Bimetallic metal-organic frameworks (BMOFs) for dye removal: a review

Safe drinking water and a clean living environment are essential for good health. However, the extensive and growing use of hazardous chemicals, particularly carcinogenic dyes like methylene blue, methyl orange, rhodamine B, and malachite green, in both domestic and industrial settings, has led to a scarcity of potable water and environmental challenges. This trend poses a serious threat to human society, sustainable global development, and marine ecosystems. Consequently, researchers are exploring more advanced methods beyond traditional wastewater treatment to address the removal or degradation of these toxic dyes. Conventional approaches are often inadequate for effectively removing dyes from industrial wastewater. In this study, we investigated bimetallic metal-organic frameworks (BMOFs) as a solution to these limitations. BMOFs demonstrated outstanding dye removal and degradation capabilities due to their multifunctionality, water stability, large surface area, adjustable pore size, and recyclability. This review provides a comprehensive overview of research on dye removal from wastewater using BMOFs, including their synthesis methods, types of dyes, and processes involved in dye removal, such as degradation and adsorption. Finally, the review discusses the future potential and emerging opportunities for BMOFs in sustainable water treatment.

Modified Ce/Zr-MOF Nanoparticles Loaded with Curcumin for Alzheimer's Disease via Multifunctional Modulation

Introduction

Alzheimer's disease (AD), a neurodegenerative condition, stands as the most prevalent form of dementia. Its complex pathological mechanisms and the formidable blood-brain barrier (BBB) pose significant challenges to current treatment approaches. Oxidative stress is recognized as a central factor in AD, underscoring the importance of antioxidative strategies in its treatment. In this study, we developed a novel brain-targeted nanoparticle, Ce/Zr-MOF@Cur-Lf, for AD therapy.

Methods

Layer-by-layer self-assembly technology was used to prepare Ce/Zr-MOF@Cur-Lf. In addition, the effect on the intracellular reactive oxygen species level, the uptake effect by PC12 and bEnd.3 cells and the in vitro BBB permeation effect were investigated. Finally, the mouse AD model was established by intrahippocampal injection of Aβ1-42, and the in vivo biodistribution, AD therapeutic effect and biosafety of the nanoparticles were researched at the animal level.

Results

As anticipated, Ce/Zr-MOF@Cur-Lf demonstrated efficient BBB penetration and uptake by PC12 cells, leading to attenuation of H2O2-induced oxidative damage. Moreover, intravenous administration of Ce/Zr-MOF@Cur-Lf resulted in rapid brain access and improvement of various pathological features of AD, including neuronal damage, amyloid-β deposition, dysregulated central cholinergic system, oxidative stress, and neuroinflammation.

Conclusion

Overall, Ce/Zr-MOF@Cur-Lf represents a promising approach for precise brain targeting and multi-target mechanisms in AD therapy, potentially serving as a viable option for future clinical treatment.

Cerium-Organic Framework UiO-66(Ce) as a Support for Nanoparticulate Gold for Use in Oxidation Catalysis

An optimised synthesis of the metal-organic framework (MOF) UiO-66(Ce) is reported using a modulator-free route, yielding ~5 g of material with high crystallinity and 22 % ligand defect. Two methods are developed for loading gold nanoparticles onto the MOF. The first uses a double-solvent method to introduce HAuCl4 onto UiO-66(Ce), followed by reduction under 5 % H2 in N2, while the second is a novel one-pot method where HAuCl4 is added to the synthesis mixture, forming Au nanoparticles within the pores of the UiO-66(Ce) during crystallisation. Analysis using powder X-ray diffraction (PXRD), nitrogen adsorption isotherms, transmission electron microscopy and small-angle X-ray scattering (SAXS) reveals that the two-step double-solvent method yields gold crystallites on the external surface of the MOF particles that are visible by PXRD. In contrast, the one-pot method forms smaller gold crystallites, with a distribution of sizes centred on ~4 nm diameter as seen by SAXS, with evidence from PXRD for the smallest particles being present within the MOF structure. The Au-loaded UiO-66(Ce) materials are evaluated for the catalytic oxidation of vanillyl alcohol to vanillin at 60 °C. Our findings indicate that incorporating Au nanoparticles via the one-pot synthesis method, enhances redox activity, achieving 43 % conversion and 90 % selectivity towards vanillin.

The Key to MOF Membrane Fabrication and Application: the Trade-off between Crystallization and Film Formation

Metal-organic frameworks (MOFs), owing the merits of ordered and tailored channel structures in the burgeoning crystalline porous materials, have demonstrated significant promise in construction of high-performance separation membranes. However, precisely because this crystal structure with strong molecular interaction in their lattice provides robust structural integrity and resistance to chemical and thermal degradation, crystalline MOFs typically exhibit insolubility, infusibility, stiffness and brittleness, and therefore their membrane-processing properties are far inferior to the flexible amorphous polymers and hinder their subsequent storage, transportation, and utilization. Hence, focusing on film-formation and crystallization is the foundation for exploring the fabrication and application of MOF membranes. In this review, the film-forming properties of crystalline MOFs are fundamentally analyzed from their inherent characteristics and compared with those of amorphous polymers, influencing factors of polycrystalline MOF membrane formation are summarized, the trade-off relationship between crystallization and membrane formation is discussed, and the strategy solving the film formation of crystalline MOFs in recent years are systematically reviewed, in anticipation of realizing the goal of preparing crystalline membranes with optimized processability and excellent performance.

Synthesis, Structure and (Photo)Catalytic Behavior of Ce-MOFs Containing Perfluoroalkylcarboxylate Linkers: Experimental and Theoretical Insights

Cerium-based Metal-Organic frameworks (Ce-MOFs) are attracting increasing interest due to their similar structural features to zirconium MOFs. The redox behavior of Ce(III/IV) adds a range of properties to the compounds. Recently, perfluorinated linkers have been used in the synthesis of MOFs to introduce new characteristic into the structure. We report the synthesis and structural characterization of Ce(IV)-based MOFs constructed using two perfluorinated alkyl linkers. Their structure, based on hexanuclear Ce6O4(OH)4 12+ clusters linked to each other by the dicarboxylate ions, has been solved ab-initio from X-ray powder diffraction data and refined by the Rietveld method. The crystallization kinetics and the MOF formation mechanism was also invesitigated by Synchrotron radiation with XAS spectroscopies (EXAFS and XANES). The MOFs present the same fcu cubic topology as observed in MOF-801 and UiO-66, and they showed good stability in water at different pH conditions. The electronic structure of these MOFs has been studied by DFT calculations in order to obtain insights into the density of states structure of the reported compounds, resulting in band gaps in the range of 2.8-3.1 eV. Their catalytic properties were tested both thermally and under visible light irradiation for the degradation of methyl orange (MO) dye.

Dual-Track Multifunctional Bimetallic Metal-Organic Frameworks for Antibiotic Enrichment and Detection

The improper use and overuse of antibiotics have led to significant burdens and detrimental effects on the environment, food supply, and human health. Herein, a magnetic solid-phase extraction program and an optical immunosensor based on bimetallic Ce/Zr-UiO 66 for the detection of antibiotics are developed. A magnetic Fe3O4@SiO2@Ce/Zr-UiO 66 metal-organic framework (MOF) is prepared to extract and enrich chloramphenicol from fish, wastewater, and urine samples, and a horseradish peroxidase (HRP)-Ce/Zr-UiO 66@bovine serum protein-chloramphenicol probe is used for the sensitive detection of chloramphenicol based on the dual-effect catalysis of Ce and HRP. In this manner, the application of Ce/Zr-UiO 66 in integrating sample pretreatment and antibiotic detection is systematically investigated and the associated mechanisms are explored. It is concluded that Ce/Zr-UiO 66 is a versatile dual-track material exhibiting high enrichment efficiency (6.37 mg g-1) and high sensitivity (limit of detection of 51.3 pg mL-1) for chloramphenicol detection and serving as a multifunctional MOF for safeguarding public health and hygiene.

Bimetallic CPM-37(Ni,Fe) metal-organic framework: enhanced porosity, stability and tunable composition

A newly synthesized series of bimetallic CPM-37(Ni,Fe) metal-organic frameworks with different iron content (Ni/Fe ≈ 2, 1, 0.5, named CPM-37(Ni2Fe), CPM-37(NiFe) and CPM-37(NiFe2)) demonstrated high N2-based specific SBET surface areas of 2039, 1955, and 2378 m2 g-1 for CPM-37(Ni2Fe), CPM-37(NiFe), and CPM-37(NiFe2), having much higher values compared to the monometallic CPM-37(Ni) and CPM-37(Fe) with 87 and 368 m2 g-1 only. It is rationalized that the mixed-metal nature of the materials increases the structural robustness due to the better charge balance at the coordination bonded cluster, which opens interesting application-oriented possibilities for mixed-metal CPM-37 and other less-stable MOFs. In this work, the CPM-37-derived α,β-Ni(OH)2, γ-NiO(OH), and, plausibly, γ-FeO(OH) phases obtained via decomposition in the alkaline medium demonstrated a potent electrocatalytic activity in the oxygen evolution reaction (OER). The ratio Ni : Fe ≈ 2 from CPM-37(Ni2Fe) showed the best OER activity with a small overpotential of 290 mV at 50 mA cm-2, low Tafel slope of 39 mV dec-1, and more stable OER performance compared to RuO2 after 20 h chronopotentiometry at 50 mA cm-2.

Green, Safe, and Reliable Synthesis of Bimetallic MOF-808 Nanozymes With Enhanced Aqueous Stability and Reactivity for Biological Applications

Bimetallic metal-organic frameworks (MOFs) are promising nanomaterials whose reactivity towards biomolecules remains challenging due to issues related to synthesis, stability, control over metal oxidation state, phase purity, and atomic level characterization. Here, these shortcomings are rationally addressed through development of a synthesis of mixed metal Zr/Ce-MOFs in aqueous environment, overcoming significant hurdles in the development of MOF nanozymes, sufficiently stable on biologically relevant conditions. Specifically, a green and safe synthesis of Zr/Ce-MOF-808 is reported in water/acetic acid mixture which affords remarkably water-stable materials with reliable nanozymatic reactivity, including MOFs with a high Ce content previously reported to be unstable in water. The new materials outperform analogous bimetallic MOF nanozymes, showcasing that rational synthesis modifications could impart outstanding improvements. Further, atomic-level characterization by X-ray Absorption Fine Structure (XAFS) and X-ray Diffraction (XRD) confirmed superior nanozymes arise from differences in the synthetic method, which results in aqueous stable materials, and Ce incorporation, which perturbs the ligand exchange dynamics of the material, and could ultimately be used to fine tune the intrinsic MOF reactivity. Similar rational strategies which leverage metals in a synergistic manner should enable other water-stable bimetallic MOF nanozymes able to surpass existing ones, laying the path for varied biotechnological applications.

Yolk-Shell and Hollow Zr/Ce-UiO-66 for Manipulating Selectivity in Tandem Reactions and Photoreactions

One of the hallmarks of multicomponent metal-organic frameworks (MOFs) is to finely tune their active centers to achieve product selectivity. In particular, obtaining bimetallic MOF hollow structures with precisely tailored redox centers under the same topology is still challenging despite a recent surge of such efforts. Herein, we present an engineering strategy named "cluster labilization" to generate hierarchically porous MOF composites with hollow structures and tunable active centers. By partially replacing zirconium with cerium in the hexanuclear clusters of UiO-66, unevenly distributed yolk-shell structures (YSS) were formed. Through acid treatment or annealing of the YSS precursor, single-shell hollow structures (SSHS) or double-shell hollow structures (DSHS) can be obtained, respectively. The active centers in SSHS and DSHS differ in their species, valence, and spatial locations. More importantly, YSS, SSHS, and DSHS with distinct active centers and microenvironments exhibit tunable catalytic activity, reversed selectivity, and high stability in the tandem reaction and the photoreaction.

Facile fabrication of Fe/Zr binary MOFs for arsenic removal in water: High capacity, fast kinetics and good reusability

A water-stable bimetallic Fe/Zr metal-organic framework [UiO-66(Fe/Zr)] for exceptional decontamination of arsenic in water was fabricated through a facile one-step strategy. The batch adsorption experiments revealed the excellent performances with ultrafast adsorption kinetics due to the synergistic effects of two functional centers and large surface area (498.33 m²/g). The absorption capacity of UiO-66(Fe/Zr) for arsenate [As(V)] and arsenite [As(III)] reached as high as 204.1 mg/g and 101.7 mg/g, respectively. Langmuir model was suitable to describe the adsorption behaviors of arsenic on UiO-66(Fe/Zr). The fast kinetics (adsorption equilibrium in 30 min, 10 mg/L As) and pseudo-second-order model implied the strong chemisorption between arsenic ions and UiO-66(Fe/Zr), which was further confirmed by DFT theoretical calculations. The results of FT-IR, XPS analysis and TCLP test demonstrated that arsenic was immobilized on the surface of UiO-66(Fe/Zr) through Fe/Zr-O-As bonds, and the leaching rates of the adsorbed As(III) and As(V) from the spent adsorbent were only 5.6% and 1.4%, respectively. UiO-66(Fe/Zr) can be regenerated for five cycles without obvious removal efficiency decrease. The original arsenic (1.0 mg/L) in lake and tap water was effectively removed in 2.0 hr [99.0% of As(III) and 99.8% of As(V)]. The bimetallic UiO-66(Fe/Zr) has great potentials in water deep purification of arsenic with fast kinetics and high capacity.

A Strategy to Enhance the Ferroelectric Behavior of MOF-802(Hf) via Doping Zr4+ Ions

MOF ferroelectrics, as a crucial member of molecular ferroelectrics, have shown intriguing advantages owing to the designability of structures and tunability of physicochemical properties, which make them an appealing group of ferroelectric materials. However, the weak ferroelectric property still is a huge challenge for further development. Here, a series of Zr-doped MOF-802(Hf)s were successfully synthesized through doping Zr⁴⁺ ions into the parent MOF-802(Hf) to improve ferroelectric properties. The well-shaped P-E hysteresis loops of Zr-doped MOF-802(Hf)s illustrate their ferroelectricity, and ferroelectric properties are effectively enhanced compared with the parent MOF-802(Hf). What's more, remanent polarization reaches 0.511 μC/cm² when the concentration of Zr⁴⁺ ions is 5%, which is 5 times higher than that of the parent MOF-802(Hf) and is on par with some perovskite ferroelectrics. The increased ferroelectric performance is attributed to the enhanced polarity of the whole structure triggered by lattice distortion when Hf⁴⁺ ions of the parent MOF-802(Hf) are substituted by Zr⁴⁺ ions. As far as we know, this is the first report on Hf-MOF exhibiting improved ferroelectric behaviors through doping metal ions into lattice nodes. This work demonstrates that introducing the second metal ions into lattice nodes of MOFs is an efficacious approach for exploiting MOF ferroelectrics with superior performance.

Inner transition metal-modulated metal organic frameworks (IT-MOFs) and their derived nanomaterials: a strategic approach towards stupendous photocatalysis

Photocatalysis, as an amenable and effective process, can be adopted for pollution remediation and to alleviate the ongoing energy crisis. In this case, recently, metal organic frameworks (MOFs) have attracted increasing attention in the field of photocatalysis owning to their unique characteristics including large specific surface area, tuneable pore architecture, mouldable framework composition, tuneable band structure, and exceptional photon absorption tendency complimented with superior anti-recombination of excitons. Among the plethora of frameworks, inner transition metal based-MOFs (IT-MOFs) have started to garner significant traction as photocatalysts due to their distinct characteristics compared to conventional transition metal-based frameworks. Typically, IT-MOFs have the tendency to generate high nuclearity clusters and possess abundant Lewis acidic sites, together with mixed valency, which aids in easily converting redox couples, thereby making them a suitable candidate for various photocatalytic reactions. Therefore, in this contribution, we aim to summarise the excellent photocatalytic performance of IT-MOFs and their composites accompanied by a thorough discussion of their topological changes with a variation in the structure of the metal cluster, fabrication routes, morphological features, and physico-chemical properties together with a brief discussion of computational findings. Moreover, we attempt to explore the scientific understanding of the functionalities of IT-MOFs and their composites with detailed mechanistic pathways for in-depth clarity towards photocatalysis. Furthermore, we present a comprehensive analysis of IT-MOFs for various crucial photocatalytic applications such as H₂/O₂ evolution, organic pollutant degradation, organic transformation, and N₂ and CO₂ reduction. In addition, we discuss the measures employed to enhance their performance with some future directions to address the challenges with IT-MOF-based nanomaterials.

Efficient Eu3+-Integrated UiO-66 Probe for Ratiometric Fluorescence Sensing of Styrene and Cyclohexanone

The development of probes with sensitive and prompt detection of volatile organic compounds (VOCs) is of great importance for protecting human health and public security. Herein, we successfully prepared a series of bimetallic lanthanide metal-organic framework (Eu/Zr-UiO-66) by incorporating Eu³⁺ for fluorescence sensing of VOCs (especially styrene and cyclohexanone) using a one-pot method. Based on the multiple fluorescence signal responses of Eu/Zr-UiO-66 toward styrene and cyclohexanone, a ratiometric fluorescence probe using (I₆₁₇/I₃₂₀) and (I₆₁₇/I₃₃₀) as output signals was developed to recognize styrene and cyclohexanone, respectively. Benefitting from the multiple fluorescence response, the limits of detection (LODs) of Eu/Zr-UiO-66 (1:9) for styrene and cyclohexanone were 1.5 and 2.5 ppm, respectively. These are among the lowest reported levels for MOF-based sensors, and this is the first known material for fluorescence sensing of cyclohexanone. Fluorescence quenching by styrene was mainly owing to the large electronegativity of styrene and fluorescence resonance energy transfer (FRET). However, FRET was accounted for fluorescence quenching by cyclohexanone. Moreover, Eu/Zr-UiO-66 (1:9) exhibited good anti-interference ability and recycling performance for styrene and cyclohexanone. More importantly, the visual recognition of styrene and EB vapor can be directly realized with the naked eyes using Eu/Zr-UiO-66 (1:9) test strips. This strategy provides a sensitive, selective, and reliable method for the visual sensing of styrene and cyclohexanone.

Zr- and Ti-based metal-organic frameworks: synthesis, structures and catalytic applications

Recently, Zr- and Ti-based metal-organic frameworks (MOFs) have gathered increasing interest in the field of chemistry and materials science, not only for their ordered porous structure, large surface area, and high thermal and chemical stability, but also for their various potential applications. Particularly, the unique features of Zr- and Ti-based MOFs enable them to be a highly versatile platform for catalysis. Although much effort has been devoted to developing Zr- and Ti-based MOF materials, they still suffer from difficulties in targeted synthesis, especially for Ti-based MOFs. In this Feature Article, we discuss the evolution of Zr- and Ti-based MOFs, giving a brief overview of their synthesis and structures. Furthermore, the catalytic uses of Zr- and Ti-based MOF materials in the previous 3-5 years have been highlighted. Finally, perspectives on the Zr- and Ti-based MOF materials are also proposed. This work provides in-depth insight into the advances in Zr- and Ti-based MOFs and boosts their catalytic applications.

MOF-Derived CeO2 and CeZrOx Solid Solutions: Exploring Ce Reduction through FTIR and NEXAFS Spectroscopy

The development of Ce-based materials is directly dependent on the catalyst surface defects, which is caused by the calcination steps required to increase structural stability. At the same time, the evaluation of cerium's redox properties under reaction conditions is of increasing relevant importance. The synthesis of Ce-UiO-66 and CeZr-UiO-66 and their subsequent calcination are presented here as a simple and inexpensive approach for achieving homogeneous and stable CeO₂ and CeZrO_x nanocrystals. The resulting materials constitute an ideal case study to thoroughly understand cerium redox properties. The Ce³⁺/Ce⁴⁺ redox properties are investigated by H₂-TPR experiments exploited by in situ FT-IR and Ce M₅-edge AP-NEXAFS spectroscopy. In the latter case, Ce³⁺ formation is quantified using the MCR-ALS protocol. FT-IR is then presented as a high potential/easily accessible technique for extracting valuable information about the cerium oxidation state under operating conditions. The dependence of the OH stretching vibration frequency on temperature and Ce reduction is described, providing a novel tool for qualitative monitoring of surface oxygen vacancy formation. Based on the reported results, the molecular absorption coefficient of the Ce³⁺ characteristic IR transition is tentatively evaluated, thus providing a basis for future Ce³⁺ quantification through FT-IR spectroscopy. Finally, the FT-IR limitations for Ce³⁺ quantification are discussed.

Metal-Organic Frameworks as Photocatalysts for Solar-Driven Overall Water Splitting

Metal-organic frameworks (MOFs) have been frequently used as photocatalysts for the hydrogen evolution reaction (HER) using sacrificial agents with UV-vis or visible light irradiation. The aim of the present review is to summarize the use of MOFs as solar-driven photocatalysts targeting to overcome the current efficiency limitations in overall water splitting (OWS). Initially, the fundamentals of the photocatalytic OWS under solar irradiation are presented. Then, the different strategies that can be implemented on MOFs to adapt them for solar photocatalysis for OWS are discussed in detail. Later, the most active MOFs reported until now for the solar-driven HER and/or oxygen evolution reaction (OER) are critically commented. These studies are taken as precedents for the discussion of the existing studies on the use of MOFs as photocatalysts for the OWS under visible or sunlight irradiation. The requirements to be met to use MOFs at large scale for the solar-driven OWS are also discussed. The last section of this review provides a summary of the current state of the field and comments on future prospects that could bring MOFs closer to commercial application.

Exploring novel heterojunctions based on the cerium metal-organic framework family and CAU-1, as dissimilar structures, for the sake of photocatalytic activity enhancement

Ce-based metal-organic frameworks (Ce-MOFs) are excellent photocatalysts due to their high efficiency in charge transportation. The integration of this family with CAU-1 (CAU standing for Christian-Albrechts-University), as a MOF benefiting from its ultra-high surface area, can remarkably enhance the properties of the structure. This research includes four new heterojunctions, namely CAU-1/Ce-BDC-NH2, CAU-1/Ce-UiO-66, CAU-1/Ce-MOF-808, and CAU-1/Ce-BDC, prepared by an innovative method, and several characterization techniques were employed to study the structural features of the frameworks. Their high surface area and low bandgap energy seemed appropriate for catalytic applications. Therefore, CAU-1/Ce-BDC was chosen for the photocatalytic removal of Cr(vi), a dangerous heavy metal, from aqueous systems. According to the results, a 96% reduction of Cr(vi) to Cr(iii) within 75 min was observed, and the catalyst retained its stability after four runs of reactions under acidic conditions.

Exceptional removal and immobilization of selenium species by bimetal-organic frameworks

Binary metallic organic frameworks can always play excellent functions for pollutants removal. One binary MOFs, UiO-66(Fe/Zr)), was newly synthesized and applied to remove aquatic selenite (SeIV) and selenate (SeVI). The adsorption behaviors and mechanisms were investigated using batch experiments, spectroscopic analyses, and theoretical calculations (DFT). The characterization results showed that the material inherited the topological structure of UiO-66 and excellent thermal stability. The large specific surface area (467.52 m²/g) and uniform mesoporous structures of the synthesized MOFs resulted in fast adsorption efficiency and high adsorption capacity for selenium species. The adsorbent kept high adsorption efficiency in a wide pH range from 2 to 11 with good anti-interference ability. The maximum adsorption capacity for Se(IV) and Se(VI) reached as high as 196 mg/g at pH 3 and 258 mg/g at pH 5, respectively. The process was conformed to fit pseudo-second-order kinetics and Langmuir isotherm, and could be explained by the formation of Fe/Zr-O-Se bond on the material surface, which was interpreted by the results of XPS, FTIR and DFT calculation. The regeneration and TCLP experiments demonstrated that UiO-66(Fe/Zr) could be regenerated for five cycles without obvious decrease of efficiencies, and the leaching rate of the adsorbed Se(IV) and Se(VI) in the spent adsorbent were only 4.8% and 2.3%. More than 99% of original Se(IV) and Se(VI) in the lake and tap water samples (1.0 mg/L of Se) could be removed in 2.0 h.

Photo-induced reversible nitric oxide capture by Fe-M(CO2H)4 (M = Co, Ni, Cu) as a building block of mixed-metal BTC-based MOFs

Metal-organic frameworks incorporating mixed-metal sites (MM-MOFs) have emerged as promising candidates in the development of sensing platforms for the detection of paramagnetic species. In this context, the present study explores the photo-induced switching behavior of mixed-metal Fe-M (M = Co, Ni, Cu) formate (Fe-M(CO₂H)₄), as an experimentally feasible strategy for the reversible capture of nitric oxide (NO). Using Fe-M(CO₂H)₄ as a building block of synthesized MOFs based on BTC (benzene-1,3,5-tricarboxylic acid), molecular simulations of NO adsorption on Fe-M(CO₂H)₄ were conducted to provide a template for evaluating the behavior of BTC-based MOFs towards NO. Accordingly, the relationship between the magnetic properties and adsorption behaviors of Fe-M(CO₂H)₄ towards NO gas molecules was evaluated before and after photoexcitation. We show that the photo-induced effect on the magnetic properties of Fe-M(CO₂H)₄ changes the interaction strength between NO and the Fe-M(CO₂H)₄ systems. NO chemisorption over Fe-Ni(CO₂H)₄ indicates that nickel-doped Fe-BTC MOFs can be efficiently applied for capturing purposes. Moreover, our calculations show a switching behavior between physisorption and chemisorption of the NO molecules over Fe-Co(CO₂H)₄, occurring through magnetic modulation under UV-Vis irradiation. As far as we know, this is the first study that proposes light-controlled reversible NO capture using MOFs. The present study provides a promising platform for reversible NO capture using MM-MOF-incorporated BTC building blocks.

Bimetallic Cd/Zr-UiO-66 material as a turn-on/off probe for As5+/Fe3+ in organic media

In this work, a series of bimetallic Cd/Zr-UiO-66 materials were successfully synthesized for fluorescence sensing toward traces of As⁵⁺ and Fe³⁺ via a one-pot method. Interestingly, the obtained bimetallic Cd/Zr-UiO-66 (1:9) can be served as turn-on probe for As⁵⁺ as well as turn-off probe for Fe³⁺. The LODs of Cd/Zr-UiO-66 (1:9) toward As⁵⁺ and Fe³⁺ were calculated to be 5.4 μM and 4.3 μM, respectively, indicating its effective sensing properties for As⁵⁺ and Fe³⁺ in methanol media. Moreover, even in the presence of other potentially interfering toxic metal ions such as As³⁺, Cd²⁺ and Pb²⁺, Cd/Zr-UiO-66 (1:9) still presented good anti-interference abilities. Additionally, the removal efficiency of Cd/Zr-UiO-66 (1:9) toward As⁵⁺ was higher than 70% when the initial As⁵⁺ was lower than 50 mg/L. The fluorescence quenching of Fe³⁺ were mainly due to the competitive absorption of excitation source and RET, while the ACE mechanism was mostly responsible for the enhancement of As⁵⁺. More importantly, this job might pave the way for future researches and applications on sensing As⁵⁺ and Fe³⁺.

Investigating the Influence of Hexanuclear Clusters in Isostructural Metal-Organic Frameworks on Toxic Gas Adsorption

The efficient capture of toxic gases, such as ammonia (NH₃) and sulfur dioxide (SO₂), can protect the general population and mitigate widespread air pollution. Metal-organic frameworks (MOFs) comprise a tunable class of adsorbents with high surface areas that can meet this challenge by selectively capturing these gases at low concentrations. In this work, we explored how modifying the metal ions in the node of an isostructural MOF series from a transition metal to a lanthanide or actinide influences the electronic environment of the node-based active site. Next, we investigated the adsorption properties of each MOF toward the relatively basic NH₃ and relatively acidic SO₂ gases. Within the NU-907 family of MOFs, we found that Zr₆-NU-907 exhibits the best uptake toward NH₃ at low pressures, while Th₆-NU-907 demonstrates the best low-pressure performance for SO₂ adsorption. Tracking the infrared (IR) stretching frequency of the node-based μ₃-OH groups provides insights into the electronegativity of the metal ion and suggests that the most electronegative metal ion (Zr) affords the node with the best NH₃ uptake at low pressures. In contrast, the Th₆ node contains additional coordinated water groups relative to the other M₆ nodes, which appears to yield the MOF with the greatest affinity for SO₂ uptake that occurs predominately through reversible physisorption interactions. Finally, in situ NH₃ IR spectroscopic studies indicate that both NH₄⁺ and Lewis-bound NH₃ species form during adsorption. Combined, these results suggest that tuning the electronic properties and structure of the node-based active site in an MOF presents a viable strategy to change the affinity of an MOF toward toxic gases.

Functionalized UiO-66(Ce) for photocatalytic organic transformation: the role of active sites modulated by ligand functionalization

The active sites in UiO-66(Ce) can be modulated by ligand functionalization, which plays an important role in photocatalytic organic transformation.

Highly sensitive colorimetric detection and effective adsorption of phosphate based on MOF-808(Zr/Ce)

MOF-808(Zr/Ce) has been successfully used for the sensitive and rapid detection of phosphate and phosphate removal by effective adsorption.

Fabrication of a novel heteroepitaxial structure from an MOF-on-MOF architecture as a photocatalyst for highly efficient Cr(vi) reduction

Ce-on-Zr-MOF-808, a novel MOF-on-MOF hybrid used for efficient chromium reduction under visible-light irradiation.

Porous organic-inorganic hybrid materials for catalysis, energy and environmental applications

Introduction of organic functionalities into the porous inorganic materials make the resulting hybrid porous framework not only more flexible and hydrophobic, but also provide additional scope for further functionalization, which...

Bimetallic Ordered Large-Pore MesoMOFs for Simultaneous Enrichment and Dephosphorylation of Phosphopeptides

Despite the fact that bimetallic metal-organic frameworks (MOFs) could afford multiple functionalities by a synergistic effect of individual metallic centers, their intrinsic microporous structure frequently restricts their wide applications with bulky molecules involved. An urgent need is consequently triggered to design bimetallic hierarchical mesoporous MOFs (mesoMOFs). Herein, Zr/Ce mesoMOFs with a uniform pore size of up to 8 nm was successfully synthesized by a copolymer template strategy with the aid of a Hoffmeister ion. The obtained Zr/Ce mesoMOFs feature high porosity, good chemical and thermal stabilities, and tunable element components, and up to 70% Zr could be incorporated into the mesoporous Ce-based framework without deteriorating its crystallinity. Thanks to the synergistic effect of inherent Ce and Zr as well as the large and open pore channels, a broad range of phosphopeptides with different molecule sizes could be effectively checked out, thanks to their simultaneous enrichment and dephosphorylation capabilities. Such an ability to efficiently concentrate phosphopeptides remained intact even in the presence of abundant non-phosphorylated species. The practical detection of phosphopeptides from human serum was also verified, prefiguring the great potentials of bimetallic large-pore mesoMOFs for the proteome applications.

Proton-Conductive Cerium-Based Metal-Organic Frameworks

In this study, proton-conducting behaviors of a cerium-based metal-organic framework (MOF), Ce-MOF-808, its zirconium-based isostructural MOF, and bimetallic MOFs with various Zr-to-Ce ratios are investigated. The significantly increased proton conductivity (σ) and decreased activation energy (E_a) are obtained by substituting Zr with Ce in the nodes of MOF-808. Ce-MOF-808 achieves a σ of 4.4 × 10^-3 S/cm at 25 °C under 99% relative humidity and an E_a of 0.14 eV; this value is among the lowest-reported E_a of proton-conductive MOFs. Density functional theory calculations are utilized to probe the proton affinities of these MOFs. As the first study reporting the proton conduction in cerium-based MOFs, the finding here suggests that cerium-based MOFs should be a better platform for the design of proton conductors compared to the commonly reported zirconium-based MOFs in future studies on energy-related applications.

Group 4 Metal-Based Metal—Organic Frameworks for Chemical Sensors

Metal-organic frameworks (MOFs) have attracted great attention for their applications in chemical sensors mainly due to their high porosity resulting in high density of spatially accessible active sites, which can interact with the aimed analyte. Among various MOFs, frameworks constructed from group 4 metal-based (e.g., zirconium, titanium, hafnium, and cerium) MOFs, have become especially of interest for the sensors requiring the operations in aqueous media owing to their remarkable chemical stability in water. Research efforts have been made to utilize these group 4 metal-based MOFs in chemosensors such as luminescent sensors, colorimetric sensors, electrochemical sensors, and resistive sensors for a range of analytes since 2013. Though several studies in this subfield have been published especially over the past 3–5 years, some challenges and concerns are still there and sometimes they might be overlooked. In this review, we aim to highlight the recent progress in the use of group 4 metal-based MOFs in chemical sensors, and focus on the challenges, potential concerns, and opportunities in future studies regarding the developments of such chemically robust MOFs for sensing applications.

Study of the Cycloaddition of CO2 with Styrene Oxide Over Six-Connected spn Topology MOFs (Zr, Hf) at Room Temperature

A series of MOFs with a 6-connected spn topology were synthesized (MOF-808-(Zr, Hf), PCN-777-(Zr, Hf), MOF-818-(Zr, Hf)). Through the in situ DRIFTS of NH₃ adsorption-desorption, we found that the activated catalyst mainly contains Lewis acid sites. The effects of different organic ligands on the Lewis acid of the Zr₆ cluster were analyzed by XPS and NH₃ -TPD, and the relative Lewis acidity of the same metal was obtained: PCN-777>MOF-808>MOF-818. In the Py-FTIR results, we confirmed that MOF-818 has a higher acid site density. In the activity test, MOFs with mesoporous structure showed better catalytic activity under normal temperature and pressure. Among them, MOF-818 can still maintain a high degree of crystallinity after catalysis. Finally, we use density functional theory to propose the mechanism of the cycloaddition reaction of carbon dioxide and styrene oxide. The results show that the metal is coordinated with styrene oxide and halogens attack the β carbon of the epoxide.

Effective enhancement of capacitive performance by the facile exfoliation of bulk metal-organic frameworks into 2D-functionalized nanosheets

Recently, much attention has been paid to two-dimensional MOF nanosheets (MONs) due to their widespread application in many specific areas. In this work, a simple and efficient congenerous-exfoliation strategy was developed to prepare vast and uniform few-layered Ni²⁺@Ce-MOF (Ce-MOF: {[Ce(HPIA)(PIA)(H₂O)₂]·H₂O}_n) nanosheets with a thickness of ca. 10 nm. In the exfoliation process, the synergistic action of Ni²⁺ and methanol solvents under ultrasonication plays a major role in restraining the interactions between the layers. Importantly, supercapacitor applications indicate that the exfoliated Ni²⁺@Ce-MOF nanosheet shows a remarkable improvement in the specific capacitance (921.05%) in comparison with that of the bulk Ce-MOF sample before modification.

Bandgap Modulation in Zr-Based Metal-Organic Frameworks by Mixed-Linker Approach

Metal-organic frameworks (MOFs) have been a promising material for many applications, e.g., photocatalysis, luminescence-based sensing, optoelectronics, and electrochemical devices, due to their tunable electronic properties through linker functionalization. In this work, we investigate the effect of mixed organic linkers on the bandgap modulation of polymorphic zirconium-based MOFs, UiO-66 and MIL-140A using density functional theory (DFT) calculations. We show that the electronic properties of both MOFs are in contrast to Vegard's law for semiconductors, that is, mixed-linker systems exhibit bandgaps not intermediate within the range of single-linker systems. Calculations of the total and partial density of states revealed the formation of mid-gap states in mixed-linker MOFs, causing the bandgap reduction. Interestingly, although both MOFs have similar composition, the effect is more significant in MIL-140A than in UiO-66. This is due to the presence of π-π stacking interactions in MIL-140A, which does not occur in UiO-66. The simulation results reveal a direct relationship between the strength of π-π interactions and the bandgap. This illustrates that distinct structural features, particularly the orientation of organic linkers can give rise to different consequences in bandgap modulation. Moreover, this computational work highlights the possibility to engineer the electronic properties of MOFs through a mixed-linker approach.

Cerium-Based Metal-Organic Framework Nanocrystals Interconnected by Carbon Nanotubes for Boosting Electrochemical Capacitor Performance

In this study, nanocrystals of a cerium-based metal-organic framework (Ce-MOF), Ce-MOF-808, are directly grown on the surface of carboxylic acid-functionalized carbon nanotubes (CNTs) by a facile one-step solvothermal synthesis method. Ce-MOF-CNT nanocomposites with various Ce-MOF-to-CNT ratios are synthesized, and their crystallinity, morphology, porosity, and electrical conductivity are examined. The redox-hopping and electrochemical behaviors of the pristine Ce-MOF in aqueous electrolytes are investigated, suggesting that the pristine Ce-MOF is electrochemically active but possesses a limited charge-transport behavior. As a demonstration, all the Ce-MOF, CNT, and nanocomposites are used as active materials for application in aqueous-based supercapacitors. The capacitive performance of the CNT can be significantly boosted with the help of redox-active Ce-MOF-808 nanocrystals.

Amorphous mesoporous matrix from metal-organic framework UiO-66 template with strong nucleophile substitution

The metal-organic framework (MOF) UiO-66 is made of zirconium clusters coordinated with 1,4-benzenedicarboxylate linkers that is stable in water and is highly tolerant to extremely acidic or basic environments. Conversely, the zirconium clusters are affine to nucleophiles so the crystalline structures of UiO-66 can be converted into amorphous derivatives. In a mineral acid solution both protons and coordinating nucleophile are present. This study for the first time revealed that it is the strong nucleophile instead of proton deteriorate the crystalline structures of UiO-66. Also, the so-produced amorphous mesoporous matrix, if not totally dissolved, can be applied as an efficient adsorbent. The noted adsorption capabilities of Cu(II) and nucleophiles by these amorphous mesoporous matrix did not correlate with the structural crystallinity or the internal surface area; conversely, the doped nucleophiles were noted to contribute to the adsorption tendencies towards Cu(II) and phosphate species via electrostatic interactions and hydrogen bonding, respectively. Conversion of sacrificing UiO-66 template to amorphous matrix can be applied as an effective way to fabricate specific adsorbent with resistance to extreme pH and strong nucleophile challenges.

A valuable strategy to improve ferroelectric performance significantly via metallic ion doping in the lattice nodes of metal-organic frameworks

Metal-organic frameworks (MOFs) with polar space groups in crystallography represent a class of potential molecular-based ferroelectrics; however, the rational design and enhancement of the performance of MOF-based ferroelectrics is a great challenge. In this work, a series of mixed-metal MOFs deriving from Mg2+ ions doped into the lattice nodes of the parent-MOF (Ni-MOF) are synthesized by an in situ solvothermal method. Taking advantage of Mg2+ ions doped in the Ni-MOF, the doped-MOFs (Mg/Ni-MOFs) appear to have a significant lattice distortion and noteworthy dipole asymmetry in the crystals. It is found that the obtained doped-MOFs show a significant enhancement of ferroelectricity compared with that of the parent-MOF. This study opens up a new landscape to explore possibilities for controlling ferroelectric performance in MOF-based ferroelectrics.

Zr-MOF-808 as Catalyst for Amide Esterification

In this work, zirconium-based metal-organic framework Zr-MOF-808-P has been found to be an efficient and versatile catalyst for amide esterification. Comparing with previously reported homogeneous and heterogeneous catalysts, Zr-MOF-808-P can promote the reaction for a wide range of primary, secondary and tertiary amides with n-butanol as nucleophilic agent. Different alcohols have been employed in amide esterification with quantitative yields. Moreover, the catalyst acts as a heterogeneous catalyst and could be reused for at least five consecutive cycles. The amide esterification mechanism has been studied on the Zr-MOF-808 at molecular level by in situ FTIR spectroscopic technique and kinetic study.

Voltamperometric Sensors and Biosensors Based on Carbon Nanomaterials Used for Detecting Caffeic Acid-A Review

Caffeic acid is one of the most important hydroxycinnamic acids found in various foods and plant products. It has multiple beneficial effects in the human body such as antioxidant, antibacterial, anti-inflammatory, and antineoplastic. Since overdoses of caffeic acid may have negative effects, the quality and quantity of this acid in foods, pharmaceuticals, food supplements, etc., needs to be accurately determined. The present paper analyzes the most representative scientific papers published mostly in the last 10 years which describe the development and characterization of voltamperometric sensors or biosensors based on carbon nanomaterials and/or enzyme commonly used for detecting caffeic acid and a series of methods which may improve the performance characteristics of such sensors.