Highly sensitive biological and chemical sensors based on reversible fluorescence quenching in a conjugated polymer

A Perspective Looking Backward and Forward on the 25th Anniversary of Conjugated Polyelectrolytes

Conjugated polyelectrolytes are π-conjugated polymers that contain ionic charged groups such as sulfonate (R-SO3-), carboxylate (R-COO-), or ammonium (R-NR3+) combined with a π-conjugated backbone. This perspective provides a summary review of the key developments in the field, starting from the first reports of their synthesis and properties to application-focused developments. The applications include optical sensors for molecular and biomolecular targets, organic electronic applications, and specific biological applications including cellular imaging and photodynamic therapy. This perspective concludes with a discussion of where the field of conjugated polyelectrolytes is expected to lead in the coming years.

Linear and Nonlinear Optical Properties of All-cis and All-trans Poly(p-phenylenevinylene)

Poly(p-phenylenevinylene) (PPV) is a staple of the family of conjugated polymers with desirable optoelectronic properties for applications including light-emitting diodes (LEDs) and photovoltaic devices. Although the significant impact of olefin geometry on the steady-state optical properties of PPVs has been extensively studied, PPVs with precise stereochemistry have yet to be investigated using nonlinear optical spectroscopy for quantum sensing, as well as light harvesting for biological applications. Herein, we report our investigation of the influence of olefin stereochemistry on both linear and nonlinear optical properties through the synthesis of all-cis and all-trans PPV copolymers. We performed two-photon absorption (TPA) using a classical and entangled light source and compared both classical TPA and entangled two-photon absorption (ETPA) cross sections of these stereodefined PPVs. Whereas the TPA cross section of the all-trans PPV was expectedly higher than that of all-cis PPV, presumably because of the larger transition dipole moment, the opposite trend was measured via ETPA, with the all-cis PPV exhibiting the highest ETPA cross section. DFT calculations suggest that this difference might stem from the interaction of entangled photons with lower-lying electronic states in the all-cis PPV variant. Additionally, we explored the photoinduced processes for both cis and trans PPVs through time-resolved fluorescence upconversion and femtosecond transient absorption techniques. This study revealed that the sensitivity of PPVs in two-photon absorption varies with classical versus quantum light and can be modulated through the control of the geometry of the repeating alkenes, which is a key stepping stone toward their use in quantum sensing, bioimaging, and the design of polymer-based light-harvesting systems.

Conjugated Polymers for Aptasensing Applications

Rapid and specific assaying of molecules that report on a pathophysiological condition, environmental pollution, or drug concentration is pivotal for establishing efficient and accurate diagnostic systems. One of the main components required for the construction of these systems is the recognition element (receptor) that can identify target analytes. Oligonucleotide switching structures, or aptamers, have been widely studied as selective receptors that can precisely identify targets in different analyzed matrices with minimal interference from other components in an antibody-like recognition process. These aptasensors, especially when integrated into sensing platforms, enable a multitude of sensors that can outperform antibody-based sensors in terms of flexibility of the sensing strategy and ease of deployment to areas with limited resources. Research into compounds that efficiently enhance signal transduction and provide a suitable platform for conjugating aptamers has gained huge momentum over the past decade. The multifaceted nature of conjugated polymers (CPs), notably their versatile electrical and optical properties, endows them with a broad range of potential applications in optical, electrical, and electrochemical signal transduction. Despite the substantial body of research demonstrating the enhanced performance of sensing devices using doped or nanostructure-embedded CPs, few reviews are available that specifically describe the use of conjugated polymers in aptasensing. The purpose of this review is to bridge this gap and provide a comprehensive description of a variety of CPs, from a historical viewpoint, underpinning their specific characteristics and demonstrating the advances in biosensors associated with the use of these conjugated polymers.

Induced Self-Assembly and Disassembly of Alkynylplatinum(II) 2,6-Bis(benzimidazol-2'-yl)pyridine Complexes with Charge Reversal Properties: "Proof-of-Principle" Demonstration of Ratiometric Förster Resonance Energy Transfer Sensing of pH

A series of pH-responsive alkynylplatinum(II) 2,6-bis(benzimidazol-2'-yl)pyridine (bzimpy) complexes with charge-reversal properties was synthesized, and the supramolecular assemblies between conjugated polyelectrolyte, PFP-OSO₃^-, and [Pt{bzimpy(TEG)₂}{C≡C-C₆H₃-(COOH)₂-3,5}]Cl (1) have been studied using UV-vis absorption, emission, and resonance light scattering (RLS) spectroscopy. An efficient Förster resonance energy transfer (FRET) from PFP-OSO₃^- donor to the aggregated 1 as acceptor with the aid of Pt(II)···Pt(II) interactions has been presented, which leads to a growth of triplet metal-metal-to-ligand charge transfer (³MMLCT) emission in the low-energy red region. The two-component PFP-OSO₃^--1 ensemble was then exploited as a "proof-of-principle" concept strategy for pH sensing by tracking the ratiometric emission changes. With the aid of judicious molecular design on the pH-driven charge-reversal property, the polyelectrolyte-induced self-assembly and the FRET from PFP-OSO₃^- to the platinum(II) aggregates have been modulated. Together with its excellent reversibility and photostability, the extra stability provided by the Pt(II)···Pt(II) and π-π stacking interactions on top of the electrostatic and hydrophobic interactions existing in polyelectrolye-complex assemblies has led to a selective and sensitive pH sensing assay.

Recent Advances in Conjugated Polymer-Based Biosensors for Virus Detection

Nowadays, virus pandemics have become a major burden seriously affecting human health and social and economic development. Thus, the design and fabrication of effective and low-cost techniques for early and accurate virus detection have been given priority for prevention and control of such pandemics. Biosensors and bioelectronic devices have been demonstrated as promising technology to resolve the major drawbacks and problems of the current detection methods. Discovering and applying advanced materials have offered opportunities to develop and commercialize biosensor devices for effectively controlling pandemics. Along with various well-known materials such as gold and silver nanoparticles, carbon-based materials, metal oxide-based materials, and graphene, conjugated polymer (CPs) have become one of the most promising candidates for preparation and construction of excellent biosensors with high sensitivity and specificity to different virus analytes owing to their unique π orbital structure and chain conformation alterations, solution processability, and flexibility. Therefore, CP-based biosensors have been regarded as innovative technologies attracting great interest from the community for early diagnosis of COVID-19 as well as other virus pandemics. For providing precious scientific evidence of CP-based biosensor technologies in virus detection, this review aims to give a critical overview of the recent research related to use of CPs in fabrication of virus biosensors. We emphasize structures and interesting characteristics of different CPs and discuss the state-of-the-art applications of CP-based biosensors as well. In addition, different types of biosensors such as optical biosensors, organic thin film transistors (OTFT), and conjugated polymer hydrogels (CPHs) based on CPs are also summarized and presented.

Controlling π-Conjugated Polymer-Acceptor Interactions by Designing Polymers with a Mixture of π-Face Strapped and Nonstrapped Monomers

Controlling π-conjugated polymer-acceptor complex interaction, including the interaction strength and location along the polymer backbone, is central to organic electronics and energy applications. Straps in the strapped π-conjugated polymers mask the π-face of the polymer backbone and hence are useful to control the interactions of the π-face of the polymer backbone with other polymer chains and small molecules compared to the conventional pendant solubilizing chains. Herein, we have synthesized a series of strapped π-conjugated copolymers containing a mixture of strapped and nonstrapped comonomers to control the polymer-acceptor interactions. Simulations confirmed that the acceptor is directed toward the nonstrapped repeat unit. More importantly, strapped copolymers overcome a major drawback of homopolymers and display higher photoinduced photoluminescence (PL) quenching, which is a measure of electron transfer from the polymer to acceptor, compared to that of both the strapped homopolymer and the conventional polymer with pendant solubilizing chains. We have also shown that this strategy applies not only to strapped polymers, but also to the conventional polymers with pendant solubilizing chains. The increase in PL quenching is attributed to the absence of a steric sheath around the comonomers and their random location along the polymer backbone, which enhances the probability of non-neighbor acceptor binding events along the polymer backbone. Thus, by mixing insulated and noninsulated monomers along the polymer backbone, the location of the acceptor along the polymer backbone, polymer-acceptor interaction strength, and the efficiency of photoinduced charge transfer are controllable compared to the homopolymers.

Selective In Vitro and Ex Vivo Staining of Brain Neurofibrillary Tangles and Amyloid Plaques by Novel Ethylene Ethynylene-Based Optical Sensors

The identification of protein aggregates as biomarkers for neurodegeneration is an area of interest for disease diagnosis and treatment development. In this work, we present novel super luminescent conjugated polyelectrolyte molecules as ex vivo sensors for tau-paired helical filaments (PHFs) and amyloid-β (Aβ) plaques. We evaluated the use of two oligo-p-phenylene ethynylenes (OPEs), anionic OPE12- and cationic OPE24+, as stains for fibrillar protein pathology in brain sections of transgenic mouse (rTg4510) and rat (TgF344-AD) models of Alzheimer's disease (AD) tauopathy, and post-mortem brain sections from human frontotemporal dementia (FTD). OPE12- displayed selectivity for PHFs in fluorimetry assays and strong staining of neurofibrillary tangles (NFTs) in mouse and human brain tissue sections, while OPE24+ stained both NFTs and Aβ plaques. Both OPEs stained the brain sections with limited background or non-specific staining. This novel family of sensors outperformed the gold-standard dye Thioflavin T in sensing capacities and co-stained with conventional phosphorylated tau (AT180) and Aβ (4G8) antibodies. As the OPEs readily bind protein amyloids in vitro and ex vivo, they are selective and rapid tools for identifying proteopathic inclusions relevant to AD. Such OPEs can be useful in understanding pathogenesis and in creating in vivo diagnostically relevant detection tools for neurodegenerative diseases.

A short review article on conjugated polymers

This article provides a brief review of conjugated polymers and the various typical polymerization reactions exploited by the community to synthesise different conjugated polyelectrolytes with varied conjugated backbone systems. We further discuss with detailed emphasises the mechanism involved such as photo-induced electron transfer, resonance energy transfer, and intra-molecular charge transfer in the detection or sensing of various analytes. Owing to their excellent photo-physical properties, facile synthesis, ease of functionalization, good biocompatibility, optical stability, high quantum yield, and strong fluorescence emission. Conjugated polymers have been explored for wide applications such as chemical and biological sensors, drug delivery and drug screening, cancer therapeutics and imaging. As such we believe it will be a timely review article for the community.

Membrane-intercalating conjugated oligoelectrolytes

By acting as effective biomimetics of the lipid bilayers, membrane-intercalating conjugated oligoelectrolytes (MICOEs) can spontaneously insert themselves into both synthetic lipid bilayers and biological membranes. The modular and intentional molecular design of MICOEs enable a range of applications, such as bioproduction, biocatalysis, biosensing, and therapeutics. This tutorial review provides a structural evolution of MICOEs, which originated from the broader class of conjugated molecules, and analyses the drivers behind this evolutionary process. Various representative applications of MICOEs, accompanied by insights into their molecular design principles, will be reviewed separately. Perspectives on the current challenges and opportunities in research on MICOEs will be discussed at the end of the review to highlight their potential as unconventional and value-added materials for biological systems.

Association of two polyelectrolytes in salt solutions

The association of polyelectrolytes (PEs) in solution affects a wealth of structural and dynamic behaviors, and is also fundamentally important for an understanding of protein association and aggregation. Here, we theoretically study the association of two PE chains by addressing the stability and morphology of the non-spherical associates. Our theory predicts that an elongated pearl-necklace (PN) associate can be stable at high salt concentrations due to the screened electrostatic repulsion. This contradicts the implication of scaling theory. In addition, there is no one-to-one correspondence between the morphology of the associate and its constituting unimers, which is demonstrated by the existence of different association modes.

Rapid Detection of Escherichia coli: Optimized Peptide-Polythiophene Interactions Help Reduce Assay Time and Improve Naked-Eye Detection

Recent improvements in methods for rapid detection of microbial contamination in food and water samples have aided in the development of on-site and point-of-care testing. Early detection, made possible via on-site testing, can help limit the spread of food and waterborne illnesses. Recently, we reported a novel fluorescence-based Omptin-Polythiophene assay (the assay) to detect Escherichia coli in contaminated water samples. The assay targets OmpT─an E. coli outer membrane protease─and exploits the protease's ability to cleave at dibasic sites within a peptide. By combining a peptide substrate optimized for OmpT with a conjugated polythiophene reporter molecule whose optical properties vary upon interaction with the intact or cleaved peptide, we demonstrated the detection of 1-10 CFU/mL and 10⁵ CFU/mL E. coli in 5.5 and 1 h, respectively. In comparison, most microbial detection methods that rely on culturing and plating techniques take anywhere between 8 and 24 h to report their results. Herein we report significant improvements in the assay which include reducing the assay time from an already short 1 h to a mere 10 min for detecting E. coli in highly contaminated samples and augmenting the assay with colorimetric sensing capability for naked eye discernment under normal visible light or under UV-A light. These improvements were made possible by characterizing the optical changes resulting from the interaction of the peptide with five carboxylate-functionalized polythiophene variants carrying different 3- side chain carboxylic acids and by identifying preferential peptide substrates via the screening of ten peptide sequence variants for OmpT activity.

FRET-mediated quenching of BODIPY fluorescent nanoparticles by methylene blue and its application to bacterial imaging

High resolution and a good signal to noise ratio are a requirement in cell imaging. However, after labelling with fluorescent entities, and after several washing steps, there is often an unwanted fluorescent background that reduces the images resolution. For this purpose, we developed an approach to remove the signal from extra-cellular fluorescent nanoparticles (FNPs) during bacteria imaging, without the need for any washing steps. Our idea is to use methylene blue to quench > 90% of the emission of BODIPY-based fluorescent polymer nanoparticle by a FRET process. This "Hide-and-Seek Game" approach offers a novel strategy to apply fluorescence quenching in bioimaging to improve image accuracy.

Bioactive Composite Nanoparticles for Effective Microenvironment Regulation, Neuroprotection, and Cell Differentiation

Brain injuries typically result in neural tissue damage and trigger a permanent neurologic deficit. Current methods exhibit limited effects due to the harsh microenvironment of injury regions rich in reactive oxygen species (ROS). Herein, a microenvironment regulation combined with cellular differentiation strategy is designed for repairing injured nerves. We prepare PMNT/F@D-NP nanoparticles comprising a bioactive polythiophene derivative (PMNT) and fullerenol as a multifunctional theranostic nanoplatform. PMNT/F@D-NPs can significantly reduce the accumulation of ROS in the simulated ischemic brain injury trial and inhibit cell apoptosis due to the effective free radical scavenging ability of fullerenol. Interestingly, the bioactive PMNT/F@D-NPs can promote the proliferation and differentiation of neurons, confirmed by immunofluorescence and western blotting studies. This newly developed strategy exhibits a combinatorial therapeutic effect by promoting nerve cell survival and differentiation while improving the microenvironment in the damaged area, which paves the way for the rational design of multifunctional agents for brain injury therapy.

New classes of functionalized parylenes and poly(phenylene vinylene)s via coupling of dihaloxylyl diesters

New classes of poly(p-xylylene)s and poly(p-phenylene vinylene)s were synthesized and studied.

Recent Advances in the Development and Applications of Conjugated Polymer dots

Conjugated polymer dots or semiconducting polymer nanoparticles (Pdots) are nanoparticles prepared based on organic polymers. Pdots have the advantages of lower cost, simple preparation process, good biocompatibility, excellent stability, easy...

An enhanced fluorescence detection of a nitroaromatic compound using bacteria embedded in porous poly lactic-co-glycolic acid microbeads

The detection of explosive nitroaromatic compounds has caused worldwide concern for human safety. In this study, we introduce a fluorescent biosensor based on porous biocompatible microspheres loaded with a bioreporter for the detection of nitroaromatic compounds. Poly(lactic-co-glycolic acid) microbeads were designed as biosensors embedded with the bacterial bioreporters. The genetically engineered bacterial bioreporter can express a green fluorescent protein in response to nitroaromatic compounds (e.g., trinitrotoluene and dinitrotoluene). The modified surface structure in microbeads provides a large surface area, as well as easy penetration, and increases the number of attached bioreporters for enhanced fluorescent signals of biosensors. Moreover, the addition of the M13 bacteriophage in open porous microbeads significantly amplified the fluorescence signal for detection by the π-π interaction between peptides in the M13 bacteriophage and nitroaromatic compounds. The modification of the surface morphology, as well as the genetically engineered M13 phage, significantly amplifies the fluorescence signal, which makes the detection of explosives easier, and has great potential for the stand-off remote sensing of TNT buried in the field.

Redox Polymers for Tissue Engineering

This review will focus on the targeted design, synthesis and application of redox polymers for use in regenerative medicine and tissue engineering. We define redox polymers to encompass a variety of polymeric materials, from the multifunctional conjugated conducting polymers to graphene and its derivatives, and have been adopted for use in the engineering of several types of stimulus responsive tissues. We will review the fundamental properties of organic conducting polymers (OCPs) and graphene, and how their properties are being tailored to enhance material - biological interfacing. We will highlight the recent development of high-resolution 3D fabrication processes suitable for biomaterials, and how the fabrication of intricate scaffolds at biologically relevant scales is providing exciting opportunities for the application of redox polymers for both in-vitro and in-vivo tissue engineering. We will discuss the application of OCPs in the controlled delivery of bioactive compounds, and the electrical and mechanical stimulation of cells to drive behaviour and processes towards the generation of specific functional tissue. We will highlight the relatively recent advances in the use of graphene and the exploitation of its physicochemical and electrical properties in tissue engineering. Finally, we will look forward at the future of organic conductors in tissue engineering applications, and where the combination of materials development and fabrication processes will next unite to provide future breakthroughs.

Biological Sensing and Imaging Using Conjugated Polymers and Peptide Substrates

Peptides have been widely applied as targeting elements or enzyme-substrates in biological sensing and imaging. Conjugated Polymers (CPs) have emerged as a novel biosensing material and received considerable attention due to their excellent light absorption, strong fluorescence emission, as well as amplified quenching properties. In this review, we summarize the recent advances of using CPs and peptide substrates in biosensing and bioimaging. After a brief introduction of the advantages of CPs and peptide substrates, different sensing designs and mechanisms are discussed based on peptides' structures and functions, including targeting recognition elements, enzyme-substrates, and cell-penetrating elements. Applications of CPs and peptides in fluorescent imaging and Raman imaging in living cells are subsequently reviewed.

Poly(Pyridinium Salt)s Containing 2,7-Diamino-9,9'-Dioctylfluorene Moieties with Various Organic Counterions Exhibiting Both Lyotropic Liquid-Crystalline and Light-Emitting Properties

A series of poly(pyridinium salt)s-fluorene main-chain ionic polymers with various organic counterions were synthesized by using ring-transmutation polymerization and metathesis reactions. Their chemical structures were characterized by Fourier Transform Infrared (FTIR), proton (¹H), and fluorine 19 (¹⁹F) nuclear magnetic resonance (NMR) spectrometers. These polymers showed a number-average molecular weight (M_ns) between 96.5 and 107.8 kg/mol and polydispersity index (PDI) in the range of 1.12–1.88. They exhibited fully-grown lyotropic phases in polar protic and aprotic solvents at different critical concentrations. Small-angle X-ray scattering for one polymer example indicates lyotropic structure formation for 60–80% solvent fraction. A lyotropic smectic phase contains 10 nm polymer platelets connected by tie molecules. The structure also incorporates a square packing motif within platelets. Thermal properties of polymers were affected by the size of counterions as determined by differential scanning calorimetry and thermogravimetric analysis measurements. Their ultraviolet-visible (UV-Vis) absorption spectra in different organic solvents were essentially identical, indicating that the closely spaced π-π* transitions occurred in their conjugated polymer structures. In contrast, the emission spectra of polymers exhibited a positive solvatochromism on changing the polarity of solvents. They emitted green lights in both polar and nonpolar organic solvents and showed blue light in the film-states, but their λ_em peaks were dependent on the size of the counterions. They formed aggregates in polar aprotic and protic solvents with the addition of water (v/v, 0–90%), and their λ_em peaks were blue shifted.

Physical insights into protection effect of conjugated polymers by natural antioxidants

Conjugated polymers (CPs) known as organic semiconductors have been broadly applied in photovoltaic and light emitting devices due to their easy fabrication and flexibility. However, one of the bottlenecks limiting the application of CPs is their poor photostability upon continuous excitation which is one of the crucial parameters of CPs. How to improve the photostability of CPs is always one of the key questions in this field. In this work, we found that the photostability of poly(3-hexylthiophene-2,5-diyl) (P3HT) molecules can be largely improved by addition of vitamin E (VE) in bulk solution, solid films and single molecules. In solution and films, VE can not only significantly retard the photodegradation of P3HT but also enhance the fluorescence intensity. For individual P3HT molecules, with increasing VE concentrations, the on-time duration increases and the off-time duration becomes shorter. VE as natural antioxidants can not only donate electrons to the long-lived charged species but also quench the triplet states of CPs via energy transfer accelerating the depopulation process back to the ground state. The short duration time of the charged species and the triplet states provides higher fluorescence intensity. Furthermore, VE can also directly react with singlet oxygen or other reactive oxygen species (ROS) preventing them from reacting with CPs. These results not only provide an efficient strategy for improving the photostability of conjugated polymers in solution and films, but also shed light on better understanding the photophysics of conjugated polymers at single-molecule level.

Implications of relaxation dynamics of collapsed conjugated polymeric nanoparticles for light-harvesting applications

The mechanism of the formation of nanoparticles (collapsed state) from the extended state of polymers and their ultrafast excited state relaxation dynamics are illustrated.

Architectures and Applications of BODIPY-Based Conjugated Polymers

Conjugated polymers generally contain conjugated backbone structures with benzene, heterocycle, double bond, or triple bond, so that they have properties similar to semiconductors and even conductors. Their energy band gap is very small and can be adjusted via chemical doping, allowing for excellent photoelectric properties. To obtain prominent conjugated materials, numerous well-designed polymer backbones have been reported, such as polyphenylenevinylene, polyphenylene acetylene, polycarbazole, and polyfluorene. 4,4'-Difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY)-based conjugated polymers have also been prepared owing to its conjugated structure and intriguing optical properties, including high absorption coefficients, excellent thermal/photochemical stability, and high quantum yield. Most importantly, the properties of BODIPYs can be easily tuned by chemical modification on the dipyrromethene core, which endows the conjugated polymers with multiple functionalities. In this paper, BODIPY-based conjugated polymers are reviewed, focusing on their structures and applications. The forms of BODIPY-based conjugated polymers include linear, coiled, and porous structures, and their structure-property relationship is explored. Also, typical applications in optoelectronic materials, sensors, gas/energy storage, biotherapy, and bioimaging are presented and discussed in detail. Finally, the review provides an insight into the challenges in the development of BODIPY-based conjugated polymers.

Computational Investigation of the Binding Dynamics of Oligo p-Phenylene Ethynylene Fluorescence Sensors and Aβ Oligomers

Amyloid protein aggregates are pathological hallmarks of neurodegenerative disorders such as Alzheimer's (AD) and Parkinson's (PD) diseases and are believed to be formed well before the onset of neurodegeneration and cognitive impairment. Monitoring the course of protein aggregation is thus vital to understanding and combating these diseases. We have recently demonstrated that a novel class of fluorescence sensors, oligomeric p-phenylene ethynylene (PE)-based electrolytes (OPEs) selectively bind to and detect prefibrillar and fibrillar aggregates of AD-related amyloid-β (Aβ) peptides over monomeric Aβ. In this study, we investigated the binding between two OPEs, anionic OPE12- and cationic OPE24+, and to two different β-sheet rich Aβ oligomers using classical all-atom molecular dynamics simulations. Our simulations have revealed a number of OPE binding sites on Aβ oligomer surfaces, and these sites feature hydrophobic amino acids as well as oppositely charged amino acids. Binding energy calculations show energetically favorable interactions between both anionic and cationic OPEs with Aβ oligomers. Moreover, OPEs bind as complexes as well as single molecules. Compared to free OPEs, Aβ protofibril bound OPEs show backbone planarization with restricted rotations and reduced hydration of the ethyl ester end groups. These characteristics, along with OPE complexation, align with known mechanisms of binding induced OPE fluorescence turn-on and spectral shifts from a quenched, unbound state in aqueous solutions. This study thus sheds light on the molecular-level details of OPE-Aβ protofibril interactions and provides a structural basis for fluorescence turn-on sensing modes of OPEs.

Supramolecular Sensor for Astringent Procyanidin C1: Fluorescent Artificial Tongue for Wine Components

An artificial tongue that detects astringent components for a comprehensive evaluation of taste has not been established to date. Herein, we first propose fluorescent polythiophene (PT) derivatives (S1-S3) modified with 3-pyridinium boronic acid as supramolecular chemosensors for wine components including astringent procyanidin C1. After numerous attempts for the synthetic conditions, more than 95 mol % of the PT unit was modified with the pyridinium boronic acid moiety. To evaluate the PT derivatives as chemosensors of the artificial tongue, qualitative and quantitative analyses were performed with four types of wine components (i.e., sweet, sour, bitter, and astringent tastes) in combination with pattern recognition models. Notably, procyanidin C1 in the actual wine sample was successfully detected in a quantitative manner. In other words, we have established an authentic artificial tongue using PT based supramolecular chemosensors.

Aggregation-Enhanced Two-Photon Absorption of Anionic Conjugated Polyelectrolytes

The two-photon absorption properties of anionic poly(phenylene ethynylene)-type conjugated oligo- and polyelectrolytes are studied in molecularly dissolved and aggregated forms in aqueous solution. Several different polyvalent cations are used to induce aggregation. It is found that both materials in the aggregated form exhibit enhanced two-photon excited fluorescence (2PEF) and two-photon cross section (σ₂) compared with the molecularly dissolved structures. The 2PEF and σ₂ are unaffected by the nature of the polyvalent cation that is used to induce aggregation. The two-photon absorption cross section enhancement arises because of the increase in the difference dipole moment (Δμ) in the aggregates of the conjugated materials, an effect that is attributed to the introduction of charge transfer character into the aggregate excited state.

A Remarkable Fluorescence Quenching Based Amplification in ATP Detection through Signal Transduction in Self-Assembled Multivalent Aggregates

Signal transduction is essential for the survival of living organisms, because it allows them to respond to the changes in external environments. In artificial systems, signal transduction has been exploited for the highly sensitive detection of analytes. Herein, a remarkable signal transduction, upon ATP binding, in the multivalent fibrillar nanoaggregates of anthracene conjugated imidazolium receptors is reported. The aggregates of one particular amphiphilic receptor sensed ATP in high pm concentrations with one ATP molecule essentially quenching the emission of thousands of receptors. A cooperative merging of the multivalent binding and signal transduction led to this superquenching and translated to an outstanding enhancement of more than a millionfold in the sensitivity of ATP detection by the nanoaggregates; in comparison to the "molecular" imidazolium receptors. Furthermore, an exceptional selectivity to ATP over other nucleotides was demonstrated.

A water-soluble bithiophene with increased photoluminescence efficiency and metal recognition ability

A new water-soluble tri-tert-butyl-bithiophenesulfonamide (α2-tbS) was synthesized and a comprehensive spectroscopic and photophysical study was undertaken in organic solvents and water at different pH values. In contrast to the behaviour found for the parent (and un-substituted) α,α'-bithiophene (α2), in which radiationless decay processes are the main excited-state deactivation channels, the tert-butylsulfonamide derivative presents a significant fluorescence quantum yield (φF) (ca. one order of magnitude higher than that of α2). The high φF allowed further exploring α2-tbS as a selective fluorimetric sensor for metal ions. A strong selectivity towards Cu(ii) is observed at neutral pH values, whereas at pH = 9.5 a strong quenching upon the addition of Hg(ii) is observed. An additional high sensitivity of 0.64 ± 0.02 ppm towards Cu(ii) was observed, well below 1.25 ppm (∼20 μM), the maximum value allowed in drinking water by the EPA.

Functional Polymers and Polymer-Dye Composites for Food Sensing

The sensitive, safe, and portable detection of food spoilage is becoming unprecedentedly important because it is closely related to the public health and economic development, particularly given the globalization of food supply chain. However, the existing approaches for food monitoring are still limited to meet these requirements. To address this challenge, much research has been done to develop an ideal food sensor that can indicate food quality in real-time in a sensitive and reliable way. So far, many sensors such as time-temperature indicators, smart trademarks, colorimetric tags, electronic noses, and electronic tongues, have been developed and even commercialized. In this feature article, the recent progress of food sensors based on functional polymers, including the molecular design of polymer structures, sensing mechanisms, and relevant processing techniques to fabricate a variety of food sensor devices is reviewed.

Effect of Thermal Annealing on Conformation of MEH-PPV Chains in Polymer Matrix: Coexistence of H- and J-Aggregates

In diluted solid solution using poly(2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV) and polymethyl methacrylate (PMMA) or polystyrene (PS), both aggregated and extended conformations could be formed according to the weight ratio. Aggregated conformation in as-cast MEH-PPV/PMMA film presented a J-aggregate-like photoluminescence (PL) emission. After annealing at 160 °C, its PL showed characteristics of both J- and H-aggregates at the same time; however, extended conformation showed an oligomer-like emission, which was not sensitive to either measurement temperature or annealing temperature. Thus, the conformation transition between aggregated and extended is unlikely to happen in MEH-PPV/PMMA blends during thermal annealing. On the contrary, in MEH-PPV/PS blends, extended conformation dominated in as-cast film with oligomer-like emissions; after annealing at 160 °C, both J- and H- aggregate-like PL emissions were observed, indicating the conformation transitioned from extended to aggregated. Therefore, our work may suggest a new method to manipulate photophysical properties of conjugated polymers by combining appropriate host matrix and thermal annealing processes.

Photoluminescent Response of Poly(3-methylthiophene)-DNA Single Nanowire Correlating to Nucleotide-Mismatch Locus in DNA-DNA Hybridization

π-Conjugated polymers have become qualified candidates for biosensing owing to their unique optoelectronic properties and excellent biocompatibility. In this contribution, nucleotide mismatches in DNA hybridization, being variable in position, are reflected in a stark manner by poly(3-methylthiophene) (P3MT) nanowires (NWs), in which probe DNA sequence is properly functionalized. Selected as the systematic investigation are complementary target DNA (tDNA), random sequence DNA, and three kinds of 1-mer mismatched tDNAs with different mismatch loci away from the NW's surface. Nanoscale optical observation of the single P3MT NWs in solid states reveals that the more distant the mismatch position is from the surface, the higher the photoluminescence (PL) occurs, while the complementary sequence yields the highest but the random one remains the lowest. Hence, the PL intensity increases with the relative length of the DNA-DNA hybridization from the surface. These results deliver a new basis that π-conjugated polymers can be potentially applicable to detailed nucleotide analyses as in single nucleotide polymorphism.

Quinonoid vs. aromatic structures of heteroconjugated polymers from oligomer calculations

Conjugated polymers with quinonoid ground states can display low optical band gaps. The design of novel conjugated polymers with quinonoid ground states offers insights into the relative stabilities of aromatic vs. quinonoid structures. In this work, we present parameters such as the quinonoid (Q)/aromatic (A) energy difference, the band gap, and the C-C distances between the repeat units. This study reveals eight new polymers which exist in quinonoid ground state among twenty-nine polymers of varying structural composition that were subject to analysis. We expect that copolymerizing such quinonoid ground state monomers with aromatic ground state monomers will modulate the bandgap of the resulting polymers.

Homogeneous immunoassay for alpha-fetoprotein based on the quenching of the fluorescence of quantum dots by antibody labelled with complexed copper ion tags

A homogeneous fluorescent immunoassay is described for the determination of alpha fetoprotein (AFP) relying on the interaction between copper ion complex and quantum dots (QDs). The copper ion complex-labelled antibody can be employed as a quencher of fluorescence of QDs and capture probe of AFP in homogeneous solution. The labelled antibody is mixed with QDs to form the immune ensemble probe. Upon the addition of AFP, the labelled antibody is stripped away from QDs by antigen-antibody combination leading to the increase in the fluorescence signal. Thus, the determination of AFP can be realized by fluorometry (best measured at excitation/emission wavelengths of 360/520 nm). The fluorescence intensity shows a good linear relationship with the AFP concentration ranging from 40 to 640 ng mL^-1, and the LOD is 26 ng mL^-1. The proposed method provides a new approach to incorporate metal complexes into QD-based biomolecule sensing. Graphical abstract Schematic presentation of a fluorescent probe comprised of quantum dots and antibody labelled with copper ion complex for homogeneous immunoassay of α-fetoprotein. The target antigen can break up the ground state QD/labelled antibody complex to set free the fluorescent QDs.

Redox-Based Electrochemical Affinity Sensor for Detection of Aqueous Pertechnetate Anion

Rapid, selective, and in situ detection of pertechnetate (TcO₄^-) in multicomponent matrices consisting of interfering anions such as the ubiquitous NO₃^- and Cl^- or the isostructural CrO₄^2- is challenging. Present sensors lack the selectivities to exclude these interferences or the sensitivities to meet detection limits that are lower than the drinking water standards across the globe. This work presents an affinity-based electrochemical sensor for TcO₄^- detection that relies on selective reductive precipitation of aqueous TcO₄^- induced by a 1,4-benzenedimethanethiol capture probe immobilized on an electrode platform. This results in a direct decrease in the electron transfer current, the magnitude of the decrease being proportional to the amount of TcO₄^- added. Using this approach, a detection limit of 1 × 10^-10 M was achieved, which is lower than the drinking water standard of 5.2 × 10^-10 M set by United States Environmental Protection Agency. The proposed approach shows selectivity to the TcO₄^- anion, allowing detection of TcO₄^- from a multicomponent groundwater sample obtained from a well at the Hanford site in Washington (well 299-W19-36) that also contained NO₃^-, Cl^-, and CrO₄^2-, without discernably affecting the detection limits.

Metal-Organic Framework-Based Microfluidic Impedance Sensor Platform for Ultrasensitive Detection of Perfluorooctanesulfonate

The growing global concerns to public health from human exposure to perfluorooctanesulfonate (PFOS) require rapid, sensitive, in situ detection where current, state-of-the-art techniques are yet to adequately meet sensitivity standards of the real world. This work presents, for the first time, a synergistic approach for the targeted affinity-based capture of PFOS using a porous sorbent probe that enhances detection sensitivity by embedding it on a microfluidic platform. This novel sorbent-containing platform functions as an electrochemical sensor to directly measure PFOS concentration through a proportional change in electrical current (increase in impedance). The extremely high surface area and pore volume of mesoporous metal-organic framework (MOF) Cr-MIL-101 is used as the probe for targeted PFOS capture based on the affinity of the chromium center toward both the fluorine tail groups as well as the sulfonate functionalities as demonstrated by spectroscopic (NMR and XPS) and microscopic (TEM) studies. Answering the need for an ultrasensitive PFOS detection technique, we are embedding the MOF capture probes inside a microfluidic channel, sandwiched between interdigitated microelectrodes (IDμE). The nanoporous geometry, along with interdigitated microelectrodes, increases the signal-to-noise ratio tremendously. Further, the ability of the capture probes to interact with the PFOS at the molecular level and effectively transduce that response electrochemically has allowed us achieve a significant increase in sensitivity. The PFOS detection limit of 0.5 ng/L is unprecedented for in situ analytical PFOS sensors and comparable to quantification limits achieved using state-of-the-art ex situ techniques.

Conjugated polymers as nanoparticle probes for fluorescence and photoacoustic imaging

In this review, the role of conjugated polymer nanoparticles (CPNs) in emerging bioimaging techniques is described.

The luminescent and photophysical properties of covalent organic frameworks

This review highlights the luminescent and unique photophysical properties of covalent organic frameworks. Their potential use in applications related to chemical sensing, photocatalysis, and optoelectronics are discussed.

Molecular probe designviathe “covalent-assembly” principle

Fluorescent probes are useful molecular tools. We summarize the recent progress with the “covalent-assembly” design principle, which warrants high-performance fluorescence probes exhibiting a highly sensitive turn-on signal from the dark background.

Gel Trapping Enables Optical Spectroscopy of Single Solvated Conjugated Polymers in Equilibrium

Single-molecule studies have provided a wealth of insight into the photophysics of conjugated polymers in the solid and desolvated state. Desolvating conjugated chains, e.g., by their embedding in inert solid matrices, invariably leads to chain collapse and the formation of intermolecular aggregates, which have a pronounced effect on their properties. By contrast, the luminescent properties of individual semiconducting polymers in their solvated and thermodynamic state remain largely unexplored. In this paper, we demonstrate a versatile gel trapping technique that enables the chemistry-free immobilization and interrogation of individual conjugated macromolecules, which retain a fully equilibrated conformation by contrast to conventional solid-state immobilization methods. We show how the technique can be used to record full luminescence spectra of single chains, to evaluate their time-resolved fluorescence, and to probe their photodynamics. Finally, we explore how the photophysics of different conjugated polymers is strongly affected by desolvation and chain collapse.