Nonclassical Applications of closo-Carborane Anions: From Main Group Chemistry and Catalysis to Energy Storage

Classically closo-carborane anions, particularly [HCB₁₁H₁₁]^- and [HCB₉H₉]^-, and their derivatives have primarily been used as weakly coordinating anions to isolate reactive intermediates, platforms for stoichiometric and catalytic functionalization, counteranions for simple Lewis acid catalysis, and components of materials like liquid crystals. The aim of this article is to educate the reader on the contemporary nonclassical applications of these anions. Specifically, this review will cover new directions in main group catalysis utilized to achieve some of the most challenging catalytic reactions such as C-F, C-H, and C-C functionalizations that are difficult or impossible to realize with transition metals. In addition, the review will cover the utilization of the clusters as dianionic C σ-bound ligands for coordination chemistry, ligand substituents for coordination chemistry and advanced catalyst design, and covalently bound spectator substituents to stabilize radicals. Furthermore, their applications as solution-based and solid-state electrolytes for Li, Na, and Mg batteries will be discussed.

Ir-catalyzed selective reduction of CO2 to the methoxy or formate level with HSiMe(OSiMe3)2

Ir-NSi-based catalysts allow controlling the selective reduction of CO₂ with HSiMe(OSiMe₃)₂ to afford methoxysilane or silyl formate.

Cationic Complexes of Boron and Aluminum: An Early 21st Century Viewpoint

Boron and aluminum are lighter Group 13 elements, found in daily life commodities, and considered environmentally benign. Nevertheless, they markedly differ in their elemental properties (e.g., metal character, atomic radius). The use of Lewis acidic complexes of boron and aluminum for methods of bond activation and catalysis (e.g., hydrogenation of unsaturated substrates, polymerization of olefins and epoxides) is quickly expanding. The introduction of cationic charge may boost the metalloid-centered Lewis acidity and allow for its fine-tuning particularly with regard to preference for "hard" or "soft" Lewis bases (i.e., substrates). Especially the isolation of low-coordinate cations (number of ligand atoms smaller than four) demands elaborate techniques of thermodynamic and kinetic stabilization (i.e., electronic saturation and steric shielding) by a ligand system. Furthermore, the properties of the solvent and the counteranion must be considered with care. Here, selected examples of boron and aluminum cations are described.

Thermodynamic versus kinetic control in substituent redistribution reactions of silylium ions steered by the counteranion

An in-depth experimental and theoretical study of the substituent exchange reaction of silylium ions is presented. Apart from the substitution pattern at the silicon atom, the selectivity of this process is predominantly influenced by the counteranion, which is introduced with the trityl salt in the silylium ion generation. In contrast to Müller's protocol for the synthesis of triarylsilylium ions under kinetic control, the use of Reed's carborane anions leads to contact ion pairs, allowing selective formation of trialkylsilylium ions under thermodynamic control. DFT calculations finally revealed an unexpected mechanism for the rate-determining alkyl exchange step, which is initiated by an unusual 1,2-silyl migration in the intermediate ipso-disilylated arenium ion. The resulting ortho-disilylated arenium ion can then undergo an alkyl transfer via a low-barrier five-centered transition state.

Computational mechanistic study of Ru-catalyzed CO2 reduction by pinacolborane revealing the σ-π coupling mechanism for CO2 decarbonylation

It has been reported that RuH2(η2-H2)2(PCy3)2 (1) could mediate CO2 reduction by pinacolborane (HBpin), affording pinBOBpin (7), pinBOCH3 (8), pinBOCHO (9), pinBOCH2OBpin (10), and an unprecedented C2 species pinBOCH2OCHO (11), which meanwhile is converted to the Ru complexes, including the transient 3 (RuH(κ2-O2CH)(CO)(PCy3)2) and 5 (RuH{(μ-H)2Bpin}(CO)(PCy3)2), and the persistent 4 (RuH(κ2-O2CH)(CO)2(PCy3)2) and 6 (RuH2(CO)2(PCy3)2). To gain an insight into the catalysis, a DFT study was carried out. The study identified the key active catalyst to be the hydride 13 (RuH2(CO)(PCy3)2) and characterized the mechanisms leading to the experimentally observed species (3-11). By investigating the experimental system, we learned a new mechanism called σ-π coupling for CO2 decarbonylation. Under this mechanism, CO2 and HBpin first co-coordinate to the Ru center of 13, then σ-π coupling takes place, forming a B-O bond between CO2 and HBpin, Ru-H and Ru-C bonds, and simultaneously breaking the H-Bpin bond, followed by -OBpin group migration to the Ru center, completing the CO2 decarbonylation. An interesting feature regarding the Ru catalysis was the involvement of η1-Hη1-H → η2-H2 and η1-Hη1-Bpin → η2-HBpin reductions, which facilitated the oxidative H-Bpin addition or the coordination mode change of CO2 from η1-O to η2-CO for CO2 activation or σ-π coupling. The facilitation effects could be attributed to the reductions enhancing the electron donations from the Ru center to the antibonding orbitals of the activating bonds.

Insight into catalytic reduction of CO2 to methane with silanes using Brookhart's cationic Ir(iii) pincer complex

Using density functional theory computations, we investigated in detail the underlying reaction mechanism and crucial intermediates present during the reduction of carbon dioxide to methane with silanes, catalyzed by the cationic Ir-pincer complex ((POCOP)Ir(H)(acetone)+, POCOP = 2,6-bis(dibutylphosphinito)phenyl). Our study postulates a plausible catalytic cycle, which involves four stages, by sequentially transferring silane hydrogen to the CO2 molecule to give silylformate, bis(silyl)acetal, methoxysilane and the final product, methane. The first stage of reducing carbon dioxide to silylformate is the rate-determining step in the overall conversion, which occurs via the direct dissociation of the silane Si-H bond to the C[double bond, length as m-dash]O bond of a weakly coordinated Ir-CO2 moiety, with a free energy barrier of 29.5 kcal mol-1. The ionic SN2 outer-sphere pathway in which the CO2 molecule nucleophilically attacks at the η1-silane iridium complex to cleave the η1-Si-H bond, followed by the hydride transferring from iridium dihydride [(POCOP)IrH2] to the cation [O[double bond, length as m-dash]C-OSiMe3]+, is a slightly less favorable pathway, with a free energy barrier of 33.0 kcal mol-1 in solvent. The subsequent three reducing steps follow similar pathways: the ionic SN2 outer-sphere process with silylformate, bis(silyl)acetal and methoxysilane substrates nucleophilically attacking the η1-silane iridium complex to give the ion pairs [(POCOP)IrH2] [HC(OSiMe3)2]+, [(POCOP)IrH2] [CH2(OSiMe3)2(SiMe3)]+, and [(POCOP)IrH2] [CH3O(SiMe3)2]+, respectively, followed by the hydride transfer process. The rate-limiting steps of the three reducing stages are calculated to possess free energy barriers of 12.2, 16.4 and 22.9 kcal mol-1, respectively. Furthermore, our study indicates that the natural iridium dihydride [(POCOP)IrH2] generated along the ionic SN2 outer-sphere pathway could greatly facilitate the silylation of CO2, with a potential energy barrier calculated at a low value of 16.7 kcal mol-1.

A new anthraquinoid ligand for the iron-catalyzed hydrosilylation of carbonyl compounds at room temperature: new insights and kinetics

The synthesis and characterization of a highly active Fe(ii) catalyst for the hydrosilylation of aldehydes and ketones have been described.

Formylation or methylation: what determines the chemoselectivity of the reaction of amine, CO2, and hydrosilane catalyzed by 1,3,2-diazaphospholene?

DFT computations have been performed to gain insight into the mechanisms of formylation/methylation of amines (e.g. methylaniline (1a)/2,2,4,4-tetramethylpiperidine (2a)) with CO2 and hydrosilane ([Si]H2, [Si] = Ph2Si), catalyzed by 1,3,2-diazaphospholene ([NHP]H). Different from the generally proposed sequential mechanism for the methylation of amine with CO2, i.e. methylation proceeds via formylation, followed by further reduction of formamide to give an N-methylated amine, the study characterized a competition mechanism between formylation and methylation. The chemoselectivity originates from the competition between the amine and [NHP]H hydride to attack the formyloxy carbon of [Si](OCHO)2 (the insertion product of CO2 into [Si]H2). When the attack of an amine (e.g.1a) wins, the transformation affords formamide (1b) but would otherwise (e.g.2a) result in an N-methylated amine (2c). The reduction of formamide by [Si]H2 or [NHP]H is highly unfavorable kinetically, thus we call attention to the sequential mechanism for understanding the methylation of amine with CO2. In addition, the study has the following key mechanistic findings. The activation of CO2 by [NHP]H establishes an equilibrium: [NHP]H + CO2 ⇄ [NHP]OCHO ⇄ [NHP]+ + HCO2-. The ions play catalytic roles to promote formylation via HCO2- or methylation via[NHP]+ . In 1a formylation, HCO2- initiates the reaction, giving 1b and silanol byproducts. However, after the initiation, the silanol byproducts acting as hydrogen transfer shuttles are more effective than HCO2- to promote formylation. In 2a methylation, [NHP]+ promotes the generation of the key species, formaldehyde and a carbocation species (IM17+ ). Our experimental study corroborates our computed mechanisms.

Transition-Metal-Free Cleavage of CO

Tertiary silane 1H , 2-[(diphenylsilyl)methyl]-6-methylpyridine, reacts with tris(pentafluorophenyl)borane (BCF) to form the intramolecular pyridine-stabilized silylium 1+ -HBCF. The corresponding 2-[(diphenylsilyl)methyl]pyridine, lacking the methyl-group on the pyridine ring, forms classic N(py)→B adduct 2H -BCF featuring an intact silane Si-H fragment. Complex 1+ -HBCF promotes cleavage of the C≡O triple bond in carbon monoxide with double C-Csp2 bond formation, leading to complex 3 featuring a B-(diarylmethyl)-B-aryl-boryloxysilane fragment. Reaction with pinacol generates bis(pentafluorophenyl)methane 4 as isolable product, proving the transition-metal-free deoxygenation of carbon monoxide by this main-group system. Experimental data and DFT calculations support the existence of an equilibrium between the silylium-hydroborate ion pair and the silane-borane mixture that is responsible for the observed reactivity.

B(C6F5)3-Catalyzed C-Si/Si-H Cross-Metathesis of Hydrosilanes

The substituent redistribution of hydrosilanes on silicon through C-Si and Si-H bond cleavage and reformation is of great interest and importance, but this transformation is usually difficult to achieve in a selective fashion. By using electron-rich aromatic hydrosilanes, we have achieved for the first time the selective C-Si/Si-H bond homo- and cross-metathesis of a series of hydrosilanes in the presence of a boron catalyst B(C₆F₅)₃. This protocol features simple reaction conditions, high chemoselectivity, wide substrate scope, and high functionality tolerance, offering a new pathway for the synthesis of multisubstituted functional silanes.

CO-Reduction Chemistry: Reaction of a CO-Derived Formylhydridoborate with Carbon Monoxide, with Carbon Dioxide, and with Dihydrogen

Treatment of the bulky metallocene hydride Cp*₂Zr(H)OMes (Cp* = pentamethylcyclopentadienyl, Mes = mesityl) with Piers' borane [HB(C₆F₅)₂] and carbon monoxide (CO) gave the formylhydridoborate complex [Zr]-O═CH-BH(C₆F₅)₂ ([Zr] = Cp*₂Zr-OMes). From the dynamic NMR behavior, its endergonic equilibration with the [Zr]-O-CH₂-B(C₆F₅)₂ isomer was deduced, which showed typical reactions of an oxygen/boron frustrated Lewis pair. It was trapped with CO to give an O-[Zr] bonded borata-β-lactone. Trapping with carbon dioxide (CO₂) gave the respective O-[Zr] bonded cyclic boratacarbonate product. These reaction pathways were analyzed by density functional theory calculation. The formylhydridoborate complex was further reduced by dihydrogen via two steps; it reacted rapidly with H₂ to give Cp*₂Zr(OH)OMes and H₃C-B(C₆F₅)₂, which then slowly reacted further with H₂ to eventually give [Zr]-O(H)-B(H)(C₆F₅)₂ and methane (CH₄). Most complexes were characterized by X-ray diffraction.

Reduction of carbon dioxide and organic carbonyls by hydrosilanes catalysed by the perrhenate anion

A simple quaternary ammonium perrhenate salt catalyses the hydrosilylation of aldehydes, ketones, and carbon dioxide, and the methylation of amines using carbon dioxide. DFT calculations show that a perrhenate hypervalent silicate interacts directly with CO₂.

A cationic aluminium complex: an efficient mononuclear main-group catalyst for the cyanosilylation of carbonyl compounds

Main-group catalysis: A cationic aluminium complex supported by a semi-bulky aminotroponate ligand was synthesized. It functioned as an excellent catalyst of the cyanosilylation of carbonyl compounds using TMSCN.

Heterogeneous reduction of carbon dioxide by hydride-terminated silicon nanocrystals

Silicon constitutes 28% of the earth's mass. Its high abundance, lack of toxicity and low cost coupled with its electrical and optical properties, make silicon unique among the semiconductors for converting sunlight into electricity. In the quest for semiconductors that can make chemicals and fuels from sunlight and carbon dioxide, unfortunately the best performers are invariably made from rare and expensive elements. Here we report the observation that hydride-terminated silicon nanocrystals with average diameter 3.5 nm, denoted ncSi:H, can function as a single component heterogeneous reducing agent for converting gaseous carbon dioxide selectively to carbon monoxide, at a rate of hundreds of μmol h⁻¹ g⁻¹. The large surface area, broadband visible to near infrared light harvesting and reducing power of SiH surface sites of ncSi:H, together play key roles in this conversion. Making use of the reducing power of nanostructured hydrides towards gaseous carbon dioxide is a conceptually distinct and commercially interesting strategy for making fuels directly from sunlight.

Elemental silicon is widely studied for photovoltaic applications. Here, the authors report that hydride-terminated silicon nanocrystals can also function as single component heterogeneous reducing agent for converting gaseous carbon dioxide selectively to carbon monoxide.

Selective Metal-Free Hydrosilylation of CO2 Catalyzed by Triphenylborane in Highly Polar, Aprotic Solvents

Triphenylborane (BPh3 ) in highly polar, aprotic solvents catalyzes hydrosilylation of CO2 effectively under mild conditions to provide silyl formates with high chemoselectivity (>95 %) and without over-reduction. This system also promotes reductive hydrosilylation of tertiary amides as well as dehydrogenative coupling of silane with alcohols.

Selective reduction of carbon dioxide to bis(silyl)acetal catalyzed by a PBP-supported nickel complex

The selective reduction of CO₂ to the formaldehyde level remains an important challenge and to date only a few catalysts have been developed for this reaction.

Complexes of the tripodal phosphine ligands PhSi(XPPh2)3(X = CH2, O): synthesis, structure and catalytic activity in the hydroboration of CO2

The coordination chemistry of Fe²⁺, Co²⁺and Cu⁺ions was explored with the ligands PhSi{CH₂PPh₂}₃(1) and PhSi{OPPh₂}₃(2), so as to evaluate the impact of the electronic properties of the tripodal phosphorus ligands on the structure and reactivity of the corresponding complexes.

A kinetic study on the reduction of CO2 by frustrated Lewis pairs: from understanding to rational design

A kinetic study on the reduction of CO₂ by frustrated Lewis pairs. Increasing the strength of FLPs results in decreasing the energy barriers for H₂ activation, while increasing the energy barriers for H transfer.

Tuning the activity and selectivity of iridium-NSiN catalyzed CO2 hydrosilylation processes

Catalyst design for iridium-catalyzed CO₂ hydrosilylation processes: improvement of the selectivity and reduction of the reaction time.

Hydrophosphination of CO2 and subsequent formate transfer in the 1,3,2-diazaphospholene-catalyzed N-formylation of amines

Hydrophosphination of CO2 with 1,3,2-Diazaphospholene (NHP-H; 1) afforded phosphorus formate (NHP-OCOH; 2) through the formation of a bond between the electrophilic phosphorus atom in 1 and the oxygen atom from CO2 , along with hydride transfer to the carbon atom of CO2 . Transfer of the formate from 2 to Ph2 SiH2 produced Ph2 Si(OCHO)2 (3) in a reaction that could be carried out in a catalytic manner by using 5 mol % of 1. These elementary reactions were applied to the metal-free catalytic N-formylation of amine derivatives with CO2 in one pot under ambient conditions.