51
|
Huang J, Frauenlob M, Shibata Y, Wang L, Nakajima T, Nonoyama T, Tsuda M, Tanaka S, Kurokawa T, Gong JP. Chitin-Based Double-Network Hydrogel as Potential Superficial Soft-Tissue-Repairing Materials. Biomacromolecules 2020; 21:4220-4230. [PMID: 32936628 DOI: 10.1021/acs.biomac.0c01003] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
Abstract
Chitin is a biopolymer, which has been proven to be a biomedical material candidate, yet the weak mechanical properties seriously limit their potentials. In this work, a chitin-based double-network (DN) hydrogel has been designed as a potential superficial repairing material. The hydrogel was synthesized through a double-network (DN) strategy composing hybrid regenerated chitin nanofiber (RCN)-poly (ethylene glycol diglycidyl ether) (PEGDE) as the first network and polyacrylamide (PAAm) as the second network. The hybrid RCN-PEGDE/PAAm DN hydrogel was strong and tough, possessing Young's modulus (elasticity) E 0.097 ± 0.020 MPa, fracture stress σf 0.449 ± 0.025 MPa, and work of fracture Wf 5.75 ± 0.35 MJ·m-3. The obtained DN hydrogel was strong enough for surgical requirements in the usage of soft tissue scaffolds. In addition, chitin endowed the DN hydrogel with good bacterial resistance and accelerated fibroblast proliferation, which increased the NIH3T3 cell number by nearly five times within 3 days. Subcutaneous implantation studies showed that the DN hydrogel did not induce inflammation after 4 weeks, suggesting a good biosafety in vivo. These results indicated that the hybrid RCN-PEGDE/PAAm DN hydrogel had great prospect as a rapid soft-tissue-repairing material.
Collapse
Affiliation(s)
- Junchao Huang
- Laboratory of Soft and Wet Matter, Faculty of Advanced Life Science, Hokkaido University, Sapporo 060-0810, Japan
| | - Martin Frauenlob
- Laboratory of Soft and Wet Matter, Faculty of Advanced Life Science, Hokkaido University, Sapporo 060-0810, Japan
| | - Yuki Shibata
- Laboratory of Soft and Wet Matter, Faculty of Advanced Life Science, Hokkaido University, Sapporo 060-0810, Japan
| | - Lei Wang
- Department of Cancer Pathology, Faculty of Medicine, Hokkaido University, Sapporo 060-8638, Japan.,Global Station for Soft Matter, Global Institution for Collaborative Research and Education (GI-CoRE), Hokkaido University, Sapporo 001-0021, Japan
| | - Tasuku Nakajima
- Laboratory of Soft and Wet Matter, Faculty of Advanced Life Science, Hokkaido University, Sapporo 060-0810, Japan.,Global Station for Soft Matter, Global Institution for Collaborative Research and Education (GI-CoRE), Hokkaido University, Sapporo 001-0021, Japan.,Institute for Chemical Reaction Design and Discovery (WPI-ICReDD), Hokkaido University, Sapporo 001-0021, Japan
| | - Takayuki Nonoyama
- Laboratory of Soft and Wet Matter, Faculty of Advanced Life Science, Hokkaido University, Sapporo 060-0810, Japan.,Global Station for Soft Matter, Global Institution for Collaborative Research and Education (GI-CoRE), Hokkaido University, Sapporo 001-0021, Japan
| | - Masumi Tsuda
- Department of Cancer Pathology, Faculty of Medicine, Hokkaido University, Sapporo 060-8638, Japan.,Global Station for Soft Matter, Global Institution for Collaborative Research and Education (GI-CoRE), Hokkaido University, Sapporo 001-0021, Japan.,Institute for Chemical Reaction Design and Discovery (WPI-ICReDD), Hokkaido University, Sapporo 001-0021, Japan
| | - Shinya Tanaka
- Department of Cancer Pathology, Faculty of Medicine, Hokkaido University, Sapporo 060-8638, Japan.,Global Station for Soft Matter, Global Institution for Collaborative Research and Education (GI-CoRE), Hokkaido University, Sapporo 001-0021, Japan.,Institute for Chemical Reaction Design and Discovery (WPI-ICReDD), Hokkaido University, Sapporo 001-0021, Japan
| | - Takayuki Kurokawa
- Laboratory of Soft and Wet Matter, Faculty of Advanced Life Science, Hokkaido University, Sapporo 060-0810, Japan.,Global Station for Soft Matter, Global Institution for Collaborative Research and Education (GI-CoRE), Hokkaido University, Sapporo 001-0021, Japan
| | - Jian Ping Gong
- Laboratory of Soft and Wet Matter, Faculty of Advanced Life Science, Hokkaido University, Sapporo 060-0810, Japan.,Global Station for Soft Matter, Global Institution for Collaborative Research and Education (GI-CoRE), Hokkaido University, Sapporo 001-0021, Japan.,Institute for Chemical Reaction Design and Discovery (WPI-ICReDD), Hokkaido University, Sapporo 001-0021, Japan
| |
Collapse
|
52
|
Pradhan S, Moore KM, Ainslie KM, Yadavalli VK. Flexible, microstructured surfaces using chitin-derived biopolymers. J Mater Chem B 2020; 7:5328-5335. [PMID: 31389964 DOI: 10.1039/c9tb00965e] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Chitin, one of the most abundant natural amino polysaccharides, is obtained primarily from the exoskeletons of crustaceans, crabs and shrimp. Chitin and its derivative chitosan have gained much attention in the field of biomedical research due to attractive properties such as biocompatibility, non-toxicity, biodegradability, low immunogenicity, and ease of availability. While work has been done on the use of chitin and chitosan as functional biomaterials by imparting specific properties, the potential of chitin as a biomaterial is somewhat limited owing to its intractable processing. In this work, we propose a facile reaction to modify the chitin chain with photoactive moieties for the realization of photocrosslinkable chitin. This chitin derivative is easily usable with a benign solvent formic acid to be able to form mechanically robust, optically transparent sheets. These films exhibit comparable tensile properties to that of native chitin and chitosan and better surface wettability. Most importantly, this material can be used to form precise, high resolution microarchitectures on both rigid and flexible substrates using a facile bench top photolithography technique. These flexible micropatterned 2D sheets of chitin were demonstrated as a dynamic cell culture substrate for the adhesion and proliferation of fibroblasts, wherein the chitin micropatterns act as a template for spatial guidance of cells. This chitin-based biopolymer can find diverse uses in tissue engineering as well as to form components for degradable bioelectronics.
Collapse
Affiliation(s)
- Sayantan Pradhan
- Department of Chemical and Life Science Engineering, Virginia Commonwealth University, Richmond, VA 23284, USA.
| | - Kathryn M Moore
- Pharmacoengineering & Molecular Pharmaceutics, UNC Eshelman School of Pharmacy, Chapel Hill, NC 27599, USA
| | - Kristy M Ainslie
- Pharmacoengineering & Molecular Pharmaceutics, UNC Eshelman School of Pharmacy, Chapel Hill, NC 27599, USA
| | - Vamsi K Yadavalli
- Department of Chemical and Life Science Engineering, Virginia Commonwealth University, Richmond, VA 23284, USA.
| |
Collapse
|
53
|
Eom K, Shin YE, Kim JK, Joo SH, Kim K, Kwak SK, Ko H, Jin J, Kang SJ. Tailored Poly(vinylidene fluoride- co-trifluoroethylene) Crystal Orientation for a Triboelectric Nanogenerator through Epitaxial Growth on a Chitin Nanofiber Film. NANO LETTERS 2020; 20:6651-6659. [PMID: 32809835 DOI: 10.1021/acs.nanolett.0c02488] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Tailoring the crystal orientation of poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) has attracted widespread interest because of its effects on the ferroelectric properties required for various electronic devices. In this study, we investigated the epitaxial growth of PVDF-TrFE on a chitin film for developing triboelectric nanogenerators (TENGs). The crystallographic match between the chitin and PVDF-TrFE enables the development of the intended crystal orientation, with the PVDF-TrFE polarization axis aligned perpendicular to the substrate. In addition, the epitaxially grown PVDF-TrFE on chitin not only enhances the performance of the TENG but also increases the stability of the hygroscopic chitin film against water. The corresponding TENG exhibits a significantly higher output current compared to that of a nonepitaxial PVDF-TrFE/chitin film. Furthermore, the triboelectric sensors based on epitaxial PVDF-TrFE/chitin films allow the monitoring of subtle pressures, suggesting that tailoring the crystal orientation of PVDF-TrFE is a promising approach for developing high-performance TENGs.
Collapse
Affiliation(s)
- Kijoo Eom
- Department of Energy Engineering, School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Korea
| | - Young-Eun Shin
- Department of Energy Engineering, School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Korea
| | - Joong-Kwon Kim
- School of Materials Science and Engineering, University of Ulsan, Ulsan 44610, Korea
| | - Se Hun Joo
- Department of Energy Engineering, School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Korea
| | - Kyungtae Kim
- Department of Energy Engineering, School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Korea
| | - Sang Kyu Kwak
- Department of Energy Engineering, School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Korea
| | - Hyunhyub Ko
- Department of Energy Engineering, School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Korea
| | - Jungho Jin
- School of Materials Science and Engineering, University of Ulsan, Ulsan 44610, Korea
| | - Seok Ju Kang
- Department of Energy Engineering, School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Korea
| |
Collapse
|
54
|
Hong SK, Kim SO, Lee KJ. Multidisciplinary Materials Research in KAIST Over the Last 50 Years. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e2000696. [PMID: 32869920 DOI: 10.1002/adma.202000696] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Affiliation(s)
- Seong Kwang Hong
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Sang Ouk Kim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Keon Jae Lee
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| |
Collapse
|
55
|
Lim YW, Jin J, Bae BS. Optically Transparent Multiscale Composite Films for Flexible and Wearable Electronics. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e1907143. [PMID: 32187405 DOI: 10.1002/adma.201907143] [Citation(s) in RCA: 36] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/31/2019] [Revised: 01/03/2020] [Indexed: 06/10/2023]
Abstract
One of the key breakthroughs enabling flexible electronics with novel form factors is the deployment of flexible polymer films in place of brittle glass, which is one of the major structural materials for conventional electronic devices. Flexible electronics requires polymer films with the core properties of glass (i.e., dimensional stability and transparency) while retaining the pliability of the polymer, which, however, is fundamentally intractable due to the mutually exclusive nature of these characteristics. An overview of a transparent fiber-reinforced polymer, which is suggested as a potentially viable structural material for emerging flexible/wearable electronics, is provided. This includes material concept and fabrication and a brief review of recent research progress on its applications over the past decade.
Collapse
Affiliation(s)
- Young-Woo Lim
- Department of Material Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Jungho Jin
- School of Materials Science and Engineering, University of Ulsan, 93 Daehak-ro, Nam-gu, Ulsan, 44610, Republic of Korea
| | - Byeong-Soo Bae
- Department of Material Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| |
Collapse
|
56
|
|
57
|
Li W, Liu Q, Zhang Y, Li C, He Z, Choy WCH, Low PJ, Sonar P, Kyaw AKK. Biodegradable Materials and Green Processing for Green Electronics. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e2001591. [PMID: 32584502 DOI: 10.1002/adma.202001591] [Citation(s) in RCA: 64] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/05/2020] [Revised: 04/30/2020] [Indexed: 06/11/2023]
Abstract
There is little question that the "electronic revolution" of the 20th century has impacted almost every aspect of human life. However, the emergence of solid-state electronics as a ubiquitous feature of an advanced modern society is posing new challenges such as the management of electronic waste (e-waste) that will remain through the 21st century. In addition to developing strategies to manage such e-waste, further challenges can be identified concerning the conservation and recycling of scarce elements, reducing the use of toxic materials and solvents in electronics processing, and lowering energy usage during fabrication methods. In response to these issues, the construction of electronic devices from renewable or biodegradable materials that decompose to harmless by-products is becoming a topic of great interest. Such "green" electronic devices need to be fabricated on industrial scale through low-energy and low-cost methods that involve low/non-toxic functional materials or solvents. This review highlights recent advances in the development of biodegradable materials and processing strategies for electronics with an emphasis on areas where green electronic devices show the greatest promise, including solar cells, organic field-effect transistors, light-emitting diodes, and other electronic devices.
Collapse
Affiliation(s)
- Wenhui Li
- Guangdong University Key Laboratory for Advanced Quantum Dot Displays, Shenzhen Key Laboratory for Advanced Quantum Dot Displays and Lighting, and Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Shenzhen, 518055, China
| | - Qian Liu
- School of Chemistry and Physics, Queensland University of Technology, Brisbane, QLD, 4000, Australia
| | - Yuniu Zhang
- Guangdong University Key Laboratory for Advanced Quantum Dot Displays, Shenzhen Key Laboratory for Advanced Quantum Dot Displays and Lighting, and Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Shenzhen, 518055, China
| | - Chang'an Li
- Guangdong University Key Laboratory for Advanced Quantum Dot Displays, Shenzhen Key Laboratory for Advanced Quantum Dot Displays and Lighting, and Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Shenzhen, 518055, China
| | - Zhenfei He
- Guangdong University Key Laboratory for Advanced Quantum Dot Displays, Shenzhen Key Laboratory for Advanced Quantum Dot Displays and Lighting, and Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Shenzhen, 518055, China
| | - Wallace C H Choy
- Department of Electrical and Electronic Engineering, The University of Hong Kong, Pokfulam Road, Hong Kong, 999077, China
| | - Paul J Low
- School of Molecular Sciences, The University of Western Australia, Perth, WA, 6009, Australia
| | - Prashant Sonar
- School of Chemistry and Physics, Queensland University of Technology, Brisbane, QLD, 4000, Australia
- Centre for Materials Science, Queensland University of Technology, Brisbane, QLD, 4000, Australia
| | - Aung Ko Ko Kyaw
- Guangdong University Key Laboratory for Advanced Quantum Dot Displays, Shenzhen Key Laboratory for Advanced Quantum Dot Displays and Lighting, and Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Shenzhen, 518055, China
| |
Collapse
|
58
|
Wijesena RN, Tissera ND, Rathnayaka V, de Silva RM, de Silva KN. Colloidal stability of chitin nanofibers in aqueous systems: Effect of pH, ionic strength, temperature & concentration. Carbohydr Polym 2020; 235:116024. [DOI: 10.1016/j.carbpol.2020.116024] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/01/2019] [Revised: 02/08/2020] [Accepted: 02/15/2020] [Indexed: 01/25/2023]
|
59
|
Wei P, Cai J, Zhang L. High‐Strength
and Tough Crystalline
Polysaccharide‐Based
Materials
†. CHINESE J CHEM 2020. [DOI: 10.1002/cjoc.202000036] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
Affiliation(s)
- Pingdong Wei
- College of Chemistry and Molecular Sciences, Wuhan University Wuhan Hubei 430072 China
- Hubei Engineering Center of Natural Polymer‐based Medical Materials, Wuhan University Wuhan Hubei 430072 China
| | - Jie Cai
- College of Chemistry and Molecular Sciences, Wuhan University Wuhan Hubei 430072 China
- Hubei Engineering Center of Natural Polymer‐based Medical Materials, Wuhan University Wuhan Hubei 430072 China
- Shenzhen Research Institute of Wuhan University, Wuhan University Shenzhen Guangdong 518057 China
| | - Lina Zhang
- College of Chemistry and Molecular Sciences, Wuhan University Wuhan Hubei 430072 China
- Hubei Engineering Center of Natural Polymer‐based Medical Materials, Wuhan University Wuhan Hubei 430072 China
| |
Collapse
|
60
|
Yang J, Luo J, Liu H, Shi L, Welch K, Wang Z, Strømme M. Electrochemically Active, Compressible, and Conducting Silk Fibroin Hydrogels. Ind Eng Chem Res 2020. [DOI: 10.1021/acs.iecr.0c00407] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/08/2023]
Affiliation(s)
- Jiaojiao Yang
- State Key Laboratory of Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China
- Department of Engineering Science, Uppsala University, Uppsala SE-75121, Sweden
| | - Jun Luo
- Department of Engineering Science, Uppsala University, Uppsala SE-75121, Sweden
- College of Polymer Science and Engineering, Sichuan University, Chengdu 610065, China
| | - Haidong Liu
- Department of Chemistry-Ångström Laboratory, Uppsala University, Uppsala SE-75121, Sweden
| | - Liyang Shi
- State Key Laboratory of Chemo/Biosensing and Chemometrics, College of Biology, Hunan University, Changsha 410082, China
| | - Ken Welch
- Department of Engineering Science, Uppsala University, Uppsala SE-75121, Sweden
| | - Zhaohui Wang
- Department of Chemistry-Ångström Laboratory, Uppsala University, Uppsala SE-75121, Sweden
- College of Materials Science and Engineering, Hunan University, Changsha 410082, China
| | - Maria Strømme
- Department of Engineering Science, Uppsala University, Uppsala SE-75121, Sweden
| |
Collapse
|
61
|
Naghdi T, Golmohammadi H, Yousefi H, Hosseinifard M, Kostiv U, Horák D, Merkoçi A. Chitin Nanofiber Paper toward Optical (Bio)sensing Applications. ACS APPLIED MATERIALS & INTERFACES 2020; 12:15538-15552. [PMID: 32148018 DOI: 10.1021/acsami.9b23487] [Citation(s) in RCA: 23] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Because of numerous inherent and unrivaled features of nanofibers made of chitin, the second most plentiful natural-based polymer (after cellulose), including affordability, abundant nature, biodegradability, biocompatibility, commercial availability, flexibility, transparency, and extraordinary mechanical and physicochemical properties, chitin nanofibers (ChNFs) are being applied as one of the most appealing bionanomaterials in a myriad of fields. Herein, we exploited the beneficial properties offered by the ChNF paper to fabricate transparent, efficient, biocompatible, flexible, and miniaturized optical sensing bioplatforms via embedding/immobilizing various plasmonic nanoparticles (silver and gold nanoparticles), photoluminescent nanoparticles (CdTe quantum dots, carbon dots, and NaYF4:Yb3+@Er3+&SiO2 upconversion nanoparticles) along with colorimetric reagents (curcumin, dithizone, etc.) in the 3D nanonetwork scaffold of the ChNF paper. Several configurations, including 2D multi-wall and 2D cuvette patterns with hydrophobic barriers/walls and hydrophilic test zones/channels, were easily printed using laser printing technology or punched as spot patterns on the dried ChNF paper-based nanocomposites to fabricate the (bio)sensing platforms. A variety of (bio)chemicals as model analytes were used to confirm the efficiency and applicability of the fabricated ChNF paper-based sensing bioplatforms. The developed (bio)sensors were also coupled with smartphone technology to take the advantages of smartphone-based monitoring/sensing devices along with the Internet of Nano Things (IoNT)/the Internet of Medical Things (IoMT) concepts for easy-to-use sensing applications. Building upon the unrivaled and inherent features of ChNF as a very promising bionanomaterial, we foresee that the ChNF paper-based sensing bioplatforms will emerge new opportunities for the development of innovative strategies to fabricate cost-effective, simple, smart, transparent, biodegradable, miniaturized, flexible, portable, and easy-to-use (bio)sensing/monitoring devices.
Collapse
Affiliation(s)
- Tina Naghdi
- Nanosensor Bioplatforms Laboratory, Chemistry and Chemical Engineering Research Center of Iran, 14335-186 Tehran, Iran
- ICN2 - Nanobioelectronics & Biosensors Group, Institut Catala de Nanociencia i Nanotecnologia, Campus UAB, Bellaterra, Barcelona 08193, Spain
| | - Hamed Golmohammadi
- Nanosensor Bioplatforms Laboratory, Chemistry and Chemical Engineering Research Center of Iran, 14335-186 Tehran, Iran
| | - Hossein Yousefi
- Laboratory of Sustainable Nanomaterials, Department of Wood Engineering and Technology, Gorgan University of Agricultural Sciences and Natural Resources, Gorgan 4913815739, Iran
| | - Mohammad Hosseinifard
- Nanosensor Bioplatforms Laboratory, Chemistry and Chemical Engineering Research Center of Iran, 14335-186 Tehran, Iran
| | - Uliana Kostiv
- Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského Sq. 2, Prague 6 162 06, Czech Republic
| | - Daniel Horák
- Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovského Sq. 2, Prague 6 162 06, Czech Republic
| | - Arben Merkoçi
- ICN2 - Nanobioelectronics & Biosensors Group, Institut Catala de Nanociencia i Nanotecnologia, Campus UAB, Bellaterra, Barcelona 08193, Spain
- ICREA, Pg. Lluís Companys 23, 08010 Barcelona, Spain
| |
Collapse
|
62
|
Biodegradable, Flexible, and Transparent Conducting Silver Nanowires/Polylactide Film with High Performance for Optoelectronic Devices. Polymers (Basel) 2020; 12:polym12030604. [PMID: 32155910 PMCID: PMC7182953 DOI: 10.3390/polym12030604] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/02/2020] [Revised: 03/03/2020] [Accepted: 03/04/2020] [Indexed: 12/24/2022] Open
Abstract
As a synthetic renewable and biodegradable material, the application of polylactide (PLA) in the green flexible electronics has attracted intensive attention due to the increasingly serious issue of electronic waste. Unfortunately, the development of PLA-based optoelectronic devices is greatly hindered by the poor heat resistance and mechanical property of PLA. To overcome these limitations, herein, we report a facile and promising route to fabricate silver nanowires/PLA (AgNW/PLA) film with largely improved properties by utilizing the stereocomplex (SC) crystallization between poly(L-lactide) (PLLA) and poly(D-lactide) (PDLA). Through embedding the AgNW networks into the PLLA:PDLA blend matrix via a transfer method, the AgNW/PLLA:PDLA film with both high transparency and excellent conductivity was obtained. Compared with the AgNW/PLLA film, the formation of SC crystallites in the composites matrix could significantly enhance not only heat resistance but also mechanical strength of the AgNW/PLLA:PDLA film. Exceptionally, the AgNW/PLLA:PDLA film exhibited superior flexibility and could maintain excellent electrical conductivity stability even under the condition of 10,000 repeated bending cycles and 100 tape test cycles. In addition, the organic light-emitting diodes (OLEDs) with the AgNW/PLLA:PDLA films as electrodes were successfully fabricated in this work for the first time and they exhibited highly flexible, luminous, as well as hydrolytic degradation properties. This work could provide a low-cost and environment-friendly avenue towards fabricating high-performanced PLA-based biodegradable electronics.
Collapse
|
63
|
Xiong R, Luan J, Kang S, Ye C, Singamaneni S, Tsukruk VV. Biopolymeric photonic structures: design, fabrication, and emerging applications. Chem Soc Rev 2020; 49:983-1031. [PMID: 31960001 DOI: 10.1039/c8cs01007b] [Citation(s) in RCA: 74] [Impact Index Per Article: 18.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/03/2023]
Abstract
Biological photonic structures can precisely control light propagation, scattering, and emission via hierarchical structures and diverse chemistry, enabling biophotonic applications for transparency, camouflaging, protection, mimicking and signaling. Corresponding natural polymers are promising building blocks for constructing synthetic multifunctional photonic structures owing to their renewability, biocompatibility, mechanical robustness, ambient processing conditions, and diverse surface chemistry. In this review, we provide a summary of the light phenomena in biophotonic structures found in nature, the selection of corresponding biopolymers for synthetic photonic structures, the fabrication strategies for flexible photonics, and corresponding emerging photonic-related applications. We introduce various photonic structures, including multi-layered, opal, and chiral structures, as well as photonic networks in contrast to traditionally considered light absorption and structural photonics. Next, we summarize the bottom-up and top-down fabrication approaches and physical properties of organized biopolymers and highlight the advantages of biopolymers as building blocks for realizing unique bioenabled photonic structures. Furthermore, we consider the integration of synthetic optically active nanocomponents into organized hierarchical biopolymer frameworks for added optical functionalities, such as enhanced iridescence and chiral photoluminescence. Finally, we present an outlook on current trends in biophotonic materials design and fabrication, including current issues, critical needs, as well as promising emerging photonic applications.
Collapse
Affiliation(s)
- Rui Xiong
- School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332-0245, USA.
| | | | | | | | | | | |
Collapse
|
64
|
Paper-based point-of-care immunoassays: Recent advances and emerging trends. Biotechnol Adv 2020; 39:107442. [DOI: 10.1016/j.biotechadv.2019.107442] [Citation(s) in RCA: 95] [Impact Index Per Article: 23.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/19/2018] [Revised: 07/04/2019] [Accepted: 08/26/2019] [Indexed: 01/23/2023]
|
65
|
Manjakkal L, Dervin S, Dahiya R. Flexible potentiometric pH sensors for wearable systems. RSC Adv 2020; 10:8594-8617. [PMID: 35496561 PMCID: PMC9050124 DOI: 10.1039/d0ra00016g] [Citation(s) in RCA: 64] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/01/2020] [Revised: 03/30/2020] [Accepted: 02/15/2020] [Indexed: 12/21/2022] Open
Abstract
There is a growing demand for developing wearable sensors that can non-invasively detect the signs of chronic diseases early on to possibly enable self-health management. Among these the flexible and stretchable electrochemical pH sensors are particularly important as the pH levels influence most chemical and biological reactions in materials, life and environmental sciences. In this review, we discuss the most recent developments in wearable electrochemical potentiometric pH sensors, covering the key topics such as (i) suitability of potentiometric pH sensors in wearable systems; (ii) designs of flexible potentiometric pH sensors, which may vary with target applications; (iii) materials for various components of the sensor such as substrates, reference and sensitive electrode; (iv) applications of flexible potentiometric pH sensors, and (v) the challenges relating to flexible potentiometric pH sensors.
Collapse
Affiliation(s)
- Libu Manjakkal
- Bendable Electronics and Sensing Technologies (BEST) Group, School of Engineering, University of Glasgow G12 8QQ UK
| | - Saoirse Dervin
- Bendable Electronics and Sensing Technologies (BEST) Group, School of Engineering, University of Glasgow G12 8QQ UK
| | - Ravinder Dahiya
- Bendable Electronics and Sensing Technologies (BEST) Group, School of Engineering, University of Glasgow G12 8QQ UK
| |
Collapse
|
66
|
Jian M, Zhang Y, Liu Z. Natural Biopolymers for Flexible Sensing and Energy Devices. CHINESE JOURNAL OF POLYMER SCIENCE 2020. [DOI: 10.1007/s10118-020-2379-9] [Citation(s) in RCA: 32] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/25/2022]
|
67
|
Abdel-Mohsen A, Abdel-Rahman R, Kubena I, Kobera L, Spotz Z, Zboncak M, Prikryl R, Brus J, Jancar J. Chitosan-glucan complex hollow fibers reinforced collagen wound dressing embedded with aloe vera. Part I: Preparation and characterization. Carbohydr Polym 2020; 230:115708. [DOI: 10.1016/j.carbpol.2019.115708] [Citation(s) in RCA: 26] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/06/2019] [Revised: 11/27/2019] [Accepted: 12/05/2019] [Indexed: 12/22/2022]
|
68
|
Surface properties of chitin-glucan nanopapers from Agaricus bisporus. Int J Biol Macromol 2020; 148:677-687. [PMID: 31954796 DOI: 10.1016/j.ijbiomac.2020.01.141] [Citation(s) in RCA: 16] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/30/2019] [Revised: 01/10/2020] [Accepted: 01/15/2020] [Indexed: 02/07/2023]
Abstract
The structural component of fungal cell walls comprises of chitin covalently bonded to glucan; this constitutes a native composite material (chitin-glucan, CG) combining the strength of chitin and the toughness of glucan. It has a native nano-fibrous structure in contrast to nanocellulose, for which further nanofibrillation is required. Nanopapers can be manufactured from fungal chitin nanofibrils (FChNFs). FChNF nanopapers are potentially applicable in packaging films, composites, or membranes for water treatment due to their distinct surface properties inherited from the composition of chitin and glucan. Here, chitin-glucan nanofibrils were extracted from common mushroom (Agaricus bisporus) cell walls utilizing a mild isolation procedure to preserve the native quality of the chitin-glucan complex. These extracts were readily disintegrated into nanofibre dimensions by a low-energy mechanical blending, thus making the extract dispersion directly suitable for nanopaper preparation using a simple vacuum filtration process. Chitin-glucan nanopaper morphology, mechanical, chemical, and surface properties were studied and compared to chitin nanopapers of crustacean (Cancer pagurus) origin. It was found that fungal extract nanopapers had distinct physico-chemical surface properties, being more hydrophobic than crustacean chitin.
Collapse
|
69
|
Nawawi WMFBW, Jones M, Murphy RJ, Lee KY, Kontturi E, Bismarck A. Nanomaterials Derived from Fungal Sources-Is It the New Hype? Biomacromolecules 2020; 21:30-55. [PMID: 31592650 PMCID: PMC7076696 DOI: 10.1021/acs.biomac.9b01141] [Citation(s) in RCA: 39] [Impact Index Per Article: 9.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/18/2019] [Revised: 10/07/2019] [Indexed: 12/21/2022]
Abstract
Greener alternatives to synthetic polymers are constantly being investigated and sought after. Chitin is a natural polysaccharide that gives structural support to crustacean shells, insect exoskeletons, and fungal cell walls. Like cellulose, chitin resides in nanosized structural elements that can be isolated as nanofibers and nanocrystals by various top-down approaches, targeted at disintegrating the native construct. Chitin has, however, been largely overshadowed by cellulose when discussing the materials aspects of the nanosized components. This Perspective presents a thorough overview of chitin-related materials research with an analytical focus on nanocomposites and nanopapers. The red line running through the text emphasizes the use of fungal chitin that represents several advantages over the more popular crustacean sources, particularly in terms of nanofiber isolation from the native matrix. In addition, many β-glucans are preserved in chitin upon its isolation from the fungal matrix, enabling new horizons for various engineering solutions.
Collapse
Affiliation(s)
- Wan M. F. B. W. Nawawi
- Department
of Chemical Engineering, Imperial College
London, South Kensington Campus, London SW7 2AZ, U.K.
- Department
of Biotechnology Engineering, International
Islamic University Malaysia, P.O. Box 10, 50728 Kuala Lumpur, Malaysia
| | - Mitchell Jones
- School
of Engineering, RMIT University, Bundoora
East Campus, P.O. Box 71, Bundoora 3083, Victoria, Australia
- Polymer and
Composite Engineering (PaCE) Group, Institute of Materials Chemistry
and Research, Faculty of Chemistry, University
of Vienna, Währinger
Strasse 42, 1090 Vienna, Austria
| | - Richard J. Murphy
- Centre
for Environment & Sustainability, University
of Surrey, Arthur C Clarke
building, Floor 2, Guildford GU2 7XH, U.K.
| | - Koon-Yang Lee
- Department
of Aeronautics, Imperial College London,
South Kensington Campus, London SW7 2AZ, U.K.
| | - Eero Kontturi
- Department
of Bioproducts and Biosystems, Aalto University, P.O. Box 16300, FI-00076 Aalto, Finland
| | - Alexander Bismarck
- Department
of Chemical Engineering, Imperial College
London, South Kensington Campus, London SW7 2AZ, U.K.
- Polymer and
Composite Engineering (PaCE) Group, Institute of Materials Chemistry
and Research, Faculty of Chemistry, University
of Vienna, Währinger
Strasse 42, 1090 Vienna, Austria
| |
Collapse
|
70
|
Versatile synthesis, characterization and properties of β-chitin derivatives from aqueous KOH/urea solution. Carbohydr Polym 2020; 227:115345. [DOI: 10.1016/j.carbpol.2019.115345] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/05/2019] [Revised: 09/07/2019] [Accepted: 09/18/2019] [Indexed: 12/16/2022]
|
71
|
Naghdi T, Yousefi H, Sharifi AR, Golmohammadi H. Nanopaper-based sensors. COMPREHENSIVE ANALYTICAL CHEMISTRY 2020. [DOI: 10.1016/bs.coac.2020.02.003] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
|
72
|
Green nanocomposite made with chitin and bamboo nanofibers and its mechanical, thermal and biodegradable properties for food packaging. Int J Biol Macromol 2019; 144:491-499. [PMID: 31857175 DOI: 10.1016/j.ijbiomac.2019.12.124] [Citation(s) in RCA: 24] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/18/2019] [Revised: 12/03/2019] [Accepted: 12/14/2019] [Indexed: 11/20/2022]
Abstract
This paper reports a green nanocomposite made by simply blending chitin nanofibers and bamboo cellulose nanofibers without chemically dissolving chitin and cellulose raw materials. Good biodegradability and biocompatibility of chitin in conjunction with good mechanical properties of cellulose are beneficial for developing green nanocomposite applicable for food packaging. The bamboo cellulose nanofiber (BACNF) is isolated by using a TEMPO-oxidation followed by an aqueous counter collision (ACC) method. Chitin nanofiber (CTNF) is isolated by using the ACC method. A simple blending is used to prepare the nanocomposite with different CTNF and BACNF concentration. Morphologies, mechanical properties, chemical interactions, thermal properties, water contact angles and biodegradability of the nanocomposite are investigated. The tensile strength and Young's modulus of the prepared nanocomposite increased up to 3 and 1.3 times, respectively as the BACNF concentration increase. The nanocomposite exhibites better thermal stability than the pure BACNF. Furthermore, the nanocomposite is fully biodegradable within a week. Good mechanical, thermal properties as well as biodegradability of the nanocomposite are promising for possible food packaging application.
Collapse
|
73
|
Jeon Y, Choi HR, Kwon JH, Choi S, Nam KM, Park KC, Choi KC. Sandwich-structure transferable free-form OLEDs for wearable and disposable skin wound photomedicine. LIGHT, SCIENCE & APPLICATIONS 2019; 8:114. [PMID: 31839934 PMCID: PMC6900403 DOI: 10.1038/s41377-019-0221-3] [Citation(s) in RCA: 31] [Impact Index Per Article: 6.2] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/09/2019] [Revised: 10/28/2019] [Accepted: 11/10/2019] [Indexed: 05/31/2023]
Abstract
Free-form optoelectronic devices can provide hyper-connectivity over space and time. However, most conformable optoelectronic devices can only be fabricated on flat polymeric materials using low-temperature processes, limiting their application and forms. This paper presents free-form optoelectronic devices that are not dependent on the shape or material. For medical applications, the transferable OLED (10 μm) is formed in a sandwich structure with an ultra-thin transferable barrier (4.8 μm). The results showed that the fabricated sandwich-structure transferable OLED (STOLED) exhibit the same high-efficiency performance on cylindrical-shaped materials and on materials such as textile and paper. Because the neutral axis is freely adjustable using the sandwich structure, the textile-based OLED achieved both folding reliability and washing reliability, as well as a long operating life (>150 h). When keratinocytes were irradiated with red STOLED light, cell proliferation and cell migration increased by 26 and 32%, respectively. In the skin equivalent model, the epidermis thickness was increased by 39%; additionally, in organ culture, not only was the skin area increased by 14%, but also, re-epithelialization was highly induced. Based on the results, the STOLED is expected to be applicable in various wearable and disposable photomedical devices.
Collapse
Affiliation(s)
- Yongmin Jeon
- School of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, 34141 Republic of Korea
| | - Hye-Ryung Choi
- Department of Dermatology, Seoul National University Bundang Hospital (SNUBH), Seongnam, 13620 Republic of Korea
| | - Jeong Hyun Kwon
- School of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, 34141 Republic of Korea
| | - Seungyeop Choi
- School of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, 34141 Republic of Korea
| | - Kyung Mi Nam
- Department of Dermatology, Seoul National University Bundang Hospital (SNUBH), Seongnam, 13620 Republic of Korea
| | - Kyoung-Chan Park
- Department of Dermatology, Seoul National University Bundang Hospital (SNUBH), Seongnam, 13620 Republic of Korea
| | - Kyung Cheol Choi
- School of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, 34141 Republic of Korea
| |
Collapse
|
74
|
Lei J, Zou B, Zhang R, Zhang K, Xie R, Zhang W, Wu J, Li S, Zheng B, Huo F. Regenerating leather waste for flexible pressure sensing applications. JOURNAL OF LEATHER SCIENCE AND ENGINEERING 2019. [DOI: 10.1186/s42825-019-0009-5] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
|
75
|
Nguyen HL, Ju S, Hao LT, Tran TH, Cha HG, Cha YJ, Park J, Hwang SY, Yoon DK, Hwang DS, Oh DX. The Renewable and Sustainable Conversion of Chitin into a Chiral Nitrogen-Doped Carbon-Sheath Nanofiber for Enantioselective Adsorption. CHEMSUSCHEM 2019; 12:3236-3242. [PMID: 31081284 DOI: 10.1002/cssc.201901176] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/02/2019] [Indexed: 06/09/2023]
Abstract
Well-known hard-template methods for nitrogen (N)-doped chiral carbon nanomaterials require complicated construction and removal of the template, high-temperature pyrolysis, harsh chemical treatments, and additional N-doping processes. If naturally occurring chiral nematic chitin nanostructures [(C8 H13 NO5 )n ] in exoskeletons were wholly transformed into an N-doped carbon, this would be an efficient and sustainable method to obtain a useful chiral nanomaterial. Here, a simple, sacrificial-template-free, and environmentally mild method was developed to produce an N-doped chiral nematic carbon-sheath nanofibril hydrogel with a surface area >300 m2 g-1 and enantioselective properties from renewable chitin biomass. Calcium-saturated methanol physically exfoliated bulk chitin and produced a chiral nematic nanofibril hydrogel. Hydrothermal treatment of the chiral chitin hydrogel at 190 °C produced an N-doped chiral carbon-sheath nanofibril hydrogel without N-doping. This material preferentially adsorbed d-lactic acid over l-lactic acid and produced 16.3 % enantiomeric excess of l-lactic acid from a racemic mixture.
Collapse
Affiliation(s)
- Hoang-Linh Nguyen
- Research Center for Bio-based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan, 44429, Republic of Korea
- School of Environmental Science and Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 790-784, Republic of Korea
| | - Sungbin Ju
- Research Center for Bio-based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan, 44429, Republic of Korea
- School of Environmental Science and Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 790-784, Republic of Korea
| | - Lam Tan Hao
- Research Center for Bio-based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan, 44429, Republic of Korea
- Advanced Materials and Chemical Engineering, University of Science and Technology (UST), Daejeon, 305-333, Republic of Korea
| | - Thang Hong Tran
- Research Center for Bio-based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan, 44429, Republic of Korea
- Advanced Materials and Chemical Engineering, University of Science and Technology (UST), Daejeon, 305-333, Republic of Korea
| | - Hyun Gil Cha
- Research Center for Bio-based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan, 44429, Republic of Korea
| | - Yoon Jeong Cha
- Graduate School of Nanoscience and Technology, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, 305-701, Republic of Korea
| | - Jeyoung Park
- Research Center for Bio-based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan, 44429, Republic of Korea
- Advanced Materials and Chemical Engineering, University of Science and Technology (UST), Daejeon, 305-333, Republic of Korea
| | - Sung Yeon Hwang
- Research Center for Bio-based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan, 44429, Republic of Korea
- Advanced Materials and Chemical Engineering, University of Science and Technology (UST), Daejeon, 305-333, Republic of Korea
| | - Dong Ki Yoon
- Graduate School of Nanoscience and Technology, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, 305-701, Republic of Korea
- Department of Chemistry, KAIST, Daejeon, 305-701, Republic of Korea
| | - Dong Soo Hwang
- School of Environmental Science and Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 790-784, Republic of Korea
| | - Dongyeop X Oh
- Research Center for Bio-based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan, 44429, Republic of Korea
- Advanced Materials and Chemical Engineering, University of Science and Technology (UST), Daejeon, 305-333, Republic of Korea
| |
Collapse
|
76
|
Cha GD, Kang D, Lee J, Kim D. Bioresorbable Electronic Implants: History, Materials, Fabrication, Devices, and Clinical Applications. Adv Healthc Mater 2019; 8:e1801660. [PMID: 30957984 DOI: 10.1002/adhm.201801660] [Citation(s) in RCA: 57] [Impact Index Per Article: 11.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/29/2018] [Revised: 02/14/2019] [Indexed: 12/13/2022]
Abstract
Medical implants, either passive implants for structural support or implantable devices with active electronics, have been widely used for the diagnosis and treatment of various diseases and clinical issues. These implants offer various functions, including mechanical support of biological structures in orthopedic and dental applications, continuous electrophysiological monitoring and feedback of electrical stimulation in neuronal and cardiac applications, and controlled drug delivery while maintaining arterial structure in drug-eluting stents. Although these implants exhibit long-term biocompatibility, surgery for their retrieval is often required, which imposes physical, biological, and economical burdens on the patients. Therefore, as an alternative to such secondary surgeries, bioresorbable implants that disappear after a certain period of time inside the body, including bioresorbable active electronics, have been highlighted recently. This review first discusses the historical background of medical implants and briefly define related terminology. Representative examples of non-degradable medical implants for passive structural support and/or for diagnosis and therapy with active electronics are also provided. Then, recent progress in bioresorbable active implants composed of biosignal sensors, actuators for therapeutics, wireless power supply components, and their integrated systems are reviewed. Finally, clinical applications of these bioresorbable electronic implants are exemplified with brief conclusion and future outlook.
Collapse
Affiliation(s)
- Gi Doo Cha
- Center for Nanoparticle ResearchInstitute for Basic Science (IBS) Seoul 08826 Republic of Korea
- School of Chemical and Biological EngineeringInstitute of Chemical ProcessesSeoul National University (SNU) Seoul 08826 Republic of Korea
| | - Dayoung Kang
- Center for Nanoparticle ResearchInstitute for Basic Science (IBS) Seoul 08826 Republic of Korea
- School of Chemical and Biological EngineeringInstitute of Chemical ProcessesSeoul National University (SNU) Seoul 08826 Republic of Korea
| | - Jongha Lee
- Center for Nanoparticle ResearchInstitute for Basic Science (IBS) Seoul 08826 Republic of Korea
- School of Chemical and Biological EngineeringInstitute of Chemical ProcessesSeoul National University (SNU) Seoul 08826 Republic of Korea
| | - Dae‐Hyeong Kim
- Center for Nanoparticle ResearchInstitute for Basic Science (IBS) Seoul 08826 Republic of Korea
- School of Chemical and Biological EngineeringInstitute of Chemical ProcessesSeoul National University (SNU) Seoul 08826 Republic of Korea
| |
Collapse
|
77
|
Önder Aksoy, Uzun İ, Topal G, Ocak YS, Çelik Ö, Batibay D. Schottky Diodes Based on the New Chitin Derivatives. POLYMER SCIENCE SERIES A 2019. [DOI: 10.1134/s0965545x19030027] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
|
78
|
Ye D, Lei X, Li T, Cheng Q, Chang C, Hu L, Zhang L. Ultrahigh Tough, Super Clear, and Highly Anisotropic Nanofiber-Structured Regenerated Cellulose Films. ACS NANO 2019; 13:4843-4853. [PMID: 30943014 DOI: 10.1021/acsnano.9b02081] [Citation(s) in RCA: 90] [Impact Index Per Article: 18.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/23/2023]
Abstract
While tremendous efforts have been dedicated to developing environmentally friendly films made from natural polymers and renewable resources, in particular, multifunctional films featuring extraordinary mechanical properties, optical performance, and ordered nanostructure, challenges still remain in achieving all these characteristics in a single material via a scalable process. Here, we designed a green route to fabricating strong, super tough, regenerated cellulose films featuring tightly stacked and long-range aligned cellulose nanofibers self-assembled from cellulose solution in alkali/urea aqueous systems. The well-aligned nanofibers were generated by directionally controlling the aggregation of cellulose chains in the hydrogel state using a preorientation-assisted dual cross-linking approach; i.e., a physical cross-linking was rapidly introduced to permanently reserve the temporarily aligned nanostructure generated by preorienting the covalent cross-linked gels. After a structural densification in air-drying of hydrogel, high strength was achieved, and more importantly, a record-high toughness (41.1 MJ m-3) in anisotropic nanofibers-structured cellulose films (ACFs) was reached. Moreover, the densely packed and well-aligned cellulose nanofibers significantly decreased the interstices in the films to avoid light scattering, granting ACFs with high optical clarity (91%), low haze (<3%), and birefringence behaviors. This facile and high-efficiency strategy might be very scalable in fabricating high-strength, super tough, and clear cellulose films for emerging biodegradable next-generation packaging, flexible electronic, and optoelectronic applications.
Collapse
Affiliation(s)
- Dongdong Ye
- College of Chemistry and Molecular Sciences , Wuhan University , Wuhan 430072 , China
- School of Textile Materials and Engineering , Wuyi University , Jiangmen 529020 , China
| | - Xiaojuan Lei
- College of Chemistry and Molecular Sciences , Wuhan University , Wuhan 430072 , China
| | - Tian Li
- Department of Materials Science and Engineering , University of Maryland , College Park , Maryland 20742 , United States
| | - Qiaoyun Cheng
- College of Chemistry and Molecular Sciences , Wuhan University , Wuhan 430072 , China
| | - Chunyu Chang
- College of Chemistry and Molecular Sciences , Wuhan University , Wuhan 430072 , China
| | - Liangbing Hu
- Department of Materials Science and Engineering , University of Maryland , College Park , Maryland 20742 , United States
| | - Lina Zhang
- College of Chemistry and Molecular Sciences , Wuhan University , Wuhan 430072 , China
| |
Collapse
|
79
|
Tran TH, Nguyen HL, Hao LT, Kong H, Park JM, Jung SH, Cha HG, Lee JY, Kim H, Hwang SY, Park J, Oh DX. A ball milling-based one-step transformation of chitin biomass to organo-dispersible strong nanofibers passing highly time and energy consuming processes. Int J Biol Macromol 2019; 125:660-667. [DOI: 10.1016/j.ijbiomac.2018.12.086] [Citation(s) in RCA: 21] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/30/2018] [Revised: 12/02/2018] [Accepted: 12/08/2018] [Indexed: 12/11/2022]
|
80
|
Biswas SK, Tanpichai S, Witayakran S, Yang X, Shams MI, Yano H. Thermally Superstable Cellulosic-Nanorod-Reinforced Transparent Substrates Featuring Microscale Surface Patterns. ACS NANO 2019; 13:2015-2023. [PMID: 30698942 DOI: 10.1021/acsnano.8b08477] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/09/2023]
Abstract
The recent rapid expansion of thin-film, bendable, and wearable consumer (opto)electronics demands flexible and transparent substrates other than glass. Plastics are the traditional choice, but they require amelioration because of their thermal instability. Here, we report the successful conversion of a soft and thermally vulnerable polymer into a highly thermally stable transparent nanocomposite material. This is achieved by the meticulous choice of a polymer with a glass-transition temperature below 0 °C that gives stable mechanics above room temperature, reinforcing the polymer with a load-bearing hierarchical network of the incredibly strong and stable natural material: cellulose nanorods. Owing to the Pickering emulsification process, the nanocomposites inherit the self-assembled structural hierarchy from the cellulose nanorod-encapsulated resin droplets. The ameliorated nanocomposites have highly desirable high-temperature endurance (∼150-180 °C) in terms of the thermomechanical, thermodimensional, and thermo-optical performance. Any photonic nano- or microstructures can be directly molded on the surface of the nanocomposites in high precision for better light management in photonic and opto-electronic applications. The highlight of this work is the demonstration of a highly thermally stable microlens array on the ameliorated transparent nanocomposite.
Collapse
Affiliation(s)
| | - Supachok Tanpichai
- Learning Institute , King Mongkut's University of Technology Thonburi , Bangkok 10140 , Thailand
| | - Suteera Witayakran
- Kasetsart Agricultural and Agro-Industrial Product Improvement Institute , Kasetsart University , Bangkok 10900 , Thailand
| | | | - Md Iftekhar Shams
- Forestry and Wood Technology Discipline , Khulna University , Khulna 9208 , Bangladesh
| | | |
Collapse
|
81
|
Amdursky N, Głowacki ED, Meredith P. Macroscale Biomolecular Electronics and Ionics. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2019; 31:e1802221. [PMID: 30334284 DOI: 10.1002/adma.201802221] [Citation(s) in RCA: 53] [Impact Index Per Article: 10.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/08/2018] [Revised: 06/25/2018] [Indexed: 05/18/2023]
Abstract
The conduction of ions and electrons over multiple length scales is central to the processes that drive the biological world. The multidisciplinary attempts to elucidate the physics and chemistry of electron, proton, and ion transfer in biological charge transfer have focused primarily on the nano- and microscales. However, recently significant progress has been made on biomolecular materials that can support ion and electron currents over millimeters if not centimeters. Likewise, similar transport phenomena in organic semiconductors and ionics have led to new innovations in a wide variety of applications from energy generation and storage to displays and bioelectronics. Here, the underlying principles of conduction on the macroscale in biomolecular materials are discussed, highlighting recent examples, and particularly the establishment of accurate structure-property relationships to guide rationale material and device design. The technological viability of biomolecular electronics and ionics is also discussed.
Collapse
Affiliation(s)
- Nadav Amdursky
- Schulich Faculty of Chemistry, Technion-Israel Institute of Technology, Haifa, 3200003, Israel
| | - Eric Daniel Głowacki
- Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Bredgatan 33, SE-60174, Norrköping, Sweden
- Wallenberg Centre for Molecular Medicine, Linköping University, 58183, Linköping, Sweden
| | - Paul Meredith
- Department of Physics, Swansea University, Singleton Park, Swansea, SA2 8PP, Wales, UK
| |
Collapse
|
82
|
Xu H, Zhang L, Cai J. Injectable, Self-Healing, β-Chitin-Based Hydrogels with Excellent Cytocompatibility, Antibacterial Activity, and Potential As Drug/Cell Carriers. ACS APPLIED BIO MATERIALS 2018; 2:196-204. [DOI: 10.1021/acsabm.8b00548] [Citation(s) in RCA: 27] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
Affiliation(s)
- Huan Xu
- College of Chemistry & Molecular Sciences, Wuhan University, Wuhan 430072, China
| | - Lina Zhang
- College of Chemistry & Molecular Sciences, Wuhan University, Wuhan 430072, China
| | - Jie Cai
- College of Chemistry & Molecular Sciences, Wuhan University, Wuhan 430072, China
- Research Institute of Shenzhen, Wuhan University, Shenzhen 518057, China
| |
Collapse
|
83
|
Zhang Y, Zhang L, Cui K, Ge S, Cheng X, Yan M, Yu J, Liu H. Flexible Electronics Based on Micro/Nanostructured Paper. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2018; 30:e1801588. [PMID: 30066444 DOI: 10.1002/adma.201801588] [Citation(s) in RCA: 107] [Impact Index Per Article: 17.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/11/2018] [Revised: 05/02/2018] [Indexed: 05/26/2023]
Abstract
Over the past several years, a new surge of interest in paper electronics has arisen due to the numerous merits of simple micro/nanostructured substrates. Herein, the latest advances and principal issues in the design and fabrication of paper-based flexible electronics are highlighted. Following an introduction of the fascinating properties of paper matrixes, the construction of paper substrates from diverse functional materials for flexible electronics and their underlying principles are described. Then, notable progress related to the development of versatile electronic devices is discussed. Finally, future opportunities and the remaining challenges are examined. It is envisioned that more design concepts, working principles, and advanced papermaking techniques will be developed in the near future for the advanced functionalization of paper, paving the way for the mass production and commercial applications of flexible paper-based electronic devices.
Collapse
Affiliation(s)
- Yan Zhang
- Institute for Advanced Interdisciplinary Research, University of Jinan, Jinan, 250022, China
- School of Chemistry and Chemical Engineering, University of Jinan, Jinan, 250022, China
| | - Lina Zhang
- Shandong Provincial Key Laboratory of Preparation and Measurement of Building Materials, University of Jinan, Jinan, 250022, China
| | - Kang Cui
- School of Chemistry and Chemical Engineering, University of Jinan, Jinan, 250022, China
| | - Shenguang Ge
- Institute for Advanced Interdisciplinary Research, University of Jinan, Jinan, 250022, China
| | - Xin Cheng
- Shandong Provincial Key Laboratory of Preparation and Measurement of Building Materials, University of Jinan, Jinan, 250022, China
| | - Mei Yan
- School of Chemistry and Chemical Engineering, University of Jinan, Jinan, 250022, China
| | - Jinghua Yu
- School of Chemistry and Chemical Engineering, University of Jinan, Jinan, 250022, China
| | - Hong Liu
- Institute for Advanced Interdisciplinary Research, University of Jinan, Jinan, 250022, China
| |
Collapse
|
84
|
Sun Q, Qian B, Uto K, Chen J, Liu X, Minari T. Functional biomaterials towards flexible electronics and sensors. Biosens Bioelectron 2018; 119:237-251. [DOI: 10.1016/j.bios.2018.08.018] [Citation(s) in RCA: 96] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/18/2018] [Revised: 08/08/2018] [Accepted: 08/09/2018] [Indexed: 12/15/2022]
|
85
|
Tran TH, Nguyen HL, Hwang DS, Lee JY, Cha HG, Koo JM, Hwang SY, Park J, Oh DX. Five different chitin nanomaterials from identical source with different advantageous functions and performances. Carbohydr Polym 2018; 205:392-400. [PMID: 30446120 DOI: 10.1016/j.carbpol.2018.10.089] [Citation(s) in RCA: 34] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/03/2018] [Revised: 10/26/2018] [Accepted: 10/26/2018] [Indexed: 01/19/2023]
Abstract
Chitin is a renewable and sustainable biomass material that can be converted into various one-dimensional crystalline nanomaterials different in 1) length, 2) diameter, 3) charge density, 4) type of charge, and 5) crystallinity via diverse top-down synthetic methods. These nanomaterials have great potential as sustainable reinforcing and biologically functional materials. The proper design of chitin nanomaterials maximizes their performances in specific applications. Extensive efforts are devoted to understanding each type of chitin nanomaterial produced from different chitin sources; however, few studies have compared different chitin nanomaterials. Herein, we synthesize five different types of chitin nanomaterials from identical sources and compare their physical and chemical properties, including suitability for assorted purposes. Factors 1)-5) are discussed regarding their dominance in determining functionality depending on the specific goals of a) gas barriers, b) mechanical reinforcements, c) dispersibility in various pH aqueous buffers, d) thermal dimensional stability, and e) antibacterial activity. This study gives insights to design new chitin nanomaterial-based materials.
Collapse
Affiliation(s)
- Thang Hong Tran
- Research Center for Bio-Based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan 44429, Republic of Korea; Advanced Materials and Chemical Engineering, University of Science and Technology (UST), Daejeon 34113, Republic of Korea
| | - Hoang-Linh Nguyen
- Research Center for Bio-Based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan 44429, Republic of Korea; Environmental Science and Engineering, Pohang University of Science and Technology (POSTECH), Pohang 37673, Republic of Korea
| | - Dong Soo Hwang
- Environmental Science and Engineering, Pohang University of Science and Technology (POSTECH), Pohang 37673, Republic of Korea
| | - Ju Young Lee
- Research Center for Bio-Based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan 44429, Republic of Korea
| | - Hyun Gil Cha
- Research Center for Bio-Based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan 44429, Republic of Korea
| | - Jun Mo Koo
- Research Center for Bio-Based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan 44429, Republic of Korea
| | - Sung Yeon Hwang
- Research Center for Bio-Based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan 44429, Republic of Korea; Advanced Materials and Chemical Engineering, University of Science and Technology (UST), Daejeon 34113, Republic of Korea.
| | - Jeyoung Park
- Research Center for Bio-Based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan 44429, Republic of Korea; Advanced Materials and Chemical Engineering, University of Science and Technology (UST), Daejeon 34113, Republic of Korea.
| | - Dongyeop X Oh
- Research Center for Bio-Based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan 44429, Republic of Korea; Advanced Materials and Chemical Engineering, University of Science and Technology (UST), Daejeon 34113, Republic of Korea.
| |
Collapse
|
86
|
Wang Y, Gong S, Wang SJ, Yang X, Ling Y, Yap LW, Dong D, Simon GP, Cheng W. Standing Enokitake-like Nanowire Films for Highly Stretchable Elastronics. ACS NANO 2018; 12:9742-9749. [PMID: 30226045 DOI: 10.1021/acsnano.8b05019] [Citation(s) in RCA: 66] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Stretchable electronics may enable electronic components to be part of our organs-ideal for future wearable/implantable biodiagnostic systems. One of key challenges is failure of the soft/rigid material interface due to mismatching Young's moduli, which limits stretchability and durability of current systems. Here, we show that standing enokitake-like gold-nanowire-based films chemically bonded to an elastomer can be stretched up to 900% and are highly durable, with >93% conductivity recovery even after 2000 stretching/releasing cycles to 800% strain. Both experimental and modeling reveal that this superior elastic property originates from standing enokitake-like nanowire film structures. The closely packed nanoparticle layer sticks to the top of the nanowires, which easily cracks under strain, whereas the bottom part of the nanowires is compliant with substrate deformation. This leads to tiny V-shaped cracks with a maintained electron transport pathway rather than large U-shaped cracks that are frequently observed for conventional metal films. We further show that our standing nanowire films can serve as current collectors in supercapacitors and second skin-like smart masks for facial expression detection.
Collapse
Affiliation(s)
| | | | - Stephen J Wang
- Department of Innovation Design Engineering, School of Design , Royal College of Art , London SW7 2EU , United Kingdom
| | | | | | | | | | | | - Wenlong Cheng
- The Melbourne Centre for Nanofabrication , Clayton , Victoria 3800 , Australia
| |
Collapse
|
87
|
Ling S, Chen W, Fan Y, Zheng K, Jin K, Yu H, Buehler MJ, Kaplan DL. Biopolymer nanofibrils: structure, modeling, preparation, and applications. Prog Polym Sci 2018; 85:1-56. [PMID: 31915410 PMCID: PMC6948189 DOI: 10.1016/j.progpolymsci.2018.06.004] [Citation(s) in RCA: 168] [Impact Index Per Article: 28.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
Abstract
Biopolymer nanofibrils exhibit exceptional mechanical properties with a unique combination of strength and toughness, while also presenting biological functions that interact with the surrounding environment. These features of biopolymer nanofibrils profit from their hierarchical structures that spun angstrom to hundreds of nanometer scales. To maintain these unique structural features and to directly utilize these natural supramolecular assemblies, a variety of new methods have been developed to produce biopolymer nanofibrils. In particular, cellulose nanofibrils (CNFs), chitin nanofibrils (ChNFs), silk nanofibrils (SNFs) and collagen nanofibrils (CoNFs), as the four most abundant biopolymer nanofibrils on earth, have been the focus of research in recent years due to their renewable features, wide availability, low-cost, biocompatibility, and biodegradability. A series of top-down and bottom-up strategies have been accessed to exfoliate and regenerate these nanofibrils for versatile advanced applications. In this review, we first summarize the structures of biopolymer nanofibrils in nature and outline their related computational models with the aim of disclosing fundamental structure-property relationships in biological materials. Then, we discuss the underlying methods used for the preparation of CNFs, ChNFs, SNF and CoNFs, and discuss emerging applications for these biopolymer nanofibrils.
Collapse
Affiliation(s)
- Shengjie Ling
- School of Physical Science and Technology, ShanghaiTech University, Shanghai, 201210, China
- Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
- Department of Biomedical Engineering, Tufts University, Medford, MA, 02155, USA
| | - Wenshuai Chen
- Key Laboratory of Bio-based Material Science & Technology, Ministry of Education, Northeast Forestry University, Harbin, China
| | - Yimin Fan
- College of Chemical Engineering, Nanjing Forestry University, Nanjing, China
| | - Ke Zheng
- School of Physical Science and Technology, ShanghaiTech University, Shanghai, 201210, China
| | - Kai Jin
- Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
| | - Haipeng Yu
- Key Laboratory of Bio-based Material Science & Technology, Ministry of Education, Northeast Forestry University, Harbin, China
| | - Markus J. Buehler
- Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
| | - David L. Kaplan
- Department of Biomedical Engineering, Tufts University, Medford, MA, 02155, USA
| |
Collapse
|
88
|
Liu W, Ma R, Liu M, Wang H. Highly Stable In-Plane Microwave Magnetism in Flexible Li 0.35Zn 0.3Fe 2.35O 4(111) Epitaxial Thin Films for Wearable Devices. ACS APPLIED MATERIALS & INTERFACES 2018; 10:32331-32336. [PMID: 30187743 DOI: 10.1021/acsami.8b09984] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
With the advances in artificial intelligence and communication technologies, flexible microwave magnetic materials have become essential for flexible microwave detectors, wearable microwave sensors, and flexible spintronics. Here, a highly stable in-plane (IP) ferromagnetic resonance (FMR) and a tunable out-of-plane (OOP) FMR character are demonstrated in the flexible microwave magnetic Li0.35Zn0.3Fe2.35O4 (LZFO) (111) epitaxial thin films under external mechanical bending. Both the IP FMR line width and resonance field ( Hr) are basically unchanged when the sample was bent under an external tensile or compressive bending strain and deformation. However, the OOP FMR spectra (including Hr and absorption peak) could be tuned by mechanical bending, i.e., the LZFO sample possesses two OOP FMR absorption peaks at an external bending curvature. Meanwhile, excellent mechanical antifatigue and mechanical retention characteristics have also been obtained in the LZFO sample. The highly stable IP and the tunable OOP FMR spectra in the same LZFO sample with excellent mechanical antifatigue character have a promising prospect in microwave magnetic devices and flexible spintronics.
Collapse
Affiliation(s)
- Wenlong Liu
- School of Electronic and Information Engineering, State Key Laboratory for Mechanical Behavior of Materials , Xi'an Jiaotong University , Xi'an 710049 , China
| | - Rong Ma
- School of Electronic and Information Engineering, State Key Laboratory for Mechanical Behavior of Materials , Xi'an Jiaotong University , Xi'an 710049 , China
| | - Ming Liu
- School of Electronic and Information Engineering, State Key Laboratory for Mechanical Behavior of Materials , Xi'an Jiaotong University , Xi'an 710049 , China
| | - Hong Wang
- School of Electronic and Information Engineering, State Key Laboratory for Mechanical Behavior of Materials , Xi'an Jiaotong University , Xi'an 710049 , China
- Department of Materials Science and Engineering , Southern University of Science and Technology , Shenzhen 518055 , China
| |
Collapse
|
89
|
Fan YJ, Li X, Kuang SY, Zhang L, Chen YH, Liu L, Zhang K, Ma SW, Liang F, Wu T, Wang ZL, Zhu G. Highly Robust, Transparent, and Breathable Epidermal Electrode. ACS NANO 2018; 12:9326-9332. [PMID: 30118595 DOI: 10.1021/acsnano.8b04245] [Citation(s) in RCA: 63] [Impact Index Per Article: 10.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Recently emerged electronic skins with applications in on-body sensing and human-machine interfaces call for the development of high-performance skin-like electrodes. In this work, we report a highly robust, transparent, and breathable epidermal electrode composed of a scaffold-reinforced conductive nanonetwork (SRCN). Solution-dispersed Ag nanowires, through facile vacuum filtration, are embedded into a scaffold made of polyamide nanofibers. Optical transmittance of 84.9% at 550 nm wavelength is achieved at a significantly low sheet resistance of 8.2 Ω sq-1. The resistance of the SRCN only slightly increases by less than 0.1% after being bent for 3000 cycles at the maximum curvature of 300 m-1 and by less than 1.5% after being dipped in saline solution for 2500 cycles. The excellent robustness is attributed to the reinforcement from the nanofiber-based scaffold as a backbone that maintains the connections among the Ag nanowires by undertaking most of the loaded stress. The SRCN not only forms tight and conformal bonding with the target surface but also allows the evaporation of perspiration, making it suitable as an epidermal electrode for long-time use. Furthermore, fine and clean-cut circuit patterns with a line width on the micrometer scale can be readily prepared, paving the way for fabricating sophisticated functional electronic skins.
Collapse
Affiliation(s)
- You Jun Fan
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor , Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences , Beijing 100083 , China
- School of Nanoscience and Technology , University of Chinese Academy of Sciences , Beijing 100049 , China
- Institute of Semiconductors , Chinese Academy of Sciences , Beijing 100083 , China
| | - Xin Li
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor , Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences , Beijing 100083 , China
- School of Nanoscience and Technology , University of Chinese Academy of Sciences , Beijing 100049 , China
| | - Shuang Yang Kuang
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor , Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences , Beijing 100083 , China
- School of Nanoscience and Technology , University of Chinese Academy of Sciences , Beijing 100049 , China
| | - Lei Zhang
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor , Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences , Beijing 100083 , China
- Key Laboratory of Advanced Technologies of Materials (Ministry of Education), School of Materials Science and Engineering , Southwest Jiaotong University , Chengdu 610031 , China
| | - Yang Hui Chen
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor , Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences , Beijing 100083 , China
- School of Nanoscience and Technology , University of Chinese Academy of Sciences , Beijing 100049 , China
| | - Lu Liu
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor , Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences , Beijing 100083 , China
- School of Nanoscience and Technology , University of Chinese Academy of Sciences , Beijing 100049 , China
| | - Ke Zhang
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor , Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences , Beijing 100083 , China
- School of Nanoscience and Technology , University of Chinese Academy of Sciences , Beijing 100049 , China
| | - Si Wei Ma
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor , Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences , Beijing 100083 , China
- School of Nanoscience and Technology , University of Chinese Academy of Sciences , Beijing 100049 , China
| | - Fei Liang
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor , Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences , Beijing 100083 , China
- School of Nanoscience and Technology , University of Chinese Academy of Sciences , Beijing 100049 , China
| | - Tao Wu
- New Materials Institute , University of Nottingham Ningbo China , Ningbo 315100 , China
| | - Zhong Lin Wang
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor , Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences , Beijing 100083 , China
- School of Nanoscience and Technology , University of Chinese Academy of Sciences , Beijing 100049 , China
- School of Materials Science and Engineering , Georgia Institute of Technology , Atlanta , Georgia 30332 , United States
| | - Guang Zhu
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor , Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences , Beijing 100083 , China
- Department of Mechanical, Materials and Manufacturing Engineering , The University of Nottingham Ningbo China , Ningbo 315100 , China
| |
Collapse
|
90
|
Zhang H, Zhang P, Zhang H, Li X, Lei L, Chen L, Zheng Z, Yu Y. Universal Nature-Inspired and Amine-Promoted Metallization for Flexible Electronics and Supercapacitors. ACS APPLIED MATERIALS & INTERFACES 2018; 10:28963-28970. [PMID: 30080380 DOI: 10.1021/acsami.8b08014] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/21/2023]
Abstract
Economical and abundant natural biological materials provide a low-cost and scalable approach to develop next-generation flexible and wearable electronics. Herein, a universal strategy of nature-inspired and amine-promoted metallization, namely, NIAPM, is presented to make high-quality metals for electronics fabrication. The introduction of poly(ethyleneimine) (PEI) significantly shortens the time of metallization from >48 h to ≈6 h, and the phenol compounds (TP) from green tea make metals bond tightly on all demonstrated surfaces. The as-made thin metal films of Cu and Ni feature high conductivity (∼1.0 Ω/□), excellent mechanical stability and flexibility even at the bending radius of ∼1 mm. Moreover, NIAPM is compatible with typical lithography techniques for fabricating metallic patterns, showing considerable potential applications in flexible electronics. As a proof-of-concept, two devices based on melamine-templated Cu sponges are first prepared for detecting the change of external pressure with a resistance sensitivity of 18.1 kPa-1 and collecting high-viscosity crude oil, respectively. Then, a high-performance bendable solid supercapacitor is demonstrated using as-prepared Ni metallized fabrics and the activated porous carbon from the recycled waste in NIPAM as flexible electrodes, which possesses comparable areal capacitance of 45.5 F·g-1, and energy density of 7.88 Wh·g-1 at the power density of 35 W·g-1. Therefore, it is anticipated that such a time-saving, cost-effective and whole solution-processed NIAPM strategy can inspire further practical applications in the fields of surface chemistry, material science, flexible and wearable electronics, etc.
Collapse
Affiliation(s)
- Hua Zhang
- Key Laboratory of Synthetic and Natural Functional Molecule Chemistry of the Ministry of Education, College of Chemistry and Materials Science , Northwest University , Xi'an 710069 , China
| | - Ping Zhang
- Key Laboratory of Synthetic and Natural Functional Molecule Chemistry of the Ministry of Education, College of Chemistry and Materials Science , Northwest University , Xi'an 710069 , China
| | - Hanzhi Zhang
- Key Laboratory of Synthetic and Natural Functional Molecule Chemistry of the Ministry of Education, College of Chemistry and Materials Science , Northwest University , Xi'an 710069 , China
| | - Xiaohong Li
- Key Laboratory of Synthetic and Natural Functional Molecule Chemistry of the Ministry of Education, College of Chemistry and Materials Science , Northwest University , Xi'an 710069 , China
| | - Lin Lei
- Key Laboratory of Synthetic and Natural Functional Molecule Chemistry of the Ministry of Education, College of Chemistry and Materials Science , Northwest University , Xi'an 710069 , China
| | - Lina Chen
- Nanotechnology Center, Institute of Textiles and Clothing , The Hong Kong Polytechnic University , Hong Kong , 999077 , China
| | - Zijian Zheng
- Nanotechnology Center, Institute of Textiles and Clothing , The Hong Kong Polytechnic University , Hong Kong , 999077 , China
| | - You Yu
- Key Laboratory of Synthetic and Natural Functional Molecule Chemistry of the Ministry of Education, College of Chemistry and Materials Science , Northwest University , Xi'an 710069 , China
| |
Collapse
|
91
|
|
92
|
Aksoy Ö, Uzun İ, Topal G, Ocak YS, Çelik Ö, Batibay D. Synthesis, characterization, and Schottky diode applications of low-cost new chitin derivatives. Polym Bull (Berl) 2018. [DOI: 10.1007/s00289-017-2151-7] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
93
|
Xu H, Fang Z, Tian W, Wang Y, Ye Q, Zhang L, Cai J. Green Fabrication of Amphiphilic Quaternized β-Chitin Derivatives with Excellent Biocompatibility and Antibacterial Activities for Wound Healing. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2018; 30:e1801100. [PMID: 29845657 DOI: 10.1002/adma.201801100] [Citation(s) in RCA: 191] [Impact Index Per Article: 31.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/14/2018] [Revised: 03/23/2018] [Indexed: 06/08/2023]
Abstract
Bacterial infection has always been a great threat to public health, and new antimicrobials to combat it are urgently needed. Here, a series of quaternized β-chitin derivatives is prepared simply and homogeneously in an aqueous KOH/urea solution, which is a high-efficiency, energy-saving, and "green" route for the modification of chitin. The mild reaction conditions keep the acetamido groups of β-chitin intact and introduce quaternary ammonium groups on the primary hydroxyl at the C-6 position of the chitin backbone, allowing the quaternized β-chitin derivatives (QCs) to easily form micelles. These QCs are found to exhibit excellent antimicrobial activities against Escherichia coli, Staphylococcus aureus, Candida albicans, and Rhizopus oryzae with minimum inhibitory concentrations (MICs) of 8, 12, 60, and 40 µg mL-1 , respectively. As a specific highlight, their inherent outstanding biocompatibility and significant accelerating effects on the healing of uninfected, E. coli-infected, and S. aureus-infected wounds imply that these novel polysaccharide-based materials can be used as dressings for clinical skin regeneration, particularly for infected wounds.
Collapse
Affiliation(s)
- Huan Xu
- College of Chemistry & Molecular Sciences, Wuhan University, Wuhan, 430072, P. R. China
| | - Zehong Fang
- Zhongnan Hospital of Wuhan University, Institute of Hepatobiliary Diseases of Wuhan University, Transplant Center of Wuhan University, Hubei Key Laboratory of Medical Technology on Transplantation, Wuhan, 430071, P. R. China
| | - Weiqun Tian
- School of Basic Medical Sciences, Wuhan University, Wuhan, 430071, P. R. China
| | - Yanfeng Wang
- Zhongnan Hospital of Wuhan University, Institute of Hepatobiliary Diseases of Wuhan University, Transplant Center of Wuhan University, Hubei Key Laboratory of Medical Technology on Transplantation, Wuhan, 430071, P. R. China
| | - Qifa Ye
- Zhongnan Hospital of Wuhan University, Institute of Hepatobiliary Diseases of Wuhan University, Transplant Center of Wuhan University, Hubei Key Laboratory of Medical Technology on Transplantation, Wuhan, 430071, P. R. China
| | - Lina Zhang
- College of Chemistry & Molecular Sciences, Wuhan University, Wuhan, 430072, P. R. China
| | - Jie Cai
- College of Chemistry & Molecular Sciences, Wuhan University, Wuhan, 430072, P. R. China
- Research Institute of Shenzhen, Wuhan University, Shenzhen, 518057, P. R. China
| |
Collapse
|
94
|
Rullyani C, Sung CF, Lin HC, Chu CW. Flexible Organic Thin Film Transistors Incorporating a Biodegradable CO 2-Based Polymer as the Substrate and Dielectric Material. Sci Rep 2018; 8:8146. [PMID: 29802298 PMCID: PMC5970150 DOI: 10.1038/s41598-018-26585-0] [Citation(s) in RCA: 22] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/12/2018] [Accepted: 05/15/2018] [Indexed: 01/19/2023] Open
Abstract
Employing CO2-based polymer in electronic applications should boost the consumption of CO2 feedstocks and provide the potential for non-permanent CO2 storage. In this study, polypropylene carbonate (PPC) is utilized as a dielectric and substrate material for organic thin film transistors (OTFTs) and organic inverter. The PPC dielectric film exhibits a surface energy of 47 mN m−1, a dielectric constant of 3, a leakage current density of less than 10−6 A cm−2, and excellent compatibility with pentacene and PTCDI-C8 organic semiconductors. Bottom-gate top-contact OTFTs are fabricated using PPC as a dielectric; they exhibits good electrical performance at an operating voltage of 60 V, with electron and hole mobilities of 0.14 and 0.026 cm2 V−1 s−1, and on-to-off ratios of 105 and 103, respectively. The fabricated p- and n-type transistors were connected to form a complementary inverter that operated at supply voltages of 20 V with high and low noise margins of 85 and 69%, respectively. The suitability of PPC as a substrate is demonstrated through the preparation of PPC sheets by casting method. The fabricated PPC sheets has a transparency of 92% and acceptable mechanical properties, yet they biodegraded rapidly through enzymatic degradation when using the lipase from Rhizhopus oryzae.
Collapse
Affiliation(s)
- Cut Rullyani
- Department of Materials Science and Engineering, National Chiao Tung University, Hsinchu, 300, Taiwan (ROC)
| | - Chao-Feng Sung
- Department of Photonics and Display Institute, National Chiao Tung University, Hsinchu, 300, Taiwan (ROC)
| | - Hong-Cheu Lin
- Department of Materials Science and Engineering, National Chiao Tung University, Hsinchu, 300, Taiwan (ROC).
| | - Chih-Wei Chu
- Research Center for Applied Science Academia Sinica, Taipei, 115, Taiwan (ROC). .,College of Engineering, Chang Gung University, Taoyuan, 333, Taiwan (ROC).
| |
Collapse
|
95
|
Chen G, Matsuhisa N, Liu Z, Qi D, Cai P, Jiang Y, Wan C, Cui Y, Leow WR, Liu Z, Gong S, Zhang KQ, Cheng Y, Chen X. Plasticizing Silk Protein for On-Skin Stretchable Electrodes. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2018; 30:e1800129. [PMID: 29603437 DOI: 10.1002/adma.201800129] [Citation(s) in RCA: 129] [Impact Index Per Article: 21.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/05/2018] [Revised: 02/07/2018] [Indexed: 05/18/2023]
Abstract
Soft and stretchable electronic devices are important in wearable and implantable applications because of the high skin conformability. Due to the natural biocompatibility and biodegradability, silk protein is one of the ideal platforms for wearable electronic devices. However, the realization of skin-conformable electronic devices based on silk has been limited by the mechanical mismatch with skin, and the difficulty in integrating stretchable electronics. Here, silk protein is used as the substrate for soft and stretchable on-skin electronics. The original high Young's modulus (5-12 GPa) and low stretchability (<20%) are tuned into 0.1-2 MPa and > 400%, respectively. This plasticization is realized by the addition of CaCl2 and ambient hydration, whose mechanism is further investigated by molecular dynamics simulations. Moreover, highly stretchable (>100%) electrodes are obtained by the thin-film metallization and the formation of wrinkled structures after ambient hydration. Finally, the plasticized silk electrodes, with the high electrical performance and skin conformability, achieve on-skin electrophysiological recording comparable to that by commercial gel electrodes. The proposed skin-conformable electronics based on biomaterials will pave the way for the harmonized integration of electronics into human.
Collapse
Affiliation(s)
- Geng Chen
- Innovative Centre for Flexible Devices (iFLEX), School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798, Singapore
| | - Naoji Matsuhisa
- Innovative Centre for Flexible Devices (iFLEX), School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798, Singapore
| | - Zhiyuan Liu
- Innovative Centre for Flexible Devices (iFLEX), School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798, Singapore
| | - Dianpeng Qi
- Innovative Centre for Flexible Devices (iFLEX), School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798, Singapore
| | - Pingqiang Cai
- Innovative Centre for Flexible Devices (iFLEX), School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798, Singapore
| | - Ying Jiang
- Innovative Centre for Flexible Devices (iFLEX), School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798, Singapore
| | - Changjin Wan
- Innovative Centre for Flexible Devices (iFLEX), School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798, Singapore
| | - Yajing Cui
- Innovative Centre for Flexible Devices (iFLEX), School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798, Singapore
| | - Wan Ru Leow
- Innovative Centre for Flexible Devices (iFLEX), School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798, Singapore
| | - Zhuangjian Liu
- Institute of High Performance Computing, Agency for Science, Technology and Research (A*STAR), 1 Fusionopolis Way, #16-16 Connexis North, 138632, Singapore
| | - Suxuan Gong
- Procter and Gamble, Singapore Innovation Center, 70 Biopolis Street, 138547, Singapore
| | - Ke-Qin Zhang
- National Engineering Laboratory for Modern Silk, College of Textile and Clothing Engineering, Soochow University, Suzhou, 215123, China
| | - Yuan Cheng
- Institute of High Performance Computing, Agency for Science, Technology and Research (A*STAR), 1 Fusionopolis Way, #16-16 Connexis North, 138632, Singapore
| | - Xiaodong Chen
- Innovative Centre for Flexible Devices (iFLEX), School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798, Singapore
| |
Collapse
|
96
|
Jung HS, Kim MH, Shin JY, Park SR, Jung JY, Park WH. Electrospinning and wound healing activity of β-chitin extracted from cuttlefish bone. Carbohydr Polym 2018; 193:205-211. [PMID: 29773374 DOI: 10.1016/j.carbpol.2018.03.100] [Citation(s) in RCA: 52] [Impact Index Per Article: 8.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/31/2017] [Revised: 03/27/2018] [Accepted: 03/30/2018] [Indexed: 01/05/2023]
Abstract
A nanofibrous β-chitin web was fabricated via electrospinning for use as a novel wound dressing material. β-chitin was extracted from cuttlefish bone using deproteinization and demineralization. First, cuttlefish bone was alkali-treated to remove the proteins and was then treated with the acid for demineralization. The extracted β-chitin was dissolved in formic acid as solvent to evaluate its electrospinnability, and the electrospinnability increased remarkably when β-chitin was blended with poly(ethylene oxide) (PEO) than without. The blended β-chitin/PEO nanofibers had a fiber diameter of about 400 nm, and the diameter decreased after soaking in water to remove the PEO. The structural and physical properties of the β-chitin material and its nanofibers were characterized using Attenuated total reflectance infrared spectroscopy (ATR-IR), Proton nuclear magnetic resonance (1H NMR), Scanning electron microscopy/Energy dispersive spectroscopy (SEM/EDS), X-ray diffraction (XRD), texturometry, viscometry and contact angle measurements, and an animal test was conducted to investigate the wound healing effect. The β-chitin nanofibers were found to have great potential as nanomaterials for wound healing.
Collapse
Affiliation(s)
- Hyeong-Seop Jung
- Department of Advanced Organic Materials and Textile Engineering System, Chungnam National University, Daejeon, 34134, South Korea
| | - Min Hee Kim
- Department of Advanced Organic Materials and Textile Engineering System, Chungnam National University, Daejeon, 34134, South Korea
| | - Ji Youn Shin
- Department of Advanced Organic Materials and Textile Engineering System, Chungnam National University, Daejeon, 34134, South Korea
| | - Se Ra Park
- Department of Veterinary Medicine, Chungnam National University, Daejeon, 43134, South Korea
| | - Ju-Young Jung
- Department of Veterinary Medicine, Chungnam National University, Daejeon, 43134, South Korea.
| | - Won Ho Park
- Department of Advanced Organic Materials and Textile Engineering System, Chungnam National University, Daejeon, 34134, South Korea.
| |
Collapse
|
97
|
Wang Q, Yan X, Chang Y, Ren L, Zhou J. Fabrication and characterization of chitin nanofibers through esterification and ultrasound treatment. Carbohydr Polym 2018; 180:81-87. [DOI: 10.1016/j.carbpol.2017.09.010] [Citation(s) in RCA: 35] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/26/2017] [Revised: 09/02/2017] [Accepted: 09/05/2017] [Indexed: 10/18/2022]
|
98
|
Lee D, Lim YW, Im HG, Jeong S, Ji S, Kim YH, Choi GM, Park JU, Lee JY, Jin J, Bae BS. Bioinspired Transparent Laminated Composite Film for Flexible Green Optoelectronics. ACS APPLIED MATERIALS & INTERFACES 2017; 9:24161-24168. [PMID: 28656756 DOI: 10.1021/acsami.7b03126] [Citation(s) in RCA: 24] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
Herein, we report a new version of a bioinspired chitin nanofiber (ChNF) transparent laminated composite film (HCLaminate) made of siloxane hybrid materials (hybrimers) reinforced with ChNFs, which mimics the nanofiber-matrix structure of hierarchical biocomposites. Our HCLaminate is produced via vacuum bag compressing and subsequent UV-curing of the matrix resin-impregnated ChNF transparent paper (ChNF paper). It is worthwhile to note that this new type of ChNF-based transparent substrate film retains the strengths of the original ChNF paper and compensates for ChNF paper's drawbacks as a flexible transparent substrate. As a result, compared with high-performance synthetic plastic films, such as poly(ethylene terephthalate), poly(ether sulfone), poly(ethylene naphthalate), and polyimide, our HCLaminate is characterized to exhibit extremely smooth surface topography, outstanding optical clarity, high elastic modulus, high dimensional stability, etc. To prove our HCLaminate as a substrate film, we use it to fabricate flexible perovskite solar cells and a touch-screen panel. As far as we know, this work is the first to demonstrate flexible optoelectronics, such as flexible perovskite solar cells and a touch-screen panel, actually fabricated on a composite film made of ChNF. Given its desirable macroscopic properties, we envision our HCLaminate being utilized as a transparent substrate film for flexible green optoelectronics.
Collapse
Affiliation(s)
| | | | | | | | - Sangyoon Ji
- School of Materials Science and Engineering, Wearable Electronics Research Group, Ulsan National Institute of Science and Technology (UNIST) , 50 UNIST-gil, Eonyang-eup, Ulju-gun, Ulsan 44919, Republic of Korea
| | | | | | - Jang-Ung Park
- School of Materials Science and Engineering, Wearable Electronics Research Group, Ulsan National Institute of Science and Technology (UNIST) , 50 UNIST-gil, Eonyang-eup, Ulju-gun, Ulsan 44919, Republic of Korea
| | | | - Jungho Jin
- School of Materials Science and Engineering, University of Ulsan , 93 Daehak-ro, Nam-gu, Ulsan 44610, Republic of Korea
| | | |
Collapse
|
99
|
Huang GW, Li N, Xiao HM, Feng QP, Fu SY. A paper-based touch sensor with an embedded micro-probe array fabricated by double-sided laser printing. NANOSCALE 2017; 9:9598-9605. [PMID: 28665426 DOI: 10.1039/c7nr02469j] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
Touch sensor is one of the key components for human interfacing devices. However, although various touch sensors have been demonstrated, their sophisticated fabrication processes and complicated structures make them expensive and delicate, and thus they are not considered to be practical for wide application in daily life. Herein, we present a low-cost and scalable paper-based touch sensor suitable for practical applications. The sensor is based on the novel structure of embedded silver nanowire micro-probe arrays in a paper substrate, which exhibits high sensitivity to multiple touch inputs and compact structure with a total thickness of ca. 100 μm. Silver nanowire electrodes on two sides are manufactured at the same time via an original double-sided laser printing technique. Since this technique is mask-free, solvent-free and highly efficient, it is very suitable for paper substrates that cannot endure solvent processing. The sensing properties of the sensor in various extreme situations are examined and the spatial distributions of touch pressure are detected by arranging the sensing units in arrays. Demonstration examples of the touch sensor and pressure mapping are presented, and finally, the successful application of the sensor array in an electronic lock system is shown to further illustrate its applicability.
Collapse
Affiliation(s)
- Gui-Wen Huang
- Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, No. 29 Zhongguancun East Road, Beijing 100190, P. R. China.
| | | | | | | | | |
Collapse
|
100
|
Kim JK, Kim DH, Joo SH, Choi B, Cha A, Kim KM, Kwon TH, Kwak SK, Kang SJ, Jin J. Hierarchical Chitin Fibers with Aligned Nanofibrillar Architectures: A Nonwoven-Mat Separator for Lithium Metal Batteries. ACS NANO 2017; 11:6114-6121. [PMID: 28505417 DOI: 10.1021/acsnano.7b02085] [Citation(s) in RCA: 31] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/24/2023]
Abstract
Here, we introduce regenerated fibers of chitin (Chiber), the second most abundant biopolymer after cellulose, and propose its utility as a nonwoven fiber separator for lithium metal batteries (LMBs) that exhibits an excellent electrolyte-uptaking capability and Li-dendrite-mitigating performance. Chiber is produced by a centrifugal jet-spinning technique, which allows a simple and fast production of Chibers consisting of hierarchically aligned self-assembled chitin nanofibers. Following the scrutinization on the Chiber-Li-ion interaction via computational methods, we demonstrate the potential of Chiber as a nonwoven mat-type separator by monitoring it in Li-O2 and Na-O2 cells.
Collapse
Affiliation(s)
- Joong-Kwon Kim
- School of Materials Science and Engineering, University of Ulsan , Ulsan Metropolitan City 44610, Republic of Korea
| | | | | | - Byeongwook Choi
- School of Materials Science and Engineering, University of Ulsan , Ulsan Metropolitan City 44610, Republic of Korea
| | | | | | | | | | | | - Jungho Jin
- School of Materials Science and Engineering, University of Ulsan , Ulsan Metropolitan City 44610, Republic of Korea
| |
Collapse
|