The unique role of fluorine in the design of active ingredients for modern crop protection

Sequential C-F Bond Transformation of the Difluoromethylene Unit in Perfluoroalkyl Groups: A Combination of Fine-Tuned Phenothiazine Photoredox Catalyst and Lewis Acid

A sequential process via photoredox catalysis and Lewis acid mediation for C-F bond transformation of the CF2 unit in perfluoroalkyl groups has been achieved to transform perfluoroalkylarenes into complex fluoroalkylated compounds. A phenothiazine-based photocatalyst promotes the defluoroaminoxylation of perfluoroalkylarenes with (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO) under visible light irradiation, affording the corresponding aminoxylated products. These products undergo a further defluorinative transformation with various organosilicon reagents mediated by AlCl3 to provide highly functionalized perfluoroalkyl alcohols. Our novel phenothiazine catalyst works efficiently in the defluoroaminoxylation. Transient absorption spectroscopy revealed that the catalyst regeneration step is crucial for the photocatalytic aminoxylation.

Synthesis and Evaluation of New Phytotoxic Fluorinated Chalcones as Photosystem II and Seedling Growth Inhibitors

The development of novel phytotoxic compounds has been an important aim of weed control research. In this study, we synthesized fluorinated chalcone derivatives featuring both electron-donating and electron-withdrawing groups. These compounds were evaluated both as inhibitors of the photosystem II (PSII) electron chain as well as inhibitors of the germination and seedling growth of Amaranthus plants. Chlorophyll a (Chl a) fluorescence assay was employed to evaluate their effects on PSII, while germination experiments were conducted to assess their impact on germination and seedling development. The results revealed promising herbicidal activity for (E)-3-(4-bromophenyl)-1-(4-fluorophenyl)prop-2-en-1-one (7 a) and (E)-1-(4-fluorophenyl)-3-phenylprop-2-en-1-one (7 e). Compounds 7 a and 7 e exhibited a reduction in Chl a parameters associated with performance indexes and electron transport per reaction center. This reduction suggests a decrease in PSII activity, attributed to the blockage of electron flow at the quinone pool. Molecular docking analyses of chalcone derivatives with the D1 protein of PSII revealed a stable binding conformation, wherein the carbonyl and fluorine groups interacted with Phe265 and His215 residues, respectively. Additionally, at a concentration of 100 μM, compound 7 e demonstrated pre- and post-emergent herbicidal activity, resulting in a reduction of the seed germination index, radicle and hypocotyl lengths of Amaranthus weeds.

Metallomimetic C-F Activation Catalysis by Simple Phosphines

Delivering metallomimetic reactivity from simple p-block compounds is highly desirable in the search to replace expensive, scarce precious metals by cheap and abundant elements in catalysis. This contribution demonstrates that metallomimetic catalysis, involving facile redox cycling between the P(III) and P(V) oxidation states, is possible using only simple, cheap, and readily available trialkylphosphines without the need to enforce unusual geometries at phosphorus or use external oxidizing/reducing agents. Hydrodefluorination and aminodefluorination of a range of fluoroarenes was realized with good to very good yields under mild conditions. Experimental and computational mechanistic studies show that the phosphines undergo oxidative addition of the fluoroaromatic substrate via a Meisenheimer-like transition state to form a fluorophosphorane. This undergoes a pseudotransmetalation step with a silane, via initial fluoride transfer from P to Si, to give experimentally observed phosphonium ions. Hydride transfer from a hydridosilicate counterion then leads to a hydridophosphorane, which undergoes reductive elimination of the product to reform the phosphine catalyst. This behavior is analogous to many classical transition-metal-catalyzed reactions and so is a rare example of both functional and mechanistically metallomimetic behavior in catalysis by a main-group element system. Crucially, the reagents used are cheap, readily available commercially, and easy to handle, making these reactions a realistic prospect in a wide range of academic and industrial settings.

Iodonium based regioselective double nucleophilic alkene functionalization of a hydrofluoroolefin scaffold

Herein, we report a modular regioselective alkene difunctionalization strategy based on the use of hydrofluoroolefin (HFO) gas as fluorous feedstock material. The transformation of the HFO gas to iodonium salt creates vicinal electrophilic sites readily available for a broad range of nucleophiles.

Electrochemical Fluorination Functionalization of gem-Difluoroalkenes with CsF as a Fluorine Source: Access to Fluoroalkyl Building Blocks

Using easily handled CsF as a fluorine source, an electrochemically metal-free protocol for chemo- and regioselective synthesis of various types of long-chain perfluoroalkyl aromatics with gem-difluoroalkene as a substrate and an alcohol or azole as an additional nucleophile was developed. The eletrochemical transformation could tolerate several functional groups, such as halogens, cyanos, benzyls, and heterocycles, and is amenable to gram-scale. The application of this electrochemical method in radiofluorination was also tested.

Why Nonheme Iron Halogenases Do Not Fluorinate C-H Bonds: A Computational Investigation

Selective halogenation is necessary for a range of fine chemical applications, including the development of therapeutic drugs. While synthetic processes to achieve C-H halogenation require harsh conditions, enzymes such as nonheme iron halogenases carry out some types of C-H halogenation, i.e., chlorination or bromination, with ease, while others, i.e., fluorination, have never been observed in natural or engineered nonheme iron enzymes. Using density functional theory and correlated wave function theory, we investigate the differences in structural and energetic preferences of the smaller fluoride and the larger chloride or bromide intermediates throughout the catalytic cycle. Although we find that the energetics of rate-limiting hydrogen atom transfer are not strongly impacted by fluoride substitution, the higher barriers observed during the radical rebound reaction for fluoride relative to chloride and bromide contribute to the difficulty of C-H fluorination. We also investigate the possibility of isomerization playing a role in differences in reaction selectivity, and our calculations reveal crucial differences in terms of isomer energetics of the key ferryl intermediate between fluoride and chloride/bromide intermediates. While formation of monodentate isomers believed to be involved in selective catalysis is shown for chloride and bromide intermediates, we find that formation of the fluoride monodentate intermediate is not possible in our calculations, which lack additional stabilizing interactions with the greater protein environment. Furthermore, the shorter Fe-F bonds are found to increase isomerization reaction barriers, suggesting that incorporation of residues that form a halogen bond with F and elongate Fe-F bonds could make selective C-H fluorination possible in nonheme iron halogenases. Our work highlights the differences between the fluoride and chloride/bromide intermediates and suggests potential steps toward engineering nonheme iron halogenases to enable selective C-H fluorination.

Synthetic Advantages of Defluorinative C-F Bond Functionalization

Much progress has been made in the development of methods to both create compounds that contain C-F bonds and to functionalize C-F bonds. As such, C-F bonds are becoming common and versatile synthetic functional handles. This review summarizes the advantages of defluorinative functionalization reactions for small molecule synthesis. The coverage is organized by the type of carbon framework the fluorine is attached to for mono- and polyfluorinated motifs. The main challenges, opportunities and advances of defluorinative functionalization are discussed for each class of organofluorine. Most of the text focuses on case studies that illustrate how defluorofunctionalization can improve routes to synthetic targets or how the properties of C-F bonds enable unique mechanisms and reactions. The broader goal is to showcase the opportunities for incorporating and exploiting C-F bonds in the design of synthetic routes, improvement of specific reactions and advent of new methods.

Nickel-Catalyzed Aminofluoroalkylative Cyclization of Styrenes with Ethyl Fluoroacetate and Anilines toward Fluoro-γ-Lactams

A novel method for the nickel-catalyzed multicomponent aminofluoroalkylation/cyclization of styrenes with ethyl fluoroacetate and anilines has been developed. This protocol provides general and efficient access to a diverse range of fluoro-γ-lactams from simple and readily available starting materials. Control experiments prove the involvement of radical intermediates and excluded the presence of 2-fluoro-N-phenylacetamide.

Access to Multifunctionalized Tetrasubstituted Carbon Centers Bearing up to Three Different Heteroatoms via Tandem Geminal Chlorofluorination of 1,2-Dicarbonyl Compounds

The incorporation of noncarbon heteroatoms into organic molecules typically instills characteristic and often valuable functionalities. The copresence of different heteroatoms can further broaden their utility through the synergistic cooperative effects, which may even lead to the discovery of formerly unavailable properties that are not just a simple accumulation of each function. However, despite increasing interest in the controllable installation of heteroatoms, it has been extremely challenging to construct carbon centers having three different heteroatoms in a synthetically useful manner. In this work, our group's tandem geminal chlorofluorination (Cl, F) strategy was applied to rationally designed heteroatom-bearing 1,2-dicarbonyl substrates, including α-keto thioesters (S), α-keto N-acylindoles (N), and α-keto acylsilane (Si), which resulted in the practical production of doubly or triply heterofunctionalized tetrasubstituted carbon centers with excellent site-selectivity.

Applications of Bioisosteres in the Design of Biologically Active Compounds

The design of bioisosteres represents a creative and productive approach to improve a molecule, including by enhancing potency, addressing pharmacokinetic challenges, reducing off-target liabilities, and productively modulating physicochemical properties. Bioisosterism is a principle exploited in the design of bioactive compounds of interest to both medicinal and agricultural chemists, and in this review, we provide a synopsis of applications where this kind of molecular editing has proved to be advantageous in molecule optimization. The examples selected for discussion focus on bioisosteres of carboxylic acids, applications of fluorine and fluorinated motifs in compound design, some applications of the sulfoximine functionality, the design of bioisosteres of drug-H2O complexes, and the design of bioisosteres of the phenyl ring.

Expanding the chemical space of enol silyl ethers: catalytic dicarbofunctionalization enabled by iron catalysis

Enol silyl ethers are versatile, robust, and readily accessible substrates widely used in chemical synthesis. However, the conventional reactivity of these motifs has been limited to classical two electron (2-e) enolate-type chemistry with electrophilic partners or as radical acceptors in one electron (1-e) reactivity leading, in both cases, to exclusive α-monofunctionalization of carbonyls. Herein we describe a mild, fast, and operationally simple one-step protocol that combines readily available fluoroalkyl halides, silyl enol ethers, and, for the first time, hetero(aryl) Grignard reagents to promote selective dicarbofunctionalization of enol silyl ethers. From a broader perspective, this work expands the synthetic utility of enol silyl ethers and establishes bisphosphine-iron catalysis as enabling technology capable of orchestrating selective C-C bond formations with short-lived α-silyloxy radicals with practical implications towards sustainable chemical synthesis.

Uranyl Polyoxotungstate Cluster for Visible-Light-Driven Heterogeneous C-H Selective Fluorination

The selective fluorination of C-H bonds at room temperature using heterogeneous visible-light catalysts is both interesting and challenging. Herein, we present the heterogeneous sandwich-type structure uranyl-polyoxotungstate cluster Na17{Na@[(SbW9O33)2(UO2)6(PO3OH)6]}·46H2O (denoted as U6P6) to regulate the selective fluorination of the C-H bond under visible light and room temperature. This is the first report in which uranyl participates in the fluorination reaction in the form of an insoluble substance. U6P6 is capable of the effective selective fluorination of cycloalkanes and the recyclability of the photocatalyst due to the synergistic effect of multiple uranyl (UO2)2+ and the insolubility of organic reagents of polyoxotungstate. In situ electron paramagnetic resonance spectroscopy captured the generation of cycloalkane radicals during the photoreaction, confirming the mechanism of direct hydrogen atom transfer.

Synthesis of Alkylated Polyfluorobenzenes through Decarboxylative Giese Addition of Aliphatic N-Hydroxyphthalimide Esters with Polyfluorostyrene

Polyfluoroaromatic compounds play crucial roles in medicinal and material science. However, the synthesis of alkylated polyfluoroarenes has been relatively underdeveloped. In this study, we devised a novel decarboxylative coupling reaction between aliphatic N-hydroxyphthalimide esters and polyfluorostyrene, leveraging the photochemical activity of electron donor-acceptor (EDA) complexes. This method offers simple reaction conditions, a broad substrate scope, and excellent functional group tolerance. Furthermore, we have demonstrated the practicality of this protocol through late-stage polyfluoroaryl modification of biologically active molecules using readily available carboxylic acids as starting materials, thus providing an important supplement to the current toolbox for accessing alkylated polyfluoroaryl motifs.

Activation of robust bonds by carbonyl complexes of Mn, Fe and Co

Metal carbonyl complexes possess among the most storied histories of any compound class in organometallic chemistry. Nonetheless, these old dogs continue to be taught new tricks. In this Feature, we review the historic discoveries and recent advances in cleaving robust bonds (e.g., C-H, C-O, C-F) using carbonyl complexes of three metals: Mn, Fe, and Co. The use of Mn, Fe, and Co carbonyl catalysts in controlling selectivity during hydrofunctionalization reactions is also discussed. The chemistry of these earth-abundant metals in the field of robust bond functionalization is particularly relevant in the context of sustainability. We expect that an up-to-date perspective on these seemingly simple organometallic species will emphasize the wellspring of reactivity that continues to be available for discovery.

The wide presence of fluorinated compounds in common chemical products and the environment: a review

The C-F bonds, due to their many unique features, have been incorporated into numerous compounds in countless products and applications. These fluorinated compounds eventually are disposed of and released into the environment through different pathways. In this review, we analyzed the occurrence of these fluorinated compounds in seven types of products (i.e., refrigerants/propellants, aqueous film-forming foam, cosmetics, food packaging, agrochemicals, pharmaceuticals, coating materials) and discussed their fate in the environment. This is followed by describing the quantity of fluorinated compounds from each source based on available data. Total on- and off-site disposal or other releases of 536 fluorinated compounds in 2021 were analyzed using the data sourced from the U.S. EPA Toxics Release Inventory (TRI). Among the chemicals examined, chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons (HCFCs) were the primary contributors in terms of total mass. Upon examining the seven sources of fluorinated compounds, it became evident that additional contributors are also responsible for the presence of organofluorine compounds in the environment. Although various toxic degradation products of fluorinated compounds could form in the environment, trifluoroacetic acid (TFA) was specifically highlighted in this review given the fact that it is a common dead-end degradation product of > 1 million chemicals. This paper ended with a discussion of several questions raised from this study. The path forward was elaborated as well for the purpose of protecting the environment and human health.

A Strategic Synthesis of Fluoroethers via Ring-Opening Fluorinative Beckmann Fragmentation

An SN1-type fluorination method for monofluoroethers is developed. The key to this reaction is fluorinative C-C bond cleavage that is driven by oxygen-assisted Beckmann fragmentation. To enable this transformation, cyclic α-aryloxyoximes derived from 3-coumaranone and 1-indanones were investigated as substrates, using N,N-diethylaminosulfur trifluoride (DAST) as a dual-role reagent of an oxime activator and fluoride donor. This method features the synthesis of an underdeveloped chemical motif with simple and mild operating conditions.

Hypervalent Fluoro-iodane-Triggered Semipinacol Rearrangements: Synthesis of α-Fluoro Ketones

Hypervalent fluoro-λ3-iodanes have emerged as versatile reagents that provide unusual fluorination selectivities under mild reaction conditions. Here, we report on adding a semipinacol rearrangement, fluorination, and aryl migration cascade reaction of styrene derivatives. Thus, various cyclopentanones became accessible in up to 96% yield, all bearing tertiary C,F-carbon centers adjacent to the ketone group. Such fluorinated structural motifs are difficult to build with previously established methods. Preliminary experiments on enantioselective processes validated that asymmetric transformations are likewise feasible.

Fluoroalkylations and Fluoroalkenylations with Iodonium Salts

Synthesis and applications of fluoroalkyl and fluoroalkenyliodonium salts are summarized in this account article, focusing preferably to the reagents designed in our laboratory in the last decade. Among these reagents trifluoroethyl(aryl)iodonium salts have been used most frequently to build carbon-carbon and carbon-heteroatom bonds in simple nucleophilic substitutions and through transition metal catalyzed coupling reactions. Iodonium salts equipped with unsaturated fluorinated function showed diverse reactivity due to their electron deficient character, and these molecular motifs enable cycloadditions and nucleophilic additions to prepare fluorinated carbo- and heterocyclic molecules. Beyond the overview of existing transformations, with the presented collection, we aim to inspire future developments of iodonium reagents and their application in organic synthesis.

Visible Light-Induced Metal-Free Fluoroalkylations

Fluoroalkylation is a crucial synthetic process that enables the modification of molecules with fluoroalkyl groups, which can enhance the properties of compounds and have potential applications in medicine and materials science. The utilization of visible light-induced, metal-free methods is of particular importance as it provides an environmentally friendly alternative to traditional methods and eliminates the potential risks associated with metal-catalyst toxicity. This Account describes our studies on visible light-induced, metal-free fluoroalkylation processes, which include the use of organic photocatalysts or EDA complexes. We have utilized organophotocatalysts such as Nile red, tri(9-anthryl)borane, and an indole-based tetracyclic complex, as well as catalyst-free EDA chemistry through photoactive halogen bond formation or an unconventional transient ternary complex formation with nucleophilic fluoroalkyl source. A variety of π-systems including arenes/heteroarenes, alkenes, and alkynes have been successfully fluoroalkylated under the developed reaction conditions.

Practical Synthesis of Terminal Vinyl Fluorides

The synthesis of di- and trisubstituted vinyl fluorides with high isomeric purity remains a challenge for organic synthesis. While many methods exist to access these compounds, the separation of the desired isomer from the minor isomer and/or starting materials often is difficult. Herein, we report a practical method to access di- and trisubstituted vinyl fluorides via a selective Horner-Wadsworth-Emmons olefination/hydrolysis, which provides crystalline 2-fluoroacrylic acids in high (>98%) E-isomeric purity. A subsequent silver-catalyzed stereoretentive decarboxylation provides the title substances with high isomeric purity and without the need for tedious chromatography to remove the minor isomer. The process was amenable to a variety of aldehydes and ketones and provided a diverse array of di- and trisubstituted vinyl fluorides. The sequence was applied to the synthesis of antibacterial and anti-inflammatory compounds.

Fluorinated covalent-organic polymers as stationary phase for analysis of organic fluorides by open-tubular capillary electrochromatography

Fluorinated porous materials, which can provide specific fluorine-fluorine interaction, hold great promise for fluoride analysis. Here, a novel fluorinated covalent-organic polymer was prepared by using 2,4,6-tris(4-aminophenyl)-1,3,5-triazine and 2,3,5,6-tetrafluorotelephtal aldehyde as the precursors and introduced as stationary phase for open-tubular capillary electrochromatography. The as-synthesized fluorinated covalent-organic polymer and the modified capillary column were characterized by infrared spectroscopy, scanning electron microscopy, and energy dispersive X-ray spectrometry. Based on strong hydrophobic interaction and fluorine-fluorine interaction provided by fluorinated covalent-organic polymer coating layer, the modified column showed powerful separation selectivity toward hydrophobic compounds, organic fluorides, and fluorinated pesticides. Additionally, the fluorinated covalent-organic polymer with good porosity and regular shape was uniformly and tightly coated on the capillary inner wall. The obtained highest column efficiency could reach up to 1.2 × 105 plates⋅m-1 for fluorophenol. The loading capacity of the modified column can reach 141 pmol for trifluorotoluene. Besides, the relative standard deviations of retention times for intraday run (n = 5), interday run (n = 3), and between columns (n = 3) were all less than 2.55%. Significantly, this novel fluorinated material-based stationary phase shows great application potential in fluorides analysis.

Fluorocarbonylation via palladium/phosphine synergistic catalysis

Despite the growing importance of fluorinated organic compounds in pharmaceuticals, agrochemicals, and materials science, the introduction of fluorine into organic molecules is still a challenge, and no catalytic fluorocarbonylation of aryl/alkyl boron compounds has been reported to date. Herein, we present the development of palladium and phosphine synergistic redox catalysis of fluorocarbonylation of potassium aryl/alkyl trifluoroborate. Trifluoromethyl arylsulfonate (TFMS), which was used as a trifluoromethoxylation reagent, an easily handled and bench-scale reagent, has been employed as an efficient source of COF₂. The reaction operates under mild conditions with good to excellent yields and tolerates diverse complex scaffolds, which allows efficient late-stage fluorocarbonylation of marked small-molecule drugs. Mechanistically, the key intermediates of labile Brettphos-Pd(II)-OCF₃ complex and difluoro-Brettphos were synthesized and spectroscopically characterized, including X-ray crystallography. A detailed reaction mechanism involving the synergistic redox catalytic cycles Pd(II)/(0) and P(III)/(V) was proposed, and multifunction of phosphine ligand was identified based on ¹⁹F NMR, isotope tracing, synthetic, and computational studies.

Direct Fluoroacylation of Indole with Perfluoroalkyl Iodides

Functionalization of perfluoroalkyl compounds has shown huge potential in synthetic chemistry and drug development. Herein, we report a one-pot tandem perfluoroalkylation-defluorination reaction of indole, perfluoroalkyl iodide, and water in the presence of Na₂S₂O₄. A wide array of indole derivatives were efficiently accessed with good yields under mild reaction conditions. The reaction is believed to undergo perfluoroalkylation and follow the defluorination hydrolysis pathway. This study represents an alternative approach for defluorination functionalization.

Visible-Light Photoredox-Catalyzed Three-Component Reaction of Carbazoles with Alkenes and S-(Difluoromethyl)sulfonium Salt: A Practical Approach to Access Difluoroalkyl-Functionalized Carbazoles

A mild and elegant multicomponent protocol for construction of CF₂H-containing carbazoles was accomplished by visible-light photoredox catalysis with formation of two new C-C bonds in a single step to deliver a wide variety of structurally diverse difluoroalkylated carbazoles in moderate to good yields, featuring mild reaction conditions, synthetic simplicity, broad substrates, and good functional group tolerance.

Insecticidal and Repellent Properties of Rapid-Acting Fluorine-Containing Compounds against Aedes aegypti Mosquitoes

The development of safe and potent insecticides remains an integral part of a multifaceted strategy to effectively control human-disease-transmitting insect vectors. Incorporating fluorine can dramatically alter the physiochemical properties and bioavailability of insecticides. For example, 1,1,1-trichloro-2,2-bis(4-fluorophenyl)ethane (DFDT)─a difluoro congener of trichloro-2,2-bis(4-chlorophenyl)ethane (DDT)─was demonstrated previously to be 10-fold less toxic to mosquitoes than DDT in terms of LD50 values, but it exhibited a 4-fold faster knockdown. Described herein is the discovery of fluorine-containing 1-aryl-2,2,2-trichloro-ethan-1-ols (FTEs, for fluorophenyl-trichloromethyl-ethanols). FTEs, particularly per-fluorophenyl-trichloromethyl-ethanol (PFTE), exhibited rapid knockdown not only against Drosophila melanogaster but also against susceptible and resistant Aedes aegypti mosquitoes, major vectors of Dengue, Zika, yellow fever, and Chikungunya viruses. The R enantiomer of any chiral FTE, synthesized enantioselectively, exhibited faster knockdown than its corresponding S enantiomer. PFTE does not prolong the opening of mosquito sodium channels that are characteristic of the action of DDT and pyrethroid insecticides. In addition, pyrethroid/DDT-resistant Ae. aegypti strains having enhanced P450-mediated detoxification and/or carrying sodium channel mutations that confer knockdown resistance were not cross-resistant to PFTE. These results indicate a mechanism of PFTE insecticidal action distinct from that of pyrethroids or DDT. Furthermore, PFTE elicited spatial repellency at concentrations as low as 10 ppm in a hand-in-cage assay. PFTE and MFTE were found to possess low mammalian toxicity. These results suggest the substantial potential of FTEs as a new class of compounds for controlling insect vectors, including pyrethroid/DDT-resistant mosquitoes. Further investigations of FTE insecticidal and repellency mechanisms could provide important insights into how incorporation of fluorine influences the rapid lethality and mosquito sensing.

Vibronic and Cationic Features of 2-Fluorobenzonitrile and 3-Fluorobenzonitrile Studied by REMPI and MATI Spectroscopy and Franck-Condon Simulations

Fluorinated organic compounds have superior physicochemical properties than general organic compounds due to the strong C-F single bond; they are widely used in medicine, biology, pesticides, and materials science. In order to gain a deeper understanding of the physicochemical properties of fluorinated organic compounds, fluorinated aromatic compounds have been investigated by various spectroscopic techniques. 2-fluorobenzonitrile and 3-fluorobenzonitrile are important fine chemical intermediates and their excited state S₁ and cationic ground state D₀ vibrational features remain unknown. In this paper, we used two-color resonance two photon ionization (2-color REMPI) and mass analyzed threshold ionization (MATI) spectroscopy to study S₁ and D₀ state vibrational features of 2-fluorobenzonitrile and 3-fluorobenzonitrile. The precise excitation energy (band origin) and adiabatic ionization energy were determined to be 36,028 ± 2 cm^-1 and 78,650 ± 5 cm^-1 for 2-fluorobenzonitrile and 35,989 ± 2 cm^-1 and 78,873 ± 5 cm^-1 for 3-fluorobenzonitrile, respectively. The density functional theory (DFT) at the levels of RB3LYP/aug-cc-pvtz, TD-B3LYP/aug-cc-pvtz, and UB3LYP/aug-cc-pvtz were used to calculate the stable structures and vibrational frequencies for the ground state S₀, excited state S₁, and cationic ground state D₀, respectively. Franck-Condon spectral simulations for transitions of S₁ ← S₀ and D₀ ← S₁ were performed based on the above DFT calculations. The theoretical and experimental results were in good agreement. The observed vibrational features in S₁ and D₀ states were assigned according to the simulated spectra and the comparison with structurally similar molecules. Several experimental findings and molecular features were discussed in detail.

A straightforward access to trifluoromethylated natural products through late-stage functionalization

Covering: 2011 to 2021Trifluoromethyl (CF3)-modified natural products have attracted increasing interest due to their magical effect in binding affinity and/or drug metabolism and pharmacokinetic properties. However, the chemo and regioselective construction of natural products (NPs) bearing a CF3 group still remains a long-standing challenge due to the complex chemical scaffolds and diverse reactive sites of NPs. In recent years, the development of late-stage functionalization strategies, including metal catalysis, organocatalysis, light-driven reactions, and electrochemical synthesis, has paved the way for direct trifluoromethylation process. In this review, we summarize the applications of these strategies in the late-stage trifluoromethylation of natural products in the past ten years with particular emphasis on the reaction model of each method. We also discuss the challenges, limitations, and future prospects of this approach.

Visible-light photoredox-catalyzed radical aryldifluoromethylation of N-arylacrylamides with S-(difluoromethyl)sulfonium salt

A facile and highly efficient visible-light photoredox-catalyzed protocol for aryldifluoromethylation of acrylamides was developed using S-(difluoromethyl)sulfonium salt as the difluoromethyl source. With this method, pharmaceutically interesting CF₂H-containing oxindoles were readily accessed from N-arylacrylamides, and this method featured mild reaction conditions, a broad scope of substrates, good tolerance of functional groups, and good to excellent yields. Control experiments revealed that this protocol proceeded through a difluoromethylation/cyclization cascade process.

Studying Regioisomer Formation in the Pd-Catalyzed Fluorination of Cyclic Vinyl Triflates: Evidence for in situ Ligand Modification

Pd-catalyzed nucleophilic fluorination reactions are important methods for the synthesis of fluoroarenes and fluoroalkenes. However, these reactions can generate a mixture of regioisomeric products that are often difficult to separate. While investigating the Pd-catalyzed fluorination of cyclic vinyl triflates, we observed that the addition of a substoichiometric quantity of TESCF3 significantly improved the regioselectivity of the reaction. Herein, we report a combined experimental and computational study on the mechanism of this transformation focusing on the role of TESCF3 . The poor regioselectivity of the reaction in the absence of additives results from the formation of LPd-cyclohexyne complexes (L=biaryl monophosphine ligand). When TESCF3 is added to the reaction mixture, the generation of the Pd-cyclohexyne complexes is diminished by an unexpected pathway involving the dearomatization of the ligand by nucleophilic attack from a trifluoromethyl anion (CF3 - ).

Cobalt-catalysed nucleophilic fluorination in organic carbonates

The novel P-N ligand 1-((diphenylphosphaneyl)methyl)-1H-benzo-1,2,3-triazole (1), based on a benzotriazole scaffold, has been prepared. The reaction of 1 with [CoCp*(CH₃CN)₃][BF₄]₂ and [CoCp*(I)₂]₂ (Cp* = pentamethylcyclopentadienyl) affords the chelate complexes [CoCp*(CH₃CN)(P-N)][BF₄]₂ (2) and [CoCp*(I)(P-N)]I (3), respectively. Complexes 2 and 3 were studied as catalysts in the fluorination of aromatic and aliphatic acyl chlorides in CH₂Cl₂, with 3 showing notably higher activities than 2. Subsequently, organic carbonates (dimethyl carbonate and propylene carbonate) were also employed as solvents, which led to shorter reaction times and to the broadening of the substrate scope to a variety of aliphatic halides. Comparative studies between 3 and the analogous complex [CoCp*(I)₂(PMePh₂)], which features a monodentate phosphane ligand, showed that higher yields were obtained in the case of the former. DFT calculations and experimental studies were performed in order to shed light on the reaction mechanism, which entails the formation of a cobalt fluoride species that reacts via nucleophilic attack with the substrate to afford the corresponding fluorinated compounds.

Synthesis of novel glycerol-fluorinated triazole derivatives and evaluation of their phytotoxic and cytogenotoxic activities

The control of weeds in agriculture is mainly conducted with the use of synthetic herbicides. However, environmental and human health concerns and increased resistance of weeds to existing herbicides have increased the pressure on researchers to find new active ingredients for weed control which present low toxicity to non-target organisms, are environmentally safe, and can be applied at low concentrations. It is herein described the synthesis of glycerol-fluorinated triazole derivatives and evaluation of their phytotoxic and cytogenotoxic activities. Starting from glycerol, ten fluorinated triazole derivatives were prepared in four steps. The assessment of them on Lactuca sativa revealed that they present effects on phytotoxic and cytogenotoxic parameters with different degrees of efficiency. The compounds 4a, 4b, 4d, 4e, 4i, and 4j have pre-emergent inhibition behavior, while all the investigated compounds showed post emergent effect. Mechanism of action as clastogenic, aneugenic, and epigenetic were observed in the lettuce root meristematic cells, with alterations as stick chromosome, bridge, delay, c-metaphase, and loss. It is believed that glycerol-fluorinated triazole derivatives possess a scaffold that can be explored towards the development of new chemicals for the control of weed species.

Electrochemical trifluoromethylation of 2-isocyanobiaryls using CF3SO2Na: synthesis of 6-(trifluoromethyl)phenanthridines

An efficient trifluoromethylation of 2-isocyanobiaryls was developed through the constant current electrolysis, employing sodium trifluoromethanesulfinate (CF₃SO₂Na) as the trifluoromethyl source. The method enabled the syntheses of a series of 6-(trifluoromethyl)phenanthridine derivatives in moderate to high yields under metal- and oxidant-free conditions. A gram-scale synthesis highlights the synthetic versatility of the reported protocol.

P-Stereogenic Ir-MaxPHOX: A Step toward Privileged Catalysts for Asymmetric Hydrogenation of Nonchelating Olefins

The Ir-MaxPHOX-type catalysts demonstrated high catalytic performance in the hydrogenation of a wide range of nonchelating olefins with different geometries, substitution patterns, and degrees of functionalization. These air-stable and readily available catalysts have been successfully applied in the asymmetric hydrogenation of di-, tri-, and tetrasubstituted olefins (ee's up to 99%). The combination of theoretical calculations and deuterium labeling experiments led to the uncovering of the factors responsible for the enantioselectivity observed in the reaction, allowing the rationalization of the most suitable substrates for these Ir-catalysts.

Direct Deprotonative Functionalization of α,α-Difluoromethyl Ketones using a Catalytic Organosuperbase

The deprotonative functionalization of α,α-difluoromethyl ketones is described herein. Using a catalytic organosuperbase and a silane additive, the corresponding difluoroenolate could be generated and trapped with aldehydes to deliver various α,α-difluoro-β-hydroxy ketones in high yields. This new strategy tolerates numerous functional groups and represents the access to the difluoroenolate by direct deprotonation of the difluoromethyl unit. The diastereoselective version of the reaction was also investigated with d.r. up to 93 : 7. Several transformations were performed to demonstrate the synthetic potential of these α,α-difluoro-β-hydroxy ketones. In addition, this method has been extended to the use of other electrophiles such as imines and chalcogen derivatives, and a difluoromethyl sulfoxide as nucleophile, thus leading to a diversity of difluoromethylene compounds.

Amide-Ligand-Promoted Silver-Catalyzed C-H Fluorination via Radical/Polar Crossover

We describe an efficient method for benzylic C-H fluorination via sequential hydrogen-atom transfer (HAT) and oxidative radical-polar crossover utilizing the Ag(I)/Selectfluor system. Amide ligands, such as benzamide and sulfonamide, substantially facilitate the processes leading to a carbocation intermediate, which subsequently reacts with nucleophilic fluorinating reagent to form a C-F bond. This protocol is applicable to the fluorination of all 1°, 2°, and 3° C-H bonds as well as to late-stage C-H fluorination of bioactive molecules.

Late-Stage Modification of Drugs via Alkene Formal Insertion into Benzylic C-F Bond

C-F insertion of carbon-atom units is underdeveloped although it poses significant potential applications in both drug discovery and development. Herein, we report a photocatalytic protocol for late-stage modification of trifluoromethyl aromatic drugs involving formal insertion of abundant alkene feedstocks into a benzylic C-F bond selectively. This redox-neutral transformation features mild conditions and extraordinary functional group tolerance. Preliminary studies are consistent with this transformation involving a radical-polar crossover pathway. Additionally, it offers an alternative strategy for difunctionalization of alkenes via quenching of the carbocation intermediate with nucleophiles other than external fluoride.

Visible-light-induced selective defluoroalkylations of polyfluoroarenes with alcohols

To provide α-polyfluoroarylalcohols, a novel protocol for the selective defluoroalkylation of polyfluoroarenes with easily accessible alcohols was reported via the cooperation of photoredox and hydrogen atom transfer (HAT) strategies with the assistance of Lewis acids under visible light irradiation. The protocol featured broad scope, excellent regioselectivity for both C-H and C-F bond cleavages, and mild conditions. Mechanistic studies suggested that the reaction occurred through Lewis acid-promoted HAT to provide an alkyl radical and sequential addition to polyfluoroarenes. Impressively, the regioselectivity for C-F cleavage was verified with the Fukui function. The feasibility and application of this protocol on fluoroarene synthesis were well illustrated by gram-scale synthesis under both batch and flow conditions, late-stage decoration of bioactive compounds, and further transformations of the fluoroarylalcohols.

Catalytic and Chemodivergent Synthesis of 1-Substituted 9H-Pyrrolo[1,2-a]indoles via Annulation of β-CF3 Enones with 3-Substituted Indoles

Chemodivergent reactions are more advantageous in organic synthesis that yield diversely functionalized scaffolds from common starting materials. Herein, we report an efficient metal-free chemodivergent protocol for the synthesis of 1-substituted 9H-pyrrolo[1,2-a]indole derivatives in the presence of catalytic amounts of Lewis acid/Brønsted acid conditions using 3-substituted indoles and β-trifluoromethyl-α,β-unsaturated ketones. Fine-tuning of the catalyst and solvent system in the reaction conditions deliver the trifluoromethyl, trifluoroethylcarboxylate, or carboxylic acid substituents on the C1-position of 9H-pyrrolo[1,2-a]indole derivatives in situ. It is postulated that the solvent and LA/BA catalyst interaction was found to be crucial for the catalytic C-F activation in these transformations.

A Polyfluoroalkyl-Containing Non-fullerene Acceptor Enables Self-Stratification in Organic Solar Cells

The elaborate control of the vertical phase distribution within an active layer is critical to ensuring the high performance of organic solar cells (OSCs), but is challenging. Herein, a self-stratification active layer is realised by adding a novel polyfluoroalkyl-containing non-fullerene small-molecule acceptor (NFSMA), EH-C₈ F₁₇ , as the guest into PM6:BTP-eC9 blend. A favourable vertical morphology was obtained with an upper acceptor-enriched thin layer and a lower undisturbed bulk heterojunction layer. Consequently, a power conversion efficiency of 18.03 % was achieved, higher than the efficiency of 17.40 % for the device without EH-C₈ F₁₇ . Additionally, benefiting from the improved charge transport and collection realised by this self-stratification strategy, the OSC with a thickness of 350 nm had an impressive PCE of 16.89 %. The results of the study indicate that polyfluoroalkyl-containing NFSMA-assisted self-stratification within the active layer is effective for realising an ideal morphology for high-performance OSCs.

A Photoredox/Sulfide Dual Catalysis System That Uses Sulfide Radical Cations to Promote Alkene Chlorotrifluoromethylation

Sulfides and their derivatives are among the most important class of reagent in synthetic chemistry. Despite the importance of such compounds, the use of sulfide radical cations in synthetic chemistry is underdeveloped. To address this issue, herein, we describe alkene chlorotrifluoromethylation reactions promoted by photoredox/sulfide dual catalysis systems, which involves sulfide radical cations generated through the oxidation of sulfides by a photoredox catalyst. The high functional group tolerance of this chemistry was demonstrated using natural products and drug molecules as substrate alkenes.

Facile Entry to Pharmaceutically Important 3-Difluoromethyl-quinoxalin-2-ones Enabled by Visible-Light-Driven Difluoromethylation of Quinoxalin-2-ones

CF₂H moiety has a significant potential utility in drug design and discovery, and the incorporation of CF₂H into biologically active molecules represents an important and efficient strategy for seeking lead compounds and drug candidates. On the other hand, quinoxalin-2-one is of great interest to pharmaceutical chemists as a common skeleton frequently occurring in plenty of natural products and bioactive compounds. Herein, we reported a practical and efficient protocol for the synthesis of 3-CF₂H-quinoxalin-2-ones. Thus, in the presence of 3 mol% of photocatalyst and S-(difluoromethyl)sulfonium salt as difluoromethyl radical sources, a wide range of quinoxalin-2-ones readily underwent a visible-light redox-catalyzed difluoromethylation reaction, to deliver structurally diverse 3-difluoromethyl-quinoxalin-2-ones. We believe that this would facilitate increasing chances and possibilities for seeking potential lead compounds and drug candidates and further boost the development of fluorine-containing pharmaceuticals.

Synthesis and Reactions of 3-Halogenated 2-CF3-Indoles

Halogenation of 2-trifluoromethylindole afforded 3-chloro-, 3-bromo- and 3-iodo derivatives in up to 98% yield. Methyl-, benzyl- and tosyl-groups can be installed at the nitrogen atom of prepared indoles in high yields by base catalyzed reaction with the corresponding alkylating (sulfonylating) reagents. A high synthetic utility of the prepared haloindoles in the reaction with various nucleophilies was shown. The reaction with 4-methylthiophenol and copper cyanide afforded the corresponding sulfides and nitriles in high yield. Palladium catalyzed cross-coupling with phenyl boronic acid and phenylacetylene gave the corresponding 3-phenyl-2-CF₃-indoles and acetylenic derivatives in 72-98% yield.

Fluorine-Modulated Electronic Structure and Atomic Bonding of the Titanium Surface

The fluorine-adsorption-induced local bond relaxation and valence-energy-state evolution of the Ti(0001) surface were examined through density functional theory calculations. The predicted bond-band-barrier (3 B) correlation notation framework for the interaction of the fluorine adsorbate with Ti atoms formed a tetrahedral structure through the creation of four valence density-of-state features, namely bonding electron pairs, nonbonding lone pairs, holes, and antibonding dipoles. The bonding states resulted in the passivation of metal Ti surfaces, the formation of Ti^p dipoles and Ti^+/p H-like bonds modulated the work function of the Ti(0001) surface, and the conversion of metallic Ti to semiconducting titanium fluoride by the holes. The findings of this study confirm the universal applicability of the 3 B correlation notation in the dynamics of fluorine chemisorption and the associated valence electrons involved in fluorination.

Acid-Switchable Synthesis of Trifluoromethylated Triazoles and Isoxazoles via Reaction of CF3-Ynones with NaN3: DFT Study of the Reaction Mechanism

A detailed study of the reaction of CF₃-ynones with NaN₃ was performed. It was found that the reaction permits the selective synthesis of either 4-trifluoroacetyltriazoles or 5-CF₃-isoxazoles. The chemoselectivity of the reaction was switchable via acid catalysis. The reaction of CF₃-ynones with NaN₃ in EtOH produced high yields of 4-trifluoroacetyltriazoles. In contrast, the formation of 5-CF₃-isoxazoles was observed under catalysis by acids. This acid-switchable procedure can be performed at sub-gram scale. The possible reaction mechanism was supported by DFT calculations. The synthetic utility of the prepared 4-trifluoroacetyltriazoles was demonstrated.

Metal-free visible-light-induced hydroxy-perfluoroalkylation of conjugated olefins using enamine catalyst

We developed a simple and sustainable method for the hydroxy-perfluoroalkylation of electron-deficient conjugated olefins and styrenes. In this protcol, in situ generated enamine forms electron-donor-accepter (EDA) complexes with perfluoroalkyl iodide, and reaction proceed with visible-light irradiation. Tertiary amine also interacts with perfluoroalkyl iodide via halogen-bonding, promoting the perfluoroalkyl radical generation. This reaction does not require any transition-metal or photoredox catalyst, and gaseous oxygen is used as the green hydroxy source. Moreover, various commercially available substrates and perfluoroalkyl iodides were tolerated, affording the desired hydroxy-perfluoroalkylated products in good to moderate yields (>50 examples, up to 90%).

Nickel-catalyzed regio- and enantio-selective Markovnikov hydromonofluoroalkylation of 1,3-dienes

A highly enantio- and regio-selective Markovnikov hydromonofluoro(methyl)alkylation of 1,3-dienes was developed using redox-neutral nickel catalysis. It provided a facile strategy to construct diverse monofluoromethyl- or monofluoroalkyl-containing chiral allylic molecules. Notably, this represents the first catalytic asymmetric Markovnikov hydrofluoroalkylation of olefins. The practicability of this methodology is further highlighted by its broad substrate scope, mild base-free conditions, excellent enantio- and regio-selectivity, and diversified product elaborations to access useful fluorinated building blocks.

Self-Sustaining Fluorination of Active Methylene Compounds and High-Yielding Fluorination of Highly Basic Aryl and Alkenyl Lithium Species with a Sterically Hindered N-Fluorosulfonamide Reagent

Fluorination of carbanions is pivotal for the synthesis of fluorinated compounds, but the current N-F fluorinating agents have significant drawbacks due to many reactive locations that surround the reactive N-F site. By developing a sterically hindered N-fluorosulfonamide reagent, namely N-fluoro-N-(tert-butyl)-tert-butanesulfonamide (NFBB), we discovered a conceptually novel base-catalyzed, self-sustaining fluorination of active methylene compounds and achieved the high-yielding fluorination of the hitherto difficult highly basic (hetero)aryl and alkenyl lithium species. In the former, the mild and high yield fluorination of active methylene compounds exhibited wide functional group tolerance and its novel catalytic fluorination-deprotonation cycle mechanism was demonstrated by deuterium-tracing experiments. In the latter, NFBB reacted with a variety of highly basic (hetero)aryl and alkenyl lithium species to provide the desired fluoro (hetero)arenes and alkenes in unprecedented high or quantitative yields.