Novel ratiometric fluorescent probe with large Stokes shift for selective sensing and imaging of Zn2+ in live cell

A novel ratiometric fluorescent probe, namely 5-[(3-dicyanoylidene -5.5-dimethyl) cyclohexenyl-1-ethenyl] salicylaldehyde-3'-hydroxybenzohydrazone (DCSH) is presented for the selective sensing of Zn2+ ion in acetonitrile/water (2/3, pH 7.4) solution. Introducing Zn2+ ions notably caused the peak emission of DCSH to shift from 560 nm to 646 nm, accompanied with a significant enhancement of its intensity. A vivid change in fluorescence color from yellow to red facilitated the immediate identification of Zn2+ ions by visual observation. DCSH exhibits substantial Stokes shifts (110 and 196 nm), rapid detection capability (within 10 s) and high sensitivity to Zn2+ ions, achieving a limit of detection of 31.2 nM. The response mechanism is supposed to involve the block of C = N bond isomerization and excited state intramolecular proton transfer (ESIPT) along with the enhancement of fluorescence through chelation (CHEF) effect. DCSH was effectively utilized for ratiometric fluorescence imaging to monitor exogenous Zn2+ concentrations in HeLa cells. Significantly, DCSH is capable of monitoring elevated levels of Zn2+ ion during apoptosis induced by L-Buthionine sulfoximine (BSO).

Fluorescent response mechanism based on ESIPT and TICT of novel probe H2QJI: A TD-DFT investigation

Recently, synthesized N-linked-disalicylaldehyde H2QJI probes have been used to detect heavy metal ions in the experiment conveniently. Nevertheless, there needs to be a more in-depth examination of the excited state intramolecular proton transfer (ESIPT) mechanism and photophysical properties of the probe. This work remedied it based on quantum chemistry calculations. We contained due hydrogen bond (O1-H2 ⋯ N3 and O4-H5 ⋯ O6) and then analyzed bond parameters, IR vibration spectra, and non-covalent interaction. The bond strength is enhanced under photoexcitation, and the former is significantly stronger. The calculated electron spectra are in agreement with the experimental values. The results of the S0 and S1 potential energy curves and IRC calculations also confirm the unique ESIPT behavior, which isan excited stated stepwise double proton transfer. The fluorescence, internal conversion, and intersystem crossing rate of KD molecules (twisted-, double proton transfer) were calculated respectively to reveal the radiative and non-radiative pathways. It proved that the corresponding spectra are not obtained since the electrons are mainly deactivated by the ISC (S1->T1). Furthermore, the interfragment charge transfer (IFCT) approach indicates that the molecule possesses twisted intramolecular charge transfer (TICT) characteristics, which lead to the quenching of fluorescence introduction.

Nitroxyl donating and visualization with a coumarin-based fluorescence probe

Nitroxyl (HNO), the single-electron reduction product of nitric oxide (NO), has attracted great interest in the treatment of congestive heart failure in clinical trials. In this paper, we describe the first coumarin-based compound N-hydroxy-2-oxo-2H-chromene-6-sulfonamide (CD1) as a dualfunctional HNO donor, which can release both an HNO signaling molecule and a fluorescent reporter. Under physiological conditions (pH 7.4 and 37 °C), the CD1 HNO donor can readily decompose with a half-life of ∼90 min. The corresponding stoichiometry HNO from the CD1 donor was confirmed using both Vitamin B12 and phosphine compound traps. In addition to HNO releasing, specifically, the degradation product 2-oxo-2H-chromene-6-sulfinate (CS1) was generated as a fluorescent marker during the decomposition. Therefore, the HNO amount released in situ can be accurately monitored through fluorescence generation. As compared to the CD1 donor, the fluorescence intensity increased by about 4.9-fold. The concentration limit of detection of HNO releasing was determined to be ∼0.13 μM according to the fluorescence generation of CS1 at physiological conditions. Moreover, the bioimaging of the CD1 donor was demonstrated in the cell culture of HeLa cells, where the intracellular fluorescence signals were observed, inferring the site of HNO release. Finally, we anticipate that this novel coumarin-based CD1 donor opens a new platform for exploring the biology of HNO.

Aggregation-induced emissive nanoarchitectures for luminescent solar concentrators

Aggregation-induced emission (AIE), the phenomenon by which selected luminophores undergo the enhancement of emission intensity upon aggregation, has demonstrated potential in materials and biomaterials science, and in particular in those branches for which spectral management in the solid state is of fundamental importance. Its development in the area of luminescent spectral conversion devices like luminescent solar concentrators (LSCs) is instead still in its infancy. This account aims at summarizing relevant contributions made in this field so far, with a special emphasis on the design of molecular and macromolecular architectures capable of extending their spectral breadth to the deep-red (DR) and the near-infrared (NIR) wavelengths. Because of the many prospective advantages characterizing these spectral regions in terms of photon flux density and human-eye perception, it is anticipated that further development in the design, synthesis and engineering of advanced molecular and macromolecular DR/NIR-active AIE luminophores will enable faster and easier integration of LSCs into the built environment as highly transparent, active elements for unobtrusive light-to-electricity conversion.

Design of C2-symmetric pseudopeptides for in vivo detection of Cu(II) through controlled supramolecular nano-assembly

Pseudopeptides are emerging next-generation soft bioinspired materials for biological applications. Therefore, a new class of C2-symmetric L-valine-derived pseudopeptides has been designed and developed. The newly developed pseudopeptides exhibit intracellular Cu(II) ion detection in live-cell fluorescence studies on RAW264.7 cells. We find that the changes in the amino acid side chain in desired pseudopeptidic moieties lead to a drastic change in their selectivity towards different metal ions. The L-valine-derived pseudopeptides exhibit selectivity towards Cu(II) ions through turn-off fluorescence, and the L-phenylalanine-derived pseudopeptides exhibit selectivity towards Zn(II) ions through turn-on fluorescence. In addition, the L-valine-derived pseudopeptides show an increase in spherical-shaped structures upon incubation with Cu(II) ions during supramolecular nano-assembly formation. In contrast, the L-phenylalanine-derived pseudopeptides show a decrease in spherical-shaped structures upon adding Zn(II) ions. The judiciously designed L-valine-derived and L-phenylalanine-derived bioinspired pseudopeptides are promising for exploring similar effects in various peptidomimetics in advanced biological applications.

Coordination Synergistic-Induced J-Aggregation Enhanced Fluorescent Performance of HBT-Excimers and Imaging Applications

Developing a novel strategy to improve the optical performances of fluorescent probes is a vital factor in elevating its practical application; viz., novel biocompatible fluorescent probes with excellent multifunctions exhibited unparalleled advantages in probing functions of intracellular molecules to elucidate intracellular events in living systems. Herein, we have successfully constructed a new strategy that aggregation and coordination synergistically induce (2-hydroxylphenyl-benzothiazole) HBT derivatives to form excimers with large red-shifted fluorescence and application for insight into stress-response zinc fluctuations in living systems. We have synthesized four HBT-based derivatives and deeply investigated the response mechanism by fluorescent spectral studies, demonstrating that probes 3 and 4 showcased large red shifts in emission wavelength due to J-aggregation. More interestingly, the fluorescence of probe 4 was significantly enhanced in the presence of a zinc ion, suggesting that zinc coordination synergistically induced J-aggregation. Probe 4 was successfully applied to image zinc fluctuations in different models of living systems, proving that this probe is a powerful tool to unveil the relationship between invasive stress and diseases by monitoring endogenous zinc fluctuations.

Geometrically twisted intra-inter-molecular cooperative interactions for an enhanced photo-response in an ORMOSIL-based host-guest system

In situ encapsulation of the 2-(2'-hydroxylphenyl)benzothiazole (HBT) fluorophore into organically modified silica (ORMOSIL) is recognized as a potential approach to increase the photocurrent conversion efficiency. Encapsulation resulted in a twisted geometrical configuration of HBT with an efficient charge transfer and increased carrier density, resulting in a 246% photo-response enhancement.

AIE paper shred for the detection of evolved amine vapor from putrefaction processes of fish

Seafood plays a major role in the human diet. During transportation, without proper storage and supply chain, its quality deteriorates easily. The post-harvesting processes such as the storage of food play a crucial role in human health. So it is highly imperative to have a technique for identifying food spoilage earlier to ensure the food safety and security of the consumers. Herein we have developed a highly selective and sensitive fluorescent 'Turn-on' probe 2-amino-5-nitrobenzo [d] thiazol-2-yl) imino)methylphenol ANT based on aggregation induced emission (AIE). ANT molecule possesses both restricted intramolecular rotation (RIR) and excited state intramolecular proton transfer (ESIPT) properties leading to fluorescent enhancement rather than aggregation caused quenching (ACQ). The probe shows high selectivity and sensitivity towards the NH3 vapor. This probe with the AIE property is employed for the real-time detection of NH3 in both aqueous and gaseous phases. ANT molecule is deposited on the paper shred by a physical method is utilized to monitor NH3 vapor from red snapper fish as a real-time sample during its degradation processes. After two days there is a ratiometric color change in the paper shred from yellow to orange for the fish stored at room temperature indicating its rotten and unpalatability nature. Paper shred is reused by immersing it into the tetrahydrofuran (THF), in which it retains its initial color due to deprotonation of NH3, keto to enol tautomerism discloses the reusability of the fluorescent probe. Studies carried out using UV-visible and fluorescence spectroscopy infer that the ANT probe has high affinity towards NH3 vapor.

Review on Synthesis of 2-(2-Hydroxyaryl) Benzothiazoles (HBT) for Excited-State Intra-molecular Proton Transfer (ESIPT)-Based Detection of Ions and Biomolecules

In this review, we present a systematic and comprehensive summary of the recent developments in the synthetic strategies of 2-(2-hydroxyarylsubstituted)-benzothiazole (HBT) framework along with incorporation of various substituents on phenolic and benzothiazole rings which affect the emission process. The literature, spanning the years 2015-2024, on excited-state intramolecular proton transfer (ESIPT)-based studies of HBT derivatives comprising the effects of solvent polarity, substituents, and extended conjugation on fluorophores has been searched. ESIPT, intramolecular charge transfer, and aggregation-induced emissions enable these fluorescent probes to specifically interact with analytes, thereby altering their luminescence characteristics to achieve analyte detection. These fluorescent probes exhibit large Stokes shifts, high quantum yields, and excellent color transitions. Finally, the applications of HBTs as ESIPT-based fluorescent probes for the detection of cations, anions, and biomolecules have been summarized. We anticipate that this review will provide a comprehensive overview of the current state of research in this field and encourage researchers to develop novel ESIPT-based fluorophores with new applications.

AI-Powered Mining of Highly Customized and Superior ESIPT-Based Fluorescent Probes

Excited-state intramolecular proton transfer (ESIPT) has attracted great attention in fluorescent sensors and luminescent materials due to its unique photobiological and photochemical features. However, the current structures are far from meeting the specific demands for ESIPT molecules in different scenarios; the try-and-error development method is labor-intensive and costly. Therefore, it is imperative to devise novel approaches for the exploration of promising ESIPT fluorophores. This research proposes an artificial intelligence approach aiming at exploring ESIPT molecules efficiently. The first high-quality ESIPT dataset and a multi-level prediction system are constructed that realized accurate identification of ESIPT molecules from a large number of compounds under a stepwise distinguishing from conventional molecules to fluorescent molecules and then to ESIPT molecules. Furthermore, key structural features that contributed to ESIPT are revealed by using the SHapley Additive exPlanations (SHAP) method. Then three strategies are proposed to ensure the ESIPT process while keeping good safety, pharmacokinetic properties, and novel structures. With these strategies, >700 previously unreported ESIPT molecules are screened from a large pool of 570 000 compounds. The ESIPT process and biosafety of optimal molecules are successfully validated by quantitative calculation and experiment. This novel approach is expected to bring a new paradigm for exploring ideal ESIPT molecules.

Switching of photoinduced proton transfer from one six-membered hydrogen-bonded ring to other: a molecule of hydrazine and pH sensor

The present study describes photophysical properties of 3-(benzo[d]oxazol-2-yl)-5-bromo-2-hydroxybenzaldehyde (HBOB) and (E)-2-(benzo[d]oxazol-2-yl)-4-bromo-6-(hydrazonomethyl)phenol (HBON) molecules with asymmetric two-way proton transfer sites. The purpose of this study is to know the direction of ESIPT out of the two-way proton transfer pathways in these molecules in both the solid and solution state. The steady state and time-resolved spectral behaviour of HBOB and HBON and a comparison of the spectral features with the two distinct control compounds 2-(benzo[d]oxazol-2-yl)-4-bromophenol (HBO) and (E)-4-bromo-2-(hydrazonomethyl)phenol (HBN) having single 6-membered hydrogen bonded network reveal that HBOB undergoes imine-amine photoisomerisation by proton transfer towards the oxazole side and HBON undergoes towards the hydrazone side with characteristic Stokes' shifted emission. Proton transfer forms with the red shifted emission of these molecules shows fast decay than the locally excited state. In the solid state, extremely high fluorescence intensity was observed, following a similar type of ESIPT pattern. Calculated ground (S0) and excited state (S1) energy barriers for the PT process obtained using density functional theory (DFT) and time-dependent density functional theory (TD-DFT) corroborate the unidirectional excited state intramolecular proton transfer (ESIPT) process for HBOB and HBON, and the theoretical spectral features validate our experimental absorption and emission spectra well. Interestingly, the unique unidirectional ESIPT behaviour of HBOB was utilised to detect hydrazine both in solution and solid phases. On the other hand, HBON was found to be a good fluorescence pH sensor with a ratiometric color change from yellow to green in acidic and basic media.

Isoindoline-based fluorogenic probes bearing a self-immolative linker for the sensitive and selective detection of O-GlcNAcase activity

O-GlcNAcase (OGA) is implicated in several important biological and disease-relevant processes. Here, we synthesized fluorogenic probes for OGA by grafting GlcNAc directly or using a self-immolative linker to the hydroxyl position of 4-hydroxylisoindoline (BHID), a typical excited-state intramolecular proton transfer (ESIPT) probe. The probe was used for a fluorogenic assay to determine the half maximal inhibitory concentration of a known OGA inhibitor and differentiate between OGA and hexosaminidase when GlcNAc is replaced by GlcNPr, where a propionyl group is used instead of an acetyl group.

Simple enzyme based fluorimetric biosensor for urea in human biofluids

As an important biomarker for renal related diseases, detection of urea is playing a vital role in human biofluids on clinical diagnosis concern. In this work, a synthetic salicyaldehyde based imine fluorophore was synthesized using sonication method and conjugated with urease which was used as fluorescent biosensor for the detection of urea in serum samples. This enzyme based biosensor has shown a good selectivity and sensitivity towards urea with the linear range from 2 to 80 mM and the detection limit of 73 µM. The sensing response obtain is highly agreeing with existing analytical technique for urea detection which strongly recommends this biosensor for clinical application.

Nitroquinolone Fused Salicyl and Naphthyl Hydrazone Fluorescent Probes for the Detection of Fe3+and Pb2+ Ions

The application of quinolones stretches over a large umbrella of medicinal field as well as chemosensor due to the presence of privileged heterocyclic aromatic rig system. Salicyl and Naphthyl Hydrazide motifs are also established fluorophore groups. Therefore in this work, we have designed and synthesized Salicyl hydrazide (3a-c) and naphthyl hydrazide fused nitroquinolones (5a-c) investigated for their fluorescent behaviour. Preliminary UV- absorption studies were carried out and the metal selectivity were examined with various metal ion. Among them, it was found that compound 3a was selective towards Fe3+ ions (λex = 330 nm, 1:1 DMF:H2O at pH = 7.4 in HEPES Buffer medium). 3a shows decrease emission intensity in presence of Fe3+ ions. Compound 5a shows enhancement in fluorescence intensity upon addition of Pb2+ ion (λex = 280 nm, 1:1 DMF:H2O at pH = 7.4 in HEPES Buffer medium). Further, the concentration dependence, competitive binding and EDTA reversibility were studied for selected compounds towards the respective cations selectivity. Jobs plot analysis indicate that 1:1 binding of 3a with Fe3+ ion (Ka = 3.17 x104M-1 and Limit Of Detection (LOD) = 5.1 × 10-7 M) whereas 5a showed 1:2 binding mode with Pb2+ ions (Ka = 2.14 × 106 M-1 and Limit Of Detection (LOD) = 2.613 × 10-9 M). Density Function Theoretical studies were performed as support for the experimental results.

Natural flavonols as probes for direct determination of borax: From conventional fluorescence analysis to paper-based smartphone sensing

Borax is strictly regulated in the food processing and pharmaceutical industry due to its physiological toxicity, and the development of a direct analytical method is essential for effectively monitoring the borax abuse. In this work, the fluorescence properties of flavonoids, including flavones, isoflavones and flavonols, were systematically investigated from aqueous to borax solutions, and it was found that the weak intrinsic fluorescence of flavonols could be pervasively sensitized by borax. A natural flavonol, morin, was subsequently chosen as a representative probe to develop a turn-on fluorescence sensing method for borax analysis, which achieved a linear response spanning four orders of magnitude with a detection limit of 1.07 μM (0.22 μg mL-1 in terms of Na2B4O7 content). Furthermore, a smartphone-assisted paper-based test device was designed and constructed by 3D printing technology. Using morin-impregnated test strips as the carrier, the borax could be visually detected by the RGB signals of the captured images, with a detection limit of 0.13 mM (27.05 μg mL-1 for Na2B4O7). Combining ion exchange treatment for food samples and sodium periodate oxidation for drug samples, the developed methods were successfully applied for the direct analysis of borax in various products with the recoveries of 86.9-106.3% for traditional fluorescence analysis and 82.7-108.8% for smartphone-assisted fluorescence sensing. The fluorescence property of the morin-borax system was studied using time-dependent density functional theory, and the sensing mechanism was discussed in conjunction with experimental research.

Molecular design and architectonics towards film-based fluorescent sensing

The past few decades have witnessed encouraging progress in the development of high-performance film-based fluorescent sensors (FFSs) for detecting explosives, illicit drugs, chemical warfare agents (CWAs), and hazardous volatile organic chemicals (VOCs), among others. Several FFSs have transitioned from laboratory research to real-world applications, demonstrating their practical relevance. At the heart of FFS technology lies the sensing films, which play a crucial role in determining the analytes and the resulting signals. The selection of sensing fluorophores and the fabrication strategies employed in film construction are key factors that influence the fluorescence properties, active-layer structures, and overall sensing behaviors of these films. This review examines the progress and innovations in the research field of FFSs over the past two decades, focusing on advancements in fluorophore design and active-layer structural engineering. It underscores popular sensing fluorophore scaffolds and the dynamics of excited state processes. Additionally, it delves into six distinct categories of film fabrication technologies and strategies, providing insights into their advantages and limitations. This review further addresses important considerations such as photostability and substrate effects. Concluding with an overview of the field's challenges and prospects, it sheds light on the potential for further development in this burgeoning area.

A New Fluorene-Based Fluorescent Probe for Recognition of Hypochlorite Ions and its Applications

Oxidative stress is a trigger for many diseases and occurs with the unstable hypochlorite (ClO-), known as one of the reactive oxygen species (ROS) in organisms. Then, HOCI is acknowledged as an oxidizing species that eliminates a variety of environmental pollutants. Hence, the development of novel methodologies for the selective and precise identification of HOCl/ ClO- is considered to be of utmost importance. In this study, the design, characterization, and applications of a fluorene-based fluorescent probe (FHBP) dependent on the ESIPT mechanism with a "turn-on" response for the sensitive/selective determination of ClO- against other competing samples were reported. The experimental results indicated that the detection limit for ClO-could be quantitatively determined by the probe to be 8.2 × 10-7 M. The binding constant of the probe FHBP with ClO- was computed as 9.75 × 103 M-1. In addition, the response time of FHBP was appointed to be 30 s, indicating a rapid reaction with ClO-. It has also been demonstrated that this probe can be successfully used for the detection of ClO- on filter papers, TLC sheets, cotton swabs, and real samples.

Modulation of excited state intramolecular proton transfer and intramolecular charge transfer pathways of symmetrical azines through micellar medium

The photophysical studies of fluorescent probes in micellar medium can give a better insight about their interaction with biological membranes. This study attempts to access the photophysical properties of the dual emitting azine based probe diethylamino salicylidene azine dimer (DEASAD) in micellar media. DEASAD showed dual charge transfer emission due to the presence of open enol (480 nm) and closed enol (510 nm) forms in polar protic solvents. Upon increasing the concentration of ionic surfactants, there is a significant increase in the emission intensity of both the enol forms of DEASAD until premicellar concentration. After micellization, occurrence of a new anomalous keto form emission through excited state intramolecular proton transfer (ESIPT) was observed around 530 nm in ionic micelles and its intensity changes depend on the micellar surface charge. The emission studies revealed the position and interaction of DEASAD with the charge of micellar stern layer as confirmed through interaction of metal ion with the probe and control molecules with and without ESIPT and ICT moieties. In contrast, the new anomalous longer wavelength keto form of DEASAD emission was absent in neutral micelles like Triton X-100.

Ultrafast excited state intramolecular proton transfer and isomerization of long-chain linked Schiff bases

The ultrafast proton transfer and the following dynamics for aromatic Schiff bases N,N'-bis(salicylidene)ethylenediamine (salen) and N,N'-bis(salicylidene)-1,4-butylenediamine (salbn) were investigated with experimental and theoretical methods. A dual emission property with a large Stokes shift in salen and salbn indicates that excited state intramolecular proton transfer occurs with photoexcitation. An efficient single proton transfer was confirmed within 200 fs for both molecules. Subsequently, a fast twisted motion of the keto moiety carries cis-keto to a relaxed stable geometry in the S1 state. Following the twisted motion, the phenol ring at keto moiety further rotates to a conical intersection with the ground state and a cis-trans isomerization occurs. The isomerization rate is high, which dominates the competition with the radiative transition, resulting in weak emission intensity. It is confirmed that the length of alkyl chain affects the direction of phenol ring twisting and rotation during the whole subsequent relaxation of excited cis-keto tautomer. Compared with polar solvent acetonitrile, the barrier of isomerization is higher and the hydrogen bond on keto moiety is stronger in nonpolar solvent toluene. It makes fluorescence radiation channels competing with isomerism more likely to occur, contributing to the observed difference of enol/keto emission ratios of salen and salbn in toluene and acetonitrile.

A novel ESIPT fluorescent probe for early detection and assessment of ferroptosis-mediated acute kidney injury via peroxynitrite fluctuation

BACKGROUND

Acute kidney injury (AKI) poses a severe risk to public health, mostly manifested by damage and death of renal tubular epithelial cells. However, routine blood examination, a conventional approach for clinical detection of AKI, is not available for identifying early-stage AKI. Plenty of reported methods were lack of early biomarkers and real time evaluation tools, which resulted in a vital challenge for early diagnosis of AKI. Therefore, developing novel probes for early detection and assessment of AKI is exceedingly crucial.

RESULTS

Based on ESIPT mechanism, a new fluorescent probe (MEO-NO) with 2-(2'-hydroxyphenyl) benzothiazole (HBT) derivatives as fluorophore has been synthesized for dynamic imaging peroxynitrite (ONOO-) levels in ferroptosis-mediated AKI. Upon the addition of ONOO-, MEO-NO exhibited obvious fluorescence changes, a significant Stokes shift (130 nm) and rapid response (approximately 45 s), and featured exceptional sensitivity (LOD = 7.28 nM) as well as high selectivity from the competitive species at physiological pH. In addition, MEO-NO was conducive to the biological depth imaging ONOO- in cells, zebrafish, and mice. Importantly, MEO-NO could monitor ONOO- levels during sorafenib-induced ferroptosis and CP-induced AKI. With the assistance of MEO-NO, we successfully visualized and tracked ONOO- variations for early detection and assessment of ferroptosis-mediated AKI in cells, zebrafish and mice models.

SIGNIFICANCE AND NOVELTY

Benefiting from the superior performance of MEO-NO, experimental results further demonstrated that the levels of ONOO- was overexpressed during ferroptosis-mediated AKI in cells, zebrafish, and mice models. The developed novel probe MEO-NO provided a strong visualization tool for imagining ONOO-, which might be a potential method for the prevention, diagnosis, and treatment of ferroptosis-mediated AKI.

2-Aryl-3H-1,3-Benzazaphosphole Oxides: Synthesis, Optical Properties, and Excited State Intramolecular Proton Transfer

Inclusion of a heteroatom to the phosphole ring is a promising strategy to intrinsically modulate the optical properties of phosphole derivatives. We report on a series of 2-aryl-3H-1,3-benzazaphosphole oxides that were efficiently prepared via sequential C-P cross-coupling, dehydrative [3+2] cycloaddition, and ring-oxidation reactions. The inclusion of one nitrogen atom into the benzophosphole framework caused red shifting of the absorption and emission maxima, reflecting the greater stabilization of the LUMO level. 2-(2-Hydroxyphenyl)benzazaphosphole oxide underwent excited state intramolecular proton transfer and emitted a weak fluorescence from the excited state of the N-H tautomer.

Anti-cancer drug axitinib: a unique tautomerism-induced dual-emissive probe for protein analysis

A commercial anti-cancer drug, axitinib, exhibits very stable dual emissions for discrimination of human serum albumin.

Design and Synthesis of ESIPT-Based Imidazole Derivatives for Cell Imaging

Excited-state intramolecular proton transfer (ESIPT)-based fluorescent molecules offer several exciting applications and are utilized most frequently as a cell imaging agent. Because of this, four distinct imidazole derivatives with ESIPT emission have been synthesized, and their fluorescence characteristics have been assessed in a variety of settings. Measurements using fluorescence spectroscopy have shown a promising candidate for cell staining, and potential candidate was specifically investigated for cell imaging uses in HT-29, MDA-MB-231, and HaCaT. Cytotoxicity of candidate molecule (1d) was analyzed using HT-29 and HaCaT cell lines, and at a dosage of 160 μM, HT-29 and HaCaT cell lines showed no signs of important cell toxicity. When spectroscopically measured, compound 1d showed no fluorescence ability in phosphate-buffered saline (PBS) solution. However, after 8 h of incubation in several cell lines, excellent fluorescence characteristics were seen in the green and red filters.

Imidazopyridine Family: Versatile and Promising Heterocyclic Skeletons for Different Applications

In recent years, there has been increasing attention focused on various products belonging to the imidazopyridine family; this class of heterocyclic compounds shows unique chemical structure, versatile optical properties, and diverse biological attributes. The broad family of imidazopyridines encompasses different heterocycles, each with its own specific properties and distinct characteristics, making all of them promising for various application fields. In general, this useful category of aromatic heterocycles holds significant promise across various research domains, spanning from material science to pharmaceuticals. The various cores belonging to the imidazopyridine family exhibit unique properties, such as serving as emitters in imaging, ligands for transition metals, showing reversible electrochemical properties, and demonstrating biological activity. Recently, numerous noteworthy advancements have emerged in different technological fields, including optoelectronic devices, sensors, energy conversion, medical applications, and shining emitters for imaging and microscopy. This review intends to provide a state-of-the-art overview of this framework from 1955 to the present day, unveiling different aspects of various applications. This extensive literature survey may guide chemists and researchers in the quest for novel imidazopyridine compounds with enhanced properties and efficiency in different uses.

Electronic Effect Driven Specific and Sensitive Recognition toward GHB

Precise detection of a trace substance that intrinsically possesses weak chemical activity and less-distinctive spatial structure is of great significance, but full of challenges, as it could not be effectively recognized via either an active covalent reaction process or multiple noncovalent interactions toward its simple structure. Here, the electronic-effect-driven recognition strategy was proposed to visually sense an illicit drug, γ-hydroxybutyric acid (GHB), which was treated as an analyte model due to its inherent simple structure. In particular, a sensing system composed of two probes substituted by the nitro (-NO2) and the hydrogen (-H), was constructed with the characteristic yellow coloring and blue fluorescence, as well as high sensitivity (0.586 ng/mL), fast response (0.2 s), and specific recognition, even in the presence of 22 interferents. In addition, a portable eyeshadow box-like sensing chip was fabricated and proven to be reliable and feasible in sensing GHB disguised in liquors for self-protection in a covert manner. Hence, this work developed an electronic-effect-driven modulation strategy of the recognition interaction between the probe and the analyte and, thus, would open up a new thought for detecting the analyte with weak activity and a simple structure, as well as propel the relevant application in real scenarios.

Advances in Organic Fluorescent Probes for Intracellular Zn2+ Detection and Bioimaging

Zinc ions (Zn2+) play a key role in maintaining and regulating protein structures and functions. To better understand the intracellular Zn2+ homeostasis and signaling role, various fluorescent sensors have been developed that allow the monitoring of Zn2+ concentrations and bioimaging in live cells in real time. This review highlights the recent development of organic fluorescent probes for the detection and imaging of intracellular Zn2+, including the design and construction of the probes, fluorescent response mechanisms, and their applications to intracellular Zn2+ detection and imaging on-site. Finally, the current challenges and prospects are discussed.

A Novel Fluorescence-Based Microplate Assay for High-Throughput Screening of hSULT1As Inhibitors

Human sulfotransferase 1As (hSULT1As) play a crucial role in the metabolic clearance and detoxification of a diverse range of endogenous and exogenous substances, as well as in the bioactivation of some procarcinogens and promutagens. Pharmacological inhibiting hSULT1As activities may enhance the in vivo effects of most hSULT1As drug substrates and offer protective strategies against the hSULT1As-mediated bioactivation of procarcinogens. To date, a fluorescence-based high-throughput assay for the efficient screening of hSULT1As inhibitors has not yet been reported. In this work, a fluorogenic substrate (HN-241) for hSULT1As was developed through scaffold-seeking and structure-guided molecular optimization. Under physiological conditions, HN-241 could be readily sulfated by hSULT1As to form HN-241 sulfate, which emitted brightly fluorescent signals around 450 nm. HN-241 was then used for establishing a novel fluorescence-based microplate assay, which strongly facilitated the high-throughput screening of hSULT1As inhibitors. Following the screening of an in-house natural product library, several polyphenolic compounds were identified with anti-hSULT1As activity, while pectolinarigenin and hinokiflavone were identified as potent inhibitors against three hSULT1A isozymes. Collectively, a novel fluorescence-based microplate assay was developed for the high-throughput screening and characterization of hSULT1As inhibitors, which offered an efficient and facile approach for identifying potent hSULT1As inhibitors from compound libraries.

Trimeric and Tetrameric Cationic Styryl Dyes as Novel Fluorescence and CD Probes for ds-DNA and ds-RNA

The wide use of mono- or bis-styryl fluorophores in biomedical applications prompted the presented design and study of a series of trimeric and tetrameric homo-analogues, styryl moieties arranged around a central aromatic core. The interactions with the most common biorelevant targets, ds-DNA and ds-RNA, were studied by a set of spectrophotometric methods (UV-VIS, fluorescence, circular dichroism, thermal denaturation). All studied dyes showed strong light absorption in the 350-420 nm range and strongly Stokes-shifted (+100-160 nm) emission with quantum yields (Φf) up to 0.57, whereby the mentioned properties were finely tuned by the type of the terminal cationic substituent and number of styryl components (tetramers being red-shifted in respect to trimers). All studied dyes strongly interacted with ds-DNA and ds-RNA with 1-10 nM-1 affinity, with dye emission being strongly quenched. The tetrameric analogues did not show any particular selectivity between ds-DNA or ds-RNA due to large size and consequent partial, non-selective insertion into DNA/RNA grooves. However, smaller trimeric styryl series showed size-dependent selective stabilization of ds-DNA vs. ds-RNA against thermal denaturation and highly selective or even specific recognition of several particular ds-DNA or ds-RNA structures by induced circular dichroism (ICD) bands. The chiral (ICD) selectivity was controlled by the size of a terminal cationic substituent. All dyes entered efficiently live human cells with negligible cytotoxic activity. Further prospects in the transfer of ICD-based selectivity into fluorescence-chiral methods (FDCD and CPL) is proposed, along with the development of new analogues with red-shifted absorbance properties.

Influence of Solvents and Halogenation on ESIPT of Benzimidazole Derivatives for Designing Turn-on Fluorescence Probes

This work reports a theoretical investigation of the solvent polarity as well as the halogenation of benzimidazole derivatives during excited state intramolecular proton transfer (ESIPT). It details how the environment and halogen substitution may contribute to the efficiency of ESIPT upon keto-enol tautomerism and exploits this effect to design fluorescence sensing. For this purpose, we first examine the conformational equilibrium of benzimidazole derivatives containing different halogen atoms, which results in intramolecular proton transfer, using density-functional theory (DFT) combined with the polarizable continuum model (PCM). Then we evaluate the fluorescence of the benzimidazole derivatives in different dielectric constants within time-dependent DFT (TD-DFT) approaches. Our results quantitatively allow the determination of large Stokes shifts in nonpolar solvents around 100 nm. These theoretical results are in agreement with experimental solvatochromism studies of benzimidazoles. The effect of halogenation, with fluorine, chlorine, and bromine, is less important than solvent polarization when ESIPT takes place. Thus, halogenation can be properly chosen depending on the interest of the synthesis of benzimidazole-based turn-on fluorescence in appropriate solvents.

Photoproperties of favipiravir and its 6-substituted analogues: fluorescence controlled through halogen substitution and tautomerism

Herein, we have showed the photophysical properties of favipiravir and its 6-substituted analogues. Also, we interpreted the origin of fluorescence of favipiravir and its 6-substituted analogues as a function of tautomerism modulation in ground and excited states. Favipiravir, the 6-fluorine derivative, showed the best photophysical profile, exhibiting a dominant emission wavelength of 430 nm, a high quantum yield (Q.Y.) of 1.0 and a long-lived state (10 ns). Its analogues also showed a maximum emission at 430 nm, but their Q.Y. values were 5-fold lower than that found for favipiravir, decreasing as a function of 6-substitution as follows: F > Cl > Br > I > H. Pyrazines bearing the least electronegative 6-substituent (X = Br, I, H) showed an extra lifetime, which was shorter (0.2-0.3 ns) and less abundant (>15%) than the main lifetime (10 ns, 85%). Further 2D excitation-emission matrix and solvent studies supported that these 3-hydroxy-2-pyrazinecarboxamides present two emissive states. The first of them (λem = 430 nm), which was the most abundant, most fluorescent and long-lived state, was characterized as "locally excited" (LE). Its fluorescence was favored with an increase of the hydrogen-donor nature of the solvent and for pyrazines having a high enolic characteristic. Thus, the high LE-fluorescence of these types of pyrazines depends on the keto-tautomerization of the ground state using a protic solvent and its feasible enol-tautomerization upon excitation. Finally, the second excited state (λem = 536 nm) was suggested as an excited-state intramolecular proton-transfer (ESIPT), and it was observed only, although discretely, for pyrazines bearing the least electronegative 6-substituent.

Experimental and theoretical comprehension of ESIPT fluorophores based on a 2-(2'-hydroxyphenyl)-3,3'-dimethylindole (HDMI) scaffold

Excited-State Intramolecular Proton Transfer (ESIPT) emission is associated with intense single or multiple fluorescence in the solid-state, along with enhanced photostability and sensitivity to the close environment. As a result, ESIPT probes are attractive candidates for ratiometric sensing of a variety of substrates. A new family of ESIPT fluorophores is described herein, inspired by the well-known 2-(2'hydroxyphenyl)benzazole (HBX) organic scaffold. The connection of 3,3'-dimethylindole (or 3H-indole) derivatives with phenol rings triggers the formation of novel 2-(2'-hydroxyphenyl)-3,3'-dimethylindole (HDMI) fluorophores, capable of stimuli-responsive ESIPT emission. This brand new family of dyes displays redshifted emission, as compared to HBX, along with an unprecedented acid/base-mediated stabilization of different rotamers, owing to supramolecular interactions with methyl groups. These compounds are therefore highly sensitive to external stimuli, such as the presence of acid or base, where protonated and deprotonated species have specific optical signatures. Moreover, a new pyridine-functionalized HDMI dye displays acid-sensitive AIE properties. The photophysical properties of all compounds have also been studied using ab initio calculations to support experiments in deciphering the nature of the various radiative transitions observed and the related excited rotameric species.

Small-Molecule Fluorescent Probes for Binding- and Activity-Based Sensing of Redox-Active Biological Metals

Although transition metals constitute less than 0.1% of the total mass within a human body, they have a substantial impact on fundamental biological processes across all kingdoms of life. Indeed, these nutrients play crucial roles in the physiological functions of enzymes, with the redox properties of many of these metals being essential to their activity. At the same time, imbalances in transition metal pools can be detrimental to health. Modern analytical techniques are helping to illuminate the workings of metal homeostasis at a molecular and atomic level, their spatial localization in real time, and the implications of metal dysregulation in disease pathogenesis. Fluorescence microscopy has proven to be one of the most promising non-invasive methods for studying metal pools in biological samples. The accuracy and sensitivity of bioimaging experiments are predominantly determined by the fluorescent metal-responsive sensor, highlighting the importance of rational probe design for such measurements. This review covers activity- and binding-based fluorescent metal sensors that have been applied to cellular studies. We focus on the essential redox-active metals: iron, copper, manganese, cobalt, chromium, and nickel. We aim to encourage further targeted efforts in developing innovative approaches to understanding the biological chemistry of redox-active metals.

Excited-state dynamics of 4-hydroxyisoindoline-1,3-dione and its derivative as fluorescent probes

Fluorescent probes have become promising tools for monitoring the concentration of peroxynitrite, which is linked to many diseases. However, despite focusing on developing numerous peroxynitrite based fluorescent probes, limited emphasis is placed on their sensing mechanism. Here, we investigated the sensing mechanism of a peroxynitrite fluorescent probe, named BHID-Bpin, with a focus on the relevant excited state dynamics. The photoexcited BHID-Bpin relaxes to its ground state via an efficient nonradiative process (∼300 ps) due to the presence of a minimum energy conical intersection between its first excited state and ground state. However, upon reacting with peroxynitrite, the Bpin moiety is cleaved from BHID-Bpin and BHID is formed. The formed BHID exhibits strong dual band fluorescence which is caused by an ultrafast excited-state intramolecular proton transfer process (∼1 ps).

Excitation wavelength-dependent lanthanide-disalicylaldehyde coordination hybrid capable of distinguishing D2O from H2O

The increasing demands in fields of anti-counterfeiting, fluorescence analysis, clinical therapy and LED illumination are urgently eager for more excellent optically switchable luminescent materials with the stable and multimodal fluorescence in single-component matrix. Herein, the lanthanide-disalicylaldehyde coordination hybrid H2Qj4/TbxEuy is proposed as an efficient luminescent matrix to connect terbium sensibilization with ESIPT (excited-state intramolecular proton transfer) effects, and three multi-emission hybrids are finally designed and synthesized by regulating Tb3+ and Eu3+ ratios. Surprisingly, the H2Qj4/Tb0.91Eu0.09 shows the excitation wavelength-dependent luminescence in solution which originates from two energy transfer ways of terbium sensibilization effect. It exhibits green and red lights under the 369 and 394 nm UV lamp, respectively. Three hybrids are further used as lab-on-a-molecule fluorescent probes to perform multianalyte detection for various solvents by selected fluorescent sensing channels. By means of PCA (principal component analysis) and HCA (hierarchical cluster analysis), all of them can successfully detect and discriminate17 common solvents, especially the H2O and D2O. Moreover, the H2Qj4/Tb0.91Eu0.09 also shows the wide linear responses of H2O content in D2O, discrimination of two-component solvent mixtures, hygroscopicity evaluation of D2O and information encryption which will advance the progress of multimodal luminescent materials and multianalyte chemosensors.

Electrophilicity Modulation for Sub-ppm Visualization and Discrimination of EDA

Precise and timely recognition of hazardous chemical substances is of great significance for safeguarding human health, ecological environment, public security, etc., especially crucial for adopting appropriate disposition measures. Up to now, there remains a practical challenge to sensitively detect and differentiate organic amines with similar chemical structures with intuitive analysis outcomes. Here, a unique optical probe with two electrophilic recognition sites for rapid and ultra-sensitive ratiometric fluorescence detection of ethylenediamine (EDA) is presented, while producing distinct fluorescence signals to its structural analog. The probe exhibits ppb/nmol level sensitivity to liquidous and gaseous EDA, specific recognition toward EDA without disturbance to up to 28 potential interferents, as well as rapid fluorescence response within 0.2 s. By further combining the portable sensing chip with the convolutional algorithm endowed with image processing, this work cracked the problem of precisely discriminating the target and non-targets at extremely low concentrations.

Investigating the Photophysical Aspects of a Naphthalene-Based Excited-State Proton Transfer Dye 1-(1H-Benzo[d]imidazol-2-yl)naphthalen-2-ol: pH-Dependent Modulation of Photodynamics

The steady state and time-resolved photophysical behavior of a proton transfer dye 1-(1H-benzo[d]imidazol-2-yl)naphthalen-2-ol (H-BINO) was investigated. The excited state intramolecular proton transfer (ESIPT) reaction in H-BINO is predominant in nonpolar solutions (toluene and DCM) with a lifetime of ∼1.0 ns. However, in polar media (DMF and MeOH), the excited state photodynamics is characterized by a complex equilibrium of emission from the locally excited state (0.1-2.3 ns), the phototautomer (0.5-1.2 ns), and the anionic emission (2.1-5.4 ns). In the solid state, emission from the various aggregated states dictates the photobehavior. Interestingly, the photodynamics in aqueous solution changes starkly as a function of pH with the anionic (2.1 ns) and phototautomeric (0.5-1.0 ns) emissions guiding the photodynamics as the pH of the medium increases. Optimized structural parameters at the proton donor and acceptor sites for the enol and keto forms and the calculated potential energy curve along the proton transfer coordinate at the density functional theory (DFT) level with the B3LYP/6-311G++(d,p) theory support a favorable and barrierless ESIPT process. The current results will surely boost the ongoing research on small molecule emissive materials.

Amination and Protonation Facilitated Novel Isoxazole Derivative for Highly Efficient Electron and Hole Separation

It is of great importance to understand the intrinsic relationship between phototautomerization and photoelectric properties for the exploration of novel organic materials. Here, in order to chemically control the protonation process, the aminated isoxazole derivative (2,2'-(isoxazolo[5,4-d]isoxazole-3,6-diyl)dibenzenaminium, DP-DA-DPIxz) with -N═ as the proton acceptor was designed to achieve the twisted intramolecular charge transfer (TICT) state which was triggered by an excited-state intramolecular proton transfer (ESIPT) process. This kind of protonation enhanced the intramolecular hydrogen bonding, conjugative effect, and steric hindrance effects, ensuring a barrierless spontaneous TICT process. Through the intramolecular proton transfer, the configuration torsion and conjugation dissociation of the DP-DA-DPIxz molecule was favored, which led to efficient charge separation and remarkable variations in light-emitting properties. We hope the present investigation will provide a new approach to design novel optoelectronic organic materials and shine light on the understanding of the charge transfer and separation process in molecular science.

Chemical bond reorganization in intramolecular proton transfer revealed by ultrafast X-ray photoelectron spectroscopy

Time-resolved X-ray photoelectron spectroscopy (TR-XPS) is used in a simulation study to monitor the excited state intramolecular proton transfer between oxygen and nitrogen atoms in 2-(iminomethyl)phenol. Real-time monitoring of the chemical bond breaking and forming processes is obtained through the time evolution of excited-state chemical shifts. By employing individual atomic probes of the proton donor and acceptor atoms, we predict distinct signals with opposite chemical shifts of the donor and acceptor groups during proton transfer. Details of the ultrafast bond breaking and forming dynamics are revealed by extending the classical electron spectroscopy chemical analysis to real time. Through a comparison with simulated time-resolved photoelectron spectroscopy at the valence level, the distinct advantage of TR-XPS is demonstrated thanks to its atom specificity.

Handedness-Inverted and Stimuli-Responsive Circularly Polarized Luminescent Nano/Micromaterials Through Pathway-Dependent Chiral Supramolecular Polymorphism

The precise manipulation of supramolecular polymorphs has been widely applied to control the morphologies and functions of self-assemblies, but is rarely utilized for the fabrication of circularly polarized luminescence (CPL) materials with tailored properties. Here, this work reports that an amphiphilic naphthalene-histidine compound (NIHis) readily self-assembled into distinct chiral nanostructures through pathway-dependent supramolecular polymorphism, which shows opposite and multistimuli responsive CPL signals. Specifically, NIHis display assembly-induced CPL from the polymorphic keto tautomer, which become predominant during enol-keto tautomerization shifting controlled by a bulk solvent effect. Interestingly, chiral polymorphs of nanofiber and microbelt with inverted CPL signals can be prepared from the same NIHis monomer in exactly the same solvent compositions and concentrations by only changing the temperature. The tunable CPL performance of the solid microbelts is realized under multi external physical or chemical stimuli including grinding, acid fuming, and heating. In particular, an emission color and CPL on-off switch based on the microbelt polymorph by reversible heating-cooling protocol is developed. This work brings a new approach for developing smart CPL materials via supramolecular polymorphism engineering.

A novel fluorescent probe based on carbazole-thiophene for the recognition of hypochlorite and its applications

A carbazole thiophene-aldehyde and 4-methylbenzenesulfonhydrazide conjugate CSH was synthesized by introducing 5-thiophene aldehyde at the 3-position of the carbazole group as the precursor and then condensing it with 4-methylbenzenesulfonhydrazide. CSH has high selectivity and sensitivity towards ClO-, which can specifically identify ClO- by UV-Vis and fluorescence spectroscopy. CSH can rapidly respond to ClO- in the physiological pH range through a fluorescence quenching pattern, accompanied by the color of CSH changing markedly from turquoise to yellowish green under the 365 nm UV light. Probe CSH exhibits a quantitative response to ClO- (0-11 μM) with a low detection limit (1.16 × 10-6 M). Cell imaging experiments have shown that CSH can capture fluorescent signals in the cyan and yellow channels of HeLa cells through fluorescence confocal microscopy, and can successfully identify exogenous ClO- in HeLa cells. In addition, probe CSH can also be used to detect ClO- in environmental water samples. These results indicate that CSH has potential application prospects in the environmental analysis and biological aspects.

A novel FA1-targeting fluorescent probe for specific discrimination and identification of human serum albumin from bovine serum albumin

A novel probe C1 combining benzothiazole with a spiropyran section was developed for the specific detection of human serum albumin (HSA). The molecular docking suggested that the sulphonic acid group modification allowed C1 to form specific hydrogen bonds with lysine (Lys137) at fatty acid site 1 (FA1) of HSA, thus enabling fluorescence differentiation between HSA and BSA.

A novel fluorescent probe for cascade detection of hydrogen sulfide and hypochlorous acid and its application in bioimaging

Herein we developed a cascade detection mode for the detection of HS- and ClO- by the novel probe NM-Cl bearing a conjugating naphthalene-dicyanoisophorone unit. The probe displayed sensitive and remarkable fluorescent enhancement in response to HS-, but not to other analytes. The mixture of probe and HS- constructed a specific sensing system for ClO- by fluorescent quenching response. The mechanism studies indicated that the successive reacting of HS- substitution Cl atom in probe and then addition of ClO- facilitation a thiofuran ring-forming induced differentiated fluorescence emission. This study provides a novel mechanism for the detection of HS- and ClO-, the imaging of cell and living animal further indicating the good application prospects of the probe in biosensing and bioimaging.

2D Conjugated Polymer Thin Films for Organic Electronics: Opportunities and Challenges

2D conjugated polymers (2DCPs) possess extended in-plane π-conjugated lattice and out-of-plane π-π stacking, which results in enhanced electronic performance and potentially unique band structures. These properties, along with predesignability, well-defined channels, easy postmodification, and order structure attract extensive attention from material science to organic electronics. In this review, the recent advance in the interfacial synthesis and conductivity tuning strategies of 2DCP thin films, as well as their application in organic electronics is summarized. Furthermore, it is shown that, by combining topology structure design and targeted conductivity adjustment, researchers have fabricated 2DCP thin films with predesigned active groups, highly ordered structures, and enhanced conductivity. These films exhibit great potential for various thin-film organic electronics, such as organic transistors, memristors, electrochromism, chemiresistors, and photodetectors. Finally, the future research directions and perspectives of 2DCPs are discussed in terms of the interfacial synthetic design and structure engineering for the fabrication of fully conjugated 2DCP thin films, as well as the functional manipulation of conductivity to advance their applications in future organic electronics.

Effect of external electric fields on the ESDPT process and photophysical properties of 1,8-dihydroxy-2-naphthaldehyde

In this work, by capitalizing on the density functional theory (DFT) and the time-dependent density functional theory (TD-DFT) methods, it has been systematically studied that the excited state double intramolecular proton transfer (ESDPT) process and the photophysical properties of 1,8-dihydroxy-2-naphthaldehyde (DHNA) are affected by the distinct external electric fields (EEFs). The obtained intramolecular hydrogen bond (IHB) parameters containing bond lengths and angles, as well as infrared (IR) vibrational spectra demonstrate that IHB strength changes in the distinct EEFs. Moreover, not only do the potential energy surfaces (PESs) indicate that the ESDPT process of DHNA is stepwise, but also increasing the positive EEF results in a decrease in the energy barrier accordingly, while vice versa. The absorption and fluorescence spectra also undergo a corresponding red or blue shift in the EEF; for instance, when the EEF changes from +10 × 10-4 a.u. to +20 × 10-4 a.u., the fluorescence peak undergoes a blue shift from 602 nm to 513 nm in the keto2 form. In a nutshell, the ESDPT process of DHNA can be influenced by the EEF, which will serve as a reference in regulating and controlling proton transfer that causes luminescence.

Excited-State Intramolecular Proton Transfer-Driven Photon-Gating for Photoelectrochemical Sensing of CO-Releasing Molecule-3

Different from prevalent approaches such as immunological recognition, complementary base pairing, or enzymatic regulation in current photoelectrochemical (PEC) sensing, this study reported an excited-state intramolecular proton transfer (ESIPT)-driven photon-gating PEC sensor. The sensor is developed for the detection of CO-releasing molecule-3 (CORM-3) by modifying an ESIPT-switched organic fluorescent probe molecule (NDAA) onto the surface of a p-type semiconductor (BiOI). The NDAA can be excited and exhibit strong green fluorescence after responding with CORM-3, resulting in an electrode-interface photon competitive absorption effect due to the switch on ESIPT and considerably reducing the photocurrent signal. The experimental results revealed that the as-developed PEC sensor achieved good analytical performance with high selectivity and sensitivity, with a linear range of 0.01-1000 μM and a lower detection limit of 6.5 nM. This work demonstrates the great potential of the organic fluorescent probe molecule family in advancing PEC analysis. It is anticipated that our findings will stimulate the creation of diverse functional probes possessing distinctive characteristics for inventive PEC sensors.

Novel Enzyme-Assisted Recycle Amplification Strategy for Tetracycline Detection Based on Oxidized Single-Walled Carbon Nanohorns

In this study, oxidized single-walled carbon nanohorns (oxSWCNHs) were prepared using nitric acid oxidation and subsequently combined with 3'6-carboxyfluorescein through charge transfer to prepare fluorescent probes. These oxSWCNHs were used to quench fluorogen signals at short distances and dissociate ssDNA using cryonase enzymes. We established a method for rapidly detecting tetracycline (TC) in complex samples based on the amplification of cryonase enzyme signals. After optimizing the experimental conditions, our method showed a detection limit of 5.05 ng/mL, with good specificity. This method was used to determine the TC content in complex samples, yielding a recovery rate of 90.0-103.3%. This result validated the efficacy of our method in detecting TC content within complex samples.

Photophysical Properties of (E)-1-(4-(Diethyla-mino)-2-hydroxybenzylidene)-4,4-dimethylthiosemicarbazide Compound and Its Triple Fluorescence Emission Mechanism: A Theoretical Perspective

In view of the application prospects in biomedicine of (E)-1-(4-(diethyla-mino)-2-hydroxybenzylidene)-4,4-dimethylthiosemicarbazide (DAHTS), the behavior of excited-state dynamics and photophysical properties were studied using the density functional theory/time-dependent density functional theory method. A series of studies indicated that the intramolecular hydrogen-bond (IHB) intensity of DAHTS was enhanced after photoexcitation. This was conducive to promoting the excited-state intramolecular proton-transfer (ESIPT) process. Combining the analysis of the IHB and hole-electron, it revealed that the molecule underwent both the ESIPT process and the twisted charge-transfer (TICT) process. Relying on exploration of the potential energy surface, it was proposed that the different competitive mechanisms between the ESIPT and TICT processes were regulated by solvent polarity. In acetonitrile (ACN) solvent, the ESIPT process occurred first, and the TICT process occurred later. In contrast, in the CYH solvent, the molecule first underwent the TICT process and then the ESIPT process. Furthermore, we raised the possibility that the TICT behavior was the cause of weak fluorescence emission for the DAHTS in CYH and ACN solvents. By the dimer correlation analysis, the corresponding components of triple fluorescence emission were clearly assigned, corresponding to the monomer, dimer, and ESIPT isomer in turn. Our work precisely elucidated the photophysical mechanism of DAHTS and the attribution of the triple fluorescence emission components, which provided valuable guidance for the development and regulation of bioactive fluorescence probes with multiband and multicolor emission characteristics.

Luminescence turn-on sensor for the selective detection of trace water and methanol based on a Zn(ii) coordination polymer with 2,5-dihydroxyterephthalate

A highly selective detection of trace water in organic solvents is urgently required for the chemical industry. In this work, the simple sonochemical method was used for producing a luminescent sensor, [Zn(H2dhtp)(2,2'-bpy)(H2O)]n (Zn-CP) (H2dhtp2- = 2,5-dihydroxyterephthalate and 2,2'-bpy = 2,2'-bipyridine). Zn-CP exhibits reversible thermally-induced and methanol-mediated structural transformation. Importantly, Zn-CP has exceptional water sensing performance in both dry methanol and dry ethanol, with high selectivity, wide linear ranges, and a low limit of detection (LOD) of 0.08% (v/v). Upon the incremental addition of water, the luminescent intensities enhanced and shifted, along with the emission color changing from green to greenish yellow. In addition, Zn-CP can detect methanol selectively through turn-on luminescence intensity with LODs of 0.28, 0.52, and 0.35% (v/v) in dry ethanol, dry n-propanol, and dry n-butanol, respectively. The excited-state proton transfer of linker H2dhtp2-via enol-keto tautomerism and collaboration with structural transformation could be attributed to the sensing mechanism.

Benzazole-Based ESIPT Fluorophores: Proton Transfer from the Chalcogen Perspective. A Combined Theoretical and Experimental Study

In this study, we present a comprehensive photophysical investigation of ESIPT-reactive benzazole derivatives in both solution and the solid state. These derivatives incorporate different chalcogen atoms (O, S, and Se) into their structures, and we explore how these variations impact their electronic properties in both ground and excited states. Changes in the UV-Vis absorption and fluorescence emission spectra were analyzed and correlated with the chalcogen atom and solvent polarity. In general, the spectral band of the benzazole derivative containing selenium was redshifted in both the ground and excited states compared to that of its oxygen and sulfur counterparts. Furthermore, we observed that the solvent played a distinctive role in influencing the ESIPT process within these compounds, underscoring once again the significant influence of the chalcogen atom on their photophysical behavior. Theoretical calculations provided a deeper understanding of the molecular dynamics, electronic structures, and photophysical properties of these compounds. These calculations highlighted the effect of chalcogen atoms on the molecular geometry, absorption and emission characteristics, and intramolecular hydrogen bonding, revealing intricate details of the ESIPT mechanism. The integration of experimental and computational data offers a detailed view of the structural and electronic factors governing the photophysical behavior of benzazole derivatives.

Water sensitive fluorescence tuning of V-shaped ESIPT fluorophores: Substituent effect and trace amount water sensing in DMSO

Highly sensitive nature of excited state intramolecular proton transfer (ESIPT) functionality in organic fluorophores made them potential candidates for developing environmental sensors and bioimaging applications. Herein, we report the synthesis of V-shaped Dapsone based Schiff base ESIPT derivatives (1-3) and water sensitive wide fluorescence tuning from blue to red in DMSO. Solid-state structural analysis confirmed the V-shaped molecular structure with intramolecular H-bonding and substituent dependent molecular packing in the crystal lattice. 1 showed strong solid-state fluorescence (λmax = 554 nm, Φf = 21.2 %) whereas methoxy substitution (2 and 3) produced tunable but significantly reduced fluorescence (λmax = 547 (2) and 615 nm (3), Φf = 2.1 (2) and 6.5 % (3)). Interestingly, aggregation induced emission (AIE) studies in DMSO-water mixture revealed water sensitive fluorescence tuning. The trace amount of water (less than 1 %) in DMSO converted the non-emissive 1-3 into highly emissive state due to keto tautomer formation. Further increasing water percentage produced deprotonated state of 1-3 in DMSO and enhanced the fluorescence intensity with red shifting of emission peak. At higher water fraction, 1-3 in DMSO produced aggregates and red shifted the emission with reduction of fluorescence intensity. The concentration dependent fluorescence study revealed the very low detection limit of water in DMSO. The limit of detection (LOD) of 1, 2 and 3 were 0.14, 1.04 and 0.65 % of water in DMSO. Hence, simple Schiff bases of 1-3 showed water concentration dependent keto isomer, deprotonated and aggregated state tunable fluorescence in DMSO. Further, scanning electron microscopic (SEM) studies of 1-3 showed water concentration controlled self-assembly and tunable fluorescence.