Impact of nanoparticles on human and environment: review of toxicity factors, exposures, control strategies, and future prospects

Silver Nanoparticles Synthesized Using Eichhornia crassipes Extract from Yuriria Lagoon, and the Perspective for Application as Antimicrobial Agent

The antimicrobial effects of silver (Ag) ions and salts are well known. However, the antimicrobial effects, mechanism, and the cytotoxic activity in vitro of Ag nanoparticles (AgNP) has recently been validated. In this work, we report the green synthesis of AgNPs using the extract of Eichhornia crassipes as a reducing agent and evaluate its antimicrobial activity against Escherichia coli (ATCC-25922). The morphology, size, chemical composition, and inhibition properties of the nanoparticles as a function of the reduction time and temperature were analyzed. According to TEM imaging, nanoparticles with average diameters between 20–40 nm were synthesized. Antibacterial results suggest that AgNPs can be used as an effective growth inhibitor with higher antimicrobial activity against Escherichia coli after 120 min of reaction with a synthesis temperature of 95°. More extensive analysis is required for the appropriate selection of the synthesis parameters and adequate concentration for use in biomedical applications and antibacterial control systems.

Emerging trends of nanotechnology in advanced cosmetics

The cosmetic industry is dynamic and ever-evolving. Especially with the introduction and incorporation of nanotechnology-based approaches into cosmetics for evincing novel formulations that confers aesthetic as well as therapeutic benefits. Nanocosmetics acts via numerous delivery mechanisms which involves lipid nanocarrier systems, polymeric or metallic nanoparticles, nanocapsules, dendrimers, nanosponges,etc. Each of these, have particular characteristic properties, which facilitates increased drug loading, enhanced absorption, better cosmetic efficacy, and many more. This article discusses the different classes of nanotechnology-based cosmetics and the nanomaterials used for their formulation, followed by outlining the categories of nanocosmetics and the scope of their utility pertaining to skin, hair, nail, lip, and/or dental care and protection thereof. This review also highlights and discusses about the key drivers of the cosmetic industry and the impending need of corroborating a healthy regulatory framework, refocusing attention towards consumer needs and trends, inculcating sustainable techniques and tenets of green ecological principles, and lastly making strides in nano-technological advancements which will further propel the growth of the cosmetic industry.

Cytotoxicity Assessment of Surface-Modified Magnesium Hydroxide Nanoparticles

Magnesium-based nanoparticles have shown promise in regenerative therapies in orthopedics and the cardiovascular system. Here, we set out to assess the influence of differently functionalized Mg nanoparticles on the cellular players of wound healing, the first step in the process of tissue regeneration. First, we thoroughly addressed the physicochemical characteristics of magnesium hydroxide nanoparticles, which exhibited low colloidal stability and strong aggregation in cell culture media. To address this matter, magnesium hydroxide nanoparticles underwent surface functionalization by 3-aminopropyltriethoxysilane (APTES), resulting in excellent dispersible properties in ethanol and improved colloidal stability in physiological media. The latter was determined as a concentration- and time-dependent phenomenon. There were no significant effects on THP-1 macrophage viability up to 1.500 μg/mL APTES-coated magnesium hydroxide nanoparticles. Accordingly, increased media pH and Mg²⁺ concentration, the nanoparticles dissociation products, had no adverse effects on their viability and morphology. HDF, ASCs, and PK84 exhibited the highest, and HUVECs, HPMECs, and THP-1 cells the lowest resistance toward nanoparticle toxic effects. In conclusion, the indicated high magnesium hydroxide nanoparticles biocompatibility suggests them a potential drug delivery vehicle for treating diseases like fibrosis or cancer. If delivered in a targeted manner, cytotoxic nanoparticles could be considered a potential localized and specific prevention strategy for treating highly prevalent diseases like fibrosis or cancer. Looking toward the possible clinical applications, accurate interpretation of in vitro cellular responses is the keystone for the relevant prediction of subsequent in vivo biological effects.

Safe-and-Sustainable-by-Design Framework Based on a Prospective Life Cycle Assessment: Lessons Learned from a Nano-Titanium Dioxide Case Study

Safe-and-sustainable-by-design (SSbD) is a concept that takes a systems approach by integrating safety, sustainability, and functionality throughout a product's the life cycle. This paper proposes a framework based on a prospective life cycle assessment for early safety and sustainability assessment. The framework's purpose is to identify environmental sustainability and toxicity hotspots early in the innovation process for future SSbD applicability. If this is impossible, key performance indicators are assessed. Environmental sustainability aspects, such as global warming potential (GWP) and cumulative energy demand (CED), and toxicity aspects, such as human toxicity potential and freshwater ecotoxicity potential, were assessed upon applying the framework on a case study. The case study regarded using nano-titanium dioxide (P25-TiO2) or a modified nano-coated version (Cu2O-coated/P25-TiO2) as photocatalysts to produce hydrogen from water using sunlight. Although there was a decrease in environmental impact (GWP and CED), the modified nano-coated version had a relatively higher level of human toxicity and freshwater eco-toxicity. For the presented case study, SSbD alternatives need to be considered that improve the photocatalytic activity but are not toxic to the environment. This case study illustrates the importance of performing an early safety and environmental sustainability assessment to avoid the development of toxic alternatives.

Bioaccumulation and oxidative stress caused by aluminium nanoparticles and the integrated biomarker responses in the common carp (Cyprinus carpio)

The use of nanoparticles (NPs) in various industries has experienced significant growth due to the advantages they offer, so the increase in their use has generated the continuous discharge of these products in numerous water bodies, which can affect the organisms that inhabit them. Previous studies have shown that Al is capable of producing oxidative stress in aquatic organisms; however, so far the impact of AlNP on hydrobionts is limited. Therefore, the objective of this work was to determine the oxidative stress produced by AlNP in liver, gill and blood of Cyprinus carpio, as well as their bioconcentration factor (BCF) in various tissues. For this purpose, the organisms were exposed to 50 μg L^-1 AlNP for 12-96 h. Subsequently, the tissues were obtained and the activity of antioxidant enzymes, oxidative damage to lipids and proteins were determined, and the BCF was calculated for liver, brain, gill and muscle. The results showed alterations in the activity of antioxidant enzymes and increased levels of lipoperoxidation, hydroperoxides and oxidized proteins. When establishing the integrated biomarker response, it was observed that the liver is the most affected organ and these effects are related to the Al content in the tissue. Finally, it was observed that muscle and gills presented a higher BCF, compared to brain and liver. These findings show that AlNP are capable of generating oxidative stress in carp, affecting tissue function and accumulating, which represents an important risk for the health of fish such as common carp.

Biocompatible Nanomaterials in Food Science, Technology, and Nutrient Drug Delivery: Recent Developments and Applications

Nanomaterials exist as potential biocompatible materials in nature and are being synthesized to provide extraordinary characteristics in various food industry sectors. Synthesis of biocompatible nanomaterials requires modification in the shape, density, and size of nanomaterials. Biocompatible nanomaterials are synthesized to reduce toxicity, decrease adverse effects in the gastrointestinal tract, and enhance immune response. Nanomaterials can target organs and tissues. Nanomaterials are found to be effectively compatible by interacting with functional foods and nutraceuticals. Applications of these nanomaterials are novel strategies in food industries such as food safety, food processing, food quality, food packaging, and food labeling. Various functions like detection of toxins and pathogens; production of biocompatible packaging; enhancement in color, flavor, and aroma; processing edible film, and sensing authenticity of food product are being accomplished with no toxicity. This review provides a systematic study on the biocompatibility of nanomaterials. It highlights the synthesis of biocompatible nanomaterials and advanced functions of these nanomaterials in the production area, processing industry, safety improvement, quality control, edible packaging films, biocompatibility, current developments, legislations and regulations for Nano-products, health and safety concerns, toxicity and public perceptions for use of nanomaterials.

3D graphene-based adsorbents: Synthesis, proportional analysis and potential applications in oil elimination

The suitability and efficacy of three-dimensional (3D) graphene, including its derivatives, have garnered widespread attention towards the development of novel, sustainable materials with ecological amenability. This is especially relevant towards its utilization as adsorbents of wastewater contaminants, such as heavy metals, dyes, and oil, which could be majorly attributed to its noteworthy physicochemical features, particularly elevated chemical and mechanical robustness, advanced permeability, as well as large specific surface area. In this review, we emphasize on the adsorptive elimination of oil particles from contaminated water. Specifically, we assess and collate recent literature on the conceptualization and designing stages of 3D graphene-based adsorbents (3DGBAs) towards oil adsorption, including their applications in either batch or continuous modes. In addition, we analytically evaluate the adsorption mechanism, including sorption sites, physical properties, surface chemistry of 3DGBA and interactions between the adsorbent and adsorbate involving the adsorptive removal of oil, as well as numerous effects of adsorption conditions on the adsorption performance, i.e. pH, temperature, initial concentration of oil contaminants and adsorbent dosage. Furthermore, we focus on the equilibrium isotherms and kinetic studies, in order to comprehend the oil elimination procedures. Lastly, we designate encouraging avenues and recommendations for a perpetual research thrust, and outline the associated future prospects and perspectives.

Research progress in synthesis and biological application of quantum dots

Quantum dots are an excellent choice for biomedical applications due to their special optical properties and quantum confinement effects. This paper reviews the research and application progress of several quantum...

Nanomaterials, a New Challenge in the Workplace

Nanomaterials are a nanotechnological product of increasing importance given the possibilities they offer to improve quality of life and support sustainable development. Safe management of nanomaterials is needed to ensure that this emerging technology has the highest levels of acceptance among different interest groups, including workers. This chapter reviews the current state that presents the different stages of risk management applied to nanomaterials, including standardisation, regulation, risk assessment and risk control. Particularly, the chapter contextualizes the development of nanotechnologies at European level and analyses the scientific evidence available on the risks derived from nanomaterials use. Furthermore, it highlights the required conditions to encourage the responsible development of nanomaterials, as well as reflects on the lack of consensus in terms of approaches and frameworks that could facilitate standardisation adoption, regulatory enforcement and industry intervention concerning nanomaterials.

Trends in Chemical Wood Surface Improvements and Modifications: A Review of the Last Five Years

Increasing the use of wood in buildings is regarded by many as a key solution to tackle climate change. For this reason, a lot of research is carried out to develop new and innovative wood surface improvements and make wood more appealing through features such as increased durability, fire-retardancy, superhydrophobicity, and self-healing. However, in order to have a positive impact on the society, these surface improvements must be applied in real buildings. In this review, the last five years of research in the domain of wood surface improvements and modifications is first presented by sorting the latest innovations into different trends. Afterward, these trends are correlated to specifications representing different normative, ecologic and economic factors which must be considered when expecting to introduce a wood treatment to the market. With this review, the authors hope to help researchers to take into consideration the different factors influencing whether new innovations can leave the research laboratory or not, and thereby facilitate the introduction of new wood surface treatments in the society.

Non-Clinical Investigation of Tuberculosis Drugs: Conjugated Norbornene- Based Nanocarriers Toxic Impacts on Zebrafish

INTRODUCTION:

Rifampicin conjugated (R-CP), and rifampicin -isoniazid dual conjugated (RI-CP) norbornene-derived nanocarriers are newly designed for pH stimuli-responsive delivery of tuberculosis (TB) drugs. Its biosafety level is yet to be well established.

OBJECTIVES:

To assess the impacts of the nanocarriers on liver cells using zebrafish animal model and human liver cell line model (HepG2).

METHODS:

Initially, lethal dose concentration for the norbornene-derived nanocarrier systems in zebrafish was determined. The toxic effects were analysed at the sub-lethal drug concentration by histopathological study, total GSH level, gene expression and DNA damage in zebrafish liver cells. Fish erythrocyte nuclear abnormalities were also evaluated. Cell viability and oxidative stress level (ROS generation) after exposure to the nanoconjugates was determined using HepG2 cell in the in vitro study.

RESULTS:

In vivo studies of both R-CP and RI-CP showed 100% mortality at 96 hours for exposure concentration >100mg/l and showed toxic changes in zebrafish liver histology, GSH, and DNA damage levels. A noticeable upregulated PXR, CYP3A and cyp2p6 genes was observed in RI-CP exposure than in RIF or R-CP molecules. The in vitro study revealed a dose-dependent effect on cell viability and ROS generation for RIF, R-CP and RI-CP exposures in HepG2 cells.

CONCLUSION:

The current study reports that the rifampicin conjugated (R-CP) and rifampicin-isoniazid conjugated (RI-CP) norbornene derived nanocarriers exhibit enhanced toxic responses in both adult zebrafish and HepG2 cells. The pH-sensitive norbornene derived nanocarriers on conjugation with different drugs exhibited varied impacts on hepatic cells. Hence the present investigation recommends a complete metabolomics analysis and norbornene carrier-drug interaction study to be performed for each drug conjugated norbornene nanocarrier to ensure its biosafety.

Mechanisms of Cell Entry by dsRNA Viruses: Insights for Efficient Delivery of dsRNA and Tools for Improved RNAi-Based Pest Control

While RNAi is often heralded as a promising new strategy for insect pest control, a major obstacle that still remains is the efficient delivery of dsRNA molecules within the cells of the targeted insects. However, it seems overlooked that dsRNA viruses already have developed efficient strategies for transport of dsRNA molecules across tissue barriers and cellular membranes. Besides protecting their dsRNA genomes in a protective shell, dsRNA viruses also display outer capsid layers that incorporate sophisticated mechanisms to disrupt the plasma membrane layer and to translocate core particles (with linear dsRNA genome fragments) within the cytoplasm. Because of the perceived efficiency of the translocation mechanism, it is well worth analyzing in detail the molecular processes that are used to achieve this feat. In this review, the mechanism of cell entry by dsRNA viruses belonging to the Reoviridae family is discussed in detail. Because of the large amount of progress in mammalian versus insect models, the mechanism of infections of reoviruses in mammals (orthoreoviruses, rotaviruses, orbiviruses) will be treated as a point of reference against which infections of reoviruses in insects (orbiviruses in midges, plant viruses in hemipterans, insect-specific cypoviruses in lepidopterans) will be compared. The goal of this discussion is to uncover the basic principles by which dsRNA viruses cross tissue barriers and translocate their cargo to the cellular cytoplasm; such knowledge subsequently can be incorporated into the design of dsRNA virus-based viral-like particles for optimal delivery of RNAi triggers in targeted insect pests.

In search for potential biomarkers of copper stress in aquatic plants

Over the last few decades, the use of pesticides and discharge of industrial and domestic wastewater on water surfaces have increased. Especially, Copper (Cu) pollution in aquatic ecosystems could constitute a major health problem, not only for flora and fauna but also for humans. To cope with this challenge, environmental monitoring studies have sought to find Cu-specific biomarkers in terrestrial and aquatic flora and/or fauna. This review discusses the toxic effects caused by Cu on the growth and development of plants, with a special focus on aquatic plants. While copper is considered as an essential metal involved in vital mechanisms for plants, when in excess it becomes toxic and causes alterations on biomarkers: biochemical (oxidative stress, pigment content, phytochelatins, polyamines), physiological (photosynthesis, respiration, osmotic potential), and morphological. In addition, Cu has a detrimental effect on DNA and hormonal balance. An overview of Cu toxicity and detoxification in plants is provided, along with information regarding Cu bioaccumulation and transport. Awareness of the potential use of these reactions as specific biomarkers for copper contamination has indeed become essential.

Recent Advances in Covalent Organic Frameworks for Heavy Metal Removal Applications

Covalent organic frameworks comprise a unique class of functional materials that has recently emerged as a versatile tool for energy-related, photocatalytic, environmental, and electrochromic device applications. A plethora of structures can be designed and implemented through a careful selection of ligands and functional units. On the other hand, porous materials for heavy metal absorption are constantly on the forefront of materials science due to the significant health issues that arise from the release of the latter to aquatic environments. In this critical review, we provide insights on the correlation between the structure of functional covalent organic frameworks and their heavy metal absorption. The elements we selected were Pb, Hg, Cr, Cd, and As metal ions, as well as radioactive elements, and we focused on their removal with functional networks. Finally, we outline their advantages and disadvantages compared to other competitive systems such as zeolites and metal organic frameworks (MOFs), we analyze the potential drawbacks for industrial scale applications, and we provide our outlook on the future of this emerging field.

Combine effect of exposure to petrol, kerosene and diesel fumes: On hepatic oxidative stress and haematological function in rats

Petroleum product fumes (PPFs) containing toxic organic components are pervasive in the environment, emanating from anthropogenic activities, including petroleum exploration and utilization by end-user activities from petrol-gasoline stations. Petrol station attendants are exposed to PPF through inhalation and dermal contact with consequent toxicological implications. We investigated the effects of chronic exposure (60 and 90 days) to petrol (P), kerosene (K) and diesel (D) alone and combined exposure to petrol, kerosene and diesel (PKD) fumes on hepatotoxicity, haematological function and oxidative stress in rats. Following sacrifice, we evaluated hepatic damage biomarkers, blood glucose, oxidative stress and haematological function. Chronic exposure to PPF significantly increased organo-somatic indices, blood glucose, biomarkers of hepatic toxicity and oxidative stress in an exposure duration-dependent manner. There was a simultaneous decrease in the protective capacity of antioxidants. Furthermore, exposure to PPF increased pro-inflammatory biomarkers in rats (90 > 60 days). Regardless of exposure duration, plateletcrit, mean platelet volume, platelet distribution width and red cell distribution width in the coefficient of variation increased, whereas red blood cell count, haemoglobin, packed cell volume, mean corpuscular volume, mean corpuscular haemoglobin, mean corpuscular haemoglobin concentration, white blood cell, lymphocyte, monocyte-basophil-eosinophil mixed counts and platelet count decreased after 60 and 90 days exposure. Microscopic examination of the liver demonstrated hepatic pathological changes paralleling the duration of exposure to PKD fumes. However, the injury observed was lesser to that of rats treated with the diethylnitrosamine - positive control. Our results expanded previous findings and further demonstrated the probable adverse effect on populations' health occasioned by persistent exposure to PPF. Individuals chronically exposed by occupation to PPF may be at greater risk of developing disorders promoted by continuous oxido-inflammatory perturbation and suboptimal haematological-immunologic function - thereby enabling a permissive environment for pathogenesis notwithstanding the limitation of quantifying PPF absolute values in our model system.

Nanotechnology in cosmetics pros and cons

The field of nanotechnology is being greatly explored by cosmetic industries in order to improve the efficacy of cosmetic products. The increased use of nanomaterials in the field of cosmetics can have two sides as health-related benefits and detrimental effects. This review mainly seeks the pros and cons of the use of nanomaterials in cosmetics along with some examples of nanomaterials that are widely used in cosmetic industries along with different types of nanotechnology-based cosmetic products. The benefits of nanomaterials in cosmetic formulations are huge. Moreover the study regarding the toxic effects on the health also equally matters. This review gives a brief outline of the advantages as well as disadvantages of nanotechnology in cosmetics.

Toxicity assessment of synthesized titanium dioxide nanoparticles in fresh water algae Chlorella pyrenoidosa and a zebrafish liver cell line

This study aims to assess the toxicity of the commonly-spread titanium dioxide nanoparticles (TiO₂ NPs) by evaluating the exposure impact of the particles on both freshwater algae Chlorella pyrenoidosa and zebrafish liver cell line (ZFL), the two common in vitro models in toxicological studies. To compare the toxic effects of TiO₂ NPs with different physiochemical properties, three types of manufactured TiO₂ were used: bulk TiO₂, Degussa P25 TiO₂, and ultrafine TiO₂ NPs. Both short and long-term biological responses of green algae, such as the effect on the cell growth rate, pigment autofluorescence, and esterase activity were investigated. The dosage, physical property of TiO₂ particles, and their interactions with algal cells affect cellular growth, especially after short-term exposure. The hydrodynamic size plays a critical role in determining the acute toxicity to C. pyrenoidosa in terms of autofluorescence and esterase activity, while all types of TiO₂ NPs show toxic effects after exposure for 14 days. However, this observation is not seen when studying the effect of introduced particles in ZFL, for the precipitated Degussa P25 TiO₂ showed the highest cellular inhibition. Interestingly, despite the obvious overall toxicity toward C. pyrenoidosa, the photocatalytical properties of TiO₂ NPs may contribute to the enhanced photosynthesis in the low concentration range (<40 µg mL^-1). Overall, we found that the physical interactions between TiO₂ particles and the cells, particles' size and dispersibility play critical role in the cytotoxic effect for both algal and ZFL cells, while the photocatalytical properties of TiO₂ particles may produce mixed effects on the cytotoxicity of green algae.

Nanomaterials in the environment, human exposure pathway, and health effects: A review

Nanomaterials (NMs), both natural and synthetic, are produced, transformed, and exported into our environment daily. Natural NMs annual flux to the environment is around 97% of the total and is significantly higher than synthetic NMs. However, synthetic NMs are considered to have a detrimental effect on the environment. The extensive usage of synthetic NMs in different fields, including chemical, engineering, electronics, and medicine, makes them susceptible to be discharged into the atmosphere, various water sources, soil, and landfill waste. As ever-larger quantities of NMs end up in our environment and start interacting with the biota, it is crucial to understand their behavior under various environmental conditions, their exposure pathway, and their health effects on human beings. This review paper comprises a large portion of the latest research on NMs and the environment. The article describes the natural and synthetic NMs, covering both incidental and engineered NMs and their behavior in the natural environment. The review includes a brief discussion on sampling strategies and various analytical tools to study NMs in complex environmental matrices. The interaction of NMs in natural environments and their pathway to human exposure has been summarized. The potential of NMs to impact human health has been elaborated. The nanotoxicological effect of NMs based on their inherent properties concerning to human health is also reviewed. The knowledge gaps and future research needs on NMs are reported. The findings in this paper will be a resource for researchers working on NMs all over the world to understand better the challenges associated with NMs in the natural environment and their human health effects.

Perspectives of Nanoparticles in Male Infertility: Evidence for Induced Abnormalities in Sperm Production

Advancement in the field of nanotechnology has prompted the need to elucidate the deleterious effects of nanoparticles (NPs) on reproductive health. Many studies have reported on the health safety issues related to NPs by investigating their exposure routes, deposition and toxic effects on different primary and secondary organs but few studies have focused on NPs’ deposition in reproductive organs. Noteworthy, even fewer studies have dealt with the toxic effects of NPs on reproductive indices and sperm parameters (such as sperm number, motility and morphology) by evaluating, for instance, the histopathology of seminiferous tubules and testosterone levels. To date, the research suggests that NPs can easily cross the blood testes barrier and, after accumulation in the testis, induce adverse effects on spermatogenesis. This review aims to summarize the available literature on the risks induced by NPs on the male reproductive system.

Highly efficient removal of silver nanoparticles by sponge-like hierarchically porous thiourea-formaldehyde resin from Water

With the increasing production and rapid market penetration as well as the confirmation of the toxic effects, silver nanoparticles (AgNPs) are one kind of newly emerging environmental contaminants of high concern. It is urgent to develop the efficient method to remove them from the environment. In this study, the sponge-like hierarchically porous thiourea-formaldehyde (TF) resin rich with nitrogen and sulfur was for the first time proposed as the adsorbent to achieve this goal. With enormous interconnected layer structure and plentiful macropores, the porous TF resin provided abundant available interaction sites and fast mass transfer to adsorb citrate stabilized AgNPs (citrate-AgNPs). Fast adsorption rate and high adsorption capacity (2478 mg/g) were obtained based on the electrostatic and metal-ligand interactions. Heterogeneous aggregation and simultaneous adsorption contributed to this removal process. Furthermore, with the assistance of NaCl, the porous TF resin exhibited largely enhanced removal efficiency towards citrate-AgNPs up to 98.7 % in 5 min, possibly due to the co-operation of adsorption and coagulation. This study proposed a promising adsorbent to remove AgNPs and provided a referential strategy to design highly efficient adsorbents for removal of nanoparticles.

Magnetic hybrid materials interact with biological matrices

Magnetic hybrid materials are a promising group of substances. Their interaction with matrices is challenging with regard to the underlying physical and chemical mechanisms. But thinking matrices as biological membranes or even structured cell layers they become interesting with regard to potential biomedical applications. Therefore, we established in vitro blood-organ barrier models to study the interaction and processing of superparamagnetic iron oxide nanoparticles (SPIONs) with these cellular structures in the presence of a magnetic field gradient. A one-cell-type–based blood-brain barrier model was used to investigate the attachment and uptake mechanisms of differentially charged magnetic hybrid materials. Inhibition of clathrin-dependent endocytosis and F-actin depolymerization led to a dramatic reduction of cellular uptake. Furthermore, the subsequent transportation of SPIONs through the barrier and the ability to detect these particles was of interest. Negatively charged SPIONs could be detected behind the barrier as well as in a reporter cell line. These observations could be confirmed with a two-cell-type–based blood-placenta barrier model. While positively charged SPIONs heavily interact with the apical cell layer, neutrally charged SPIONs showed a retarded interaction behavior. Behind the blood-placenta barrier, negatively charged SPIONs could be clearly detected. Finally, the transfer of the in vitro blood-placenta model in a microfluidic biochip allows the integration of shear stress into the system. Even without particle accumulation in a magnetic field gradient, the negatively charged SPIONs were detectable behind the barrier. In conclusion, in vitro blood-organ barrier models allow the broad investigation of magnetic hybrid materials with regard to biocompatibility, cell interaction, and transfer through cell layers on their way to biomedical application.

Impact of an Engineered Copper-Titanium Dioxide Nanocomposite and Parent Substrates on the Bacteria Viability, Antioxidant Enzymes and Fatty Acid Profiling

Due to the systematic increase in the production of nanomaterials (NMs) and their applications in many areas of life, issues associated with their toxicity are inevitable. In particular, the performance of heterogeneous NMs, such as nanocomposites (NCs), is unpredictable as they may inherit the properties of their individual components. Therefore, the purpose of this work was to assess the biological activity of newly synthesized Cu/TiO2-NC and the parent nanoparticle substrates Cu-NPs and TiO2-NPs on the bacterial viability, antioxidant potential and fatty acid composition of the reference Escherichia coli and Bacillus subtilis strains. Based on the toxicological parameters, it was found that B. subtilis was more sensitive to NMs than E. coli. Furthermore, Cu/TiO2-NC and Cu-NPs had an opposite effect on both strains, while TiO2-NPs had a comparable mode of action. Simultaneously, the tested strains exhibited varied responses of the antioxidant enzymes after exposure to the NMs, with Cu-NPs having the strongest impact on their activity. The most considerable alternations in the fatty acid profiles were found after the bacteria were exposed to Cu/TiO2-NC and Cu-NPs. Microscopic images indicated distinct interactions of the NMs with the bacterial outer layers, especially in regard to B. subtilis. Cu/TiO2-NC generally proved to have less distinctive antimicrobial properties on B. subtilis than E. coli compared to its parent components. Presumably, the biocidal effects of the tested NMs can be attributed to the induction of oxidative stress, the release of metal ions and specific electrochemical interactions with the bacterial cells.

Metal Homeostasis and Gas Exchange Dynamics in Pisum sativum L. Exposed to Cerium Oxide Nanoparticles

Cerium dioxide nanoparticles are pollutants of emerging concern. They are rarely immobilized in the environment. This study extends our work on Pisum sativum L. as a model plant, cultivated worldwide, and is well suited for investigating additive interactions induced by nanoceria. Hydroponic cultivation, which prompts accurate plant growth control and three levels of CeO2 supplementation, were applied, namely, 100, 200, and 500 mg (Ce)/L. Phytotoxicity was estimated by fresh weights and photosynthesis parameters. Additionally, Ce, Cu, Zn, Mn, Fe, Ca, and Mg contents were analyzed by high-resolution continuum source atomic absorption and inductively coupled plasma optical emission techniques. Analysis of variance has proved that CeO2 nanoparticles affected metals uptake. In the roots, it decreased for Cu, Zn, Mn, Fe, and Mg, while a reversed process was observed for Ca. The latter is absorbed more intensively, but translocation to above-ground parts is hampered. At the same time, nanoparticulate CeO2 reduced Cu, Zn, Mn, Fe, and Ca accumulation in pea shoots. The lowest Ce concentration boosted the photosynthesis rate, while the remaining treatments did not induce significant changes. Plant growth stimulation was observed only for the 100 mg/L. To our knowledge, this is the first study that demonstrates the effect of nanoceria on photosynthesis-related parameters in peas.

Toxicity of copper oxide nanoparticles: a review study

Copper oxide nanoparticles (CuO NPs) use has exponentially increased in various applications (such as industrial catalyst, gas sensors, electronic materials, biomedicines, environmental remediation) due to their flexible properties, i.e. large surface area to volume ratio. These broad applications, however, have increased human exposure and thus the potential risk related to their short- and long-term toxicity. Their release in environment has drawn considerable attention which has become an eminent area of research and development. To understand the toxicological impact of CuO NPs, this review summarises the in-vitro and in-vivo toxicity of CuO NPs subjected to species (bacterial, algae, fish, rats, human cell lines) used for toxicological hazard assessment. The key factors that influence the toxicity of CuO NPs such as particle shape, size, surface functionalisation, time-dose interaction and animal and cell models are elaborated. The literature evidences that the CuO NPs exposure to the living systems results in reactive oxygen species generation, oxidative stress, inflammation, cytotoxicity, genotoxicity and immunotoxicity. However, the physio-chemical characteristics of CuO NPs, concentration, mode of exposure, animal model and assessment characteristics are the main perspectives that define toxicology of CuO NPs.

Fates of Au, Ag, ZnO, and CeO2 Nanoparticles in Simulated Gastric Fluid Studied using Single-Particle-Inductively Coupled Plasma-Mass Spectrometry

The increasing use of engineered nanoparticles (ENPs) in many industries has generated significant research interest regarding their impact on the environment and human health. The major routes of ENPs to enter the human body are inhalation, skin contact, and ingestion. Following ingestion, ENPs have a long contact time in the human stomach. Hence, it is essential to know the fate of the ENPs under gastric conditions. This study aims to investigate the fate of the widely used nanoparticles Ag-NP, Au-NP, CeO2-NP, and ZnO-NP in simulated gastric fluid (SGF) under different conditions through the application of single-particle inductively coupled plasma-mass spectrometry (SP-ICP-MS). The resulting analytical methods have size detection limits for Ag-NP, Au-NP, ZnO-NP, and CeO2-NP from 15 to 35 nm, and the particle concentration detection limit is 135 particles/mL. Metal ions corresponding to the ENPs of interest were detected simultaneously with detection limits from 0.02 to 0.1 μg/L. The results showed that ZnO-NPs dissolved completely and rapidly in SGF, whereas Au-NPs and CeO2-NPs showed apparent aggregation and did not dissolve significantly. Both aggregation and dissolution were observed in Ag-NP samples following exposure to SGF. The size distributions and concentrations of ENPs were affected by the original ENP concentration, ENP size, the contact time in SGF, and temperature. This work represents a significant advancement in the understanding of ENP characteristics under gastric conditions.

Simulation of nanoparticle transport and adsorption in a microfluidic lung-on-a-chip device

The effect of air-borne nanoparticles (NPs) on human health is an active area of research, with clinical relevance evidenced by the current COVID-19 pandemic. As in vitro models for such studies, lung-on-a-chip (LOAC) devices can represent key physical and physiological aspects of alveolar tissues. However, widespread adoption of the LOAC device for NP testing has been hampered by low intra-laboratory and inter-laboratory reproducibility. To complement ongoing experimental work, we carried out finite-element simulations of the deposition of NPs on the epithelial layer of a well-established LOAC design. We solved the Navier-Stokes equations for the fluid flow in a three-dimensional domain and studied the particle transport using Eulerian advection-diffusion for fine NPs and Lagrangian particle tracking for coarse NPs. Using Langmuir and Frumkin kinetics for surface adsorption and desorption, we investigated NP adsorption under different exercise and breath-holding patterns. Conditions mimicking physical exercise, through changes in air-flow volume and breathing frequency, enhance particle deposition. Puff profiles typical of smoking, with breath-holding between inhalation and exhalation, also increase particle deposition per breathing cycle. Lagrangian particle tracking shows Brownian motion and gravitational settling to be two key factors, which may cooperate or compete with each other for different particle sizes. Comparisons are made with experimental data where possible and they show qualitative and semi-quantitative agreement. These results suggest that computer simulations can potentially inform and accelerate the design and application of LOAC devices for analyzing particulate- and microbe-alveolar interactions.

Nanotoxicity: a challenge for future medicine

Background/aim

Due to nanomaterials’ potential benefits for diagnosis and treatment, they are widely used in medical applications and personal care products. Interaction of nanomaterials, which are very small in size, with tissue, cell and microenvironment, can reveal harmful effects that cannot be created with chemically identical and larger counterparts in biological organisms. In this review, a challenge for future medicine, nanotoxicity of nanomaterials is discussed.

Materials and methods

A detailed review of related literature was performed and evaluated as per medical applications of nanomaterials their toxicity.

Results and conclusion

Most authors state “the only valid technology will be nanotechnology in the next era”; however, there is no consensus on the impact of this technology on humankind, environment and ecological balance. Studies dealing with the toxic effect of nanomaterials on human health have also varied with developing technology. Nanotoxicology studies such as in vivo-like on 3D human organs, cells, advanced genetic studies, and -omic approaches begin to replace conventional methods. Nanotoxicity and adverse effects of nanomaterials in exposed producers, industry workers, and patients make nanomaterials a double-edged sword for future medicine. In order to control and tackle related risks, regulation and legislations should be implemented, and researchers have to conduct joint multidisciplinary studies in various fields of medical sciences, nanotechnology, nanomedicine, and biomedical engineering.

Silicon and plant growth promoting rhizobacteria differentially regulate AgNP-induced toxicity in Brassica juncea: Implication of nitric oxide

An emerging stress of nanomaterials in soil and water is of great concern as it limits crop productivity and affects humans as well. Therefore, it is required to manage this problem. Silicon and plant growth promoting rhizobacteria has gained the engaging role in agriculture as (bio-)fertilizers. However, their role against silver nanoparticles (AgNPs) is still not known. Hence, present study was envisaged to investigate role of Si, PGPR and phytohormone indole acetic acid (IAA) in regulating AgNP stress in Brassica juncea seedlings. The study highlighted the impact of various treatments with respect to overproduction of reactive oxygen species, signaling molecule nitric oxide, oxidative markers like antioxidant enzymes and nonenzymatic components of ascorbate-glutathione pathway. Interestingly, silicon when present with AgNPs enhanced toxicity by reducing growth and mechanistic properties of B. juncea. Moreover, the results highlight the role of PGPR and IAA towards reduction in toxicity by promoting the plant growth under stressed conditions. Treatments AgNP + Si + PGPR/IAA were observed to significantly reduce the stress and enhance plant growth against treatment AgNPs alone. This reversal in toxicity by PGPR and IAA along with Si suggests the idea to formulate and utilize their combination as biofertilizers for eradicating the stress in near future.

Characterization of Silver Nanoparticles Obtained by a Green Route and Their Evaluation in the Bacterium of Pseudomonas aeruginosa

Metal nanoparticles are widely used in different areas such as biotechnology and biomedicine, for example in drug delivery, imaging and control of bacterial growth. The antimicrobial effect of silver has been identified as an alternative approach to the increasing bacterial resistance to antibiotics. Silver nanoparticles were synthesized by the green route using the Geranium extract as a reducing agent. The characterization was carried out by the techniques of UV-Vis spectrophotometry, transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), X-ray emitted photoelectron spectroscopy (XPS) and X-ray diffraction. Nanoparticle diameters between 15 and 50 nm were obtained and the interplanar spaces calculated from the electron diffraction pattern corresponding to a mixture of silver with 4H and FCC structures. To determine the minimum inhibitory concentration of silver nanoparticles (AgNPs) on the Pseudomonas aeruginosa bacteria (ATCC-27853), different concentrations of colloidal solution 0.36, 0.18, 0.09 and 0.05 μg/mL were evaluated as a function of the incubation time, measuring the inhibition halo and colony forming unit (CFU) during 0, 2 and 4 h of incubation. The minimum inhibitory AgNPs concentration (MIC) is 0.36 μg/mL at 0 h while the concentration of 0.18 μg/mL presents a total inhibition of the bacterium after 2 h. For the rest of the dilutions, gradual inhibitions as a function of time were observed. We evaluate the antibacterial effect of silver nanoparticles obtained by a green methodology in Pseudomonas aeruginosa bacteria. Finally, the colloidal nanoparticle solution can be an antibacterial alternative for different biomedical approaches.

Iron-Doping of Copper Oxide Nanoparticles Lowers Their Toxic Potential on C6 Glioma Cells

Copper oxide nanoparticles (CuO-NPs) are well known for their cytotoxicity which in part has been attributed to the release of copper ions from CuO-NPs. As iron-doping has been reported to reduce the susceptibility of CuO-NPs to dissolution, we have compared pure CuO-NPs and CuO-NPs that had been doped with 10% iron (CuO-Fe-NPs) for copper release and for their toxic potential on C6 glioma cells. Physicochemical characterization revealed that dimercaptosuccinate (DMSA)-coated CuO-NPs and CuO-Fe-NPs did not differ in their size or zeta potential. However, the redox activity and liberation of copper ions from CuO-Fe-NPs was substantially slower compared to that from CuO-NPs, as demonstrated by cyclic voltammetry and by the photometric quantification of the copper ion-bathocuproine complex, respectively. Exposure of C6 cells to these NPs caused an almost identical cellular copper accumulation and each of the two types of NPs induced ROS production and cell toxicity. However, the time- and concentration-dependent loss in cell viability was more severe for cells that had been treated with CuO-NPs compared to cells exposed to CuO-Fe-NPs. Copper accumulation and toxicity after exposure to either CuO-NPs or CuO-Fe-NPs was prevented in the presence of copper chelators, while neutralization of the lysosomal pH by bafilomycin A1 prevented toxicity without affecting cellular copper accumulation or ROS production. These data demonstrate that iron-doping does not affect cellular accumulation of CuO-NPs and suggests that the intracellular liberation of copper ions from CuO-NPs is slowed by the iron doping, which in turn lowers the cell toxic potential of iron-doped CuO-NPs.

Antibacterial activity of a glass ionomer cement doped with copper nanoparticles

Copper nanoparticles (NCu) were synthetized and added to commercial glass ionomer cement, to evaluate in vitro its antibacterial activity against oral cavity strains. The NCu were synthesized by copper acetate reduction with L-ascorbic acid and characterized by FTIR, Raman, XPS, XRD and TEM. Then, commercial glass ionomer cement (GIC) was modified (MGIC) with various concentrations of NCu and physicochemically characterized. Cell viability was tested against human dental pulp fibroblasts (HDPFs) by Alamar-Blue assay and antibacterial test was performed against S. mutans and S. sanguinis by colony forming unit (CFU) growth method. Synthesized NCu rendered a mixture of both metallic copper and cuprous oxide (Cu₂O). HDPF viability reduces with exposure time to the extracts (68-72% viability) and MGIC with 2-4 wt% NCu showed antimicrobial activity against the two tested strains.

Metal-based engineered nanoparticles in the drinking water treatment systems: A critical review

The emergence of nanotechnologically-enabled materials, compounds or products inevitably leads to engineered nanoparticles (ENPs) released into surface waters. ENPs have already been detected in wastewater streams, drinking water sources and even in tap water at concentrations in the ng/L and μg/L range, making the latter a potential route for humans. The presence of ENPs in raw waters raises concerns over the possibility that ENPs might pose a hazard to the quality and security of drinking water and whether drinking water treatment plants (DWTPs) are prepared to handle this problem. Therefore, it is essential to critically evaluate if ENPs can be effectively removed through water treatment processes to control environmental and human health risks associated with their release. This review includes a summary of the available information on production, presence, potential hazards to human health and environment, and release and behaviour of metal-based ENPs in surface waters and drinking water. In addition, the most extensively studied water treatment processes to remove metal-based ENPs, specifically conventional and advanced processes, are discussed and highlighted in detail. Furthermore, this work identifies the research gaps regarding ENPs removal in DWTPs and discusses future aspects of ENPs in water treatment.

Recent Developments in Nanotechnology for Detection and Control of Aedes aegypti-Borne Diseases

Arboviruses such as yellow fever, dengue, chikungunya and zika are transmitted mainly by the mosquito vector Aedes aegypti. Especially in the tropics, inefficacy of mosquito control causes arboviruses outbreaks every year, affecting the general population with debilitating effects in infected individuals. Several strategies have been tried to control the proliferation of A. aegypti using physical, biological, and chemical control measures. Other methods are currently under research and development, amongst which the use of nanotechnology has attracted a lot of attention of the researchers in relation to the production of more effective repellents and larvicides with less toxicity, and development of rapid sensors for the detection of virus infections. In this review, the utilization of nano-based formulations on control and diagnosis of mosquito-borne diseases were discussed. We also emphasizes the need for future research for broad commercialization of nano-based formulations in world market aiming a positive impact on public health.

Functional Nanomaterials for the Detection and Control of Bacterial Infections

Infections with multidrug-resistant bacteria that are difficult to treat with commonly used antibiotics have spread globally, raising serious public health concerns. Conventional bacterial detection techniques are time-consuming, which may delay treatment for critically ill patients past the optimal time. There is an urgent need for rapid and sensitive diagnosis and effective treatments for multidrug-resistant pathogenic bacterial infections. Advances in nanotechnology have made it possible to design and build nanomaterials with therapeutic and diagnostic capabilities. Functional nanomaterials that can specifically interact with bacteria offer additional options for the diagnosis and treatment of infections due to their unique physical and chemical properties. Here, we summarize the recent advances related to the preparation of nanomaterials and their applications for the detection and treatment of bacterial infection. We pay particular attention to the toxicity of therapeutic nanoparticles based on both in vitro and in vivo assays. In addition, the major challenges that require further research and future perspectives are briefly discussed.

Molecular and Cellular Risk Assessment of Healthy Human Cells and Cancer Human Cells Exposed to Nanoparticles

Nanodrugs have in recent years been a subject of great debate. In 2017 alone, almost 50 nanodrugs were approved for clinical use worldwide. Despite the advantages related to nanodrugs/nanomedicine, there is still a lack of information regarding the biological safety, as the real behavior of these nanodrugs in the body. In order to better understand these aspects, in this study, we evaluated the effect of polylactic acid (PLA) nanoparticles (NPs) and magnetic core mesoporous silica nanoparticles (MMSN), of 1000 nm and 50 nm, respectively, on human cells. In this direction we evaluated the cell cycle, cytochemistry, proliferation and tubulogenesis on tumor cells lines: from melanoma (MV3), breast cancer (MCF-7, MDA-MB-213), glioma (U373MG), prostate (PC3), gastric (AGS) and colon adenocarcinoma (HT-29) and non-tumor cell lines: from human melanocyte (NGM), fibroblast (FGH) and endothelial (HUVEC), respectively. The data showed that an acute exposure to both, polymeric nanoparticles or MMSN, did not show any relevant toxic effects on neither tumor cells nor non-tumor cells, suggesting that although nanodrugs may present unrevealed aspects, under acute exposition to human cells they are harmless.

Modulation of secondary metabolite profiles by biologically synthesized MgO/perlite nanocomposites in Melissa officinalis plant organ cultures

In this work, biological synthesis of MgO/perlite nanocomposites (NCs) besides their effects on morphology and secondary metabolite profiles of Melissa officinalis plant organ cultures were evaluated. MgO NPs were immobilized on the surface of nanoperlite using M. officinalis extract as a capping agent. The as-synthesized MgO/perlite NCs were characterized by using FTIR, XRD, SEM, EDS and DLS. The average particle size of nanoperlite and MgO/perlite NCs was about 10 and 30 nm, respectively. Morphological observations showed that nanoperlite and MgO/perlite NCs had no effect on root number, as well as root and shoot length. None of the applied concentrations of perlite and MgO/perlite NCs could significantly increase the growth parameters in comparison to the control, except for 150 mg/L of nanoperlite which caused an increase in the shoot number. Although, the contents of chlorophyll and carotenoids were not affected, the maximum content of volatile compounds obtained at 100 of MgO/perlite NCs. Rosmarinic acid was detected in shoots, which treated with 25-100 mg/L of perlite and 25, 50 and 150 mg/L of MgO/perlite NCs. Our results provided the evidence that nanoperlite and MgO/perlite NCs at specific levels may act as a novel elicitor for in vitro biosynthesis of valuable secondary metabolites.

Joint effects of zinc oxide nanoparticles and chlorpyrifos on the reproduction and cellular stress responses of the earthworm Eisenia andrei

The co-exposure of soil organisms to ZnO nanoparticles (ZnO NPs) and pesticides is likely to take place in agricultural soils. However, the impacts of co-exposure on terrestrial ecosystems are virtually unknown. In this paper, Eisenia andrei was exposed for a 28-day period to serial concentrations of ZnO NPs and/or the organophosphate insecticide chlorpyrifos (CPF) in natural soil, and was evaluated for single and joint effects. Zn and CPF accumulation in earthworm tissue was also determined. In the single assay, ZnO NPs and CPF caused statistical significant effects on survival and growth, but mainly on reproduction. Significant reductions in fecundity and fertility were detected with EC50 values of 278 and 179 mg Zn/kg for ZnO NPs, and of 50.75 and 38.24 mg/kg for CPF, respectively. The most notable effect on biomarkers was the reduction in acetylcholinesterase (AChE) activity caused by CPF, which reflected the neurotoxicity of this compound. The results of the combined assay indicated that co-exposure to ZnO NPs and CPF increased adverse effects in E. andrei. According to the independent action model, the binary mixtures showed a synergism (a stronger effect than expected from single exposures) on earthworm reproduction, which became up to 84% higher than the theoretically predicted values. Zn, and especially CPF accumulation, were influenced by the co-exposure. These results underpin the need to consider the effects of mixtures of NPs and organic chemicals on soil to adequately make ecological risk assessments of NPs.

Free energy of adhesion of lipid bilayers on titania surfaces

The adhesion strength between a flexible membrane and a solid substrate (formally the free energy of adhesion per unit area) is difficult to determine experimentally, yet is a key parameter in determining the extent of the wrapping of a particle by the membrane. Here, we present molecular dynamics simulations designed to estimate this quantity between dimyristoylphosphatidylcholine (DMPC) bilayers and a range of low-energy titanium dioxide cleavage planes for both anatase and rutile polymorphs. The average adhesion strength across the cleavage planes for rutile and anatase is relatively weak ∼-2.0 ± 0.4 mN m^-1. However, rutile has two surfaces (100 and 101) displaying relatively strong adhesion (-4 mN m^-1), while anatase has only one (110). This suggests a slightly greater tendency for bilayers to wrap rutile particles compared to anatase particles but both would wrap less than amorphous silica. We also estimate the adsorption free energies of isolated DMPC lipids and find that only the rutile 101 surface shows significant adsorption. In addition, we estimate the adhesion enthalpies and infer that the entropic contribution to the adhesion free energy drives adhesion on the rutile surfaces and opposes adhesion on the anatase surfaces.