Iron Sulfide Na2 FeS2 as Positive Electrode Material with High Capacity and Reversibility Derived from Anion-Cation Redox in All-Solid-State Sodium Batteries

It is desirable for secondary batteries to have high capacities and long lifetimes. This paper reports the use of Na₂ FeS₂ with a specific structure consisting of edge-shared and chained FeS₄ as the host structure and as a high-capacity active electrode material. An all-solid-state sodium cell that uses Na₂ FeS₂ exhibits a high capacity of 320 mAh g^-1 , which is close to the theoretical two-electron reaction capacity of 323 mAh g^-1 , and operates reversibly for 300 cycles. The excellent electrochemical properties of all-solid-state sodium cells are derived from the anion-cation redox and rigid host structure during charging/discharging. In addition to the initial one-electron reaction of Na_x FeS₂ (1 ≤ x ≤ 2) activated Fe²⁺ /Fe³⁺ redox as the main redox center, the reversible sulfur redox further contributes to the high capacity. Although the additional sulfur redox affects the irreversible crystallographic changes, stable and reversible redox reactions are observed without capacity fading, owing to the local maintenance of the chained FeS₄ in the host structure. Sodium iron sulfide Na₂ FeS₂ , which combines low-cost elements, is one of the candidates that can meet the high requirements of practical applications.

Effectiveness of Snail Slime in the Green Synthesis of Silver Nanoparticles

The development of green, low cost and sustainable synthetic routes to produce metal nanoparticles is of outmost importance, as these materials fulfill large scale applications in a number of different areas. Herein, snail slime extracted from Helix Aspersa snails was successfully employed both as bio-reducing agent of silver nitrate and as bio-stabilizer of the obtained nanoparticles. Several trials were carried out by varying temperature, the volume of snail slime and the silver nitrate concentration to find the best biogenic pathway to produce silver nanoparticles. The best results were obtained when the synthesis was performed at room temperature and neutral pH. UV-Visible Spectroscopy, SEM-TEM and FTIR were used for a detailed characterization of the nanoparticles. The obtained nanoparticles are spherical, with mean diameters measured from TEM images ranging from 15 to 30 nm and stable over time. The role of proteins and glycoproteins in the biogenic production of silver nanoparticles was elucidated. Infrared spectra clearly showed the presence of proteins all around the silver core. The macromolecular shell is also responsible of the effectiveness of the synthesized AgNPs to inhibit Gram positive and Gram negative bacterial growth.

The critical role of nanoparticle sizes in the interactions between gold nanoparticles and ABC transporters in zebrafish embryos

Despite the increasing evidences for adenosine triphosphate-binding cassette (ABC transporters)-mediated efflux of nanoparticles, the universality of these phenomena and the determining factors for the process remained to be clarified. This paper aimed to systemically investigate the role of nanoparticle size in the interactions between adenosine triphosphate-binding cassette (ABC transporters) and gold nanoparticles (AuNPs, 3 nm, 19 nm, and 84 nm, named as Au-3, Au-19, and Au-84) in zebrafish embryos. The results showed that all the three AuNPs induced significant toxicity as reflected by delayed hatching of embryos, decreased glutathione (GSH) contents, and increased reactive oxygen species (ROS) levels. Under the hindrance of embryo chorions, smaller AuNPs could more easily accumulate in the embryos, causing higher toxicity. Addition of transporter inhibitors enhanced the accumulation and toxicity of Au-3 and Au-19, and these nanoparticles induced the expressions of abcc2 and abcb4, indicating a fact that Au-3 and Au-19 were the potential substrates of ABC transporters, but these phenomena were barely found for Au-84. On the contrary, Au-84 suppressed the gene expressions of various ABC transporters like abcc1, abcg5, and abcg8. With specific suppressors, transcription factors like nuclear factor-erythroid 2-related factor-2 (Nrf2) and pregnane X receptor (Pxr) were found to be important in the induction of ABC transporters by AuNPs. After all, these results revealed a vital role of nanoparticle sizes in the interactions between ABC transporters and AuNPs in zebrafish embryos, and the critical size could be around 19 nm. Such information would be beneficial in assessing the environmental risk of nanoparticles, as well as their interactions with other chemical toxicants.

Fluorous-Tagged Peptide Nanoparticles Ameliorate Acute Lung Injury via Lysosomal Stabilization and Inflammation Inhibition in Pulmonary Macrophages

Acute lung injury (ALI)/acute respiratory distress syndrome (ARDS) is a common respiratory critical syndrome that currently has no effective therapeutic interventions. Pulmonary macrophages play a principal role in the initiation and progression of the overwhelming inflammation in ALI/ARDS. Here, a type of fluorous-tagged bioactive peptide nanoparticle termed CFF13F is developed, which can be efficiently internalized by macrophages and suppress the excessive expression of cytokines and the overproduction of reactive oxygen species (ROS) triggered by lipopolysaccharide (LPS). The cytoprotective effect of CFF13F may be attributed to the lysosomal-stabilization property and regulation of the antioxidative system. Moreover, intratracheal pretreatment with CFF13F can effectively reduce local and systematic inflammation, and ameliorate pulmonary damage in an LPS-induced ALI murine model. The therapeutic efficacy of CFF13F is affected by the administration routes, and the local intratracheal injection is found to be the optimal choice for ALI treatment, with preferred biodistribution profiles. The present study provides solid evidence of the potent immunomodulatory bioactivity of the fluorous-tagged peptide nanoparticles CFF13F in vitro and in vivo, and sheds light on the development of novel efficient nanodrugs for ALI/ARDS.

Modification of erythrocytes by internalizing Arg-Gly-Asp (iRGD) in boosting the curative effect of radiotherapy for gastric carcinoma

BACKGROUND

Radiation resistance remains the leading cause of radiotherapy (RT) failure. The development of tumor-specific targeted sensitizers is key to overcoming radiation resistance. Our early data showed that cancer cell penetration was simulated by internalizing arginine-glycine-aspartic acid (iRGD), and the irradiation efficacy was improved. The present study aims to design and fabricate iRGD-modified red blood cell (RBCs) for tumor targeting and RT enhancement, and to evaluate its safety and efficacy in vivo.

METHODS

1,2-Distearoyl-sn-glycero-3-phosphoethanolamine-poly ethylene glycol-iRGD (DSPE-PEG-iRGD) was used to modify RBCs by a lipid-insertion method without direct chemical bioconjugation. Fluorescent dyes were used to trace the functional RBCs through confocal microscopy examination. In vitro stability evaluation was performed using cell culture medium incubation for 48 h followed by fluorescence decay assay. Furthermore, a subcutaneous cancer cell mouse model was constructed with MKN-45 cells for target efficacy and RT enhancement evaluation with DSPE-PEG-iRGD-modified RBCs (RBC-iRGD).

RESULTS

Successful construction of RBC-iRGD was verified by the presence of the yellow fluorescence, and an approximately 10⁸ iRGD molecules were labeled on a single RBC. The final RBC-iRGD showed good stability without any hemolytic effects in the cell culture medium. Moreover, higher fluorescence intensity and decreased liver and spleen accumulation could be observed in RBC-iRGD compared to RBC + iRGD in vivo. The RBC-iRGD exerted enhanced radiosensitivity in subcutaneous gastric tumor mice.

CONCLUSIONS

The RBC-iRGD exerted good tumor-targeting efficacy and favorable effects for RT enhancement in vivo.

Bottom-up design of hydrogels for programmable drug release

Hydrogels are a promising drug delivery system for biomedical applications due to their biocompatibility and similarity to native tissue. Programming the release rate from hydrogels is critical to ensure release of desired dosage over specified durations, particularly with the advent of more complicated medical regimens such as combinatorial drug therapy. While it is known how hydrogel structure affects release, the parameters that can be explicitly controlled to modulate release ab initio could be useful for hydrogel design. In this review, we first survey common physical models of hydrogel release. We then extensively go through the various input parameters that we can exercise direct control over, at the levels of synthesis, formulation, fabrication and environment. We also illustrate some examples where hydrogels can be programmed with the input parameters for temporally and spatially defined release. Finally, we discuss the exciting potential and challenges for programming release, and potential implications with the advent of machine learning.

Metal-Cyclic Dinucleotide Nanomodulator-Stimulated STING Signaling for Strengthened Radioimmunotherapy of Large Tumor

Combined treatment of immunotherapy and radiotherapy shows promising therapeutic effects for the regression of a variety of cancers. However, even multi-modality therapies often fail to antagonize the regression of large tumors due to the extremely immunosuppressive tumor microenvironment (TME). Here, a radioimmunotherapeutic paradigm based on stimulator of interferon genes (STING)-dependent signaling is applied to preclude large tumor progression by utilizing the metal-cyclic dinucleotide (CDN) nanoplatform, which integrates STING agonist c-di-AMP and immunomodulating microelement manganese (II) within the tannic acid nanostructure (TMA-NPs). As observed by magnetic resonance imaging, the localized administration of TMA-NPs effectively relieves hypoxia within TME and causes radical oxygen species overproduction and apoptosis in cancer cells after exposure to X-ray irradiation. The DNA fragments released from the apoptotic cells after the combined treatment augment the production of endogenous CDNs in cancer cells, hence significantly activating the STING-mediated pathway for stronger anti-tumor immunity. The localized therapy of TMA-NPs + X-ray not only inhibits the primary large tumor progression but also retards distant tumor growth by promoting dendritic cell maturation and activating cytotoxic immune cells whil suppressing immunosuppressive cells. Therefore, this work represents the combinatorial potency of TMA-NPs and X-rays on large tumor regression through strengthened STING-mediated radioimmunotherapeutics.

Multinuclear MRI in Drug Discovery

The continuous development of magnetic resonance imaging broadens the range of applications to newer areas. Using MRI, we can not only visualize, but also track pharmaceutical substances and labeled cells in both in vivo and in vitro tests. ¹H is widely used in the MRI method, which is determined by its high content in the human body. The potential of the MRI method makes it an excellent tool for imaging the morphology of the examined objects, and also enables registration of changes at the level of metabolism. There are several reports in the scientific publications on the use of clinical MRI for in vitro tracking. The use of multinuclear MRI has great potential for scientific research and clinical studies. Tuning MRI scanners to the Larmor frequency of a given nucleus, allows imaging without tissue background. Heavy nuclei are components of both drugs and contrast agents and molecular complexes. The implementation of hyperpolarization techniques allows for better MRI sensitivity. The aim of this review is to present the use of multinuclear MRI for investigations in drug delivery.

The Mn-modified porphyrin metal-organic framework with enhanced oxidase-like activity for sensitively colorimetric detection of glutathione

The selective detection of glutathione (GSH) has been used as important colorimetric probe for human health. Herein, we used a facile method to synthesize manganese ions modified porphyrin metal-organic framework (PCN-224-Mn) with a size of 125.7 ± 14.2 nm and zeta potential of -3.9 ± 0.5 mV. We showed that PCN-224-Mn catalyzed oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the absence of H₂O₂, resulting in a blue-colored oxidized TMB (oxTMB) that exhibits oxidase-like activity. Furthermore, a simple colorimetric detection method for GSH was developed based on the oxidase-like activity of PCN-224-Mn. This method shows wide linear detection range of 0.5-60 μM for GSH with a much lower detection limit of 0.233 μM. Finally, the recovery of colorimetric sensor of PCN-224-Mn suggests its great potential as a biosensor. As the catalytically active site, the manganese porphyrin unit plays a major role in the oxidase-like property and detection ability of PCN-224-Mn. Our data suggest that GSH detection method using PCN-224-Mn has great potential in multiple applications in the future.

Theoretical Progress of 2D Six-Membered-Ring Inorganic Materials as Anodes for Non-Lithium-Ion Batteries

The use and storage of renewable and clean energy has become an important trend due to resource depletion, environmental pollution, and the rising price of refined fossil fuels. Confined by the limited resource and uneven distribution of lithium, non-lithium-ion batteries have become a new focus for energy storage. The six-membered-ring (SMR) is a common structural unit for numerous material systems. 2D SMR inorganic materials have unique advantages in the field of non-lithium energy storage, such as fast electrochemical reactions, abundant active sites and adjustable band gap. First-principles calculations based on density functional theory (DFT) can provide a basic understanding of materials at the atomic-level and establish the relationship between SMR structural units and electrochemical energy storage. In this review, the theoretical progress of 2D SMR inorganic materials in the field of non-lithium-ion batteries in recent years is discussed to summarize the common relationship among 2D SMR non-lithium energy storage anodes. Finally, the existing challenges are analyzed and potential solutions are proposed.

EV-ADD, a database for EV-associated DNA in human liquid biopsy samples

Extracellular vesicles (EVs) play a key role in cellular communication both in physiological conditions and in pathologies such as cancer. Emerging evidence has shown that EVs are active carriers of molecular cargo (e.g. protein and nucleic acids) and a powerful source of biomarkers and targets. While recent studies on EV‐associated DNA (EV‐DNA) in human biofluids have generated a large amount of data, there is currently no database that catalogues information on EV‐DNA. To fill this gap, we have manually curated a database of EV‐DNA data derived from human biofluids (liquid biopsy) and in‐vitro studies, called the Extracellular Vesicle‐Associated DNA Database (EV‐ADD). This database contains validated experimental details and data extracted from peer‐reviewed published literature. It can be easily queried to search for EV isolation methods and characterization, EV‐DNA isolation techniques, quality validation, DNA fragment size, volume of starting material, gene names and disease context. Currently, our database contains samples representing 23 diseases, with 13 different types of EV isolation techniques applied on eight different human biofluids (e.g. blood, saliva). In addition, EV‐ADD encompasses EV‐DNA data both representing the whole genome and specifically including oncogenes, such as KRAS, EGFR, BRAF, MYC, and mitochondrial DNA (mtDNA). An EV‐ADD data metric system was also integrated to assign a compliancy score to the MISEV guidelines based on experimental parameters reported in each study. While currently available databases document the presence of proteins, lipids, RNA and metabolites in EVs (e.g. Vesiclepedia, ExoCarta, ExoBCD, EVpedia, and EV‐TRACK), to the best of our knowledge, EV‐ADD is the first of its kind to compile all available EV‐DNA datasets derived from human biofluid samples. We believe that this database provides an important reference resource on EV‐DNA‐based liquid biopsy research, serving as a learning tool and to showcase the latest developments in the EV‐DNA field. EV‐ADD will be updated yearly as newly published EV‐DNA data becomes available and it is freely available at www.evdnadatabase.com.

Leveraging Nanomechanical Perturbations in Raman Spectro-Immunoassays to Design a Versatile Serum Biomarker Detection Platform

While immunoassays are pivotal to medical diagnosis and bioanalytical chemistry, the current landscape of public health has catalyzed an important shift in the requirements of immunoassays that demand innovative solutions. For example, rapid, label-free, and low-cost screening of a given analyte is required to inform the best countermeasures to combat infectious diseases in a timely manner. Yet, the current design of immunoassays cannot accommodate such requirements as constraint by accumulative challenges, such as repeated incubation and washing, and the need of two types of antibodies in the sandwich format. To provide a potential solution, herein, a plasmonic Raman immunoassay with single-antibody, multivariate regression, and shift-of-peak strategies, coined as the PRISM assay, for serum biomarkers detection, is reported. The PRISM assay relies on Raman reporter-antibody conjugates to capture analytes on a plasmonic substrate. The ensuing nanomechanical perturbations to vibration of Raman reporters induce subtle but characteristic spectral changes that encode rich information related to the captured analytes. By fusing Raman spectroscopy and chemometric analysis, both Raman frequency shift- and multivariate regression models for sensitive detection of biomarkers are developed. The PRISM assay is expected to find a wide range of applications in clinical diagnosis, food safety surveillance, and environmental monitoring.

Metasurface optofluidics for dynamic control of light fields

The ability to manipulate light and liquids on integrated optofluidics chips has spurred a myriad of important developments in biology, medicine, chemistry and display technologies. Here we show how the convergence of optofluidics and metasurface optics can lead to conceptually new platforms for the dynamic control of light fields. We first demonstrate metasurface building blocks that display an extreme sensitivity in their scattering properties to their dielectric environment. These blocks are then used to create metasurface-based flat optics inside microfluidic channels where liquids with different refractive indices can be directed to manipulate their optical behaviour. We demonstrate the intensity and spectral tuning of metasurface colour pixels as well as on-demand optical elements. We finally demonstrate automated control in an integrated meta-optofluidic platform to open up new display functions. Combined with large-scale microfluidic integration, our dynamic-metasurface flat-optics platform could open up the possibility of dynamic display, imaging, holography and sensing applications.

Magnetic Alignment for Plasmonic Control of Gold Nanorods Coated with Iron Oxide Nanoparticles

Plasmonic nanoparticles that can be manipulated with magnetic fields are of interest for advanced optical applications, diagnostics, imaging, and therapy. Alignment of gold nanorods yields strong polarization-dependent extinction, and use of magnetic fields is appealing because they act through space and can be quickly switched. In this work, cationic polyethyleneimine-functionalized superparamagnetic Fe₃ O₄ nanoparticles (NPs) are deposited on the surface of anionic gold nanorods coated with bovine serum albumin. The magnetic gold nanorods (MagGNRs) obtained through mixing maintain the distinct optical properties of plasmonic gold nanorods that are minimally perturbed by the magnetic overcoating. Magnetic alignment of the MagGNRs arising from magnetic dipolar interactions on the anisotropic gold nanorod core is comprehensively characterized, including structural characterization and enhancement (suppression) of the longitudinal surface plasmon resonance and suppression (enhancement) of the transverse surface plasmon resonance for light polarized parallel (orthogonal) to the magnetic field. The MagGNRs can also be driven in rotating magnetic fields to rotate at frequencies of at least 17 Hz. For suitably large gold nanorods (148 nm long) and Fe₃ O₄ NPs (13.4 nm diameter), significant alignment is possible even in modest (<500 Oe) magnetic fields. An analytical model provides a unified understanding of the magnetic alignment of MagGNRs.

Photothermal Nanozymatic Nanoparticles Induce Ferroptosis and Apoptosis through Tumor Microenvironment Manipulation for Cancer Therapy

It is highly desirable to design a single modality that can simultaneously trigger apoptosis and ferroptosis to efficiently eliminate tumor progression. Herein, a nanosystem based on the intrinsic properties of tumor microenvironment (TME) is designed to achieve tumor control through the simultaneous induction of ferroptosis and apoptosis. CuCP molecules are encapsulated in a liposome-based nanosystem to assemble into biocompatible and stable CuCP nanoparticles (CuCP Lipo NPs). This nanosystem intrinsically possesses nanozymatic activity and photothermal characteristics due to the property of Cu atoms and the structure of CuCP Lipo NPs. It is demonstrated that the synergistic strategy increases the intracellular lipid-reactive oxides species, induces the occurrence of ferroptosis and apoptosis, and completely eradicates the tumors in vivo. Proteomics analysis further discloses the key involved proteins (including Tp53, HMOX1, Ptgs2, Tfrc, Slc11a2, Mgst2, Sod1, and several GST family members) and pathways (including apoptosis, ferroptosis, and ROS synthesis). Conclusively, this work develops a strategy based on one nanosystem to synergistically induce ferroptosis and apoptosis in vivo for tumor suppression, which holds great potential in the clinical translation for tumor therapy.

Self-Powered Smart Gloves Based on Triboelectric Nanogenerators

The hands are used in all facets of daily life, from simple tasks such as grasping and holding to complex tasks such as communication and using technology. Finding a way to not only monitor hand movements and gestures but also to integrate that data with technology is thus a worthwhile task. Gesture recognition is particularly important for those who rely on sign language to communicate, but the limitations of current vision-based and sensor-based methods, including lack of portability, bulkiness, low sensitivity, highly expensive, and need for external power sources, among many others, make them impractical for daily use. To resolve these issues, smart gloves can be created using a triboelectric nanogenerator (TENG), a self-powered technology that functions based on the triboelectric effect and electrostatic induction and is also cheap to manufacture, small in size, lightweight, and highly flexible in terms of materials and design. In this review, an overview of the existing self-powered smart gloves will be provided based on TENGs, both for gesture recognition and human-machine interface, concluding with a discussion on the future outlook of these devices.

Biomimetic nanoparticles directly remodel immunosuppressive microenvironment for boosting glioblastoma immunotherapy

Glioblastoma (GBM), as a very aggressive cancer of central nervous system, is very challenging to completely cure by the conventional combination of surgical resection with radiotherapy and chemotherapy. The success of emerging immunotherapy in hot tumors has attracted considerable interest for the treatment of GBM, but the unique tumor immunosuppressive microenvironment (TIME) of GBM leads to the failure of immunotherapy. Here, we show the significant improvement of the immunotherapy efficacy of GBM by modulating the TIME through novel all-in-one biomimetic nanoparticles (i.e. CS-I/J@CM NPs). The nanoparticles consist of utrasmall Cu_2-x Se nanoparticles (NPs) with outstanding intrinsic properties (e.g., photo-responsive Fenton-like catalytic property for inducing immunogenic cell death (ICD) and alleviating the hypoxia of tumor), indoximod (IND, an inhibitor of indoleamine-2,3-dioxygenease in tumor), JQ1 (an inhibitor for reducing the expression of PD-L1 by tumor cells), and tumor cell membrane for improving the targeting capability and accumulation of nanoparticles in tumor. We reveal that these smart CS-I/J@CM NPs could drastically activate the immune responses through remodeling TIME of GBM by multiple functions. They could (1) increase M1-phenotype macrophages at tumor site by promoting the polarization of tumor-associated macrophages through the reactive oxygen species (ROS) and oxygen generated from the Fenton-like reaction between nanoparticles and H₂O₂ within tumor under NIR II irradiation; (2) decrease the infiltration of Tregs cells at tumor site through the release of IND; (3) decrease the expression of PD-L1 on tumor cells through JQ1. The notable increments of anti-tumor CD8⁺T cells in the tumor and memory T cells (T_EM) in the spleen show excellent therapy efficacy and effectively prevent the recurrence of GBM after modulation of the TIME. This work demonstrates the modulation of TIME could be a significant strategy to improve the immunotherapy of GBM and other cold tumors.

Engineered Bacterial Outer Membrane Vesicles as Controllable Two-Way Adaptors to Activate Macrophage Phagocytosis for Improved Tumor Immunotherapy

The most immune cells infiltrating tumor microenvironment (TME), tumor-associated macrophages (TAMs) closely resemble immunosuppressive M2-polarized macrophages. Moreover, tumor cells exhibit high expression of CD47 "don't eat me" signal, which obstructs macrophage phagocytosis. The precise and efficient activation of TAMs is a promising approach to tumor immunotherapy; however, re-education of macrophages remains a challenge. Bacteria-derived outer membrane vesicles (OMVs) are highly immunogenic nanovesicles that can robustly stimulate macrophages. Here, an OMV-based controllable two-way adaptor is reported, in which a CD47 nanobody (CD47nb) is fused onto OMV surface (OMV-CD47nb), with the outer surface coated with a polyethylene glycol (PEG) layer containing diselenide bonds (PEG/Se) to form PEG/Se@OMV-CD47nb. The PEG/Se layer modification not only mitigates the immunogenicity of OMV-CD47nb, thereby remarkedly increasing the dose that can be administered safely through intravenous injection, but also equips the formulation with radiation-triggered controlled release of OMV-CD47nb. Application of radiation to tumors in mice injected with the nanoformulation results in remodeling of TME. As two-way adaptors, OMV-CD47nb activates TAM phagocytosis of tumor cells via multiple pathways, including induction of M1 polarization and blockade of "don't eat me" signal. Moreover, this activation of TAMs results in the stimulation of T cell-mediated antitumor immunity through effective antigen presentation.

SmMnO3-decorated ZnO in a hexane-water interface for enhancing visible light-driven photocatalytic degradation of malachite green

Malachite green (MG) contributes to water contamination because its accumulation adversely impacts aquatic systems. For the first time, we prepare a high photoresponse of ZnO/SmMnO₃ heterojunction via a high-speed stirring method at the nonpolar-polar interface assisted by Alstonia scholaris leaves extract (ASLE) as natural hydrolyzing and stabilizing agents. The heterojunction formation boosts the photocatalytic activity of ZnO up to 91.74% under visible light irradiation. Photoluminescence analysis confirmed that modification with SmMnO₃ increases the separation of photogenerated charges and plummets the recombination rates of electron-holes, which induces high photodegradation of MG. With 3 mg of catalyst, the %TOC removal efficiency for MG degradation over ZnO/SmMnO₃ was found to be 53.09%, which is higher than that over ZnO. The kinetics model for the photocatalytic reaction was a pseudo-first-order with excellent stability in four consecutive cycles with no structural change. The radical trapping experiment suggests that h⁺ was the major species in the MG photodegradation reaction. Additionally, morphology and elemental analyses clearly present the formation of ZnO/SmMnO₃ heterojunction without any impurities. The current research demonstrates a simple and advanced technique to design heterojunction photocatalyst at the interface of hexane-water.

Perovskite Wide-Angle Field-Of-View Camera

Researchers have attempted to create wide-angle field-of-view (FOV) cameras inspired by the structure of the eyes of animals, including fisheye and compound eye cameras. However, realizing wide-angle FOV cameras simultaneously exhibiting low distortion and high spatial resolution remains a significant challenge. In this study, a novel wide-angle FOV camera is developed by combining a single large-area flexible perovskite photodetector (FP-PD) using computational technology. With this camera, the proposed single-photodetector imaging technique can obtain high-spatial-resolution images using only a single detector, and the large-area FP-PD can be bent further to collect light from a wide-angle FOV. The proposed camera demonstrates remarkable features of an extraordinarily tunable wide FOV (greater than 150°), high spatial resolution of 256 × 256 pixels, and low distortion. It is believed that the proposed compatible and extensible camera prototype will promote the development of high-performance versatile FOV cameras.

The role of imaging in targeted delivery of nanomedicine for cancer therapy

Nanomedicines overcome the pharmacokinetic limitations of traditional drug formulations and have promising prospect in cancer treatment. However, nanomedicine delivery in vivo is still facing challenges from the complex physiological environment. For the purpose of effective tumor therapy, they should be designed to guarantee the five features principle, including long blood circulation, efficient tumor accumulation, deep matrix penetration, enhanced cell internalization and accurate drug release. To ensure the excellent performance of the designed nanomedicine, it would be better to monitor the drug delivery process as well as the therapeutic effects by real-time imaging. In this review, we summarize strategies in developing nanomedicines for efficiently meeting the five features of drug delivery, and the role of several imaging modalities (fluorescent imaging (FL), magnetic resonance imaging (MRI), computed tomography (CT), photoacoustic imaging (PAI), positron emission tomography (PET), and electron microscopy) in tracing drug delivery and therapeutic effect in vivo based on five features principle.

Ultralow-Power and Radiation-Tolerant Complementary Metal-Oxide-Semiconductor Electronics Utilizing Enhancement-Mode Carbon Nanotube Transistors on Paper Substrates

The development of eco-friendly, ultralow-power and easy-to-process electronics is facing dominant challenges in emerging off-the-grid applications, such as the Internet of Things (IoTs) and extreme environment explorations at the south/north pole, in the deep sea, and in outer space. Eco-friendly, biodegradable, lightweight, and flexible paper-based electronics can provide many new possibilities for next-generation devices and circuits. Here, enhancement-mode (E-mode, remaining off state at zero gate voltages) carbon nanotube (CNT) complementary metal-oxide-semiconductor (CMOS) thin-film transistors (TFTs) are built on paper substrates through a printing-based process. Benefitting from the CMOS circuit style and E-mode transistors, the fabricated CMOS inverters exhibit high voltage gains (more than 11) and noise margins (up to 75% 1/2 V_DD at V_DD of 0.4 V), and rail-to-rail operation down to a V_DD as low as 0.2 V and record low power dissipation as low as 0.0124 pW μm^-1 . Furthermore, the transistors and integrated circuits (ICs) show an excellent radiation tolerance of a total ionizing dose (TID) exceeding 2 Mrad with a high dose rate of 365 rad s^-1 . The record power consumption and outstanding radiation tolerance behavior achieved in paper-based and easy-to-process CNT electronics are attractive for emerging energy-saving and environmentally friendly ICs in harsh environment (such as outer-space) applications.

New Deferric Amine Compounds Efficiently Chelate Excess Iron to Treat Iron Overload Disorders and to Prevent Ferroptosis

Excess iron accumulation occurs in organs of patients with certain genetic disorders or after repeated transfusions. No physiological mechanism is available to excrete excess iron and iron overload to promote lipid peroxidation to induce ferroptosis, thus iron chelation becomes critical for preventing ion toxicity in these patients. To date, several iron chelators have been approved for iron chelation therapy, such as deferiprone and deferoxamine, but the current iron chelators suffer from significant limitations. In this context, new agents are continuously sought. Here, a library of new deferric amine compounds (DFAs) with adjustable skeleton and flexibility is synthesized by adopting the beneficial properties of conventional chelators. After careful evaluations, compound DFA1 is found to have greater efficacy in binding iron through two molecular oxygens in the phenolic hydroxyl group and the nitrogen atom in the amine with a 2:1 stoichiometry. This compound remarkably ameliorates iron overload in diverse murine models through both oral and intravenous administration, including hemochromatosis, high iron diet-induced, and iron dextran-stimulated iron accumulation. Strikingly, this compound is found to suppress iron-induced ferroptosis by modulating the intracellular signaling that drives lipid peroxidation. This study opens a new approach for the development of iron chelators to treat iron overload.

LNP-mediated delivery of CRISPR RNP for wide-spread in vivo genome editing in mouse cornea

CRISPR/Cas9-based genome-editing therapies are poised to change the clinical outcome for many diseases with validated therapeutic targets awaiting an appropriate delivery system. Recent advances in lipid nanoparticle (LNP) technology make them an attractive platform for the delivery of various forms of CRISPR/Cas9, including the efficient and transient Cas9/gRNA ribonucleoprotein (RNP) complexes. In this study, we initially tested our novel LNP platform by delivering pre-complexed RNPs and template DNA to cultured mouse cortical neurons, and obtained successful ex vivo genome editing. We then directly injected LNP-packaged RNPs and DNA template into the mouse cornea to evaluate in vivo delivery. For the first time, we demonstrated wide-spread genome editing in the cornea using our LNP-RNPs. The ability of our LNPs to transfect the cornea highlights the potential of our novel delivery platform to be used in CRISPR/Cas9-based genome editing therapies of corneal diseases.

Nanodiamond-Quantum Sensors Reveal Temperature Variation Associated to Hippocampal Neurons Firing

Temperature is one of the most relevant parameters for the regulation of intracellular processes. Measuring localized subcellular temperature gradients is fundamental for a deeper understanding of cell function, such as the genesis of action potentials, and cell metabolism. Notwithstanding several proposed techniques, at the moment detection of temperature fluctuations at the subcellular level still represents an ongoing challenge. Here, for the first time, temperature variations (1 °C) associated with potentiation and inhibition of neuronal firing is detected, by exploiting a nanoscale thermometer based on optically detected magnetic resonance in nanodiamonds. The results demonstrate that nitrogen-vacancy centers in nanodiamonds provide a tool for assessing various levels of neuronal spiking activity, since they are suitable for monitoring different temperature variations, respectively, associated with the spontaneous firing of hippocampal neurons, the disinhibition of GABAergic transmission and the silencing of the network. Conjugated with the high sensitivity of this technique (in perspective sensitive to < 0.1 °C variations), nanodiamonds pave the way to a systematic study of the generation of localized temperature gradients under physiological and pathological conditions. Furthermore, they prompt further studies explaining in detail the physiological mechanism originating this effect.

Genetically Engineered Hematopoietic Stem Cells Deliver TGF-β Inhibitor to Enhance Bone Metastases Immunotherapy

Owing to the immune microenvironment of bones and low selectivity of the drug, patients with bone metastases often respond poorly to immunotherapy. In this study, programmed cell death protein 1 (PD1)-expressing hematopoietic stem cells (HSCs) are genetically engineered for bone-targeted delivery of the transforming growth factor beta (TGF-β) small-molecule inhibitor SB-505124 (SB@HSCs-PD-1). Intriguingly, compared to anti-PD-L1 monoclonal antibodies, as "living drugs", HSCs-PD-1 not only show great targeting ability to the bone marrow, but are also able to reduplicate themselves within the bone marrow niche and continuously express PD-1 molecules. The SB released from HSCs-PD-1 competitively bound to TGF-β receptors on CD4+ T cells and facilitate CD4+ T cell differentiation to helper T (TH )1 and TH 2 cells, thereby reprogramming the local immunosuppressive milieu of the bone marrow. Additionally, HSCs-PD-1 can block programmed death-ligand 1 on tumor and myeloid cells, resulting in reinvigorated anti-tumor immunity of T cells. In conclusion, in the present study, an alternative cell engineering strategy is delineated for immune checkpoint blockade therapy, to target bone metastasis using HSCs as a platform, which shows great promise in the treatment of bone metastases.

Direct observation of geometric and sliding ferroelectricity in an amphidynamic crystal

Sliding ferroelectricity is a recently observed polarity existing in two-dimensional materials. However, due to the weak polarization and poor electrical insulation in these materials, existing experimental evidences are indirect and mostly based on nanoscale transport properties or piezoresponse force microscopy. We report the direct observation of sliding ferroelectricity, using a high-quality amphidynamic single crystal (15-crown-5)Cd₃Cl₆, which possesses a large bandgap and so allows direct measurement of polarization-electric field hysteresis. This coordination polymer is a van der Waals material, which is composed of inorganic stators and organic rotators as determined by X-ray diffraction and NMR characterization. From density functional theory calculations, we find that after freezing the rotators, an electric dipole is generated in each layer driven by the geometric mechanism, while a comparable ferroelectric polarization originates from the interlayer sliding. The net polarization of these two components can be directly measured and manipulated. Our finding provides insight into low-dimensional ferroelectrics, especially control of the synchronous dynamics of rotating molecules and sliding layers in solids.

Spectral computed tomography with inorganic nanomaterials: State-of-the-art

Recently, spectral computed tomography (CT) technology has received great interest in the field of radiology. Spectral CT imaging utilizes the distinct, energy-dependent X-ray absorption properties of substances in order to provide additional imaging information. Dual-energy CT and multi-energy CT (Spectral CT) are capable of constructing monochromatic energy images, material separation images, energy spectrum curves, constructing effective atomic number maps, and more. However, poor contrast, due to neighboring X-ray attenuation of organs and tissues, is still a challenge to spectral CT. Hence, contrast agents (CAs) are applied for better differentiation of a given region of interest (ROI). Currently, many different kinds of inorganic nanoparticulate CAs for spectral CT have been developed due to the limitations of clinical iodine (I)-based contrast media, leading to the conclusion that inorganic nanomedicine applied to spectral CT will be a powerful collaboration both in basic research and in clinics. In this review, the underlying principles and types of spectral CT techniques are discussed, and some evolving clinical diagnosis applications of spectral CT techniques are introduced. In particular, recent developments in inorganic CAs used for spectral CT are summarized. Finally, the challenges and future developments of inorganic nanomedicine in spectral CT are briefly discussed.

50C Fast-Charge Li-Ion Batteries using a Graphite Anode

Li-ion batteries have made inroads into the electric vehicle market with high energy densities, yet they still suffer from slow kinetics limited by the graphite anode. Here, electrolytes enabling extreme fast charging (XFC) of a microsized graphite anode without Li plating are designed. Comprehensive characterization and simulations on the diffusion of Li⁺ in the bulk electrolyte, charge-transfer process, and the solid electrolyte interphase (SEI) demonstrate that high ionic conductivity, low desolvation energy of Li⁺ , and protective SEI are essential for XFC. Based on the criterion, two fast-charging electrolytes are designed: low-voltage 1.8 m LiFSI in 1,3-dioxolane (for LiFePO₄ ||graphite cells) and high-voltage 1.0 m LiPF₆ in a mixture of 4-fluoroethylene carbonate and acetonitrile (7:3 by vol) (for LiNi_0.8 Co_0.1 Mn_0.1 O₂ ||graphite cells). The former electrolyte enables the graphite electrode to achieve 180 mAh g^-1 at 50C (1C = 370 mAh g^-1 ), which is 10 times higher than that of a conventional electrolyte. The latter electrolyte enables LiNi_0.8 Co_0.1 Mn_0.1 O₂ ||graphite cells (2 mAh cm^-2 , N/P ratio = 1) to provide a record-breaking reversible capacity of 170 mAh g^-1 at 4C charge and 0.3C discharge. This work unveils the key mechanisms for XFC and provides instructive electrolyte design principles for practical fast-charging LIBs with graphite anodes.

A ROS-Responsive Liposomal Composite Hydrogel Integrating Improved Mitochondrial Function and Pro-Angiogenesis for Efficient Treatment of Myocardial Infarction

Mitochondrial dysfunction of cardiomyocytes (CMs) has been identified as a significant pathogenesis of early myocardial infarction (MI). However, only a few agents or strategies have been developed to improve mitochondrial dysfunction for the effective MI treatment. Herein, a reactive oxygen species (ROS)-responsive PAMB-G-TK/4-arm-PEG-SG hydrogel is developed for localized drug-loaded liposome delivery. Notably, the liposomes contain both elamipretide (SS-31) and sphingosine-1-phosphate (S1P), where SS-31 acts as an inhibitor of mitochondrial oxidative damage and S1P as a signaling molecule for activating angiogenesis. Liposome-encapsulated PAMB-G-TK/4-arm-PEG-SG hydrogels demonstrate myocardium-like mechanical strength and electrical conductivity, and ROS-sensitive release of SS-31 and S1P-loaded liposomes. Further liposomal release of SS-31, which can target cytochrome c in the mitochondrial inner membrane of damaged CMs, inhibits pathological ROS production, improving mitochondrial dysfunction. Meanwhile, S1P released from the liposome induces endothelial cell angiogenesis by activating the S1PR1/PI3K/Akt pathway. In a rat MI model, the resulting liposomal composite hydrogel improves cardiac function by scavenging excess ROS, improving mitochondrial dysfunction, and promoting angiogenesis. This study reports for the first time a liposomal composite hydrogel that can directly target mitochondria of damaged CMs for a feedback-regulated release of encapsulated liposomes to consume the overproduced pathological ROS for improved CM activity and enhanced MI treatment.

Recent advances in self-powered and flexible UVC photodetectors

Ultraviolet-C (UVC) radiation is employed in various applications, including irreplaceable applications in military and civil fields, such as missile guidance, flame detection, partial discharge detection, disinfection, and wireless communication. Although most modern electronics are based on Si, UVC detection technology remains a unique exception because the short wavelength of UV radiation makes efficient detection with Si difficult. In this review, recent challenges in obtaining ideal UVC photodetectors with various materials and various forms are introduced. An ideal photodetector must satisfy the following requirements: high sensitivity, fast response speed, high on/off photocurrent ratio, good regional selectivity, outstanding reproducibility, and superior thermal and photo stabilities. UVC detection is still in its infancy compared to the detection of UVA as well as other photon spectra, and recent research has focused on different key components, including the configuration, material, and substrate, to acquire battery-free, super-sensitive, ultra-stable, ultra-small, and portable UVC photodetectors. We introduce and discuss the strategies for fabricating self-powered UVC photodetectors on flexible substrates in terms of the structure, material, and direction of incoming radiation. We also explain the physical mechanisms of self-powered devices with various architectures. Finally, we present a brief outlook that discusses the challenges and future strategies for deep-UVC photodetectors.

Hitherto Unknown Solvent and Anion Pairs in Solvation Structures Reveal New Insights into High-Performance Lithium-Ion Batteries

Solvent-solvent and solvent-anion pairings in battery electrolytes have been identified for the first time by nuclear magnetic resonance spectroscopy. These hitherto unknown interactions are enabled by the hydrogen bonding induced by the strong Lewis acid Li⁺ , and exist between the electron-deficient hydrogen (δ⁺ H) present in the solvent molecules and either other solvent molecules or negatively-charged anions. Complementary with the well-established strong but short-ranged Coulombic interactions between cation and solvent molecules, such weaker but longer-ranged hydrogen-bonding casts the formation of an extended liquid structure in electrolytes that is influenced by their components (solvents, additives, salts, and concentration), which in turn dictates the ion transport within bulk electrolytes and across the electrolyte-electrode interfaces. The discovery of this new inter-component force completes the picture of how electrolyte components interact and arrange themselves, sets the foundation to design better electrolytes on the fundamental level, and probes battery performances.

Necklace-Like Nanostructures: From Fabrication, Properties to Applications

The shape-controlled synthesis of nanocrystals remains a hot research topic in nanotechnology. Particularly, the fabrication of 1D structures such as wires, rods, belts, and tubes has been an interesting and important subject within nanoscience in the last few decades. 1D necklace-like micro/nanostructures are a sophisticated geometry that has attracted increasing attention due to their anisotropic and periodic structure, intrinsic high surface area, abundant transport channels, exposure of each component to the surface, and multiscale roughness of the surface. These characteristics enable their unique electrical, optical, and catalytic properties. This review provides a comprehensive summary of the advanced research progress on the fabrication strategies, novel properties, and various applications of necklace-like structures. It begins with the main fabrication methods of necklace-like structures and subsequently details a variety of their properties and applications. It concludes with the authors' perspectives on future research and development of the necklace-like structures.