Multiple Anti‐Counterfeiting Guarantees from a Simple Tetraphenylethylene Derivative – High‐Contrasted and Multi‐State Mechanochromism and Photochromism

Photochromic and Electrochromic Hydrogels Based on Ammonium- and Sulfonate-Functionalized Thienoviologen Derivatives

Ammonium cations and sulfonate anions have been introduced as end-caps for alkyl viologens with thiophene-derived bridges. When the as-prepared thienoviologen derivatives are dispersed in polyacrylamide (PAAm) hydrogels, photochromic (PC) and electrochromic (EC) bifunctional hydrogels can be simply realized. The incorporated thiophene or ethylenedioxylthiophene bridge not only expands the photoresponse range but also stabilizes the photoinduced radical intermediate. Therefore, reversible PC and EC behaviors can be achieved for hydrogels containing thienoviologens N,N'-di(3-(trimethylammonio)propyl)-4,4'-(thien-2,5-diyl)bispyridinium tetrabromide (ATV), N,N'-bis(3-sulfonatopropyl)-4,4'-(thien-2,5-diyl)bispyridinium (STV), N,N'-di(3-(trimethylammonio)propyl)-4,4'-(3,4-ethylenedioxylthien-2,5-diyl)bispyridinium tetrabromide (AETV), and N,N'-bis(3-sulfonatopropyl)-4,4'-(3,4-ethylenedioxylthien-2,5-diyl)bispyridinium (SETV). On the contrary, no photochromism can be observed for PAAm hydrogels based on N,N'-di(3-(trimethylammonio)propyl)-4,4'-bipyridinium tetrabromide (AV) and N,N'-bis(3-sulfonatopropyl)-4,4'-bipyridinium (SV) without thiophene bridges. Furthermore, no significant coloration difference can be observed between the hydrogels containing ammonium- and sulfonate-functionalized viologens. However, during repetitive cycles, the transmittance contrast losses of electrochromic devices (ECDs) based on the hydrogels containing ammonium-modified viologens are lower than those for sulfonate-substituted viologens probably due to their larger number of cation-anion pairs and thus higher solubility in aqueous media. Typically, no observable difference can be found for unsealed ECDs after 15 days in ambient conditions. Additionally, a large-area ECD with a diameter of 10 cm has been facilely fabricated by simply sandwiching the EC hydrogels, and the transparency can be finely tuned upon applying different potentials. Overall, our findings may provide a new path to design multifunctional hydrogels with PC and EC responses.

Interfacial AIE for Orthogonal Integration of Holographic and Fluorescent Dual-Thermosensitive Images

Orthogonal integration of thermosensitive images is of vital significance for advanced anticounterfeiting, which however remains formidably challenging due to the trade-off that facile thermoresponse needs easy molecular motion while robust imaging requires molecular restriction. Herein, a viable approach is demonstrated to tackle the challenge by in situ fixing a predesigned aggregation induced emission luminogen (AIEgen) at the polymer/liquid crystal (LC) interface via precisely controlled interfacial engineering, in which the AIEgen is enriched in LC phases during polymerization induced phase separation and subsequently driven to the interface by the interfacial thiol-ene click reaction. Crosstalk-free integration of holographic and fluorescent dual-thermosensitive images with high sensitivity, high contrast ratio, and robust performance is successfully realized in a single unit, attributed to the simultaneously LC-facilitated AIEgen molecular motion and polymer-restricted AIEgen diffusion at the interface. The exciting characteristics of these orthogonally integrated dual images will enable them to prevent illegal replication and thus are expected to be promising for high-security-level anticounterfeiting applications.

Pressure-Induced Restricting Intermolecular Vibration of a Herringbone Dimer for Significantly Enhanced Multicolor Emission in Rotor-Free Truxene Crystals

Organic solid-state luminescent materials exhibit numerous exciting photoelectric properties that are central to emergent organic light-emitting diodes, smart sensors, and data encryption. However, the luminescence of pure organic rotor-free materials has been afflicted with strong intermolecular π-π stacking interactions. Herein, an unprecedented pressure-induced emission enhancement (PIEE) is realized in a system of rigid planar pure polycyclic aromatics, i.e., truxene crystals. The emission intensity is enhanced 7-fold below 3.0 GPa with a photoluminescence quantum yield increased to 10.17% compared with the initial value of 1.78%, and the emission colors change from green (520 nm) to red (640 nm) within 11.8 GPa. Spectral characterizations and first-principles calculations reveal that the PIEE and piezochromism can mainly be attributed to the restricted intermolecular vibration and the decreased energy gap. Our findings enrich the PIEE mechanism and provide a new guideline for designing pressure-responsive luminescent materials in advancing their photoelectric applications.

Upconversion Nanoparticle-Integrated Bilayer Inverse Opal Photonic Crystal Film for the Triple Anticounterfeiting

Optical anticounterfeiting plays a vital role in information security because it can be recognized by the naked eye and is difficult to imitate. Herein, a hydrophilic modified upconversion nanoparticle (M-UCNP)-integrated bilayer inverse opal photonic crystal (IOPC) film was designed in which the luminescent M-UCNPs were deposited on the surface of the optimized bilayer structure with double photonic stop bands. The structure which can modulate light to produce structural colors can also enhance the upconversion luminescence (UCL) to improve the anticounterfeiting effect synergistically. On the one hand, the reflection colors from green to blue were observed in the specular angles on the front (540-layer) of the film. Meanwhile, the scattering colors under nonspecular angles from red to blue on the back (808-layer) appeared in the natural light. On the other hand, the bilayer structure in which the 808-layer functions as a "secondary excitation source" to improve the intensity of the excitation light on M-UCNPs and the 540-layer reflects the emission light of the M-UCNPs to enhance the UCL intensity endows the film with good night vision ability. Finally, the dual-mode structural colors and enhanced UCL of the patterned film work together to realize triple anticounterfeiting in banknotes.

Mechanical stimuli-induced multiple photophysical responsive AIEgens with high contrast properties

A new cyano-distyrylbenzene derivative with a mechano-force induced high contrast transition in color and emission was demonstrated here. Under mechanical stimuli, the emission peak can undergo a large wavelength shift from 440 nm to 650 nm, while the appearance color can switch from white to pink.

Multicolor Light Mixing in Optofluidic Concave Interfaces for Anticounterfeiting with Deep Learning Authentication

Anticounterfeiting technology has received tremendous interest for its significance in daily necessities, medical industry, and high-end products. Confidential tags based on photoluminescence are one of the most widely used approaches for their vivid visualization and high throughput. However, the complexity of confidential tags is generally limited to the accessibility of inks and their spatial location; generating an infinite combination of emission colors is therefore a challenging task. Here, we demonstrate a concept to create complex color light mixing in a confined space formed by microscale optofluidic concave interfaces. Infinite color combination and capacity were generated through chaotic behavior of light mixing and interaction in an ininkjet-printed skydome structure. Through the chaotic mixing of emission intensity, wavelength, and light propagation trajectories, the visionary patterns serve as a highly unclonable label. Finally, a deep learning-based machine vision system was built for the authentication process. The developed anticounterfeiting system may provide inspiration for utilizing space color mixing in optical security and communication applications.

Development of Rofecoxib-Based Fluorophores from ACQ to AIE by Positional Regioisomerization

The development of aggregation-induced emission luminogens (AIEgens) has attracted increasing attention due to their potential applications in various areas in recent years. In this study, a facile conversion from aggregation-caused quenching (ACQ) to aggregation-induced emission (AIE) was achieved by an efficient regioisomerization strategy based on the rofecoxib scaffold. Two compounds, named PYR2 and PYR4, were identified as regioisomers of rofecoxib derivatives to show dramatically different fluorescent properties. Compound PYR2 with an ortho-substituted piperidine group showed typical AIE activity while compound PYR4 with a para-piperidine group exhibited typical ACQ behavior. Notably, compound PYR2 showed polymorphism with two forms of crystals. It was also endowed with reversible mechanochromic luminescence and acidochromic properties. The different fluorescent properties were elucidated by UV/Vis absorption spectroscopy, powder X-ray diffraction, differential scanning calorimetry, and thermogravimetric analyses. Its application as a security ink and in lipid droplets imaging have been demonstrated.

Dual pH-/Photo-Responsive Color Switching Systems for Dynamic Rewritable Paper

Smart color switching materials that can change color with a fast response and a high reversibility have attracted increasing attention in color-on-demand applications. However, most of them can only respond to a single stimulus from their external environment, which dramatically limits their broad applications. To address this problem, we report a new strategy in developing a dual pH-/photo-responsive color switching system by coupling the pH-dependent and redox-driven color switchable neutral red (NR) with photoreductive TiO_2-x nanoparticles. The biodegradable TiO_2-x nanoparticles/NR/agarose gel film shows a rapid color switching between yellow and red upon stimulation with acidic/basic vapors in more than 20 cycles because of the protonation and deprotonation process of NR. Moreover, the film shows interesting photoreversible color switching properties under both acidic and basic conditions, including a fast response time and a high reversibility. Taking advantage of the excellent dual pH-/photo-responsive color switching properties, we demonstrated the potential applications of the TiO_2-x nanoparticles/NR/agarose gel film in dynamic rewritable paper, in which the created patterns by photo-printing produce dynamic color changing upon applying an acidic or a basic vapor. We believe that the result will enable a new path for the development of dual- and even multi-responsive color switching systems, broadening their new applications.

Highly Emissive Multipurpose Organoplatinum(II) Metallacycles with Contrasting Mechanoresponsive Features

The development of supramolecular coordination complexes (SCCs) with a bright aggregate state or mechanical-stimuli-responsive luminescence is very significant and challenging. Herein, we report the synthesis of three different supramolecular platinum(II) metallacycles via coordination-driven self-assembly of a diplatinum(II) acceptor and organic donors with a triphenylamine, carbazole, or tetraphenylethylene moiety. The triphenylamine-modified SCC exhibits aggregation-induced emission enhancement (AIEE) but no mechanofluorochromism. The carbazole and tetraphenylethylene-based SCCs exhibit changes in aggregate fluorescence and also exhibit reversible mechanofluorochromism. This work not only reports three rare metallacycles with AIEE, aggregate fluorescence change, or mechanofluorochromic nature but also explores their potential applications in cell imaging and solid-state lighting.

Preparation and properties of a polyurethane film based on novel photochromic spirooxazine chain extension

A smart polyurethane material with good photoresponsiveness and reversible surface wettability based on a photoresponsive chain extender (SO–OH).

A double-spiro ring-structured mechanophore with dual-signal mechanochromism and multistate mechanochemical behavior: non-sequential ring-opening and multimodal analysis

We have developed a novel aminobenzopyranoxanthene-based mechanophore with a dual-signal response and two mechanogenerated ring-opened isomers, of which the relative distribution is modulated by external force based on the heat–force equilibrium.

Suppression of reversible photocyclization reaction induced fluorescence enhancement: a theoretical study

The fluorescence intensity of SIP-2 and DPI under different environments are mainly related to the competition between the PC reaction and aggregation induced restriction of phenyl ring rotational motions.

Synthesis and application of near-infrared dyes based on sulfur-substituted dicyanomethylene-4H-chromene and diarylethene

Four novel compounds (S-DCM-1O, S-DCM-2O, S-DCM-3O, and S-DCM-4O) based on sulfur-substituted dicyanomethylene-4H-chromene (S-DCM) and diarylethene were synthesized. The detailed investigations on the fluorescence spectra, absorption spectra, time-dependent density functional theory...

Reversible Photochromic Coordination Polymer by Phototriggered Subtle Molecular Conformation Variations

Photochromic materials are constructed with molecules accompanied by structural change after triggering by light, which are of great importance and necessity for various applications. However, because of space-confinement effects, molecule stacking of these photoresponsive chromophores within coordination polymers (CPs) always results in an efficiency decrement and a response delay, and this phenomenon will lead to a poor photochromic property. Herein, a CP (named CIT-E) with a 3-fold-interpenetrating network structure, which was prepared with (Z)-1,2-diphenyl-1,2-bis[4-(pyridin-3-ylmethoxy)phenyl]ethene (1Z) and a CuI cluster, showed fast reversible photochromic behavior. Under UV-light illumination, the color of CIT-Z changed from pale yellow to reddish brown. With the illumination of green light, the polymer could return to its initial color within 10 s. To reveal the mechanism of reversible photochromic behavior of CIT-Z, single-crystal structures of each color state were fully studied, and other scientific study methods were also used, such as time-dependent density functional theory calculation and control experiments. It was found that, with light illumination, this behavior of CIT-Z was the result of a ligand-to-metal charge-transfer process, and this process was triggered by subtle molecular conformation variation of tetraphenylethylene. It should be noted that CIT-Z has high thermal and chemical stability, which are excellent advantages as smart photoresponsive materials. As a proof of concept, a uniform thin film with such a fascinating photochromic property allows applications in invisible anticounterfeiting and dynamic optical data storage. Overall, the present study opens up a new avenue toward reversible photochromic materials.

Modular and stereoselective synthesis of tetrasubstituted vinyl sulfides leading to a library of AIEgens

Tetraarylethylenes exhibit intriguing photophysical properties and sulfur atom frequently play a vital role in organic photoelectric materials and biologically active compounds. Tetrasubstituted vinyl sulfides, which include both sulfur atom and tetrasubstituted alkenes motifs, might be a suitable skeleton for the discovery of the new material molecules and drug with unique functions and properties. However, how to modular synthesis these kinds of compounds is still challenging. Herein, a chemo- and stereo-selective Rh(II)-catalyzed [1,4]-acyl rearrangements of α-diazo carbonyl compounds and thioesters has been developed, providing a modular strategy to a library of 63 tetrasubstituted vinyl sulfides. In this transformation, the yield is up to 95% and the turnover number is up to 3650. The mechanism of this reaction is investigated by combining experiments and density functional theory calculation. Moreover, the "aggregation-induced emission" effect of tetrasubstituted vinyl sulfides were also investigated, which might useful in functional material, biological imaging and chemicalnsing via structural modification.

Aggregation-Induced Emission Luminogens with Photoresponsive Behaviors for Biomedical Applications

Fluorescent biomedical materials can visualize subcellular structures and therapy processes in vivo. The aggregation-induced emission (AIE) phenomenon helps suppress the quenching effect in the aggregated state suffered by conventional fluorescent materials, thereby contributing to design strategies for fluorescent biomedical materials. Photoresponsive biomedical materials have attracted attention because of the inherent advantages of light; i.e., remote control, high spatial and temporal resolution, and environmentally friendly characteristics, and their combination with AIE facilitates development of fluorescent molecules with efficient photochemical reactions upon light irradiation. In this review, organic compounds with AIE features for biomedical applications and design strategies for photoresponsive AIE luminogens (AIEgens) are first summarized briefly. Applications are then reviewed, with the employment of photoresponsive and AIE-active molecules for photoactivation imaging, super-resolution imaging, light-induced drug delivery, photodynamic therapy with photochromic behavior, and bacterial targeting and killing being discussed at length. Finally, the future outlook for AIEgens is considered with the aim of stimulating innovative work for further development of this field.

Recent Development of Photodeformable Crystals: From Materials to Mechanisms

Photodeformable materials are a class of molecules that can convert photon energy into mechanical energy, which have attracted tremendous attention in the last few decades. Owing to their unique photoinduced deformable properties, including fast light-response and diverse mechanical behaviors, photodeformable materials have exhibited great potential in many practical applications such as actuators, photoswitches, artificial muscles, and bioimaging. In this review, we sort out the current state of photodeformable crystals and classify them into six categories by molecular structures: diarylethenes, azobenzenes, anthracenes, olefins, triarylethylenes, and other systems. Three distinct light-responsive mechanisms, photocyclization, trans-cis isomerization, and photodimerization, are revealed to play significant roles in the molecular photodeformation. Their corresponding photodeformable behaviors such as twisting, bending, hopping, bursting, and curling, as well as the potential applications, are also discussed. Furthermore, the challenges and prospective development directions of photodeformable crystals are highlighted.

Super Strong and Tough Polybenzimidazole/Metal Ions Coordination Networks: Reinforcing Mechanism, Recyclability, and Anti-Counterfeiting Applications

Nature has provided many delicate strategies for optimizing the structural characteristics of biological materials. One such strategy is the strengthening and toughening of matrix materials by aduandant and hierarchically arranged non-covalent crosslinking. However, efficient strengthening and toughening of high-performance aromatic polymers by non-covalent bonds has rarely been reported yet. Herein, we report the preparation and characterizations of a metal coordination bonds crosslinked polybenzimidazole (PBI) network. By optimizing the synthetic parameters, the strength of copper ion (Cu²⁺ ) crosslinked PBI is improved from 87.8 to 218.4 MPa, and the toughness is increased from 19.4 to 111.9 MJ m^-3 , corresponding to increments of 148.7 % and 476.8 %, respectively, which surpass all previously reported non-covalent bonds crosslinked high-performance polymers. PBI with varied chain flexibility are then synthesized to deeply understand the stregnening and toughening mechanism. In addition, the glass transition temperature of PBI is dramatically increased by 75 °C after Cu²⁺ crosslinking. Moreover, the chemical recycling of PBI from crosslinekd network, and the development of a novel high-temperature resistant or high-temperature rewritable anti-counterfeiting films based on Cu²⁺ crosslinked PBI are also demonstrated. This study is expected to shed light on design principle for future supramolecularly crosslinked and recyclable high-performance polymers.

A Novel Strategy to Design and Construct AIE-active Mechanofluorochromic Materials via Regulation of Molecular Structure

In this work, we first designed and synthesized tetraphenylene-fused aryl-imidazole derivatives TM-1-4 via regulation of molecular structure, which were consisted of 1H-imidazo[4,5-f][1,10]phenanthroline, 1H-phenanthro[9,10-d]imidazole, 4,5-diphenyl-1H-imidazole, 3,3'-(1H-imidazole-4,5-diyl)dipyridine moieties and AIE-active tetraphenylethene units, respectively. The results illustrated that TM-1-4 exhibited clear AIE characteristics. Meanwhile, TM-2 and TM-3 show excellent solid emission properties (Φ_TM-2 =13.73 % and Φ_TM-3 =36.21 %), whereas TM-1 and TM-4 exhibit the opposite properties (Φ_TM-1 =1.48 % and Φ_TM-4 =4.83 %). The multiple rotors (pyridine and benzene ring) causes twisted conformations of the molecule that prevents π-π stacking and enhances solid emission(ΦTM-2<ΦTM-3, ΦTM-1<ΦTM-4). Significantly, TM-2 and TM-3 also exhibited reversible mechanochromic behavior (Emission red shifts: Δλ_TM-2 =43 nm and Δλ_TM-3 =41 nm) with color changes between blue and green emissions. The powder X-ray diffraction (PXRD) suggested the disordered state of ground sample could be readily returned to an ordered crystalline. Therefore, the mechanochromisms of TM-2 and TM-3 are ascribable to the phase transformation between crystal and amorphous structure. The single crystal X-ray analysis of TM-2 reveals a twisted conformation for TPE moiety and the absence of π-π intermolecular stacking. These excellent optical properties of TM-2 and TM-3 make them potentially applications in mechanochromic materials and imaging agents.

Trans/cis-stereoisomers of triterpenoid-substituted tetraphenylethene: aggregation-induced emission, aggregate morphology, and mechano-chromism

Trans/cis stereoisomers with multiple functionalities play an important role in chemistry and materials science. In this work, two pure stereoisomers (trans- and cis-TPE-2GA) of the tetraphenylethene (TPE) derivatives bi-substituted by a bio-resourced rigid triterpenoid and glycyrrhetinic acid (GA) were synthesized and characterized by 1D and 2D NMR, single crystal analysis, and HR-MS. Both trans- and cis-TPE-2GA are thermally stable even on heating at 160 °C for 30 min, whereas they can undergo trans-to-cis and cis-to-trans photoisomerization under similar UV illumination. The introduction of triterpenoid units endowed isomers with different aggregation-induced emission (AIE) and self-assembly properties and distinct crystallinity. Trans- and cis-TPE-2GA exhibit different evolution of the fluorescent intensity in water/acetone mixture with the increase in the water fraction, which are closely related to the different evolution of the aggregate morphology, from nanorods to nanospheres for trans-TPE-2GA, while from twisted ribbons, to nanotubes and nanospheres for cis-TPE-2GA. In the solid state, the mechano-chromic properties are shown by cis-TPE-2GA, while no mechano-chromic effect is observed for trans-TPE-2GA under the same grinding conditions because of their distinct crystallinity. Finally, theoretical calculation and photophysical study demonstrate that despite both isomers being assigned to the charge transfer state emission, cis-TPE-2GA has a slightly lower energy gap, a higher quantum yield, and a longer lifetime in comparison with trans-TPE-2GA, which explained their difference in the fluorescence and mechano-chromic properties. This work may improve the understanding of the TPE-based trans and cis stereoisomers, which will be beneficial in the design of novel TPE-based functional materials.

On-Demand Regulation of Photoreversible Color Switching for Rewritable Paper and Transient Information Encryption

The achievement of photoreversible color switching systems (PCSS) has offered great opportunities for fundamental studies and practical applications. However, the development of PCSS that possessing highly reversible cyclability and on-demand regulation of recoloration process remains a grand challenge. Herein, we report a hydrazine-mediated self-doping strategy for the synthesis of alkaline Ti³⁺ self-doped TiO_2-x nanoparticles, enabling the TiO_2-x nanoparticles/methylene blue based PCSS with long photoreversible cyclability and rapid color switching rate. The Ti³⁺ species as internal sacrificial electron donors significantly improve the photoreductive activity of TiO_2-x nanoparticles, which results in fast decoloration rate and long cycling number of the PCSS. Simultaneously, the alkaline property of TiO_2-x nanoparticles enhances the oxidation kinetics of the PCSS to dramatically accelerate the recoloration rate. Moreover, the PCSS can be integrated elaborately with biodegradable agarose to form flexible color switching films, which exhibit long-waited on-demand regulation of recoloration rate in a wide range. By taking advantage of photoreversible color switching and time-resolved color changing process, we demonstrate their potential application in self-erasing rewritable paper and transient optical information encryption. This work represents a new strategy for the future development of PCSS and their advanced applications.

Mechanochromic Luminescence of 2,6-Bis(4-biphenyl)isonicotinic Acid via Interconversion of Classical/Frustrated Brönsted Pair

A practicable strategy to a reversible mechanochromic material featuring interconversion of classical/frustrated Brönsted pairs has been established. We report the mechanochromic property of 2,6-bis(4-biphenyl)isonicotinic acid (1), which features a frustrated Brönsted pair in the crystalline form and a classical Brönsted pair after grinding. A large mechanochromic shift was found from 428 to 505 nm. In addition, compound 1 also exhibits acidochromic behavior, which further proves that the formation of an acid-base interaction is responsible for the mechanochromic phenomenon.

Molecular copper iodide clusters: a distinguishing family of mechanochromic luminescent compounds

Mechanochromic luminescent materials displaying switchable luminescence properties in response to external mechanical force are currently attracting wide interest because of their multiple potential applications. In the growing number of mechanochromic luminescent compounds, mechanochromic complexes based on copper present appealing features with a large variety of mechanochromic properties and economical advantages over other metals. Among Cu-based compounds, molecular copper iodide clusters of cubane geometry with formula [Cu₄I₄L₄] (L = organic ligand) stand out. Indeed, they can exhibit multiple luminescent stimuli-responsive properties, being particularly suitable for the development of multifunctional photoactive systems. This perspective describes the survey of these mechanochromic luminescent cubane copper iodide clusters. Based on our investigations, their mechanochromic luminescence properties are presented along with the study of the underlying mechanism. Establishment of structure-property relationships supported by various characterization techniques and associated with theoretical investigations permits gaining insights into the mechanism at play. Studies of other researcher groups are also described and illustrate the interest shown by these mechanochromic compounds. Mechanically responsive films are reported, demonstrating their potential use in a range of applications of such copper-based stimuli-responsive materials. Current challenges faced by the development of technological applications are finally outlined.

Achieving enhanced solid-state photochromism and mechanochromism by introducing a rigid steric hindrance group

For photochromic molecules, effective isomerization usually requires conformational freedom, which is usually unavailable under solvent-free conditions. In this work, we report a new method, which can realize the reversible switching of spiropyran molecules by introducing a rigid aromatic ring group and this method can provide the required free volume to transform from a closed-ring to an open-ring form. This new molecule can quickly change color in the solid state under ultraviolet light, and can be erased after being heated at 60 °C for about 5 minutes. Furthermore, this new compound presents mechanochromicity when a mechanical force is applied. What is more, it can be used for at least 30 cycles of print-erase operations without apparent fatigue. This new molecule exhibits improved photochromic and anti-fatigue properties in the solid state, which can promote its application in both ultraviolet printing and anti-counterfeiting materials.

Achieving highly efficient aggregation-induced emission, reversible and irreversible photochromism by heavy halogen-regulated photophysics and D-A molecular pattern-controlled photochemistry of through-space conjugated luminogens

It is extremely challenging but desirable to regulate the photophysical and photochemical processes of aggregation-induced emission luminogens (AIEgens) in distinct states in a controllable manner. Herein, we design two groups of AIEgens based on a triphenylacrylonitrile (TPAN) skeleton with through-space conjugation (TSC) property, demonstrate controlled regulation of photophysical emission efficiency/color and photochemical photochromic and photoactivatable fluorescence behaviours of these compounds, and further validate design principles to achieve highly efficient and emission-tuning AIEgens and to accomplish photo-dependent color switches and fluorescence changes. It is surprisingly found that the introduction of heavy halogens like bromine into a TPAN skeleton dramatically enhances the emission efficiency, and such an abnormal phenomenon against the heavy-atom effect is attributed to the specific through-space conjugation nature of the AIE-active skeleton, effective intermolecular halogen-bond-induced restriction of intramolecular motions, and heavy atom-induced vibration reduction. The incorporation of two electron-donating amino groups into the TPAN skeleton cause the luminogens to undergo a bathochromic shifted emission due to the formation of a D-A pattern. Apart from the regulation of photophysical processes in the solid state, the construction of the D-A pattern in luminogens also results in extremely different photochemical reactions accompanying reversible/irreversible photochromism and photoactivatable fluorescence phenomena in a dispersed state. It is revealed that photo-triggered cyclization and decyclization reactions dominantly contribute to reversible photochromism of the TPAN family, and the photo-induced cyclization-dehydrogenation reaction is responsible for the irreversible color changes and photoactivatable fluorescence behaviours of the NTPAN family. The demonstrations of multiple-mode signaling in photoswitchable patterning and information encryption highlight the importance of controlled regulation of photophysics and photochemistry of fused chromic and AIE-active luminogens in distinct states.

Stimuli-Responsive AIEgens

The unique advantages and the exciting application prospects of AIEgens have triggered booming developments in this area in recent years. Among them, stimuli-responsive AIEgens have received particular attention and impressive progress, and they have been demonstrated to show tremendous potential in many fields from physical chemistry to materials science and to biology and medicine. Here, the recent achievements of stimuli-responsive AIEgens in terms of seven most representative types of stimuli including force, light, polarity, temperature, electricity, ion, and pH, are summarized. Based on typical examples, it is illustrated how each type of systems realize the desired stimuli-responsive performance for various applications. The key work principles behind them are ultimately deciphered and figured out to offer new insights and guidelines for the design and engineering of the next-generation stimuli-responsive luminescent materials for more broad applications.

Production of photochromic nanocomposite film via spray-coating of rare-earth strontium aluminate for anti-counterfeit applications

New photochromic film was developed toward the preparation of anti-counterfeiting documents utilizing inorganic/organic nanocomposite enclosing a photoluminescent inorganic pigment and a polyacrylic binder polymer. To generate a translucent film from pigment/polyacrylic nanocomposite, the phosphorescent strontium aluminum oxide pigment should be well-dispersed in the solution of the polyacrylic-based binder without agglomeration. The photochromic nanocomposite was applied efficiently onto commercial cellulose paper documents utilizing the effective and economical spray-coating technology followed with thermofixation. A homogeneous photochromic film was immobilized onto cellulose paper surface to introduce a transparent film changing to greenish-yellow upon exposure to ultraviolet light as depicted by CIE coloration measurements. The photochromic effect was monitored at lowest pigment concentration (0.25 wt%). The spray-coated paper documents exhibit two absorbance bands at 256 and 358 nm, and two fluorescence peaks at 433 and 511 nm. The morphologies of the spray-coated documents were explored. The spray-coated paper sheets showed a reversible photochromic effect without fatigue under ultraviolet irradiation. The rheology of the produced photochromic composites as well as the mechanical properties and photostability of the spray-coated documents were studied.

Development of Diketopyrrolopyrrole-Based Smart Inks by Substituting Ionic Pendants and Engineering Molecular Packing Structures

A series of diketopyrrolopyrrole (DPP) luminogen amphiphiles were newly designed and synthesized by a single-step anionic exchange reaction for controlling the photoluminescence properties in both solution and solid states. Multicolor emission in response to thermal, mechanical, and chemical stimuli was successfully demonstrated by engineering well-defined supramolecular assemblies. Phase transformation from the metastable amorphous solid to the stable orthorhombic crystal of [DP-Im][Br] provided the reversibly patternable light emission. Self-organization into the smectic crystalline phase of [DP-Im][TFSI] allowed us to show the linearly polarized light emission. By simultaneously applying [DP-Im][Br] and [DP-Im][TFSI], we demonstrated the fabrication of smart sensors for packaging of food or vaccines that can detect thermal attacks.

Persistent room-temperature phosphorescence or high-contrast phosphorescent mechanochromism: polymorphism-dependent different emission characteristics from a single gold(I) complex

Luminophores with persistent room-temperature phosphorescence (p-RTP) or effective phosphorescent mechanochromism features have significant potential applications in the field of optoelectronic materials. Until now, p-RTP and remarkable phosphorescent mechanochromism phenomena have been observed in some luminescent molecules with different molecular structures. However, separately realizing p-RTP and high-contrast phosphorescent mechanochromism in different polymorphs from a single luminophore is still a valuable and challenging topic. In this work, two polymorphs 1B and 1YG of a new gold(i) complex with blue and yellow-green luminescence, respectively, are reported. Interestingly, 1B exhibits high-contrast phosphorescent mechanochromic behavior, while 1YG exhibits a persistent room-temperature phosphorescence effect. This is the first example of simultaneously obtaining double-purpose crystalline materials with a high-contrast phosphorescent mechanochromism or persistent room-temperature phosphorescence feature from a single luminophore.

Nature-inspired robust hydrochromic film for dual anticounterfeiting

Nature-inspired materials have been actively developed for anticounterfeiting applications. Among a variety of stimuli-responsive anticounterfeiting strategies, hydrochromic materials exhibit reversible color change in response to moisture or water and have the advantage of being easy to authenticate. However, the security level of current hydrochromic anticounterfeiting materials is not sufficient for practical applications since they only exhibit a single anticounterfeiting function, where the information switches between visible and invisible. To improve the security level and efficiency of hydrochromic anticounterfeiting materials, here we developed a robust dual hydrochromic material via the self-assembly of polyurethane (PU)-polyelectrolytes colloids with which the desired information can not only switch between visible and invisible but also transform from one pattern to another within 3 s without the need of any external instruments. The bio-inspiration, material design and demonstrated hydrochromic properties might have profound implications for using colloidal complexes to make advanced anticounterfeiting materials.

•

Micro-structures are formed by self-assembly of polyurethane-polyelectrolyte colloids

•

Information changes from one pattern to another within 3 s when exposed to water

•

The hydrochromic films are mechanically robust in both dry and wet state

FRET processes of bi-fluorophoric sensor material containing tetraphenylethylene donor and optical-switchable merocyanine acceptor for lead ion (Pb2+) detection in semi-aqueous media

A novel aggregation-induced emission (AIE) structure containing a tetraphenylethene (TPE) unit covalently linked with a merocyanine (MC) unit was synthesized and investigated in semi-aqueous solutions with 90% water fraction. The open-form structure of red-emissive MC unit combined with TPE unit was utilized as a bi-fluorophoric sensor to detect lead(II) ion, which could be transformed from the close-form structure of non-emissive SP unit upon UV exposure. Moreover, the TPE unit as an energy donor with the blue-green photoluminescence (PL) emission at 480 nm was combined with the MC unit as an energy acceptor with the red PL emission at 635 nm. Due to the Förster resonance energy transfer (FRET) processes, the bi-fluorophoric sensor produced more efficient ratiometric PL behavior to induce a stronger red PL emission than that of the mono-fluorophoric MC unit. Hence, the PL sensor responses of the AIE bi-fluorophoric structure toward lead(II) ion could be further amplified via the FRET-OFF processes to turn off red PL emission of the coordinated MC acceptor and to recover blue-green PL emission of the TPE donor. Accordingly, the best LOD value for the AIE sensor detection toward Pb2+ was 0.27 μM. The highest red MC emission with the optimum FRET process of AIE sensor could be utilized in cell viability tests to prove the non-toxic and remarkable bio-marker of AIE sensor to detect lead(II) ion in live cells. The developed FRET-OFF processes with ratiometric PL behavior of the bi-fluorophoric AIE sensor can be utilized for future chemo- and bio-sensor applications.

Mechanically induced single-molecule white-light emission of excited-state intramolecular proton transfer (ESIPT) materials

Described herein is the first example of mechanically induced single-molecule white-light emission based on excited-state intramolecular proton transfer (ESIPT) materials. The mechanism of mechanochromism is clearly disclosed by powder and single crystal X-ray diffraction (XRD) data, infrared spectroscopy, and fluorescence up-conversion measurement, etc. 2-(2'-Hydroxyphenyl)oxazole (6b) with a herringbone packing motif exhibits a predominant keto-form emission, giving off yellowish-green fluorescence. Mechanical grinding transforms the herringbone packing motif into a brickwork packing motif, decreases the intermolecular distances, which results in an enhanced intermolecular charge-transfer interaction, and therefore changes the ESIPT dynamics, leading to an enhanced enol-form emission and white fluorescence. Herringbone-packing 6b is thermodynamically more stable than brickwork-packing 6b. Thus, the latter can convert to the former by solvent fuming or thermal annealing.

Orthogonal Reconstruction of Upconversion and Holographic Images for Anticounterfeiting Based on Energy Transfer

Crosstalk-free reconstruction of multiple images within a single element can greatly boost the image capacity and information security. We herein demonstrate a viable approach by integrating upconversion and holographic images into a single holographic polymer nanocomposite. The holographic image is reconstructed through photopolymerization-induced phase separation under a 460 nm laser and identifiable under room light, while the upconversion image recognizable under a 980 nm laser is photopatterned via spatially photobleaching of the dye embedded in the upconversion nanoparticle (UCNP) shell under 365 nm light. To this end, the lanthanide-doped UCNP in the core/shell/shell nanostructure of NaYF₄:20%Yb³⁺,0.5%Tm³⁺@NaYF₄@SiO₂ is designed, and the dye, fluorescein isothiocyanate (FITC), is fixed in the outermost SiO₂ shell via the amine-isothiocyanate reaction and the subsequent sol-gel reaction. Energy transfer from the core of the UCNP to FITC embedded in the shell is critical to boosting the contrast of the upconversion image, which dials the emission color from blue to yellow-green. It is also found that the upconversion image can be brightened by increasing the UCNP content while the holographic image is weakened when the UCNP content is over 15 wt %. This study paves a new way toward advanced anticounterfeiting.

Fluorescent nanorods based on 9,10-distyrylanthracene (DSA) derivatives for efficient and long-term bioimaging

Fluorescent nanoparticles based on 9,10-distyrylanthracene (DSA) derivatives (4,4'-((1E,1'E)-anthracene-9,10-diylbis(ethene-2,1-diyl))bis(N,N-dimethylaniline) (NDSA) and 4,4'-((1E,1'E)-anthracene-9,10-diylbis(ethene-2,1-diyl))dibenzonitrile (CNDSA)) were prepared using an ultrasound aided nanoprecipitation method. The morphologies of the fluorescent nanoparticles could be controlled by adjusting the external ultrasonication time. NDSA or CNDSA could form spherical nanodots (NDSA NDs, CNDSA NDs) in a THF-H2O mixture with an 80% or 70% water fraction when the ultrasonication time was 30 s. When the ultrasonication time was prolonged to 10 min, NDSA and CNDSA could assemble into nanorods (NDSA NRs, CNDSA NRs). Meanwhile, the sizes of NDSA NRs and CNDSA NRs could be controlled by adjusting the water content in the mixture. As the water fraction was increased from 60% to 80%, the sizes of NDSA and CNDSA nanorods or nanodots reduced from 238.4 nm to 140.3 nm, and 482 nm to 198.4 nm, respectively. When the water fraction was up to 90%, irregular morphologies of NDSA and CNDSA could be observed. The nanoparticles exhibited intense fluorescence emission, good anti-photobleaching properties, as well as excellent stability and biocompatibility. In vitro cell imaging experiments indicated that the nanorods prepared by this simple method had the potential to be used for efficient and noninvasive long-term bioimaging.

Direct Visualization of Chiral Amplification of Chiral Aggregation Induced Emission Molecules in Nematic Liquid Crystals

Chiral amplification in liquid crystals (LCs) is a well-known strategy. However, current knowledge about the underlying mechanism was still lacking; in particular, how it was realized at the nano scale still remained to be revealed. Here, we provide systematical exploration of chiral amplification of chiral aggregation induced emission (AIE) molecules in LCs from direct visualization of their co-assemblies at the nano scale to theoretical calculation of the molecular packing modes on a single molecular level. Using AFM imaging,we directly visualized the co-assembly formed by chiral AIE molecules/LCs at the nano scale: the chiral AIE molecules self-assembled into helical fibers to serve as the helical template for LCs to bind, while the LCs helically bound to the helical fibers to form the co-assembly, giving the morphology of pearled necklaces or thick rods. Theoretical calculation suggested that chiral AIE molecules were packed into left-handed helical fibers with a large volume of empty space between neighboring molecules, which provided the binding cites for LCs. Structural analysis showed that the π-π stacking between aromatic groups from LCs and TPE groups and the σ-π hyperconjugation between LC aromatic groups and cholesterol aliphatic groups play an important role in stabilizing the binding of LCs in the confined space on the surface of the helical assemblies.

Naphthalimide-Based Hydrazone Derivatives: Synthesis, Mechanochromism in the Solid State and Response to Ions in Dilute Solutions

Molecules showing mechanochromic luminescence (MCL) are promising for use in the in the fields of sensing and probes. We report the design and synthesis of new naphthalimide-based hydrazone derivatives, NI-TPE and NI-3BA. Both the luminogens are weakly emissive with ^s Φ_f =0.3 % and 0.5 % respectively when aggregated in amorphous states as strong π-π stacking and intermolecular interaction prevent luminescence. On the contrary, in the crystalline state, single crystal analysis of two derivatives shows that nonradiative decay is reduced or inhibited by molecular stacking modes and intermolecular interactions. Increases of fluorescence emission intensity to ^s Φ_f =5.5 % and 6.0 % upon solvent evaporation are attributed to weak π-π overlapping and hydrogen bonding (N-H ⋅⋅⋅ O, distance 2.99 Å), which are beneficial to the formation of molecules with a loose packing. At the same time, the packing modes that the two derivatives adopt in the crystal lattice are destroyed to result in a low solid-state fluorescence quantum yield and a bathochromic shift of 23-25 nm upon grinding. All these factors cause the two derivatives show an unusual "turn off" MCL phenomenon. The fluorescence emission, its pH reversibility, and selective response to fluoride and acetate ions of up to 91-93 % in dilute solutions were also demonstrated.

Lighting up forensic science by aggregation-induced emission: A review

Forensic science requires a fast, sensitive, and anti-interfering imaging tool for on-site investigation and bio-analysis. The aggregation-induced emission (AIE) phenomenon exhibits remarkable luminescence properties (large Stokes shift, diverse molecular structures, and high photo-stability), which can provide a viable solution for on-site analysis, while at the same time overcoming the problem of aggregation-caused quenching (ACQ). Based on the outstanding performance in chemical analysis and bio-sensing, AIE materials have great prospects in the field of forensic science. Therefore, the application of AIE in forensic science has been summarized for the first time in this article. After a brief introduction to the concept and development of AIE, its applications in the determination of toxic or hazardous substances, based on data on poisoning deaths, has been summarized. Subsequently, besides the bio-imaging function, other applications of AIE in analyzing markers related to forensic genetics, forensic pathology, (focusing on the corpse) and clinical forensics (focusing on the living) have been discussed. In addition, applications of AIE molecules in criminal investigations, including recognition of fingerprints and blood stains, detection of explosives and chemical warfare agents, and anti-counterfeiting have also been presented. It is hoped that this review will light up the future of forensic science by stimulating more research work on the suitability of AIE materials in advancing forensic science.

Flexible π-Conjugated 2,5-Diarylamino-Terephthalates: A New Class of Mechanochromic Luminophores with Tunable Aggregation States

The generation of different thermodynamically (meta)stable states is crucial for the development of smart solid-state luminescent materials. However, the design of luminophores with tunable aggregation states is remaining a grand challenge. Herein, we present a family of mechanochromic luminophores with tunable metastable states, based on the dynamically controllable π-π stacking of the flexible π-conjugated structure of 2,5-diarylamino-terephthalates in the solid state. The experimental data revealed that both the kinetically controlled metastable state and thermodynamic controlled stable state can be generated via tuning the intermolecular interactions such as π-π stacking and hydrogen bonds. As a result, the highly sensitive mechano-stimuli response of these luminophores was successfully achieved.

An Unexpected 4,5-Diphenyl-2,7-naphthyridine Derivative with Aggregation-Induced Emission and Mechanofluorochromic Properties Obtained from a 3,5-Diphenyl-4H-pyran Derivative

For a specific fluorescent molecule, the increase of molecular conformation distortion is beneficial to endow it with aggregation-induced emission (AIE) and mechanofluorochromic (MFC) properties. Herein, 3,5-diphenyl-4H-pyran derivative 5 and 4,5-diphenyl-2,7-naphthidine derivative 7 with highly twisted conformations were synthesized. For compound 5, although the introduction of phenyl rings with large steric hindrance at 3 and 5 positions of the 4H-pyran skeleton realized the transformation from aggregation-induced quenching (ACQ)-active molecule to AIE-active molecule, it only showed a low-contrast MFC activity. Compound 7 was accidentally obtained from compound 5 and n-butylamine via a ring-opening and subsequent intramolecular ring-closing mechanism. Compound 7 was confirmed to have a highly twisted molecular conformation by the crystal structural analysis and exhibited AIE activity originated from the restriction of intramolecular rotation. Furthermore, compound 7 exhibited reversible high-contrast MFC activity. Upon grinding, the change of solid-state fluorescence color from orange to yellow was confirmed to be due to the partial destruction of crystal structure. This work provides new ideas for the design and synthesis of novel AIE-active and MFC-active fluorescent molecules based on ACQ-active parent molecules.

Combining Theory and Experiment to Get Insight into the Amorphous Phase of Luminescent Mechanochromic Copper Iodide Clusters

In the field of stimuli-responsive luminescent materials, mechanochromic compounds exhibiting reversible emission color changes activated by mechanical stimulation present appealing perspectives in sensor applications. The mechanochromic luminescence properties of the molecular cubane copper iodide cluster [Cu₄I₄[PPh₂(C₆H₄-CH₂OH)]₄] (1) are reported in this study. This compound can form upon melting an amorphous phase, giving an unprecedented opportunity to investigate the mechanochromism phenomenon. Because the mechanically induced crystalline-to-amorphous transition is only partial, the completely amorphous phase represents the ultimate state of the mechanically altered phase. Furthermore, the studied compound could form two different crystalline polymorphs, namely, [Cu₄I₄[PPh₂(C₆H₄-CH₂OH)]₄]·C₂H₃N (1·CH₃CN) and [Cu₄I₄[PPh₂(C₆H₄-CH₂OH)]₄]·3C₄H₈O (1·THF), allowing the establishment of straightforward structure-property relationships. Photophysical and structural characterizations of 1 in different states were performed, and the experimental data were supported by theoretical investigations. Solid-state NMR analysis permitted quantification of the amorphous part in the mechanically altered phase. IR and Raman analysis enabled identification of the spectroscopic signatures of each state. Density functional theory calculations led to assignment of both the NMR characteristics and the vibrational bands. Rationalization of the photoluminescence properties was also conducted, with simulation of the phosphorescence spectra allowing an accurate interpretation of the thermochromic luminescence properties of this family of compounds. The combined study of crystalline polymorphism and the amorphous state allowed us to get deeper into the mechanochromism mechanism that implies changes of the [Cu₄I₄] cluster core geometry. Through the combination of multistimuli-responsive properties, copper iodide clusters constitute an appealing class of compounds toward original functional materials.

Photochromism and Fluorescence Switch of Furan-Containing Tetraarylethene Luminogens with Aggregation-Induced Emission for Photocontrolled Interface-Involved Applications

It is extremely challenging to design photocontrolled molecular switches with absorption and fluorescence dual-mode outputs that are suited for a solid surface and interface. Herein, we report a group of furan-containing tetraarylethene derivatives with unique photophysical behavior of aggregation-induced emission (AIE) and distinct photochemical reaction-triggered photochromic behaviors by combining a photoactive furan or benzofuran group and an AIE-active triphenylethene molecule. The introduction of a furyl or benzofuryl group into the AIE luminogen endows the molecules with significant reversible photochromism and solid-state fluorescence. The coloration and decoloration of these molecules can be switched by respective irradiation of UV and visible light in a reversible way, and the photochromic changes are accompanied by a switch-on and switch-off of the solid-state fluorescence. It is revealed that the photocontrolled cyclization and cycloreversion reactions are responsible for the reversible photochromism and fluorescence switching based on experimental data and theoretical analysis. Both the position and conjugation of the introduced photoactive units have significant influence on the color and strength of the photochromism, and the simultaneous occurrence of photoinduced fluorescence change in the solid state is perfectly suited for surface-involved applications. The demonstrations of dual-mode signaling in photoswitchable patterning on a filter paper and anti-counterfeiting of an anti-falsification paper strongly highlight the unique advantage of these photochromic molecules with an aggregation-induced emission characteristic in various practical applications. This work proposes a general strategy to design photochromic molecules with AIE activity by introducing photoactive functionals into an AIEgen and demonstrates incomparable advantage in dual-mode signaling and multifunctional applications of these molecules.