Cell adaptation to a physiologically relevant ECM mimic with different viscoelastic properties

The Effect of Matrix Stiffness on Human Hepatocyte Migration and Function-An In Vitro Research

The extracellular matrix (ECM) regulates cellular function through the dynamic biomechanical and biochemical interplay between the resident cells and their microenvironment. Pathologically stiff ECM promotes phenotype changes in hepatocytes during liver fibrosis. To investigate the effect of ECM stiffness on hepatocyte migration and function, we designed an easy fabricated polyvinyl alcohol (PVA) hydrogel in which stiffness can be controlled by changing the concentration of glutaraldehyde. Three stiffnesses of hydrogels corresponding to the health of liver tissue, early stage, and end stage of fibrosis were selected. These were 4.8 kPa (soft), 21 kPa (moderate), and 45 kPa (stiff). For hepatocytes attachment, the hydrogel was coated with fibronectin. To evaluate the optimal concentration of fibronectin, hydrogel was coated with 0.1 mg/mL, 0.01 mg/mL, 0.005 mg/mL, or 0.003 mg/mL fibronectin, and the migratory behavior of single hepatocyte cultured on different concentrations of fibronectin was analyzed. To further explore the effect of substrate stiffness on hepatocyte migration, we used a stiffness controllable commercial 3D collagen gel, which has similar substrate stiffness to that of PVA hydrogel. Our result confirmed the PVA hydrogel biocompatibility with high hepatocytes survival. Fibronectin (0.01 mg/mL) promoted optimal migratory behavior for single hepatocytes. However, for confluent hepatocytes, a stiff substrate promoted hepatocellular migration compared with the soft and moderate groups via enhancing the formation of actin- and tubulin-rich structures. The gene expression analysis and protein expression analysis showed that the stiff substrate altered the phenotype of hepatocytes and induced apoptosis. Hepatocytes in stiff 3D hydrogel showed a higher proportion of cell death and expression of filopodia.

Flow and deformation characteristics of a flexible microfluidic channel with axial gradients in wall elasticity

Axial gradients in wall elasticity may have significant implications in the deformation and flow characteristics of a narrow fluidic conduit, bearing far-reaching consequences in physiology and bio-engineering. Here, we present a theoretical and experimental framework for fluid-structure interactions in microfluidic channels with axial gradients in wall elasticity, in an effort to arrive at a potential conceptual foundation for in vitro study of mirovascular physiology. Towards this, we bring out the static deformation and steady flow characteristics of a circular microchannel made of polydimethylsiloxane (PDMS) bulk, considering imposed gradients in the substrate elasticity. In particular, we study two kinds of elasticity variations - a uniformly soft (or hard) channel with a central strip that is hard (or soft), and, increasing elasticity along the length of the channel. The former kind yields a centrally constricted (or expanded) deformed profile in response to the flow. The latter kind leads to increasingly bulged channel radius from inlet to outlet in response to flow. We also formulate an analytical model capturing the essential physics of the underlying elastohydrodynamic interactions. The theoretical predictions match favourably with the experimental observations and are also in line with reported results on stenosis in mice. The present framework, thus, holds the potential for acting as a fundamental design basis towards developing in vitro models for micro-circulation, capable of capturing exclusive artefacts of healthy and diseased conditions.

Extracellular Matrix Proteins and Substrate Stiffness Synergistically Regulate Vascular Smooth Muscle Cell Migration and Cortical Cytoskeleton Organization

Vascular smooth muscle cell (VSMC) migration is a critical step in the progression of cardiovascular disease and aging. Migrating VSMCs encounter a highly heterogeneous environment with the varying extracellular matrix (ECM) composition due to the differential synthesis of collagen and fibronectin (FN) in different regions and greatly changing stiffness, ranging from the soft necrotic core of plaques to hard calcifications within blood vessel walls. In this study, we demonstrate an application of a two-dimensional (2D) model consisting of an elastically tunable polyacrylamide gel of varying stiffness and ECM protein coating to study VSMC migration. This model mimics the in vivo microenvironment that VSMCs experience within a blood vessel wall, which may help identify potential therapeutic targets for the treatment of atherosclerosis. We found that substrate stiffness had differential effects on VSMC migration on type 1 collagen (COL1) and FN-coated substrates. VSMCs on COL1-coated substrates showed significantly diminished migration distance on stiffer substrates, while on FN-coated substrates VSMCs had significantly increased migration distance. In addition, cortical stress fiber orientation increased in VSMCs cultured on more rigid COL1-coated substrates, while decreasing on stiffer FN-coated substrates. On both proteins, a more disorganized cytoskeletal architecture was associated with faster migration. Overall, these results demonstrate that different ECM proteins can cause substrate stiffness to have differential effects on VSMC migration in the progression of cardiovascular diseases and aging.

S-protected thiolated hyaluronic acid: In-situ crosslinking hydrogels for 3D cell culture scaffold

The purpose of this study was to synthesize S-protected thiolated hyaluronic acid (HA) and to evaluate its potential for 3D cell culture scaffold. S-protected thiolated HA was synthesized by the covalent attachment of N-acetyl-S-((3-((2,5-dioxopyrrolidin-1-yl)oxy)-3-oxopropyl)thio)cysteine hydrazide ligand to the HA. Hydrogels were characterized for texture, swelling behavior and rheological properties. Furthermore, the potential of S-protected thiolated HA hydrogels as a scaffold for tissue engineering was evaluated by cell proliferation studies with Caco-2 and NIH 3T3 cells. It showed enhanced cohesion upon addition of N-acetyl cysteine (NAC). Dynamic viscosity of S-protected thiolated HA hydrogel was increased up to 19.5-fold by addition of NAC and 10.1-fold after mixing with mucus. Furthermore, Caco-2 and NIH 3T3 cells encapsulated into hydrogels proliferated in-vitro. As this novel S-protected thiolated HA is stable towards oxidation and forms highly cohesive gels when getting into contact with endogenous thiols due to disulfide-crosslinking, it is a promising tool for 3D cell culture scaffold.

Matrix stiffness-regulated cellular functions under different dimensionalities

The microenvironments that cells encounter with in vitro.

Identification of Cognitive and Social Framework of Tissue Engineering by Science Mapping Analysis

IMPACT STATEMENT

This study evaluates the cognitive structure and social behavior of tissue engineering (TE) based on a science mapping analysis. Understanding the terms and topics that play a key role in the development of TE can help administrative authorities to better plan funding. Moreover, a better knowledge of collaborative networks in TE and the identification of potential new opportunities for collaboration may enhance synergies in scientific activities to implement future approaches to therapy.

Regulation and Directing Stem Cell Fate by Tissue Engineering Functional Microenvironments: Scaffold Physical and Chemical Cues

It is well known that stem cells reside within tissue engineering functional microenvironments that physically localize them and direct their stem cell fate. Recent efforts in the development of more complex and engineered scaffold technologies, together with new understanding of stem cell behavior in vitro, have provided a new impetus to study regulation and directing stem cell fate. A variety of tissue engineering technologies have been developed to regulate the fate of stem cells. Traditional methods to change the fate of stem cells are adding growth factors or some signaling pathways. In recent years, many studies have revealed that the geometrical microenvironment played an essential role in regulating the fate of stem cells, and the physical factors of scaffolds including mechanical properties, pore sizes, porosity, surface stiffness, three-dimensional structures, and mechanical stimulation may affect the fate of stem cells. Chemical factors such as cell-adhesive ligands and exogenous growth factors would also regulate the fate of stem cells. Understanding how these physical and chemical cues affect the fate of stem cells is essential for building more complex and controlled scaffolds for directing stem cell fate.

A mechanical toy model linking cell-substrate adhesion to multiple cellular migratory responses

During cell migration, forces applied to a cell from its environment influence the motion. When the cell is placed on a substrate, such a force is provided by the cell-substrate adhesion. Modulation of adhesivity, often performed by the modulation of the substrate stiffness, tends to cause common responses for cell spreading, cell speed, persistence, and random motility coefficient. Although the reasons for the response of cell spreading and cell speed have been suggested, other responses are not well understood. In this study, we develop a simple toy model for cell migration driven by the relation of two forces: the adhesive force and the plasma membrane tension. The simplicity of the model allows us to perform the calculation not only numerically but also analytically, and the analysis provides formulas directly relating the adhesivity to cell spreading, persistence, and the random motility coefficient. Accordingly, the results offer a unified picture on the causal relations between those multiple cellular responses. In addition, cellular properties that would influence the migratory behavior are suggested.

Colloidal crystals of compliant microgel beads to study cell migration and mechanosensitivity in 3D

Tissues are defined not only by their biochemical composition, but also by their distinct mechanical properties. It is now widely accepted that cells sense their mechanical environment and respond to it. However, studying the effects of mechanics in in vitro 3D environments is challenging since current 3D hydrogel assays convolve mechanics with gel porosity and adhesion. Here, we present novel colloidal crystals as modular 3D scaffolds where these parameters are principally decoupled by using monodisperse, protein-coated PAAm microgel beads as building blocks, so that variable stiffness regions can be achieved within one 3D colloidal crystal. Characterization of the colloidal crystal and oxygen diffusion simulations suggested the suitability of the scaffold to support cell survival and growth. This was confirmed by live-cell imaging and fibroblast culture over a period of four days. Moreover, we demonstrate unambiguous durotactic fibroblast migration and mechanosensitive neurite outgrowth of dorsal root ganglion neurons in 3D. This modular approach of assembling 3D scaffolds from mechanically and biochemically well-defined building blocks allows the spatial patterning of stiffness decoupled from porosity and adhesion sites in principle and provides a platform to investigate mechanosensitivity in 3D environments approximating tissues in vitro.

Efficient inhibition of uveal melanoma via ternary siRNA complexes

Uveal melanoma (UM) is rare yet the most common and malignant primary intraocular tumor in adults. Due to the lack of effective treatment, the mortality rate of UM has remained high over the past few decades. In the present study, hyaluronic acid (HA) coated chitosan (Chi)/siRNA ternary complexes have been developed and characterized as a novel therapeutic strategy molecularly targeting hypoxia-inducible factor 1α (HIF-1α) pathway for the treatment of UM. The cytotoxicity, cellular uptake, and siRNA silencing effect of the developed siRNA complexes were evaluated. In addition, whether the developed ternary complexes can inhibit UM migration and invasion was investigated. Results showed that the developed ternary siRNA complexes were negatively charged and with a particle size below 190 nm. The ternary siRNA complexes showed excellent cellular uptake and lysosome escape ability with low cytotoxicity. In addition, the ternary complexes were able to downregulate both HIF-1α and VEGF expression in UM cells, and successfully inhibit UM migration and invasion. These results demonstrated that the biocompatible ternary siRNA complexes are promising for local treatment of UM in the posterior segment with future clinical application potential.

Stiffness Sensing by Cells

Physical stimuli are essential for the function of eukaryotic cells, and changes in physical signals are important elements in normal tissue development as well as in disease initiation and progression. The complexity of physical stimuli and the cellular signals they initiate are as complex as those triggered by chemical signals. One of the most important, and the focus of this review, is the effect of substrate mechanical properties on cell structure and function. The past decade has produced a nearly exponentially increasing number of mechanobiological studies to define how substrate stiffness alters cell biology using both purified systems and intact tissues. Here we attempt to identify common features of mechanosensing in different systems while also highlighting the numerous informative exceptions to what in early studies appeared to be simple rules by which cells respond to mechanical stresses.

Modeling distributed forces within cell adhesions of varying size on continuous substrates

Cell migration and traction are essential to many biological phenomena, and one of their key features is sensitivity to substrate stiffness, which biophysical models, such as the motor-clutch model and the cell migration simulator can predict and explain. However, these models have not accounted for the finite size of adhesions, the spatial distribution of forces within adhesions. Here, we derive an expression that relates varying adhesion radius ( R) and spatial distribution of force within an adhesion (described by s) to the effective substrate stiffness ( κ_sub ), as a function of the Young's modulus of the substrate ( E _Y ), which yields the relation, κ sub = R s E Y , for two-dimensional cell cultures. Experimentally, we found that a cone-shaped force distribution ( s = 1.05) can describe the observed displacements of hydrogels deformed by adherent U251 glioma cells. Also, we found that the experimentally observed adhesion radius increases linearly with the cell protrusion force, consistent with the predictions of the motor-clutch model with spatially distributed clutches. We also found that, theoretically, the influence of one protrusion on another through a continuous elastic environment is negligible. Overall, we conclude cells can potentially control their own interpretation of the mechanics of the environment by controlling adhesion size and spatial distribution of forces within an adhesion.

The Role of Cancer Stem Cells and Mechanical Forces in Ovarian Cancer Metastasis

Ovarian cancer is an extremely lethal gynecologic disease; with the high-grade serous subtype predominantly associated with poor survival rates. Lack of early diagnostic biomarkers and prevalence of post-treatment recurrence, present substantial challenges in treating ovarian cancers. These cancers are also characterized by a high degree of heterogeneity and protracted metastasis, further complicating treatment. Within the ovarian tumor microenvironment, cancer stem-like cells and mechanical stimuli are two underappreciated key elements that play a crucial role in facilitating these outcomes. In this review article, we highlight their roles in modulating ovarian cancer metastasis. Specifically, we outline the clinical relevance of cancer stem-like cells, and challenges associated with their identification and characterization and summarize the ways in which they modulate ovarian cancer metastasis. Further, we review the mechanical cues in the ovarian tumor microenvironment, including, tension, shear, compression and matrix stiffness, that influence (cancer stem-like cells and) metastasis in ovarian cancers. Lastly, we outline the challenges associated with probing these important modulators of ovarian cancer metastasis and provide suggestions for incorporating these cues in basic biology and translational research focused on metastasis. We conclude that future studies on ovarian cancer metastasis will benefit from the careful consideration of mechanical stimuli and cancer stem cells, ultimately allowing for the development of more effective therapies.

Toll-like receptor signaling in macrophages is regulated by extracellular substrate stiffness and Rho-associated coiled-coil kinase (ROCK1/2)

Macrophages participate in immunity, tissue repair and tissue homeostasis. Activation of Toll-like receptors (TLRs) by conserved exogenous or endogenous structures initiates signaling cascades that result in the release of cytokines such as tumor necrosis factor α (TNFα). Extracellular substrate stiffness is known to regulate functions of non-immune cells through a process called mechanotransduction, yet less is known about how physical cues affect macrophage function or TLR signaling. To investigate this question, we cultured murine primary bone marrow-derived macrophages (BMMs) and RAW264.7 cells on fibronectin-coated polyacrylamide (PA) gels of defined stiffnesses (1, 20 and 150 kPa) that approximate the physical properties of physiologic tissues. BMMs on all gels were smaller and more circular than those on rigid glass. Macrophages on intermediate stiffness 20 kPa PA gels were slightly larger and less circular than those on either 1 or 150 kPa. Secretion of the pro-inflammatory cytokine, TNFα, in response to stimulation of TLR4 and TLR9 was increased in macrophages grown on soft gels versus more rigid gels, particularly for BMMs. Inhibition of the rho-associated coiled-coil kinase 1/2 (ROCK1/2), key mediators in cell contractility and mechanotransduction, enhanced release of TNFα in response to stimulation of TLR4. ROCK1/2 inhibition enhanced phosphorylation of the TLR downstream signaling molecules, p38, ERK1/2 and NFκB. Our data indicate that physical cues from the extracellular environment regulate macrophage morphology and TLR signaling. These findings have important implications in the regulation of macrophage function in diseased tissues and offer a novel pharmacological target for the manipulation of macrophage function in vivo.

Fibronectin-derived Epiviosamines enhance PDGF-BB-stimulated human dermal fibroblast migration in vitro and granulation tissue formation in vivo

Fibronectin (FN) is a multimodular glycoprotein that is a critical component of the extracellular matrix (ECM) anlage during embryogenesis, morphogenesis, and wound repair. Our laboratory has previously described a family of FN-derived peptides collectively called "epiviosamines" that enhance platelet-derived growth factor-BB (PDGF-BB)-driven tissue cell survival, speed burn healing, and reduce scarring. In this study, we used an agarose drop outmigration assay to report that epiviosamines can enhance PDGF-BB-stimulated adult human dermal fibroblast (AHDF) outmigration in a dose-dependent manner. Furthermore, these peptides can, when delivered topically, stimulate granulation tissue formation in vivo. A thiol-derivatized hyaluronan hydrogel cross-linked with polyethyleneglycol diacrylate (PEGDA) was used to topically deliver a cyclized epiviosamine: cP12 and a cyclized engineered variant of cP12 termed cNP8 to porcine, full-thickness, excisional wounds. Both cP12 and cNP8 exhibited dose-dependent increases in granulation tissue formation at day 4, with 600 μM cNP8 significantly enhancing new granulation tissue compared to vehicle alone. In contrast to previous studies, this study suggests that epiviosamines can be used to increase granulation tissue formation without an exogenous supply of PDGF-BB or any cell-binding peptides. Thus, epiviosamine may be useful topically to increase granulation tissue formation in acute wounds.

Measurements on ATP induced cellular fluctuations using real-time dual view transport of intensity phase microscopy

Dual view transport of intensity phase microscopy is adopted to quantitatively study the regulation of adenosine triphosphate (ATP) on cellular mechanics. It extracts cell phases in real time from simultaneously captured under- and over-focus images. By computing the root-mean-square phase and correlation time, it is found that the cellular fluctuation amplitude and speed increased with ATP compared to those with ATP depletion. Besides, when adenylyl-imidodiphosphate (AMP-PNP) was introduced, it competed with ATP to bind to the ATP binding site, and the cellular fluctuation amplitude and speed decreased. The results prove that ATP is a factor in the regulation of cellular mechanics. To our best knowledge, it is the first time that the dual view transport of intensity phase microscopy was used for live cell phase imaging and analysis. Our work not only provides direct measurements on cellular fluctuations to study ATP regulation on cellular mechanics, but it also proves that our proposed dual view transport of intensity phase microscopy can be well used, especially in quantitative phase imaging of live cells in biological and medical applications.

Mechanical features of endothelium regulate cell adhesive molecule-induced calcium response in neutrophils

Atherosclerosis is caused by chronic inflammation associated with the adhesion of neutrophils and endothelial cells (ECs) that is mediated by their respective cellular adhesive molecules to stiffened blood vessel walls. However, the stiffness dependence of calcium flux on neutrophils remains unclear yet. Here, the effect of substrate stiffness by ECs on neutrophils' calcium spike was quantified when the individual neutrophils that adhered to the human umbilical vascular endothelial cell (HUVEC) monolayer were pre-placed onto a stiffness-varied polyacrylamide substrate (5 or 34.88 kPa) or glass surface. Our data indicated that E-/P-selectins and intercellular adhesion molecule 1 (ICAM-1) on HUVECs and β₂-integrins, P-selectin glycoprotein ligand 1 (PSGL-1), and CD44s on neutrophils were all involved in mediating neutrophil calcium spike in a stiffness-dependent manner, in which the increase in substrate stiffness enhanced the calcium intensity and the oscillation frequency (spike number). Such stiffness-dependent calcium response is associated with the induced selectin related to β₂-integrin activation through the Syk/Src signaling pathway, and F-actin/myosin II are also involved in this. Moreover, tension-activated calcium ion channels displayed critical roles in initiating stiffness-dependent calcium spike. These results provide an insight into understanding how the stiffening of vascular walls could regulate the calcium flux of adhered neutrophils, and thus the immune responses in atherosclerosis.

Incorporation of types I and III collagen in tunable hyaluronan hydrogels for vocal fold tissue engineering

Vocal fold scarring is the fibrotic manifestation of a variety of voice disorders, and is difficult to treat. Tissue engineering therapies provide a potential strategy to regenerate the native tissue microenvironment in order to restore vocal fold functionality. However, major challenges remain in capturing the complexity of the native tissue and sustaining regeneration. We hypothesized that hydrogels with tunable viscoelastic properties that present relevant biological cues to cells might be better suited as therapeutics. Herein, we characterized the response of human vocal fold fibroblasts to four different biomimetic hydrogels: thiolated hyaluronan (HA) crosslinked with poly(ethylene glycol) diacrylate (PEGDA), HA-PEGDA with type I collagen (HA-Col I), HA-PEGDA with type III collagen (HA-Col III) and HA-PEGDA with type I and III collagen (HA-Col I-Col III). Collagen incorporation allowed for interpenetrating fibrils of collagen within the non-fibrillar HA network, which increased the mechanical properties of the hydrogels. The addition of collagen fibrils also reduced hyaluronidase degradation of HA and hydrogel swelling ratio. Fibroblasts encapsulated in the HA-Col gels adopted a spindle shaped fibroblastic morphology by day 7 and exhibited extensive cytoskeletal networks by day 21, suggesting that the incorporation of collagen was essential for cell adhesion and spreading. Cells remained viable and synthesized new DNA throughout 21 days of culture. Gene expression levels significantly differed between the cells encapsulated in the different hydrogels. Relative fold changes in gene expression of MMP1, COL1A1, fibronectin and decorin suggest higher degrees of remodeling in HA-Col I-Col III gels in comparison to HA-Col I or HA-Col III hydrogels, suggesting that the former may better serve as a natural biomimetic hydrogel for tissue engineering applications. STATEMENT OF SIGNIFICANCE: Voice disorders affect about 1/3rd of the US population and significantly reduce quality of life. Patients with vocal fold fibrosis have few treatment options. Tissue engineering therapies provide a potential strategy to regenerate the native tissue microenvironment in order to restore vocal fold functionality. Various studies have used collagen or thiolated hyaluronan (HA) with gelatin as potential tissue engineering therapies. However, there is room for improvement in providing cells with more relevant biological cues that mimic the native tissue microenvironment and sustain regeneration. The present study introduces the use of type I collagen and type III collagen along with thiolated HA as a natural biomimetic hydrogel for vocal fold tissue engineering applications.

Elastomeric conductive hybrid hydrogels with continuous conductive networks

The DA–PPy–GP ECHs with continuous conductive networks show high force and strain sensitivity.

Matrix mechanical plasticity regulates cancer cell migration through confining microenvironments

Studies of cancer cell migration have found two modes: one that is protease-independent, requiring micron-sized pores or channels for cells to squeeze through, and one that is protease-dependent, relevant for confining nanoporous matrices such as basement membranes (BMs). However, many extracellular matrices exhibit viscoelasticity and mechanical plasticity, irreversibly deforming in response to force, so that pore size may be malleable. Here we report the impact of matrix plasticity on migration. We develop nanoporous and BM ligand-presenting interpenetrating network (IPN) hydrogels in which plasticity could be modulated independent of stiffness. Strikingly, cells in high plasticity IPNs carry out protease-independent migration through the IPNs. Mechanistically, cells in high plasticity IPNs extend invadopodia protrusions to mechanically and plastically open up micron-sized channels and then migrate through them. These findings uncover a new mode of protease-independent migration, in which cells can migrate through confining matrix if it exhibits sufficient mechanical plasticity.

Tunable cell-surface mimetics as engineered cell substrates

Most recent breakthroughs in understanding cell adhesion, cell migration, and cellular mechanosensitivity have been made possible by the development of engineered cell substrates of well-defined surface properties. Traditionally, these substrates mimic the extracellular matrix (ECM) environment by the use of ligand-functionalized polymeric gels of adjustable stiffness. However, such ECM mimetics are limited in their ability to replicate the rich dynamics found at cell-cell contacts. This review focuses on the application of cell surface mimetics, which are better suited for the analysis of cell adhesion, cell migration, and cellular mechanosensitivity across cell-cell interfaces. Functionalized supported lipid bilayer systems were first introduced as biomembrane-mimicking substrates to study processes of adhesion maturation during adhesion of functionalized vesicles (cell-free assay) and plated cells. However, while able to capture adhesion processes, the fluid lipid bilayer of such a relatively simple planar model membrane prevents adhering cells from transducing contractile forces to the underlying solid, making studies of cell migration and cellular mechanosensitivity largely impractical. Therefore, the main focus of this review is on polymer-tethered lipid bilayer architectures as biomembrane-mimicking cell substrate. Unlike supported lipid bilayers, these polymer-lipid composite materials enable the free assembly of linkers into linker clusters at cellular contacts without hindering cell spreading and migration and allow the controlled regulation of mechanical properties, enabling studies of cellular mechanosensitivity. The various polymer-tethered lipid bilayer architectures and their complementary properties as cell substrates are discussed.

Matrix elasticity regulates mesenchymal stem cell chemotaxis

Efficient homing of human mesenchymal stem cells (hMSCs) is likely to be dictated by a combination of physical and chemical factors present in the microenvironment. However, crosstalk between the physical and chemical cues remains incompletely understood. Here, we address this question by probing the efficiency of epidermal growth factor (EGF)-induced hMSC chemotaxis on substrates of varying stiffness (3, 30 and 600 kPa) inside a polydimethylsiloxane (PDMS) microfluidic device. Chemotactic speed was found to be the sum of a stiffness-dependent component and a chemokine concentration-dependent component. While the stiffness-dependent component scaled inversely with stiffness, the chemotactic component was independent of stiffness. Faster chemotaxis on the softest 3 kPa substrates is attributed to a combination of weaker adhesions and higher protrusion rate. While chemotaxis was mildly sensitive to contractility inhibitors, suppression of chemotaxis upon actin depolymerization demonstrates the role of actin-mediated protrusions in driving chemotaxis. In addition to highlighting the collective influence of physical and chemical cues in chemotactic migration, our results suggest that hMSC homing is more efficient on softer substrates.

Effects of Matrix Stiffness on the Morphology, Adhesion, Proliferation and Osteogenic Differentiation of Mesenchymal Stem Cells

BMMSCs have drawn great interest in tissue engineering and regenerative medicine attributable to their multi-lineage differentiation capacity. Increasing evidence has shown that the mechanical stiffness of extracellular matrix is a critical determinant for stem cell behaviors. However, it remains unknown how matrix stiffness influences MSCs commitment with changes in cell morphology, adhesion, proliferation, self-renewal and differentiation. We employed fibronectin coated polyacrylamide hydrogels with variable stiffnesses ranging from 13 to 68 kPa to modulate the mechanical environment of BMMSCs and found that the morphology and adhesion of BMMSCs were highly dependent on mechanical stiffness. Cells became more spread and more adhesive on substrates of higher stiffness. Similarly, the proliferation of BMMSCs increased as stiffness increased. Sox2 expression was lower during 4h to 1 week on the 13-16 kPa and 62-68 kPa, in contrast, it was higher during 4h to 1 week on the 48-53 kPa. Oct4 expression on 13-16 kPa was higher than 48-53 kPa at 4h, and it has no significant differences at other time point among three different stiffness groups. On 62-68 kPa, BMMSCs were able to be induced toward osteogenic phenotype and generated a markedly high level of RUNX2, ALP, and Osteopontin. The cells exhibited a polygonal morphology and larger spreading area. These results suggest that matrix stiffness modulates commitment of BMMSCs. Our findings may eventually aid in the development of novel, effective biomaterials for the applications in tissue engineering.

Morphological adaptations in breast cancer cells as a function of prolonged passaging on compliant substrates

Standard tissue culture practices involve propagating cells on tissue culture polystyrene (TCP) dishes, which are flat, 2-dimensional (2D) and orders of magnitude stiffer than most tissues in the body. Such simplified conditions lead to phenotypical cell changes and altered cell behaviors. Hence, much research has been focused on developing novel biomaterials and culture conditions that more closely emulate in vivo cell microenvironments. In particular, biomaterial stiffness has emerged as a key property that greatly affects cell behaviors such as adhesion, morphology, proliferation and motility among others. Here we ask whether cells that have been conditioned to TCP, would still show significant dependence on substrate stiffness if they are first pre-adapted to a more physiologically relevant environment. We used two commonly utilized breast cancer cell lines, namely MDA-MB-231 and MCF-7, and examined the effect of prolonged cell culturing on polyacrylamide substrates of varying compliance. We followed changes in cell adhesion, proliferation, shape factor, spreading area and spreading rate. After pre-adaptation, we noted diminished differences in cell behaviors when comparing between soft (1 kPa) and stiff (103 kPa) gels as well as rigid TCP control. Prolonged culturing of cells on complaint substrates further influenced responses of pre-adapted cells when transferred back to TCP. Our results have implications for the study of stiffness-dependent cell behaviors and indicate that cell pre-adaptation to the substrate needs consideration.

Manufacturing of hydrogel biomaterials with controlled mechanical properties for tissue engineering applications

Hydrogels have been recognized as crucial biomaterials in the field of tissue engineering, regenerative medicine, and drug delivery applications due to their specific characteristics. These biomaterials benefit from retaining a large amount of water, effective mass transfer, similarity to natural tissues and the ability to form different shapes. However, having relatively poor mechanical properties is a limiting factor associated with hydrogel biomaterials. Controlling the biomechanical properties of hydrogels is of paramount importance. In this work, firstly, mechanical characteristics of hydrogels and methods employed for characterizing these properties are explored. Subsequently, the most common approaches used for tuning mechanical properties of hydrogels including but are not limited to, interpenetrating polymer networks, nanocomposites, self-assembly techniques, and co-polymerization are discussed. The performance of different techniques used for tuning biomechanical properties of hydrogels is further compared. Such techniques involve lithography techniques for replication of tissues with complex mechanical profiles; microfluidic techniques applicable for generating gradients of mechanical properties in hydrogel biomaterials for engineering complex human tissues like intervertebral discs, osteochondral tissues, blood vessels and skin layers; and electrospinning techniques for synthesis of hybrid hydrogels and highly ordered fibers with tunable mechanical and biological properties. We finally discuss future perspectives and challenges for controlling biomimetic hydrogel materials possessing proper biomechanical properties.

STATEMENT OF SIGNIFICANCE

Hydrogels biomaterials are essential constituting components of engineered tissues with the applications in regenerative medicine and drug delivery. The mechanical properties of hydrogels play crucial roles in regulating the interactions between cells and extracellular matrix and directing the cells phenotype and genotype. Despite significant advances in developing methods and techniques with the ability of tuning the biomechanical properties of hydrogels, there are still challenges regarding the synthesis of hydrogels with complex mechanical profiles as well as limitations in vascularization and patterning of complex structures of natural tissues which barricade the production of sophisticated organs. Therefore, in addition to a review on advanced methods and techniques for measuring a variety of different biomechanical characteristics of hydrogels, the new techniques for enhancing the biomechanics of hydrogels are presented. It is expected that this review will profit future works for regulating the biomechanical properties of hydrogel biomaterials to satisfy the demands of a variety of different human tissues.

Loss of giant obscurins alters breast epithelial cell mechanosensing of matrix stiffness

Obscurins are a family of RhoGEF-containing proteins with tumor and metastasis suppressing roles in breast epithelium. Downregulation of giant obscurins in normal breast epithelial cells leads to reduced levels of active RhoA and of its downstream effectors. Herein, we elucidate how depletion of giant obscurins affects the response of breast epithelial cells to changes in the mechanical properties of the microenvironment. We find that knockdown of obscurins increases cell morphodynamics, migration speed, and diffusivity on polyacrylamide gels of ≥ 1 kPa, presumably by decreasing focal adhesion area and density as well as cell traction forces. Depletion of obscurins also increases cell mechanosensitivity on soft (0.4-4 kPa) surfaces. Similar to downregulation of obscurins, pharmacological inhibition of Rho kinase in breast epithelial cells increases migration and morphodynamics, suggesting that suppression of Rho kinase activity following obscurin knockdown can account for alterations in morphodynamics and migration. In contrast, inhibition of myosin light chain kinase reduces morphodynamics and migration, suggesting that temporal changes in cell shape are required for efficient migration. Collectively, downregulation of giant obscurins facilitates cell migration through heterogeneous microenvironments of varying stiffness by altering cell mechanobiology.

Effect of matrix stiffness on the proliferation and differentiation of umbilical cord mesenchymal stem cells

Mesenchymal stem cells (MSCs) are a compatible cellular alternative for regenerative medicine and tissue engineering because of their powerful multipotency. Matrix stiffness plays a profound role on stem cell behavior. Nevertheless, the effect of matrix stiffness on umbilical cordmesenchymal stem cells (UC-MSCs) remains unexplored. To conduct an in-depth exploration, we cultured UC-MSCs on different stiffness (Young's modulus: 13-16, 35-38, 48-53, and 62-68 kPa) polyacrylamide gels coated with fibronectin. We found that the proliferation and adhesion of UC-MSCs varied when cultured on the different matrices, and the spreading capacity was stronger as the stiffness increased (*P<0.05). Real-time quantitative PCR results showed that the soft matrix promoted adipogenic differentiation, with higher expression levels of adipocytic markers like PPARγ and C/EBPα (*P<0.05). In contrast, cells tended to differentiate into muscle when cultured on the 48-53 kPa matrix, which was validated by increased expression of myogenic makers like desminand MOYG (*P<0.05). Moreover, increased expression of osteoblastic makers (*P<0.05), such as ALP, collagen type I, osteocalcin, and Runx2, confirmed that cells differentiated into bone on the high-stiffness matrix.

Viscoelasticity of multicellular surfaces

Various modeling approaches have been applied to describe viscoelasticity of multicellular surfaces. The viscoelasticity is considered within three time regimes: (1) short time regime for milliseconds to seconds time scale which corresponds to sub-cellular level; (2) middle time regime for several tens of seconds to several minutes time scale which corresponds to cellular level; and (3) long time regime for several tens of minutes to several hours time scale which corresponds to supra-cellular level. Short and middle time regimes have been successfully elaborated in the literature, whereas long time viscoelasticity remains unclear. Long time regime accounts for collective cell migration. Collective cell migration could induce uncorrelated motility which has an impact to energy storage and dissipation during cell surface rearrangement. Uncorrelated motility influences: (1) volume fraction of migrating cells, (2) distribution of migrating cells, (3) shapes of migrating cell groups. These parameters influence mechanical coupling between migrating and resting subpopulations and consequently the constitutive model for long time regime. This modeling consideration indicates that additional experimental work is needed to confirm the feasibility of constitutive models which have been applied in literature for long time regime as: (1) relaxation of stress and strain, (2) storage and loss moduli as the function of time, (3) distribution of migrating cells.

Different TCR-induced T lymphocyte responses are potentiated by stiffness with variable sensitivity

T cells are mechanosensitive but the effect of stiffness on their functions is still debated. We characterize herein how human primary CD4⁺ T cell functions are affected by stiffness within the physiological Young’s modulus range of 0.5 kPa to 100 kPa. Stiffness modulates T lymphocyte migration and morphological changes induced by TCR/CD3 triggering. Stiffness also increases TCR-induced immune system, metabolism and cell-cycle-related genes. Yet, upon TCR/CD3 stimulation, while cytokine production increases within a wide range of stiffness, from hundreds of Pa to hundreds of kPa, T cell metabolic properties and cell cycle progression are only increased by the highest stiffness tested (100 kPa). Finally, mechanical properties of adherent antigen-presenting cells modulate cytokine production by T cells. Together, these results reveal that T cells discriminate between the wide range of stiffness values found in the body and adapt their responses accordingly.

DOI:http://dx.doi.org/10.7554/eLife.23190.001

Our immune system contains many cells that play various roles in defending the body against infection, cancer and other threats. For example, T cells constantly patrol the body ready to detect and respond to dangers. They do so by gathering cues from their surroundings, which can be specific chemical signals or physical properties such as the stiffness of tissues. Once the T cells are active they respond in several different ways including releasing hormones and dividing to produce more T cells.

Tissue stiffness varies considerably between different organs. Furthermore, disease can lead to changes in tissue stiffness. For example, tissues become more rigid when they are inflamed. The stiffness and other physical properties of the surfaces that T cells interact with affect how the cells respond when they detect a threat, but few details are known about exactly how these cues tune T cell responses. Saitakis et al. studied how human T cells respond to artificial surfaces of varying stiffness that mimic the range found in the body.

The experiments show that T cells that interact with stiff surfaces become more active than T cells that interact with softer surfaces. However, some responses are more sensitive to the stiffness of the surface than others. For example, the ability of the T cells to release hormones was affected by the whole range of stiffnesses tested in the experiments, whereas only very stiff surfaces stimulated the T cells to divide.

These findings show that T cells can detect the stiffness of surfaces in the body and use this to adapt how they respond to threats. Future challenges will be to find out how T cells sense the physical properties of their surroundings and investigate whether cell and tissue stiffness affects immune responses in the body. This will help us to understand how T cells fight infections and other threats, and could be used to develop new ways of boosting these cells to fight cancer and other diseases.

DOI:http://dx.doi.org/10.7554/eLife.23190.002

3D full-field quantification of cell-induced large deformations in fibrillar biomaterials by combining non-rigid image registration with label-free second harmonic generation

To advance our current understanding of cell-matrix mechanics and its importance for biomaterials development, advanced three-dimensional (3D) measurement techniques are necessary. Cell-induced deformations of the surrounding matrix are commonly derived from the displacement of embedded fiducial markers, as part of traction force microscopy (TFM) procedures. However, these fluorescent markers may alter the mechanical properties of the matrix or can be taken up by the embedded cells, and therefore influence cellular behavior and fate. In addition, the currently developed methods for calculating cell-induced deformations are generally limited to relatively small deformations, with displacement magnitudes and strains typically of the order of a few microns and less than 10% respectively. Yet, large, complex deformation fields can be expected from cells exerting tractions in fibrillar biomaterials, like collagen. To circumvent these hurdles, we present a technique for the 3D full-field quantification of large cell-generated deformations in collagen, without the need of fiducial markers. We applied non-rigid, Free Form Deformation (FFD)-based image registration to compute full-field displacements induced by MRC-5 human lung fibroblasts in a collagen type I hydrogel by solely relying on second harmonic generation (SHG) from the collagen fibrils. By executing comparative experiments, we show that comparable displacement fields can be derived from both fibrils and fluorescent beads. SHG-based fibril imaging can circumvent all described disadvantages of using fiducial markers. This approach allows measuring 3D full-field deformations under large displacement (of the order of 10 μm) and strain regimes (up to 40%). As such, it holds great promise for the study of large cell-induced deformations as an inherent component of cell-biomaterial interactions and cell-mediated biomaterial remodeling.

Synthesis, mechanical and thermal rheological properties of new gellan gum derivatives

New derivatives of gellan gum (GG) were prepared by covalent attachment of octadecylamine (C₁₈-NH₂) to polysaccharide backbone via amide linkage by using bis(4-nitrophenyl) carbonate (4-NPBC) as a coupling agent. The effect of the alkyl chain grafted onto hydrophilic backbone of high molecular weight GG was investigated in terms of physicochemical properties and ability of new derivatives to form hydrogels. A series of hydrogels was obtained in solutions with different kind and concentration of ions and their stability and mechanical properties were evaluated. The obtained derivatives resulted soluble at temperature lower than starting GG and physicochemical properties of obtained hydrogels suggested their potential use in biomedical field.

Biomedical implications from a morphoelastic continuum model for the simulation of contracture formation in skin grafts that cover excised burns

A continuum hypothesis-based model is developed for the simulation of the (long term) contraction of skin grafts that cover excised burns in order to obtain suggestions regarding the ideal length of splinting therapy and when to start with this therapy such that the therapy is effective optimally. Tissue is modeled as an isotropic, heterogeneous, morphoelastic solid. With respect to the constituents of the tissue, we selected the following constituents as primary model components: fibroblasts, myofibroblasts, collagen molecules, and a generic signaling molecule. Good agreement is demonstrated with respect to the evolution over time of the surface area of unmeshed skin grafts that cover excised burns between outcomes of computer simulations obtained in this study and scar assessment data gathered previously in a clinical study. Based on the simulation results, we suggest that the optimal point in time to start with splinting therapy is directly after placement of the skin graft on its recipient bed. Furthermore, we suggest that it is desirable to continue with splinting therapy until the concentration of the signaling molecules in the grafted area has become negligible such that the formation of contractures can be prevented. We conclude this study with a presentation of some alternative ideas on how to diminish the degree of contracture formation that are not based on a mechanical intervention, and a discussion about how the presented model can be adjusted.

Biophysical Regulation of Cell Behavior-Cross Talk between Substrate Stiffness and Nanotopography

The stiffness and nanotopographical characteristics of the extracellular matrix (ECM) influence numerous developmental, physiological, and pathological processes in vivo. These biophysical cues have therefore been applied to modulate almost all aspects of cell behavior, from cell adhesion and spreading to proliferation and differentiation. Delineation of the biophysical modulation of cell behavior is critical to the rational design of new biomaterials, implants, and medical devices. The effects of stiffness and topographical cues on cell behavior have previously been reviewed, respectively; however, the interwoven effects of stiffness and nanotopographical cues on cell behavior have not been well described, despite similarities in phenotypic manifestations. Herein, we first review the effects of substrate stiffness and nanotopography on cell behavior, and then focus on intracellular transmission of the biophysical signals from integrins to nucleus. Attempts are made to connect extracellular regulation of cell behavior with the biophysical cues. We then discuss the challenges in dissecting the biophysical regulation of cell behavior and in translating the mechanistic understanding of these cues to tissue engineering and regenerative medicine.

Keloid progression: a stiffness gap hypothesis

Keloids are fibroproliferative skin disorders characterised clinically by continuous horizontal progression and post-surgical recurrence and histologically by the accumulation of collagen and fibroblast ingredients. Till now, their aetiology remains clear, which may cover genetic, environmental and metabolic factors. Evidence in the involvement of local mechanics (e.g. predilection site and typical shape) and the progress in mechanobiology have incubated our stiffness gap hypotheses in illustrating the chronic but constant development in keloid. We put forward that the enlarged gap between extracellular matrix (ECM) stiffness and cellular stiffness potentiates keloid progression. Matrix stiffness itself provides organisational guidance cues to regulate the mechanosensitive resident cells (e.g. proliferation, migration and apoptosis). During this dynamic process, the ECM stiffness and cell stiffness are not well balanced, and the continuously enlarged stiffness gap between them potentiates keloid progression. The cushion factors, such as prestress for cell stiffness and topology for ECM stiffness, serve as compensations, the decompensation of which aggravates keloid development. It can well explain the typical shape of keloids, their progression in a horizontal but not vertical direction and the post-surgical recurrence, which were evidenced by our clinical cases. Such a stiffness gap hypothesis might be bridged to mechanotherapeutic approaches for keloid progression.

A mathematical model for the simulation of the contraction of burns

A continuum hypothesis-based model is developed for the simulation of the contraction of burns in order to gain new insights into which elements of the healing response might have a substantial influence on this process. Tissue is modeled as a neo-Hookean solid. Furthermore, (myo)fibroblasts, collagen molecules, and a generic signaling molecule are selected as model components. An overview of the custom-made numerical algorithm is presented. Subsequently, good agreement is demonstrated with respect to variability in the evolution of the surface area of burns over time between the outcomes of computer simulations and measurements obtained in an experimental study. In the model this variability is caused by varying the values for some of its parameters simultaneously. A factorial design combined with a regression analysis are used to quantify the individual contributions of these parameter value variations to the dispersion in the surface area of healing burns. The analysis shows that almost all variability in the surface area can be explained by variability in the value for the myofibroblast apoptosis rate and, to a lesser extent, the value for the collagen molecule secretion rate. This suggests that most of the variability in the evolution of the surface area of burns over time in the experimental study might be attributed to variability in these two rates. Finally, a probabilistic analysis is used in order to investigate in more detail the effect of variability in the values for the two rates on the healing process. Results of this analysis are presented and discussed.

Precise positioning of cancerous cells on PDMS substrates with gradients of elasticity

In this work the novel method to create PDMS substrates with continuous and discrete elasticity gradients of different shapes and dimensions over the large areas was introduced. Elastic properties of the sample were traced using force spectroscopy (FS) and quantitative imaging (QI) mode of atomic force microscopy (AFM). Then, fluorescence microscopy was applied to investigate the effect of elastic properties on proliferation of bladder cancer cells (HCV29). Obtained results show that cancerous cells proliferate significantly more effective on soft PDMS, whereas the stiff one is almost cell-repellant. This strong impact of substrate elasticity on cellular behavior is driving force enabling precise positioning of cells.

A biomechanical mathematical model for the collagen bundle distribution-dependent contraction and subsequent retraction of healing dermal wounds

A continuum hypothesis-based, biomechanical model is presented for the simulation of the collagen bundle distribution-dependent contraction and subsequent retraction of healing dermal wounds that cover a large surface area. Since wound contraction mainly takes place in the dermal layer of the skin, solely a portion of this layer is included explicitly into the model. This portion of dermal layer is modeled as a heterogeneous, orthotropic continuous solid with bulk mechanical properties that are locally dependent on both the local concentration and the local geometrical arrangement of the collagen bundles. With respect to the dynamic regulation of the geometrical arrangement of the collagen bundles, it is assumed that a portion of the collagen molecules are deposited and reoriented in the direction of movement of (myo)fibroblasts. The remainder of the newly secreted collagen molecules are deposited by ratio in the direction of the present collagen bundles. Simulation results show that the distribution of the collagen bundles influences the evolution over time of both the shape of the wounded area and the degree of overall contraction of the wounded area. Interestingly, these effects are solely a consequence of alterations in the initial overall distribution of the collagen bundles, and not a consequence of alterations in the evolution over time of the different cell densities and concentrations of the modeled constituents. In accordance with experimental observations, simulation results show furthermore that ultimately the majority of the collagen molecules ends up permanently oriented toward the center of the wound and in the plane that runs parallel to the surface of the skin.