Microwave assisted hydrothermal preparation of rice straw hydrochars for adsorption of organics and heavy metals

KOH-activated porous biochar with high specific surface area for adsorptive removal of chromium (VI) and naphthalene from water: Affecting factors, mechanisms and reusability exploration

Herein, a high-performance porous biochar described as PBC_KOH was successfully synthesized by two-step pyrolysis of corn straw with chemical activation of KOH, and was employed for the elimination of Cr(VI) and naphthalene (NAP) from water. Benefiting from KOH activation, the PBC_KOH was found to possess huge specific surface area of 2183.80 m²/g and many well-developed micropores with average particle size of 2.75 nm and main pore diameters distribution from 1 to 2 nm. The PBC_KOH presented an excellent adsorption performance with a theoretical monolayer uptake of 116.97 mg/g for Cr(VI) and a heterogeneous adsorption capacity of 450.43 mg/g for NAP. The uptake equilibrium was attained within about 120 min for Cr(VI), while about 180 min for NAP following avrami fractional-order model, revealing the existence of multiple kinetics during the adsorption. The thermodynamic results showed that the uptake of both Cr(VI) and NAP occurred spontaneously (-ΔG°), while in an endothermic nature for Cr(VI) (+ΔH°) and an exothermic characteristic for NAP (-ΔH°) with different randomness. Furthermore, the PBC_KOH was believed to enhance the Cr(VI) adsorption mainly through the combination of electrostatic attraction, complexation, ion exchange and reduction action, while achieving the high NAP uptake by pore filling and π-π stacking interactions.

Bridging the gap to hydrochar production and its application into frameworks of bioenergy, environmental and biocatalysis areas

Hydrothermal carbonization (HTC) is a facile, low-cost and eco-friendly thermal conversion process that has recently gained attention with a growing number of publications (lower 50 in 2000 to over 1500 in 2020). Despite being a promising technology, problems such as operational barriers, complex reaction mechanisms and scaling have to be solved to make it a commercial technology. To bridge this current gap, this review elaborates on the chemistry of the conversion of lignocellulosic biomass. Besides, a comprehensive overview of the influence of the HTC operational conditions (pH, temperature, water:biomass ratio, residence time and water recirculation) are discussed to better understand how hydrochar with desired properties can be efficiently produced. Large-scale examples of the application of HTC are also presented. Current applications of hydrochar in the fields of energy, biocatalysis and environment are reviewed. Finally, economic cost and future prospects are analyzed.

Increasing straw surface functionalities for enhanced adsorption property

A simple low-temperature partial-oxidation process was demonstrated as an effective technology for reed straw modification towards environmental remediation. At an optimal temperature of 180 °C, the straw materials exhibited a remarkable colour change from light yellow to dark brown, increased methylene blue (MB) uptake by 1.8 times, enhanced removal efficiency from 34.5% to 92.8%, and a high yield of 77.2%. Spectroscopic characterization and Boehm titration proved that the amount of surface oxygen (O)-containing functional groups significantly increased after modification. A strong linear correlation (R² = 0.93) existed between total amounts of O-containing functional groups and MB uptake for modification temperatures below 180 °C, whereas blockage of the pore entrances and competition with metallic cations must be taken into account for samples generated from excess heating (>180 °C). These results provided insights into designing promising technologies for sustainable environmental management through reutilization of agricultural waste.

Regulation mechanisms of humic acid on Pb stress in tea plant (Camellia sinensis L.)

Though the interaction between humic acid (HA) and heavy metals has been widely reported, the effects of HA on the toxicity of heavy metals to plants are still in debate. In this study, the regulation mechanisms of HA on Pb stress in tea plant (Camellia sinensis L.) was investigated through hydroponic experiments, and the experimental results were explained by using transmission electron microscope (TEM), scanning transmission X-ray microscopes (STXM) and isobaric tags for relative and absolute quantitation (iTRAQ) differential proteomics. Significant alleviation of Pb stress was found with HA coexistence. TEM results showed that HA greatly mitigated the damage of cells caused by Pb stress. Compared with sole Pb treatment, the addition of HA increased the contents of pectin and pectic acid in the cell wall by 10.5% and 30.5%, while arabinose (Ara) and galactose (Gal) decreased by 20.5% and 15.9%, respectively, which were beneficial for increasing Pb adsorption capacity of the cell wall and promoting cell elongation. Moreover, iTRAQ differential proteomics analysis proved that HA strengthened the antioxidant system, promoted the synthesis of cell wall, and stabilized protein and sulfur-containing substance metabolism in molecular level. Notably, the concentration of calcium (Ca) in the cell wall of HA coexistence treatment was 47.4% higher than Pb treatment. STXM results also indicated that the distribution of Ca in the cell wall was restored with the presence of HA. This might promote the formation of the egg-box model, thus alleviating Pb stress in cells. Our results reveal the regulation mechanisms of HA on Pb detoxification in plants and provide useful information for improving the safety of agricultural products.

Facile synthesis of multifunctional bone biochar composites decorated with Fe/Mn oxide micro-nanoparticles: Physicochemical properties, heavy metals sorption behavior and mechanism

The value-added utilization of waste resources to synthesize functional materials is important to achieve the environmentally sustainable development. In this work, novel micro-nano FeOx- and MnOx-modified bone biochars derived from waste bone meal were obtained at 300 °C, 450 °C and 600 °C, and applied to remove Cd(II), Cu(II) and Pb(II) from aqueous solutions. The results showed that the pyrolysis temperature greatly influenced the specific surface area (SSA), micropore creation, functional groups and heavy metal sorption capacities of FO-BCs and MO-BCs. The effects of solution pH, ionic strength, humic acid (HA), kinetics and thermodynamics on heavy metals adsorption were investigated. Langmuir and pseudo-second order kinetics models fit the adsorption data well, and the FO-BC-450 and MO-BC-600 displayed the highest sorption capacity for Cd(II) (151.3 mg/g and 163.4 mg/g), Cu(II) (219.8 mg/g and 259.0 mg/g) and Pb(II) (271.9 mg/g and 407.2 mg/g), respectively. Due to the dissolved partial hydroxyapatite (HAP), carbonate-bearing hydroxyapatite (CHAP) and the catalysis of Fe(NO₃)₃, the FO-BCs with higher SSA than the MO-BCs, whereas the sorption capacity displayed an opposite trend. The chemical complex, cation-π bonds, ion exchange and coprecipitation were the dominant mechanisms for metals adsorption. Overall, waste bone resource co-pyrolysis with Fe(NO₃)₃/KMnO₄ impregnation is a promising and high-efficient adsorbents for the remediation of heavy metals-contaminated waters.

Facile synthesis of xanthan biopolymer integrated 3D hierarchical graphene oxide/titanium dioxide composite for adsorptive lead removal in wastewater

Xanthan integrated graphene oxide functionalized by titanium dioxide was successfully prepared through facile, eco-friendly and cost effective ice-templating technique. The three-dimensional (3D) graphene composite demonstrated relatively high temperature stability, chemical functionalities and porous sponge-like structure. The adsorption of lead was favored by high initial concentration and shaking speed at the operational solution pH. The process equilibrium and kinetic adhered to the Langmuir and pseudo-second-order correlations, respectively. The biomass integrated graphene composite showed maximum adsorption capacities ranging from 132.18 to 199.22 mg/g for 30-70 °C. Moreover, it was highly regenerable under mild conditions (0.1 M hydrochloric acid, 30 °C) and used repeatedly while retaining 84.78% of its initial adsorption capacity at the fifth adsorption-regeneration cycle. With comparatively high lead adsorption capacities, adequate recyclability and environmentally friendliness, the as-prepared 3D graphene composite has high application potential in heavy metal-wastewater separation for protection of the environment and human health.

Different adsorption behaviors and mechanisms of a novel amino-functionalized hydrothermal biochar for hexavalent chromium and pentavalent antimony

A novel amino-functionalized hydrothermal biochar modified with nitric acid and nicotinamide (NMSH) was prepared and applied to remove heavy metal in different systems. The study of batch adsorption found that NMSH had different adsorption behaviors for Cr(VI) and Sb(V), and different concentrations of heavy metal ions exhibited different coadsorption behaviors in mixed system. NMSH had great anti-interference ability to coexisting inorganic ion and humic substance. The maximum adsorption capacity of NMSH was 132.74 mg/g for Cr(VI), and 241.92 mg/g for Sb(V). Moreover, different interfering ions and matter had different effects on adsorption. The mechanism study found that the adsorption mechanism of NMSH involved multiple interactions, and the mechanisms were different. Some O-containing functional groups of NMSH could reduce Cr(VI) to Cr(III), but not Sb(V). NMSH had great removal efficiency and reusability performance, which suggested that NMSH had prospects for practical wastewater treatment.

Biochar for Wastewater Treatment—Conversion Technologies and Applications

Biochar as a stable carbon-rich material shows incredible potential to handle water/wastewater contaminants. Its application is gaining increasing interest due to the availability of feedstock, the simplicity of the preparation methods, and their enhanced physico-chemical properties. The efficacy of biochar to remove organic and inorganic pollutants depends on its surface area, pore size distribution, surface functional groups, and the size of the molecules to be removed, while the physical architecture and surface properties of biochar depend on the nature of feedstock and the preparation method/conditions. For instance, pyrolysis at high temperatures generally produces hydrophobic biochars with higher surface area and micropore volume, allowing it to be more suitable for organic contaminants sorption, whereas biochars produced at low temperatures own smaller pore size, lower surface area, and higher oxygen-containing functional groups and are more suitable to remove inorganic contaminants. In the field of water/wastewater treatment, biochar can have extensive application prospects. Biochar have been widely used as an additive/support media during anaerobic digestion and as filter media for the removal of suspended matter, heavy metals and pathogens. Biochar was also tested for its efficiency as a support-based catalyst for the degradation of dyes and recalcitrant contaminants. The current review discusses on the different methods for biochar production and provides an overview of current applications of biochar in wastewater treatment.

Characterization and sulfonamide antibiotics adsorption capacity of spent coffee grounds based biochar and hydrochar

A large amount of spent coffee grounds is produced as a processing waste each year during making the coffee beverage. Sulfonamide antibiotics (SAs) are frequently detected in the environment and cause pollution problems. In this study, biochar (BC) and hydrochar (HC) were derived from spent coffee grounds through pyrolysis and hydrothermal carbonization, respectively. Their characteristics and sulfonamide antibiotics adsorption were investigated and compared with reference to adsorption capacity, adsorption isotherm and kinetics. Results showed BC possessed more carbonization and less oxygen-containing functional groups than HC when checked by Elemental Analysis, X-ray diffraction, X-ray photoelectron spectrometry and Fourier transform infrared. These groups affected the adsorption of sulfonamide antibiotics and adsorption mechanism. The maximum adsorption capacities of BC for sulfadiazine (SDZ) and sulfamethoxazole (SMX) were 121.5 μg/g and 130.1 μg/g at 25 °C with the initial antibiotic concentration of 500 μg/L, respectively. Meanwhile the maximum adsorption capacities of HC were 82.2 μg/g and 85.7 μg/g, respectively. Moreover, the adsorption mechanism for SAs adsorbed onto BC may be dominated by π-π electron donor-acceptor interactions, yet the SAs adsorption to HC may be attributed to hydrogen bonds. Further analysis of the adsorption isotherms and kinetics, found that physical and chemical interactions were involved in the SAs adsorption onto BC and HC. Overall, results suggested that: firstly, pyrolysis was an effective thermochemical conversion of spent coffee grounds; and secondly, BC was the more promising adsorbent for removing sulfonamide antibiotics.

Fabrication of N-doped carbons from waste bamboo shoot shell with high removal efficiency of organic dyes from water

N-doped carbons were obtained from bamboo shoot shell via hydrothermal pretreatment under salt assistance followed by carbonization, using melamine as nitrogen source. The carbons with tubular morphology and surface areas in 406-489 m²/g range were used as adsorbents for the removal of methyl orange (MO) and rhodamine B (RhB). Adsorption isotherms and kinetic fitting showed much better accordance with Freundlich model and pseudo-second-order, showing balanced capacity (q_e) of 50 mg/g for MO and 42 mg/g for RhB on the pristine carbons (BHC-800) at 25 °C. After N-doping treatment, carbons (BSC-M20) had q_e of MO and RhB up to 140 and 100 mg/g, respectively, confirming a positive effect of N-doping on the enhancement of dyes removal. The findings indicated that hydrothermal treatment followed by carbonization was efficient to obtain N-doped carbons from biomass materials, and the present BSS-derived carbons were promising adsorbents for organic dyes removal from water.

One-step hydrothermal synthesis of magnetic rice straw for effective lipase immobilization and its application in esterification reaction

Immobilization of industrially important enzymes on supports is important to decrease the cost of the overall enzymatic production procedure. Herein, a novel method for synthesizing a new support, magnetic rice straw (MRS) in one step is reported: rice straw (RS) was soaked with Fe²⁺ ions and these were further reduced to form embedded Fe₂O₃ nanoparticles on the RS surface, forming MRS. This material presented a magnetic saturation value of 27.32 emu g^-1. Lipase immobilization on MRS resulted in 94.3% immobilization efficiency and 91.3 mg g^-1 of enzyme loading, which are higher than immobilization on native RS. The lipase stability was increased approximately 8-fold at 70 °C. The lipase-MRS composite was tested in the esterification reaction of biodiesel production, where it showed prominent reusability. Therefore, this novel and rapid synthesis method can provide ecological and economic support for enzyme immobilization and industrially important product formation.

Facile Synthesis of Calcite-Impregnated Hydrochar with High Sorption Capacity for Cu(II) from Aqueous Solution

Calcite-impregnated hydrochar (Ca-HC) was successfully synthesized by a one-step hydrothermal method and used as an adsorbent for Cu(II) remediation. Characterization techniques showed that Ca-HC contained calcite and oxygen-containing functional groups. A series of Cu(II) sorption experiments onto Ca-HC showed that the initial Cu(II) concentration, contact time, sorption temperature, and initial pH of the solution influenced the sorption of Cu(II). The actual achievable sorption capacity of Ca-HC for Cu(II) was 130.57 mg g^-1 at 303 K, and the sorption process obeyed the Langmuir model and pseudo-second-order kinetic equation. The precipitation and surface complexation rather than ion exchange were mainly ascribed to the removal of Cu(II) onto Ca-HC. The calcite provided the active site to produce posnjakite precipitation during the sorption process and enhance the sorption capacity of the hydrochar. Therefore, these results demonstrated that Ca-HC is an effective sorbent that can remove Cu(II) from water.

Adsorption of 2-nitrophenol using rice straw and rice husks hydrolyzed by subcritical water

The potential of rice husks and straw as adsorbents after being processed by subcritical water hydrolysis (SWH) was investigated. The influences of temperature (453, 493 and 533 K) and liquid/solid ratio (7.5 and 15 g water/g biomass) on the rice straw and rice husks characteristics and on the adsorption capacity of 2-nitrophenol were evaluated at pH 4 and 7. Adsorption kinetics, equilibrium and thermodynamic parameters were also studied. The adsorption capacity was favored at pH 7. Pseudo-first-order model was suitable to predict the kinetic curves for 2-nitrophenol concentrations of 25, 50, 75 and 100 mg/L and the isotherm data obeyed the Freundlich model. Overall, the thermodynamic results revealed a spontaneous and exothermic process. The maximum adsorption capacity (92.97 ± 1.31 mg/g) was obtained for rice straw that has undergone an SWH at 453 K and 7.5 g water/g straw. The integration of processes to valorize co-products can make the production of cellulosic bioethanol more feasible.

Sustainable and scalable in-situ synthesis of hydrochar-wrapped Ti3AlC2-derived nanofibers as adsorbents to remove heavy metals

To ensure a sustainable future, it is imperative to efficiently utilize abundant biomass to produce such as platform chemicals, transport fuels, and other raw materials; hydrochar is one of the promising candidates derived by hydrothermal carbonization of biomass in pressurized hot water. The synthesis of "hydrochar-wrapped Ti₃AlC₂-derived nanofibers" was successfully achieved by a facile one-pot hydrothermal reaction using glucose as the hydrochar precursor. Meanwhile, cellulose and pinewood sawdust as raw materials were also investigated. Products were characterized by XRD, N₂ adsorption-desorption isotherms, SEM, TEM and FT-IR to investigate their crystal structures, textural properties, morphologies, and surface species. In the adsorption test to remove Cd(II) and Cu(II) in aqueous solution, hydrochar-wrapped nanofibers outperformed pure nanofibers derived from Ti₃AlC₂, hydrothermal carbon derived from glucose and commercial activated carbon. Finally, the regeneration, sorption kinetics, and possible adsorption mechanism were also explored.

Highly efficient removal of Cr(VI) and Cu(II) by biochar derived from Artemisia argyi stem

In this work, a novel biochar was prepared from the Artemisia argyi stem at 300 °C (AS300), 450 °C (AS450), and 600 °C (AS600). The structural properties of these biochars were characterized with various tools. The sorption kinetic processes of Cr(VI) and Cu(II) onto these biochars were better described by the pseudo-second order. The sorption isotherm processes of Cr(VI) onto these biochars were better described by the Freundlich model while the adsorption processes of Cu(II) were consistent with the Langmuir model. Batch sorption experiments showed that AS600 had the maximum adsorption capacity to Cr(VI) and Cu(II) with 161.92 and 155.96 mg/g, respectively. AS600 was selected for the follow-up batch and dynamic adsorption experiments. Results showed that AS600 had larger adsorption capacity for Cr(VI) at lower pH while the larger adsorption capacity for Cu(II) was found at higher pH. The effect of ionic strength on the adsorption of Cu(II) by AS600 was greater than that on the adsorption of Cr(VI). Dynamic adsorption experiments showed that Cu(II) had a higher affinity for the adsorption sites on the AS600 compared with Cr(VI). The adsorption mechanisms mainly involved electrostatic attraction, ion exchange, pore filling, and chemical bonding effect. Graphical abstract.