Organic Semiconductors for Solution-Processable Field-Effect Transistors (OFETs)

Recent progress for silver nanowires conducting film for flexible electronics

Silver nanowires (AgNWs), as one-dimensional nanometallic materials, have attracted wide attention due to the excellent electrical conductivity, transparency and flexibility, especially in flexible and stretchable electronics. However, the microscopic discontinuities require AgNWs be attached to some carrier for practical applications. Relative to the preparation method, how to integrate AgNWs into the flexible matrix is particularly important. In recent years, plenty of papers have been published on the preparation of conductors based on AgNWs, including printing techniques, coating techniques, vacuum filtration techniques, template-assisted assembly techniques, electrospinning techniques and gelating techniques. The aim of this review is to discuss different assembly method of AgNW-based conducting film and their advantages.

GRAPHIC ABSTRACT

Conducting films based on silver nanowires (AgNWs) have been reviewed with a focus on their assembly and their advantages.

Leveraging Fleeting Strained Intermediates to Access Complex Scaffolds

Arynes, strained cyclic alkynes, and strained cyclic allenes were validated as plausible intermediates in the 1950s and 1960s. Despite initially being considered mere scientific curiosities, these transient and highly reactive species have now become valuable synthetic building blocks. This Perspective highlights recent advances in the field that have allowed access to structural and stereochemical complexity, including recent breakthroughs in asymmetric catalysis.

Mechanoelectric Response of Single-Crystal Rubrene from Ab Initio Molecular Dynamics

A robust understanding of the mechanoelectric response of organic semiconductors is crucial for the development of materials for flexible electronics. In particular, the prospect of using external mechanical strain to induce a controlled modulation in the charge mobility of the material is appealing. Here we develop an accurate computational protocol for the prediction of the mechanical strain dependence of charge mobility. Ab initio molecular dynamics simulations with a van der Waals density functional are carried out to quantify the off-diagonal electronic disorder in the system as a function of strain by the explicit calculation of the thermal distributions of electronic coupling matrix elements. The approach is applied to a representative molecular organic semiconductor, single-crystal rubrene. We find that charge mobility along the high-mobility direction a⃗ increases with compressive strain, as one might expect. However, the increase is larger when compressive strain is applied in the perpendicular direction than in the parallel direction with respect to a⃗, in agreement with experimental reports. We show that this seemingly counterintuitive result is a consequence of a significantly greater suppression of electronic coupling fluctuations in the range of 50-150 cm^-1, when strain is applied in the perpendicular direction. Thus our study highlights the importance of considering off-diagonal electron-phonon coupling in understanding the mechanoelectric response of organic semiconducting crystals. The computational approach developed here is well suited for the accurate prediction of strain-charge mobility relations and should provide a useful tool for the emerging field of molecular strain engineering.

Energy-Level Manipulation in Novel Indacenodithiophene-Based Donor-Acceptor Polymers for Near-Infrared Organic Photodetectors

Organic photodetectors (OPDs) are promising candidates for next-generation digital imaging and wearable sensors due to their low cost, tuneable optoelectrical properties combined with high-level performance, and solution-processed fabrication techniques. However, OPD detection is often limited to shorter wavelengths, whereas photodetection in the near-infrared (NIR) region is increasingly being required for wearable electronics and medical device applications. NIR sensing suffers from low responsivity and high dark currents. A common approach to enhance NIR photon detection is lowering the optical band gap via donor-acceptor (D-A) molecular engineering. Herein, we present the synthesis of two novel indacenodithiophene (IDT)-based D-A conjugated polymers, namely, PDPPy-IT and PSNT-IT via palladium-catalyzed Stille coupling reactions. These novel polymers exhibit optical band gaps of 1.81 and 1.27 eV for PDPPy-IT and PSNT-IT, respectively, with highly desirable visible and NIR light detection through energy-level manipulation. Moreover, excellent materials' solubility and thin-film processability allow easy incorporation of these polymers as an active layer into OPDs for light detection. In the case of PSNT-IT devices, a photodetection up to 1000 nm is demonstrated with a peak sensitivity centered at 875 nm, whereas PDPPy-IT devices are efficient in detecting the visible spectrum with the highest sensitivity at 660 nm. Overall, both OPDs exhibit spectral responsivities up to 0.11 A W^-1 and dark currents in the nA cm^-2 range. With linear dynamic ranges exceeding 140 dB and fast response times recorded below 100 μs, the use of novel IDT-based polymers in OPDs shows great potential for wearable optoelectronics.

Diversity-oriented synthesis of nanographenes enabled by dearomative annulative π-extension

Nanographenes and polycyclic aromatic hydrocarbons (PAHs) are among the most important classes of compounds, with potential applications in nearly all areas of science and technology. While the theoretically possible number of nanographene structures is extraordinary, most of these molecules remain synthetically out of reach due to a lack of programmable and diversity-oriented synthetic methods, and their potentially huge structure-property diversity has not been fully exploited. Herein we report a diversity-oriented, growth-from-template synthesis of nanographenes enabled by iterative annulative π-extension (APEX) reactions from small PAH starting materials. The developed dearomative annulative π-extension (DAPEX) reaction enables π-elongation at the less-reactive M-regions of PAHs, and is successfully combined with complementary APEX reactions that occur at K- and bay-regions to access a variety of previously untapped nanographenes.

Nanographenes and polycyclic aromatic hydrocarbons (PAHs) are important classes of compounds with numerous applications, but challenging to access due to a lack of programmable and diversity-oriented methods. Here, the authors report a diversity-oriented, growth-from-template synthesis of nanographenes enabled by iterative annulative π-extension reactions from small PAH starting materials.

Free Charge Carriers in Homo-Sorted π-Stacks of Donor-Acceptor Conjugates

Inspired by the high photoconversion efficiency observed in natural light-harvesting systems, the hierarchical organization of molecular building blocks has gained impetus in the past few decades. Particularly, the molecular arrangement and packing in the active layer of organic solar cells (OSCs) have garnered significant attention due to the decisive role of the nature of donor/acceptor (D/A) heterojunctions in charge carrier generation and ultimately the power conversion efficiency. This review focuses on the recent developments in emergent optoelectronic properties exhibited by self-sorted donor-on-donor/acceptor-on-acceptor arrangement of covalently linked D-A systems, highlighting the ultrafast excited state dynamics of charge transfer and transport. Segregated organization of donors and acceptors promotes the delocalization of photoinduced charges among the stacks, engendering an enhanced charge separation lifetime and percolation pathways with ambipolar conductivity and charge carrier yield. Covalently linking donors and acceptors ensure a sufficient D-A interface and interchromophoric electronic coupling as required for faster charge separation while providing better control over their supramolecular assemblies. The design strategies to attain D-A conjugate assemblies with optimal charge carrier generation efficiency, the scope of their application compared to state-of-the-art OSCs, current challenges, and future opportunities are discussed in the review. An integrated overview of rational design approaches derived from the comprehension of underlying photoinduced processes can pave the way toward superior optoelectronic devices and bring in new possibilities to the avenue of functional supramolecular architectures.

Multi-level aggregation of conjugated small molecules and polymers: from morphology control to physical insights

Aggregation of molecules is a multi-molecular phenomenon occurring when two or more molecules behave differently from discrete molecules due to their intermolecular interactions. Moving beyond single molecules, aggregation usually demonstrates evolutive or wholly emerging new functionalities relative to the molecular components. Conjugated small molecules and polymers interact with each other, resulting in complex solution-state aggregates and solid-state microstructures. Optoelectronic properties of conjugated small molecules and polymers are sensitively determined by their aggregation states across a broad range of spatial scales. This review focused on the aggregation ranging from molecular structure, intermolecular interactions, solution-state assemblies, and solid-state microstructures of conjugated small molecules and polymers. We addressed the importance of such aggregation in filling the gaps from the molecular level to device functions and highlighted the multi-scale structures and properties at different scales. From the view of multi-level aggregation behaviors, we divided the whole process from the molecule to devices into several parts: molecular design, solvation, solution-state aggregation, crystal engineering, and solid-state microstructures. We summarized the progress and challenges of relationships between optoelectronic properties and multi-level aggregation. We believe aggregation science will become an interdisciplinary research field and serves as a general platform to develop future materials with the desired functions.

Rh(iii)-Catalysed synthesis of cinnolinium and fluoranthenium salts using C-H activation/annulation reactions: organelle specific mitochondrial staining applications

The construction of a novel class of indazolo[2,1-a]cinnolin-7-ium and diazabenzofluoranthenium salts was developed by using Rh(iii)-catalyzed C-H activation/annulation reactions with 2-phenyl-2H-indazole, and internal alkynes, which resulted in structurally important polycyclic heteroaromatic compounds (PHAs). This reaction uses mild reaction conditions and has a high efficiency, low catalyst loading, and wide substrate scope. The overall catalytic process involves C-H activation followed by C-C/C-N bond formation. Furthermore, the synthesised cinnolinium/fluoranthenium salts exhibit potential fluorescence properties and 5i was targeted in particular for specific mitochondrial staining in order to investigate cancer cell lines.

Towards peptide-based tunable multistate memristive materials

Development of new memristive hardware is a technological requirement towards widespread neuromorphic computing. Molecular spintronics seems to be a fertile field for the design and preparation of this hardware. Within molecular spintronics, recent results on metallopeptides demonstrating the interaction between paramagnetic ions and the chirality induced spin selectivity effect hold particular promise for developing fast (ns-μs) operation times. [R. Torres-Cavanillas et al., J. Am. Chem. Soc., 2020, DOI: 10.1021/jacs.0c07531]. Among the challenges in the field, a major highlight is the difficulty in modelling the spin dynamics in these complex systems, but at the same time the use of inexpensive methods has already allowed progress in that direction. Finally, we discuss the unique potential of biomolecules for the design of multistate memristors with a controlled- and indeed, programmable-nanostructure, allowing going beyond anything that is conceivable by employing conventional coordination chemistry.

Synthesis and Photophysical Properties of Soluble N-Doped Rubicenes via Ruthenium-Catalyzed Transfer Hydrogenative Benzannulation

Ruthenium-catalyzed butadiene-mediated benzannulation enabled the first synthesis of 3,10-(di-tert-butyl)rubicene and its N-doped derivatives as well as preliminary studies on their photophysical properties. Unlike the parent rubicene and 3,10-(di-tert-butyl)rubicene, which adopt classical herringbone-type packing motifs in the solid state, the N-doped congener 7 b displayed columnar packing with an alternating co-facial arrangement of aromatic and heteroaromatic substructures.

All-in-one: a new approach toward robust and solution-processable copper halide hybrid semiconductors by integrating covalent, coordinate and ionic bonds in their structures

Conventional inorganic semiconductors are best known for their superior physical properties and chemical robustness, and their widespread use in optoelectronic devices. However, implementation of these materials in many other applications has been hindered by their poor solubility and/or solution-processability, a longstanding drawback that is largely responsible for issues such as high cost. While recent progress on hybrid perovskites, an important class of inorganic-organic hybrid materials, has shed light on the development of high-performance solution processable semiconductors, they rely heavily on toxic metals and generally suffer from framework instability. To address these issues, a new group of hybrid semiconductors based on anionic copper(i) halide and cationic organic ligands has been developed. These compounds are noted as All-In-One (AIO) structures as they consist of covalently bonded anionic CuX inorganic modules that form both coordinate and ionic bonds with cationic organic ligands. Studies demonstrate that framework stability and solution processibility of these materials are greatly enhanced as a result of such bonds. In the perspective, we highlight the development of this newly emerged type of materials including their crystal structures, chemical and physical properties and possible applications. The untapped potential that the AIO approach can offer for other hybrid families is also discussed.

Solution-processed electronics for artificial synapses

Artificial synaptic devices and systems have become hot topics due to parallel computing, high plasticity, integration of storage, and processing to meet the challenges of the traditional Von Neumann computers. Currently, two-terminal memristors and three-terminal transistors have been mainly developed for high-density storage with high switching speed and high reliability because of the adjustable resistivity, controllable ion migration, and abundant choices of functional materials and fabrication processes. To achieve the low-cost, large-scale, and easy-process fabrication, solution-processed techniques have been extensively employed to develop synaptic electronics towards flexible and highly integrated three-dimensional (3D) neural networks. Herein, we have summarized and discussed solution-processed techniques in the fabrication of two-terminal memristors and three-terminal transistors for the application of artificial synaptic electronics mainly reported in the recent five years from the view of fabrication processes, functional materials, electronic operating mechanisms, and system applications. Furthermore, the challenges and prospects were discussed in depth to promote solution-processed techniques in the future development of artificial synapse with high performance and high integration.

Control of Molecular Orientation in Organic Semiconductors Using Weak Iodine-Iodine Interactions

Controlling the molecular orientation of materials is a key issue for improving the performance of organic semiconductor devices. Herein, we demonstrate the structure-property relationships of iodinated and noniodinated molecules based on an asymmetric thienoacene framework. The noniodinated molecule formed an antiparallel slip-stack structure with small orbital overlap between molecules. In contrast, the iodinated molecule formed a head-to-head layered-herringbone structure, and as a result, the transfer integrals became larger and the hole mobility increased significantly compared with the noniodinated material. The iodinated molecule was made into a stable and solution-processable p-type organic semiconductor with a mobility of 2.2 cm² V^-1 s^-1, which was 2 orders of magnitude higher than that of the noniodinated molecule. This study reveals that controlling molecular orientations using iodine-iodine interactions is a promising strategy for accelerating the development of organic semiconductor materials.

Exploration of Kobayashi's aryne precursor: a potent reactive platform for the synthesis of polycyclic aromatic hydrocarbons

Arynes due to their transient nature leads to remarkable and versatile applications in the synthetic world. Apparently, researchers have focused on the construction of simple to complex π-conjugated systems using arynes as the reactive platform. In this regard, Kobayashi's aryne precursor has shown a great extent of reactivity and afforded significant advancement in the synthesis of polycyclic aromatic systems with wide practical utility. This review emphasizes the extensive utilization of Kobayashi's aryne intermediates and their derivatives for the synthesis of different classes of polycyclic aromatic hydrocarbons (PAHs).

Elemental-Sulfur-Enabled Divergent Synthesis of Disulfides, Diselenides, and Polythiophenes from β-CF3 -1,3-Enynes

Divergent synthesis for precise constructions of cyclic unsymmetrical diaryl disulfides or diselenides and polythiophenes from CF₃ -containing 1,3-enynes and S₈ was developed when the ortho group is F, Cl, Br, and NO₂ on aromatic rings. Meanwhile, disulfides (diselenides) were also quickly constructed when the ortho group is H. These transformations undergo cascade thiophene construction/selective C3-position thiolation process, featuring simple operations, divergent synthesis, broad substrate scope, readily available starting materials, and valuable products. A novel plausible radical annulation process was proposed and validated by DFT calculations for the first time. A series of derivatizations about the thiophene (TBT) and disulfides were also well-represented.

Enhancement of air-stability, π-stacking ability, and charge transport properties of fluoroalkyl side chain engineered n-type naphthalene tetracarboxylic diimide compounds

In this study, the impact of fluoroalkyl side chain substitution on the air-stability, π-stacking ability, and charge transport properties of the versatile acceptor moiety naphthalene tetracarboxylic diimide (NDI) has been explored. A density functional theory (DFT) study has been carried out for a series of 24 compounds having different side chains (alkyl, fluoroalkyl) through the imide nitrogen position of NDI moiety. The fluoroalkyl side chain engineered NDI compounds have much deeper highest occupied molecular orbitals (HOMO) and lowest unoccupied molecular orbitals (LUMO) than those of their alkyl substituted compounds due to the electron withdrawing nature of fluoroalkyl groups. The higher electron affinity (EA > 2.8 eV) and low-lying LUMO levels (<−4.00 eV) for fluoroalkyl substituted NDIs reveal that they may exhibit better air-stability with superior n-type character. The computed optical absorption spectra (∼386 nm) for all the investigated NDIs using time-dependent DFT (TD-DFT) lie in the ultra-violet (UV) region of the solar spectrum. In addition, the low value of the LOLIPOP (Localized Orbital Locator Integrated Pi Over Plane) index for fluoroalkyl side chain comprising NDI compounds indicates better π–π stacking ability. This is also in good agreement for the predicted π–π stacking interaction obtained from a molecular electrostatic potential energy surface (ESP) study. The π–π stacking is thought to be of cofacial interaction for the fluoroalkyl substituted compounds and herringbone interaction for the alkyl substituted compounds. The calculated results shed light on why side chain engineering with fluoroalkyl groups can effectively lead to better air-stability, π-stacking ability and improved charge transport properties.

In this study, the impact of fluoroalkyl side chain substitution on the air-stability, π-stacking ability, and charge transport properties of the versatile acceptor moiety naphthalene tetracarboxylic diimide (NDI) has been explored.

Synthesis, structure and properties of semi-internally BN-substituted annulated thiophenes

A series of semi-internally BN-substituted annulated thiophenes were synthesized from easily accessible 2,1-borazaronaphthalenes.

D–A dyads and A–D–A triads based on ferrocene: push–pull dyes with unusual behaviours in solution

Ferrocene has been extensively used for the design of chromophores with reversible electrochemical properties.

Characteristics of Low Band Gap Copolymers Containing Anthracene-Benzothiadiazole Dicarboxylic Imide: Synthesis, Optical, Electrochemical, Thermal and Structural Studies

Two novel low band gap donor-acceptor (D-A) copolymers, poly[9,10-bis(4-(dodecyloxy)phenyl)-2,6-anthracene-alt-5,5-(4',7'-bis(2-thienyl)-2',1',3'-benzothiadiazole-N-5,6-(3,7-dimethyloctyl)dicarboxylic imide)] (PPADTBTDI-DMO) and poly[9,10-bis(4-(dodecyloxy)phenyl)-2,6-anthracene-alt-5,5-(4',7'-bis(2-thienyl)-2',1',3'-benzothiadiazole-5,6-N-octyl-dicarboxylic imide)] (PPADTBTDI-8) were synthesized in the present work by copolymerising the bis-boronate ester of 9,10-phenylsubstituted anthracene flanked by thienyl groups as electron-donor units with benzothiadiazole dicarboxylic imide (BTDI) as electron-acceptor units. Both polymers were synthesized in good yields via Suzuki polymerisation. Two different solubilizing alkyl chains were anchored to the BTDI units in order to investigate the impact upon their solubilities, molecular weights, optical and electrochemical properties, structural properties and thermal stability of the resulting polymers. Both polymers have comparable molecular weights and have a low optical band gap (Eg) of 1.66 eV. The polymers have low-lying highest occupied molecular orbital (HOMO) levels of about -5.5 eV as well as the similar lowest unoccupied molecular orbital (LUMO) energy levels of -3.56 eV. Thermogravimetric analyses (TGA) of PPADTBTDI-DMO and PPADTBTDI-8 did not prove instability with decomposition temperatures at 354 and 313 °C, respectively. Powder X-ray diffraction (XRD) studies have shown that both polymers have an amorphous nature in the solid state, which could be used as electrolytes in optoelectronic devices.

Analysis of Solid-State Luminescence Emission Amplification at Substituted Anthracenes by Host-Guest Complex Formation

Small robust organic molecules showing solid-state luminescence are promising candidates for optoelectronic materials. Herein, we investigate a series of diphenylphosphanyl anthracenes [9-PPh2 -10-R-(C14 H8 )] and their sulfur oxidised analogues. The oxidation causes drastic changes in the molecular structure as the new orientation of the bulky (S)PPh2 substituent induces a strong butterfly bent structure of the anthracene core, which triggers a strong bathochromic shift resulting in a green solid-state fluorescence. As the emission properties change only slightly upon aggregation the origin of the emission is attributed to a typical monomer fluorescence. The host-guest complexes of [9-(S)PPh2 -10-Ethyl-(C14 H8 )] with four basic arenes reveal an emission enhancement up to five-times higher quantum yields compared to the pure host. Less interchromophoric interactions and a restriction of intramolecular motion within the host molecules due to fixation by weak C-H⋅⋅⋅π interactions with the co-crystallised arene are responsible for that emission enhancement.

Electrode and dielectric layer interface device engineering study using furan flanked diketopyrrolopyrrole-dithienothiophene polymer based organic transistors

We successfully demonstrated a detailed and systematic enhancement of organic field effect transistors (OFETs) performance using dithienothiophene (DTT) and furan-flanked diketopyrrolopyrrole based donor-acceptor conjugated polymer semiconductor namely PDPPF-DTT as an active semiconductor. The self-assembled monolayers (SAMs) treatments at interface junctions of the semiconductor-dielectric and at the semiconductor-metal electrodes has been implemented using bottom gate bottom contact device geometry. Due to SAM treatment at the interface using tailored approach, the significant reduction of threshold voltage (Vth) from - 15.42 to + 5.74 V has been observed. In addition to tuning effect of Vth, simultaneously charge carrier mobility (µFET) has been also enhanced the from 9.94 × 10-4 cm2/Vs to 0.18 cm2/Vs. In order to calculate the trap density in each OFET device, the hysteresis in transfer characteristics has been studied in detail for bare and SAM treated devices. Higher trap density in Penta-fluoro-benzene-thiol (PFBT) treated OFET devices enhances the gate field, which in turn controls the charge carrier density in the channel, and hence gives lower Vth = + 5.74 V. Also, PFBT treatment enhances the trapped interface electrons, which helps to enhance the mobility in this OFET architecture. The overall effect has led to possibility of reduction in the Vth with simultaneous enhancements of µFET in OFETs, following systematic device engineering methodology.

Abdullah S, Brza MA. Conducting Polymers for Optoelectronic Devices and Organic Solar Cells: A Review

In this review paper, we present a comprehensive summary of the different organic solar cell (OSC) families. Pure and doped conjugated polymers are described. The band structure, electronic properties, and charge separation process in conjugated polymers are briefly described. Various techniques for the preparation of conjugated polymers are presented in detail. The applications of conductive polymers for organic light emitting diodes (OLEDs), organic field effect transistors (OFETs), and organic photovoltaics (OPVs) are explained thoroughly. The architecture of organic polymer solar cells including single layer, bilayer planar heterojunction, and bulk heterojunction (BHJ) are described. Moreover, designing conjugated polymers for photovoltaic applications and optimizations of highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) energy levels are discussed. Principles of bulk heterojunction polymer solar cells are addressed. Finally, strategies for band gap tuning and characteristics of solar cell are presented. In this article, several processing parameters such as the choice of solvent(s) for spin casting film, thermal and solvent annealing, solvent additive, and blend composition that affect the nano-morphology of the photoactive layer are reviewed.

Electrochemical Properties and Excited-State Dynamics of Azaperylene Derivatives

A series of azaperylene derivatives such as monoazaperylene (MAPery), 1,6-diazaperylene (1,6-DiAPery), 1,7-diazaperylene (1,7-DiAPery), 1,12-diazaperylene (1,12-DiAPery), triazaperylene (TriAPery), and tetraazaperylene (TetAPery) was synthesized by changing the position and number of nitrogen atoms at the bay region of a perylene skeleton in 1, 6, 7, and 12 positions. The density functional theory (DFT) calculations and electrochemical measurements suggested that the energies of the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) states significantly become stabilized with increasing the number of nitrogen atoms, whereas the estimated HOMO-LUMO gaps approximately remain constant. This result is in good agreement with the absorption and fluorescence spectral measurements. Additionally, these steady-state spectroscopic measurements demonstrate the broadened spectra as compared to pristine perylene (Pery). In photophysical measurements, the fluorescence quantum yields (Φ_FL) significantly decreased as the number of nitrogen atoms increased, whereas much enhanced quantum yields and rate constants of internal conversion (Φ_IC and k_IC) were observed. Especially, the increased k_IC values of TriAPery (k_IC: ∼10⁸ s^-1) and TetAPery (k_IC: ∼10⁹ s^-1) are much larger than those of diazaperylene and monoazaperylene derivatives (k_IC: ∼10⁷ s^-1). These photophysical trends were successfully explained by time-dependent DFT (TD-DFT) calculations. Finally, the characteristic protonated and deprotonated processes of nitrogen atoms in azaperylenes under acidic conditions were monitored utilizing absorption and fluorescence measurements. The binding constants demonstrate that the nitrogen atoms at 1 and 12 positions of a perylene skeleton are essential for the increased values.

A-D-A Type Semiconducting Small Molecules with Bis(alkylsulfanyl)methylene Substituents and Control of Charge Polarity for Organic Field-Effect Transistors

In this study, we synthesize four different kinds of bis(alkylsulfanyl)methylene-substituted 4,9-dihydro-s-indaceno[1,2-b:5,6-b']dithiophene (IDT)-based acceptor-donor-acceptor (A-D-A) type small molecules (IDSIC, IDSIC-4F, IDSIC-4Cl, and IDSTIC) by incorporating electron-withdrawing halogen atoms or electron-releasing thiophene spacers. Herein, enhanced structural planarity and crystalline intermolecular packing are induced by the sp²-hybridized C═C double bond side chains and sulfur-sulfur chalcogen interactions. The fine control of intramolecular charge transfer modulates the electrochemical characteristics and the resulting carrier polarity in organic field-effect transistors (OFETs). Well-balanced ambipolar, n-dominant, and p-dominant charge transport properties are successfully demonstrated in OFETs by modulating the electron-donating or withdrawing strength based on the A-D-A structural motif, resulting in hole/electron mobilities of 0.599/0.553, 0.003/0.019, 0.092/0.897, and 0.683/0.103 cm²/V·s for IDSIC, IDSIC-4F, IDSIC-4Cl, and IDSTIC respectively, after thermal annealing at 200 °C. Thermal annealing of the as-cast films improves the intermolecular packing in an edge-on fashion, which is investigated in detail by grazing incidence X-ray scattering. Finally, complementary logic circuits, i.e., NOT, NAND, and NOR, are fabricated by assembling p-dominant IDSTIC and n-dominant IDSIC-4Cl OFETs. Therefore, a simple and efficient molecular design strategy for fine tuning the charge polarity and charge transport properties of OFET devices is presented.

Modular Synthesis of Furans with up to Four Different Substituents by a trans-Carboboration Strategy

Propargyl alcohols, on treatment with MHMDS (M=Na, K), B₂ (pin)₂ , an acid chloride and a palladium/copper co-catalyst system, undergo a reaction cascade comprised of trans-diboration, regioselective acylation, cyclization and dehydration to give trisubstituted furylboronic acid pinacol ester derivatives in good yields; subsequent Suzuki coupling allows a fourth substituent of choice to be introduced and hence tetrasubstituted (arylated) furans to be formed. In terms of modularity, the method seems unrivaled, not least because each product can be attained by two orthogonal but convergent ways ("diagonal split"). This asset is illustrated by the "serial" formation of a "library" of all twelve possible furan isomers that result from systematic permutation of four different substituents about the heterocyclic core.

Ion Exchange Gels Allow Organic Electrochemical Transistor Operation with Hydrophobic Polymers in Aqueous Solution

Conjugated-polymer-based organic electrochemical transistors (OECTs) are being studied for applications ranging from biochemical sensing to neural interfaces. While new polymers that interface digital electronics with the aqueous chemistry of life are being developed, the majority of high-performance organic transistor materials are poor at transporting biologically relevant ions. Here, the operating mode of an organic transistor is changed from that of an electrolyte-gated organic field-effect transistor (EGOFET) to that of an OECT by incorporating an ion exchange gel between the active layer and the aqueous electrolyte. This device works by taking up biologically relevant ions from solution and injecting more hydrophobic ions into the active layer. Using poly[2,5-bis(3-tetradecylthiophen-2-yl) thieno[3,2-b]thiophene] as the active layer and a blend of an ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, and poly(vinylidene fluoride-co-hexafluoropropylene) as the ion exchange gel, four orders of magnitude improvement in device transconductance and a 100-fold increase in kinetics are demonstrated. The ability of the ion-exchange-gel OECT to record biological signals by measuring the action potentials of a Venus flytrap is demonstrated. These results show the possibility of using interface engineering to open up a wider palette of organic semiconductors as OECTs that can be gated by aqueous solutions.

Scalable Ultrahigh-Speed Fabrication of Uniform Polycrystalline Thin Films for Organic Transistors

The fabrication of organic semiconductor thin films by printing technologies is expected to enable the low-cost production of devices such as flexible display drivers, RF-ID tags, and various chemical/biological sensors. However, large-scale high-speed fabrication of uniform semiconductor thin films with adequate electrical properties for these devices remains a big challenge. Herein, we demonstrate an ultrafast and scalable fabrication of uniform polycrystalline thin films with 100% surface coverage using liquid crystalline semiconductors such as 2-phenyl-7-decyl[1]benzothieno[3,2-b][1]benzothiophene (Ph-BTBT-10) and 2.7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT-C8), at a rate of 3 orders of magnitude higher than before, i.e., 40 mm/s (2.4 m/min) or more by dip-coating in the drainage regime. Organic transistors fabricated with polycrystalline thin films of Ph-BTBT-10 show average mobilities of 4.13 ± 0.75 cm²/(V s) in the bottom-gate-bottom-contact configuration and 10.90 ± 2.40 cm²/(V s) in the bottom-gate-top-contact configuration comparable to those of the devices prepared with single-crystalline thin films. More importantly, these films almost maintain the FET performance when the substrate size is extended up to 4 square inch. The present findings are available for other liquid crystalline semiconductors and bring us one step closer to the realization of printed electronics.

Synthesis, crystal structure, polymorphism and microscopic luminescence properties of anthracene derivative compounds

Anthracene derivative compounds are currently investigated because of their unique physical properties (e.g. bright luminescence and emission tunability), which make them ideal candidates for advanced optoelectronic devices. Intermolecular interactions are the basis of the tunability of the optical and electronic properties of these compounds, whose prediction and exploitation benefit from knowledge of the crystal structure and the packing architecture. Polymorphism can occur due to the weak intermolecular interactions, requiring detailed structural analysis to clarify the origin of observed material property modifications. Here, two silylethyne-substituted anthracene compounds are characterized by single-crystal synchrotron X-ray diffraction, identifying a new polymorph in the process. Additionally, laser confocal microscopy and fluorescence lifetime imaging microscopy confirm the results obtained by the X-ray diffraction characterization, i.e. shifting the substituents towards the external benzene rings of the anthracene unit favours π-π interactions, impacting on both the morphology and the microscopic optical properties of the crystals. The compounds with more isolated anthracene units feature shorter lifetime and emission spectra, more similar to those of isolated molecules. The crystallographic study, supported by the optical investigation, sheds light on the influence of non-covalent interactions on the crystal packing and luminescence properties of anthracene derivatives, providing a further step towards their efficient use as building blocks in active components of light sources and photonic networks.

Alkyne-Alkene [2 + 2] cycloaddition based on visible light photocatalysis

UV-activated alkyne-alkene [2 + 2] cycloaddition has served as an important tool to access cyclobutenes. Although broadly adopted, the limitations with UV light as an energy source prompted us to explore an alternative method. Here we report alkyne-alkene [2 + 2] cycloaddition based on visible light photocatalysis allowing the synthesis of diverse cyclobutenes and 1,3-dienes via inter- and intramolecular reactions. Extensive mechanistic studies suggest that the localized spin densities at sp2 carbons of alkenes account for the productive sensitization of alkenes despite their similar triplet levels of alkenes and alkynes. Moreover, the efficient formation of 1,3-dienes via tandem triplet activation of the resulting cyclobutenes is observed when intramolecular enyne cycloaddition is performed, which may serve as a complementary means to the Ru(II)-catalyzed enyne metathesis. In addition, the utility of the [2 + 2] cycloaddition has been demonstrated by several synthetic transformations including synthesis of various extended π-systems.