Catalyst Architecture for Stable Single Atom Dispersion Enables Site-Specific Spectroscopic and Reactivity Measurements of CO Adsorbed to Pt Atoms, Oxidized Pt Clusters, and Metallic Pt Clusters on TiO2

Spatial confinement: An effective strategy to improve H2O and SO2 resistance of the expandable graphite-modified TiO2-supported Pt nanocatalysts for CO oxidation

The expandable graphite (EG) modified TiO2 nanocomposites were prepared by the high shear method using the TiO2 nanoparticles (NPs) and EG as precursors, in which the amount of EG doped in TiO2 was 10 wt.%. Followed by the impregnation method, adjusting the pH of the solution to 10, and using the electrostatic adsorption to achieve spatial confinement, the Pt elements were mainly distributed on the exposed TiO2, thus generating the Pt/10EG-TiO2-10 catalyst. The best CO oxidation activity with the excellent resistance to H2O and SO2 was obtained over the Pt/10EG-TiO2-10 catalyst: CO conversion after 36 hr of the reaction was ca. 85% under the harsh condition of 10 vol.% H2O and 100 ppm SO2 at a high gaseous hourly space velocity (GHSV) of 400,000 hr-1. Physicochemical properties of the catalysts were characterized by various techniques. The results showed that the electrostatic adsorption, which riveted the Pt elements mainly on the exposed TiO2 of the support surface, reduced the dispersion of Pt NPs on EG and achieved the effective dispersion of Pt NPs, hence significantly improving CO oxidation activity over the Pt/10EG-TiO2-10 catalyst. The 10 wt.% EG doped in TiO2 caused the TiO2 support to form a more hydrophobic surface, which reduced the adsorption of H2O and SO2 on the catalyst, greatly inhibited deposition of the TiOSO4 and formation of the PtSO4 species as well as suppressed the oxidation of SO2, thus resulting in an improvement in the resistance to H2O and SO2 of the Pt/10EG-TiO2-10 catalyst.

Asymmetric Pt1O4-Ov Dual Active Sites Induced by NbOx Clusters Promotes CO Synergistical Oxidation

Pt/CeO2 single-atom catalysts are attractive materials for CO oxidation but normally show poor activity below 150 °C mainly due to the unicity of the originally symmetric Pt1O4 structure. In this work, a highly active and stable Pt1/CeO2 single-site catalyst with only 0.1 wt % Pt loading, achieving a satisfied complete conversion of CO at 150 °C, can be obtained through fabricating asymmetric Pt1O4-oxygen vacancies (Ov) dual-active sites induced by well-dispersed NbOx clusters. Specifically, the formation of new Ce-O-Nb interactions weakened the strength of the original Pt-O-Ce bond, thus transferring the originally near-perfect square-planar Pt1O4 into the distorted square-planar one, along with forming abundant Ov around the Pt site. Hence, the promoted CO activation on the asymmetric Pt1O4 structure and the facilitated dissociation of the O2 on the neighboring Ov site synergistically improved the CO catalytic oxidation performance. The fabrication of such asymmetric Pt1O4-Ov double-active sites was also active for the oxidation of other typical hydrocarbons pollutants such as C7H8 and C3H6 from exhaust gases, shedding light on engineering high-efficiency Pt-based oxidation catalysts for low-temperature environmental catalysis.

Engineering Active Sites of Metal/Metal Oxide Catalysts by Oxide Ligand Overlayers

Engineering sites of supported metal catalysts is essential to enhancing activity and selectivity. Such enhancement is typically achieved by particle size modification, surface alloying, or attaching molecular ligands. Yet, control strategies for complex, multifunctional molecules and catalysts, where selectivity is crucial, are lacking. Here, we demonstrate that submonolayer WOx with tunable coverage preferentially decorates well-coordinated Pt terrace sites as a stable ligand. By combining experimental kinetics with probe molecules, in situ spectroscopies, and first-principles modeling, we show that the WOx coverage on Pt modifies the metal-to-acid site balance while retaining the acid strength intact and results in optimal reactivity for metal-acid catalyzed reactions at a specific metal, size, and support-dependent WOx coverage. The oxide can also alter the reactant adsorption mode, reversing selectivity and pathways from terrace- to step-dominated, as evidenced in furfural decarbonylation and hydrogenation. The insights open avenues for improving metal/metal oxide catalysts beyond the specific system.

Interfacial Catalysis at Atomic Level

Heterogeneous catalysts are pivotal to the chemical and energy industries, which are central to a multitude of industrial processes. Large-scale industrial catalytic processes rely on special structures at the nano- or atomic level, where reactions proceed on the so-called active sites of heterogeneous catalysts. The complexity of these catalysts and active sites often lies in the interfacial regions where different components in the catalysts come into contact. Recent advances in synthetic methods, characterization technologies, and reaction kinetics studies have provided atomic-scale insights into these critical interfaces. Achieving atomic precision in interfacial engineering allows for the manipulation of electronic profiles, adsorption patterns, and surface motifs, deepening our understanding of reaction mechanisms at the atomic or molecular level. This mechanistic understanding is indispensable not only for fundamental scientific inquiry but also for the design of the next generation of highly efficient industrial catalysts. This review examines the latest developments in atomic-scale interfacial engineering, covering fundamental concepts, catalyst design, mechanistic insights, and characterization techniques, and shares our perspective on the future trajectory of this dynamic research field.

Does H2 Temperature-Programmed Reduction Always Probe Solid-State Redox Chemistry? The Case of Pt/CeO2

Redox reactions on the surface of transition metal oxides are of broad interest in thermo, photo, and electrocatalysis. H2 temperature-programmed reduction (H2-TPR) is commonly used to probe oxide reducibility by measuring the rate of H2 consumption during temperature ramps, assuming that this rate is controlled by oxide reduction. However, oxide reduction involves several elementary steps, such as H2 dissociation and H-spillover, before surface reduction and H2O formation occur. In this study, we evaluated the kinetics of H2 consumption over CeO2 and Pt/CeO2 with varying Pt loadings and structures to identify the elementary steps probed by H2-TPR. Literature often attributes changes in H2-TPR characteristics with Pt addition to increased CeO2 reducibility. However, our analysis revealed that the H2 consumption rate is measurement of the rate of H-spillover at Pt-CeO2 interfaces and is determined by the concentration of Pt species on Pt nanoclusters that dissociate H2. Therefore, lower temperature H2 consumption observed with Pt addition does not indicate higher CeO2 reducibility. Measurements on samples with mixtures of Pt single-atoms and nanoclusters demonstrated that H2-TPR can effectively quantify dilute Pt nanocluster concentrations, suggesting caution in directly linking H2-TPR characteristics to oxide reducibility while highlighting alternative material insights that can be gleaned.

Understanding the Dynamic Evolution of Active Sites among Single Atoms, Clusters, and Nanoparticles

Catalysis remains a cornerstone of chemical research, with the active sites of catalysts being crucial for their functionality. Identifying active sites, particularly during the reaction process, is crucial for elucidating the relationship between a catalyst's structure and its catalytic property. However, the dynamic evolution of active sites within heterogeneous metal catalysts presents a substantial challenge for accurately pinpointing the real active sites. The advent of in situ and operando characterization techniques has illuminated the path toward understanding the dynamic changes of active sites, offering robust scientific evidence to support the rational design of catalysts. There is a pressing need for a comprehensive review that systematically explores the dynamic evolution among single atoms, clusters, and nanoparticles as active sites during the reaction process, utilizing in situ and operando characterization techniques. This review aims to delineate the effects of various reaction factors on dynamic evolution of active sites among single atoms, clusters, and nanoparticles. Moreover, several in situ and operando techniques are elaborated with emphases on tracking the dynamic evolution of active sites, linking them to catalytic properties. Finally, it discusses challenges and future perspectives in identifying active sites during the reaction process and advancing in situ and operando characterization techniques.

Support work-function dependent Fenton-like catalytic activity of Co single atoms for selective cobalt(IV)=O generation

In Fenton-like reactions, high-valent cobalt-oxo (CoIV=O) has attracted increasing interests due to high redox potential, long lifetime, and anti-interference properties, but its generation is hindered by the electron repulsion between the electron rich oxo- and cobalt centers. Here, we demonstrate CoIV=O generation from peroxymonosulfate (PMS) activation over cobalt single-atom catalysts (Co-SACs) using in-situ Co K-edge X-ray absorption spectra, and discern that CoIV=O generation is dependent on the support work-function (WF) due to the strong electronic metal-support interaction (EMSI). Supports with a high WF value like anatase-TiO2 facilitate the binding of PMS-terminal oxo-ligand to Co sites by extracting Co-d electrons, thus decreasing the generation barrier for the critical intermediate (Co-OOSO32-). The Co atoms anchored on anatase-TiO2 (Co-TiO2) exhibited enhanced CoIV=O generation and superior activity for sulfamethoxazole (SMX) degradation during PMS activation. The normalized steady-state concentration of CoIV=O in Co-TiO2/PMS system was three orders of magnitude higher than that of free radicals, and 1.3- to 11-fold higher than that generated in other Co-SACs/PMS systems. Co-TiO2/PMS sustained efficient removal of SMX with minimal Co2+ leaching under continuous flow operation, suggesting its attractive water purification potential. Overall, these results underscore the significance of support selection for enhanced generation of high-valent metal-oxo species and efficient PMS activation in supported metal SACs.

Toward synergetic reduction of pollutant and greenhouse gas emissions from vehicles: a catalysis perspective

It is a great challenge for vehicles to satisfy the increasingly stringent emission regulations for pollutants and greenhouse gases. Throughout the history of the development of vehicle emission control technology, catalysts have always been in the core position of vehicle aftertreatment. Aiming to address the significant demand for synergistic control of pollutants and greenhouse gases from vehicles, this review provides a panoramic view of emission control technologies and key aftertreatment catalysts for vehicles using fossil fuels (gasoline, diesel, and natural gas) and carbon-neutral fuels (hydrogen, ammonia, and green alcohols). Special attention will be given to the research advancements in catalysts, including three-way catalysts (TWCs), NOx selective catalytic reduction (SCR) catalysts, NOx storage-reduction (NSR) catalysts, diesel oxidation catalysts (DOCs), soot oxidation catalysts, ammonia slip catalysts (ASCs), methane oxidation catalysts (MOCs), N2O abatement catalysts (DeN2O), passive NOx adsorbers (PNAs), and cold start catalysts (CSCs). The main challenges for industrial applications of these catalysts, such as insufficient low-temperature activity, product selectivity, hydrothermal stability, and poisoning resistance, will be examined. In addition, the future development of synergistic control of vehicle pollutants and greenhouse gases will be discussed from a catalysis perspective.

Heterogeneous Catalysis of Molecular-Like Au8M(PPh3)8 n+ Clusters Cultivated in Mesoporous SBA-15

It is a dream of researchers to be able to tailor the catalytic performances by adjusting heterogeneous catalysts at the atomic level. Atomically precise metal clusters provide us with the possibility to achieve this challenge. Here, we design a push-and-pull synthesis strategy coupled with TiOx coating to prepare the heterogeneous catalysts denoted as TiOx/Au8M@SBA via cultivating atomically precise Au8M(PPh3)8 n+ (M=Pd, Pt or Au; n=2 for Pd/Pt and 3 for Au) clusters in mesoporous molecular sieve. The catalysts are made up of the three functional units, which include Au8M(PPh3)8 n+ clusters that can act as the active sites, the pore environment of the SBA-15 that can announce a catalysis show for the clusters with precise number of atoms maintained during the chemical reactions, and the TiOx coating that can further inhibit the migration of the clusters under reaction conditions. The selective hydrogenation of acetylene performed in the fixed-bed reactor taken, for example, we learn how the atom-by-atom tailoring of a heterogeneous catalyst can switch on elusive heterogeneous mechanisms with cluster catalysis. This work sheds light on the fundamental insight into catalysis origin of heterogeneous catalysts and achieves a distinguished level of detail for cluster catalysis.

Selective hydrogenolysis of the Csp2-O bond in the furan ring using hydride-proton pairs derived from hydrogen spillover

Selective hydrogenolysis of biomass-derived furanic compounds is a promising approach for synthesizing aliphatic polyols by opening the furan ring. However, there remains a significant need for highly efficient catalysts that selectively target the Csp2-O bond in the furan ring, as well as for a deeper understanding of the fundamental atomistic mechanisms behind these reactions. In this study, we present the use of Pt-Fe bimetallic catalysts supported on layered double hydroxides [PtFe x /LDH] for the hydrogenolysis of furanic compounds into aliphatic alcohols, achieving over 90% selectivity toward diols and triols. Our findings reveal that the synergy between Pt nanoparticles, atomically dispersed Pt sites and the support facilitates the formation of hydride-proton pair at the Pt δ+⋯O2- Lewis acid-base unit of PtFe x /LDH through hydrogen spillover. The hydride specifically targets the Csp2-O bond in the furan ring, initiating an SN2 reaction and ring cleavage. Moreover, the presence of Fe improves the yield of desired alcohols by inhibiting the adsorption of vinyl groups, thereby suppressing the hydrogenation of the furan ring.

An Active and Regenerable Nanometric High-Entropy Catalyst for Efficient Propane Dehydrogenation

Propane dehydrogenation (PDH) is crucial for propylene production, but commercially employed Pt-based catalysts face susceptibility to deactivation due to the Pt sintering during reaction and regeneration steps. Here, we report a SiO2 supported nanometric (MnCoCuZnPt) high-entropy PDH catalyst with high activity and stability. The catalyst exhibited a super high propane conversion of 56.6 % with 94 % selectivity of propylene at 600 °C. The propylene productivity reached 68.5 molC3H6 ⋅ gPt -1 ⋅ h-1, nearly three times that of Pt/SiO2 (23.5 molC3H6 ⋅ gPt -1 ⋅ h-1) under a weight hourly space velocity of 60 h-1. In a high-entropy nanoparticle, Pt atoms were atomically dispersed through coordination with other metals and exhibited a positive charge, thereby showcasing remarkable catalytic activity. The high-entropy effect contributes to the catalyst a superior stability with a low deactivation constant of 0.0004 h-1 during 200 hours of reaction under the industrial gas composition at 550 °C. Such high-entropy PDH catalyst is easy regenerated through simple air combustion of deposited coke. After the fourth consecutive regeneration cycle, satisfactory catalytic stability was observed, and the element distribution of spent catalysts almost returned to their initial state, with no detectable Pt sintering. This work provides new insights into designing active, stable, and regenerable novel PDH catalysts.

Subsurface Single-Atom Catalyst Enabled by Mechanochemical Synthesis for Oxidation Chemistry

Single-atom catalysts have garnered significant attention due to their exceptional atom utilization and unique properties. However, the practical application of these catalysts is often impeded by challenges such as sintering-induced instability and poisoning of isolated atoms due to strong gas adsorption. In this study, we employed the mechanochemical method to insert single Cu atoms into the subsurface of Fe2O3 support. By manipulating the location of single atoms at the surface or subsurface, catalysts with distinct adsorption properties and reaction mechanisms can be achieved. It was observed that the subsurface Cu single atoms in Fe2O3 remained isolated under both oxidation and reduction environments, whereas surface Cu single atoms on Fe2O3 experienced sintering under reduction conditions. The unique properties of these subsurface single-atom catalysts call for innovations and new understandings in catalyst design.

Electronic communications between active sites on individual metallic nanoparticles in catalysis

Catalytic activity of metal particles is reported to originate from the appearance of nonmetallic states, but conductive metallic particles, as an electron reservoir, should render electron delivery between reactants more favorably so as to have higher activity. We present that metallic rhodium particle catalysts are highly active in the low-temperature oxidation of carbon monoxide, whereas nonmetallic rhodium clusters or monoatoms on alumina remain catalytically inert. Experimental and theoretical results evidence the presence of electronic communications in between vertex atom active sites of individual metallic particles in the reaction. The electronic communications dramatically lower apparent activation energies via coupling two electrochemical-like half-reactions occurring on different active sites, which enable the metallic particles to show turnover frequencies at least four orders of magnitude higher than the nonmetallic clusters or monoatoms. Similar results are found for other metallic particle catalysts, implying the importance of electronic communications between active sites in heterogeneous catalysis.

Natural biomass derived single-atom catalysts for energy and environmental applications

Single atom catalysts (SACs) excel in various chemical processes, including electrocatalysis and industrial chemistry, due to their efficiency. In contrast to chemically synthesized precursors, biomass offers a greener and more cost-effective approach for SACs fabrication. To date, over forty types of SACs have been synthesized using natural sources like starch, cellulose, lignin, hemicellulose, proteins, and chitin. These catalysts incorporate metals such as Fe, Co, Ni, Cu, Zn, Mn, and Pt. This review concentrates on the preparation of SACs from biomass, exploring innovative techniques and their extensive applications in energy conversion and environmental conservation, including but not limited to reactions involving oxygen reduction, oxygen evolution, and hydrogen evolution. It also discusses current challenges and prospective advancements in this domain. This paper updates and expands on the knowledge of SACs derived from biomass, aiming to foster the development of more effective, low-cost catalyst materials from natural sources.

Towards bridging thermo/electrocatalytic CO oxidation: from nanoparticles to single atoms

Proton exchange membrane fuel cells (PEMFCs), as a feasible alternative to replace the traditional fossil fuel-based energy converter, contribute significantly to the global sustainability agenda. At the PEMFC anode, given the high exchange current density, Pt/C is deemed the catalyst-of-choice to ensure that the hydrogen oxidation reaction (HOR) occurs at a sufficiently fast pace. The high performance of Pt/C, however, can only be achieved under the premise that high purity hydrogen is used. For instance, in the presence of trace level carbon monoxide, a typical contaminant during H2 production, Pt is severely deactivated by CO surface blockage. Addressing the poisoning issue necessitates for either developing anti-poisoning electrocatalysts or using pre-purified H2 obtained via a thermo-catalysis route. In other words, the CO poisoning issue can be addressed by either thermal-catalysis from the H2 supply side or electrocatalysis at the user side, respectively. In spite of the distinction between thermo-catalysis and electro-catalysis, there are high similarities between the two routes. Essentially, a reduction in the kinetic barrier for the combination of CO to oxygen containing intermediates is required in both techniques. Therefore, bridging electrocatalysis and thermocatalysis might offer new insight into the development of cutting edge catalysts to solve the poisoning issue, which, however, stands as an underexplored frontier in catalysis science. This review provides a critical appraisal of the recent advancements in preferential CO oxidation (CO-PROX) thermocatalysts and anti-poisoning HOR electrocatalysts, aiming to bridge the gap in cognition between the two routes. First, we discuss the differences in thermal/electrocatalysis, CO oxidation mechanisms, and anti-CO poisoning strategies. Second, we comprehensively summarize the progress of supported and unsupported CO-tolerant catalysts based on the timeline of development (nanoparticles to clusters to single atoms), focusing on metal-support interactions and interface reactivity. Third, we elucidate the stability issue and theoretical understanding of CO-tolerant electrocatalysts, which are critical factors for the rational design of high-performance catalysts. Finally, we underscore the imminent challenges in bridging thermal/electrocatalytic CO oxidation, with theory, materials, and the mechanism as the three main weapons to gain a more in-depth understanding. We anticipate that this review will contribute to the cognition of both thermocatalysis and electrocatalysis.

Exploring the Facet-Dependent Structural Evolution of Pt/CeO2 Catalysts Induced by Typical Pretreatments for CO Oxidation

Atomic-scale insights into the interactions between metals and supports play a crucial role in optimizing catalyst design, understanding catalytic mechanisms, and enhancing chemical conversion processes. The effects of oxide support on the dynamic behavior of supported metal species during pretreatments or reactions have been attracting a lot of attention; however, very less systematic integrations are carried out experimentally using real catalysts. In this study, we here utilized facet-controlled CeO2 as examples to explore their influence on the supported Pt species (1.0 wt %) during the reducing and oxidizing pretreatments that are typically applied in heterogeneous catalysts. By employing a combination of microscopy, spectroscopy, and first-principles calculations, it is demonstrated that the exposed crystal facets of CeO2 govern the evolution behavior of supported Pt species under different environmental conditions. This leads to distinct local coordinations and charge states of the Pt species, which directly influence the catalytic reactivity and can be leveraged to control the catalytic performance for CO oxidation reactions.

Qualitative and quantitative electrochemiluminescence evaluation of trace Pt single-atom in MXenes

The analysis of trace Pt single-atom (SA) represents a significant challenge, given the crucial role of single-atom platinum (Pt) in energy storage and electrocatalysis. Here, we present an electrochemiluminescence (ECL) platform that enables the qualitative and quantitative analysis of trace Pt SA using luminol as the ECL luminophore. It is observed that different Pt species in Ti3-xC2Ty MXenes resulted in distinct reactive oxygen species (ROS) potentials for luminol cathodic electrochemiluminescence (ECL), achieved through distinctive oxygen reduction reaction (ORR) pathways, in which oxygen acts as the co-reactant. Furthermore, the cathodic luminol ECL intensity increases in proportion to the Pt atom content, thereby enabling quantitative analysis of trace Pt single atoms. The detection limit is 0.014 wt%, which is comparable to the current mainstream Pt SA quantification techniques. By utilizing this ECL method, it is possible to successfully evaluate both qualitatively and quantitatively the changes in Pt SA during the ORR processes. This ECL platform provides a valuable toolbox for the analysis of Pt SA catalysts and for the evaluation of the mechanisms involved in electrocatalysis applications.

Unravelling the origin of reaction-driven aggregation and fragmentation of atomically dispersed Pt catalyst on ceria support

Metal-support interaction plays a crucial role in governing the stability and activity of atomically dispersed platinum catalysts on ceria support. The migration and aggregation of platinum atoms during the catalytic reaction leads to the redistribution of active sites. In this study, by utilizing a multimodal characterization scheme, we observed the aggregation of platinum atoms at high temperatures under reverse water gas shift reaction conditions and the subsequent fragmentation of platinum clusters, forming "single atoms" upon cooling. Theoretical simulations of both effects uncovered the roles of carbon monoxide binding on perimeter Pt sites in the clusters and hydrogen coverage in the aggregation and fragmentation mechanisms. This study highlights the complex effects of adsorbate and supports interactions with metal sites in Pt/ceria catalysts that govern their structural transformations under in situ conditions.

Unraveling the Unique Strong Metal-Support Interaction in Titanium Dioxide Supported Platinum Clusters for the Hydrogen Evolution Reaction

Strong metal-support interaction (SMSI) is crucial to modulating the nature of metal species, yet the SMSI behaviors of sub-nanometer metal clusters remain unknown due to the difficulties in constructing SMSI at cluster scale. Herein, we achieve the successful construction of the SMSI between Pt clusters and amorphous TiO2 nanosheets by vacuum annealing, which requires a relatively low temperature that avoids the aggregation of small clusters. In situ scanning transmission electron microscopy observation is employed to explore the SMSI behaviors, and the results reveal the dynamic rearrangement of Pt atoms upon annealing for the first time. The originally disordered Pt atoms become ordered as the crystallizing of the amorphous TiO2 support, forming an epitaxial interface between Pt and TiO2. Such a SMSI state can remain stable in oxidation environment even at 400 °C. Further investigations prove that the electron transfer from TiO2 to Pt occupies the Pt 5d orbitals, which is responsible for the disappeared CO adsorption ability of Pt/TiO2 after forming SMSI. This work not only opens a new avenue for constructing SMSI at cluster scale but also provides in-depth understanding on the unique SMSI behavior, which would stimulate the development of supported metal clusters for catalysis applications.

Visualizing Dynamic Single Atom Catalysis

Many industrial chemical processes, including for producing fuels, foods, pharmaceuticals, chemicals and environmental controls, employ heterogeneous solid state catalysts at elevated temperatures in gas or liquid environments. Dynamic reactions at the atomic level play a critical role in catalyst stability and functionality. In situ visualization and analysis of atomic-scale processes in real time under controlled reaction environments can provide important insights into practical frameworks to improve catalytic processes and materials. This review focuses on innovative real time in situ electron microscopy (EM) methods, including recent progress in analytical in situ environmental (scanning) transmission EM (E(STEM), incorporating environmental scanning TEM (ESTEM) and environmental transmission EM (ETEM), with single atom resolution for visualizing and analysing dynamic single atom catalysis under controlled flowing gas reaction environments. ESTEM studies of single atom dynamics of reactions, and of sintering deactivation, contribute to a better-informed understanding of the yield and stability of catalyst operations. Advances in in situ technologies, including gas and liquid sample holders, nanotomography, and higher voltages, as well as challenges and opportunities in tracking reacting atoms, are highlighted. The findings show that the understanding and application of fundamental processes in catalysis can be improved, with valuable economic, environmental, and societal benefits.

Rutile TiO2-Supported Pt Nanoparticle Catalysts for the Low-Temperature Oxidation of Ethane to Ethanol

Structure-function relationships of supported metal nanoparticle catalysts in the CO-assisted oxidation of ethane to ethanol were investigated. A rutile TiO2-supported Pt nanoparticle catalyst exhibited the highest ethanol production rate and selectivity. During the reaction, sequential changes in the geometric/electronic states and the particle size of the Pt nanoparticles were observed. The comparison of the catalytic performances of model catalysts with controlled metal-support interactions revealed that Pt0 nanoparticles of 2-3 nm with a high fraction of the surface Ptδ+ species are highly active for the oxidation of ethane to ethanol. The coadded CO plays a pivotal role not only in tuning the oxidation state of the surface Pt but also in producing H2O2, which is the true oxidant for the reaction. The supported Pt nanoparticle uses in situ-generated H2O2 to activate ethane, where the C2H5OOH intermediate is formed through a nonradical mechanism and subsequently converted to C2H5OH. This reaction occurs even at 50 °C with an apparent activation energy of 32 kJ mol-1. The present study sheds light on the usefulness of surface-engineered Pt nanoparticles for the low-temperature oxidation of ethane to ethanol.

Enhanced Catalytic Oxidation Reactivity over Atomically Dispersed Pt/CeO2 Catalysts by CO Activation

The elevation of the low-temperature oxidation activity for Pt/CeO2 catalysts is challenging to meet the increasingly stringent requirements for effectively eliminating carbon monoxide (CO) from automobile exhaust. Although reducing activation is a facile strategy for boosting reactivity, past research has mainly concentrated on applying H2 as the reductant, ignoring the reduction capabilities of CO itself, a prevalent component of automobile exhaust. Herein, atomically dispersed Pt/CeO2 was fabricated and activated by CO, which could lower the 90% conversion temperature (T90) by 256 °C and achieve a 20-fold higher CO consumption rate at 200 °C. The activated Pt/CeO2 catalysts showed exceptional catalytic oxidation activity and robust hydrothermal stability under the simulated working conditions for gasoline or diesel exhausts. Characterization results illustrated that the CO activation triggered the formation of a large portion of Pt0 terrace sites, acting as inherent active sites for CO oxidation. Besides, CO activation weakened the Pt-O-Ce bond strength to generate a surface oxygen vacancy (Vo). It served as the oxygen reservoir to store the dissociated oxygen and convert it into active dioxygen intermediates. Conversely, H2 activation failed to stimulate Vo, but triggered a deactivating transformation of the Pt nanocluster into inactive PtxOy in the presence of oxygen. The present work offers coherent insight into the upsurging effect of CO activation on Pt/CeO2, aiming to set up a valuable avenue in elevating the efficiency of eliminating CO, C3H6, and NH3 from automobile exhaust.

Stable and Highly Active Single Atom Configurations for Photocatalytic H2 Generation

The employment of single atoms (SAs), especially Pt SAs, as co-catalysts in photocatalytic H2 generation has gained significant attention due to their exceptional efficiency. However, a major challenge in their application is the light-induced agglomeration of these SAs into less active nanosized particles under photocatalytic conditions. This study addresses the stability and reactivity of Pt SAs on TiO2 surfaces by investigating various post-deposition annealing treatments in air, Ar, and Ar-H2 environments at different temperatures. It is described that annealing in an Ar-H2 atmosphere optimally stabilizes SA configurations, forming stable 2D rafts of assembled SAs ≈0.5-1 nm in diameter. These rafts not only resist light-induced agglomeration but also exhibit significantly enhanced H2 production efficiency. The findings reveal a promising approach to maintaining the high reactivity of Pt SAs while overcoming the critical challenge of their stability under photocatalytic conditions.

Effect of Dynamic and Preferential Decoration of Pt Catalyst Surfaces by WOx on Hydrodeoxygenation Reactions

Catalysts containing Pt nanoparticles and reducible transition-metal oxides (WOx, NbOx, TiOx) exhibit remarkable selectivity to aromatic products in hydrodeoxygenation (HDO) reactions for biomass valorization, contrasting the undesired aromatic hydrogenation typically observed for metal catalysts. However, the active site(s) responsible for the high selectivity remains elusive. Here, theoretical and experimental analyses are combined to explain the observed HDO reactivity by interrogating the organization of reduced WOx domains on Pt surfaces at sub-monolayer coverage. The SurfGraph algorithm is used to develop model structures that capture the configurational space (∼1000 configurations) for density functional theory (DFT) calculations of a W3O7 trimer on stepped Pt surfaces. Machine-learning models trained on the DFT calculations identify the preferential occupation of well-coordinated Pt sites (≥8 Pt coordination number) by WOx and structural features governing WOx-Pt stability. WOx/Pt/SiO2 catalysts are synthesized with varying W loadings to test the theoretical predictions and relate them to HDO reactivity. Spectroscopy- and microscopy-based catalyst characterizations identify the dynamic and preferential decoration of well-coordinated sites on Pt nanoparticles by reduced WOx species, consistent with theoretical predictions. The catalytic consequences of this preferential decoration on the HDO of a lignin model compound, dihydroeugenol, are clarified. The effect of WOx decoration on Pt nanoparticles for HDO involves WOx inhibition of aromatic ring hydrogenation by preferentially blocking well-coordinated Pt sites. The identification of preferential decoration on specific sites of late-transition-metal surfaces by reducible metal oxides provides a new perspective for understanding and controlling metal-support interactions in heterogeneous catalysis.

Dynamic structural evolution of MgO-supported palladium catalysts: from metal to metal oxide nanoparticles to surface then subsurface atomically dispersed cations

Supported noble metal catalysts, ubiquitous in chemical technology, often undergo dynamic transformations between reduced and oxidized states-which influence the metal nuclearities, oxidation states, and catalytic properties. In this investigation, we report the results of in situ X-ray absorption spectroscopy, scanning transmission electron microscopy, and other physical characterization techniques, bolstered by density functional theory, to elucidate the structural transformations of a set of MgO-supported palladium catalysts under oxidative treatment conditions. As the calcination temperature increased, the as-synthesized supported metallic palladium nanoparticles underwent oxidation to form palladium oxides (at approximately 400 °C), which, at approximately 500 °C, were oxidatively fragmented to form mixtures of atomically dispersed palladium cations. The data indicate two distinct types of atomically dispersed species: palladium cations located at MgO steps and those embedded in the first subsurface layer of MgO. The former exhibit significantly higher (>500 times) catalytic activity for ethylene hydrogenation than the latter. The results pave the way for designing highly active and stable supported palladium hydrogenation catalysts with optimized metal utilization.

Boosting Photothermocatalytic Oxidation of Toluene Over Pt/N-TiO2: The Gear Effect of Light and Heat

Photothermal catalysis is extremely promising for the removal of various indoor pollutants owing to its photothermal synergistic effect, while the low light utilization efficiency and unclear catalytic synergistic mechanism hinder its practical applications. Here, nitrogen atoms are introduced, and Pt nanoparticles are loaded on TiO2 to construct Pt/N-TiO2-H2, which exhibits 3.5-fold higher toluene conversion rate than the pure TiO2. Compared to both photocatalytic and thermocatalytic processes, Pt/N-TiO2-H2 exhibited remarkable performance and stability in the photothermocatalytic oxidation of toluene, achieving 98.4% conversion and 98.3% CO2 yield under a light intensity of 260 mW cm-2. Furthermore, Pt/N-TiO2-H2 demonstrated potential practical applicability in the photothermocatalytic elimination of various indoor volatile organic compounds. The synergistic effect occurs as thermocatalysis accelerates the accumulation of carboxylate species and the degradation of aldehyde species, while photocatalysis promotes the generation of aldehyde species and the consumption of carboxylate species. This ultimately enhances the photothermocatalytic process. The photothermal synergistic effect involves the specific conversion of intermediates through the interplay of light and heat, providing novel insights for the design of photothermocatalytic materials and the understanding of photothermal mechanisms.

Switching reactive oxygen species reactions derived from Mn-Pt anchored zeolite for selective catalytic ozonation

Rationally switching reactive oxygen species (ROS) reactions in advanced oxidation processes (AOPs) is urgently needed to improve the adaptability and efficiency for the engineering application. Herein we synthesized bimetallic Mn-Pt catalysts based on zeolite to realize the switching of ROS reactions in catalytic ozonation for sustainable degradation of organic pollutants from water. The ROS reactions switched from singlet oxygen (1O2, 71.01%) to radical-dominated (93.79%) pathway by simply introducing defects and changing Pt/Mn ratios. The oxygen vacancy induced by anchoring Mn-Pt species from zeolite external surface (MnPt/H-Beta) to internal framework (MnPt@Si-Beta) exposes more electron-rich Pt2+/Pt4+ redox sites, accelerating the decomposition of O3 to generate •OH via electron transfer and switching ROS reactions. The Mn site acted as a bridge plays a critical role in conducting electrons from organic pollutants to Pt sites, which solidly solves the electron loss of catalysts, facilitating the efficient degradation of pollutants. A 34.7-fold increase in phenol degradation compared with the non-catalytic ozonation and an excellent catalytic stability are achieved by MnPt@Si-Beta/O3. The 1O2-dominated ROS reaction originated from MnPt/H-Beta/O3 exhibits superior performances in anti-interference for Cl-, HCO3-, NO3-, and SO4-. This work establishes a novel strategy for switching ROS reactions to expand the targeted applications of O3 based AOPs for environmental remediation.

Structured Catalysts and Catalytic Processes: Transport and Reaction Perspectives

The structure of catalysts determines the performance of catalytic processes. Intrinsically, the electronic and geometric structures influence the interaction between active species and the surface of the catalyst, which subsequently regulates the adsorption, reaction, and desorption behaviors. In recent decades, the development of catalysts with complex structures, including bulk, interfacial, encapsulated, and atomically dispersed structures, can potentially affect the electronic and geometric structures of catalysts and lead to further control of the transport and reaction of molecules. This review describes comprehensive understandings on the influence of electronic and geometric properties and complex catalyst structures on the performance of relevant heterogeneous catalytic processes, especially for the transport and reaction over structured catalysts for the conversions of light alkanes and small molecules. The recent research progress of the electronic and geometric properties over the active sites, specifically for theoretical descriptors developed in the recent decades, is discussed at the atomic level. The designs and properties of catalysts with specific structures are summarized. The transport phenomena and reactions over structured catalysts for the conversions of light alkanes and small molecules are analyzed. At the end of this review, we present our perspectives on the challenges for the further development of structured catalysts and heterogeneous catalytic processes.

Modulating the Electronic States of Pt Nanoparticles on Reducible Metal-Organic Frameworks for Boosting the Oxidation of Volatile Organic Compounds

The adsorption and activation of pollutant molecules and oxygen play a critical role in the oxidation reaction of volatile organic compounds (VOCs). In this study, superior adsorption and activation ability was achieved by modulating the interaction between Pt nanoparticles (NPs) and UiO-66 (U6) through the spatial position effect. Pt@U6 exhibits excellent activity in toluene, acetone, propane, and aldehyde oxidation reactions. Spectroscopic studies, 16O2/18O2 kinetic isotopic experiments, and density functional theory (DFT) results jointly reveal that the encapsulated Pt NPs of Pt@U6 possess higher electron density and d-band center, which is conducive for the adsorption and dissociation of oxygen. The toluene oxidation reaction and DFT results indicate that Pt@U6 is more favorable to activate the C-H of toluene and the C═C of maleic anhydride, while Pt/U6 with lower electron density and d-band center exhibits a higher oxygen dissociation temperature and higher reactant activation energy barriers. This study provides a deep insight into the architecture-performance relation of Pt-based catalysts for the catalytic oxidation of VOCs.

Photocatalytic H2 Generation: Controlled and Optimized Dispersion of Single Atom Co-Catalysts Based on Pt-TCPP Planar Adsorption on TiO2

When using single atoms (SAs) as a co-catalyst in photocatalytic H2 generation, achieving a well-dispersed, evenly distributed and adjustable SA surface density on a semiconductor surface is a challenging task. In the present work we use the planar adsorption of tetrakis-(4-carboxyphenyl)-porphyrin (TCPP) and its platinum coordinated analogue, Pt-TCPP, onto anatase TiO2 surfaces to establish a spatially controlled decoration of SAs. We show that the surface Pt SA density can be very well controlled by co-adsorption of Pt-TCPP and TCPP in the planar monolayer regime, and by adjusting the Pt-TCPP to TCPP ratio a desired well dispersed surface density of SAs up to 2.6×105  atoms μm-2 can be established (which is the most effective Pt SA loading for photocatalysis). This distribution and the SA state are maintained after a thermal treatment in air, and an optimized SA density as well as a most active form of Pt for photocatalytic H2 evolution can be established and maintained.

General Pyrolysis for High-Loading Transition Metal Single Atoms on 2D-Nitro-Oxygeneous Carbon as Efficient ORR Electrocatalysts

Single-atom catalysts (SACs) possess the potential to involve the merits of both homogeneous and heterogeneous catalysts altogether and thus have gained considerable attention. However, the large-scale synthesis of SACs with rich isolate-metal sites by simple and low-cost strategies has remained challenging. In this work, we report a facile one-step pyrolysis that automatically produces SACs with high metal loading (5.2-15.9 wt %) supported on two-dimensional nitro-oxygenated carbon (M1-2D-NOC) without using any solvents and sacrificial templates. The method is also generic to various transition metals and can be scaled up to several grams based on the capacity of the containers and furnaces. The high density of active sites with N/O coordination geometry endows them with impressive catalytic activities and stability, as demonstrated in the oxygen reduction reaction (ORR). For example, Fe1-2D-NOC exhibits an onset potential of 0.985 V vs RHE, a half-wave potential of 0.826 V, and a Tafel slope of -40.860 mV/dec. Combining the theoretical and experimental studies, the high ORR activity could be attributed its unique FeO-N3O structure, which facilitates effective charge transfer between the surface and the intermediates along the reaction, and uniform dispersion of this active site on thin 2D nanocarbon supports that maximize the exposure to the reactants.

Dynamic Behavior of Platinum Atoms and Clusters in the Native Oxide Layer of Aluminum Nanocrystals

Strong metal-support interactions (SMSIs) are well-known in the field of heterogeneous catalysis to induce the encapsulation of platinum (Pt) group metals by oxide supports through high temperature H2 reduction. However, demonstrations of SMSI overlayers have largely been limited to reducible oxides, such as TiO2 and Nb2O5. Here, we show that the amorphous native surface oxide of plasmonic aluminum nanocrystals (AlNCs) exhibits SMSI-induced encapsulation of Pt following reduction in H2 in a Pt structure dependent manner. Reductive treatment in H2 at 300 °C induces the formation of an AlOx SMSI overlayer on Pt clusters, leaving Pt single-atom sites (Ptiso) exposed available for catalysis. The remaining exposed Ptiso species possess a more uniform local coordination environment than has been observed on other forms of Al2O3, suggesting that the AlOx native oxide of AlNCs presents well-defined anchoring sites for individual Pt atoms. This observation extends our understanding of SMSIs by providing evidence that H2-induced encapsulation can occur for a wider variety of materials and should stimulate expanded studies of this effect to include nonreducible oxides with oxygen defects and the presence of disorder. It also suggests that the single-atom sites created in this manner, when combined with the plasmonic properties of the Al nanocrystal core, may allow for site-specific single-atom plasmonic photocatalysis, providing dynamic control over the light-driven reactivity in these systems.

Significance of Epitaxial Growth of PtO2 on Rutile TiO2 for Pt/TiO2 Catalysts

TiO2-supported Pt species have been widely applied in numerous critical reactions involving photo-, thermo-, and electrochemical-catalysis for decades. Manipulation of the state of the Pt species in Pt/TiO2 catalysts is crucial for fine-tuning their catalytic performance. Here, we report an interesting discovery showing the epitaxial growth of PtO2 atomic layers on rutile TiO2, potentially allowing control of the states of active Pt species in Pt/TiO2 catalysts. The presence of PtO2 atomic layers could modulate the geometric configuration and electronic state of the Pt species under reduction conditions, resulting in a spread of the particle shape and obtaining a Pt/PtO2/TiO2 structure with more positive valence of Pt species. As a result, such a catalyst exhibits exceptional electrocatalytic activity and stability toward hydrogen evolution reaction, while also promoting the thermocatalytic CO oxidation, surpassing the performance of the Pt/TiO2 catalyst with no epitaxial structure. This novel epitaxial growth of the PtO2 structure on rutile TiO2 in Pt/TiO2 catalysts shows its potential in the rational design of highly active and economical catalysts toward diverse catalytic reactions.

Spontaneous Reconstruction of Copper Active Sites during the Alkaline CORR: Degradation and Recovery of the Performance

Understanding the reconstruction of electrocatalysts under operational conditions is essential for studying their catalytic mechanisms and industrial applications. Herein, using spatiotemporally resolved Raman spectroscopy with CO as a probe molecule, we resolved the spontaneous reconstruction of Cu active sites during cathodic CO reduction reactions (CORRs). Quasi-in situ focused ion beam transmission electron microscopy (FIB-TEM) revealed that under prolonged electrolysis, the Cu surface can reconstruct to form nanometer-sized Cu particles with (111)/(100) facets and abundant grain boundaries, which strongly favor the formation of an inactive *CObridge binding site and deteriorate the CORR performance. A short period of anodic oxidation can efficiently remove these reconstructed nanoparticles by quick dissolution of Cu, thus providing an effective strategy to regenerate the Cu catalysts and recover their CORR performance. This study provides real-time in situ observations of Cu reconstruction and changes in the binding of key reaction intermediates, highlighting the decisive role of the local active site, rather than the macroscopic morphology, on adsorption of key reaction intermediates and thus CORR performance.

Role of the In-Situ-Formed Surface (Pt-S-O)-Ti Active Structure in SO2-Promoted C3H8 Combustion over a Pt/TiO2 Catalyst

Typically, SO2 unavoidably deactivates catalysts in most heterogeneous catalytic oxidations. However, for Pt-based catalysts, SO2 exhibits an extraordinary boosting effect in propane catalytic oxidation, but the promotive mechanism remains contentious. In this study, an in situ-formed tactful (Pt-S-O)-Ti structure was concluded to be a key factor for Pt/TiO2 catalysts with a substantial SO2 tolerance ability. The experiments and theoretical calculations confirm that the high degree of hybridization and orbital coupling between Pt 5d and S 3p orbitals enable more charge transfer from Pt to S species, thus forming the (Pt-S-O)-Ti structure with the oxygen atom dissociated from the chemisorbed O2 adsorbed on oxygen vacancies. The active oxygen atom in the (Pt-S-O)-Ti active structure is a robust site for C3H8 adsorption, leading to a better C3H8 combustion performance. This work can provide insights into the rational design of chemical bonds for high SO2 tolerance catalysts, thereby improving economic and environmental benefits.

Construction of Monoatomic-Modified Defective Ti4+αTi3+1-αO2-δ Nanofibers for Photocatalytic Oxidation of HMF to Valuable Chemicals

Efficiently upgrading 5-hydroxymethylfurfural (HMF) into high-value-added products, such as 2,5-diformylfuran (DFF) and 2,5-furan dicarboxylic acid (FDCA), through a photocatalytic process by using solar energy has been incessantly pursued worldwide. Herein, a series of transition-metal (TM = Ni, Fe, Co, Cu) single atoms were supported on Ti4+αTi3+1-αO2-δ nanofibers (NFs) with certain defects (Ov), denoted as TM SAC-Ti4+αTi3+1-αO2-δ NFs (TM = Ni, Fe, Co, Cu), aiming to enhance the photocatalytic conversion of HMF. A super HMF conversion rate of 57% and a total yield of 1718.66 μmol g-1 h-1 (DFF and FDCA) surpassing that of the Ti4+αTi3+1-αO2-δ NFs by 1.6 and 2.1 times, respectively, are realized when TM is Co (Co SAC-Ti4+αTi3+1-αO2-δ NFs). Experiments combined with density functional theory calculation (DFT) demonstrate that the TM single atoms occupy the Ti site of Ti4+αTi3+1-αO2-δ NFs, which plays a dominant role in the photo-oxidation of HMF. Raman, X-ray photoelectron spectroscopy (XPS), and electron paramagnetic resonance (EPR) characterizations confirm the strong electron local exchange interaction in TM SAC-Ti4+αTi3+1-αO2-δ NFs and demonstrate the substitution of Ti by the TM SACs. The projected density of states and charge density difference reveal that the strong interaction between metal-3d and O-2p orbitals forms Ti-O-TM bonds. The bonds are identified as the adsorption site, where TM single atoms on the surface of Ti4+αTi3+1-αO2-δ NFs reduce HMF molecule adsorption energy (Eads). Furthermore, the TM single atom modulates the electronic structure of TM SAC-Ti4+αTi3+1-αO2-δ NFs through electron transfer, leading to narrow band gaps of the photocatalysts and enhancing their photocatalytic performance. This study has uncovered a newer strategy for enhancing the photocatalytic attributes of semiconducting materials.

Distribution of Pt single atom coordination environments on anatase TiO2 supports controls reactivity

Single-atom catalysts (SACs) offer efficient metal utilization and distinct reactivity compared to supported metal nanoparticles. Structure-function relationships for SACs often assume that active sites have uniform coordination environments at particular binding sites on support surfaces. Here, we investigate the distribution of coordination environments of Pt SAs dispersed on shape-controlled anatase TiO2 supports specifically exposing (001) and (101) surfaces. Pt SAs on (101) are found on the surface, consistent with existing structural models, whereas those on (001) are beneath the surface after calcination. Pt SAs under (001) surfaces exhibit lower reactivity for CO oxidation than those on (101) surfaces due to their limited accessibility to gas phase species. Pt SAs deposited on commercial-TiO2 are found both at the surface and in the bulk, posing challenges to structure-function relationship development. This study highlights heterogeneity in SA coordination environments on oxide supports, emphasizing a previously overlooked consideration in the design of SACs.

Selectivity regulation of CO2 photoreduction via the electron configuration of active sites on single-atom photocatalysts

The major challenge in the photocatalytic reduction of CO2 is to achieve high conversion efficiency while maintaining selectivity for a single product. Photocatalysts containing single-metal Cu2+ with 3d9 and Zn2+ with 3d10 on g-C3N4 were prepared using a high-energy ball mill. Single-atom Zn inner electron configuration is stable (3d10) and the peripheral empty orbitals act as electron traps to trap photo-generated electrons and improve the efficiency of charge separation; Zn is an active site to enhance the adsorption and activation of CO2. The stable electron configuration can reduce the energy required for the overall reaction and increase the activity while changing the reaction pathway to form CO. As a result, the 0.5 mol% Zn/g-C3N4 (Zn-CN-0.5) photocatalyst achieves ∼100 % selectivity for the photocatalytic reduction of CO2 to CO at a rate of ∼21.1 μmol·g-1·h-1. In contrast, the 0.5 mol% Cu/g-C3N4 (Cu-CN-0.5) photocatalyst with an unstable electronic structure does not exhibit high selectivity.

Efficient propane mineralization over unsaturated Pd cluster/CeO2 with prominent C-C cleavage capacity driven by inherent oxygen activation ability

Light alkanes extensively presented in industrial exhausts have led tremendous harm to the atmospheric environment and human health. However, the catalytic destruction of light alkanes generally operates at elevated temperatures and the consequent reaction by-products are inevitably produced. It is therefore of great significance to engineer catalysts with superior thermal stability, internal activity and selectivity. Herein, we developed a Pd cluster/CeO2 catalyst (Pdn/CeO2) by a scalable deposition precipitation strategy, which demonstrates unexpected activity and thermal stability in the presence of 5% H2O attributing to abundant unsaturated Pd metal sites and excellent oxygen dissociation performance. Pdn/CeO2 possesses a highly efficient C-C cleavage capability due to the persistent formation of a large number of oxygen vacancies. In comparison, the Pd1/CeO2 catalyst, which is preferential for C-H bond cleavage and inactive for C-C bond cracking, produces remarkable hazardous organic by-products such as propyne and propylene, inhibiting the continuous decomposition of propane. The present study sheds critical insights into engineering efficient and stable catalysts for light alkane destruction.

Migration and aggregation of Pt atoms on metal oxide-supported ceria nanodomes control reverse water gas shift reaction activity

Single-atom catalysts (SACs) are particularly sensitive to external conditions, complicating the identification of catalytically active species and active sites under in situ or operando conditions. We developed a methodology for tracing the structural evolution of SACs to nanoparticles, identifying the active species and their link to the catalytic activity for the reverse water gas shift (RWGS) reaction. The new method is illustrated by studying structure-activity relationships in two materials containing Pt SACs on ceria nanodomes, supported on either ceria or titania. These materials exhibited distinctly different activities for CO production. Multimodal operando characterization attributed the enhanced activity of the titania-supported catalysts at temperatures below 320 ˚C to the formation of unique Pt sites at the ceria-titania interface capable of forming Pt nanoparticles, the active species for the RWGS reaction. Migration of Pt nanoparticles to titania support was found to be responsible for the deactivation of titania-supported catalysts at elevated temperatures. Tracking the migration of Pt atoms provides a new opportunity to investigate the activation and deactivation of Pt SACs for the RWGS reaction.

The Role of In Situ/Operando IR Spectroscopy in Unraveling Adsorbate-Induced Structural Changes in Heterogeneous Catalysis

Heterogeneous catalysts undergo thermal- and/or adsorbate-induced dynamic changes under reaction conditions, which consequently modify their catalytic behavior. Hence, it is increasingly crucial to characterize the properties of a catalyst under reaction conditions through the so-called "operando" approach. Operando IR spectroscopy is probably one of the most ubiquitous and versatile characterization methods in the field of heterogeneous catalysis, but its potential in identifying adsorbate- and thermal-induced phenomena is often overlooked in favor of other less accessible methods, such as XAS spectroscopy and high-resolution microscopy. Without detracting from these techniques, and while aware of the enormous value of a multitechnique approach, the purpose of this Review is to show that IR spectroscopy alone can provide relevant information in this field. This is done by discussing a few selected case studies from our own research experience, which belong to the categories of both "single-site"- and nanoparticle-based catalysts.

Ultra-small Mo-Pt subnanoparticles enable CO2 hydrogenation at room temperature and atmospheric pressure

We present a partially-oxidised bimetallic Mo-Pt subnanoparticle (Mo4Pt8Ox) enabling thermally-driven CO2 hydrogenation to CO at room temperature and atmospheric pressure. A mechanistic study explained the full catalytic cycle of the reaction from CO2 activation to catalyst reactivation. DFT calculations revealed that alloying with Mo lowers the activation barrier by weakening the CO adsorption. This finding could be a first step for low-energy CO2 conversion.

Single-Atom and Dual-Atom Electrocatalysts: Synthesis and Applications

Distinguishing themselves from nanostructured catalysts, single-atom catalysts (SACs) typically consist of positively charged single metal and coordination atoms without any metal-metal bonds. Dual-atom catalysts (DACs) have emerged as extended family members of SACs in recent years. Both SACs and DACs possess characteristics that combine both homogeneous and heterogeneous catalysis, offering advantages such as uniform active sites and adjustable interactions with ligands, while also inheriting the high stability and recyclability associated with heterogeneous catalyst systems. They offer numerous advantages and are extensively utilized in the field of electrocatalysis, so they have emerged as one of the most prominent material research platforms in the direction of electrocatalysis. This review provides a comprehensive review of SACs and DACs in the field of electrocatalysis: encompassing economic production, elucidating electrocatalytic reaction pathways and associated mechanisms, uncovering structure-performance relationships, and addressing major challenges and opportunities within this domain. Our objective is to present novel ideas for developing advanced synthesis strategies, precisely controlling the microstructure of catalytic active sites, establishing accurate structure-activity relationships, unraveling potential mechanisms underlying electrocatalytic reactions, identifying more efficient reaction paths, and enhancing overall performance in electrocatalytic reactions.

Stepwise assembly of thiacalix[4]arene-protected Ag/Ti bimetallic nanoclusters: accurate identification of catalytic Ag sites in CO2 electroreduction

The accurate identification of catalytic sites in heterogeneous catalysts poses a significant challenge due to the intricate nature of controlling interfacial chemistry at the molecular level. In this study, we introduce a novel strategy to address this issue by utilizing a thiacalix[4]arene (TC4A)-protected Ti-oxo core as a template for loading Ag1+ ions, leading to the successful synthesis of a unique Ag/Ti bimetallic nanocluster denoted as Ti8Ag8. This nanocluster exhibits multiple surface-exposed Ag sites and possesses a distinctive "core-shell" structure, consisting of a {Ti4@Ag8(TC4A)4} core housing a {Ti2O2@Ag4(TC4A)2} motif and two {Ti@Ag2(TC4A)} motifs. To enable a comprehensive analysis, we also prepared a Ti2Ag4 cluster with the same {Ti2O2@Ag4(TC4A)2} structure found within Ti8Ag8. The structural disparities between Ti8Ag8 and Ti2Ag4 provide an excellent platform for a comparison of catalytic activity at different Ag sites. Remarkably, Ti8Ag8 exhibits exceptional performance in the electroreduction of CO2 (eCO2RR), showcasing a CO faradaic efficiency (FECO) of 92.33% at -0.9 V vs. RHE, surpassing the FECO of Ti2Ag4 (69.87% at -0.9 V vs. RHE) by a significant margin. Through density functional theory (DFT) calculations, we unveil the catalytic mechanism and further discover that Ag active sites located at {Ti@Ag2(TC4A)} possess a higher εd value compared to those at {Ti2O2@Ag4(TC4A)2}, enhancing the stabilization of the *COOH intermediate during the eCO2RR. This study provides valuable insights into the accurate identification of catalytic sites in bimetallic nanoclusters and opens up promising avenues for efficient CO2 reduction catalyst design.

Hydrogen Evolution Reaction on Single-Atom Pt Doped in Ni Matrix under Strong Alkaline Condition

Pt catalyst has been considered as the state-of-the-art catalyst for hydrogen evolution reaction (HER) under acid condition. However, its catalytic kinetics under alkaline conditions is not well-understood. Herein, we report a Ni-Pt(SAs) (SAs = single atoms) catalyst with Pt atomically dispersed in a Ni matrix, and it possesses an impressive HER performance with an overpotential as low as 210 mV at 500 mA cm-2 in strong alkaline electrolyte (7 M KOH), which is much higher than Pt nanoparticle-modified Ni catalyst (Ni-Pt(NPs)). Kinetics analysis reveals that Pt doping in the Ni matrix can accelerate the Volmer step on the Ni-Pt surface. Moreover, Ni-Pt(SAs) displays a more favorable kinetics for H2 formation reaction at high current density than Ni-Pt(NPs). Theoretical calculations reveal that atomically dispersed Pt weakens the adsorption of both H and OH on the surface of Ni-Pt electrode and promotes H2 formation from surface H on Ni-Pt(SAs).

Optimizing the Spatial Density of Single Co Sites via Molecular Spacing for Facilitating Sustainable Water Oxidation

Advances in single-atom (-site) catalysts (SACs) provide a new solution of atomic economy and accuracy for designing efficient electrocatalysts. In addition to a precise local coordination environment, controllable spatial active structure and tolerance under harsh operating conditions remain great challenges in the development of SACs. Here, we show a series of molecule-spaced SACs (msSACs) using different acid anhydrides to regulate the spatial density of discrete metal phthalocyanines with single Co sites, which significantly improve the effective active-site numbers and mass transfer, enabling one of the msSACs connected by pyromellitic dianhydride to exhibit an outstanding mass activity of (1.63 ± 0.01) × 105 A·g-1 and TOFbulk of 27.66 ± 1.59 s-1 at 1.58 V (vs RHE) and long-term durability at an ultrahigh current density of 2.0 A·cm-2 under industrial conditions for oxygen evolution reaction. This study demonstrates that the accessible spatial density of single atom sites can be another important parameter to enhance the overall performance of catalysts.

Palladium Single-Atom (In)Stability Under Aqueous Reductive Conditions

Here, we investigate the stability and performance of single-atom Pd on TiO2 for the selective dechlorination of 4-chlorophenol. A challenge inherent to single atoms is their high surface free energy, which results in a tendency for the surface migration and aggregation of metal atoms. This work evaluates various factors affecting the stability of Pd single-atoms, including atomic dispersion, coordination environment, and substrate properties, under reductive aqueous conditions. The transition from single atoms to clusters vastly enhanced dechlorination kinetics without diminishing carbon-chlorine bond selectivity. X-ray absorption spectroscopy analysis using both in situ and ex situ conditions followed the dynamic transformation of single atoms into amorphous clusters, which consist of a unique unsaturated coordination environment and few nanometer diameter. The intricate relationship between stability and performance underscores the vital role of detailed characterization to properly determine the true active species for dehalogenation reactions.

How Pt Influences H2 Reactions on High Surface-Area Pt/CeO2 Powder Catalyst Surfaces

The addition of platinum-group metals (PGMs, e.g., Pt) to CeO2 is used in heterogeneous catalysis to promote the rate of redox surface reactions. Well-defined model system studies have shown that PGMs facilitate H2 dissociation, H-spillover onto CeO2 surfaces, and CeO2 surface reduction. However, it remains unclear how the heterogeneous structures and interfaces that exist on powder catalysts influence the mechanistic picture of PGM-promoted H2 reactions on CeO2 surfaces developed from model system studies. Here, controlled catalyst synthesis, temperature-programmed reduction (TPR), in situ infrared spectroscopy (IR), and in situ electron energy loss spectroscopy (EELS) were used to interrogate the mechanisms of how Pt nanoclusters and single atoms influence H2 reactions on high-surface area Pt/CeO2 powder catalysts. TPR showed that Pt promotes H2 consumption rates on Pt/CeO2 even when Pt exists on a small fraction of CeO2 particles, suggesting that H-spillover proceeds far from Pt-CeO2 interfaces and across CeO2-CeO2 particle interfaces. IR and EELS measurements provided evidence that Pt changes the mechanism of H2 activation and the rate limiting step for Ce3+, oxygen vacancy, and water formation as compared to pure CeO2. As a result, higher-saturation surface hydroxyl coverages can be achieved on Pt/CeO2 compared to pure CeO2. Further, Ce3+ formed by spillover-H from Pt is heterogeneously distributed and localized at and around interparticle CeO2-CeO2 boundaries, while activated H2 on pure CeO2 results in homogeneously distributed Ce3+. Ce3+ localization at and around CeO2-CeO2 boundaries for Pt/CeO2 is accompanied by surface reconstruction that enables faster rates of H2 consumption. This study reconciles the materials gap between model structures and powder catalysts for H2 reactions with Pt/CeO2 and highlights how the spatial heterogeneity of powder catalysts dictates the influence of Pt on H2 reactions at CeO2 surfaces.

Reactive Deposition Versus Strong Electrostatic Adsorption (SEA): A Key to Highly Active Single Atom Co-Catalysts in Photocatalytic H2 Generation

In recent years, the use of single atoms (SAs) has become of a rapidly increasing significance in photocatalytic H2 generation; here SA noble metals (mainly Pt SAs) can act as highly effective co-catalysts. The classic strategy to decorate oxide semiconductor surfaces with maximally dispersed SAs relies on "strong electrostatic adsorption" (SEA) of suitable noble metal complexes. In the case of TiO2 - the classic benchmark photocatalyst - SEA calls for adsorption of cationic Pt complexes such as [(NH3 )4 Pt]2+ which then are thermally reacted to surface-bound SAs. While SEA is widely used in literature, in the present work it is shown by a direct comparison that reactive attachment based on the reductive anchoring of SAs, e.g., from hexachloroplatinic(IV) acid (H2 PtCl6 ) leads directly to SAs in a configuration with a significantly higher specific activity than SAs deposited with SEA - and this at a significantly lower Pt loading and without any thermal post-deposition treatments. Overall, the work demonstrates that the reactive deposition strategy is superior to the classic SEA concept as it provides a direct electronically well-connected SA-anchoring and thus leads to highly active single-atom sites in photocatalysis.

Size of cerium dioxide support nanocrystals dictates reactivity of highly dispersed palladium catalysts

The catalytic performance of heterogeneous catalysts can be tuned by modulation of the size and structure of supported transition metals, which are typically regarded as the active sites. In single-atom metal catalysts, the support itself can strongly affect the catalytic properties. Here, we demonstrate that the size of cerium dioxide (CeO₂) support governs the reactivity of atomically dispersed palladium (Pd) in carbon monoxide (CO) oxidation. Catalysts with small CeO₂ nanocrystals (~4 nanometers) exhibit unusually high activity in a CO-rich reaction feed, whereas catalysts with medium-size CeO₂ (~8 nanometers) are preferred for lean conditions. Detailed spectroscopic investigations reveal support size-dependent redox properties of the Pd-CeO₂ interface.