Layered Structure Causes Bulk NiFe Layered Double Hydroxide Unstable in Alkaline Oxygen Evolution Reaction

Lattice Strain Mediated Reversible Reconstruction in CoMoO4·0.69H2O for Intermittent Oxygen Evolution

A heterogeneous interface usually plays a versatile role in modulating catalysis and the durability of hybrid electrocatalysts for oxygen evolution reaction (OER), and its intrinsic mechanism is still in dispute due to an uncertain correlation of initial, intermediate and active phases. In this article, the CoMoO₄·0.69H₂O/Co₃O₄ heterogeneous interface is configured to understand the evolution kinetics of these correlated phases. Due to the chemically and electrochemically "inert" character of Co₃O₄ support, lattice strain with 3.31% tuning magnitude in primary CoMoO₄·0.69H₂O can be inherited after spontaneous dissolution of molybdenum cations in electrolyte, dominating catalytic activity of the reconstructed CoOOH. In situ Raman spectroscopy demonstrates reversible conversion between active CoOOH and amorphous cobalt oxide during OER when positive and negative potentials are sequentially supplied onto hybrid catalysts with favorable strain. Therefore, superior durability with negligible decay after 10 cycles is experimentally identified for intermittent oxygen evolution. Theoretical calculations indicate that appropriate stress within the electrocatalyst could reduce the reaction energy barrier and enhance the OER performance by optimizing the adsorption of intermediates.

Engineering cation vacancies in high-entropy layered double hydroxides for boosting the oxygen evolution reaction

High-entropy layered double hydroxides (HE-LDHs) are emerging as promising electrocatalysts towards the OER due to their high-entropy effect and the cocktail effect. However, the catalytic activity and stability of HE-LDHs is, as yet, unsatisfactory. Herein, we designed FeCoNiCuZn LDHs with rich cation vacancies, which need only low overpotentials of 227, 275 and 293 mV to reach 10, 100 and 200 mA cm^-2, respectively, and show almost no decay up to 200 h at 200 mA cm^-2. DFT calculations validate that the cation vacancies can boost the intrinsic activity of HE-LDHs through optimizing the adsorption energy of OER intermediates.

Demonstrating the source of inherent instability in NiFe LDH-based OER electrocatalysts

Nickel-iron layered double hydroxides are known to be one of the most highly active catalysts for the oxygen evolution reaction in alkaline conditions. The high electrocatalytic activity of the material however cannot be sustained within the active voltage window on timescales consistent with commercial requirements. The goal of this work is to identify and prove the source of inherent catalyst instability by tracking changes in the material during OER activity. By combining in situ and ex situ Raman analyses we elucidate long-term effects on the catalyst performance from a changing crystallographic phase. In particular, we attribute electrochemically stimulated compositional degradation at active sites as the principal cause of the sharp loss of activity from NiFe LDHs shortly after the alkaline cell is turned on. EDX, XPS, and EELS analyses performed after OER also reveal noticeable leaching of Fe metals compared to Ni, principally from highly active edge sites. In addition, post-cycle analysis identified a ferrihydrite by-product formed from the leached Fe. Density functional theory calculations shed light on the thermodynamic driving force for the leaching of Fe metals and propose a dissolution pathway which involves [FeO₄]^2- removal at relevant OER potentials.

Novel hierarchical carbon microspheres@layered double hydroxides@copper lignosulfonate architecture for polypropylene with enhanced flame retardant and mechanical performances

Due to the inherent defect of flammability of polypropylene (PP), a novel and highly efficient carbon microspheres@layered double hydroxides@copper lignosulfonate (CMSs@LDHs@CLS) flame retardant was designed and prepared, which was attributed to the strong electrostatic interaction between carbon microspheres (CMSs), layered double hydroxides (LDHs) and lignosulfonate as well as the chelation effect of lignosulfonate on copper ions, and then it was incorporated into the PP matrix. Significantly, CMSs@LDHs@CLS not only observably improved its dispersibility in PP matrix, but also simultaneously achieved excellent flame retardant properties for composites. With the addition of 20.0 % CMSs@LDHs@CLS, the limit oxygen index of CMSs@LDHs@CLS and PP composites (PP/CMSs@LDHs@CLS) reached 29.3 % and achieved the UL-94 V-0 rating. Cone calorimeter tests indicated that the peak heat release rate, total heat release and total smoke production of PP/CMSs@LDHs@CLS composites exhibited declines of 28.8 %, 29.2 % and 11.5 %, respectively, compared with those of PP/CMSs@LDHs composites. These advancements were attributed to the better dispersibility of CMSs@LDHs@CLS in PP matrix and illustrated that CMSs@LDHs@CLS observably reduced fire hazards of PP. The flame retardant property of CMSs@LDHs@CLS might relate to condensed phase flame retardant effect of char layer and catalytic charring of copper oxides.

Synthesis of Hollow Leaf-Shaped Iron-Doped Nickel–Cobalt Layered Double Hydroxides Using Two-Dimensional (2D) Zeolitic Imidazolate Framework Catalyzing Oxygen Evolution Reaction

Layered double hydroxides (LDHs) have been reported as one of the most effective materials for oxygen evolution reaction (OER) catalysts, which are prone to hydrolysis and oxidation under OER conditions. Metal–organic frameworks (MOFs) are porous materials with high crystallinity and internal surface area. The design of LDHs based on MOFs has attracted increasing attention owing to their high surface area, exposed catalysis sites, and fast charge/mass transport kinetics. Herein, we report a novel approach to fabricate a leaf-shaped iron-doped nickel–cobalt LDH (L-Fe-NiCoLDH) derived from a two-dimensional (2D) zeolitic imidazolate framework with a leaf-like morphology (ZIFL). Iron doping played a significant role in enhancing the specific surface area, affecting the OER performance. L-Fe-NiCoLDH showed high OER performance with an overpotential of 243 mV at 10 mA cm−2 and high durability after 20 h. The design of LDHs based on the leaf morphology of MOFs offers tremendous potential for improving OER efficiency.

Non-Kinetic Effects Convolute Activity and Tafel Analysis for the Alkaline Oxygen Evolution Reaction on NiFeOOH Electrocatalysts

A large variety of nickel-based catalysts has been investigated for the oxygen evolution reaction (OER) in alkaline media. However, their reported activity, as well as Tafel slope values, vary greatly. To understand this variation, we studied electrodeposited Ni₈₀ Fe₂₀ OOH catalysts with different loadings at varying rotation rates, hydroxide concentrations, with or without sonication. We show that, at low current density (<5 mA cm^-2 ), the Tafel slope value is ≈30 mV dec^-1 for Ni₈₀ Fe₂₀ OOH. At higher polarization, the Tafel slope continuously increases and is dependent on rotation rate, loading, hydroxide concentration and sonication. These Tafel slope values are convoluted by non-kinetic effects, such as bubbles, potential-dependent changes in ohmic resistance and (internal) OH^- gradients. As best practise, we suggest that Tafel slopes should be plotted vs. current or potential. In such a plot, it can be appreciated if there is a kinetic Tafel slope or if the observed Tafel slope is influenced by non-kinetic effects.

Regulating the Synergistic Effect in Bimetallic Two-Dimensional Polymer Oxygen Evolution Reaction Catalysts by Adjusting the Coupling Strength Between Metal Centers

Bimetallic electrocatalysts with its superior performance has a broad application prospect in oxygen evolution reaction (OER), but the fundamental understanding of the mechanism of synergistic effect is still limited since there lacks a practical way to decouple the influence factors on the intrinsic activity of active sites from others. Herein, a series of bimetallic Co-Ni two-dimensional polymer (2DP) model OER catalysts with well-defined architecture, monolayer characteristic, were designed and synthesized to explore the influence of the coupling strength between metal centers on OER performance. The coupling strength was regulated by adjusting the spacing between metal centers or the conjugation degree of bridge skeleton. Among the examined 2DPs, CoTAPP-Ni-MF-2DP, which has the strongest coupling strength between metal centers exhibited the best OER performance. These model systems can help to explore the precise structure-performance relationships, which is important for the rational catalyst design at the atomic/molecular levels.

High Current Density Oxygen Evolution in Carbonate Buffered Solution Achieved by Active Site Densification and Electrolyte Engineering

High current density reaching 1 A cm^-2 for efficient oxygen evolution reaction (OER) was demonstrated by interactively optimizing electrolyte and electrode at non-extreme pH levels. Careful electrolyte assessment revealed that the state-of-the-art nickel-iron oxide electrocatalyst in alkaline solution maintained its high OER performance with a small Tafel slope in K-carbonate solution at pH 10.5 at 353 K. The OER performance was improved when Cu or Au was introduced into the FeO_x -modified nanostructured Ni electrode as the third element during the preparation of electrode by electrodeposition. The resultant OER achieved 1 A cm^-2 at 1.53 V vs. reversible hydrogen electrode (RHE) stably for 90 h, comparable to those in extreme alkaline conditions. Constant Tafel slopes, apparent activation energy, and the same signatures from operando X-ray absorption spectroscopy among these samples suggested that this improvement seems solely correlated with enhanced electrochemical surface area caused by adding the third element.

Ultrafast Combustion Synthesis of Robust and Efficient Electrocatalysts for High-Current-Density Water Oxidation

The scalable production of inexpensive, efficient, and robust catalysts for oxygen evolution reaction (OER) that can deliver high current densities at low potentials is critical for the industrial implementation of water splitting technology. Herein, a series of metal oxides coupled with Fe2O3 are in situ grown on iron foam massively via an ultrafast combustion approach for a few seconds. Benefiting from the three-dimensional nanosheet array framework and the heterojunction structure, the self-supporting electrodes with abundant active centers can regulate mass transport and electronic structure for prompting OER activity at high current density. The optimized Ni(OH)2/Fe2O3 with robust structure can deliver a high current density of 1000 mA cm-2 at the overpotential as low as 271 mV in 1.0 M KOH for up to 1500 h. Theoretical calculation demonstrates that the strong electronic modulation plays a crucial part in the hybrid by optimizing the adsorption energy of the intermediate, thereby enhancing the efficiency of oxygen evolution. This work proposes a method to construct cheap and robust catalysts for practical application in energy conversion and storage.

P-Mediated Cu-N4 Sites in Carbon Nitride Realizing CO2 Photoreduction to C2 H4 with Selectivity Modulation

Photocatalytic CO₂ reduction to high value-added C₂ products (e.g., C₂ H₄ ) is of considerable interest but challenging. The C₂ H₄ product selectivity strongly hinges on the intermediate energy levels in the CO₂ reduction pathway. Herein, Cu-N₄ sites anchored phosphorus-modulated carbon nitride (CuACs/PCN) is designed as a photocatalyst to tailor the intermediate energy levels in the the C₂ H₄ formation reaction pathway for realizing its high production with tunable selectivity. Theoretical calculations combined with experimental data demonstrate that the formation of the C-C coupling intermediates can be realized on Cu-N₄ sites and the surrounding doped P facilitates the production of C₂ H₄ . Thus, CuACs/PCN exhibits a high C₂ H₄ selectivity of 53.2% with a yielding rate of 30.51 µmol g^-1 . The findings reveal the significant role of the coordination environment and surrounding microenvironment of Cu single atoms in C₂ H₄ formation and offer an effective approach for highly selective CO₂ photoreduction to produce C₂ H₄ .

Tuning the d-Band States of Ni-Based Serpentine Materials via Fe3+ Doping for Efficient Oxygen Evolution Reaction

The serpentine germanate materials are promising oxygen evolution reaction (OER) electrocatalysts due to their unique layered crystal structure and electronic structure. However, the catalytic activities still need to be improved to satisfy the practical applications. Adjusting the d-band center of metal active site to balance the adsorption and desorption of intermediates is considered an effective approach to improve the OER activity. In this work, an element dopant strategy was proposed to optimize the d-band state of Ni₃Ge₂O₅(OH)₄ serpentine to improve the OER activity. The density functional theory calculations revealed that Fe³⁺ doping increased the d-band center of the Ni₃Ge₂O₅(OH)₄ serpentine, which optimized the adsorption strength of intermediates on surface Ni and Fe atoms so that the Fe³⁺ doped Ni₃Ge₂O₅(OH)₄ (Ni_2.25Fe_0.75Ge₂O₅(OH)₄) exhibited much reduced Gibbs free energy changes in the rate-determining step compared with pristine serpentine. Inspired by the theoretical calculations, the Ni_xFe_3-xGe₂O₅(OH)₄ nanosheets with different amounts of doped Fe³⁺ were designed and synthesized. The structural characterizations indicated that Fe³⁺ was successfully doped into Ni₃Ge₂O₅(OH)₄ and replaced the Ni²⁺. The Fe³⁺ doped Ni_xFe_3-xGe₂O₅(OH)₄ nanosheets showed greatly improved OER activity than Ni₃Ge₂O₅(OH)₄ and Fe₃Ge₂O₅(OH)₄. Further electrochemical analysis illustrated that Fe³⁺ doping reduced the adsorptive/formative resistance of intermediates and the charge transfer resistance and facilitated the kinetic process of OER. The in situ Raman spectra indicated that the Fe³⁺ doped Ni₃Ge₂O₅(OH)₄ possesses a more active Ni-O bond than pristine Ni₃Ge₂O₅(OH)₄. This work provides an effective strategy to tune the d-band center of serpentines for efficient electrocatalytic OER.

Identifying the geometric catalytic active sites of crystalline cobalt oxyhydroxides for oxygen evolution reaction

Unraveling the precise location and nature of active sites is of paramount significance for the understanding of the catalytic mechanism and the rational design of efficient electrocatalysts. Here, we use well-defined crystalline cobalt oxyhydroxides CoOOH nanorods and nanosheets as model catalysts to investigate the geometric catalytic active sites. The morphology-dependent analysis reveals a ~50 times higher specific activity of CoOOH nanorods than that of CoOOH nanosheets. Furthermore, we disclose a linear correlation of catalytic activities with their lateral surface areas, suggesting that the active sites are exclusively located at lateral facets rather than basal facets. Theoretical calculations show that the coordinatively unsaturated cobalt sites of lateral facets upshift the O 2p-band center closer to the Fermi level, thereby enhancing the covalency of Co-O bonds to yield the reactivity. This work elucidates the geometrical catalytic active sites and enlightens the design strategy of surface engineering for efficient OER catalysts.

While cobalt-based electrocatalysts demonstrate promising performances for oxygen evolution, active site identification is complicated by concurrent structural changes. Here, authors examine crystalline, well-defined cobalt oxyhydroxide nanomaterials and identify the geometric active sites.

Ultrafast construction of 3D ultrathin NiCo-LDH@Cu heteronanosheet array by plasma magnetron sputtering for non-enzymatic glucose sensing in beverage and human serum

In this work, a 3D ultra-thin NiCo-LDH nanosheet array coated Cu nanoparticles on carbon cloth (NiCo-LDH@Cu NSA/CC) was ultrafast synthesized by plasma magnetron sputtering for the first time. This method has low toxicity and is easy to operate. As a durable and efficient 3D heteronanoarray electrocatalyst for glucose detection, NiCo-LDH@Cu NSA/CC has higher stable conductivity and faster electron transport rate than NiCo-LDH NSA/CC and Cu nanoparticles, which work through synergistic effect to form a high-performance sensing platform. The NiCo-LDH@Cu NSA/CC heteronanosheet structure has good electrocatalytic performance for glucose oxidation, with the sensitivity of the two linear ranges (0.001-1 mmol L^-1 and 1-6 mmol L^-1) being 9710 μA L mmol^-1 cm^-2 and 4870 μA L mmol^-1 cm^-2, respectively, and the detection limit (LOD) is 157 nmol L^-1 (S/N = 3). The sensor has been successfully applied to detect glucose in beverages and serum.

Mesoporous LDH Metastructure from Multiscale Assembly of Defective Nanodomains by Laser Shock for Oxygen Evolution Reaction

Laser is a powerful tool for the synthesis of nanomaterials. The intensive laser pulses delivered to materials within nanoseconds allow the formation of novel structures that are inaccessible for conventional methods. Layered double hydroxide (LDH) nanostructures with high porosity, suitable dopants, and rich defects are desirable for catalysts, however, tremendously difficult in a one-pot synthesis. Here it is found that confined laser shock in solvent leads to the formation of nanoreactors which guide the assembly of multiscale LDH building units, larger nanosheets as frame and smaller nanodomains as building blocks. These nanodomains have rich vacancy defects and are interlocked in a high packed density of 10¹³  cm^-2 , leaving rich mesopores across the nanosheets and coral-like morphology. Like the natural coral reef that has multiscale structure to accommodate different marine organisms, the coral-like LDH metastructure provides large surface area and rich active sites for the interaction with guest molecules. Benefiting from the multiscale porous structure and rational dopant, this LDH catalyst exhibits a low overpotential of 220 mV at 10 mA cm^-2 for oxygen evolution reaction (OER), standing as one of the best LDH catalysts to date.

Defect and Interface Engineering of Three-Dimensional Open Nanonetcage Electrocatalysts for Advanced Electrocatalytic Oxygen Evolution Reaction

Defect engineering and interface engineering are two efficient approaches to promote the electrocatalytic performance of transition metal oxides (TMOs) by modulating the local electronic structure and inducing a synergistic effect but usually require costly and complicated processes. Herein, a facile electrochemical etching method is proposed for the controllable tailoring of the defects in a three-dimensional (3D) open nanonetcage CoZnRuO_x heterostructure via the in situ electrochemical etching to remove partial ZnO. The highly open 3D nanostructures, numerous defects, and multicomponent heterointerfaces endow the CoZnRuO_x nanonetcages with more accessible active sites, moderated local electronic structure, and strong synergistic effect, thereby enabling them to not only deliver an ultralow overpotential (244 mV @ 10 mA cm^-2) for oxygen evolution reaction (OER) but also high-performance overall water electrolysis by coupling with commercial Pt/C, with a potential of 1.52 V at 10 mA cm^-2. Moreover, experiments and characterizations also reveal that the remaining Zn²⁺ can facilitate OH^- adsorption and charge transfer, which also further improves the electrocatalytic OER performance. This work proposes a promising strategy for creating surface defects in heterostructured TMOs and provides insights to understand the defect- and interface-induced enhancement of OER electrocatalysis.

Engineering the electronic structure of Ni3FeS with polyaniline for enhanced electrocatalytic performance of overall water splitting

Developing highly efficient and stable electrocatalysts for oxygen evolution reaction is of significant importance for applications in energy conversion and storage. Modulation of electronic structure of catalysts is critical for improving the performance of the resulting electrodes. Here, we report a facile way to engineer the electronic structure of Ni₃FeS by coating a thin polyaniline (PANI) layer for improving electrocatalytic activity for overall water splitting. Experimental investigations unveil that the strong electronic interactions between the lone electron pairs of nitrogen in PANI and d orbitals of iron, nickel in Ni₃FeS result in an electron-rich structure of Ni and Fe, and consequently optimize the adsorption and desorption processes to promote the OER activity. Remarkably, the resulting PANI/Ni₃FeS electrode exhibited much enhanced OER performance with a low overpotential of 143 mV at a current density of 10 mA·cm^-2and good stability. Promisingly, coupled with the reported MoNi₄/MoO₂electrode, the two-electrode electrolyzer achieved a current density of 10 mA·cm^-2with a relatively low potential of 1.55 V, and can generate oxygen and hydrogen bubbles steadily driven by a commercial dry battery, endowed the composite electrocatalyst with high potential for practical applications.

Single atoms (Pt, Ir and Rh) anchored on activated NiCo LDH for alkaline hydrogen evolution reaction

Here, we report the synthesis of activated NiCo LDH to immobilize Pt, Ir and Rh single atoms for hydrogen evolution reaction. The Pt/A-NiCo LDH electrocatalyst exhibits the highest catalytic ability with a low overpotential of 16 mV to achieve a current density of 10 mA cm^-2 and a mass activity about 24.8-fold that of commercial Pt/C. The results suggest that the Pt single atom catalyst can not only accelerate the Volmer steps in alkaline media, but also optimize the hydrogen adsorption process, improving the HER catalytic activity.

Enhanced visible light photocatalytic hydrogen production over poly(dibenzothiophene-S,S-dioxide)-based heterostructures decorated by Earth-abundant layered double hydroxides

Layered double hydroxides (LDHs) have emerged as one of the promising catalyst substitutes to noble metals in photocatalytic water splitting due to their unique optoelectronic properties. Herein, a series of novel PSO@NiFeLDH composites have been designed and synthesized to investigate photocatalytic performance. Various physicochemical techniques characterized their structural, nanomorphological, and optical properties. These results demonstrated the existence of NiFeLDH particles on the surface of PSO and the strong interaction between NiFeLDH and PSO. The photocatalytic performance was much increased in the case of PSO@NiFeLDH as compared to that of Pt-modified PSO because of the synergistic effect between PSO and NiFeLDH. Remarkably, PSO@NiFeLDH-15 exhibits the highest photocatalytic activity with a rate of 52.8 mmol h^-1 g^-1 at an optimal content without a Pt cocatalyst under visible light irradiation.

Synthesis of NiSe2 /Fe3 O4 Nanotubes with Heteroepitaxy Configuration as a High-Efficient Oxygen Evolution Electrocatalyst

The rational design of high-efficient non-noble metal electrocatalysts for oxygen evolution reactions (OER) is of significance in electrochemical energy conversion. However, such low-cost but highly active electrocatalysts remain poorly developed because of the daunting synthetic challenge. Here, the synthesis of NiSe₂ /Fe₃ O₄ nanotubes via a facile self-templating strategy, which manifests unique tetragonal morphology, asymmetric hollow interior, and unusual but adaptable heteroepitaxy structure, is reported. Benefiting from sufficient active sites and their improved activity around the heterointerface, accompanied by the good conductivity, the NiSe₂ /Fe₃ O₄ nanotubes exhibit as a superior OER electrocatalyst, which affords the current density of 10 mA cm^-2 at a very small overpotential of 199 mV, high attainable current density beyond 200 mA cm^-2 , and mass activity of 984.5 A g^-1 , as well as excellent stability for 100 h in the alkaline media. This work provides a unique synthetic pathway to fabricate superior OER electrocatalysts by optimizing their composition and architecture.

Activated Ni-OH Bonds in a Catalyst Facilitates the Nucleophile Oxidation Reaction

The nucleophile oxidation reaction (NOR) is of enormous significance for organic electrosynthesis and coupling for hydrogen generation. However, the nonuniform NOR mechanism limits its development. For the NOR, involving electrocatalysis and organic chemistry, both the electrochemical step and non-electrochemical process should be taken into account. The NOR of nickel-based hydroxides includes the electrogenerated dehydrogenation of the Ni²⁺ -OH bond and a spontaneous non-electrochemical process; the former determines the electrochemical activity, and the nucleophile oxidation pathway depends on the latter. Herein, the space-confinement-induced synthesis of Ni₃ Fe layered double hydroxide intercalated with single-atom-layer Pt nanosheets (Ni₃ Fe LDH-Pt NS) is reported. The synergy of interlayer Pt nanosheets and multiple defects activates Ni-OH bonds, thus exhibiting an excellent NOR performance. The spontaneous non-electrochemical steps of the NOR are revealed, such as proton-coupled electron transfer (PCET; Ni³⁺ -O + X-H = Ni²⁺ -OH + X^• ), hydration, and rearrangement. Hence, the reaction pathway of the NOR is deciphered, which not only helps to perfect the NOR mechanism, but also provides inspiration for organic electrosynthesis.

Self-Supporting NiFe Layered Double Hydroxide “Nanoflower” Cluster Anode Electrode for an Efficient Alkaline Anion Exchange Membrane Water Electrolyzer

The development of an efficient and durable oxygen evolution reaction (OER) electrode is needed to solve the bottleneck in the application of an anion exchange membrane water electrolyzer (AEMWE). In this work, the self-supporting NiFe layered double hydroxides (NiFe LDHs) “nanoflower” cluster OER electrode directly grown on the surface of nickel fiber felt (Ni fiber) was synthesized by a one-step impregnation at ambient pressure and temperature. The self-supporting NiFe LDHs/Ni fiber electrode showed excellent activity and stability in a three-electrode system and as the anode of AEMWE. In a three-electrode system, the NiFe LDHs/Ni fiber electrode showed excellent OER performance with an overpotential of 208 mV at a current density of 10 mA cm−2 in 1 M KOH. The NiFe LDHs/Ni fiber electrode was used as the anode of the AEMWE, showing high cell performance with a current density of 0.5 A cm−2 at 1.68 V and a stability test for 200 h in 1 M KOH at 70 °C. The electrocatalytic performance of NiFe LDHs/Ni fiber electrode is due to the special morphological structure of “nanoflower” cluster petals stretching outward to produce the “tip effect,” which is beneficial for the exposure of active sites at the edge and mass transfer under high current density. The experimental results show that the NiFe LDHs/Ni fiber electrode synthesized by the one-step impregnation method has the advantages of good activity and low cost, and it is promising for industrial application.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

Tiny Ni Nanoparticles Embedded in Boron- and Nitrogen-Codoped Porous Carbon Nanowires for High-Efficiency Water Splitting

The integration of nickel (Ni) nanoparticle (NP)-embedded carbon layers (Ni@C) into the three-dimensional (3D) hierarchically porous carbon architectures, where ultrahigh boron (B) and nitrogen (N) doping is a potential methodology for boosting Ni catalysts' water splitting performances, was achieved. In this study, the novel 3D ultrafine Ni NP-embedded and B- and N-codoped hierarchically porous carbon nanowires (denoted as Ni@BNPCFs) were successfully synthesized via pyrolysis of the corresponding 3D nickel acetate [Ni(AC)₂·4H₂O]-hydroxybenzeneboronic acid-polyvinylpyrrolidone precursor networks woven by electrospinning. After optimizing the pyrolysis temperatures, various structural and morphological characterization analyses indicate that the optimal Ni@BNPCFs-900 networks own a large surface area, abundant micro/mesopores, and vast carbon edges/defects, which boost doping a large amount of B (5.81 atom %) and N (5.84 atom %) dopants into carbon frameworks with 6.36 atom % of BC₃, pyridinic-N (pyridinic-N-Ni), and graphitic-N active sites. Electrochemical measurements demonstrate that Ni@BNPCFs-900 reveals the best hydrogen evolution reaction (HER) and oxygen reduction reaction catalytic activities in an alkaline solution. The HER potential at 10 mA cm^-2 [E₁₀ = -164.2 mV vs reversible hydrogen electrode (RHE)] of the optimal Ni@BNPCFs-900 is just 96.2 mV more negative than that of the state-of-the-art 20 wt % Pt/C (E₁₀ = -68 mV vs RHE). In particular, the OER E₁₀ and Tafel slope of the optimal Ni@BNPCFs-900 (1.517 V vs RHE and 19.31 mV dec^-1) are much smaller than those of RuO₂ (1.557 V vs RHE and 64.03 mV dec^-1). For full water splitting, the catalytic current density achieves 10 mA cm^-2 at a low cell voltage of 1.584 V for the (-) Ni@BNPCFs-900||Ni@BNPCFs-900 (+) electrolysis cell, which is 10 mV smaller than that of the (-) 20 wt % Pt/C||RuO₂ (+) benchmark (1.594 V) under the same conditions. The synergistic effects of 3D hierarchically porous structures, advanced charge transport ability, and abundant active centers [such as Ni@BNC, BC₃, pyridinic-N (pyridinic-N-Ni), and graphitic-N] are responsible for the excellent water-splitting catalytic activity of the Ni@BNPCFs-900 networks. Especially, because of the remarkable structural and chemical stabilities of 3D hierarchically porous Ni@BNPCFs-900 networks, the (-) Ni@BNPCFs-900||Ni@BNPCFs-900 (+) water electrolysis cell displays an excellent stability.

Atomistic Understanding of Two-dimensional Electrocatalysts from First Principles

Two-dimensional electrocatalysts have attracted great interest in recent years for renewable energy applications. However, the atomistic mechanisms are still under debate. Here we review the first-principles studies of the atomistic mechanisms of common 2D electrocatalysts. We first introduce the first-principles models for studying heterogeneous electrocatalysis then discuss the common 2D electrocatalysts with a focus on N doped graphene, single metal atoms in graphene, and transition metal dichalcogenides. The reactions include hydrogen evolution, oxygen evolution, oxygen reduction, and carbon dioxide reduction. Finally, we discuss the challenges and the future directions to improve the fundamental understanding of the 2D electrocatalyst at atomic level.

Carbon-Based Material-Supported Single-Atom Catalysts for Energy Conversion

In recent years, single-atom catalysts (SACs) with unique electronic structure and coordination environment have attracted much attention due to its maximum atomic efficiency in the catalysis fields. However, it is still a great challenge to rationally regulate the coordination environments of SACs and improve the loading of metal atoms for SACs during catalysis progress. Generally, carbon-based materials with excellent electrical conductivity and large specific surface area are widely used as catalyst supports to stabilize metal atoms. Meanwhile, carbon-based material-supported SACs have also been extensively studied and applied in various energy conversion reactions, such as hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO₂RR), and nitrogen reduction reaction (NRR). Herein, rational synthesis methods and advanced characterization techniques were introduced and summarized in this review. Then, the theoretical design strategies and construction methods for carbon-based material-supported SACs in electrocatalysis applications were fully discussed, which are of great significance for guiding the coordination regulation and improving the loading of SACs. In the end, the challenges and future perspectives of SACs were proposed, which could largely contribute to the development of single atom catalysts at the turning point.

Regulating the Spin State of FeIII Enhances the Magnetic Effect of the Molecular Catalysis Mechanism

Aqueous-phase oxygen evolution reaction (OER) is the bottleneck of water splitting. The formation of the O-O bond involves the generation of paramagnetic oxygen molecules from the diamagnetic hydroxides. The spin configurations might play an important role in aqueous-phase molecular electrocatalysis. However, spintronic electrocatalysis is almost an uncultivated land for the exploration of the oxygen molecular catalysis process. Herein, we present a novel magnetic Fe^III site spin-splitting strategy, wherein the electronic structure and spin states of the Fe^III sites are effectively induced and optimized by the Jahn-Teller effect of Cu²⁺. The theoretical calculations and operando attenuated total reflectance-infrared Fourier transform infrared (ATR FT-IR) reveal the facilitation for the O-O bond formation, which accelerates the production of O₂ from OH^- and improves the OER activity. The Cu₁-Ni₆Fe₂-LDH catalyst exhibits a low overpotential of 210 mV at 10 mA cm^-2 and a low Tafel slope (33.7 mV dec^-1), better than those of the initial Cu₀-Ni₆Fe₂-LDHs (278 mV, 101.6 mV dec^-1). With the Cu²⁺ regulation, we have realized the transformation of NiFe-LDHs from ferrimagnets to ferromagnets and showcase that the OER performance of Cu-NiFe-LDHs significantly increases compared with that of NiFe-LDHs under the effect of a magnetic field for the first time. The magnetic-field-assisted Cu₁-Ni₆Fe₂-LDHs provide an ultralow overpotential of 180 mV at 10 mA cm^-2, which is currently one of the best OER performances. The combination of the magnetic field and spin configuration provides new principles for the development of high-performance catalysts and understandings of the catalytic mechanism from the spintronic level.

Controlled synthesis of trimetallic nitrogen-incorporated CoNiFe layered double hydroxide electrocatalysts for boosting the oxygen evolution reaction

The development of non-precious trimetallic electrocatalysts exhibiting high activity and stability is a promising strategy for fabricating efficient electrocatalysts for the oxygen evolution reaction (OER). In this study, trimetallic nitrogen-incorporated CoNiFe (N–CoNiFe) was produced to solve the low OER efficiency using a facile co-precipitation method in the presence of ethanolamine (EA) ligands. A series of CoNiFe catalysts at different EA concentrations were also investigated to determine the effects of the ligand in the co-precipitation of a trimetallic system. The introduction of an optimized EA concentration (20 mM) improved the electrocatalytic performance of N–CoNiFe dramatically, with an overpotential of 318 mV at 10 mA cm⁻² in 1.0 M KOH and a Tafel slope of 72.2 mV dec⁻¹. In addition, N–CoNiFe shows high durability in the OER process with little change in the overpotential (ca. 16.0 mV) at 10 mA cm⁻² after 2000 cycles, which was smaller than that for commercial Ir/C (38.0 mV).

A trimetallic nitrogen-incorporated CoNiFe exhibited good catalytic properties toward the oxygen evolution reaction, e.g., high stability and low overpotential (318 mV at 10 mA cm⁻²).

Activating lattice oxygen in NiFe-based (oxy)hydroxide for water electrolysis

Transition metal oxides or (oxy)hydroxides have been intensively investigated as promising electrocatalysts for energy and environmental applications. Oxygen in the lattice was reported recently to actively participate in surface reactions. Herein, we report a sacrificial template-directed approach to synthesize Mo-doped NiFe (oxy)hydroxide with modulated oxygen activity as an enhanced electrocatalyst towards oxygen evolution reaction (OER). The obtained MoNiFe (oxy)hydroxide displays a high mass activity of 1910 A/g_metal at the overpotential of 300 mV. The combination of density functional theory calculations and advanced spectroscopy techniques suggests that the Mo dopant upshifts the O 2p band and weakens the metal-oxygen bond of NiFe (oxy)hydroxide, facilitating oxygen vacancy formation and shifting the reaction pathway for OER. Our results provide critical insights into the role of lattice oxygen in determining the activity of (oxy)hydroxides and demonstrate tuning oxygen activity as a promising approach for constructing highly active electrocatalysts.

Interfacial Fe-O-Ni-O-Fe Bonding Regulates the Active Ni Sites of Ni-MOFs via Iron Doping and Decorating with FeOOH for Super-Efficient Oxygen Evolution

The integration of Fe dopant and interfacial FeOOH into Ni-MOFs [Fe-doped-(Ni-MOFs)/FeOOH] to construct Fe-O-Ni-O-Fe bonding is demonstrated and the origin of remarkable electrocatalytic performance of Ni-MOFs is elucidated. X-ray absorption/photoelectron spectroscopy and theoretical calculation results indicate that Fe-O-Ni-O-Fe bonding can facilitate the distorted coordinated structure of the Ni site with a short nickel-oxygen bond and low coordination number, and can promote the redistribution of Ni/Fe charge density to efficiently regulate the adsorption behavior of key intermediates with a near-optimal d-band center. Here the Fe-doped-(Ni-MOFs)/FeOOH with interfacial Fe-O-Ni-O-Fe bonding shows superior catalytic performance for OER with a low overpotential of 210 mV at 15 mA cm^-2 and excellent stability with ≈3 % attenuation after a 120 h cycle test. This study provides a novel strategy to design high-performance Ni/Fe-based electrocatalysts for OER in alkaline media.

In Situ Carbon Corrosion and Cu Leaching as a Strategy for Boosting Oxygen Evolution Reaction in Multimetal Electrocatalysts

The number of active sites and their intrinsic activity are key factors in designing high-performance catalysts for the oxygen evolution reaction (OER). The synthesis, properties, and in-depth characterization of a homogeneous CoNiFeCu catalyst are reported, demonstrating that multimetal synergistic effects improve the OER kinetics and the intrinsic activity. In situ carbon corrosion and Cu leaching during the OER lead to an enhanced electrochemically active surface area, providing favorable conditions for improved electronic interaction between the constituent metals. After activation, the catalyst exhibits excellent activity with a low overpotential of 291.5 ± 0.5 mV at 10 mA cm^-2 and a Tafel slope of 43.9 mV dec^-1 . It shows superior stability compared to RuO₂ in 1 m KOH, which is even preserved for 120 h at 500 mA cm^-2 in 7 m KOH at 50 °C. Single particles of this CoNiFeCu after their placement on nanoelectrodes combined with identical location transmission electron microscopy before and after applying cyclic voltammetry are investigated. The improved catalytic performance is due to surface carbon corrosion and Cu leaching. The proposed catalyst design strategy combined with the unique single-nanoparticle technique contributes to the development and characterization of high-performance catalysts for electrochemical energy conversion.

Towards the Rational Design of Stable Electrocatalysts for Green Hydrogen Production

Now, it is time to set up reliable water electrolysis stacks with active and robust electrocatalysts to produce green hydrogen. Compared with catalytic kinetics, much less attention has been paid to catalyst stability, and the weak understanding of the catalyst deactivation mechanism restricts the design of robust electrocatalysts. Herein, we discuss the issues of catalysts’ stability evaluation and characterization, and the degradation mechanism. The systematic understanding of the degradation mechanism would help us to formulate principles for the design of stable catalysts. Particularly, we found that the dissolution rate for different 3d transition metals differed greatly: Fe dissolves 114 and 84 times faster than Co and Ni. Based on this trend, we designed Fe@Ni and FeNi@Ni core-shell structures to achieve excellent stability in a 1 A cm−2 current density, as well as good catalytic activity at the same time.

In Situ/Operando Insights into the Stability and Degradation Mechanisms of Heterogeneous Electrocatalysts

The further commercialization of renewable energy conversion and storage technologies requires heterogeneous electrocatalysts that meet the exacting durability target. Studies of the stability and degradation mechanisms of electrocatalysts are expected to provide important breakthroughs in stability issues. Accessible in situ/operando techniques performed under realistic reaction conditions are therefore urgently needed to reveal the nature of active center structures and establish links between the structural motifs in a catalyst and its stability properties. This review highlights recent research advances regarding in situ/operando techniques and improves the understanding of the stabilities of advanced heterogeneous electrocatalysts used in a diverse range of electrochemical reactions; it also proposes some degradation mechanisms. The review concludes by offering suggestions for future research.