Biomaterials-based electronics: polymers and interfaces for biology and medicine

In-Vivo Validation of Fully Implantable Multi-Panel Devices for Remote Monitoring of Metabolism

This paper presents the in-vivo tests on a Fully Implantable Multi-Panel Devices for Remote Monitoring of endogenous and exogenous analytes. To investigate issues on biocompatibility, three different covers have been designed, realized and tested in mice for 30 days. ATP and neutrophil concentrations have been measured, at the implant site after the device was explanted, to assess the level of biocompatibility of the device. Finally, fully working prototypes of the device were implanted in mice and tested. The implanted devices were used to detect variations in the physiological concentrations of glucose and paracetamol. Data trends on these analytes have been successfully acquired and transmitted to the external base station. Glucose and paracetamol (also named acetaminophen) have been proposed in this research as model molecules for applications to personalized and translational medicine.

Biosynthetic Polymers as Functional Materials

The synthesis of functional polymers encoded with biomolecules has been an extensive area of research for decades. As such, a diverse toolbox of polymerization techniques and bioconjugation methods has been developed. The greatest impact of this work has been in biomedicine and biotechnology, where fully synthetic and naturally derived biomolecules are used cooperatively. Despite significant improvements in biocompatible and functionally diverse polymers, our success in the field is constrained by recognized limitations in polymer architecture control, structural dynamics, and biostabilization. This Perspective discusses the current status of functional biosynthetic polymers and highlights innovative strategies reported within the past five years that have made great strides in overcoming the aforementioned barriers.

Silk Fibroin for Flexible Electronic Devices

Flexible electronic devices are necessary for applications involving unconventional interfaces, such as soft and curved biological systems, in which traditional silicon-based electronics would confront a mechanical mismatch. Biological polymers offer new opportunities for flexible electronic devices by virtue of their biocompatibility, environmental benignity, and sustainability, as well as low cost. As an intriguing and abundant biomaterial, silk offers exquisite mechanical, optical, and electrical properties that are advantageous toward the development of next-generation biocompatible electronic devices. The utilization of silk fibroin is emphasized as both passive and active components in flexible electronic devices. The employment of biocompatible and biosustainable silk materials revolutionizes state-of-the-art electronic devices and systems that currently rely on conventional semiconductor technologies. Advances in silk-based electronic devices would open new avenues for employing biomaterials in the design and integration of high-performance biointegrated electronics for future applications in consumer electronics, computing technologies, and biomedical diagnosis, as well as human-machine interfaces.

Photolithographic Micropatterning of Conducting Polymers on Flexible Silk Matrices

High-resolution micropatterning of a

PEDOT

PSS conducting-polymer-silksericin composite is presented using a water-based, benchtop photolithographic process. Conducting microstructures formed on a flexible silk fibroin sheet allow a fully organic, flexible bioelectronic device. Large-area microfabricated devices such as biosensors that are biocompatible and degradable over a controlled period of time can be formed.

Tailoring Functional Interlayers in Organic Field-Effect Transistor Biosensors

This review aims to provide an update on the development involving dielectric/organic semiconductor (OSC) interfaces for the realization of biofunctional organic field-effect transistors (OFETs). Specific focus is given on biointerfaces and recent technological approaches where biological materials serve as interlayers in back-gated OFETs for biosensing applications. Initially, to better understand the effects produced by the presence of biomolecules deposited at the dielectric/OSC interfacial region, the tuning of the dielectric surface properties by means of self-assembled monolayers is discussed. Afterward, emphasis is given to the modification of solid-state dielectric surfaces, in particular inorganic dielectrics, with biological molecules such as peptides and proteins. Special attention is paid on how the presence of an interlayer of biomolecules and bioreceptors underneath the OSC impacts on the charge transport and sensing performance of the device. Moreover, naturally occurring materials, such as carbohydrates and DNA, used directly as bulk gating materials in OFETs are reviewed. The role of metal contact/OSC interface in the overall performance of OFET-based sensors is also discussed.

Imparting electroactivity to polycaprolactone fibers with heparin-doped polypyrrole: Modulation of hemocompatibility and inflammatory responses

Hemocompatibility, anti-inflammation and anti-thrombogenicity of acellular synthetic vascular grafts remains a challenge in biomaterials design. Using electrospun polycaprolactone (PCL) fibers as a template, a coating of polypyrrole (PPy) was successfully polymerized onto the fiber surface. The fibers coated with heparin-doped PPy (PPy-HEP) demonstrated better electroactivity, lower surface resistivity (9-10-fold) and better anti-coagulation response (non-observable plasma recalcification after 30min vs. recalcification at 8-9min) as compared to fibers coated with pristine PPy. Red blood cell compatibility, measured by% hemolysis, was greatly improved on PPy-HEP-coated PCL in comparison to uncoated PCL (3.9±2.1% vs. 22.1±4.1%). PPy-HEP-coated PCL fibers also exhibited higher stiffness values (6.8±0.9MPa vs. 4.2±0.8MPa) as compared to PCL fibers, but similar tensile strengths. It was also observed that the application of a low alternating current led to a 4-fold reduction of platelet activation (as quantitated by CD62p expression) for the PPy-HEP-coated fibers as compared to non-stimulated conditions. In parallel, a reduction in the leukocyte adhesion to both pristine PPy-coated and PPy-HEP-coated fibers was observable with AC stimulation. Overall, a new strategy involving the use of hemocompatible conducting polymers and electrical stimulation to control thrombogenicity and inflammatory responses for synthetic vascular graft designs was demonstrated.

Electrical Stimulation of Human Mesenchymal Stem Cells on Conductive Nanofibers Enhances their Differentiation toward Osteogenic Outcomes

Tissue scaffolds allowing the behavior of the cells that reside within them to be controlled are of particular interest for tissue engineering. Herein, the preparation of conductive fiber-based bone tissue scaffolds (nonwoven mats of electrospun polycaprolactone with an interpenetrating network of polypyrrole and polystyrenesulfonate) is described that enable the electrical stimulation of human mesenchymal stem cells to enhance their differentiation toward osteogenic outcomes.

Instructive Conductive 3D Silk Foam-Based Bone Tissue Scaffolds Enable Electrical Stimulation of Stem Cells for Enhanced Osteogenic Differentiation

Stimuli-responsive materials enabling the behavior of the cells that reside within them to be controlled are vital for the development of instructive tissue scaffolds for tissue engineering. Herein, we describe the preparation of conductive silk foam-based bone tissue scaffolds that enable the electrical stimulation of human mesenchymal stem cells (HMSCs) to enhance their differentiation toward osteogenic outcomes.

Organic bioelectronics in infection

Organic bioelectronics is a rapidly growing field of both academic and industrial interest. Specific attributes make this class of materials particularly interesting for biomedical and medical applications, and a whole new class of biologically compatible devices is being created owing to structural and functional similarities to biological systems. In parallel, modern advances in biomedical research call for dynamically controllable systems. In infection biology, a progressing bacterial infection can be studied dynamically, at much higher resolution and on a smaller spatial scale than ever before, and it is now understood that minute changes in the tissue microenvironment play pivotal roles in the outcome of infections. This review merges the fields of infection biology and organic bioelectronics, describing the ability of conducting polymer devices to sense, modify, and interact with the infected tissue microenvironment. Though the primary focus is from the perspective of bacterial infections, general examples from cell biology and regenerative medicine are included where relevant. Spatially and temporally controlled biomimetic in vitro systems will greatly aid our molecular understanding of the infection process, thereby providing exciting opportunities for organic bioelectronics in future diagnosis and treatment of infectious diseases.

Rational design and applications of conducting polymer hydrogels as electrochemical biosensors

Conducting polymer hydrogels (CPHs) are conducting polymer-based materials that contain high water content and have physical properties, resembling the extracellular environment. Synergizing the advantages of both the organic conductors and hydrogels, CPHs emerged to be candidates for high performance biosensors by providing advantageous interfaces for electrochemical bio-electrodes. Examples include the following: (1) the interface between a biomaterial and an artificial inorganic electrode material; (2) the hybrid electronic interface between an ionic carrier and an electron charge carrier; and (3) the extension of the planar electrode surface to a three-dimensional (3D) porous surface. CPHs with rationally designed 3D nanostructures and molecular structures are advantageous for enhancing the biocompatibility of the electrode, improving enzyme immobilization, creating protective layers to control diffusion, and wiring the electron transference. This review presents a brief overview of the current state-of-the-art research in electrochemical biosensors based on CPHs and describes future directions.

Multiphoton microfabrication of conducting polymer-based biomaterials

Multiphoton microfabrication was used to prepare CP-based materials for drug delivery and stimulating tissues.

The study of polythiophene/water interfaces by sum-frequency generation spectroscopy and molecular dynamics simulations

Polythiophene/water interfaces are investigated by sum frequency generation spectroscopy and molecular dynamics simulations, showing a preferential edge-on molecular orientation.

Electrical stimulation of human mesenchymal stem cells on biomineralized conducting polymers enhances their differentiation towards osteogenic outcomes

Tissue scaffolds allowing the behaviour of the cells that reside on them to be controlled are of particular interest for tissue engineering.

Supplementing π-systems: eumelanin and graphene-like integration towards highly conductive materials for the mammalian cell culture bio-interface

Eumelanin and graphene-like integration towards a competitive exploitation in the materials science of the melanic human pigment.

Biocompatible ionic liquid-biopolymer electrolyte-enabled thin and compact magnesium-air batteries

With the surge of interest in miniaturized implanted medical devices (IMDs), implantable power sources with small dimensions and biocompatibility are in high demand. Implanted battery/supercapacitor devices are commonly packaged within a case that occupies a large volume, making miniaturization difficult. In this study, we demonstrate a polymer electrolyte-enabled biocompatible magnesium-air battery device with a total thickness of approximately 300 μm. It consists of a biocompatible polypyrrole-para(toluene sulfonic acid) cathode and a bioresorbable magnesium alloy anode. The biocompatible electrolyte used is made of choline nitrate (ionic liquid) embedded in a biopolymer, chitosan. This polymer electrolyte is mechanically robust and offers a high ionic conductivity of 8.9 × 10(-3) S cm(-1). The assembled battery delivers a maximum volumetric power density of 3.9 W L(-1), which is sufficient to drive some types of IMDs, such as cardiac pacemakers or biomonitoring systems. This miniaturized, biocompatible magnesium-air battery may pave the way to a future generation of implantable power sources.

Highly conductive stretchable and biocompatible electrode-hydrogel hybrids for advanced tissue engineering

Hydrogel-based, molecular permeable electronic devices are considered to be promising for electrical stimulation and recording of living tissues, either in vivo or in vitro. This study reports the fabrication of the first hydrogel-based devices that remain highly electrically conductive under substantial stretch and bending. Using a simple technique involving a combination of chemical polymerization and electropolymerization of poly (3,4-ethylenedioxythiophene) (PEDOT), a tight bonding of a conductive composite of PEDOT and polyurethane (PU) to an elastic double-network hydrogel is achieved to make fully organic PEDOT/PU-hydrogel hybrids. Their response to repeated bending, mechanical stretching, hydration-dessication cycles, storage in aqueous condition for up to 6 months, and autoclaving is assessed, demonstrating excellent stability, without any mechanical or electrical damage. The hybrids exhibit a high electrical conductivity of up to 120 S cm(-1) at 100% elongation. The adhesion, proliferation, and differentiation of neural and muscle cells cultured on these hybrids are demonstrated, as well as the fabrication of 3D hybrids, advancing the field of tissue engineering with integrated electronics.

Nanotechnology: an effective tool for enhancing bioavailability and bioactivity of phytomedicine

To achieve the desired therapeutic objective, the drug product must deliver the active drug at an optimal rate and amount. By proper biopharmaceutic design, the rate and extent of drug absorption (also called as bioavailability) or the systemic delivery of drugs to the body can be varied from rapid and complete absorption to slow and sustained absorption depending upon the desired therapeutic objective. Phytomedicine have served as the foundation for a larger fraction of the current pharmacopeia. But the delivery of phytomedicine is always problematic due to poor aqueous solubility, poor permeation, low systemic availability, instability and extensive first pass metabolism. Current review will discuss in detail about how nanotechnology can enhance the bioavilability and bioactivity of the phytomedicine.

Biodegradable nanofibrous polymeric substrates for generating elastic and flexible electronics

Biodegradable nanofibrous polymeric substrates are used to fabricate suturable, elastic, and flexible electronics and sensors. The fibrous microstructure of the substrate makes it permeable to gas and liquid and facilitates the patterning process. As a proof-of-principle, temperature and strain sensors are fabricated on this elastic substrate and tested in vitro. The proposed system can be implemented in the field of bioresorbable electronics and the emerging area of smart wound dressings.

A nanostructured conductive bio-composite of silk fibroin-single walled carbon nanotubes

Silk fibroin (SF), a protein core fibre from the silkworm Bombyx mori, has huge potential to become a sustainable, biocompatible, and biodegradable material platform that can pave the way towards the replacement of plastic in the fabrication of bio-derived materials for a variety of technological and biomedical applications. SF has remarkable mechanical flexibility, controllable biodegradability, biocompatibility and is capable of drug/doping inclusion, stabilization and release. However, the dielectric properties of SF limit its potential as a direct bioelectronic interface in biomedical devices intended to control the bioelectrical activity of the cell for regenerative purposes. In this work, a novel wet templating method is proposed to generate nanostructured, conductive Silk Fibroin (SF) composite films. We combine the unusual properties of SF, such as its mechanical properties, its convenience and biocompatibility with the electrical conductivity and stiffness of Single Walled Carbon Nanotubes (SWCNTs). The presented SF-SWCNT composite displays a periodic architecture where SWCNTs are regularly and homogeneously distributed in the SF protein matrix. The morphological and chemo-physical properties of the nanocomposite are analysed and defined by SEM, Raman Spectroscopy, ATR-IR, UFM and contact angle analyses. Notably, the SF-SWCNT composite film is conductive, showing additional functionality compared to the dielectric properties of the bare SF film. Finally, SF-SWCNT is biocompatible and enables the growth of primary rat Dorsal Root Ganglion (DRG) neurons. Collectively our results demonstrate that the nanostructured, conductive, robust and biocompatible SF-SWCNT composite can be fabricated using a wet templating method, paving the way towards the fabrication and development of silk-based electronic devices for use in bioelectronic and biomedical applications.

Biodegradable electroactive polymers for electrochemically-triggered drug delivery

We report biodegradable electroactive polymer (EAP)-based materials and their application as drug delivery devices.

Implementing tissue engineering and regenerative medicine solutions in medical implants

BACKGROUND

Surgical implants are widely used in the medical field but their long-term performance is limited due to failure of integration with tissues. This manuscript describes very well-known problems associated with implants and discusses novel solutions used in tissue engineering and regenerative medicine that can be implemented in this uncommonly discussed medical area.

SOURCES OF DATA

General and medical literature describing modifications of medical and surgical implants, biofunctionalization, tissue engineering and regenerative medicine.

AREAS OF AGREEMENT

Procedures for surgical implantation have grown substantially in the last few decades and provided improved quality of life for patients, regardless of area of implantation and device type and purpose.

AREAS OF CONTROVERSY

In general, implants fail because of lack of long-term integration with the surrounding tissues. Implant manufacturers have not addressed implant failure from the point of view of biointegration. In addition, some medical practitioners are inclined to treat implant failure by using anti-infection methods to prevent bacterial adhesion. However, both approaches are conceptually limited, as discussed in this manuscript.

GROWING POINTS

Implantation in the future will not be limited to medically needed procedures but also to a growing number of cosmetic body transformation procedures, which may include perceived 'improved implant functions' over natural tissues or organs. An additional trend is that implant procedures are being progressively performed in younger individuals.

AREAS TIMELY FOR DEVELOPING RESEARCH

Current implants generally do not allow the physician to have controlled long-term access to internal tissues in contact with the implants, for example to release specific compounds when medically needed to the problem area.

Biologically derived melanin electrodes in aqueous sodium-ion energy storage devices

Biodegradable electronics represents an attractive and emerging paradigm in medical devices by harnessing simultaneous advantages afforded by electronically active systems and obviating issues with chronic implants. Integrating practical energy sources that are compatible with the envisioned operation of transient devices is an unmet challenge for biodegradable electronics. Although high-performance energy storage systems offer a feasible solution, toxic materials and electrolytes present regulatory hurdles for use in temporary medical devices. Aqueous sodium-ion charge storage devices combined with biocompatible electrodes are ideal components to power next-generation biodegradable electronics. Here, we report the use of biologically derived organic electrodes composed of melanin pigments for use in energy storage devices. Melanins of natural (derived from Sepia officinalis) and synthetic origin are evaluated as anode materials in aqueous sodium-ion storage devices. Na(+)-loaded melanin anodes exhibit specific capacities of 30.4 ± 1.6 mAhg(-1). Full cells composed of natural melanin anodes and λ-MnO2 cathodes exhibit an initial potential of 1.03 ± 0.06 V with a maximum specific capacity of 16.1 ± 0.8 mAhg(-1). Natural melanin anodes exhibit higher specific capacities compared with synthetic melanins due to a combination of beneficial chemical, electrical, and physical properties exhibited by the former. Taken together, these results suggest that melanin pigments may serve as a naturally occurring biologically derived charge storage material to power certain types of medical devices.

25th anniversary article: progress in chemistry and applications of functional indigos for organic electronics

Indigo and its derivatives are dyes and pigments with a long and distinguished history in organic chemistry. Recently, applications of this 'old' structure as a functional organic building block for organic electronics applications have renewed interest in these molecules and their remarkable chemical and physical properties. Natural-origin indigos have been processed in fully bio-compatible field effect transistors, operating with ambipolar mobilities up to 0.5 cm(2) /Vs and air-stability. The synthetic derivative isoindigo has emerged as one of the most successful building-blocks for semiconducting polymers for plastic solar cells with efficiencies > 5%. Another isomer of indigo, epindolidione, has also been shown to be one of the best reported organic transistor materials in terms of mobility (∼2 cm(2) /Vs) and stability. This progress report aims to review very recent applications of indigoids in organic electronics, but especially to logically bridge together the hereto independent research directions on indigo, isoindigo, and other materials inspired by historical dye chemistry: a field which was the root of the development of modern chemistry in the first place.

Drug delivery interfaces in the 21st century: from science fiction ideas to viable technologies

Early science fiction envisioned the future of drug delivery as targeted micrometer-scale submarines and "cyborg" body parts. Here we describe the progression of the field toward technologies that are now beginning to capture aspects of this early vision. Specifically, we focus on the two most prominent types of systems in drug delivery: the intravascular micro/nano drug carriers for delivery to the site of pathology and drug-loaded implantable devices that facilitate release with the predefined kinetics or in response to a specific cue. We discuss the unmet clinical needs that inspire these designs, the physiological factors that pose difficult challenges for their realization, and viable technologies that promise robust solutions. We also offer a perspective on where drug delivery may be in the next 50 years based on expected advances in material engineering and in the context of future diagnostics.

The biological microprocessor, or how to build a computer with biological parts

Systemics, a revolutionary paradigm shift in scientific thinking, with applications in systems biology, and synthetic biology, have led to the idea of using silicon computers and their engineering principles as a blueprint for the engineering of a similar machine made from biological parts. Here we describe these building blocks and how they can be assembled to a general purpose computer system, a biological microprocessor. Such a system consists of biological parts building an input / output device, an arithmetic logic unit, a control unit, memory, and wires (busses) to interconnect these components. A biocomputer can be used to monitor and control a biological system.

Hydrogen-bonds in molecular solids - from biological systems to organic electronics

Hydrogen-bonding (H-bonding) is a relatively strong, highly directional, and specific noncovalent interaction present in many organic molecules, and notably is responsible for supramolecular ordering in biological systems. The H-bonding interactions play a role in many organic electrically conducting materials - in particular in those related to biology, e.g. melanin and indigo. This article aims to highlight recent work on application of nature-inspired H-bonded organic molecules in organic electronic devices. Three topics are covered in this brief review: (1) electrical and ionic conduction in natural H-bonded systems, (2) semiconducting properties of H-bonded organic pigments, and (3) exploitation of H-bonding for supramolecular assembly of organic conductors. H-bonding interactions are ubiquitous in biology, thus making the study of H-bonded organic semiconductors highly pertinent where interfacing of electronics with biological systems is desired.