The enamel knot as a signaling center in the developing mouse tooth

From snapshots to movies: Understanding early tooth development in four dimensions

The developing tooth offers a model for the study of ectodermal appendage organogenesis. The signaling networks that regulate tooth development have been intensively investigated, but how cell biological responses to signaling pathways regulate dental morphogenesis remains an open question. The increasing use of ex vivo imaging techniques has enabled live tracking of cell behaviors over time in high resolution. While recent studies using these techniques have improved our understanding of tooth morphogenesis, important gaps remain that require additional investigation. In addition, some discrepancies have arisen between recent studies, and resolving these will advance our knowledge of tooth development. Developmental Dynamics 246:442-450, 2016. © 2017 Wiley Periodicals, Inc.

FGF2, FGF3 and FGF4 expression pattern during molars odontogenesis in Didelphis albiventris

Odontogenesis is guided by a complex signaling cascade in which several molecules, including FGF2-4, ensure all dental groups development and specificity. Most of the data on odontogenesis derives from rodents, which does not have all dental groups. Didelphis albiventris is an opossum with the closest dentition to humans, and the main odontogenesis stages occur when the newborns are in the pouch. In this study, D. albiventris postnatals were used to characterize the main stages of their molars development; and also to establish FGF2, FGF3 and FGF4 expression pattern. D. albiventris postnatals were processed for histological and indirect immunoperoxidase analysis of the tooth germs. Our results revealed similar dental structures between D. albiventris and mice. However, FGF2, FGF3 and FGF4 expression patterns were observed in a larger number of dental structures, suggesting broader functions for these molecules in this opossum species. The knowledge of the signaling that determinates odontogenesis in an animal model with complete dentition may contribute to the development of therapies for the replacement of lost teeth in humans. This study may also contribute to the implementation of D. albiventris as model for Developmental Biology studies.

Epiprofin Regulates Enamel Formation and Tooth Morphogenesis by Controlling Epithelial-Mesenchymal Interactions During Tooth Development

The synchronization of cell proliferation and cytodifferentiation between dental epithelial and mesenchymal cells is required for the morphogenesis of teeth with the correct functional shapes and optimum sizes. Epiprofin (Epfn), a transcription factor belonging to the Sp family, regulates dental epithelial cell proliferation and is essential for ameloblast and odontoblast differentiation. Epfn deficiency results in the lack of enamel and ironically the formation of extra teeth. We investigated the mechanism underlying the functions of Epfn in tooth development through the creation of transgenic mice expressing Epfn under the control of an epithelial cell-specific K5 promoter (K5-Epfn). We found that these K5-Epfn mice developed abnormally shaped incisors and molars and formed fewer molars in the mandible. Remarkably, ameloblasts differentiated ectopically and enamel was formed on the lingual side of the K5-Epfn incisors. By contrast, ameloblasts and enamel were found only on the labial side in wild-type mice, as Follistatin (Fst) expressed in the lingual side inhibits BMP4 signaling necessary for ameloblast differentiation. We showed that Epfn transfection into the dental epithelial cell line SF2 abrogated the inhibitory activity of Fst and promoted ameloblast differentiation of SF2 cells. We found that Epfn induced FGF9 in dental epithelial cells and this dental epithelial cell-derived FGF9 promoted dental mesenchymal cell proliferation via the FGF receptor 1c (FGFR1c). Taken together, these results suggest that Epfn preserves the balance between cell proliferation and cytodifferentiation in dental epithelial and mesenchymal cells during normal tooth development and morphogenesis. © 2016 American Society for Bone and Mineral Research.

Dental Tissue Engineering Research and Translational Approaches towards Clinical Application

Stem cell-based dental tissue regeneration is a new and exciting field that has the potential to transform the way that we practice dentistry. It is, however, imperative its clinical application is supported by solid basic and translational research. In this way, the full extent of the potential risks involved in the use of these technologies will be understood, and the means to prevent them will be discovered. Therefore, the aim of this chapter is to analyze the state-of-the-science with regard to dental pulp stem cell research in dental tissue engineering, the new developments in biomimetic scaffold materials customized for dental tissue applications, and to give a prospectus with respect to translational approaches of these research findings towards clinical application.

Progress in Bioengineered Whole Tooth Research: From Bench to Dental Patient Chair

Tooth loss is a significant health issue that affects the physiological and social aspects of everyday life. Missing teeth impair simple tasks of chewing and speaking, and can also contribute to reduced self-confidence. An emerging and exciting area of regenerative medicine based dental research focuses on the formation of bioengineered whole tooth replacement therapies that can provide both the function and sensory responsiveness of natural teeth. This area of research aims to enhance the quality of dental and oral health for those suffering from tooth loss. Current approaches use a combination of dental progenitor cells, scaffolds and growth factors to create biologically based replacement teeth to serve as improved alternatives to currently used artificial dental prosthetics. This article is an overview of current progress, challenges, and future clinical applications of bioengineered whole teeth.

Facioscapulohumeral muscular dystrophy (FSHD) region gene 1 (FRG1) expression and possible function in mouse tooth germ development

Abnormal expression of Facioscapulohumeral muscular dystrophy (FSHD) region gene 1 (FRG1) is involved in the pathogenesis of FSHD. FRG1 is also important for the normal muscular and vascular development. Our previous study showed that FRG1 is one of the highly expressed genes in the mandible on embryonic day 10.5 (E10.5) than on E12.0. In this study, we investigated the temporospatial expression pattern of FRG1 mRNA and protein during the development of the mouse lower first molar, and also evaluated the subcellular localization of the FRG1 protein in mouse dental epithelial (mDE6) cells. The FRG1 expression was identified in the dental epithelial and mesenchymal cells at the initiation and bud stages. It was detected in the inner enamel epithelium at the cap and early bell stages. At the late bell and root formation stages, these signals were detected in ameloblasts and odontoblasts during the formation of enamel and dentin matrices, respectively. The FRG1 protein was localized in the cytoplasm in the mouse tooth germ in vivo, while FRG1 was detected predominantly in the nucleus and faintly in the cytoplasm in mDE6 cells in vitro. In mDE6 cells treated with bone morphogenetic protein 4 (BMP4), the protein expression of FRG1 increased in cytoplasm, suggesting that FRG1 may translocate to the cytoplasm. These findings suggest that FRG1 is involved in the morphogenesis of the tooth germ, as well as in the formation of enamel and dentin matrices and that FRG1 may play a role in the odontogenesis in the mouse following BMP4 stimulation.

Foxi3 Deficiency Compromises Hair Follicle Stem Cell Specification and Activation

The hair follicle is an ideal system to study stem cell specification and homeostasis due to its well characterized morphogenesis and stereotypic cycles of stem cell activation upon each hair cycle to produce a new hair shaft. The adult hair follicle stem cell niche consists of two distinct populations, the bulge and the more activation-prone secondary hair germ (HG). Hair follicle stem cells are set aside during early stages of morphogenesis. This process is known to depend on the Sox9 transcription factor, but otherwise the establishment of the hair follicle stem cell niche is poorly understood. Here, we show that that mutation of Foxi3, a Forkhead family transcription factor mutated in several hairless dog breeds, compromises stem cell specification. Further, loss of Foxi3 impedes hair follicle downgrowth and progression of the hair cycle. Genome-wide profiling revealed a number of downstream effectors of Foxi3 including transcription factors with a recognized function in hair follicle stem cells such as Lhx2, Runx1, and Nfatc1, suggesting that the Foxi3 mutant phenotype results from simultaneous downregulation of several stem cell signature genes. We show that Foxi3 displays a highly dynamic expression pattern during hair morphogenesis and cycling, and identify Foxi3 as a novel secondary HG marker. Absence of Foxi3 results in poor hair regeneration upon hair plucking, and a sparse fur phenotype in unperturbed mice that exacerbates with age, caused by impaired secondary HG activation leading to progressive depletion of stem cells. Thus, Foxi3 regulates multiple aspects of hair follicle development and homeostasis. Stem Cells 2016;34:1896-1908.

Mutant GDF5 enhances ameloblast differentiation via accelerated BMP2-induced Smad1/5/8 phosphorylation

Bone morphogenetic proteins (BMPs) regulate hard tissue formation, including bone and tooth. Growth differentiation factor 5 (GDF5), a known BMP, is expressed in cartilage and regulates chondrogenesis, and mutations have been shown to cause osteoarthritis. Notably, GDF5 is also expressed in periodontal ligament tissue; however, its role during tooth development is unclear. Here, we used cell culture and in vivo analyses to determine the role of GDF5 during tooth development. GDF5 and its associated BMP receptors are expressed at the protein and mRNA levels during postnatal tooth development, particularly at a stage associated with enamel formation. Furthermore, whereas BMP2 was observed to induce evidently the differentiation of enamel-forming ameloblasts, excess GDF5 induce mildly this differentiation. A mouse model harbouring a mutation in GDF5 (W408R) showed enhanced enamel formation in both the incisors and molars, but not in the tooth roots. Overexpression of the W408R GDF5 mutant protein was shown to induce BMP2-mediated mRNA expression of enamel matrix proteins and downstream phosphorylation of Smad1/5/8. These results suggest that mutant GDF5 enhances ameloblast differentiation via accelerated BMP2-signalling.

An ancient dental gene set governs development and continuous regeneration of teeth in sharks

The evolution of oral teeth is considered a major contributor to the overall success of jawed vertebrates. This is especially apparent in cartilaginous fishes including sharks and rays, which develop elaborate arrays of highly specialized teeth, organized in rows and retain the capacity for life-long regeneration. Perpetual regeneration of oral teeth has been either lost or highly reduced in many other lineages including important developmental model species, so cartilaginous fishes are uniquely suited for deep comparative analyses of tooth development and regeneration. Additionally, sharks and rays can offer crucial insights into the characters of the dentition in the ancestor of all jawed vertebrates. Despite this, tooth development and regeneration in chondrichthyans is poorly understood and remains virtually uncharacterized from a developmental genetic standpoint. Using the emerging chondrichthyan model, the catshark (Scyliorhinus spp.), we characterized the expression of genes homologous to those known to be expressed during stages of early dental competence, tooth initiation, morphogenesis, and regeneration in bony vertebrates. We have found that expression patterns of several genes from Hh, Wnt/β-catenin, Bmp and Fgf signalling pathways indicate deep conservation over ~450 million years of tooth development and regeneration. We describe how these genes participate in the initial emergence of the shark dentition and how they are redeployed during regeneration of successive tooth generations. We suggest that at the dawn of the vertebrate lineage, teeth (i) were most likely continuously regenerative structures, and (ii) utilised a core set of genes from members of key developmental signalling pathways that were instrumental in creating a dental legacy redeployed throughout vertebrate evolution. These data lay the foundation for further experimental investigations utilizing the unique regenerative capacity of chondrichthyan models to answer evolutionary, developmental, and regenerative biological questions that are impossible to explore in classical models.

Tooth and scale morphogenesis in shark: an alternative process to the mammalian enamel knot system

BACKGROUND

The gene regulatory network involved in tooth morphogenesis has been extremely well described in mammals and its modeling has allowed predictions of variations in regulatory pathway that may have led to evolution of tooth shapes. However, very little is known outside of mammals to understand how this regulatory framework may also account for tooth shape evolution at the level of gnathostomes. In this work, we describe expression patterns and proliferation/apoptosis assays to uncover homologous regulatory pathways in the catshark Scyliorhinus canicula.

RESULTS

Because of their similar structural and developmental features, gene expression patterns were described over the four developmental stages of both tooth and scale buds in the catshark. These gene expression patterns differ from mouse tooth development, and discrepancies are also observed between tooth and scale development within the catshark. However, a similar nested expression of Shh and Fgf suggests similar signaling involved in morphogenesis of all structures, although apoptosis assays do not support a strictly equivalent enamel knot system in sharks. Similarities in the topology of gene expression pattern, including Bmp signaling pathway, suggest that mouse molar development is more similar to scale bud development in the catshark.

CONCLUSIONS

These results support the fact that no enamel knot, as described in mammalian teeth, can be described in the morphogenesis of shark teeth or scales. However, homologous signaling pathways are involved in growth and morphogenesis with variations in their respective expression patterns. We speculate that variations in this topology of expression are also a substrate for tooth shape evolution, notably in regulating the growth axis and symmetry of the developing structure.

Suppression of epithelial differentiation by Foxi3 is essential for molar crown patterning

Epithelial morphogenesis generates the shape of the tooth crown. This is driven by patterned differentiation of cells into enamel knots, root-forming cervical loops and enamel-forming ameloblasts. Enamel knots are signaling centers that define the positions of cusp tips in a tooth by instructing the adjacent epithelium to fold and proliferate. Here, we show that the forkhead-box transcription factor Foxi3 inhibits formation of enamel knots and cervical loops and thus the differentiation of dental epithelium in mice. Conditional deletion of Foxi3 (Foxi3 cKO) led to fusion of molars with abnormally patterned shallow cusps. Foxi3 was expressed in the epithelium, and its expression was reduced in the enamel knots and cervical loops and in ameloblasts. Bmp4, a known inducer of enamel knots and dental epithelial differentiation, downregulated Foxi3 in wild-type teeth. Using genome-wide gene expression profiling, we showed that in Foxi3 cKO there was an early upregulation of differentiation markers, such as p21, Fgf15 and Sfrp5. Different signaling pathway components that are normally restricted to the enamel knots were expanded in the epithelium, and Sostdc1, a marker of the intercuspal epithelium, was missing. These findings indicated that the activator-inhibitor balance regulating cusp patterning was disrupted in Foxi3 cKO. In addition, early molar bud morphogenesis and, in particular, formation of the suprabasal epithelial cell layer were impaired. We identified keratin 10 as a marker of suprabasal epithelial cells in teeth. Our results suggest that Foxi3 maintains dental epithelial cells in an undifferentiated state and thereby regulates multiple stages of tooth morphogenesis.

Activated WNT signaling in postnatal SOX2-positive dental stem cells can drive odontoma formation

In common with most mammals, humans form only two dentitions during their lifetime. Occasionally, supernumerary teeth develop in addition to the normal complement. Odontoma represent a small group of malformations containing calcified dental tissues of both epithelial and mesenchymal origin, with varying levels of organization, including tooth-like structures. The specific cell type responsible for the induction of odontoma, which retains the capacity to re-initiate de novo tooth development in postnatal tissues, is not known. Here we demonstrate that aberrant activation of WNT signaling by expression of a non-degradable form of β-catenin specifically in SOX2-positive postnatal dental epithelial stem cells is sufficient to generate odontoma containing multiple tooth-like structures complete with all dental tissue layers. Genetic lineage-tracing confirms that odontoma form in a similar manner to normal teeth, derived from both the mutation-sustaining epithelial stem cells and adjacent mesenchymal tissues. Activation of the WNT pathway in embryonic SOX2-positive progenitors results in ectopic expression of secreted signals that promote odontogenesis throughout the oral cavity. Significantly, the inductive potential of epithelial dental stem cells is retained in postnatal tissues, and up-regulation of WNT signaling specifically in these cells is sufficient to promote generation and growth of ectopic malformations faithfully resembling human odontoma.

Tooth germ invagination from cell-cell interaction: Working hypothesis on mechanical instability

In the early stage of tooth germ development, the bud of the dental epithelium is invaginated by the underlying mesenchyme, resulting in the formation of a cap-like folded shape. This bud-to-cap transition plays a critical role in determining the steric design of the tooth. The epithelial-mesenchymal interaction within a tooth germ is essential for mediating the bud-to-cap transition. Here, we present a theoretical model to describe the autonomous process of the morphological transition, in which we introduce mechanical interactions among cells. Based on our observations, we assumed that peripheral cells of the dental epithelium bound tightly to each other to form an elastic sheet, and mesenchymal cells that covered the tooth germ would restrict its growth. By considering the time-dependent growth of cells, we were able to numerically show that the epithelium within the tooth germ buckled spontaneously, which is reminiscent of the cap-stage form. The difference in growth rates between the peripheral and interior parts of the dental epithelium, together with the steric size of the tooth germ, were determining factors for the number of invaginations. Our theoretical results provide a new hypothesis to explain the histological features of the tooth germ.

The role of APCDD1 in epithelial rearrangement in tooth morphogenesis

Adenomatosis polyposis coli downregulated 1 (APCDD1), a negative regulator of Wnt signaling, was examined to understand detailed mechanisms underlying Wnt signaling tooth development. In situ hybridization showed that Apcdd1 was expressed in the condensed mesenchyme at the bud stage, and in the inner enamel epithelium (IEE), including enamel knot (EK) at the cap stage. In vitro organ cultivation by using Apcdd1 antisense oligodeoxynucleotides was performed at E13.5 for 2 days to define the developmental functions of APCDD1 during tooth development. Analysis of histogenesis and cellular events such as cell adhesion, proliferation, apoptosis and epithelial rearrangement after Apcdd1 knockdown showed altered morphogenesis of the tooth germ with decreased cell proliferation and altered localization of cell adhesion molecules. Actin filament staining and 1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate (DiI) labeling of IEE cells showed that Apcdd1 knockdown enhanced epithelial rearrangement in the IEE and EK. To understand the precise signaling regulations of Apcdd1, we evaluated the altered expression patterns of signaling molecules, related with Wnt and enamel knot signalings using RT-qPCR. Tooth germs at cap stage were transplanted into the kidney capsules and were allowed to develop into calcified teeth for 3 weeks. Apcdd1 knockdown increased the number of ectopic cusps on the mesial side of the tooth. Our results suggested that APCDD1 modulates the gene expression of Wnt- and EK-related signaling molecules at the cap stage of tooth development, and is involved in tooth cusp patterning by modulating the epithelial rearrangement in the IEE.

Sprouty gene dosage influences temporal-spatial dynamics of primary enamel knot formation

BACKGROUND

The mouse embryonic mandible comprises two types of tooth primordia in the cheek region: progressive tooth primordia of prospective functional teeth and rudimentary tooth primordia in premolar region - MS and R2. Mice lacking Sprouty genes develop supernumerary tooth in front of the lower M1 (first molar) primordium during embryogenesis. We focused on temporal-spatial dynamics of Sonic Hedgehog expression as a marker of early odontogenesis during supernumerary tooth development.

RESULTS

Using mouse embryos with different dosages of Spry2 and Spry4 genes, we showed that during the normal development of M1 in the mandible the sooner appearing Shh signaling domain of the R2 bud transiently coexisted with the later appearing Shh expression domain in the early M1 primordium. Both domains subsequently fused together to form the typical signaling center representing primary enamel knot (pEK) of M1 germ at embryonic day (E) 14.5. However, in embryos with lower Spry2;Spry4 gene dosages, we observed a non-fusion of original R2 and M1 Shh signaling domains with consequent formation of a supernumerary tooth primordium from the isolated R2 bud.

CONCLUSIONS

Our results bring new insight to the development of the first lower molar of mouse embryos and define simple tooth unit capable of individual development, as well as determine its influence on normal and abnormal development of the tooth row which reflect evolutionarily conserved tooth pattern. Our findings contribute significantly to existing knowledge about supernumerary tooth formation.

Hedgehog signaling regulates dental papilla formation and tooth size during zebrafish odontogenesis

BACKGROUND

Intercellular communication by the hedgehog cell signaling pathway is necessary for tooth development throughout the vertebrates, but it remains unclear which specific developmental signals control cell behavior at different stages of odontogenesis. To address this issue, we have manipulated hedgehog activity during zebrafish tooth development and visualized the results using confocal microscopy.

RESULTS

We first established that reporter lines for dlx2b, fli1, NF-κB, and prdm1a are markers for specific subsets of tooth germ tissues. We then blocked hedgehog signaling with cyclopamine and observed a reduction or elimination of the cranial neural crest derived dental papilla, which normally contains the cells that later give rise to dentin-producing odontoblasts. Upon further investigation, we observed that the dental papilla begins to form and then regresses in the absence of hedgehog signaling, through a mechanism unrelated to cell proliferation or apoptosis. We also found evidence of an isometric reduction in tooth size that correlates with the time of earliest hedgehog inhibition.

CONCLUSIONS

We hypothesize that these results reveal a previously uncharacterized function of hedgehog signaling during tooth morphogenesis, regulating the number of cells in the dental papilla and thereby controlling tooth size.

Augmented BMP signaling in the neural crest inhibits nasal cartilage morphogenesis by inducing p53-mediated apoptosis

Bone morphogenetic protein (BMP) signaling plays many roles in skull morphogenesis. We have previously reported that enhanced BMP signaling through the BMP type IA receptor (BMPR1A) in cranial neural crest cells causes craniosynostosis during postnatal development. Additionally, we observed that 55% of Bmpr1a mutant mice show neonatal lethality characterized by a distended gastrointestinal tract. Here, we show that severely affected mutants exhibit defective nasal cartilage, failure of fusion between the nasal septum and the secondary palate, and higher levels of phosphorylated SMAD1 and SMAD5 in the nasal tissue. TUNEL demonstrated an increase in apoptosis in both condensing mesenchymal tissues and cartilage of the nasal region in mutants. The levels of p53 (TRP53) tumor suppressor protein were also increased in the same tissue. Injection of pifithrin-α, a chemical inhibitor of p53, into pregnant mice prevented neonatal lethality while concomitantly reducing apoptosis in nasal cartilage primordia, suggesting that enhanced BMP signaling induces p53-mediated apoptosis in the nasal cartilage. The expression of Bax and caspase 3, downstream targets of p53, was increased in the mutants; however, the p53 expression level was unchanged. It has been reported that MDM2 interacts with p53 to promote degradation. We found that the amount of MDM2-p53 complex was decreased in all mutants, and the most severely affected mutants had the largest decrease. Our previous finding that the BMP signaling component SMAD1 prevents MDM2-mediated p53 degradation coupled with our new data indicate that augmented BMP signaling induces p53-mediated apoptosis by prevention of p53 degradation in developing nasal cartilage. Thus, an appropriate level of BMP signaling is required for proper craniofacial morphogenesis.

YAP regulates the expression of Hoxa1 and Hoxc13 in mouse and human oral and skin epithelial tissues

Yes-associated protein (YAP) is a Hippo signaling transcriptional coactivator that plays pivotal roles in stem cell proliferation, organ size control, and tumor development. The downstream targets of YAP have been shown to be highly context dependent. In this study, we used the embryonic mouse tooth germ as a tool to search for the downstream targets of YAP in ectoderm-derived tissues. Yap deficiency in the dental epithelium resulted in a small tooth germ with reduced epithelial cell proliferation. We compared the gene expression profiles of embryonic day 14.5 (E14.5) Yap conditional knockout and YAP transgenic mouse tooth germs using transcriptome sequencing (RNA-Seq) and further confirmed the differentially expressed genes using real-time PCR and in situ hybridization. We found that YAP regulates the expression of Hoxa1 and Hoxc13 in oral and dental epithelial tissues as well as in the epidermis of skin during embryonic and adult stages. Sphere formation assay suggested that Hoxa1 and Hoxc13 are functionally involved in YAP-regulated epithelial progenitor cell proliferation, and chromatin immunoprecipitation (ChIP) assay implies that YAP may regulate Hoxa1 and Hoxc13 expression through TEAD transcription factors. These results provide mechanistic insights into abnormal YAP activities in mice and humans.

Mechanical forces induce odontoblastic differentiation of mesenchymal stem cells on three-dimensional biomimetic scaffolds

The mechanical induction of cell differentiation is well known. However, the effect of mechanical compression on odontoblastic differentiation remains to be elucidated. Thus, we first determined the optimal conditions for the induction of human dental pulp stem cells (hDPSCs) into odontoblastic differentiation in response to mechanical compression of three-dimensional (3D) scaffolds with dentinal tubule-like pores. The odontoblastic differentiation was evaluated by gene expression and confocal laser microscopy. The optimal conditions, which were: cell density, 4.0 × 10⁵ cells/cm² ; compression magnitude, 19.6 kPa; and loading time, 9 h, significantly increased expression of the odontoblast-specific markers dentine sialophosphoprotein (DSPP) and enamelysin and enhanced the elongation of cellular processes into the pores of the membrane, a typical morphological feature of odontoblasts. In addition, upregulation of bone morphogenetic protein 7 (BMP7) and wingless-type MMTV integration site family member 10a (Wnt10a) was observed. Moreover, the phosphorylation levels of mitogen-activated protein kinases (MAPKs), extracellular signal-regulated kinase 1/2 (ERK1/2) and p38 were also enhanced by mechanical compression, indicating the involvement of the MAPK signalling pathway. It is noteworthy that human mesenchymal stem cells (MSCs) derived from bone marrow and amnion also differentiated into odontoblasts in response to the optimal mechanical compression, demonstrating the importance of the physical structure of the scaffold in odontoblastic differentiation. Thus, odontoblastic differentiation of hDPSCs is promoted by optimal mechanical compression through the MAPK signalling pathway and expression of the BMP7 and Wnt10a genes. The 3D biomimetic scaffolds with dentinal tubule-like pores were critical for the odontoblastic differentiation of MSCs induced by mechanical compression. Copyright © 2014 John Wiley & Sons, Ltd.

Hair curvature: a natural dialectic and review

Although hair forms (straight, curly, wavy, etc.) are present in apparently infinite variations, each fibre can be reduced to a finite sequence of tandem segments of just three types: straight, bent/curly, or twisted. Hair forms can thus be regarded as resulting from genetic pathways that induce, reverse or modulate these basic curvature modes. However, physical interconversions between twists and curls demonstrate that strict one-to-one correspondences between them and their genetic causes do not exist. Current hair-curvature theories do not distinguish between bending and twisting mechanisms. We here introduce a multiple papillary centres (MPC) model which is particularly suitable to explain twisting. The model combines previously known features of hair cross-sectional morphology with partially/completely separated dermal papillae within single follicles, and requires such papillae to induce differential growth rates of hair cortical material in their immediate neighbourhoods. The MPC model can further help to explain other, poorly understood, aspects of hair growth and morphology. Separate bending and twisting mechanisms would be preferentially affected at the major or minor ellipsoidal sides of fibres, respectively, and together they exhaust the possibilities for influencing hair-form phenotypes. As such they suggest dialectic for hair-curvature development. We define a natural-dialectic (ND) which could take advantage of speculative aspects of dialectic, but would verify its input data and results by experimental methods. We use this as a top-down approach to first define routes by which hair bending or twisting may be brought about and then review evidence in support of such routes. In particular we consider the wingless (Wnt) and mammalian target of rapamycin (mTOR) pathways as paradigm pathways for molecular hair bending and twisting mechanisms, respectively. In addition to the Wnt canonical pathway, the Wnt/Ca(2+) and planar cell polarity (PCP) pathways, and others, can explain many alternatives and specific variations of hair bending phenotypes. Mechanisms for hair papilla budding or its division by bisection or fission can explain MPC formation. Epithelial-to-mesenchymal (EMT) and mesenchymal-to-epithelial (MET) transitions, acting in collaboration with epithelial-mesenchymal communications are also considered as mechanisms affecting hair growth and its bending and twisting. These may be treated as sub-mechanisms of an overall development from neural-crest stem cell (NCSC) lineages to differentiated hair follicle (HF) cell types, thus providing a unified framework for hair growth and development.

YAP Overexpression Affects Tooth Morphogenesis and Enamel Knot Patterning

Teeth develop through distinct morphological stages. At the cap stage, a compactly clustered and concentrically arranged cell mass, the enamel knot, appears at the tip of the enamel organ. Cells in this knot express sets of key molecules, and as such have been proposed to act as a signaling center directing tooth morphogenesis and tooth cusp formation. YAP is a transcriptional co-activator of the Hippo signaling pathway that is essential for the proper regulation of organ growth. In this study, we analyzed the tooth phenotype in transgenic mice that overexpressed a constitutively active form of YAP in the dental epithelium. We found that overexpression of YAP resulted in deformed tooth morphogenesis with widened dental lamina. In addition, the enamel knot was mislocated to the upper portion of the enamel organ, where it remained devoid of proliferating cells and contained apoptotic cells with intense Edar transcripts and reduced E-cadherin expression. Interestingly, some signaling molecules, such as Shh, Fgf4, and Wnt10a, were not expressed in this mislocated enamel knot, but remained at the tip of the enamel organ. Analysis of these data suggests that the signaling center is induced by reciprocal epithelial-mesenchymal interactions, and its induction may be independent of the enamel knot.

Three-dimensional analysis of the early development of the dentition

Tooth development has attracted the attention of researchers since the 19th century. It became obvious even then that morphogenesis could not fully be appreciated from two-dimensional histological sections. Therefore, methods of three-dimensional (3D) reconstructions were employed to visualize the surface morphology of developing structures and to help appreciate the complexity of early tooth morphogenesis. The present review surveys the data provided by computer-aided 3D analyses to update classical knowledge of early odontogenesis in the laboratory mouse and in humans. 3D reconstructions have demonstrated that odontogenesis in the early stages is a complex process which also includes the development of rudimentary odontogenic structures with different fates. Their developmental, evolutionary, and pathological aspects are discussed. The combination of in situ hybridization and 3D reconstruction have demonstrated the temporo-spatial dynamics of the signalling centres that reflect transient existence of rudimentary tooth primordia at loci where teeth were present in ancestors. The rudiments can rescue their suppressed development and revitalize, and then their subsequent autonomous development can give rise to oral pathologies. This shows that tooth-forming potential in mammals can be greater than that observed from their functional dentitions. From this perspective, the mouse rudimentary tooth primordia represent a natural model to test possibilities of tooth regeneration.

Fine tuning of craniofacial morphology by distant-acting enhancers

The shape of the human face and skull is largely genetically determined. However, the genomic basis of craniofacial morphology is incompletely understood and hypothesized to involve protein-coding genes, as well as gene regulatory sequences. We used a combination of epigenomic profiling, in vivo characterization of candidate enhancer sequences in transgenic mice, and targeted deletion experiments to examine the role of distant-acting enhancers in craniofacial development. We identified complex regulatory landscapes consisting of enhancers that drive spatially complex developmental expression patterns. Analysis of mouse lines in which individual craniofacial enhancers had been deleted revealed significant alterations of craniofacial shape, demonstrating the functional importance of enhancers in defining face and skull morphology. These results demonstrate that enhancers are involved in craniofacial development and suggest that enhancer sequence variation contributes to the diversity of human facial morphology.

Geometric morphometric 3D shape analysis and covariation of human mandibular and maxillary first molars

Dental casts of 160 Greek subjects (80 males, 80 females) were scanned by a structured-light scanner. The upper and lower right first molar occlusal surface 3D meshes were processed using geometric morphometric methods. A total of 265 and 274 curve and surface sliding semilandmarks were placed on the upper and lower molar surfaces, respectively. Principal component analysis and partial least square analysis were performed to assess shape parameters. Molars tended to vary between an elongated and a more square form. The first two principal components (PCs), comprising almost 1/3 of molar shape variation, were related to mesiodistal-buccolingual ratios and relative cusp position. Distal cusps displayed the greatest shape variability. Molars of males were larger than those of females (2.8 and 3.2% for upper and lower molars respectively), but no shape dimorphism was observed. Upper and lower molar sizes were significantly correlated (r(2) = 0.689). Allometry was observed for both teeth. Larger lower molars were associated with shorter cusps, expansion of the distal cusp, and constriction of the mesial cusps (predicted variance 3.25%). Upper molars displayed weaker allometry (predicted variance 1.59%). Upper and lower molar shape covariation proved significant (RV = 17.26%, P < 0.0001). The main parameter of molar covariation in partial least square axis 1, contributing to 30% of total covariation, was cusp height, in contrast to the primary variability traits exhibited by PC1 and PC2. The aim of this study was to evaluate shape variation and covariation, including allometry and sexual dimorphism, of maxillary and mandibular first permanent molar occlusal surfaces.

Jaw growth in the absence of teeth: the developmental morphology of edentulous mandibles using the p63 mouse mutant

Mammalian tooth and jaw development must be coordinated well enough that these systems continue to function together properly throughout growth, thus optimizing an animal's survival and fitness, as well as a species' success. The persistent question is how teeth and jaws remain developmentally and functionally viable despite sometimes monumental evolutionary changes to tooth and jaw shape and size. Here we used the p63 mouse mutant to test the effect of tooth development - or the lack thereof - on normal mandible developmental morphology. Using 3D geometric morphometrics, we compared for the first time mandible shape among mice with normal tooth and jaw development against p63 double knock-out mice, with failed tooth development but apparently normal jaw development. Mandible shape differed statistically between toothless (p63(-/-) ) and toothed (p63(+/-) , p63(+/+) ) mice as early as embryonic day (E) 18. As expected, most of the shape difference in the p63(-/-) mandibles was due to underdeveloped alveolar bone related to arrested odontogenesis in these E18-aged mice. Mandible shape did not differ statistically between p63(+/-) and p63(+/+) adult mice, which showed normal tooth development. Our results support the idea of a gene regulatory network that is exclusive to the mandible and independent of the dentition. This study also underscores the biomechanical impact of the teeth on the developing alveolar bone. Importantly, this work shows quantitatively that the p63 mutant is an apt model with which to study mandible morphogenesis in isolation of odontogenesis to clarify developmental relationships between the teeth and jaws.

The dynamics of supernumerary tooth development are differentially regulated by Sprouty genes

In mice, a toothless diastema separates the single incisor from the three molars in each dental quadrant. In the prospective diastema of the embryo, small rudimentary buds are found that are presumed to be rudiments of suppressed teeth. A supernumerary tooth occurs in the diastema of adult mice carrying mutations in either Spry2 or Spry4. In the case of Spry2 mutants, the origin of the supernumerary tooth involves the revitalization of a rudimentary tooth bud (called R2), whereas its origin in the Spry4 mutants is not known. In addition to R2, another rudimentary primordium (called MS) arises more anteriorly in the prospective diastema. We investigated the participation of both rudiments (MS and R2) in supernumerary tooth development in Spry2 and Spry4 mutants by comparing morphogenesis, proliferation, apoptosis, size and Shh expression in the dental epithelium of MS and R2 rudiments. Increased proliferation and decreased apoptosis were found in MS and R2 at embryonic day (ED) 12.5 and 13.5 in Spry2(-/-) embryos. Apoptosis was also decreased in both rudiments in Spry4(-/-) embryos, but the proliferation was lower (similar to WT mice), and supernumerary tooth development was accelerated, exhibiting a cap stage by ED13.5. Compared to Spry2(-/-) mice, a high number of Spry4(-/-) supernumerary tooth primordia degenerated after ED13.5, resulting in a low percentage of supernumerary teeth in adults. We propose that Sprouty genes were implicated during evolution in reduction of the cheek teeth in Muridae, and their deletion can reveal ancestral stages of murine dental evolution.

Exploring the effects of gene dosage on mandible shape in mice as a model for studying the genetic basis of natural variation

Mandible shape in the mouse is a complex trait that is influenced by many genetic factors. However, little is known about the action of single genes on adult mandible shape so far, since most developmentally relevant genes are already required during embryogenesis, i.e., knockouts lead to embryonic death or severe deformations, before the mandible is fully formed. We employ here a geometric morphometric approach to identify subtle phenotypic differences caused by dosage effects of candidate genes. We use mouse strains with specific gene modifications (knockouts and knockins) to compare heterozygous animals with controls from the same stock, which is expected to be equivalent to a change of gene expression of the respective locus. Such differences in expression level are also likely to occur as part of the natural variation. We focus on Bmp pathway genes (Bmp4, its antagonist Noggin, and combinations of Bmp5-7 genotypes), but include also two other developmental control genes suspected to affect mandible development in some way (Egfr and Irf6). In addition, we study the effects of Hoxd13, as well as an extracellular matrix constituent (Col2a1). We find that subtle but significant shape differences are caused by differences in gene dosage of several of these genes. The changes seen for Bmp4 and Noggin are partially compatible with the action of these genes known from birds and fish. We find significant shape changes also for Hoxd13, although this gene has so far only been implicated in skeletal patterning processes of the limbs. Comparing the effect sizes of gene dosage changes to the variation found in natural populations of mice as well as quantitative trait loci (QTL) effects on mandible shape, we find that the effect sizes caused by gene dosage changes are at the lower end of the spectrum of natural variation, but larger than the average additive effects found in QTL studies. We conclude that studying gene dosage effects have the potential to provide new insights into aspects of craniofacial development, variation, and evolution.

Evc Regulates a Symmetrical Response to Shh Signaling in Molar Development

Tooth morphogenesis involves patterning through the activity of epithelial signaling centers that, among other molecules, secrete Sonic hedgehog (Shh). While it is known that Shh responding cells need intact primary cilia for signal transduction, the roles of individual cilia components for tooth morphogenesis are poorly understood. The clinical features of individuals with Ellis-van Creveld syndrome include various dental anomalies, and we show here that absence of the cilial protein Evc in mice causes various hypo- and hyperplasia defects during molar development. During first molar development, the response to Shh signaling is progressively lost in Evc-deficient embryos and, unexpectedly, the response consistently disappears in a buccal to lingual direction. The important role of Evc for establishing the buccal-lingual axis of the developing first molar is also supported by a displaced activity of the Wnt pathway in Evc mutants. The observed growth abnormalities eventually manifest in first molar microdontia, disruption of molar segmentation and symmetry, root fusions, and delayed differentiation. Analysis of our data indicates that both spatially and temporally disrupted activities of the Shh pathway are the primary cause for the variable dental anomalies seen in patients with Ellis-van Creveld syndrome or Weyers acrodental dysostosis.

Tooth patterning and evolution

Teeth are a good system for studying development and evolution. Tooth development is largely independent of the rest of the body and teeth can be grown in culture to attain almost normal morphology. Their development is not affected by the patterns of movement or sensorial perception in the embryo. Teeth are hard and easily preserved. Thus, there is plenty of easily accessible information about the patterns of morphological variation occurring between and within species. This review summarises recent work and describes how tooth development can be understood as the coupling between a reaction-diffusion system and differential growth produced by diffusible growth factors: which growth factors are involved, how they affect each other's expression and how they affect the spatial patterns of proliferation that lead to final morphology. There are some aspects of tooth development, however, that do not conform to some common assumptions in many reaction-diffusion models. Those are discussed here since they provide clues about how reaction-diffusion systems may work in actual developmental systems. Mathematical models implementing what we know about tooth development are discussed.

Identification of novel transcription-regulating genes expressed during murine molar development

BACKGROUND

The mechanism of tooth development is a complex process regulated by numerous genes including transcription factors, growth factors, and other intra- and extracellular molecules. Especially, transcription factors play a central role in gene expression, regulating a wide spectrum of biological processes including organogenesis. Substantial evidence has been demonstrated by a number of studies using genetically engineered animal models. However, detailed molecular mechanisms of tooth development have not been completely elucidated, partially because numerous genes that play essential roles in tooth development remain unidentified.

RESULTS

In this study, we conducted an expression-based screening using gene expression database and in situ hybridization assays. Based on the gene expression database "EMBRYS," 207 out of 1,520 genes were expressed in the maxillary and/or mandibular processes and thus were selected for further analysis by section in situ hybridization. Among these candidates, 28 genes were newly identified as potential factors associated with tooth development by in situ hybridization assays with frontal sections of embryonic day 13.5 and 14.5 mouse embryos. The expression patterns were also examined at embryonic day 16.5 and 18.5.

CONCLUSIONS

These results will contribute to elucidating the mechanisms of tooth development and to improving the technology for regeneration of tooth.

BCL11B regulates epithelial proliferation and asymmetric development of the mouse mandibular incisor

Mouse incisors grow continuously throughout life with enamel deposition uniquely on the outer, or labial, side of the tooth. Asymmetric enamel deposition is due to the presence of enamel-secreting ameloblasts exclusively within the labial epithelium of the incisor. We have previously shown that mice lacking the transcription factor BCL11B/CTIP2 (BCL11B hereafter) exhibit severely disrupted ameloblast formation in the developing incisor. We now report that BCL11B is a key factor controlling epithelial proliferation and overall developmental asymmetry of the mouse incisor: BCL11B is necessary for proliferation of the labial epithelium and development of the epithelial stem cell niche, which gives rise to ameloblasts; conversely, BCL11B suppresses epithelial proliferation, and development of stem cells and ameloblasts on the inner, or lingual, side of the incisor. This bidirectional action of BCL11B in the incisor epithelia appears responsible for the asymmetry of ameloblast localization in developing incisor. Underlying these spatio-specific functions of BCL11B in incisor development is the regulation of a large gene network comprised of genes encoding several members of the FGF and TGFβ superfamilies, Sprouty proteins, and Sonic hedgehog. Our data integrate BCL11B into these pathways during incisor development and reveal the molecular mechanisms that underlie phenotypes of both Bcl11b^−/− and Sprouty mutant mice.

Tissue engineering: from research to dental clinics

Tissue engineering is an interdisciplinary field that combines the principles of engineering, material and biological sciences toward the development of therapeutic strategies and biological substitutes that restore, maintain, replace or improve biological functions. The association of biomaterials, stem cells, growth and differentiation factors has yielded the development of new treatment opportunities in most of the biomedical areas, including Dentistry. The objective of this paper is to present the principles underlying tissue engineering and the current scenario, the challenges and the perspectives of this area in Dentistry.

SIGNIFICANCE

The growth of tissue engineering as a research field has provided a novel set of therapeutic strategies for biomedical applications. Indeed, tissue engineering may lead to new strategies for the clinical management of patients with dental and craniofacial needs in the future.

Specific inactivation of Twist1 in the mandibular arch neural crest cells affects the development of the ramus and reveals interactions with hand2

BACKGROUND

The basic helix-loop-helix (bHLH) transcription factor Twist1 fulfills an essential function in neural crest cell formation, migration, and survival and is associated with the craniosynostic Saethre-Chotzen syndrome in humans. However, its functions during mandibular development, when it may interact with other bHLH transcription factors like Hand2, are unknown because mice homozygous for the Twist1 null mutation die in early embryogenesis. To determine the role of Twist1 during mandibular development, we used the Hand2-Cre transgene to conditionally inactivate the gene in the neural crest cells populating the mandibular pharyngeal arch.

RESULTS

The mutant mice exhibited a spectrum of craniofacial anomalies, including mandibular hypoplasia, altered middle ear development, and cleft palate. It appears that Twist1 is essential for the survival of the neural crest cells involved in the development of the mandibular ramal elements. Twist1 plays a role in molar development and cusp formation by participating in the reciprocal signaling needed for the formation of the enamel knot. This gene is also needed to control the ossification of the mandible, a redundant role shared with Hand2.

CONCLUSION

Twist1, along with Hand2, is essential for the proximodistal patterning and development of the mandible and ossification.

Developmental stalling and organ-autonomous regulation of morphogenesis

Timing of organ development during embryogenesis is coordinated such that at birth, organ and fetal size and maturity are appropriately proportioned. The extent to which local developmental timers are integrated with each other and with the signaling interactions that regulate morphogenesis to achieve this end is not understood. Using the absolute requirement for a signaling pathway activity (bone morphogenetic protein, BMP) during a critical stage of tooth development, we show that suboptimal levels of BMP signaling do not lead to abnormal morphogenesis, as suggested by mutants affecting BMP signaling, but to a 24-h stalling of the intrinsic developmental clock of the tooth. During this time, BMP levels accumulate to reach critical levels whereupon tooth development restarts, accelerates to catch up with development of the rest of the embryo and completes normal morphogenesis. This suggests that individual organs can autonomously control their developmental timing to adjust their stage of development to that of other organs. We also find that although BMP signaling is critical for the bud-to-cap transition in all teeth, levels of BMP signaling are regulated differently in multicusped teeth. We identify an interaction between two homeodomain transcription factors, Barx1 and Msx1, which is responsible for setting critical levels of BMP activity in multicusped teeth and provides evidence that correlates the levels of Barx1 transcriptional activity with cuspal complexity. This study highlights the importance of absolute levels of signaling activity for development and illustrates remarkable self-regulation in organogenesis that ensures coordination of developmental processes such that timing is subordinate to developmental structure.