Alginate beads provide a beneficial physical barrier against native microorganisms in wastewater treated with immobilized bacteria and microalgae

The effect of the microalgae-bacteria microbiome on wastewater treatment and biomass production

The use of microalgae for wastewater treatment has been proposed as a cost-effective method to produce biofuels while remediating waste streams. This study examined the microalgae biomass production rate, wastewater treatment efficiency, and prokaryotic organism microbiome associated with microalgae Chlorella sorokiniana cultivated on anaerobic digestate effluent. Final microalgae biomass concentrations from nine photobioreactors were highly variable and had values that ranged between 0.14 g/L and 0.90 g/L. Nutrient removal efficiencies for TN (total nitrogen), N-NH₄ (ammonium nitrogen), and COD (chemical oxygen demand) ranged from 34% to 67%, 65% to 97%, and-60% to 14%, respectively. Analysis of individual OTUs (operational taxonomic units) from the microbial community revealed that microalgae biomass concentrations were significantly correlated with the relative abundance of OTUs in the genus Pusillimonas. Predictive metagenomic analyses identified additional correlations associated with biomass production and nutrient removal. These results suggest that the microbial community present during microalgae cultivation on wastewater can impact the performance of the system for biomass production and wastewater treatment.

Microalgae wastewater treatment: Biological and technological approaches

Current global environmental issues raise unavoidable challenges for our use of natural resources. Supplying the human population with clean water is becoming a global problem. Numerous organic and inorganic impurities in municipal, industrial, and agricultural waters, ranging from microplastics to high nutrient loads and heavy metals, endanger our nutrition and health. The development of efficient wastewater treatment technologies and circular economic approaches is thus becoming increasingly important. The biomass production of microalgae using industrial wastewater offers the possibility of recycling industrial residues to create new sources of raw materials for energy and material use. This review discusses algae-based wastewater treatment technologies with a special focus on industrial wastewater sources, the potential of non-conventional extremophilic (thermophilic, acidophilic, and psychrophilic) microalgae, and industrial algae-wastewater treatment concepts that have already been put into practice.

Sustainable production of bio-crude oil via hydrothermal liquefaction of symbiotically grown biomass of microalgae-bacteria coupled with effective wastewater treatment

The study demonstrates a sustainable process for production of bio-crude oil via hydrothermal liquefaction of microbial biomass generated through co-cultivation of microalgae and bacteria coupled with wastewater remediation. Biomass concentration and wastewater treatment efficiency of a tertiary consortium (two microalgae and two bacteria) was evaluated on four different wastewater samples. Total biomass concentration, total nitrogen and COD removal efficiency was found to be 3.17 g L⁻¹, 99.95% and 95.16% respectively when consortium was grown using paper industry wastewater in a photobioreactor under batch mode. Biomass concentration was enhanced to 4.1 g L⁻¹ through intermittent feeding of nitrogen source and phosphate. GC-MS and FTIR analysis of bio-crude oil indicates abundance of the hydrocarbon fraction and in turn, better oil quality. Maximum distillate fraction of 30.62% lies within the boiling point range of 200–300 °C depicting suitability of the bio-crude oil for conversion into diesel oil, jet fuel and fuel for stoves.

Enhanced Gold Biosorption of Lysinibacillus sphaericus CBAM5 by Encapsulation of Bacteria in an Alginate Matrix

Given its variety of properties, including conductivity and slow corrosion, the industrial uses for gold are increasing dramatically. This means that greater amounts of gold are being released into the environment and that a biological approach to recycling gold is of great interest. Lysinibacillus sphaericus, a bacterium capable of metal accumulation inside the cell and adsorption in the external surface, was encapsulated in an alginate matrix to improve the capture of gold from aqueous media. In this study, L. sphaericus CBAM5 proved to have the greatest potential compared to other strains and, following its encapsulation, the efficiency for the removal of the precious metal, at a concentration of 60 ppm, was 100% after three hours of exposure. It was identified that the alginate spheres with bacteria could also be reused. In fact, an efficiency of 60% was retained after three cycles of utilization. Thus, alginate acts as an adequate immobilization matrix for bacteria as a highly effective gold capture mechanism, which also shows great potential as an alternative for biotechnological applications.

Immobilized oleaginous microalgae as effective two-phase purify unit for biogas and anaerobic digester effluent coupling with lipid production

Oleaginous microalga Scenedesmus sp. was immobilized in alginate-gel beads and applied as two-phase purify unit for biogas and anaerobic digester effluent from palm oil mill. Optimal microalgal cell concentration and bead volume ratio were 10⁶ cells mL^-1 and 25% v/v, respectively. The use of 20% effluent and light intensity at 128 µmol·proton·m^-2 s^-1 most promoted CO₂ removal by immobilized microalgae and achieved the maximum CO₂ removal rate of 4.63 kg-CO₂ day^-1 m^-3. This process upgraded methane content in biogas (>95%) and completely remove nitrogen and phosphorus in the effluent. After process operation, 2.98 g L^-1 microalgal biomass with 35.92% lipid content were recovered by simple sieving method. Microalgal lipids are composed of C16-C18 (>98%) with prospect high cetane number and short ignition delay time. This study has shown the promising biorefinery concept which is effective not only in CO₂ fixation, biogas upgrading and pollutant removal but also cost-effective production of microalgae-based biofuel.

Alginate-based composites for environmental applications: A critical review

Alginate-based composites have been extensively studied for applications in energy and environmental sectors due to their biocompatible, nontoxic, and cost-effective properties. This review is designed to provide an overview of the synthesis and application of alginate-based composites. In addition to an overview of current understanding of alginate biopolymer, gelation process, and cross-linking mechanisms, this work focuses on adsorption mechanisms and performance of different alginate-based composites for the removal of various pollutants including dyes, heavy metals, and antibiotics in water and wastewater. While encapsulation in alginate gel beads confers protective benefits to engineered nanoparticles, carbonaceous materials, cells and microbes, alginate-based composites typically exhibit enhanced adsorption performance. The physical and chemical properties of alginate-based composites determine the effectiveness under different application conditions. A series of alginate-based composites and their physicochemical and sorptive properties have been summarized. This critical review not only summarizes recent advances in alginate-based composites but also presents a perspective of future work for their environmental applications.

Immobilization of Sphingomonas sp. GY2B in polyvinyl alcohol-alginate-kaolin beads for efficient degradation of phenol against unfavorable environmental factors

In this study, batch experiments were carried out to evaluate the biodegradation of phenol by Sphingomonas sp. GY2B, which were immobilized in polyvinyl alcohol (PVA)-sodium alginate-kaolin beads under different conditions. The optimal degradation performance was achieved by GY2B immobilized in beads containing 1.0% (w/v) of kaolin, 10% (w/v) of PVA, 0.3% (w/v) of sodium alginate, 10% (v/v) of biomass dosage, and exposed to an initial phenol concentration of 100 mg/L. The experimental results indicated that PVA-sodium alginate-kaolin beads can accelerate the degradation rate of phenol by reducing the degradation time and also improve degradation rate. The biodegradation rate of phenol by immobilized cells (16.79 ± 0.81 mg/(L·h)) was significantly higher than that of free cells (11.49 ± 1.29 mg/(L·h)) under the above optimal conditions. GY2B immobilized on beads was more competent than free GY2B in degradation under conditions with high phenol concentrations (up to 300 mg/L) and in strong acidic (pH = 1) and alkaline (pH = 12) environments. Higher phenol concentrations inhibit the biomass and reduce the biodegradation rate, while the lower biodegradation rate at low initial phenol concentrations is attributed to mass transfer limitations. The Haldane inhibitory model was in agreement with the experimental data well, revealing that phenol showed a considerable inhibitory effect on the biodegradation by Sphingomonas sp. GY2B, especially at concentrations higher than 90 mg/L. Intra-particle diffusion model analysis suggests that adsorption of phenol by immobilized beads was controlled by both rapid surface adsorption as well as pore diffusion mechanism. It's worth noting that the presence of 1 mg/L Cr(VI) enhanced the biodegradation of phenol by free cells, while Cr(VI) showed no obvious impact on the removal of phenol by immobilized cells. In addition, immobilized cells were reused 16 times and removed 99.5% phenol, and when stored at 4 °C for 90 days, more than 99% phenol was removed. These results showed that immobilized cells can significantly improve the microbial degradation performance, and protect microorganisms against unfavorable environment. It is implied that PVA -sodium alginate-kaolin beads have great potential to be applied in a practical and economical phenolic wastewater treatment system.

Process integration for biological sulfate reduction in a carbon monoxide fed packed bed reactor

This study examined immobilized anaerobic biomass for sulfate reduction using carbon monoxide (CO) as the sole carbon source under batch and continuous fed conditions. The immobilized bacteria with beads made of 10% polyvinyl alcohol (PVA) showed best results in terms of sulfate reduction (84 ± 3.52%) and CO utilization (98 ± 1.67%). The effect of hydraulic retention time (HRT), sulfate loading rate and CO loading rate on sulfate and CO removal was investigated employing a 1L packed bed bioreactor containing the immobilized biomass. At 48, 24 and 12 h HRT, the sulfate removal was 94.42 ± 0.15%, 89.75 ± 0.47% and 61.08 ± 0.34%, respectively, along with a CO utilization of more than 90%. The analysis of variance (ANOVA) of the results obtained showed that only the initial CO concentration significantly affected the sulfate reduction process. The reactor effluent sulfate concentrations were 27.41 ± 0.44, 59.16 ± 1.08, 315.83 ± 7.33 mg/L for 250, 500 and 1000 mg/L of influent sulfate concentrations respectively, under the optimum operating conditions. The sulfate reduction rates matched well with low inlet sulfate loading rates, indicating stable performance of the bioreactor system. Overall, this study yielded very high sulfate reduction efficiency by the immobilized anaerobic biomass under high CO loading condition using the packed bed reactor system.

Strengthening calcium alginate microspheres using polysulfone and its performance evaluation: Preparation, characterization and application for enhanced biodegradation of chlorpyrifos

Bacterial cell immobilization offer considerable advantages over traditional biotreatment systems using free cells. Calcium alginate matrix usually used for bacterial immobilization is susceptible to biodegradation in harsh environment. Current study aimed to produce and characterize stable macrocapsules (MCs) of Chlorpyrifos (CP) degrading bacterial consortium using biocompatible calcium alginate matrix coupled with environmentally stable polysulfone. In current study bacterial consortium capable of CP biodegradation was immobilized using calcium alginate in a form of microcapsule (MC) reinforced by being coated with a synthetic polymer polysulfone (PSf) through phase inversion. Consortium comprised of five bacterial strains was immobilized using optimized concentration of sodium alginate (2.5gL^-1), calcium chloride (6gL^-1), biomass (600mgL^-1) and polysulfone (10gL^-1). It has been observed that MCs have high thermal, pH and chemical stability than CAMs. In synthetic media complete biodegradation of CP (100-600mgL^-1) was achieved using macrocapsules (MCs) within 18h. CAMs could be reused effectively only upto 5cycles, contrary to this MCs could be used 13 times to achieve more than >96% CP degradation. Shelf life and reusability studies conducted for MCs indicated unaltered biomass retention and CP biodegradation activity (95%) over 16weeks of storage. MCs achieved complete biodegradation of CP (536mgL^-1) in real industrial wastewater and reused several times effectively. Metabolites (3,5,6-trichloro-2-pyridinol (TCP), 3,5,6-trichloro-2-methoxypyridine (TMP) and diethyl-thiophosphate (DETP) were traced using GC-MS and possible metabolic pathway was constructed. Study indicated MCs could be used for cleanup of CP contaminated wastewater repeatedly, safely, efficiently for a longer period of time.

A Review of Environmental Contamination and Health Risk Assessment of Wastewater Use for Crop Irrigation with a Focus on Low and High-Income Countries

Population densities and freshwater resources are not evenly distributed worldwide. This has forced farmers to use wastewater for the irrigation of food crops. This practice presents both positive and negative effects with respect to agricultural use, as well as in the context of environmental contamination and toxicology. Although wastewater is an important source of essential nutrients for plants, many environmental, sanitary, and health risks are also associated with the use of wastewater for crop irrigation due to the presence of toxic contaminants and microbes. This review highlights the harmful and beneficial impacts of wastewater irrigation on the physical, biological, and chemical properties of soil (pH, cations and anions, organic matter, microbial activity). We delineate the potentially toxic element (PTEs) build up in the soil and, as such, their transfer into plants and humans. The possible human health risks associated with the use of untreated wastewater for crop irrigation are also predicted and discussed. We compare the current condition of wastewater reuse in agriculture and the associated environmental and health issues between developing and developed countries. In addition, some integrated sustainable solutions and future perspectives are also proposed, keeping in view the regional and global context, as well as the grounded reality of wastewater use for crop production, sanitary and planning issues, remedial techniques, awareness among civil society, and the role of the government and the relevant stakeholders.

Nitrogen removal performance and microbial community changes in subsurface wastewater infiltration systems (SWISs) at low temperature with different bioaugmentation strategies

Poor nitrogen removal efficiency (mainly nitrate, NO₃^--N) at low temperatures strongly limits application of subsurface wastewater infiltration systems (SWISs). Seven psychrophilic strains (heterotrophic nitrifying bacteria and aerobic denitrifying bacteria) were isolated and added to SWISs to investigate the effect of embedding and direct-dosing bioaugmentation strategies on sewage treatment performance at low temperature. Both bioaugmentation strategies improved ammonium (NH₄⁺-N) removal efficiencies, and the embedding strategy also exhibited satisfactory NO₃^--N and total nitrogen (TN) removal efficiencies. Pyrosequencing results of the bacterial 16S rRNA gene indicated that the embedding strategy significantly decreased the indigenous soil microbial diversity (p < .05) and altered the bacterial community structure, significantly increasing the relative abundance of Clostridia, which have good nitrate-reducing activity.

Feasibility of Marine Microalgae Immobilization in Alginate Bead for Marine Water Treatment: Bead Stability, Cell Growth, and Ammonia Removal

Sodium alginate is the most commonly used polymer matrix in microalgae immobilization for water treatment. However, the susceptibility of alginate matrixes to cation chelating agents and antigelling cation limits the use of alginates in estuarine and marine systems. Hence, the present study aims to investigate the stability of alginate bead in marine water and the feasibility of microalgae to grow when immobilized in alginate bead for marine water treatment. Different concentrations of alginate and hardening cation calcium were used to formulate beads. The beads were incubated in Guillard’s f/2 medium and shaken vigorously by using orbital shaker for 15 days. The results indicated that bead stability was enhanced by increasing alginate and CaCl2 concentrations. Subsequently, the marine microalga, Nannochloropsis sp., was immobilized in calcium alginate bead. The growth and ammoniacal-nitrogen (NH4+-N) uptake by immobilized cell were compared with free cell culture in f/2 medium. Specific growth rate of immobilized cell (0.063 hr−1) was significantly higher than free cell (0.027 hr−1). There was no significant difference on specific uptake rate of free cell and immobilized cell; but immobilized cell removed significantly more NH4+-N (82.2%) than free cell (47.3%) culture at the end of the experiment. The present study demonstrated the potential use of alginate immobilization technique in marine microalgae culture and water treatment simultaneously.

Municipal wastewater treatment via co-immobilized microalgal-bacterial symbiosis: Microorganism growth and nutrients removal

A symbiotic microalgal-bacterial system may be an optional technology for wastewater treatment. In this study, co-immobilized of a bacterium isolated from a municipal wastewater treatment plant (Pseudomonas putida) and a microalgae Chlorella vulgaris was used in the study of cell growth and nutrient removal during wastewater treatment under batch and continuous culture conditions. Under batch culture conditions, co-immobilization treatment significantly increased the cell density of C. vulgaris and P. putida compared with other treatments. The co-immobilized treatment also showed higher removal of ammonium, phosphate and COD than any single treatment, indicating that the nutrient uptake capability of C. vulgaris and P. Putida was mutually enhanced mutually. When tested in continuous mode, the treatment with a hydraulic retention time of 24h at the organic load rate of 1159.2mgCODL^-1d^-1 was most appropriate for wastewater treatment.

Non-sterile fermentations for the economical biochemical conversion of renewable feedstocks

Heavy reliance on petroleum-based products drives continuous exploitation of fossil fuels, and results in serious environmental and climate problems. To address such an issue, there is a shift from petroleum sources to renewable ones. Biochemical conversion via fermentation is a primary platform for converting renewable sources to biofuels and bulk chemicals. In order to provide cost-competitive alternatives, it is imperative to develop efficient, cost-saving, and robust fermentation processes. Non-sterile fermentation offers several benefits compared to sterile fermentation, including elimination of sterility, reduced maintenance requirements, relatively simple bioreactor design, and simplified operation. Thus, cost effectiveness of non-sterile fermentation makes it a practical platform for low cost, large volume production of biofuels and bulk chemicals. Many approaches have been developed to conduct non-sterile fermentation without sacrificing the yields and productivities of fermentation products. This review focuses on the strategies for conducting non-sterile fermentation. The challenges facing non-sterile fermentation are also discussed.

Microalgae: a robust "green bio-bridge" between energy and environment

Microalgae are a potential candidate for biofuel production and environmental treatment because of their specific characteristics (e.g. fast growth, carbon neutral, and rich lipid accumulations). However, several primary bottlenecks still exist in current technologies, including low biomass conversion efficiency, bio-invasion from the external environment, limited or costly nutrient sources, and high energy and capital input for harvest, and stalling its industrial progression. Coupling biofuel production with environmental treatment renders microalgae a more feasible feedstock. This review focuses on microalgae biotechnologies for both bioenergy generation and environmental treatment (e.g. CO₂ sequestration and wastewater reclamation). Different intelligent technologies have been developed, especially during the last decade, to eliminate the bottlenecks, including mixotrophic/heterotrophic cultivation, immobilization, and co-cultivation. It has been realized that any single purpose for the cultivation of microalgae is not an economically feasible option. Combinations of applications in biorefineries are gradually reckoned to be necessary as it provides more economically feasible and environmentally sustainable operations. This presents microalgae as a special niche occupier linking the fields of energy and environmental sciences and technologies. The integrated application of microalgae is also proven by most of the life-cycle analysis studies. This study summarizes the latest development of primary microalgal biotechnologies in the two areas that will bring researchers a comprehensive view towards industrialization with an economic perspective.

Biodegradation of 2-hydroxyl-1,4 naphthoquinone (lawsone) by Pseudomonas taiwanensis LH-3 isolated from activated sludge

2-hydroxy-1,4 naphthoquinone (lawsone) is widely used and induces environmental pollutions during its production and application. In the present study, a lawsone-degrading bacterium strain, LH-3 was successfully isolated from the activated sludge. Based on the 16S rRNA gene analysis, the strain LH-3 phylogenetically belonged to the Pseudomonas taiwanensis. It could degrade 200 mg L⁻¹ lawsone completely in 9 h with an inoculum quantity of 1% (v/v). The effects of environmental conditions on the degradation process and the degradation pathway were systematically investigated. LH-3 could maintain its high degradation efficiency under high salt condition. The identified intermediates of salicylic acid, 2-hydroxy-4-oxo-chroman-2-carboxylic acid, and catechol elucidated the potential degradation pathway. Furthermore, the immobilized LH-3 strain cells prepared with alginate gel and biochar performed excellent stability in nine successive degradation runs. It could sucessfully survive in laboratory scale sequencing batch reactor and become to be the dominant species. This study clearly revealed that LH-3 could serve as an attractive candidate for the microbial remediation of lawsone-containing wastewater.

Enhanced performance of the microalga Chlorella sorokiniana remotely induced by the plant growth-promoting bacteria Azospirillum brasilense and Bacillus pumilus

Remote effects (occurring without physical contact) of two plant growth-promoting bacteria (PGPB) Azospirillum brasilense Cd and Bacilus pumilus ES4 on growth of the green microalga Chlorella sorokiniana UTEX 2714 were studied. The two PGPB remotely enhanced the growth of the microalga, up to six-fold, and its cell volume by about three-fold. In addition to phenotypic changes, both bacteria remotely induced increases in the amounts of total lipids, total carbohydrates, and chlorophyll a in the cells of the microalga, indicating an alteration of the microalga’s physiology. The two bacteria produced large amounts of volatile compounds, including CO₂, and the known plant growth-promoting volatile 2,3-butanediol and acetoin. Several other volatiles having biological functions in other organisms, as well as numerous volatile compounds with undefined biological roles, were detected. Together, these bacteria-derived volatiles can positively affect growth and metabolic parameters in green microalgae without physical attachment of the bacteria to the microalgae. This is a new paradigm on how PGPB promote growth of microalgae which may serve to improve performance of Chlorella spp. for biotechnological applications.

Microalgal Cultivation in Secondary Effluent: Recent Developments and Future Work

Eutrophication of water catchments and the greenhouse effect are major challenges in developing the global economy in the near future. Secondary effluents, containing high amounts of nitrogen and phosphorus, need further treatment before being discharged into receiving water bodies. At the same time, new environmentally friendly energy sources need to be developed. Integrating microalgal cultivation for the production of biodiesel feedstock with the treatment of secondary effluent is one way of addressing both issues. This article provides a comprehensive review of the latest progress in microalgal cultivation in secondary effluent to remove pollutants and accumulate lipids. Researchers have discovered that microalgae remove nitrogen and phosphorus effectively from secondary effluent, accumulating biomass and lipids in the process. Immobilization of appropriate microalgae, and establishing a consortium of microalgae and/or bacteria, were both found to be feasible ways to enhance pollutant removal and lipid production. Demonstrations of pilot-scale microalgal cultures in secondary effluent have also taken place. However there is still much work to be done in improving pollutants removal, biomass production, and lipid accumulation in secondary effluent. This includes screening microalgae, constructing the consortium, making use of flue gas and nitrogen, developing technologies related to microalgal harvesting, and using lipid-extracted algal residues (LEA).

Uranium removal by novel graphene oxide-immobilized Saccharomyces cerevisiae gel beads

To evaluate its ability to absorb dissolved uranium (VI), the waste biomass of Saccharomyces cerevisiae was immobilized using different agents, including Ca-alginate (Ca-SA), Ca-alginate with graphene oxide (GO), polyvinyl alcohol (PVA, 5% or 10%, w/v)-SA-GO in CaCl₂-boric acid solution. The experimental results showed that graphene oxide at 0.01% (w/v) could enhance the performance of the immobilized cells. The yeast gel beads prepared with 5% PVA-1% SA-2% yeast-0.01% GO-2% CaCl₂-saturated boric acid (4#) generally showed the better physical-chemical properties such as higher tolerance to the unfavorable environmental conditions. Moreover, the 4# gel beads exhibited more stable capacity for U(VI) sorption and desorption at various conditions, such as pH in the range of 3-9. A pseudo second-order kinetic model could describe the kinetics of U(VI) sorption onto the 4# gel beads (R² = 0.96). The Langmuir, Freundlich, Tempkin and Sips models could be used to describe U(VI) sorption by the 4# gel beads, with the R² being 0.90, 0.83, 0.96, 0.97, respectively. The Sips maximum capacity of 4# gel beads was 24.4 mg U/g dry weight. The desorption efficiency of U(VI) adsorbed onto the 4# gel beads was 91%, 73% and 40% by 0.1 M HNO₃, 0.1 M HCl and 0.1 M NaOH, respectively. However, the 4# gel beads exhibited lower U(VI) sorption capacity than the raw yeast cell (Sips maximum capacity of 35.6 mg U/g). The immobilized Saccharomyces cerevisiae using SA, PVA and/or GO showed obvious changes in the molecular vibration of functional groups such as carboxyl, amide and hydroxyl groups compared with the raw yeast cells, according to FTIR analysis. The SEM-EDX analysis showed that U(VI) was adsorbed unevenly on the cellular surface. Carboxyl and hydroxyl groups may be involved in U(VI) binding by yeast cells.

Dual gradients of light intensity and nutrient concentration for full-factorial mapping of photosynthetic productivity

Optimizing bioproduct generation from microalgae is complicated by the myriad of coupled parameters affecting photosynthetic productivity. Quantifying the effect of multiple coupled parameters in full-factorial fashion requires a prohibitively high number of experiments. We present a simple hydrogel-based platform for the rapid, full-factorial mapping of light and nutrient availability on the growth and lipid accumulation of microalgae. We accomplish this without microfabrication using thin sheets of cell-laden hydrogels. By immobilizing the algae in a hydrogel matrix we are able to take full advantage of the continuous spatial chemical gradient produced by a diffusion-based gradient generator while eliminating the need for chambers. We map the effect of light intensities between 0 μmol m(-2) s(-1) and 130 μmol m(-2) s(-1) (∼28 W m(-2)) coupled with ammonium concentrations between 0 mM and 7 mM on Chlamydomonas reinhardtii. Our data set, verified with bulk experiments, clarifies the role of ammonium availability on the photosynthetic productivity Chlamydomonas reinhardtii, demonstrating the dependence of ammonium inhibition on light intensity. Specifically, a sharp optimal growth peak emerges at approximately 2 mM only for light intensities between 80 and 100 μmol m(-2) s(-1)- suggesting that ammonium inhibition is insignificant at lower light intensities. We speculate that this phenomenon is due to the regulation of the high affinity ammonium transport system in Chlamydomonas reinhardtii as well as free ammonia toxicity. The complexity of this photosynthetic biological response highlights the importance of full-factorial data sets as enabled here.

Immobilization of Ochrobactrum tritici As5 on PTFE thin films for arsenite biofiltration

Ochrobactrum tritici SCII24T bacteria is an environmental strain with high capacity to resist to arsenic (As) toxicity, which makes it able to grow in the presence of As(III). The inactivation of the two functional arsenite efflux pumps, ArsB and ACR3_1, resulted in the mutant O. tritici As5 exhibiting a high accumulation of arsenite. This work describes a method for the immobilization of the mutant cells O. tritici As5, on a commercial polymeric net after sputtered modified by the deposition of poly(tetrafluoroethylene) (PTFE) thin films, and demonstrates the capacity of immobilized cells to accumulate arsenic from solutions. Six different set of deposition parameters for PTFE thin films were developed and tested in vitro regarding their ability to immobilize the bacterial cells. The surface that exhibited a mild zeta potential value, hydrophobic characteristics, the lowest surface free energy but with a high polar component and the appropriate ratio of chemical reactive groups allowed cells to proliferate and to grow as a biofilm. These immobilized cells maintained their ability to accumulate the surrounding arsenite, making it a great arsenic biofilter to be used in bioremediation processes.

Exiguobacterium mediated arsenic removal and its protective effect against arsenic induced toxicity and oxidative damage in freshwater fish, Channa striata

Arsenic is a toxic metalloid existing widely in the environment, and its removal from contaminated water has become a global challenge. The use of bacteria in this regard finds a promising solution. In the present study, Exiguobacterium sp. As-9, which is an arsenic resistant bacterium, was selected with respect to its arsenic removal efficiency. Quantification of arsenic in the water treated with bacterium showed that Exiguobacterium efficiently removed up to 99% of arsenic in less than 20 h. In order to reveal the possible effect of this bacterium in removal of arsenic from water and protecting fishes from the detrimental effects of arsenic, we initiated a range of studies on fresh water fish, Channa striata. It was observed that the fishes introduced into bacteria treated water displayed no symptoms of arsenic toxicity which was marked by a decreased oxidative damage, whereas the fishes exposed to arsenic revealed a significant (p < 0.05) increase in the oxidative stress together with the elevated levels of malondialdehyde. Determination of the bioaccumulation of arsenic in the liver tissues of C. striata using hydride generation atomic absorption spectrophotometry (HG-AAS) revealed an increased As(III) accumulation in the fishes exposed to arsenic whereas the arsenic level in the control and bacteria treated fishes were found below the detectable limit. In conclusion, this study presents the strategies of bacterial arsenic removal with possible directions for future research.

Use of a triiodide resin for isolation of axenic cultures of microalgal Nannochloropsis gaditana

Triiodide resin (TR) was used to generate axenic cultures of microalgae by employing the antibacterial capability of triiodide. A Nannochloropsis gaditana culture contaminated with bacteria was passed through a column filled with TR using the gravity flow. Based on analyses of flow cytometry and vital staining using a fluorescent dye SYTOX Green, three cycles of TR treatments remarkably reduced the number of viable bacteria but had little effects on the microalgae. This novel approach is a simple, rapid, and cost-effective method that can be used to isolate axenic cultures of microalgae.

Antimicrobial activity and cytotoxicity of nanofibrous mats immobilized with polysaccharides-rectorite based nanogels

Rectorite (REC)-encapsulated lysozyme (LY)-alginate (ALG) nanogels (NGs) were prepared by adding ALG-REC composites suspensions into LY solutions at the mass ratio of 1:2. The morphology of the NGs and the NGs-assembled nanofibrous mats were studied by transmission electron microscope and field emission scanning electron microscopy, respectively. The composition of NGs-immobilized nanofibrous mats was detected by X-ray photoelectron spectroscopy. The NGs-assembled nanofibrous mats with the addition of REC could enhance the inhibition against Escherichia coli and Staphylococcus aureus. Additionally, NGs-coated mats reduced the toxicity of cellulose mats on mouse lung fibroblasts using MTT assay. Besides, the addition of REC in the NGs improved the cell compatibility of NGs-assembled nanofibrous mats.

Antibacterial and hemostatic performance of chitosan–organic rectorite/alginate composite sponge

We fabricate a novel chitosan–OREC/SA composite sponge and study the antibacterial and hemostatic performances.

Reactive toughening of polyvinyl alcohol hydrogel and its wastewater treatment performance by immobilization of microorganisms

Toughened PVA hydrogel beads were prepared by co-crosslinking with glycerol, resulting in the formation of a uniform and dense network gel structure, and the tensile property and hydraulic impact resistance were efficiently improved.