: 09/08/2022] [Indexed: 11/29/2022]
Abstract
A type of ultrathin films has been developed for suppressing capsule formation induced by medical silicone implants and hence reducing the inflammation response to such formation and the differentiation to myofibroblasts. The films were each fabricated from hyaluronic acid (HA) and modified β-cyclodextrin (Mod-β-CyD) polymer which was synthesized with a cyclodextrin with partially substituted quaternary amine. Ultrathin films comprising HA and Mod-β-CyD or poly(allylamine hydrochloride) (PAH) were fabricated by using a layer-by-layer dipping method. The electrostatic interactions produced from the functional groups of Mod-β-CyD and HA influenced the surface morphology, wettability, and bio-functional activity of the film. Notably, medical silicone implants coated with PAH/HA and Mod-β-CyD multilayers under a low pH condition exhibited excellent biocompatibility and antibiofilm and anti-inflammation properties. Implantation of these nanoscale film-coated silicones showed a reduced capsular thickness as well as reduced TGFβ-SMAD signaling, myofibroblast differentiation, biofilm formation, and inflammatory response levels. We expect our novel coating system to be considered a strong candidate for use in various medical implant applications in order to decrease implant-induced capsule formation.
Collapse
Affiliation(s)
- Thi Thuy Chau Nguyen
- Department
of Polymer Science and Engineering, Graduate
School of Chungnam National University, 99 Daehak-Ro, Yuseong-gu, Daejeon 34134, Republic
of Korea
| | - Chung Min Shin
- Department
of Plastic Surgery, Chungnam National University
School of Medicine, 266 Munhwa-Ro, Chung-Gu, Daejeon 35015, Republic of Korea
| | - Su Jin Lee
- Department
of Polymer Science and Engineering, Graduate
School of Chungnam National University, 99 Daehak-Ro, Yuseong-gu, Daejeon 34134, Republic
of Korea
| | - Eun Seo Koh
- Department
of Polymer Science and Engineering, Graduate
School of Chungnam National University, 99 Daehak-Ro, Yuseong-gu, Daejeon 34134, Republic
of Korea
| | - Hyeok Hee Kwon
- Department
of Medical Science, Chungnam National University
School of Medicine, 266
Munhwa-Ro, Chung-Gu, Daejeon 35015, Republic of Korea
| | - Hyewon Park
- Department
of Medical Science, Chungnam National University
School of Medicine, 266
Munhwa-Ro, Chung-Gu, Daejeon 35015, Republic of Korea
| | - Dong Ho Kim
- Department
of Microbiology, Chungnam National University
School of Medicine, 266
Munhwa-Ro, Chung-Gu, Daejeon 35015, Republic of Korea
- Department
of Medical Science, Chungnam National University
School of Medicine, 266
Munhwa-Ro, Chung-Gu, Daejeon 35015, Republic of Korea
| | - Chul Hee Choi
- Department
of Microbiology, Chungnam National University
School of Medicine, 266
Munhwa-Ro, Chung-Gu, Daejeon 35015, Republic of Korea
- Department
of Medical Science, Chungnam National University
School of Medicine, 266
Munhwa-Ro, Chung-Gu, Daejeon 35015, Republic of Korea
| | - Sang-Ha Oh
- Department
of Plastic Surgery, Chungnam National University
School of Medicine, 266 Munhwa-Ro, Chung-Gu, Daejeon 35015, Republic of Korea
| | - Dong Woon Kim
- Department
of Anatomy and Cell Biology, Chungnam National
University School of Medicine, 266 Munhwa-Ro, Chung-Gu, Daejeon 35015, Republic of Korea
| | - Sung Yun Yang
- Department
of Polymer Science and Engineering, Graduate
School of Chungnam National University, 99 Daehak-Ro, Yuseong-gu, Daejeon 34134, Republic
of Korea
| |
Collapse
|
7
|
Roupie C, Labat B, Morin-Grognet S, Thébault P, Ladam G. Nisin-based antibacterial and antiadhesive layer-by-layer coatings. Colloids Surf B Biointerfaces 2021; 208:112121. [PMID: 34600362 DOI: 10.1016/j.colsurfb.2021.112121] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/06/2021] [Revised: 09/09/2021] [Accepted: 09/15/2021] [Indexed: 10/20/2022]
Abstract
Some removable medical devices such as catheters and cardiovascular biomaterials require antiadhesive properties towards both prokaryotic and eukaryotic cells in order to prevent the tissues from infections upon implantation and, from alteration upon removal. In order to inhibit cell adhesion, we developed ultrathin hydrated Layer-by-Layer (LbL) coatings composed of biocompatible polyelectrolytes, namely chondroitin sulfate A (CSA) and poly-l-lysine (PLL). The coatings were crosslinked with genipin (GnP), a natural and biocompatible crosslinking agent, to increase their resistance against environmental changes. In order to confer antibacterial activity to the coatings, we proceeded to the electrostatically-driven immobilization of nisin Z, an antimicrobial peptide (AMP) active against gram-positive bacteria. The nisin-enriched coatings had a significantly increased anti-proliferative impact on fibroblasts, as well as a strong contact-killing activity against Staphylococcus aureus in the short and long term.
Collapse
Affiliation(s)
- Charlotte Roupie
- Normandie Univ, UNIROUEN, INSA Rouen, CNRS, PBS, Bd Maurice de Broglie, 76821 Mont Saint Aignan Cedex, France; Normandie Univ, UNIROUEN, INSA Rouen, CNRS, PBS, 55 rue Saint-Germain, 27000 Évreux, France
| | - Béatrice Labat
- Normandie Univ, UNIROUEN, INSA Rouen, CNRS, PBS, 55 rue Saint-Germain, 27000 Évreux, France
| | - Sandrine Morin-Grognet
- Normandie Univ, UNIROUEN, INSA Rouen, CNRS, PBS, 55 rue Saint-Germain, 27000 Évreux, France
| | - Pascal Thébault
- Normandie Univ, UNIROUEN, INSA Rouen, CNRS, PBS, Bd Maurice de Broglie, 76821 Mont Saint Aignan Cedex, France
| | - Guy Ladam
- Normandie Univ, UNIROUEN, INSA Rouen, CNRS, PBS, 55 rue Saint-Germain, 27000 Évreux, France.
| |
Collapse
|
8
|
Aghajani M, Esmaeili F. Anti-biofouling assembly strategies for protein & cell repellent surfaces: a mini-review. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION 2021; 32:1770-1789. [PMID: 34085909 DOI: 10.1080/09205063.2021.1932357] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/21/2022]
Abstract
The protein/cell interactions with the surface at the blood-biomaterial interface generally control the efficiency of biomedical devices. A wide range of active processes and slow kinetics occur simultaneously with many biomaterials in healthcare applications, leading to multiple biological reactions and reduced clinical functions. In this work, we present a brief review of studies as the interface between proteins and biomaterials. These include mechanisms of resistance to proteins, protein-rejecting polyelectrolyte multilayers, and coatings of hydrophilic, polysaccharide and phospholipid nature. The mechanisms required to attain surfaces that resist adhesion include steric exclusion, water-related effects, and volume effects. Also, approaches in the use of hydrophilic, highly hydrated, and electrically neutral coatings have demonstrated a good ability to decrease cell adhesion. Moreover, amongst the available methods, the approach of layer-by-layer deposition has been known as an interesting process to manipulate protein and cell adhesion behavior.
Collapse
Affiliation(s)
- Mahdi Aghajani
- Department of Medical Nanotechnology, School of Advanced Technologies in Medicine, Tehran University of Medical Sciences, Tehran, Iran.,School of Advanced Technologies in Medicine, Golestan University of Medical Sciences, Gorgan, Iran
| | - Fariba Esmaeili
- Department of Medical Nanotechnology, School of Advanced Technologies in Medicine, Tehran University of Medical Sciences, Tehran, Iran
| |
Collapse
|
9
|
Bhandary L, Bailey PC, Chang KT, Underwood KF, Lee CJ, Whipple RA, Jewell CM, Ory E, Thompson KN, Ju JA, Mathias TM, Pratt SJP, Vitolo MI, Martin SS. Lipid tethering of breast tumor cells reduces cell aggregation during mammosphere formation. Sci Rep 2021; 11:3214. [PMID: 33547369 PMCID: PMC7865010 DOI: 10.1038/s41598-021-81919-9] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/29/2020] [Accepted: 12/24/2020] [Indexed: 12/11/2022] Open
Abstract
Mammosphere assays are widely used in vitro to identify prospective cancer-initiating stem cells that can propagate clonally to form spheres in free-floating conditions. However, the traditional mammosphere assay inevitably introduces cell aggregation that interferes with the measurement of true mammosphere forming efficiency. We developed a method to reduce tumor cell aggregation and increase the probability that the observed mammospheres formed are clonal in origin. Tethering individual tumor cells to lipid anchors prevents cell drift while maintaining free-floating characteristics. This enables real-time monitoring of single tumor cells as they divide to form mammospheres. Monitoring tethered breast cancer cells provided detailed size information that correlates directly to previously published single cell tracking data. We observed that 71% of the Day 7 spheres in lipid-coated wells were between 50 and 150 μm compared to only 37% in traditional low attachment plates. When an equal mixture of MCF7-GFP and MCF7-mCherry cells were seeded, 65% of the mammospheres in lipid-coated wells demonstrated single color expression whereas only 32% were single-colored in low attachment wells. These results indicate that using lipid tethering for mammosphere growth assays can reduce the confounding factor of cell aggregation and increase the formation of clonal mammospheres.
Collapse
Affiliation(s)
- Lekhana Bhandary
- Marlene and Stewart Greenebaum Comprehensive Cancer Center, University of Maryland School of Medicine (UMGCCC), 22 S. Greene St., Baltimore, MD, 21201, USA
| | - Patrick C Bailey
- Marlene and Stewart Greenebaum Comprehensive Cancer Center, University of Maryland School of Medicine (UMGCCC), 22 S. Greene St., Baltimore, MD, 21201, USA.,Graduate Program in Biochemistry, University of Maryland School of Medicine, 800 W. Baltimore St., Baltimore, MD, 21201, USA
| | - Katarina T Chang
- Marlene and Stewart Greenebaum Comprehensive Cancer Center, University of Maryland School of Medicine (UMGCCC), 22 S. Greene St., Baltimore, MD, 21201, USA.,Graduate Program in Life Sciences, University of Maryland School of Medicine, 800 W. Baltimore St., Baltimore, MD, 21201, USA
| | - Karen F Underwood
- UMGCCC Flow Cytometry Shared Service, 655 West Baltimore Street, BRB 7-022, Baltimore, MD, 21201, USA
| | - Cornell J Lee
- Marlene and Stewart Greenebaum Comprehensive Cancer Center, University of Maryland School of Medicine (UMGCCC), 22 S. Greene St., Baltimore, MD, 21201, USA
| | - Rebecca A Whipple
- Marlene and Stewart Greenebaum Comprehensive Cancer Center, University of Maryland School of Medicine (UMGCCC), 22 S. Greene St., Baltimore, MD, 21201, USA
| | - Christopher M Jewell
- Fischell Department of Bioengineering, 3102 A. James Clark Hall, College Park, MD, 20742, USA
| | - Eleanor Ory
- Marlene and Stewart Greenebaum Comprehensive Cancer Center, University of Maryland School of Medicine (UMGCCC), 22 S. Greene St., Baltimore, MD, 21201, USA
| | - Keyata N Thompson
- Marlene and Stewart Greenebaum Comprehensive Cancer Center, University of Maryland School of Medicine (UMGCCC), 22 S. Greene St., Baltimore, MD, 21201, USA
| | - Julia A Ju
- Marlene and Stewart Greenebaum Comprehensive Cancer Center, University of Maryland School of Medicine (UMGCCC), 22 S. Greene St., Baltimore, MD, 21201, USA
| | - Trevor M Mathias
- Marlene and Stewart Greenebaum Comprehensive Cancer Center, University of Maryland School of Medicine (UMGCCC), 22 S. Greene St., Baltimore, MD, 21201, USA
| | - Stephen J P Pratt
- Marlene and Stewart Greenebaum Comprehensive Cancer Center, University of Maryland School of Medicine (UMGCCC), 22 S. Greene St., Baltimore, MD, 21201, USA.,Graduate Program in Biochemistry, University of Maryland School of Medicine, 800 W. Baltimore St., Baltimore, MD, 21201, USA
| | - Michele I Vitolo
- Marlene and Stewart Greenebaum Comprehensive Cancer Center, University of Maryland School of Medicine (UMGCCC), 22 S. Greene St., Baltimore, MD, 21201, USA. .,Graduate Program in Biochemistry, University of Maryland School of Medicine, 800 W. Baltimore St., Baltimore, MD, 21201, USA. .,Department of Physiology, University of Maryland School of Medicine, 655 W. Baltimore St., Baltimore, MD, 21201, USA.
| | - Stuart S Martin
- Marlene and Stewart Greenebaum Comprehensive Cancer Center, University of Maryland School of Medicine (UMGCCC), 22 S. Greene St., Baltimore, MD, 21201, USA. .,Graduate Program in Biochemistry, University of Maryland School of Medicine, 800 W. Baltimore St., Baltimore, MD, 21201, USA. .,Department of Physiology, University of Maryland School of Medicine, 655 W. Baltimore St., Baltimore, MD, 21201, USA. .,, Bressler Research Building Room 10-29, 655 West Baltimore Street, Baltimore, MD, 21201, USA.
| |
Collapse
|
10
|
Li Y, Tang Z, Wang W, Huang X, Lv Y, Qian F, Cheng Y, Wang H. Improving air barrier, water vapor permeability properties of cellulose paper by layer-by-layer assembly of graphene oxide. Carbohydr Polym 2021; 253:117227. [PMID: 33278987 DOI: 10.1016/j.carbpol.2020.117227] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/13/2020] [Revised: 10/05/2020] [Accepted: 10/08/2020] [Indexed: 12/01/2022]
Abstract
A paper-based packaging material with improved air barrier and water vapor permeability (WVP) properties was synthesized based on layer-by-layer assembly consisted of poly(ethylenimine) (PEI)/graphene oxide (GO) on a filter paper substrate. The effect of the pH of GO suspension on the zeta potential and air permeability (AP) of the modified paper was investigated in detail. The results indicated that the pH of GO suspension resulted in significant difference in the AP of the modified paper. Compare with the pristine paper, the AP of the modified paper with (PEI/GO)10 multilayer films synthesized at pH 2.5 decreased by 99.99 %, while the WVP increased by 15.82 %. The modified paper as packaging material could prolong the shelf-life of oyster mushroom, indicating the modified paper has huge potential application on the preservation of agricultural products.
Collapse
Affiliation(s)
- Yufeng Li
- School of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, Liaoning, China; College of Agriculture and Forestry, Hebei North University, Zhangjiakou 075000, Hebei, China
| | - Zongjun Tang
- School of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, Liaoning, China
| | - Wenlin Wang
- School of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, Liaoning, China
| | - Xiong Huang
- School of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, Liaoning, China
| | - Yanna Lv
- School of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, Liaoning, China
| | - Fang Qian
- School of Food Science and Technology, Dalian Polytechnic University, Dalian 116034, Liaoning, China
| | - Yi Cheng
- School of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, Liaoning, China.
| | - Haisong Wang
- School of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, Liaoning, China.
| |
Collapse
|
11
|
Escobar A, Muzzio N, Moya SE. Antibacterial Layer-by-Layer Coatings for Medical Implants. Pharmaceutics 2020; 13:E16. [PMID: 33374184 PMCID: PMC7824561 DOI: 10.3390/pharmaceutics13010016] [Citation(s) in RCA: 39] [Impact Index Per Article: 9.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/20/2020] [Revised: 12/17/2020] [Accepted: 12/21/2020] [Indexed: 11/18/2022] Open
Abstract
The widespread occurrence of nosocomial infections and the emergence of new bacterial strands calls for the development of antibacterial coatings with localized antibacterial action that are capable of facing the challenges posed by increasing bacterial resistance to antibiotics. The Layer-by-Layer (LbL) technique, based on the alternating assembly of oppositely charged polyelectrolytes, can be applied for the non-covalent modification of multiple substrates, including medical implants. Polyelectrolyte multilayers fabricated by the LbL technique have been extensively researched for the development of antibacterial coatings as they can be loaded with antibiotics, antibacterial peptides, nanoparticles with bactericide action, in addition to being capable of restricting adhesion of bacteria to surfaces. In this review, the different approaches that apply LbL for antibacterial coatings, emphasizing those that can be applied for implant modification are presented.
Collapse
Affiliation(s)
- Ane Escobar
- Center for Cooperative Research in Biomaterials (CIC biomaGUNE), Basque Research and Technology Alliance (BRTA), Paseo de Miramon 182 C, 20014 Donostia-San Sebastian, Spain;
| | - Nicolas Muzzio
- Department of Biomedical Engineering and Chemical Engineering, University of Texas at San Antonio, San Antonio, TX 78249, USA;
| | - Sergio Enrique Moya
- Center for Cooperative Research in Biomaterials (CIC biomaGUNE), Basque Research and Technology Alliance (BRTA), Paseo de Miramon 182 C, 20014 Donostia-San Sebastian, Spain;
| |
Collapse
|
12
|
Ávila-Cossío ME, Rivero IA, García-González V, Alatorre-Meda M, Rodríguez-Velázquez E, Calva-Yáñez JC, Espinoza KA, Pulido-Capiz Á. Preparation of Polymeric Films of PVDMA-PEI Functionalized with Fatty Acids for Studying the Adherence and Proliferation of Langerhans β-Cells. ACS OMEGA 2020; 5:5249-5257. [PMID: 32201814 PMCID: PMC7081399 DOI: 10.1021/acsomega.9b04313] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/16/2019] [Accepted: 02/18/2020] [Indexed: 06/10/2023]
Abstract
This study reports the synthesis of thin polymeric films by the layer-by-layer deposition and covalent cross-linking of polyvinyl dimethylazlactone and polyethylene imine, which were functionalized with lauric (12-C), myristic (14-C), and palmitic (16-C) saturated fatty acids, whose high levels in the bloodstream are correlated with insulin resistance and the potential development of type 2 diabetes mellitus. Aiming to assess the effect of the fatty acids on the adhesion and proliferation of Langerhans β-cells, all prepared films (35 and 35.5 bilayers with and without functionalization with the fatty acids) were characterized in terms of their physical, chemical, and biological properties by a battery of experimental techniques including 1H and 13C NMR, mass spectrometry, attenuated total reflectance-Fourier transform infrared spectroscopy, field emission scanning electron microscopy, atomic force microscopy, cell staining, and confocal laser scanning microscopy among others. In general, the developed films were found to be nanometric, transparent, resistant against manipulation, chemically reactive, and highly cytocompatible. On the other hand, in what the effect of the fatty acids is concerned, palmitic acid was found to impair the proliferation of the cultured β-cells, contrary to its homologues which did not alter this biological process. In our opinion, the multidisciplinary study presented here might be of interest for the research community working on the development of cytocompatible 2D model substrates for the safe and reproducible characterization of cell responses.
Collapse
Affiliation(s)
- Martha E Ávila-Cossío
- Tecnológico Nacional de México/Instituto Tecnológico de Tijuana, Centro de Graduados e Investigación en Química, Blvd. Alberto Limón Padilla S/N, 22510 Tijuana, Baja California, Mexico
| | - Ignacio A Rivero
- Tecnológico Nacional de México/Instituto Tecnológico de Tijuana, Centro de Graduados e Investigación en Química, Blvd. Alberto Limón Padilla S/N, 22510 Tijuana, Baja California, Mexico
| | - Victor García-González
- Departamento de Bioquímica, Facultad de Medicina Mexicali, Universidad Autónoma de Baja California, 21100 Mexicali, Baja California, Mexico
| | - Manuel Alatorre-Meda
- Cátedras CONACyT-Tecnológico Nacional de México/Instituto Tecnológico de Tijuana, Centro de Graduados e Investigación en Química-Grupo de Biomateriales y Nanomedicina, Blvd. Alberto Limón Padilla S/N, 22510 Tijuana, Baja California, Mexico
| | - Eustolia Rodríguez-Velázquez
- Facultad de Odontología, Universidad Autónoma de Baja California, Campus Tijuana, Calzada Universidad 14418, 22390 Tijuana, Baja California, Mexico
- Tecnológico Nacional de México/Instituto Tecnológico de Tijuana, Centro de Graduados e Investigación en Química-Grupo de Biomateriales y Nanomedicina, Blvd. Alberto Limón Padilla S/N, 22510 Tijuana, Baja California, Mexico
| | - Julio C Calva-Yáñez
- Cátedras CONACyT-Tecnológico Nacional de México/Instituto Tecnológico de Tijuana, Centro de Graduados e Investigación en Química-Grupo de Biomateriales y Nanomedicina, Blvd. Alberto Limón Padilla S/N, 22510 Tijuana, Baja California, Mexico
| | - Karla A Espinoza
- Tecnológico Nacional de México/Instituto Tecnológico de Tijuana, Centro de Graduados e Investigación en Química, Blvd. Alberto Limón Padilla S/N, 22510 Tijuana, Baja California, Mexico
| | - Ángel Pulido-Capiz
- Departamento de Bioquímica, Facultad de Medicina Mexicali, Universidad Autónoma de Baja California, 21100 Mexicali, Baja California, Mexico
| |
Collapse
|
13
|
Soft nanotechnology: the potential of polyelectrolyte multilayers against E. coli adhesion to surfaces. Arh Hig Rada Toksikol 2020; 71:63-68. [PMID: 32597138 PMCID: PMC7837241 DOI: 10.2478/aiht-2020-71-3319] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/01/2019] [Accepted: 03/01/2020] [Indexed: 11/20/2022] Open
Abstract
Preventing bacterial attachment to surfaces is the most efficient approach to controlling biofilm proliferation. The aim of this study was to compare anti-adhesion potentials of 5 and 50 mmol/L polyelectrolyte multilayers of poly(allylamine hydrochloride)/poly(sodium 4–styrenesulfonate), poly(4-vinyl-N-ethylpyridinium bromide)/ poly(sodium 4–styrenesulfonate), and poly(4-vinyl-N-isobutylpyridinium bromide)/poly(sodium 4–styrenesulfonate) against Escherichia coli. Glass surface was covered with five polyelectrolyte layers and exposed to bacterial suspensions. Poly(4-vinyl-N-ethylpyridinium bromide)/poly(sodium 4–styrenesulfonate) was the most effective against bacterial adhesion, having reduced it by 60 %, followed by poly(4-vinyl-N-isobutylpyridinium bromide)/poly(sodium 4– styrenesulfonate) (47 %), and poly(allylamine hydrochloride)/poly(sodium 4–styrenesulfonate) (38 %). Polyelectrolyte multilayers with quaternary amine groups have a significant anti-adhesion potential and could find their place in coatings for food, pharmaceutical, and medical industry.
Collapse
|
14
|
Yahata C, Suzuki J, Mochizuki A. Biocompatibility and adhesive strength properties of poly(methyl acrylate-co-acrylic acid) as a function of acrylic acid content. J BIOACT COMPAT POL 2019. [DOI: 10.1177/0883911519877427] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Metals and metal alloys are widely used in medical devices that contact blood and/or tissue, and various coating materials for the metal parts have been proposed to improve surface properties such as biocompatibility. This study aims to understand the performance of new coating materials, copolymers of methyl acrylate and acrylic acid, in terms of their biocompatibility and adhesive strength to a metal surface. Blood compatibility was investigated through platelet and coagulation system responses. Cytocompatibility was studied in three cell-line types (endothelium, smooth muscle, and fibroblasts) in terms of cell viability and morphology; these tests showed that compatibility depended on the cell types and acrylic acid content of the copolymers. Because of their blood compatibility and adhesion strength, the methyl acrylate and acrylic acid copolymers containing 10–24 mol% acrylic acid were found to be excellent candidates as potential coating materials for devices contacting blood.
Collapse
Affiliation(s)
- Chie Yahata
- Department of Biomedical Engineering, School of Engineering, Tokai University, Isehara, Japan
| | - Junya Suzuki
- Department of Biomedical Engineering, School of Engineering, Tokai University, Isehara, Japan
| | - Akira Mochizuki
- Department of Biomedical Engineering, School of Engineering, Tokai University, Isehara, Japan
| |
Collapse
|
15
|
Rodríguez López ADL, Lee MR, Ortiz BJ, Gastfriend BD, Whitehead R, Lynn DM, Palecek SP. Preventing S. aureus biofilm formation on titanium surfaces by the release of antimicrobial β-peptides from polyelectrolyte multilayers. Acta Biomater 2019; 93:50-62. [PMID: 30831325 PMCID: PMC6693497 DOI: 10.1016/j.actbio.2019.02.047] [Citation(s) in RCA: 34] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/30/2018] [Revised: 01/28/2019] [Accepted: 02/27/2019] [Indexed: 02/08/2023]
Abstract
Staphylococcus aureus infections represent the major cause of titanium based-orthopaedic implant failure. Current treatments for S. aureus infections involve the systemic delivery of antibiotics and additional surgeries, increasing health-care costs and affecting patient's quality of life. As a step toward the development of new strategies that can prevent these infections, we build upon previous work demonstrating that the colonization of catheters by the fungal pathogen Candida albicans can be prevented by coating them with thin polymer multilayers composed of chitosan (CH) and hyaluronic acid (HA) designed to release a β-amino acid-based peptidomimetic of antimicrobial peptides (AMPs). We demonstrate here that this β-peptide is also potent against S. aureus (MBPC = 4 μg/mL) and characterize its selectivity toward S. aureus biofilms. We demonstrate further that β-peptide-containing CH/HA thin-films can be fabricated on the surfaces of rough planar titanium substrates in ways that allow mammalian cell attachment and permit the long-term release of β-peptide. β-Peptide loading on CH/HA thin-films was then adjusted to achieve release of β-peptide quantities that selectively prevent S. aureus biofilms on titanium substrates in vitro for up to 24 days and remained antimicrobial after being challenged sequentially five times with S. aureus inocula, while causing no significant MC3T3-E1 preosteoblast cytotoxicity compared to uncoated and film-coated controls lacking β-peptide. We conclude that these β-peptide-containing films offer a novel and promising localized delivery approach for preventing orthopaedic implant infections. The facile fabrication and loading of β-peptide-containing films reported here provides opportunities for coating other medical devices prone to biofilm-associated infections. STATEMENT OF SIGNIFICANCE: Titanium (Ti) and its alloys are used widely in orthopaedic devices due to their mechanical strength and long-term biocompatibility. However, these devices are susceptible to bacterial colonization and the subsequent formation of biofilms. Here we report a chitosan and hyaluronic acid polyelectrolyte multilayer-based approach for the localized delivery of helical, cationic, globally amphiphilic β-peptide mimetics of antimicrobial peptides to inhibit S. aureus colonization and biofilm formation. Our results reveal that controlled release of this β-peptide can selectively kill S. aureus cells without exhibiting toxicity toward MC3T3-E1 preosteoblast cells. Further development of this polymer-based coating could result in new strategies for preventing orthopaedic implant-related infections, improving outcomes of these titanium implants.
Collapse
Affiliation(s)
- Angélica de L Rodríguez López
- Department of Materials Science and Engineering, 1509 University Avenue, University of Wisconsin- Madison, Madison, WI 53706, USA
| | - Myung-Ryul Lee
- Department of Chemical and Biological Engineering, 1415 Engineering Drive, University of Wisconsin- Madison, Madison, WI 53706, USA
| | - Benjamín J Ortiz
- Department of Chemical and Biological Engineering, 1415 Engineering Drive, University of Wisconsin- Madison, Madison, WI 53706, USA
| | - Benjamin D Gastfriend
- Department of Chemical and Biological Engineering, 1415 Engineering Drive, University of Wisconsin- Madison, Madison, WI 53706, USA
| | - Riley Whitehead
- Department of Chemical and Biological Engineering, 1415 Engineering Drive, University of Wisconsin- Madison, Madison, WI 53706, USA
| | - David M Lynn
- Department of Materials Science and Engineering, 1509 University Avenue, University of Wisconsin- Madison, Madison, WI 53706, USA; Department of Chemical and Biological Engineering, 1415 Engineering Drive, University of Wisconsin- Madison, Madison, WI 53706, USA; Department of Chemistry, 1101 University Avenue, University of Wisconsin- Madison, Madison, WI 53706, USA.
| | - Sean P Palecek
- Department of Materials Science and Engineering, 1509 University Avenue, University of Wisconsin- Madison, Madison, WI 53706, USA; Department of Chemical and Biological Engineering, 1415 Engineering Drive, University of Wisconsin- Madison, Madison, WI 53706, USA.
| |
Collapse
|
16
|
Cytotoxicity and bioadhesive properties of poly- N-isopropylacrylamide hydrogel. Heliyon 2019; 5:e01474. [PMID: 31008402 PMCID: PMC6458465 DOI: 10.1016/j.heliyon.2019.e01474] [Citation(s) in RCA: 36] [Impact Index Per Article: 7.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/21/2018] [Revised: 03/11/2019] [Accepted: 04/01/2019] [Indexed: 02/06/2023] Open
Abstract
Several hydrogel surfaces present properties that simulate the mechanical and physicochemical features of extracellular matrix (ECM), providing a platform that mimic the native cellular milieus. Poly-N-isopropylacrylamide (PNIPAM) hydrogels are receiving attention in biomedical field due to their thermosensibility and soft texture. However, more extensive biocompatibility and cellular interactions studies with cell lines are needed. Therefore, the aim of this study is focus on evaluating the biocompatibility of PNIPAM through cytotoxicity, genotoxicity, and proliferation tests in murine preadipose cells (3T3-L1), human embryonic kidney cells (HEK293) and human carcinoma-derived cells (A549) in presence of hydrogel surfaces. Bioadhesive capacity above PNIPAM surfaces was also analyzed. MTT and neutral red uptake assays shown non-cytotoxic effect of PNIPAM in the studied cell lines. Genotoxicity was evaluated by the single-cell gel electrophoresis assay, where DNA damages were not detected. [3H]-thymidine staining allowed to corroborate that cell proliferation had progressed correctly. Adopted morphologies for each cell line over PNIPAM were similar to cell growing observed on polystyrene, indicating that the surfaces favor the cell attachment during 5 days' culture. The good biocompatibility of PNIPAM surfaces make it an interesting scaffold with clinical potential in tissue regeneration engineering, and a possible adipose and kidney tissue-engineered construct.
Collapse
|
17
|
Delgado JD, Surmaitis RL, Arias CJ, Schlenoff JB. Surface sulfonates lock serum albumin into a “hard” corona. Biomater Sci 2019; 7:3213-3225. [DOI: 10.1039/c9bm00475k] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/27/2022]
Abstract
Albumin is more easily displaced on a surface bearing carboxylate compared to sulfonate functionality, which controls the composition of the eventual protein corona.
Collapse
Affiliation(s)
- Jose D. Delgado
- Department of Chemistry and Biochemistry
- Florida State University
- Tallahassee
- USA
| | | | - Carlos J. Arias
- Department of Chemistry and Biochemistry
- Florida State University
- Tallahassee
- USA
| | - Joseph B. Schlenoff
- Department of Chemistry and Biochemistry
- Florida State University
- Tallahassee
- USA
| |
Collapse
|
18
|
Zelikin AN, Ehrhardt C, Healy AM. Materials and methods for delivery of biological drugs. Nat Chem 2018; 8:997-1007. [PMID: 27768097 DOI: 10.1038/nchem.2629] [Citation(s) in RCA: 201] [Impact Index Per Article: 33.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/28/2015] [Accepted: 08/26/2016] [Indexed: 12/23/2022]
Abstract
Biological drugs generated via recombinant techniques are uniquely positioned due to their high potency and high selectivity of action. The major drawback of this class of therapeutics, however, is their poor stability upon oral administration and during subsequent circulation. As a result, biological drugs have very low bioavailability and short therapeutic half-lives. Fortunately, tools of chemistry and biotechnology have been developed into an elaborate arsenal, which can be applied to improve the pharmacokinetics of biological drugs. Depot-type release systems are available to achieve sustained release of drugs over time. Conjugation to synthetic or biological polymers affords long circulating formulations. Administration of biological drugs through non-parenteral routes shows excellent performance and the first products have reached the market. This Review presents the main accomplishments in this field and illustrates the materials and methods behind existing and upcoming successful formulations and delivery strategies for biological drugs.
Collapse
Affiliation(s)
- Alexander N Zelikin
- Department of Chemistry, Aarhus University, Aarhus C 8000, Denmark.,iNano Interdisciplinary Nanoscience Centre, Aarhus University, Aarhus C 8000, Denmark
| | - Carsten Ehrhardt
- School of Pharmacy and Pharmaceutical Sciences, Trinity College Dublin, Dublin 2, Ireland.,Trinity Biomedical Sciences Institute, Trinity College Dublin, Dublin 2, Ireland
| | - Anne Marie Healy
- School of Pharmacy and Pharmaceutical Sciences, Trinity College Dublin, Dublin 2, Ireland.,Synthesis and Solid State Pharmaceutical Centre, School of Pharmacy and Pharmaceutical Sciences, Trinity College Dublin, Dublin 2, Ireland.,Advanced Materials and Bioengineering Research (AMBER) Centre, Trinity College Dublin, Dublin 2, Ireland
| |
Collapse
|
19
|
Chromatin de-condensation by switching substrate elasticity. Sci Rep 2018; 8:12655. [PMID: 30140058 PMCID: PMC6107547 DOI: 10.1038/s41598-018-31023-2] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/10/2018] [Accepted: 07/25/2018] [Indexed: 02/06/2023] Open
Abstract
Mechanical properties of the cellular environment are known to influence cell fate. Chromatin de-condensation appears as an early event in cell reprogramming. Whereas the ratio of euchromatin versus heterochromatin can be increased chemically, we report herein for the first time that the ratio can also be increased by purely changing the mechanical properties of the microenvironment by successive 24 h-contact of the cells on a soft substrate alternated with relocation and growth for 7 days on a hard substrate. An initial contact with soft substrate caused massive SW480 cancer cell death by necrosis, whereas approximately 7% of the cells did survived exhibiting a high level of condensed chromatin (21% heterochromatin). However, four consecutive hard/soft cycles elicited a strong chromatin de-condensation (6% heterochromatin) correlating with an increase of cellular survival (approximately 90%). Furthermore, cell survival appeared to be reversible, indicative of an adaptive process rather than an irreversible gene mutation(s). This adaptation process is associated with modifications in gene expression patterns. A completely new approach for chromatin de-condensation, based only on mechanical properties of the microenvironment, without any drug mediation is presented.
Collapse
|
20
|
Deming TJ, Klok HA, Armes SP, Becker ML, Champion JA, Chen EYX, Heilshorn SC, van Hest JCM, Irvine DJ, Johnson JA, Kiessling LL, Maynard HD, de la Cruz MO, Sullivan MO, Tirrell MV, Anseth KS, Lecommandoux S, Percec S, Zhong Z, Albertsson AC. Polymers at the Interface with Biology. Biomacromolecules 2018; 19:3151-3162. [DOI: 10.1021/acs.biomac.8b01029] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023]
Affiliation(s)
- Timothy J. Deming
- Departments of Bioengineering, Chemistry and Biochemistry, University of California, Los Angeles, California 90095-1600, United States
| | - Harm-Anton Klok
- École Polytechnique Fédérale de Lausanne (EPFL), Institut des Matériaux and Institut des Sciences et Ingénierie Chimiques, Laboratoire des Polymères, Bâtiment MXD, Station 12, CH-1015 Lausanne, Switzerland
| | - Steven P. Armes
- Dainton Building, Department of Chemistry, University of Sheffield, Brook Hill, Sheffield, S3 7HF, South Yorkshire, United Kingdom
| | - Matthew L. Becker
- Department of Polymer Science, The University of Akron, Akron, Ohio 44325-3909, United States
| | - Julie A. Champion
- School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332-2000, United States
| | - Eugene Y.-X. Chen
- Department of Chemistry, Colorado State University, Fort Collins, Colorado 80523-1872, United States
| | - Sarah C. Heilshorn
- Department of Materials Science & Engineering, Stanford University, Stanford, California 94305, United States
| | - Jan C. M. van Hest
- Department of Biomedical Engineering & Department of Chemical Engineering and Chemistry, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven, The Netherlands
| | - Darrell J. Irvine
- Koch Institute for Integrative Cancer Research, Department of Biological Engineering, Department of Materials Science & Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States
| | - Jeremiah A. Johnson
- Department of Chemistry, Program in Polymers and Soft Matter, and Koch Institute for Integrative Cancer Research, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States
| | - Laura L. Kiessling
- Department of Chemistry, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, United States
| | - Heather D. Maynard
- Departments of Bioengineering, Chemistry and Biochemistry, University of California, Los Angeles, California 90095-1600, United States
- California NanoSystems Institute, University of California, Los Angeles, 570 Westwood Plaza, Los Angeles, California 90095-1569, United States
| | - Monica Olvera de la Cruz
- Departments of Materials Science and Engineering, Chemistry, Chemical and Biological Engineering and Physics and Astronomy, Northwestern University, Evanston, Illinois 60208, United States
| | - Millicent O. Sullivan
- Department of Chemical & Biomolecular Engineering, University of Delaware, Newark, Delaware 19716, United States
| | - Matthew V. Tirrell
- Institute for Molecular Engineering, University of Chicago, 5640 South Ellis Avenue, Chicago, Illinois 60637, United States
| | - Kristi S. Anseth
- Department of Chemical and Biological Engineering and the BioFrontiers Institute, University of Colorado Boulder, Boulder, Colorado 80309, United States
| | - Sebastien Lecommandoux
- Laboratoire de Chimie des Polymères Organiques, LCPO, Université de Bordeaux, CNRS, Bordeaux INP, UMR 5629, 16 Avenue Pey Berland F-33600 Pessac, France
| | - Simona Percec
- Department of Chemistry, Temple University, Philadelphia, Pennsylvania 19122, United States
| | - Zhiyuan Zhong
- Biomedical Polymers Laboratory, and Jiangsu Key Laboratory of Advanced Functional Polymer Design and Application, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou, 215123, P. R. China
| | - Ann-Christine Albertsson
- Fibre and Polymer Technology, Royal Institute of Technology, Teknikringen 56-58, SE-100 44 Stockholm, Sweden
| |
Collapse
|
21
|
Landry MJ, Rollet FG, Kennedy TE, Barrett CJ. Layers and Multilayers of Self-Assembled Polymers: Tunable Engineered Extracellular Matrix Coatings for Neural Cell Growth. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2018; 34:8709-8730. [PMID: 29481757 DOI: 10.1021/acs.langmuir.7b04108] [Citation(s) in RCA: 15] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Growing primary cells and tissue in long-term cultures, such as primary neural cell culture, presents many challenges. A critical component of any environment that supports neural cell growth in vivo is an appropriate 2-D surface or 3-D scaffold, typically in the form of a thin polymer layer that coats an underlying plastic or glass substrate and aims to mimic critical aspects of the extracellular matrix. A fundamental challenge to mimicking a hydrophilic, soft natural cell environment is that materials with these properties are typically fragile and are difficult to adhere to and stabilize on an underlying plastic or glass cell culture substrate. In this review, we highlight the current state of the art and overview recent developments of new artificial extracellular matrix (ECM) surfaces for in vitro neural cell culture. Notably, these materials aim to strike a balance between being hydrophilic and soft while also being thick, stable, robust, and bound well to the underlying surface to provide an effective surface to support long-term cell growth. We focus on improved surface and scaffold coating systems that can mimic the natural physicochemical properties that enhance neuronal survival and growth, applied as soft hydrophilic polymer coatings for both in vitro cell culture and for implantable neural probes and 3-D matrixes that aim to enhance stability and longevity to promote neural biocompatibility in vivo. With respect to future developments, we outline four emerging principles that serve to guide the development of polymer assemblies that function well as artificial ECMs: (a) design inspired by biological systems and (b) the employment of principles of aqueous soft bonding and self-assembly to achieve (c) a high-water-content gel-like coating that is stable over time in a biological environment and possesses (d) a low modulus to more closely mimic soft, compliant real biological tissue. We then highlight two emerging classes of thick material coatings that have successfully captured these guiding principles: layer-by-layer deposited water-soluble polymers (LbL) and silk fibroin (SF) materials. Both materials can be deposited from aqueous solution yet transition to a water-insoluble coating for long-term stability while retaining a softness and water content similar to those of biological materials. These materials hold great promise as next-generation biocompatible coatings for tissue engineers and for chemists and biologists within the biomedical field.
Collapse
|
22
|
Hellwig J, Strebe J, V Klitzing R. Effect of environmental parameters on the nano mechanical properties of hyaluronic acid/poly(l-lysine) multilayers. Phys Chem Chem Phys 2018; 20:19082-19086. [PMID: 29972161 DOI: 10.1039/c8cp02621a] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/30/2023]
Abstract
Atomic force microscopy (AFM) was used to determine the mechanical properties as the indentation modulus of native and crosslinked poly(l-lysine) (PLL)/hyaluronic acid (HA) multilayer films by static force measurements. The influence of the surrounding medium on the mechanical properties of the films after preparation is investigated. The indentation modulus of native and crosslinked film was measured at different pH values, ionic strengths and temperatures. The native HA/PLL films, which behave like a physical gel, show the highest values of the indentation modulus for an intermediate pH value and low ionic strength. Any changes in the pH or an increase in the ionic strength/temperature decreases the measured indentation modulus. In contrast, the crosslinked films show an increase by a factor of 80 in the indentation modulus but no response to changes in the pH, ionic strength or temperature; they behave like a chemical gel. The pH, ionic strength and temperature used in this work are close to the in vivo conditions and thus give a fundamental point of view on the nanomechanical response of the PLL/HA films. Furthermore, information about the mechanical properties can be used for the understanding and manipulation of cell adhesion.
Collapse
Affiliation(s)
- Johannes Hellwig
- Stranski-Laboratorium, Department of Chemistry, TU Berlin, Strasse des 17. Juni 124, D-10623, Berlin, Germany
| | | | | |
Collapse
|
23
|
Lee JH, Park BS, Ghang HG, Song H, Yang SY. Nano-Protrusive Gold Nanoparticle-Hybridized Polymer Thin Film as a Sensitive, Multipatternable, and Antifouling Biosensor Platform. ACS APPLIED MATERIALS & INTERFACES 2018; 10:13397-13405. [PMID: 29616552 DOI: 10.1021/acsami.8b03681] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/22/2023]
Abstract
Hybrid films consisting of anisotropic octahedral gold nanoparticles (AuNPs) and polymers had their surfaces functionalized and were immobilized on surface plasmon resonance (SPR) sensors for biomolecule detection. Specifically, carboxylated octahedral AuNPs (C-Oh-AuNPs) and poly(allylamine hydrochloride) (PAH) were assembled as ultrathin films by using a layer-by-layer process. The ionic strength generated from the functional groups of C-Oh-AuNP and PAH influenced the composition, its surface morphology, and the reactivity of the film toward further chemical reactions such as the synthesis of spherical AuNPs (S-AuNPs). We were thus able to control the size and the structure of the C-Oh-AuNP and S-AuNPs converted to nano-raspberry-shaped particles. This hierarchical AuNP hybrid film exhibits much more sensitive and stable detection of biomolecules than regular flat chip systems, and this result may be due to the SPR of the AuNP at its surface being able to markedly enhance the local optical field of the chip. The micropatterning of the hybrid coating was also studied by using a soft lithographic patterning method. We, in particular, worked on creating multiplex patterns having different combinations of shapes and fluorescent colors. We expect our hybrid coating system with multicode biomolecular arrays to be used as a powerful platform for biosensor applications.
Collapse
Affiliation(s)
- Jeong-Hoon Lee
- Department of Polymer Science and Engineering , Chungnam National University , 99 Daehak-Ro , Yuseong-Gu, Daejeon 34134 , Republic of Korea
| | - Byung-Soo Park
- Department of Polymer Science and Engineering , Chungnam National University , 99 Daehak-Ro , Yuseong-Gu, Daejeon 34134 , Republic of Korea
| | - Hyun-Gu Ghang
- Department of Polymer Science and Engineering , Chungnam National University , 99 Daehak-Ro , Yuseong-Gu, Daejeon 34134 , Republic of Korea
| | - Hyunjoon Song
- Department of Chemistry , Korea Advanced Institute of Science and Technology , 291 Daehak-Ro , Yuseong-Gu, Daejeon 34141 , Republic of Korea
| | - Sung Yun Yang
- Department of Polymer Science and Engineering , Chungnam National University , 99 Daehak-Ro , Yuseong-Gu, Daejeon 34134 , Republic of Korea
| |
Collapse
|
24
|
Winther AK, Fejerskov B, ter Meer M, Jensen NB, Dillion R, Schaffer JE, Chandrawati R, Stevens MM, Schultze Kool LJ, Simonsen U, Zelikin AN. Enzyme Prodrug Therapy Achieves Site-Specific, Personalized Physiological Responses to the Locally Produced Nitric Oxide. ACS APPLIED MATERIALS & INTERFACES 2018; 10:10741-10751. [PMID: 29570264 PMCID: PMC5887086 DOI: 10.1021/acsami.8b01658] [Citation(s) in RCA: 27] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/30/2018] [Accepted: 03/15/2018] [Indexed: 05/23/2023]
Abstract
Nitric oxide (NO) is a highly potent but short-lived endogenous radical with a wide spectrum of physiological activities. In this work, we developed an enzymatic approach to the site-specific synthesis of NO mediated by biocatalytic surface coatings. Multilayered polyelectrolyte films were optimized as host compartments for the immobilized β-galactosidase (β-Gal) enzyme through a screen of eight polycations and eight polyanions. The lead composition was used to achieve localized production of NO through the addition of β-Gal-NONOate, a prodrug that releases NO following enzymatic bioconversion. The resulting coatings afforded physiologically relevant flux of NO matching that of the healthy human endothelium. The antiproliferative effect due to the synthesized NO in cell culture was site-specific: within a multiwell dish with freely shared media and nutrients, a 10-fold inhibition of cell growth was achieved on top of the biocatalytic coatings compared to the immediately adjacent enzyme-free microwells. The physiological effect of NO produced via the enzyme prodrug therapy was validated ex vivo in isolated arteries through the measurement of vasodilation. Biocatalytic coatings were deposited on wires produced using alloys used in clinical practice and successfully mediated a NONOate concentration-dependent vasodilation in the small arteries of rats. The results of this study present an exciting opportunity to manufacture implantable biomaterials with physiological responses controlled to the desired level for personalized treatment.
Collapse
Affiliation(s)
- Anna K. Winther
- Department
of Chemistry, Department of Biomedicine, and iNano Interdisciplinary Nanoscience Centre, Aarhus University, Aarhus 8000, Denmark
| | - Betina Fejerskov
- Department
of Chemistry, Department of Biomedicine, and iNano Interdisciplinary Nanoscience Centre, Aarhus University, Aarhus 8000, Denmark
| | - Marja ter Meer
- Department of Radiology and Nuclear Medicine 766, Radboud University Medical Center, Nijmegen 6525, The Netherlands
| | - Najah B.S. Jensen
- Department
of Chemistry, Department of Biomedicine, and iNano Interdisciplinary Nanoscience Centre, Aarhus University, Aarhus 8000, Denmark
| | - Ross Dillion
- Fort Wayne Metals, Research and Development, Fort Wayne 46809, Indiana, United States
| | - Jeremy E. Schaffer
- Fort Wayne Metals, Research and Development, Fort Wayne 46809, Indiana, United States
| | - Rona Chandrawati
- Department
of Materials, Department of Bioengineering, and Institute of Biomedical
Engineering, Imperial College London, London SW7 2AZ, U.K.
| | - Molly M. Stevens
- Department
of Materials, Department of Bioengineering, and Institute of Biomedical
Engineering, Imperial College London, London SW7 2AZ, U.K.
| | - Leo J. Schultze Kool
- Department of Radiology and Nuclear Medicine 766, Radboud University Medical Center, Nijmegen 6525, The Netherlands
| | - Ulf Simonsen
- Department
of Chemistry, Department of Biomedicine, and iNano Interdisciplinary Nanoscience Centre, Aarhus University, Aarhus 8000, Denmark
| | - Alexander N. Zelikin
- Department
of Chemistry, Department of Biomedicine, and iNano Interdisciplinary Nanoscience Centre, Aarhus University, Aarhus 8000, Denmark
| |
Collapse
|
25
|
Guo S, Kwek MY, Toh ZQ, Pranantyo D, Kang ET, Loh XJ, Zhu X, Jańczewski D, Neoh KG. Tailoring Polyelectrolyte Architecture To Promote Cell Growth and Inhibit Bacterial Adhesion. ACS APPLIED MATERIALS & INTERFACES 2018; 10:7882-7891. [PMID: 29437375 DOI: 10.1021/acsami.8b00666] [Citation(s) in RCA: 24] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
An important challenge facing the application of implanted biomaterials for tissue engineering is the need to facilitate desirable tissue interactions with the implant while simultaneously inhibiting bacterial colonization, which can lead to implant-associated infection. In this study, we explore the relevance of the physical parameters of polyelectrolyte multilayers, such as surface charge, wettability, and stiffness, in tissue cell/surface and bacteria/surface interactions, and investigate the tuning of the multilayer architecture to differentially control such interactions. Polyions with different side-chain chemical structures were paired with polyethylenimine to assemble multilayers with parallel control over surface charge and wettability under controlled conditions. The multilayers can be successfully cross-linked to yield stiffer (the apparent Young's modulus was increased more than three times its original value) and more stable films while maintaining parallel control over surface charge and wettability. The initial adhesion and proliferation of 3T3 fibroblast cells were found to be strongly affected by surface charge and wettability on the non-cross-linked multilayers. On the other hand, these cells adhered and proliferated in a manner similar to those on the cross-linked multilayers (apparent Young's modulus ∼2 MPa), regardless of surface charge and wettability. In contrast, Staphylococcus aureus ( S. aureus) and Escherichia coli ( E. coli) adhesion was primarily controlled by surface charge and wettability on both cross-linked and non-cross-linked multilayers. In both cases, negative charge and hydrophilicity inhibited their adhesion. Thus, a surface coating with a relatively high degree of stiffness from covalent cross-linking coupled with negative surface charge and high wettability can serve as an efficient strategy to enhance host cell growth while resisting bacterial colonization.
Collapse
Affiliation(s)
- Shanshan Guo
- NUS Graduate School for Integrative Science and Engineering , National University of Singapore , Kent Ridge, 117576 , Singapore
| | - Min Yi Kwek
- Department of Chemical and Biomolecular Engineering , National University of Singapore , 4 Engineering Drive 4 , 119260 , Singapore
| | - Zi Qian Toh
- Department of Chemical and Biomolecular Engineering , National University of Singapore , 4 Engineering Drive 4 , 119260 , Singapore
| | - Dicky Pranantyo
- Department of Chemical and Biomolecular Engineering , National University of Singapore , 4 Engineering Drive 4 , 119260 , Singapore
| | - En-Tang Kang
- Department of Chemical and Biomolecular Engineering , National University of Singapore , 4 Engineering Drive 4 , 119260 , Singapore
| | - Xian Jun Loh
- Institute of Materials Research and Engineering , A*STAR (Agency for Science, Technology and Research , 2 Fusionopolis Way , 138634 , Singapore
- Department of Materials Science and Engineering , National University of Singapore , 9 Engineering Drive 1 , 117576 , Singapore
- Singapore Eye Research Institute , 11 Third Hospital Avenue , 168751 , Singapore
| | - Xiaoying Zhu
- Department of Environmental Science , Zhejiang University , Hangzhou 310058 , China
| | - Dominik Jańczewski
- Laboratory of Technological Processes, Faculty of Chemistry , Warsaw University of Technology , Noakowskiego 3 , 00-664 Warsaw , Poland
| | - Koon Gee Neoh
- NUS Graduate School for Integrative Science and Engineering , National University of Singapore , Kent Ridge, 117576 , Singapore
- Department of Chemical and Biomolecular Engineering , National University of Singapore , 4 Engineering Drive 4 , 119260 , Singapore
| |
Collapse
|
26
|
Izumrudov VA, Mussabayeva BK, Murzagulova KB. Polyelectrolyte multilayers: preparation and applications. RUSSIAN CHEMICAL REVIEWS 2018. [DOI: 10.1070/rcr4767] [Citation(s) in RCA: 21] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
|
27
|
Geng W, Wang L, Jiang N, Cao J, Xiao YX, Wei H, Yetisen AK, Yang XY, Su BL. Single cells in nanoshells for the functionalization of living cells. NANOSCALE 2018; 10:3112-3129. [PMID: 29393952 DOI: 10.1039/c7nr08556g] [Citation(s) in RCA: 54] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
Inspired by the characteristics of cells in live organisms, new types of hybrids have been designed comprising live cells and abiotic materials having a variety of structures and functionalities. The major goal of these studies is to uncover hybridization approaches that promote cell stabilization and enable the introduction of new functions into living cells. Single-cells in nanoshells have great potential in a large number of applications including bioelectronics, cell protection, cell therapy, and biocatalysis. In this review, we discuss the results of investigations that have focused on the synthesis, structuration, functionalization, and applications of these single-cells in nanoshells. We describe synthesis methods to control the structural and functional features of single-cells in nanoshells, and further develop their applications in sustainable energy, environmental remediation, green biocatalysis, and smart cell therapy. Perceived limitations of single-cells in nanoshells have been also identified.
Collapse
Affiliation(s)
- Wei Geng
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, 122, Luoshi Road, Wuhan, 430070, China.
| | | | | | | | | | | | | | | | | |
Collapse
|
28
|
He T, Jańczewski D, Guo S, Man SM, Jiang S, Tan WS. Stable pH responsive layer-by-layer assemblies of partially hydrolysed poly(2-ethyl-2-oxazoline) and poly(acrylic acid) for effective prevention of protein, cell and bacteria surface attachment. Colloids Surf B Biointerfaces 2018; 161:269-278. [DOI: 10.1016/j.colsurfb.2017.10.031] [Citation(s) in RCA: 15] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/01/2017] [Revised: 09/05/2017] [Accepted: 10/10/2017] [Indexed: 12/21/2022]
|
29
|
Osypova A, Fustin CA, Pradier CM, Landoulsi J, Demoustier-Champagne S. Factors impacting protein adsorption on layer-by-layer assembled stimuli-responsive thin films. Eur Polym J 2017. [DOI: 10.1016/j.eurpolymj.2017.08.019] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/24/2023]
|
30
|
Rivero R, Alustiza F, Capella V, Liaudat C, Rodriguez N, Bosch P, Barbero C, Rivarola C. Physicochemical properties of ionic and non-ionic biocompatible hydrogels in water and cell culture conditions: Relation with type of morphologies of bovine fetal fibroblasts in contact with the surfaces. Colloids Surf B Biointerfaces 2017; 158:488-497. [PMID: 28735221 DOI: 10.1016/j.colsurfb.2017.07.032] [Citation(s) in RCA: 22] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/01/2017] [Revised: 07/06/2017] [Accepted: 07/07/2017] [Indexed: 12/13/2022]
Abstract
Cationic, anionic and non-ionic hydrogels having acrylamide polymer backbones were synthesized via free radical polymerization with N,N-methylenebisacrylamide (BIS) as crosslinker. The chemical structures of the hydrogels were characterized by Fourier Transform Infrared Spectroscopy (FTIR). Physicochemical properties such as swelling kinetic, maximum swelling capacity, volume phase transition temperature (VPTT) and wettability (static water contact angle) of hydrogels swollen in aqueous and cell culture medium, at room and cell culture temperatures were studied. In order to correlate the surface properties of the hydrogels and cellular adhesivity of bovine fetal fibroblasts (BFFs), cellular behaviour was analyzed by inverted fluorescence optical microscopy and atomic force microscopy (AFM). MTT assay demonstrated that the number of viable cells in contact with hydrogels does not significantly change in comparison to a control surface. Flattened and spindle-shaped cells and cell spheroids were the adopted morphologies during first days of culture on different hydrogels. Cell spheroids were easily obtained during the first 5days of culture in contact with PNIPAM-co-20%HMA (poly (N-isopropylacrylamide-co-20%N-acryloyl-tris-(hydroxymethyl)aminomethane)) hydrogel surface. After 15days of culture all hydrogels showed high adhesion and visual proliferation. According to obtained results, non-ionic and hydrophilic surfaces with moderated wettability induce the formation of BFFs cell spheroids. These hydrogel surfaces could be used in clinical and biochemical treatments at laboratory level to cell growth and will allow generating the base for future biotechnologic platform.
Collapse
Affiliation(s)
- Rebeca Rivero
- Chemistry Department, Faculty of Exact, Physical-Chemical and Naturals Sciences. National University of Rio Cuarto-CONICET, Rio Cuarto (Cordoba), Argentina; Molecular Biology Department, Faculty of Exact, Physical Chemical and Naturals Sciences. National University of Rio Cuarto-CONICET, Rio Cuarto (Cordoba), Argentina
| | - Fabrisio Alustiza
- Chemistry Department, Faculty of Exact, Physical-Chemical and Naturals Sciences. National University of Rio Cuarto-CONICET, Rio Cuarto (Cordoba), Argentina; Molecular Biology Department, Faculty of Exact, Physical Chemical and Naturals Sciences. National University of Rio Cuarto-CONICET, Rio Cuarto (Cordoba), Argentina
| | - Virginia Capella
- Chemistry Department, Faculty of Exact, Physical-Chemical and Naturals Sciences. National University of Rio Cuarto-CONICET, Rio Cuarto (Cordoba), Argentina; Molecular Biology Department, Faculty of Exact, Physical Chemical and Naturals Sciences. National University of Rio Cuarto-CONICET, Rio Cuarto (Cordoba), Argentina
| | - Cecilia Liaudat
- Molecular Biology Department, Faculty of Exact, Physical Chemical and Naturals Sciences. National University of Rio Cuarto-CONICET, Rio Cuarto (Cordoba), Argentina
| | - Nancy Rodriguez
- Molecular Biology Department, Faculty of Exact, Physical Chemical and Naturals Sciences. National University of Rio Cuarto-CONICET, Rio Cuarto (Cordoba), Argentina
| | - Pablo Bosch
- Molecular Biology Department, Faculty of Exact, Physical Chemical and Naturals Sciences. National University of Rio Cuarto-CONICET, Rio Cuarto (Cordoba), Argentina
| | - Cesar Barbero
- Chemistry Department, Faculty of Exact, Physical-Chemical and Naturals Sciences. National University of Rio Cuarto-CONICET, Rio Cuarto (Cordoba), Argentina
| | - Claudia Rivarola
- Chemistry Department, Faculty of Exact, Physical-Chemical and Naturals Sciences. National University of Rio Cuarto-CONICET, Rio Cuarto (Cordoba), Argentina.
| |
Collapse
|
31
|
Hu C, Qu Y, Zhan W, Wei T, Cao L, Yu Q, Chen H. A supramolecular bioactive surface for specific binding of protein. Colloids Surf B Biointerfaces 2017; 152:192-198. [DOI: 10.1016/j.colsurfb.2017.01.025] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/31/2016] [Revised: 01/04/2017] [Accepted: 01/14/2017] [Indexed: 12/17/2022]
|
32
|
Kiroshka VV, Petrova VA, Chernyakov DD, Bozhkova YO, Kiroshka KV, Baklagina YG, Romanov DP, Kremnev RV, Skorik YA. Influence of chitosan-chitin nanofiber composites on cytoskeleton structure and the proliferation of rat bone marrow stromal cells. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2017; 28:21. [PMID: 28012155 DOI: 10.1007/s10856-016-5822-2] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/29/2016] [Accepted: 11/28/2016] [Indexed: 06/06/2023]
Abstract
Chitosan scaffolds have gained much attention in various tissue engineering applications, but the effect of their microstructure on cell-material spatial interactions remains unclear. Our objective was to evaluate the effect of chitosan-based matrices doping with chitin nano-whiskers (CNW) on adhesion, spreading, cytoskeleton structure, and proliferation of rat bone marrow stromal cells (BMSCs). The behavior of BMSCs during culture on chitosan-CNW films was determined by the molecular mass, hydrophobicity, porosity, crosslinking degree, protonation degree and molecular structure of the composite chitosan-CNW films. The shape, spreading area, cytoskeleton structure, and proliferation of BMSCs on chitosan matrices with a crystalline structure and high porosity were similar to that observed for BMSCs cultured on polystyrene tissue culture plates. The amorphous polymer structure and high swelling led to a decrease in the spreading area and cell proliferation. Thus, we can control the behavior of cells in culture (adhesion, spreading, and proliferation) by changing the physico-chemical properties of the chitosan-CNW films.
Collapse
Affiliation(s)
- Victoria V Kiroshka
- Institute for Problems of Cryobiology and Cryomedicine of the National Academy of Sciences of Ukraine, Pereyaslavskaya ul. 23, Kharkov, 61015, Ukraine
| | - Valentina A Petrova
- Institute of Macromolecular Compounds of the Russian Academy of Sciences, Bolshoi pr. VO 31, St. Petersburg, 199004, Russian Federation
| | - Daniil D Chernyakov
- Institute of Macromolecular Compounds of the Russian Academy of Sciences, Bolshoi pr. VO 31, St. Petersburg, 199004, Russian Federation
| | - Yulia O Bozhkova
- Institute for Problems of Cryobiology and Cryomedicine of the National Academy of Sciences of Ukraine, Pereyaslavskaya ul. 23, Kharkov, 61015, Ukraine
| | - Katerina V Kiroshka
- Institute for Problems of Cryobiology and Cryomedicine of the National Academy of Sciences of Ukraine, Pereyaslavskaya ul. 23, Kharkov, 61015, Ukraine
| | - Yulia G Baklagina
- Institute of Macromolecular Compounds of the Russian Academy of Sciences, Bolshoi pr. VO 31, St. Petersburg, 199004, Russian Federation
| | - Dmitry P Romanov
- Institute of Silicate Chemistry of the Russian Academy of Sciences, Adm. Makarova nab. 2, St. Petersburg, 199034, Russian Federation
| | - Roman V Kremnev
- Institute of Chemistry, St. Petersburg State University, Universitetskii pr. 26, Petrodvorets, St. Petersburg, 198504, Russian Federation
| | - Yury A Skorik
- Institute of Macromolecular Compounds of the Russian Academy of Sciences, Bolshoi pr. VO 31, St. Petersburg, 199004, Russian Federation.
| |
Collapse
|
33
|
Han B, Ma T, Vergara JH, Palmese GR, Yin J, Lee D, Han L. Non-additive impacts of covalent cross-linking on the viscoelastic nanomechanics of ionic polyelectrolyte complexes. RSC Adv 2017. [DOI: 10.1039/c7ra08514a] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
This study elucidates the influences of adding covalent cross-linking on the nanomechanical viscoelasticity of ionically cross-linked polyelectrolyte networks.
Collapse
Affiliation(s)
- Biao Han
- School of Biomedical Engineering, Science, and Health Systems
- Drexel University
- Philadelphia
- USA
| | - Tianzhu Ma
- School of Biomedical Engineering, Science, and Health Systems
- Drexel University
- Philadelphia
- USA
| | - John H. Vergara
- Department of Chemical and Biological Engineering
- Drexel University
- Philadelphia
- USA
| | - Giuseppe R. Palmese
- Department of Chemical and Biological Engineering
- Drexel University
- Philadelphia
- USA
| | - Jie Yin
- Department of Mechanical Engineering
- Temple University
- Philadelphia
- USA
| | - Daeyeon Lee
- Department of Chemical and Biomolecular Engineering
- University of Pennsylvania
- Philadelphia
- USA
| | - Lin Han
- School of Biomedical Engineering, Science, and Health Systems
- Drexel University
- Philadelphia
- USA
| |
Collapse
|
34
|
Chakrabarti KR, Andorko JI, Whipple RA, Zhang P, Sooklal EL, Martin SS, Jewell CM. Lipid tethering of breast tumor cells enables real-time imaging of free-floating cell dynamics and drug response. Oncotarget 2016; 7:10486-97. [PMID: 26871289 PMCID: PMC4891134 DOI: 10.18632/oncotarget.7251] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/20/2015] [Accepted: 01/26/2016] [Indexed: 02/07/2023] Open
Abstract
Free-floating tumor cells located in the blood of cancer patients, known as circulating tumor cells (CTCs), have become key targets for studying metastasis. However, effective strategies to study the free-floating behavior of tumor cells in vitro have been a major barrier limiting the understanding of the functional properties of CTCs. Upon extracellular-matrix (ECM) detachment, breast tumor cells form tubulin-based protrusions known as microtentacles (McTNs) that play a role in the aggregation and re-attachment of tumor cells to increase their metastatic efficiency. In this study, we have designed a strategy to spatially immobilize ECM-detached tumor cells while maintaining their free-floating character. We use polyelectrolyte multilayers deposited on microfluidic substrates to prevent tumor cell adhesion and the addition of lipid moieties to tether tumor cells to these surfaces through interactions with the cell membranes. This coating remains optically clear, allowing capture of high-resolution images and videos of McTNs on viable free-floating cells. In addition, we show that tethering allows for the real-time analysis of McTN dynamics on individual tumor cells and in response to tubulin-targeting drugs. The ability to image detached tumor cells can vastly enhance our understanding of CTCs under conditions that better recapitulate the microenvironments they encounter during metastasis.
Collapse
Affiliation(s)
- Kristi R Chakrabarti
- Medical Scientist Training Program, University of Maryland School of Medicine, Baltimore, MD 21201, USA.,Graduate Program in Molecular Medicine, University of Maryland School of Medicine, Baltimore, MD 21201, USA.,Marlene and Stewart Greenebaum Cancer Center, University of Maryland School of Medicine, Baltimore, MD 21201, USA
| | - James I Andorko
- Fischell Department of Bioengineering, University of Maryland, College Park, MD 20742, USA
| | - Rebecca A Whipple
- Marlene and Stewart Greenebaum Cancer Center, University of Maryland School of Medicine, Baltimore, MD 21201, USA.,Department of Physiology, University of Maryland School of Medicine, Baltimore, MD 21201, USA
| | - Peipei Zhang
- Fischell Department of Bioengineering, University of Maryland, College Park, MD 20742, USA
| | - Elisabeth L Sooklal
- Fischell Department of Bioengineering, University of Maryland, College Park, MD 20742, USA
| | - Stuart S Martin
- Graduate Program in Molecular Medicine, University of Maryland School of Medicine, Baltimore, MD 21201, USA.,Marlene and Stewart Greenebaum Cancer Center, University of Maryland School of Medicine, Baltimore, MD 21201, USA.,Department of Physiology, University of Maryland School of Medicine, Baltimore, MD 21201, USA
| | - Christopher M Jewell
- Marlene and Stewart Greenebaum Cancer Center, University of Maryland School of Medicine, Baltimore, MD 21201, USA.,Fischell Department of Bioengineering, University of Maryland, College Park, MD 20742, USA.,Department of Microbiology and Immunology, University of Maryland School of Medicine, Baltimore, MD 21201, USA
| |
Collapse
|
35
|
Wei T, Zhan W, Cao L, Hu C, Qu Y, Yu Q, Chen H. Multifunctional and Regenerable Antibacterial Surfaces Fabricated by a Universal Strategy. ACS APPLIED MATERIALS & INTERFACES 2016; 8:30048-30057. [PMID: 27759376 DOI: 10.1021/acsami.6b11187] [Citation(s) in RCA: 85] [Impact Index Per Article: 10.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/21/2023]
Abstract
Development of a versatile strategy for antibacterial surfaces is of great scientific interest and practical significance. However, few methods can be used to fabricate antibacterial surfaces on substrates of different chemistries and structures. In addition, traditional antibacterial surfaces may suffer problems related to the attached dead bacteria. Herein, antibacterial surfaces with multifunctionality and regenerability are fabricated by a universal strategy. Various substrates are first deposited with multilayered films containing guest moieties, which can be further used to incorporate biocidal host molecules, β-cyclodextrin (β-CD) derivatives modified with quaternary ammonium salt groups (CD-QAS). The resulting surfaces exhibit strong biocidal activity to kill more than 95% of attached pathogenic bacteria. Notably, almost all the dead bacteria can be easily removed from the surfaces by simple immersion in sodium dodecyl sulfate, and the regenerated surfaces can be treated with new CD-QAS for continued use. Moreover, when another functional β-CD derivative molecule is co-incorporated together with CD-QAS, the surfaces exhibit both functions simultaneously, and neither specific biofunction and antibacterial activity is compromised by the presence of the other. These results thus present a promising way to fabricate multifunctional and regenerable antibacterial surfaces on diverse materials and devices in the biomedical fields.
Collapse
Affiliation(s)
- Ting Wei
- State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials, College of Chemistry, Chemical Engineering and Materials Science, Soochow University , 199 Ren'ai Road, Suzhou 215123, People's Republic of China
| | - Wenjun Zhan
- State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials, College of Chemistry, Chemical Engineering and Materials Science, Soochow University , 199 Ren'ai Road, Suzhou 215123, People's Republic of China
| | - Limin Cao
- State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials, College of Chemistry, Chemical Engineering and Materials Science, Soochow University , 199 Ren'ai Road, Suzhou 215123, People's Republic of China
| | - Changming Hu
- State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials, College of Chemistry, Chemical Engineering and Materials Science, Soochow University , 199 Ren'ai Road, Suzhou 215123, People's Republic of China
| | - Yangcui Qu
- State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials, College of Chemistry, Chemical Engineering and Materials Science, Soochow University , 199 Ren'ai Road, Suzhou 215123, People's Republic of China
| | - Qian Yu
- State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials, College of Chemistry, Chemical Engineering and Materials Science, Soochow University , 199 Ren'ai Road, Suzhou 215123, People's Republic of China
| | - Hong Chen
- State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials, College of Chemistry, Chemical Engineering and Materials Science, Soochow University , 199 Ren'ai Road, Suzhou 215123, People's Republic of China
| |
Collapse
|
36
|
Hellwig J, Micciulla S, Strebe J, von Klitzing R. Separation of Storage and Loss Modulus of Polyelectrolyte Multilayers on a Nanoscale: A Dynamic AFM Study. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2016; 32:10505-10512. [PMID: 27610635 DOI: 10.1021/acs.langmuir.6b02764] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/05/2023]
Abstract
Atomic force microscopy (AFM) is used to carry out rheology measurements on the nanoscale and to determine the mechanical properties of poly(l-lysine) (PLL)/hyaluronic acid (HA) multilayer films. Storage (G') and loss modulus (G″) of the films are calculated and compared with the values obtained from quartz crystal microbalance with dissipation monitoring measurements (QCM-D). A predominant elastic behavior independently of the applied frequencies (5-100 Hz) is observed for native HA/PLL films consisting of 36 double layer. If the layers are cross-linked, the value of G' increases by 2 orders of magnitude, while the loss modulus becomes negligible, making these films a purely elastic chemical gel. The values of G' and G'' extracted from QCM-D measurements on native films are much higher, due to the different frequency regime of the applied shear stress. However, the viscoelastic ratio from the two methods is the same and proves the elastic dominated response of the multilayer in both frequency regimes.
Collapse
Affiliation(s)
- Johannes Hellwig
- Stranski-Laboratorium, Department of Chemistry, TU Berlin , Strasse des 17. Juni 124, D-10623 Berlin, Germany
| | - Samantha Micciulla
- Stranski-Laboratorium, Department of Chemistry, TU Berlin , Strasse des 17. Juni 124, D-10623 Berlin, Germany
| | - Julia Strebe
- Stranski-Laboratorium, Department of Chemistry, TU Berlin , Strasse des 17. Juni 124, D-10623 Berlin, Germany
| | - Regine von Klitzing
- Stranski-Laboratorium, Department of Chemistry, TU Berlin , Strasse des 17. Juni 124, D-10623 Berlin, Germany
| |
Collapse
|
37
|
Shirbin SJ, Karimi F, Chan NJA, Heath DE, Qiao GG. Macroporous Hydrogels Composed Entirely of Synthetic Polypeptides: Biocompatible and Enzyme Biodegradable 3D Cellular Scaffolds. Biomacromolecules 2016; 17:2981-91. [DOI: 10.1021/acs.biomac.6b00817] [Citation(s) in RCA: 37] [Impact Index Per Article: 4.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/30/2022]
Affiliation(s)
- Steven J. Shirbin
- Polymer Science Group, Department of Chemical
and Biomolecular Engineering, and §Department of Chemical
and Biomolecular Engineering, University of Melbourne, Parkville, Melbourne, Victoria 3010, Australia
| | - Fatemeh Karimi
- Polymer Science Group, Department of Chemical
and Biomolecular Engineering, and §Department of Chemical
and Biomolecular Engineering, University of Melbourne, Parkville, Melbourne, Victoria 3010, Australia
| | - Nicholas Jun-An Chan
- Polymer Science Group, Department of Chemical
and Biomolecular Engineering, and §Department of Chemical
and Biomolecular Engineering, University of Melbourne, Parkville, Melbourne, Victoria 3010, Australia
| | - Daniel E. Heath
- Polymer Science Group, Department of Chemical
and Biomolecular Engineering, and §Department of Chemical
and Biomolecular Engineering, University of Melbourne, Parkville, Melbourne, Victoria 3010, Australia
| | - Greg G. Qiao
- Polymer Science Group, Department of Chemical
and Biomolecular Engineering, and §Department of Chemical
and Biomolecular Engineering, University of Melbourne, Parkville, Melbourne, Victoria 3010, Australia
| |
Collapse
|
38
|
Arias CJ, Surmaitis RL, Schlenoff JB. Cell Adhesion and Proliferation on the "Living" Surface of a Polyelectrolyte Multilayer. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2016; 32:5412-5421. [PMID: 27191244 DOI: 10.1021/acs.langmuir.6b00784] [Citation(s) in RCA: 28] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
The adhesion of living eukaryotic cells to a substrate, one of the most complex problems in surface science, requires adsorption of extracellular proteins such as fibronectin. Thin films of polyelectrolyte complex made layer-by-layer (polyelectrolyte multilayers or PEMUs) offer a high degree of control of surface charge and composition-interconnected and essential variables for protein adhesion. Fibroblasts grown on multilayers of poly(styrenesulfonate), PSS, and poly(diallyldimethylammonium), PDADMA, with increasing thickness exhibit good adhesion until the 12th layer of polyelectrolyte has been added, whereupon there is a sudden transition to nonadhesive behavior. This sharp change is due to the migration of excess positive charge to the surface-a previously unrecognized property of PEMUs. Precise radiotracer assays of adsorbed (125)I-albumin show how protein adsorption is related to multilayer surface charge. With more negative surface charge density from the sulfonates of PSS, more albumin adsorbs to the surface. However, a loosely held or "soft corona" exchanges with serum protein under the Vroman effect, which is correlated with poor cell adhesion. A comprehensive view of cell adhesion highlights the central role of robust protein adhesion, which is required before any secondary effects of matrix stiffness on cell fate can come into play.
Collapse
Affiliation(s)
- Carlos J Arias
- Department of Chemistry and Biochemistry, The Florida State University , Tallahassee, Florida 32306, United States
| | - Richard L Surmaitis
- Department of Chemistry and Biochemistry, The Florida State University , Tallahassee, Florida 32306, United States
| | - Joseph B Schlenoff
- Department of Chemistry and Biochemistry, The Florida State University , Tallahassee, Florida 32306, United States
| |
Collapse
|
39
|
Xing R, Jiao T, Ma K, Ma G, Möhwald H, Yan X. Regulating Cell Apoptosis on Layer-by-Layer Assembled Multilayers of Photosensitizer-Coupled Polypeptides and Gold Nanoparticles. Sci Rep 2016; 6:26506. [PMID: 27211344 PMCID: PMC4876451 DOI: 10.1038/srep26506] [Citation(s) in RCA: 22] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/04/2016] [Accepted: 05/04/2016] [Indexed: 01/20/2023] Open
Abstract
The design of advanced, nanostructured materials by layer-by-layer (LbL) assembly at the molecular level is of great interest because of the broad application of these materials in the biomedical field especially in regulating cell growth, adhesion, movement, differentiation and detachment. Here, we fabricated functional hybrid multilayer films by LbL assembly of biocompatible photosensitizer-coupled polypeptides and collagen-capped gold nanoparticles. The resulting multilayer film can well accommodate cells for adhesion, growth and proliferation. Most significantly, controlled cell apoptosis (detachment) and patterning of the multilayer film is achieved by a photochemical process yielding reactive oxygen species (ROS). Moreover, the site and shape of apoptotic cells can be controlled easily by adjusting the location and shape of the laser beam. The LbL assembled multilayer film with integration of functions provides an efficient platform for regulating cell growth and apoptosis (detachment).
Collapse
Affiliation(s)
- Ruirui Xing
- State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, P. R. China
- Hebei Key Laboratory of Applied Chemistry, School of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao 066004, P. R. China
- National Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, P. R. China
| | - Tifeng Jiao
- State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, P. R. China
- Hebei Key Laboratory of Applied Chemistry, School of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao 066004, P. R. China
| | - Kai Ma
- Hebei Key Laboratory of Applied Chemistry, School of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao 066004, P. R. China
- National Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, P. R. China
| | - Guanghui Ma
- National Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, P. R. China
| | - Helmuth Möhwald
- Max Planck Institute of Colloids and Interfaces, Am Mühlenberg 1, D-14476, Potsdam/Golm, Germany
| | - Xuehai Yan
- National Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, P. R. China
| |
Collapse
|
40
|
Controlling cell adhesion using layer-by-layer approaches for biomedical applications. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2016; 70:1163-1175. [PMID: 27772718 DOI: 10.1016/j.msec.2016.03.074] [Citation(s) in RCA: 71] [Impact Index Per Article: 8.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/11/2016] [Revised: 03/16/2016] [Accepted: 03/21/2016] [Indexed: 12/11/2022]
Abstract
Controlling the adhesion of mammalian and bacterial cells at the interfaces between synthetic materials and biological environments is a real challenge in the biomedical fields such as tissue engineering, antibacterial coating, implantable biomaterials and biosensors. The surface properties of materials are known to profoundly influence the adhesion processes. To mediate the adhesion processes, polymeric coatings have been used to functionalize surfaces to introduce diverse physicochemical properties. The polyelectrolyte multilayer films built via the layer-by-layer (LbL) method, introduced by Moehwald, Decher, and Lvov 20years ago, has led to significant developments ranging from the fundamental understanding of cellular processes to controlling cell adhesion for biomedical applications. In this review, we focus our attention on the modification of surface physicochemical properties, using the LbL approach, to construct films which can either promote or inhibit mammalian/bacterial cell adhesion. We also discuss the emerging field of multifunctional surfaces capable of responding to specific cellular activity but being inert to the others.
Collapse
|
41
|
Xia Y, Cheng C, Wang R, He C, Ma L, Zhao C. Construction of microgels embedded robust ultrafiltration membranes for highly effective bioadhesion resistance. Colloids Surf B Biointerfaces 2016; 139:199-210. [DOI: 10.1016/j.colsurfb.2015.12.018] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/10/2015] [Revised: 11/18/2015] [Accepted: 12/09/2015] [Indexed: 01/22/2023]
|
42
|
What is really driving cell–surface interactions? Layer-by-layer assembled films may help to answer questions concerning cell attachment and response to biomaterials. Biointerphases 2016; 11:019009. [DOI: 10.1116/1.4943046] [Citation(s) in RCA: 24] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022] Open
|
43
|
Jaklenec A, Anselmo AC, Hong J, Vegas AJ, Kozminsky M, Langer R, Hammond PT, Anderson DG. High Throughput Layer-by-Layer Films for Extracting Film Forming Parameters and Modulating Film Interactions with Cells. ACS APPLIED MATERIALS & INTERFACES 2016; 8:2255-2261. [PMID: 26713554 DOI: 10.1021/acsami.5b11081] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
A high-throughput approach which automates the synthesis of polyelectrolyte-based layer-by-layer films (HT-LbL) to facilitate rapid film generation, systematic film characterization, and rational investigations into their interactions with cells is described. Key parameters, such as polyelectrolyte adsorption time and polyelectrolyte deposition pH, were used to modulate LbL film growth to create LbL films of distinct thicknesses using the widely utilized polyelectrolytes poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA). We highlight how HT-LbL can be used to rapidly characterize film-forming parameters and robustly create linearly growing films of various molecular architectures. Film thickness and growth rates of HT-LbL films were shown to increase as a function of adsorption time. Subsequently, we investigated the role that polyelectrolyte solution pH (ranging from 2.5 to 9) has in forming molecularly distinct films of weak polyelectrolytes and report the effect this has on modulating cell attachment and spreading. Films synthesized at PAA-pH of 5.5 and PAH-pH 2.5-5.5 exhibited the highest cellular attachment. These results indicate that HT-LbL is a robust method that can shift the paradigm regarding the use of LbL in biomedical applications as it provides a rapid method to synthesize, characterize, and screen the interactions between molecularly distinct LbL films and cells.
Collapse
Affiliation(s)
- Ana Jaklenec
- David H. Koch Institute for Integrative Cancer Research, Massachusetts Institute of Technology , 500 Main Street, Cambridge, Massachusetts 02139, United States
| | - Aaron C Anselmo
- David H. Koch Institute for Integrative Cancer Research, Massachusetts Institute of Technology , 500 Main Street, Cambridge, Massachusetts 02139, United States
| | - Jinkee Hong
- David H. Koch Institute for Integrative Cancer Research, Massachusetts Institute of Technology , 500 Main Street, Cambridge, Massachusetts 02139, United States
| | - Arturo J Vegas
- David H. Koch Institute for Integrative Cancer Research, Massachusetts Institute of Technology , 500 Main Street, Cambridge, Massachusetts 02139, United States
| | - Molly Kozminsky
- Department of Chemical Engineering, Massachusetts Institute of Technology , 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, United States
| | - Robert Langer
- David H. Koch Institute for Integrative Cancer Research, Massachusetts Institute of Technology , 500 Main Street, Cambridge, Massachusetts 02139, United States
- Department of Chemical Engineering, Massachusetts Institute of Technology , 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, United States
- Institute for Medical Engineering and Science, Massachusetts Institute of Technology , 500 Main Street, Cambridge, Massachusetts 02139, United States
- Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology , 500 Main Street, Cambridge, Massachusetts 02139, United States
| | - Paula T Hammond
- David H. Koch Institute for Integrative Cancer Research, Massachusetts Institute of Technology , 500 Main Street, Cambridge, Massachusetts 02139, United States
- Department of Chemical Engineering, Massachusetts Institute of Technology , 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, United States
| | - Daniel G Anderson
- David H. Koch Institute for Integrative Cancer Research, Massachusetts Institute of Technology , 500 Main Street, Cambridge, Massachusetts 02139, United States
- Department of Chemical Engineering, Massachusetts Institute of Technology , 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, United States
- Institute for Medical Engineering and Science, Massachusetts Institute of Technology , 500 Main Street, Cambridge, Massachusetts 02139, United States
- Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology , 500 Main Street, Cambridge, Massachusetts 02139, United States
| |
Collapse
|
44
|
Colloidal particle assembly using micro-patterning onto morphology-controlled anti-fouling polyelectrolyte multilayer films. Macromol Res 2016. [DOI: 10.1007/s13233-016-4030-8] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/22/2022]
|
45
|
Moura D, Caridade SG, Sousa MP, Cunha E, Rocha HC, Mano JF, Paiva MC, Alves NM. High performance free-standing films by layer-by-layer assembly of graphene flakes and ribbons with natural polymers. J Mater Chem B 2016; 4:7718-7730. [DOI: 10.1039/c6tb02344d] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
In this work, novel free-standing (FS) films based on chitosan, alginate and graphene oxide (GO) were developed through layer-by-layer assembly.
Collapse
Affiliation(s)
- D. Moura
- 3B's Research Group – Biomaterials
- Biodegradables and Biomimetics
- University of Minho
- Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine
- Guimarães
| | - S. G. Caridade
- 3B's Research Group – Biomaterials
- Biodegradables and Biomimetics
- University of Minho
- Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine
- Guimarães
| | - M. P. Sousa
- 3B's Research Group – Biomaterials
- Biodegradables and Biomimetics
- University of Minho
- Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine
- Guimarães
| | - E. Cunha
- Institute for Polymers and Composites/I3N
- Department of Polymer Engineering
- University of Minho
- 4800-058 Guimarães
- Portugal
| | - H. C. Rocha
- 3B's Research Group – Biomaterials
- Biodegradables and Biomimetics
- University of Minho
- Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine
- Guimarães
| | - J. F. Mano
- 3B's Research Group – Biomaterials
- Biodegradables and Biomimetics
- University of Minho
- Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine
- Guimarães
| | - M. C. Paiva
- Institute for Polymers and Composites/I3N
- Department of Polymer Engineering
- University of Minho
- 4800-058 Guimarães
- Portugal
| | - N. M. Alves
- 3B's Research Group – Biomaterials
- Biodegradables and Biomimetics
- University of Minho
- Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine
- Guimarães
| |
Collapse
|
46
|
Martinez JS, Kelly KD, Ghoussoub YE, Delgado JD, Keller III TCS, Schlenoff JB. Cell resistant zwitterionic polyelectrolyte coating promotes bacterial attachment: an adhesion contradiction. Biomater Sci 2016; 4:689-98. [DOI: 10.1039/c5bm00585j] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/10/2023]
Abstract
Polymers of various architectures with zwitterionic functionality have recently been shown to effectively suppress nonspecific fouling of surfaces by proteins and prokaryotic (bacteria) or eukaryotic (mammalian) cells as well as other microorganisms and environmental contaminants.
Collapse
Affiliation(s)
| | - Kristopher D. Kelly
- Department of Chemistry and Biochemistry
- The Florida State University
- Tallahassee
- USA
| | - Yara E. Ghoussoub
- Department of Chemistry and Biochemistry
- The Florida State University
- Tallahassee
- USA
| | - Jose D. Delgado
- Department of Chemistry and Biochemistry
- The Florida State University
- Tallahassee
- USA
| | | | - Joseph B. Schlenoff
- Department of Chemistry and Biochemistry
- The Florida State University
- Tallahassee
- USA
| |
Collapse
|
47
|
Osypova A, Magnin D, Sibret P, Aqil A, Jérôme C, Dupont-Gillain C, Pradier CM, Demoustier-Champagne S, Landoulsi J. Dual stimuli-responsive coating designed through layer-by-layer assembly of PAA-b-PNIPAM block copolymers for the control of protein adsorption. SOFT MATTER 2015; 11:8154-8164. [PMID: 26338028 DOI: 10.1039/c5sm01545f] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
In this paper, we describe the successful construction, characteristics and interaction with proteins of stimuli-responsive thin nanostructured films prepared by layer-by-layer (LbL) sequential assembly of PNIPAM-containing polyelectrolytes and PAH. PAA-b-PNIPAM block copolymers were synthesized in order to benefit from (i) the ionizable properties of PAA, to be involved in the LbL assembly, and (ii) the sensitivity of PNIPAM to temperature stimulus. The impact of parameters related to the structure and size of the macromolecules (their molecular weight and the relative degree of polymerization of PAA and PNIPAM), and the interaction with proteins under physico-chemical stimuli, such as pH and temperature, are carefully investigated. The incorporation of PAA-b-PNIPAM into multilayered films is shown to be successful whatever the block copolymer used, resulting in slightly thicker films than the corresponding (PAA/PAH)n film. Importantly, the protein adsorption studies demonstrate that it is possible to alter the adsorption behavior of proteins on (PAA-b-PNIPAM/PAH)n surfaces by varying the temperature and/or the pH of the medium, which seems to be intimately related to two key factors: (i) the ability of PNIPAM units to undergo conformational changes and (ii) the structural changes of the film made of weak polyelectrolytes. The simplicity of construction of these PNIPAM block copolymer-based LbL coatings on a large range of substrates, combined with their highly tunable features, make them ideal candidates to be employed for various biomedical applications requiring the control of protein adsorption.
Collapse
Affiliation(s)
- A Osypova
- Institute of Condensed Matter and Nanosciences, Bio & Soft Matter, Université catholique de Louvain, Croix du Sud 1 (L7.04.01), 1348, Louvain-la-Neuve, Belgium.
| | | | | | | | | | | | | | | | | |
Collapse
|
48
|
Wytrwal M, Koczurkiewicz P, Zrubek K, Niemiec W, Michalik M, Kozik B, Szneler E, Bernasik A, Madeja Z, Nowakowska M, Kepczynski M. Growth and motility of human skin fibroblasts on multilayer strong polyelectrolyte films. J Colloid Interface Sci 2015; 461:305-316. [PMID: 26407058 DOI: 10.1016/j.jcis.2015.09.039] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/22/2015] [Revised: 09/15/2015] [Accepted: 09/15/2015] [Indexed: 11/29/2022]
Abstract
Polyelectrolyte multilayers (PEMs) have found application in modifying material surfaces to make them adhesive or non-adhesive for animal cells. However, PEMs made of strong polyelectrolytes are not fully recognized in the literature. This study focuses on the interplay between the properties of PEM assembled from strong polyelectrolytes and cell adhesion and motility. Strong polycations (with quaternary ammonium groups) and a polyanion (with sulfonate groups) were obtained by modification of poly(allylamine hydrochloride) (PAH). Two types of multilayer films were assembled from these PAH derivatives and used to investigate the behavior of human skin fibroblasts (HSFs). The effect of surface charge, hydrophobicity, and film thickness on adhesion of HSFs in a serum-containing medium was studied with immunofluorescence microscopy. The results showed that adhesion of HSFs was strongly depended on the chemical functions of the terminal layer, whereas the wettability was not important. The surface of PEM can be strongly cytophobic (the quaternary ammonium terminal groups) or strongly cytophilic (the sulfonate terminal groups). Finally, the motile activity of HSFs seeded on glass coated with a varying number of polymer layers was investigated. It was demonstrated using an in vitro model that coating the substrate with only two polymer layers can considerably increase the average speed of HSFs movement and stimulate cell migration into the wound.
Collapse
Affiliation(s)
- Magdalena Wytrwal
- Academic Centre for Materials and Nanotechnology, AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Krakow, Poland
| | - Paulina Koczurkiewicz
- Department of Cell Biology, Faculty of Biochemistry, Biophysics and Biotechnology, Jagiellonian University, Gronostajowa 7, 30-387 Kraków, Poland; Department of Pharmaceutical Biochermistry, Jagiellonian University Medical College, Medyczna 9, 30-688 Krakow, Poland
| | - Karol Zrubek
- Department of Cell Biology, Faculty of Biochemistry, Biophysics and Biotechnology, Jagiellonian University, Gronostajowa 7, 30-387 Kraków, Poland
| | - Wiktor Niemiec
- Faculty of Materials Science and Ceramics, AGH University of Science and Technology, 30 Mickiewicza Av., 30-059 Kraków, Poland
| | - Marta Michalik
- Department of Cell Biology, Faculty of Biochemistry, Biophysics and Biotechnology, Jagiellonian University, Gronostajowa 7, 30-387 Kraków, Poland
| | - Bartłomiej Kozik
- Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Kraków, Poland
| | - Edward Szneler
- Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Kraków, Poland
| | - Andrzej Bernasik
- Academic Centre for Materials and Nanotechnology, AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Krakow, Poland; Faculty of Physics and Applied Computer Science, AGH University of Science and Technology, 30 Mickiewicza Av., 30-059 Kraków, Poland
| | - Zbigniew Madeja
- Department of Cell Biology, Faculty of Biochemistry, Biophysics and Biotechnology, Jagiellonian University, Gronostajowa 7, 30-387 Kraków, Poland
| | - Maria Nowakowska
- Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Kraków, Poland
| | - Mariusz Kepczynski
- Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Kraków, Poland.
| |
Collapse
|
49
|
Daverey A, Brown KM, Kidambi S. Breast Cancer/Stromal Cells Coculture on Polyelectrolyte Films Emulates Tumor Stages and miRNA Profiles of Clinical Samples. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2015; 31:9991-10001. [PMID: 26270351 DOI: 10.1021/acs.langmuir.5b02227] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
In this study, we demonstrate a method for controlling breast cancer cells adhesion on polyelectrolyte multilayer (PEM) films without the aid of adhesive proteins/ligands to study the role of tumor and stromal cell interaction on cancer biology. Numerous studies have explored engineering coculture of tumor and stromal cells predominantly using transwell coculture of stromal cells cultured onto coverslips that were subsequently added to tumor cell cultures. However, these systems imposed an artificial boundary that precluded cell-cell interactions. To our knowledge, this is the first demonstration of patterned coculture of tumor cells and stromal cells that captures the temporal changes in the miRNA signature as the breast tumor develops through various stages. In our study we used synthetic polymers, namely poly(diallyldimethylammonium chloride) (PDAC) and sulfonated poly(styrene) (SPS), as the polycation and polyanion, respectively, to build PEMs. Breast cancer cells attached and spread preferentially on SPS surfaces while stromal cells attached to both SPS and PDAC surfaces. SPS patterns were formed on PEM surfaces, by either capillary force lithography (CFL) of SPS onto PDAC surfaces or vice versa, to obtain patterns of breast cancer cells and patterned cocultures of breast cancer and stromal cells. In this study, we utilized cancer cells derived from two different tumor stages and two different stromal cells to effectively model a heterogeneous tumor microenvironment and emulate various tumor stages. The coculture model mimics the proliferative index (Ki67 expression) and tumor aggressiveness (HER-2 expression) akin to those observed in clinical tumor samples. We also demonstrated that our patterned coculture model captures the temporal changes in the miRNA-21 and miRNA-34 signature as the breast tumor develops through various stages. The engineered coculture platform lays groundwork toward precision medicine wherein patient-derived tumor cells can be incorporated within our in vitro models to identify potential pathways and drug treatment regimens for individual patients.
Collapse
Affiliation(s)
| | | | - Srivatsan Kidambi
- Mary and Dick Holland Regenerative Medicine Program, University of Nebraska Medical Center , Omaha, Nebraska 68198, United States
| |
Collapse
|
50
|
Influence of charge density and calcium salt on stiffness of polysaccharides multilayer film. Colloids Surf A Physicochem Eng Asp 2015. [DOI: 10.1016/j.colsurfa.2015.03.061] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
|