Recent advances of BODIPY based derivatives for optoelectronic applications

Halogenated BODIPY photosensitizers: Photophysical processes for generation of excited triplet state, excited singlet state and singlet oxygen

We have systematically examined the formation of singlet oxygen O₂(¹Δ_g), the excited triplet state (T₁), and excited singlet state (S₁) for halogenated BODIPY photosensitizers (halogen = Cl, Br, and I) in eight solvents to understand how halogen atoms and solvent affect these properties. The phosphorescence spectra and lifetimes of singlet oxygen generated by these halogenated BODIPYs have been measured by steady state/time resolved NIR emission, while the formation quantum yield of singlet oxygen (Φ_Δ) has been determined by chemical method using diphenylisobenzofuran (DPBF) as the trapping agent. The formation quantum yield Φ_Δ of singlet oxygen can be as high as 0.96 for iodinated BODIPY and 0.71 for brominated BODIPY. The triplet state T₁ absorption spectra of brominated and iodinated BODIPYs have been recorded by laser flash photolysis method, in which T₁ shows high formation efficiency and long lifetime. The formation and decay of excited singlet state S₁ of four BODIPYs have been measured by ground state (S₀) absorption and steady state/time resolved fluorescence. The results show that larger halogen atoms on BODIPY core lead to smaller fluorescence quantum yield, shorter fluorescence lifetime and higher singlet oxygen formation quantum yield due to heavy atom effect that promotes the formation of triplet state. On the other hand, higher solvent polarity causes lower singlet oxygen formation quantum yield, smaller fluorescence quantum yield, and shorter fluorescence lifetime. This solvent effect is explained by the presence of photoinduced charge transfer (ICT) process from halogen atoms to BODIPY. The ICT efficiency has been estimated and the results are agreed with ICT theory. ICT process in halogenated BODIPYs has never been revealed in literature. HOMO/LUMO obtained from DFT calculation also supports the presence of ICT. The involvement of ICT in the photosensitizing process of halogenated BODIPYs provides new insights for designing BODIPY photosensitizers for photodynamic therapy of tumor.

Enhancement of Two-Photon Absorption in Boron-Dipyrromethene (BODIPY) Derivatives

The linear and nonlinear optical properties of two BODIPY derivatives, 1,7-Diphenyl-3,5-bis(9,9-dimethyl-9H-fluoren-2-yl)-boron-diuoride-azadipyrromethene (ZL-61) and 1,7-Diphenyl-3,5-bis(4-(1,2,2-triphenylvinyl)phenyl)-boron-diuoride-azadipyrromethene (ZL-22), were comprehensively investigated based on experimental and theoretical studies. It was found that both compounds show a strong two-photon absorption response in the near-infrared regime, and the two-photon-absorption cross-section values of ZL-61 and ZL-22 were determined to be 8321 GM and 1864 GM at 800 nm, respectively. The improvement of the two-photon absorption cross section in ZL-61 was attributed to the enhancement of the donor group, which was confirmed by transient absorption measurements and DFT calculation. Our results indicate that these BODIPY derivatives are a promising candidate for optical limiting and two-photon imaging applications.

Nanoparticulate Photoluminescent Probes for Bioimaging: Small Molecules and Polymers

Recent interest in research on photoluminescent molecules due to their unique properties has played an important role in advancing the bioimaging field. In particular, small molecules and organic dots as probes have great potential for the achievement of bioimaging because of their desirable properties. In this review, we provide an introduction of probes consisting of fluorescent small molecules and polymers that emit light across the ultraviolet and near-infrared wavelength ranges, along with a brief summary of the most recent techniques for bioimaging. Since photoluminescence probes emitting light in different ranges have different goals and targets, their respective strategies also differ. Diverse and novel strategies using photoluminescence probes against targets have gradually been introduced in the related literature. Among recent papers (published within the last 5 years) on the topic, we here concentrate on the photophysical properties and strategies for the design of molecular probes, with key examples of in vivo photoluminescence research for practical applications. More in-depth studies on these probes will provide key insights into how to control the molecular structure and size/shape of organic probes for expanded bioimaging research and applications.

Development and Challenge of Fluorescent Probes for Bioimaging Applications: From Visualization to Diagnosis

Fluorescent probes have been used widely in bioimaging, including biological substance detection, cell imaging, in vivo biochemical reaction process tracking, and disease biomarker monitoring, and have gradually occupied an indispensable position. Compared with traditional biological imaging technologies, such as positron emission tomography (PET) and nuclear magnetic resonance imaging (MRI), the attractive advantages of fluorescent probes, such as real-time imaging, in-depth visualization, and less damage to biological samples, have made them increasingly popular. Among them, ultraviolet-visible (UV-vis) fluorescent probes still occupy the mainstream in the field of fluorescent probes due to the advantages of available structure, simple synthesis, strong versatility, and wide application. In recent years, fluorescent probes have become an indispensable tool for bioimaging and have greatly promoted the development of diagnostics. In this review, we focus on the structure, design strategies, advantages, representative probes and latest discoveries in application fields of UV-visible fluorescent probes developed in the past 3-5 years based on several fluorophores. We look forward to future development trends of fluorescent probes from the perspective of bioimaging and diagnostics. This comprehensive review may facilitate the development of more powerful fluorescent sensors for broad and exciting applications in the future.

Effect of the Aza-N-Bridge and Push-Pull Moieties: A Comparative Study between BODIPYs and Aza-BODIPYs

In the field of fluorescent dyes, difluoroboron-dipyrromethenes (BODIPY) have a highly respected position. To predict their photophysical properties prior to synthesis and therefore to successfully design molecules specifically for one's needs, a solid structure-function understanding based on experimental observations is vital. This work delivers a photophysical evaluation of BODIPY and aza-BODIPY derivatives equipped with different electron-withdrawing/-donating substituents. Using combinatorial chemistry, pyrroles substituted with electron-donating/-withdrawing substituents were condensed together in two different manners, thus providing two sets of molecules. The only difference between the two sets is the bridging unit providing a so far lacking comparison between BODIPYs and aza-BODIPYs structural homologues. Replacing the meso-methine bridge with an aza-N bridge results in a red-shifted transition and considerably different, temperature-activated, excited-state relaxation pathways. The effect of electron-donating units on the absorption but not emission for BODIPYs was suppressed compared to aza-BODIPYs. This result could be evident in a substitution pattern-dependent Stokes shift. The outlook of this study is a deeper understanding of the structure-optics relationship of the (aza)-BODIPY-dye class, leading to an improvement in the de novo design of tailor-made molecules for future applications.

Solvent effects on excited-state relaxation dynamics of paddle-wheel BODIPY-Hexaoxatriphenylene conjugates: Insights from non-adiabatic dynamics simulations

Understanding the excited state dynamics of donor-acceptor (D-A) complexes is of fundamental importance both experimentally and theoretically. Herein, we have first explored the photoinduced dynamics of a recently synthesized paddle-wheel BODIPY-hexaoxatriphenylene (BODIPY is the abbreviation for BF2-chelated dipyrromethenes) conjugates D-A complexes with the combination of both electronic structure calculations and non-adiabatic dynamics simulations. On the basis of computational results, we concluded that the BODIPY-hexaoxatriphenylene (BH) conjugates will be promoted to the local excited (LE) states of the BODIPY fragments upon excitation, which is followed by the ultrafast exciton transfer from LE state to charge transfer (CT). Instead of the photoinduced electron transfer process proposed in previous experimental work, such a exciton transfer process is accompanied with the photoinduced hole transfer from BODIPY to hexaoxatriphenylene. Additionally, solvent effects are found to play an important role in the photoinduced dynamics. Specifically, the hole transfer dynamics is accelerated by the acetonitrile solvent, which can be ascribed to significant influences of the solvents on the charge transfer states, i.e. the energy gaps between LE and CT excitons are reduced greatly and the non-adiabatic couplings are increased in the meantime. Our present work not only provides valuable insights into the underlying photoinduced mechanism of BH, but also can be helpful for the future design of novel donor-acceptor conjugates with better optoelectronic performance.

BODIPY Cored A-D-A'-D-A Type Nonfused-Ring Electron Acceptor for Efficient Polymer Solar Cells

In this work, boron dipyrromethene (BODIPY) is for the first time employed as electron-deficient core (A') to construct an A-D-A'-D-A type nonfused-ring electron acceptor (NFREA) for polymer solar cells (PSCs). Among, cyclopentadithiophene (CPDT) and fluorinated dicyanoindanone (DFIC) are involved as electron-donating (D) bridges and terminal A groups, respectively. Bearing with the steric BODIPY core, tMBCIC exhibits twisted configuration with dihedral angles >45^o  between BODIPY and CPDT bridges. Thus, compared with the BODIPY-free planar A-D-D-A structured bCIC, reduced aggregation, weakened intramolecular D-A interactions with up-shifted LUMO by 0.4 eV as well as blue-shifted absorption by up to 150 nm is observed in tMBCIC. Moreover, owing to the intrinsic large molar extinction coefficient from BODIPY, promoted light-harvest ability is achieved for tMBCIC, particularly in its blend films. Therefore, PSCs by using PBDB-T as donor, tMBCIC as NFREA afford superior power conversion efficiency (PCE) of 9.22% and higher open-circuit voltage (V_oc ) of 0.954 V compared to 4.47% and 0.739 V from bCIC-devices. Moreover, compared to other BODIPY-flanked electron acceptors (<5%) reported so far, BODIPY-cored tMBCIC realizes a remarkable progress in PCE. This article is protected by copyright. All rights reserved.

Accurate predictions of the electronic excited states of BODIPY based dye sensitizers using spin-component-scaled double-hybrid functionals: a TD-DFT benchmark study

The vertical excitation energies of 13 BODIPY based dye sensitizers are benchmarked by means of TD-DFT, using 36 functionals from different DFT rungs. Most TD-DFT results were found to overestimate the excitation energies, and show mean absolute error (MAE) values in the range 0.2–0.5 eV. The dispersion-corrected, spin-component-scaled, double-hybrid (DSD) functionals DSD-BLYP and DSD-PBEP86 were found to have the smallest MAE values of 0.083 eV and 0.106 eV, respectively, which is close to the range of average errors found in the more expensive coupled-cluster methods. Moreover, DSD-BLYP and DSD-PBEP86 functionals show excellent consistency and quality of results (standard deviation = 0.048 eV and 0.069 eV respectively). However, the range separated hybrid (RSH) and the range separated double hybrid (RSDH) functionals were found to provide the best predictability (linear determination coefficient R² > 0.97 eV).

The excitation energies of 13 BODIPY dye sensitizers are benchmarked by means of TD-DFT, using 36 functionals. Spin-component-scaled double-hybrid (DSD) functionals are found to show the best performance.

Synthesis and photophysical properties of novel oxadiazole substituted BODIPY fluorophores

Using 3-phenyl-5-(5-phenyl-1H-pyrrol-3-yl)-1,2,4-oxadiazole, BODIPYs with the oxadiazole groups at the 1,7-positions were prepared and their photophysical properties were characterized.

BODIPY and Dipyrrin as Unexpected Robust Anchoring Groups on TiO2 Nanoparticles

Covalent attachment of molecules to metal oxide surfaces typically demands the presence of an anchoring group that in turn requires synthetic steps to introduce. BODIPY (4,4-difluoro-4-bora-3a,4a-diaza-s-indacene) chromophores have long been...

Iodine(III)-promoted regioselective and efficient synthesis of β-triazolyl BODIPYs for the selective recognition of nickel ion and bovine serum albumin

Various ꞵ-triazolyl tethered BODIPYs were efficiently prepared in a sequential one-pot protocol involving the initial reaction of BODIPY with iodobenzene diacetate (IBD) and sodium azide to in situ generate BODIPY...

2-(4-(Dimethylamino)phenyl)-3,3-difluoro-4,6-diphenyl-3,4-dihydro-1,2,4,5,3-tetrazaborinin-2-ium-3-ide

Reaction of 1-(4-(dimethylamino)phenyl)-3,5-diphenylformazane with boron trifluoride diethyl etherate (5 equiv) in the presence of triethylamine (3 equiv) in toluene medium gave “boratetrazine”—2-(4-(dimethylamino)phenyl)-3,3-difluoro-4,6-diphenyl-3,4-dihydro -1,2,4,5,3-tetrazaborinin-2-ium-3-ide in a 58% yield.

Donor-Acceptor Boron-Ketoiminate Complexes with Pendent N-Heterocyclic Arms: Switched-on Luminescence through N-Heterocycle Methylation

A series of intramolecular, donor-stabilized BF₂ complexes supported by phenanthridinyl-decorated, β-ketoiminate chelating ligand scaffolds is described, along with their characterization by spectroscopy and X-ray diffraction. In solution, the relative orientation of the pendent phenanthridinyl arm is fixed despite not coordinating to the boron center, and a well-resolved through-space interaction between a phenanthridinyl C-H and a single fluorine atom can be observed by ¹⁹F-¹H NOE NMR spectroscopy. The neutral compounds are nonetheless only weakly luminescent in fluid solution, ascribed to nonradiative decay pathways enabled by rotation of the N-heterocyclic unit. Methylation of the phenanthridinyl nitrogen restricts this rotation, "switching on" comparably strong emission in solution. Modeling by density functional theory (DFT) and time-dependent DFT (TDDFT) indicates that the character of the lowest energy excitation changes upon methylation, with shallow calculated potential energy surfaces of the neutral complexes consistent with their lack of significant radiative decay.

Ratiometric Fluorescence Acid Probes Based on a Tetrad Structure Including a Single BODIPY Chromophore

A series of tetrad BODIPY derivatives were synthesized. Each molecule was shown to contain phenyl groups at the 1- and 7-positions and a pyridyl or quinolyl group at the 8-position of the BODIPY chromophore. They exhibited fluorescence shifts in the presence of acids. These results imply the importance of controlled conjugation as well as shielding of the meso-substituent from solvents to achieve fluorescence shifts and efficiency through a tetrad structure including a single boron dipyrromethenes (BODIPY) chromophore.

Organoboron molecules and polymers for organic solar cell applications

Organic solar cells (OSCs) are emerging as a new photovoltaic technology with the great advantages of low cost, light-weight, flexibility and semi-transparency. They are promising for portable energy-conversion products and building-integrated photovoltaics. Organoboron chemistry offers an important toolbox to design novel organic/polymer optoelectronic materials and to tune their optoelectronic properties for OSC applications. At present, organoboron small molecules and polymers have become an important class of organic photovoltaic materials. Power conversion efficiencies (PCEs) of 16% and 14% have been realized with organoboron polymer electron donors and electron acceptors, respectively. In this review, we summarize the research progress in various kinds of organoboron photovoltaic materials for OSC applications, including organoboron small molecular electron donors, organoboron small molecular electron acceptors, organoboron polymer electron donors and organoboron polymer electron acceptors. This review also discusses how to tune their opto-electronic properties and active layer morphology for enhancing OSC device performance. We also offer our insight into the opportunities and challenges in improving the OSC device performance of organoboron photovoltaic materials.

Probing the Ni2+ -selective Response of Fluorescent Probe NiSensor-1 with the NiCast Photocaged Complex† ‡

CTEA (N,N-bis[2-(carboxylmethyl)thioethyl]amine) is a mixed donor ligand that has been incorporated into multiple fluorescent sensors such as NiSensor-1 that was reported to be selective for Ni²⁺ . Other metal ions such as Zn²⁺ do not produce an emission response in aqueous solution. To investigate the coordination chemistry and selectivity of this receptor, we prepared NiCast, a photocage containing the CTEA receptor. Cast photocages undergo a photoreaction that decreases electron density on a metal-bound aniline nitrogen atom, which shifts the binding equilibrium toward unbound metal ion. The unique selectivity of CTEA was examined by measuring the binding affinity of NiCast and the CTEA receptor for Ni²⁺ , Zn²⁺ , Cd²⁺ and Cu²⁺ under different conditions. In aqueous solution, Ni²⁺ binds more strongly to the aniline nitrogen atom than Cd²⁺ ; however, in CH₃ CN, the change in affinity virtually disappears. The crystal structure of [Cu(CTEA)], which exhibits a Jahn-Teller-distorted square pyramidal structure, was also analyzed to gain more insight into the underlying coordination chemistry. These studies suggest that the fluorescence selectivity of NiSensor-1 in aqueous solution is due to a stronger interaction between the aniline nitrogen atom and Ni²⁺ compared to other divalent metal ions except Cu²⁺ .

Halogen-Bonding Strapped Porphyrin BODIPY Rotaxanes for Dual Optical and Electrochemical Anion Sensing

Anion receptors employing two distinct sensory mechanisms are rare. Herein, we report the first examples of halogen-bonding porphyrin BODIPY [2]rotaxanes capable of both fluorescent and redox electrochemical sensing of anions. 1 H NMR, UV/visible and electrochemical studies revealed rotaxane axle triazole group coordination to the zinc(II) metalloporphyrin-containing macrocycle component, serves to preorganise the rotaxane binding cavity and dramatically enhances anion binding affinities. Mechanically bonded, integrated-axle BODIPY and macrocycle strapped metalloporphyrin motifs enable the anion recognition event to be sensed by the significant quenching of the BODIPY fluorophore and cathodic perturbations of the metalloporphyrin P/P+. redox couple.

Excited-State Dynamics and Nonlinear Optical Properties of Hyperpolarizable Chromophores Based on Conjugated Bis(terpyridyl)Ru(II) and Palladium and Platinum Porphyrinic Components: Impact of Heavy Metals upon Supermolecular Electro-Optic Properties

A new series of strongly coupled oscillators based upon (porphinato)Pd, (porphinato)Pt, and bis(terpyridyl)ruthenium(II) building blocks is described. These RuPPd, RuPPt, RuPPdRu, and RuPPtRu chromophores feature bis(terpyridyl)Ru(II) moieties connected to the (porphinato)metal unit via an ethyne linker that bridges the 4'-terpyridyl and porphyrin macrocycle meso-carbon positions. Pump-probe transient optical data demonstrate sub-picosecond excited singlet-to-triplet-state relaxation. The relaxed lowest-energy triplet (T₁) excited states of these chromophores feature absorption manifolds that span the 800-1200 nm spectral region, microsecond triplet-state lifetimes, and large absorptive extinction coefficients [ε(T₁ → T_n) > 4 × 10⁴ M^-1 cm^-1]. Dynamic hyperpolarizability (β_λ) values were determined from hyper-Rayleigh light scattering (HRS) measurements carried out at several incident irradiation wavelengths over the 800-1500 nm spectral region. Relative to benchmark RuPZn and RuPZnRu chromophores which showed large β_HRS values over the 1200-1600 nm range, RuPPd, RuPPt, RuPPdRu, and RuPPtRu displayed large β_HRS values over the 850-1200 nm region. Generalized Thomas-Kuhn sum (TKS) rules and experimental hyperpolarizability values were utilized to determine excited state-to-excited state transition dipole terms from experimental electronic absorption data and thus assessed frequency-dependent β_λ values, including two- and three-level contributions for both β_zzz and β_xzx tensor components to the RuPPd, RuPPt, RuPPdRu, and RuPPtRu hyperpolarizability spectra. These analyses qualitatively rationalize how the β_zzz and β_xzx tensor elements influence the observed irradiation wavelength-dependent hyperpolarizability magnitudes. The TKS analysis suggests that supermolecules related to RuPPd, RuPPt, RuPPdRu, and RuPPtRu will likely feature intricate dependences of experimentally determined β_HRS values as a function of irradiation wavelength that derive from substantial singlet-triplet mixing, and complex interactions among multiple different β tensor components that modulate the long wavelength regime of the nonlinear optical response.

Thiophene-Fused BODIPY Dimers and Tetramers from Oxidative Aromatic Couplings as Near-Infrared Dyes

We describe a straightforward, postmodification synthesis for a family of thiophene-fused BODIPY dimers and tetramers through transforming flexible sulfur bridges into coplanar thiophene fusions. FeCl₃ was used as a bifunctional oxidant for both intramolecular and intermolecular oxidative aromatic coupling reactions. Oxidative fusion and dimerization gave strong red-shift absorptions from 509 nm for a BODIPY monomer to 830 nm for a tetramer.

Strategic Construction of Sulfur-Bridged BODIPY Dimers and Oligomers as Heavy-Atom-Free Photosensitizers

An efficient strategy for building sulfur-bridged oligo-BODIPYs based on the S_NAr reaction is described. These oligo-BODIPYs showed broadband and strong visible-near-infrared (NIR) light absorption, strong intramolecular exciton coupling, and efficient intersystem crossing (ISC). Generation of ¹O₂ as well as O₂^•- under irradiation was found to give high reactive oxygen species generation efficiencies for those oligomers.

BODIPY trimer with 1,3,5-triazine core: Facile synthesis and crystal structure

Trimerization reaction of 8-(4[Formula: see text]-cyanophenyl)-1,3,5,7-tetramethyl-4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (CN-BODIPY) led to the isolation of a new triazine-based BODIPY trimer 2,4,6-tris(8[Formula: see text]-phenyl-1[Formula: see text],3[Formula: see text],5[Formula: see text],7[Formula: see text]-tetramethyl-4[Formula: see text],4[Formula: see text]-difluoro-4[Formula: see text]-bora-3a[Formula: see text],4a[Formula: see text]-diaza-s-indacene)-1,3,5-triazine (1). This BODIPY trimer 1 have been characterized by a series of spectroscopic methods including MALDI-TOF mass, 1H NMR, electronic absorption, IR and fluorescence spectroscopy. In particular, the single crystals of 1 have be obtained by slow diffusion of methanol into the solution of this compound in CHCl3. The BODIPY trimer structure of 1 with a triazine core has been directly revealed on the basis of single crystal X-ray diffraction analysis with the intermolecular interactions investigated by Hirshfeld surface analysis. This work will be helpful for the design and synthesis of new multiple BODIPY derivatives with various application.

BOSHPY Fluorophores: BODIPY Analogues with Single Atom Controlled Aggregation

The reaction of diiminoisoindoline and iminoxoisoindoline with aminoazoles results in the formation of bidentate chelates that can be considered a semihemiporphyrazine. These chelates react with BF₃ to produce fluorescent compounds that are structurally analogous to the BODIPY dyes. These difluoroboron semihemiporphyrazines (BOSHPYs) aggregate, and the type of aggregation (H or J) is determined by a single atom at the periphery of the ligand (O or N). Notably, the imine terminated compounds remain fluorescent upon aggregation.

BOPYIN-anil and BOPYIN-boranil complex: Synthesis, spectroscopic properties and ESIPT process

Two BOPYIN dyes (W-1 and W-2) were synthesized, and their structural and photophysical properties were investigated. The absorption bands of both dyes located at ca. 350 and 500 nm in diverse solvents. The absorption profiles are a linear combination of those of the BOPYIN core and the boranil or anil subunits. Their emission spectra were observed at ca. 565 and 540 nm with 14.2% and 77% quantum yield in CHCl3, respectively. The absorption, excitation and emission spectra for both dyes confirm that the boranil or anil moieties could be used as an input energy antenna for cascade energy transfer to the fluorescent BOPYIN residue at 540 nm. Subsequently, ESIPT process of W-1 is fast and more likely to occur in non-polar solvent investigated by DFT calculation.

A turn-on homodimer fluorescent probe based on homo-FRET for the sensing of biothiols in lysosome: a trial of a new turn-on strategy

Fluorescence resonance energy transfer (FRET) is often applied to construct fluorescent probes for acquiring high selectivity and sensitivity. According to the FRET theory, a homodimer composed of two identical fluorophores with a small Stokes shift has only weak fluorescence due to homo-FRET between fluorophores, and the fluorescence could be recovered after the destruction of the homodimer. In this study, we designed and synthesized a homodimer fluorescent probe, namely 1,3,5,7-tetramethyl-8-(4'-phenylthiophenol)-boron difluoride-dipyrrole methane dimer (D-TMSPB), based on this turn-on strategy. In D-TMSPB, the disulfide moiety was selected as the response moiety of biothiols, and BODIPY fluorophore was chosen as both donor and acceptor in FRET due to the ultra-small Stokes shifts and obvious overlap of its excitation/emission peak. D-TMSPB exhibited only weak fluorescence. After selective reaction with biothiols, FRET was destroyed and the derivative exhibited strong fluorescence at 514 nm with the limit of detection of about 0.15 μM for GSH. Notably, the derivative of biothiols shows remarkable fluorescence only in acidic conditions, which accords with the internal environment of lysosome. Thus, D-TMSPB was applied to image the biothiols of lysosome in living cells. The turn-on fluorescence of D-TMSPB indicated that homo-FRET is a practical strategy to design turn-on fluorescent probes, particularly for the sensing mechanism based on leaving groups.

Amphiphilic BODIPY-based nanoparticles as "light-up" fluorescent probe for PAEs detection by an aggregation/disaggregation approach

Phthalic acid eaters (PAEs) play the role of plasticizer and have been widely used in the industrial and plastic production process. But due to not chemically bound in the polymeric matrix, PAEs can be easily released directly and/or indirectly into the environment, and pose a threat the ecosystem and human health. Small-molecule self-assembled nanoparticles have drawn more and more attention due to advantages of precise molecular structure, biocompatibility, great diversity, and tunability in optical properties and functionalities. Here we report the use of disaggregation-induced emission (DIE) based supramolecular assembly to design organic nanoprobe for detection PAEs. In the water solution, the designed small organic fluorophore AJ-1 was aggregated via noncovalent forces to form fluorescence off nanoparticles, but in the presence of PAEs, they disaggregated and produced a clear light-up fluorescent signal. The detection of PAEs with selectivity, sensitivity and rapid response were further achieved. The experiment of recovery of PAEs in real-water sample illustrated the practicability of probe AJ-1 in real-world applications. Besides, cellular uptake assay suggested that AJ-1 could pass through membrane and gather in the cytoplasm.

Near-Infrared absorbing J-Aggregates of boron dipyrromethene for high efficient photothermal therapy

Constructing bioactive materials remains a big challenge through the aggregates of molecules. Herein, a boron dipyrromethene (BODIPY) derivative containing three nitro groups (BDP-(NO₂)₃) was synthesized, which displays the characteristic of J-aggregate with pronounced red-shifted absorption in nonpolar solvent and aqueous media. The bathochromic shift from 635 to 765 nm facilitates photothermal transition upon the irradiation of near-infrared (NIR) light. Interestingly, BDP-(NO₂)₃ nanoparticles (NPs) fabricated from BDP-(NO₂)₃ and poly(oxyethylene)-poly(oxypropylene) copolymer (F-127), still exhibit obvious J-aggregate, which possess the merits of hydrophilicity, NIR absorption, high photothermal conversion efficiency, excellent biosafety, and can behave as unique candidates for photothermal therapy. In vitro and in vivo experiments validate that BDP-(NO₂)₃ NPs can effectively suppress the proliferation of cancer cells and lead to tumor ablation. This assembly method would be a generic and efficient mode for reasonable design of functional nanomaterials, and could inspire more study on aggregates of organic molecules.

Design of BODIPY dyes as triplet photosensitizers: electronic properties tailored for solar energy conversion, photoredox catalysis and photodynamic therapy

BODIPYs are renowned fluorescent dyes with strong and tunable absorption in the visible region, high thermal and photo-stability and exceptional fluorescence quantum yields. Transition metal complexes are the most commonly used triplet photosensitisers, but, recently, the use of organic dyes has emerged as a viable and more sustainable alternative. By proper design, BODIPY dyes have been turned from highly fluorescent labels into efficient triplet photosensitizers with strong absorption in the visible region (from green to orange). In this perspective, we report three design strategies: (i) halogenation of the dye skeleton, (ii) donor-acceptor dyads and (iii) BODIPY dimers. We compare pros and cons of these approaches in terms of optical and electrochemical properties and synthetic viability. The potential applications of these systems span from energy conversion to medicine and key examples are presented.

A static and dynamic NMR study of 10-hydrazino-BODIPY

10-Hydrazino-BODIPY, BoNHNH₂ , presents slow rotation about the C10-NH bond that results in anisochronous ¹ H and ¹³ C NMR signals. The assignment of the different signals has been made using traditional two-dimensional methods as well as spin-spin coupling constants and confirmed by DFT calculations (B3LYP) using the 6-311++G(d,p) basis set. The rotational barrier has been determined in three pairs of proton signals and compared with the calculated barrier.

The TDDFT Excitation Energies of the BODIPYs; The DFT and TDDFT Challenge Continues

The derivatives of 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) are pivotal ingredients for a large number of functional, stimuli-responsive materials and therapeutic molecules based on their photophysical properties, and there is a urgent need to understand and predict their optical traits prior to investing a large amount of resources in preparing them. Density functional theory (DFT) and time-dependent DFT (TDDFT) computations were performed to calculate the excitation energies of the lowest-energy singlet excited state of a large series of common BODIPY derivatives employing various functional aiming at the best possible combination providing the least deviations from the experimental values. Using the common "fudge" correction, a series of combinations was investigated, and a methodology is proposed offering equal or better performances than what is reported in the literature.

A multiple acetal chalcone-BODIPY-based fluorescence: synthesis, physical property, and biological studies

Fluorescent probes with outstanding physical and biological properties are superior for functional fluorescent dyes design. However, few studies pay attention to the stability of specific groups in fluorescent probes. The aldehyde group in the fluorescent probe is highly active but unstable under certain conditions. Therefore, we introduced ethoxy groups to realize the conversion to aldehyde groups under acidic conditions and avoid the instability of straightforward aldehyde groups. In this work, two fluorophores based on the multi acetal difluoroboraindacene (BODIPY) units with combination of the pharmaceutical intermediate chalcone have been firstly developed. In the design part, chalcone was introduced as a medium for fluorophore and multiple acetal. The mild synthesis strategy is based on the ligand ((Z)-2-chloro-1-(difluoroboranyl)-5-((4-ethyl-3,5-dimethyl-2H-pyrrol-2-ylidene)(phenyl)methyl)-1H-pyrrole) and connects with chalcone in (2E,2'E)-3,3'-(1,3-phenylene)bis(1-(2,4-bis(2,2-diethoxyethoxy)phenyl)prop-2-en-1-one). The emission wavelengths of the products are around 530 nm with high fluorescence intensity. To highlight the biological characteristics of these novel BODIPY fluorescents, we further demonstrated biological analysis studies on MTT and flow cytometry assays. The IC₅₀ values of BODIPY 5 ranged from 79 ± 6.11 to 63 ± 5.67 μM and BODIPY 6 were found to be 86 ± 4.07 to 58 ± 10.51 μM in tested cell lines. Flow cytometry data analysis shows that the representative agent 6 and reference have similar rational apoptosis rates in first quadrant. Last but not least, 6 shows outstanding biological compatibility and cell imaging potential in live cell imaging and in vivo assay, not only is the fluorescence prominent enough, but also rapidly distributes. Thus, our study reports a mild synthesis strategy and full biological analysis on BODIPY fluorescents, and the subtle modulation of the physical and biological properties by pharmaceutical substituents makes these designed chalcone-BODIPY-based dyes hopeful to realize drug functional fluorescent dyes. Two new highly sensitive BODIPY fluorophores are synthesized based on the ligand ((Z)-2-chloro-1-(difluoroboranyl)-5-((4-ethyl-3,5-dimethyl-2H-pyrrol-2-ylidene)(phenyl)methyl)-1H-pyrrole), which connects with chalcone in (2E,2'E)-3,3'-(1,3/4-phenylene)bis(1-(2,4-bis(2,2-diethoxyethoxy)phenyl)prop-2-en-1-one). Multiple acetals were introduced and the physical and biological properties of BODIPYs are described with MTT assay and in vitro and in vivo imaging.

Regioisomeric BODIPY derivatives: second-order nonlinear optical properties under an external electric field

 The present work aims to study the second-order NLO properties of m-AD and p-AD regioisomers. The β_tot value of p-AD is larger than that of m-AD. Significantly, the external electric field effectively regulates the β_tot values (0–3.70 × 10⁴ a.u.) of p-AD.

Rhodium-catalyzed annulation of pyrrole substituted BODIPYs with alkynes to access π-extended polycyclic heteroaromatic molecules and NIR absorption

A series of π-extended BODIPY derivatives fused with an indolizine scaffold were prepared smoothly via rhodium-catalyzed C–H functionalization/annulation. These fluorophores show significantly red-shifted absorption, reaching to the near infrared (NIR) region.

Synthesis pathways for the preparation of the BODIPY analogues: aza-BODIPYs, BOPHYs and some other pyrrole-based acyclic chromophores

This mini-review summarizes the synthesis strategies for the preparation and post-functionalization of aza-BODIPYs, BOPHYs, “half-Pcs”, biliazines, MB-DIPYs, semihemiporphyrazines, BOIMPYs, BOPPYs, BOPYPYs, BOAHYs, and BOAPYs.

BODIPY-Based Molecules, a Platform for Photonic and Solar Cells

The 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY)-based molecules have emerged as interesting material for optoelectronic applications. The facile structural modification of BODIPY core provides an opportunity to fine-tune its photophysical and optoelectronic properties thanks to the presence of eight reactive sites which allows for the developing of a large number of functionalized derivatives for various applications. This review will focus on BODIPY application as solid-state active material in solar cells and in photonic devices. It has been divided into two sections dedicated to the two different applications. This review provides a concise and precise description of the experimental results, their interpretation as well as the conclusions that can be drawn. The main current research outcomes are summarized to guide the readers towards the full exploitation of the use of this material in optoelectronic applications.

Architectures and Applications of BODIPY-Based Conjugated Polymers

Conjugated polymers generally contain conjugated backbone structures with benzene, heterocycle, double bond, or triple bond, so that they have properties similar to semiconductors and even conductors. Their energy band gap is very small and can be adjusted via chemical doping, allowing for excellent photoelectric properties. To obtain prominent conjugated materials, numerous well-designed polymer backbones have been reported, such as polyphenylenevinylene, polyphenylene acetylene, polycarbazole, and polyfluorene. 4,4'-Difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY)-based conjugated polymers have also been prepared owing to its conjugated structure and intriguing optical properties, including high absorption coefficients, excellent thermal/photochemical stability, and high quantum yield. Most importantly, the properties of BODIPYs can be easily tuned by chemical modification on the dipyrromethene core, which endows the conjugated polymers with multiple functionalities. In this paper, BODIPY-based conjugated polymers are reviewed, focusing on their structures and applications. The forms of BODIPY-based conjugated polymers include linear, coiled, and porous structures, and their structure-property relationship is explored. Also, typical applications in optoelectronic materials, sensors, gas/energy storage, biotherapy, and bioimaging are presented and discussed in detail. Finally, the review provides an insight into the challenges in the development of BODIPY-based conjugated polymers.

Recent Progress in Small Spirocyclic, Xanthene-Based Fluorescent Probes

The use of fluorescent probes in a multitude of applications is still an expanding field. This review covers the recent progress made in small molecular, spirocyclic xanthene-based probes containing different heteroatoms (e.g., oxygen, silicon, carbon) in position 10'. After a short introduction, we will focus on applications like the interaction of probes with enzymes and targeted labeling of organelles and proteins, detection of small molecules, as well as their use in therapeutics or diagnostics and super-resolution microscopy. Furthermore, the last part will summarize recent advances in the synthesis and understanding of their structure-behavior relationship including novel computational approaches.

Selective Butyrate Esterase Probe for the Rapid Colorimetric and Fluorogenic Identification of Moraxella catarrhalis

Clinical identification of the pathogenic bacterium Moraxella catarrhalis in cultures relies on the detection of bacterial butyrate esterase (C4-esterase) using a coumarin-based fluorogenic substrate, 4-methylumbelliferyl butyrate. However, this classical probe may give false-positive responses because of its poor stability and lack of specificity. Here, we report a new colorimetric and fluorogenic probe design employing a meso-ester-substituted boron dipyrromethene (BODIPY) dye for the specific detection of C4-esterase activity expressed by M. catarrhalis. This new probe has resistance to nonspecific hydrolysis that is far superior to the classical probe and also selectively responds to esterase with rapid colorimetric and fluorescence signal changes and large "turn-on" ratios. The probe was successfully applied to the specific detection of M. catarrhalis with high sensitivity.