Carbon Dioxide Capture Adsorbents: Chemistry and Methods

An ETS-NOCV-based computational strategies for the characterization of concerted transition states involving CO2

Due to the presence of both a slightly acidic carbon and a slightly basic oxygen, carbon dioxide is often involved in concerted transition states (TSs) with two (or more) different molecular events interlaced in the same step. The possibility of isolating and quantitatively evaluating each molecular event would be important to characterize and understand the reaction mechanism in depth. This could be done, in principle, by measuring the relevant distances in the optimized TS, but often distances are not accurate enough, especially in the presence of many simultaneous processes. Here, we have applied the Extended Transition State-Natural Orbital for Chemical Valence-method (ETS-NOCV), also in combination with the Activation Strain Model (ASM) and Energy Decomposition Analysis (EDA), to separate and quantify these molecular events at the TS of both organometallic and organic reactions. For the former, we chose the decomposition of formic acid to CO2 by an iridium catalyst, and for the latter, a CO2 -mediated transamidation and its chemical variations (hydro- and aminolysis of an ester) as case studies. We demonstrate that the one-to-one mapping between the "molecular events" and the ETS-NOCV components is maintained along the entire lowest energy path connecting reactants and products around the TS, thus enabling a detailed picture on the relative importance of each interacting component. The methodology proposed here provides valuable insights into the effect of different chemical substituents on the reaction mechanism and promises to be generally applicable for any concerted TSs.

Sensitivity Analysis and Cost Estimation of a CO2 Capture Plant in Aspen HYSYS

A standard CO2 capture process is implemented in Aspen HYSYS, simulated, and evaluated based on available data from Fortum’s waste burning facility at Klemetsrud in Norway. Since amine-based CO2 removal has high costs, the main aim is cost-optimizing. A simplified carbon-capture unit with a 20-m absorber packing height, 90% CO2 removal efficiency, and a minimum approach temperature for the lean/rich amine heat exchanger (ΔTmin) of 10 °C was considered the base case simulation model. A sensitivity analysis was performed to optimize these parameters. For the base case study, CO2 captured cost was calculated as 37.5 EUR/t. When the sensitivity analysis changes the size, the Power Law method adjusts the equipment cost. A comparison of the Enhanced Detailed Factor (EDF) and the Power Law approach was performed for all simulations to evaluate the uncertainties in the findings from the Power Law method. The optimums calculated for ΔTmin and CO2 capture rate were 15 °C and 87% for both methods, with CO2 removal costs of 37 EUR/t CO2 and 36.7 EUR/t CO2, respectively. With 19 m of packing height to absorber, the minimum CO2 capture cost was calculated as 37.3 EUR/t and 37.1 EUR/t for the EDF and Power Law methods, respectively. Since there was a difference between the Power Law method and the EDF method, a size factor exponent derivation was performed. The derivation resulted in the following exponents: for the lean heat exchanger 0.74, for the lean/rich heat exchanger 1.03, for the condenser 0.68, for the reboiler 0.92, for the pump 0.88, and for the fan 0.23.

Critical assessment of the performance of next-generation carbon-based adsorbents for CO2 capture focused on their structural properties

Carbon dioxide emissions and their sharply rising effect on global warming have encouraged research efforts to develop efficient technologies and materials for CO₂ capture. Post-combustion CO₂ capture by adsorption using solid materials is considered an attractive technology to achieve this goal. Templated materials, such as Zeolite Templated-Carbons and MOF-Derived Carbons, are considered as the next-generation carbon adsorbent materials, owing to their outstanding textural properties (high surface areas of ca. 4000 m² g^-1 and micropore volumes of ca. 1.7 cm³ g^-1) and their versatility for surface functionalization. These materials have demonstrated remarkable CO₂ adsorption capacities and CO₂/N₂ selectivities up to ca. 5 mmol g^-1 and 100, respectively, at 298 K and 1 bar, and low isosteric heat of adsorption at zero coverage of ca. 12 kJ mol^-1. Herein, a review of the advances in preparation of ZTCs and MDCs for CO₂ capture is presented, followed by a critical analysis of the effects of textural properties and surface functionality on CO₂ adsorption, including CO₂ uptake, CO₂/N₂ selectivity, and isosteric heat of adsorption. This analysis led to the introduction of a V_microx N-content factor to evaluate the interplay between N-content and textural properties to maximize the CO₂ uptake. Despite their promising performance in CO₂ uptake, further testing using mixtures and impurities, and studies on adsorbent regeneration, and cyclic operation are desirable to demonstrate the stability of the MDCs and ZTCs for large scale processes. In addition, advances in scale-up syntheses and their economics are needed.

Carbon Dioxide Capture through Physical and Chemical Adsorption Using Porous Carbon Materials: A Review

Due to rapid industrialization and urban development across the globe, the emission of carbon dioxide (CO2) has been significantly increased, resulting in adverse effects on the climate and ecosystems. In this regard, carbon capture and storage (CCS) is considered to be a promising technology in reducing atmospheric CO2 concentration. Among the CO2 capture technologies, adsorption has grabbed significant attention owing to its advantageous characteristics discovered in recent years. Porous carbon-based materials have emerged as one of the most versatile CO2 adsorbents. Numerous research activities have been conducted by synthesizing carbon-based adsorbents using different precursors to investigate their performances towards CCS. Additionally, amine-functionalized carbon-based adsorbents have exhibited remarkable potential for selective capturing of CO2 in the presence of other gases and humidity conditions. The present review describes the CO2 emission sources, health, and environmental impacts of CO2 towards the human beings, options for CCS, and different CO2 separation technologies. Apart from the above, different synthesis routes of carbon-based adsorbents using various precursors have been elucidated. The CO2 adsorption selectivity, capacity, and reusability of the current and applied carbon materials have also been summarized. Furthermore, the critical factors controlling the adsorption performance (e.g., the effect of textural and functional properties) are comprehensively discussed. Finally, the current challenges and future research directions have also been summarized.

Experimental Study on the Kinetics of CO2 and H2O Adsorption on Honeycomb Carbon Monoliths under Cement Flue Gas Conditions

The main challenge of adsorption consists in the production of materials that can be used in real situations. This study comprehensively describes the CO₂ and H₂O adsorption behavior of honeycomb-shaped sorbents commonly used in rapid pressure swing adsorption cycles (RPSA). With this purpose, the kinetics and equilibrium of adsorption of CO₂/H₂O/N₂ mixtures on three honeycomb carbon monoliths (793, 932, and AM03) were assessed in a thermogravimetric analyzer (TGA) under different postcombustion capture scenarios (temperature of 50 °C and several concentrations of CO₂). The kinetics study exhibited that the single adsorption of CO₂ and H₂O can be adequately described by the Avrami and exponential decay-2 models, respectively. As expected, the three carbon monoliths presented fast adsorption of CO₂ from a CO₂/H₂O mixture. Furthermore, when humid flue gas was considered, overall adsorption kinetics were governed by CO₂. Besides, the experimental data fitting to the intraparticle diffusion model showed that gradual CO₂ and H₂O diffusion toward the micropores was the rate-limiting stage. The obtained results give a better insight into the selective adsorption of CO₂ and the potential of honeycomb carbon monoliths to separate CO₂ from humid flue gas in the context of the cement industry. Carbon monolith 793 is the best carbon monolith candidate to capture CO₂ under the evaluated conditions: a capacity of adsorption of 1 mmol of CO₂ g^-1 and favorable kinetics in 32 vol % CO₂ and 4 vol % H₂O_(v), at 50 °C and 101.3 kPa.

Optimizing the Properties of Hybrids Based on Graphene Oxide for Carbon Dioxide Capture

The reduction of CO2 emissions and its elimination from the atmosphere has become one of the major problems worldwide, since CO2 is the main cause of the greenhouse effect and climate change. In recent years, a great number of carbonaceous materials that can be used as CO2 adsorbents have been synthesized. The strategy is usually to synthesize the materials and determine their adsorption capacity without studying previously the factors that influence this capacity. In this work, different properties of the adsorbents are analyzed to study their influence on the CO2 adsorption capacity. For this purpose, 10 adsorbents have been synthesized using different strategies and characterized with X-ray photoelectron spectroscopy, X-ray diffraction, and micro-Raman spectroscopy. The percentage of sp2 carbons, the position of the D + D' peak of the second-order Raman spectrum, the micropore volume, and the grain size of the C sp2 domains have been related to the amount of CO2 adsorbed by the adsorbents. The results confirm a linear relationship between the volume of the micropores and the CO2 uptake and it proves that CO2 retention is favored in those materials that, in addition to having a high volume of micropores, also have low grain size of C.

Efficient CO2 catalytic hydrogenation over CuOx–ZnO/silicalite-1 with stable Cu+ species

Efficient and stable CuOx–ZnO/S-1 catalysts for CO2 hydrogenation were inexpensively prepared, in which the ZnO–Cu2O interface and silanol nests play key roles.

Benzene and triazine-based porous organic polymers with azo, azoxy and azodioxy linkages: a computational study

Computational study of azoxy and azodioxy-based 2D layered structures revealed their potential for the selective binding of CO2 over N2.

Achieving High-Selective CO2 Adsorption on SAPO-35 Zeolites by Template-Modulating Framework Silicon Content

Small-pore silicoaluminophosphate (SAPO) zeolites with 8-ring pore windows and appropriate acidities/polarities, for example, SAPO-34 (CHA) and SAPO-56 (AFX) have proven as potential adsorbing materials for selective adsorption of CO2. However,...

Capture of carbon dioxide and hydrogen by engineered Escherichia coli: hydrogen-dependent CO2 reduction to formate

In times of global climate change and the fear of dwindling resources, we are facing different considerable challenges such as the replacement of fossil fuel-based energy carriers with the coincident maintenance of the increasing energy supply of our growing world population. Therefore, CO₂ capturing and H₂ storing solutions are urgently needed. In this study, we demonstrate the production of a functional and biotechnological interesting enzyme complex from acetogenic bacteria, the hydrogen-dependent CO₂ reductase (HDCR), in the well-known model organism Escherichia coli. We identified the metabolic bottlenecks of the host organisms for the production of the HDCR enzyme complex. Here we show that the recombinant expression of a heterologous enzyme complex transforms E. coli into a whole-cell biocatalyst for hydrogen-driven CO₂ reduction to formate without the need of any external co-factors or endogenous enzymes in the reaction process. This shifts the industrial platform organism E. coli more and more into the focus as biocatalyst for CO₂-capturing and H₂-storage. KEY POINTS: • A functional HDCR enzyme complex was heterologously produced in E. coli. • The metabolic bottlenecks for HDCR production were identified. • HDCR enabled E. coli cell to capture and store H₂ and CO₂ in the form of formate.

The inorganic cation-tailored "trapdoor" effect of silicoaluminophosphate zeolite for highly selective CO2 separation

Functional nanoporous materials are widely explored for CO2 separation, in particular, small-pore aluminosilicate zeolites having a "trapdoor" effect. Such an effect allows the specific adsorbate to push away the sited cations inside the window followed by exclusive admission to the zeolite pores, which is more advantageous for highly selective CO2 separation. Herein, we demonstrated that the protonated organic structure-directing agent in the small-pore silicoaluminophosphate (SAPO) RHO zeolite can be directly exchanged with Na+, K+, or Cs+ and that the Na+ form of SAPO-RHO exhibited unprecedented separation for CO2/CH4, superior to all of the nanoporous materials reported to date. Rietveld refinement revealed that Na+ is sited in the center of the single eight-membered ring (s8r), while K+ and Cs+ are sited in the center of the double 8-rings (d8rs). Theoretical calculations showed that the interaction between Na+ and the s8r in SAPO-RHO was stronger than that in aluminosilicate RHO, giving an enhanced "trapdoor" effect and record high selectivity for CO2 with the separation factor of 2196 for CO2/CH4 (0.02/0.98 bar). The separation factor of Na-SAPO-RHO for CO2/N2 was 196, which was the top level among zeolitic materials. This work opens a new avenue for gas separation by using diverse silicoaluminophosphate zeolites in terms of the cation-tailored "trapdoor" effect.

Sustainable mixed matrix membranes containing porphyrin and polysulfone polymer for acid gas separations

The synergetic effect of nitrogen-rich and CO₂-philic filler and polymer in mixed matrix-based membranes (MMMs) can separate CO₂ competently. The introduction of well-defined nanostructured porous fillers of pores close to the kinetic diameter of the gas molecule and polymer matrix compatibility is a challenge in improving the gas transportation characteristics of MMMs. This study deals with the preparation of porphyrin filler and the polysulfone (PSf) polymer MMMs. The fillers demonstrated uniform distribution, uniformity, and successful bond formation. MMMs demonstrated high thermal stability with a glass transition temperature in the range of 480-610 °C. The porphyrin filler exhibited microporous nature with the presence of π-π bonds and Lewis's basic functionalities between filler-polymer resulted in a highly CO₂-philic structure. The pure and mixed gas permeabilities and selectivity were successfully improved and surpass the Robeson's upper bound curve's tradeoff. Additionally, the temperature influence on CO₂ permeability revealed lower activation energies at higher temperatures leading to the gas transport facilitation. This can be granted consistency and long-term durability in polymer chains. These results highlight the unique properties of porphyrin fillers in CO₂ separation mixed matrix membranes and offer new knowledge to increase comprehension of PSf performance under various contents or environments.

In-situ pyrolysis of Taihu blue algae biomass as appealing porous carbon adsorbent for CO2 capture: Role of the intrinsic N

An environment-friendly, cost-effective, and facile N self-doping porous carbon (NC) were prepared through in-situ pyrolysis of nitrogen abundant Taihu blue algae biomass for CO₂ uptake. It was found that the CO₂ sorption capacity of porous carbon prepared through carbonization at 800 °C with KOH activation (N-C-800) exhibit higher CO₂ uptake capacity of 4.88 (1 bar and 0 °C) and 2.76 mmol/g (1 bar and 25 °C) respectively, with the CO₂/N₂ selectivity of N-C-800 attaining 39.3. Besides, the adsorption capacity of N-C-800 remained stable even after 7 repeated cycles, with a slight loss of nearly 6%. Moreover, total graphitic N (N_tg) sources from the intrinsic N in N-C-800 is not only higher than other agro-sourced porous carbon materials, but the graphitic N performed a sound correlation with the CO₂ uptake capacity. Combining experiments with Density Functional Theory (DFT) calculations, higher adsorption energy of N-C-800 (-13.6 kJ/mol, comparing with -6.9 kJ/mol of N-free carbon framework) would render the efficient adsorption of CO₂ molecular onto the graphitic N site. The current study not only provides a new option for the reclamation of Taihu blue algae biomass as N self-doping material, but a proof-of-concept investigation employing NC materials as an appealing candidate for CO₂ capture.

Understanding the Effect of Water on CO2 Adsorption

Carbon capture from large sources and ambient air is one of the most promising strategies to curb the deleterious effect of greenhouse gases. Among different technologies, CO₂ adsorption has drawn widespread attention mostly because of its low energy requirements. Considering that water vapor is a ubiquitous component in air and almost all CO₂-rich industrial gas streams, understanding its impact on CO₂ adsorption is of critical importance. Owing to the large diversity of adsorbents, water plays many different roles from a severe inhibitor of CO₂ adsorption to an excellent promoter. Water may also increase the rate of CO₂ capture or have the opposite effect. In the presence of amine-containing adsorbents, water is even necessary for their long-term stability. The current contribution is a comprehensive review of the effects of water whether in the gas feed or as adsorbent moisture on CO₂ adsorption. For convenience, we discuss the effect of water vapor on CO₂ adsorption over four broadly defined groups of materials separately, namely (i) physical adsorbents, including carbons, zeolites and MOFs, (ii) amine-functionalized adsorbents, and (iii) reactive adsorbents, including metal carbonates and oxides. For each category, the effects of humidity level on CO₂ uptake, selectivity, and adsorption kinetics under different operational conditions are discussed. Whenever possible, findings from different sources are compared, paying particular attention to both similarities and inconsistencies. For completeness, the effect of water on membrane CO₂ separation is also discussed, albeit briefly.

Capture and Reuse of Carbon Dioxide (CO2) for a Plastics Circular Economy: A Review

Plastic production has been increasing at enormous rates. Particularly, the socioenvironmental problems resulting from the linear economy model have been widely discussed, especially regarding plastic pieces intended for single use and disposed improperly in the environment. Nonetheless, greenhouse gas emissions caused by inappropriate disposal or recycling and by the many production stages have not been discussed thoroughly. Regarding the manufacturing processes, carbon dioxide is produced mainly through heating of process streams and intrinsic chemical transformations, explaining why first-generation petrochemical industries are among the top five most greenhouse gas (GHG)-polluting businesses. Consequently, the plastics market must pursue full integration with the circular economy approach, promoting the simultaneous recycling of plastic wastes and sequestration and reuse of CO2 through carbon capture and utilization (CCU) strategies, which can be employed for the manufacture of olefins (among other process streams) and reduction of fossil-fuel demands and environmental impacts. Considering the previous remarks, the present manuscript’s purpose is to provide a review regarding CO2 emissions, capture, and utilization in the plastics industry. A detailed bibliometric review of both the scientific and the patent literature available is presented, including the description of key players and critical discussions and suggestions about the main technologies. As shown throughout the text, the number of documents has grown steadily, illustrating the increasing importance of CCU strategies in the field of plastics manufacture.

Asynchronous Double Schiff Base Formation of Pyrazole Porous Polymers for Selective Pd Recovery

Pyrazole-linked covalent organic polymer is synthesized using an asynchronous double Schiff base from readily available monomers. The one-pot reaction features no metals as a building block or reagent, hence facilitating the structural purity and industrial scalability of the design. Through a single-crystal study on a model compound, the double Schiff base formation is found to follow syn addition, a kinetically favored product, suggesting that reactivity of the amine and carbonyls dictate the order and geometry of the framework building. The highly porous pyrazole polymer COP-214 is chemically resistant in reactive conditions for over two weeks and thermally stable up to 425 °C in air. COP-214 shows well-pronounced gas capture and selectivities, and a high CO2/N2 selectivity of 102. The strongly coordinating pyrazole sites show rapid uptake and quantitative selectivity of Pd (II) over several coordinating metals (especially Pt (II)) at all pH points that are tested, a remarkably rare feature that is best explained by detailed analysis as the size-selective strong coordination of Pd onto pyrazoles. Density functional theory (DFT) calculations show energetically favorable Pd binding between the metal and N-sites of COP-214. The polymer is reusable multiple times without loss of activity, providing great incentives for an industrial prospect.

Advances in Post-Combustion CO2 Capture by Physical Adsorption: From Materials Innovation to Separation Practice

The atmospheric CO₂ concentration continues a rapid increase to its current record high value of 416 ppm for the time being. It calls for advanced CO₂ capture technologies. One of the attractive technologies is physical adsorption-based separation, which shows easy regeneration and high cycle stability, and thus reduced energy penalties and cost. The extensive research on this topic is evidenced by the growing body of scientific and technical literature. The progress spans from the innovation of novel porous adsorbents to practical separation practices. Major CO₂ capture materials include the most widely used industrially relevant porous carbons, zeolites, activated alumina, mesoporous silica, and the newly emerging metal-organic frameworks (MOFs) and covalent-organic framework (COFs). The key intrinsic properties such as pore structure, surface chemistry, preferable adsorption sites, and other structural features that would affect CO₂ capture capacity, selectivity, and recyclability are first discussed. The industrial relevant variables such as particle size of adsorbents, the mechanical strength, adsorption heat management, and other technological advances are equally important, even more crucial when scaling up from bench and pilot-scale to demonstration and commercial scale. Therefore, we aim to bring a full picture of the adsorption-based CO₂ separation technologies, from adsorbent design, intrinsic property evaluation to performance assessment not only under ideal equilibrium conditions but also in realistic pressure swing adsorption processes.

Great Location: About Effects of Surface Bound Neighboring Groups for Passive and Active Fine-Tuning of CO2 Adsorption Properties in Model Carbon Capture Materials

Improved carbon capture materials are crucial for managing the CO2 level in the atmosphere. The past focus was on increasing adsorption capacities. It is widely known that controlling the heat of adsorption (ΔHads ) is equally important. If it is too low, CO2 uptake takes place at unfavorable conditions and with insufficient selectivity. If it is too high, chemisorption occurs, and the materials can hardly be regenerated. The conventional approach for influencing ΔHads is the modification of the adsorbing center. This paper proposes an alternative strategy. The hypothesis is that fine-tuning of the molecular environment around the adsorbing center is a powerful tool for the adjustment of CO2 -binding properties. Via click chemistry, any desired neighboring group (NG) can be incorporated on the surfaces of the nanoporous organosilica model materials. Passive NGs induce a change in the polarity of the surface, whereas active NGs are capable of direct interaction with the active center/CO2 pair. The effects on ΔHads and on the selectivity are studied. A situation can be realized which resembles frustrated Lewis acid-base pairs, and the investigation of the binding-species by solid-state NMR indicates that the push-pull effects could play an essential role not only in CO2 adsorption but also in its activation.

Covalent Amine Tethering on Ketone Modified Porous Organic Polymers for Enhanced CO2 Capture

Effective removal of excess greenhouse gas CO₂ necessitates new adsorbents that can overcome the shortcomings of the current capture methods. To achieve that, porous materials are often modified post-synthetically with reactive amine functionalities but suffer from significant surface area losses. Herein, we report a successful amine post-functionalization of a highly porous covalent organic polymer, COP-130, without losing much porosity. By varying the amine substituents, we recorded a remarkable increase in CO₂ uptake and selectivity. Ketone functionality, a rarely accessible functional group for porous polymers, was inserted prior to amination and led to covalent tethering of amines. Interestingly, aminated polymers demonstrated relatively low heats of adsorption, which is useful for the rapid recyclability of materials, due to the formation of suspected intramolecular hydrogen bonding.

Multifunctional ionic porous frameworks for CO2 conversion and combating microbes

Porous organic frameworks (POFs) with a heteroatom rich ionic backbone have emerged as advanced materials for catalysis, molecular separation, and antimicrobial applications. The loading of metal ions further enhances Lewis acidity, augmenting the activity associated with such frameworks. Metal-loaded ionic POFs, however, often suffer from physicochemical instability, thereby limiting their scope for diverse applications. Herein, we report the fabrication of triaminoguanidinium-based ionic POFs through Schiff base condensation in a cost-effective and scalable manner. The resultant N-rich ionic frameworks facilitate selective CO2 uptake and afford high metal (Zn(ii): 47.2%) loading capacity. Owing to the ionic guanidinium core and ZnO infused mesoporous frameworks, Zn/POFs showed pronounced catalytic activity in the cycloaddition of CO2 and epoxides into cyclic organic carbonates under solvent-free conditions with high catalyst recyclability. The synergistic effect of infused ZnO and cationic triaminoguanidinium frameworks in Zn/POFs led to robust antibacterial (Gram-positive, Staphylococcus aureus and Gram-negative, Escherichia coli) and antiviral activity targeting HIV-1 and VSV-G enveloped lentiviral particles. We thus present triaminoguanidinium-based POFs and Zn/POFs as a new class of multifunctional materials for environmental remediation and biomedical applications.

Dry reforming of methane by stable Ni-Mo nanocatalysts on single-crystalline MgO

Large-scale carbon fixation requires high-volume chemicals production from carbon dioxide. Dry reforming of methane could provide an economically feasible route if coke- and sintering-resistant catalysts were developed. Here, we report a molybdenum-doped nickel nanocatalyst that is stabilized at the edges of a single-crystalline magnesium oxide (MgO) support and show quantitative production of synthesis gas from dry reforming of methane. The catalyst runs more than 850 hours of continuous operation under 60 liters per unit mass of catalyst per hour reactive gas flow with no detectable coking. Synchrotron studies also show no sintering and reveal that during activation, 2.9 nanometers as synthesized crystallites move to combine into stable 17-nanometer grains at the edges of MgO crystals above the Tammann temperature. Our findings enable an industrially and economically viable path for carbon reclamation, and the "Nanocatalysts On Single Crystal Edges" technique could lead to stable catalyst designs for many challenging reactions.

Quantifying the nitrogen effect on CO2 capture using isoporous network polymers

The impact of nitrogen atoms on CO₂ binding was evaluated for two isostructural porous bisimidazole-linked polymers (BILPs), which serendipitously had identical surface areas and pore size distributions, a very rare observation. The two structures differ only in the core of the trialdehyde component, the nitrogen atom (BILP-19) versus benzene ring (BILP-5). Such a slight difference, however, has brought about a stronger CO₂ capture capacity of BILP-19 and hence increased CO₂/N₂ separation capability.

Constructing Hierarchical Porous Carbons With Interconnected Micro-mesopores for Enhanced CO2 Adsorption

A high cost-performance carbon dioxide sorbent based on hierarchical porous carbons (HPCs) was easily prepared by carbonization of raw sugar using commercially available nano-CaCO3 as a double-acting template. The effects of the initial composition and carbonization temperature on the micro-mesoporous structure and adsorption performance were examined. Also, the importance of post-activation behavior in the development of micropores and synthesis route for the formation of the interconnected micro-mesoporous structure were investigated. The results revealed excellent carbon dioxide uptake reaching up 2.84 mmol/g (25oC, 1 bar), with micropore surface area of 786 m2/g, micropore volume of 0.320 cm3/g and mesopore volume of 0.233 cm3/g. We found that high carbon dioxide uptake was ascribed to the developed micropores and interconnected micro-mesoporous structure. As an expectation, the optimized HPCs offers a promising new support for the high selective capture of carbon dioxide in the future.