Development of stir bar sorptive-dispersive microextraction mediated by magnetic nanoparticles and its analytical application to the determination of hydrophobic organic compounds in aqueous media

In situ generation of hydrophobic magnetic ionic liquids in stir bar dispersive liquid-liquid microextraction coupled with headspace gas chromatography

For the first time, an in situ stir bar dispersive liquid-liquid microextraction approach has been developed and coupled with headspace gas chromatography-mass spectrometry for the determination of a group of organic pollutants. The method exploits a new generation of magnetic ionic liquids (MILs) that contain paramagnetic cations based on Ni²⁺ or Co²⁺ metal centers coordinated with either N-butylimidazole or N-octylimidazole ligands and chloride anions. The reactants are added to an aqueous solution containing a high field neodymium rod magnet, followed by the addition of the bis[(trifluoromethyl)sulfonyl]imide anion that promotes a metathesis reaction for the in situ generation of a hydrophobic MIL. Concurrently, a high stirring rate is maintained to exceed the magnetic field of the rod magnet and disperse the generated MIL in the sample solution. When stirring is stopped, the MIL coats the rod magnet due to its paramagnetic nature, facilitating the MIL transfer and subsequent desorption and analysis. Under optimum conditions, the method required a 2.5-18% (w/v) aqueous solution of sodium chloride, 10 mL of sample, 20 or 30 mg of MIL, the addition of a small volume of dispersive solvent, and stirring for 5-7.5 min, depending on the MIL. The method provided limits of detection (LODs) down to 10 μg L^-1, adequate reproducibility (with relative standard deviation values lower than 10% for a spiked level of 80 μg L^-1), and relative recoveries between 72.5% and 102%. Furthermore, the method was successfully applied in the analysis of tap and mineral water.

Magnetic molecularly imprinted polymer nanoparticles for simultaneous extraction and determination of 6-mercaptopurine and its active metabolite thioguanine in human plasma

Cytotoxic drugs used in cancer chemotherapy require the continuous monitoring of their plasma concentration levels for dose adjustment purposes. Such condition necessitates the presence of a sensitive technique for accurate extraction and determination of these drugs together with their active metabolites. In this study a novel solid phase extraction technique using magnetic molecularly imprinted nanoparticles (MMI-SPE) is combined with liquid chromatography tandem mass spectrometry (LC-MS/MS) to extract and determine the anti-leukemic agent; 6-mercaptopurine (6-MP) and its active metabolite thioguanine (TG) in human plasma. The magnetic molecularly imprinted nanoparticles (Fe₃O₄@MIP NPs) were synthesized via precipitation polymerization technique and were characterized using different characterization methods A computational approach was adopted to help in the choice of the monomer used in the fabrication process. The Fe₃O₄@MIPs NPs possessed a highly improved imprinting efficiency, fast adsorption kinetics following 2nd order kinetics and good adsorption capacity of 1.0 mg/g. The presented MMI-SPE provided the optimum approach in comparison to other reported ones to achieve good extraction recovery and matrix effect of trace levels of 6-MP and TG from plasma. Chromatographic separation was carried out using a validated LC-MS/MS assay and recovery, matrix effect and process efficiency were evaluated. Recovery of 6-MP and TG was in the range of 85.94-103.03%, while, matrix effect showed a mean percentage recovery of 85.94-97.62% and process efficiency of 85.54-96.18%. The proposed extraction technique is simple, effective and can be applicable to the extraction and analysis of other pharmaceutical compounds in complex matrices for therapeutic drug monitoring applications.

In Situ Miniaturised Solid Phase Extraction (m-SPE) for Organic Pollutants in Seawater Samples

Solid phase extraction (SPE) is a consolidated technique for determining pollutants in seawater samples. The current tendency is to miniaturise systems that extract and determine pollutants in the environment, reducing the use of organic solvents, while maintaining the quality in the extraction and preconcentration. On the other hand, there is a need to develop new extraction systems that can be fitted to in situ continual monitoring buoys, especially for the marine environment. This work has developed a first model of a low-pressure micro-SPE (m-SPE) for persistent organic pollutants (POPs) that can be simply applied to in situ monitoring in the marine environment. This system reduces the volumes of sample and solvents required in the laboratory in comparison with conventional SPE. In the future, it could be used in automated or robotic systems in marine technologies such as marine gliders and oceanographic buoys. This system has been optimised and validated to determine polycyclic aromatic hydrocarbons (PAH) in seawater samples, but it could also be applied to other kinds of persistent organic pollutants (POPs) and emerging pollutants.

Ionic liquid-modified luffa sponge fibers for dispersive solid-phase extraction of benzoylurea insecticides from water and tea beverage samples

Ionic liquid-modified luffa sponge fibers were used as efficient and environmentally friendly sorbents in the dispersive solid-phase extraction method.

Computer-aided design of magnetic molecularly imprinted polymer nanoparticles for solid-phase extraction and determination of levetiracetam in human plasma

Analytical methods should be accurate and specific to measure plasma drug concentration. Nevertheless, current sample preparation techniques suffer from limitations, including matrix interference and intensive sample preparation. In this study, a novel technique was proposed for the synthesis of a molecularly imprinted polymer (MIP) on magnetic Fe₃O₄ nanoparticles (NPs) with uniform core–shell structure. The Fe₃O₄@MIPs NPs were then applied to separate and enrich an antiepileptic drug, levetiracetam, from human plasma. A computational approach was developed to screen the functional monomers and polymerization solvents to provide a suitable design for the synthesized MIP. Different analysis techniques and re-binding experiments were performed to characterize the Fe₃O₄@MIP NPs, as well as to identify optimal conditions for the extraction process. Adsorption isotherms were best fitted to the Langmuir model and adsorption kinetics were modeled with pseudo-second-order kinetics. The Fe₃O₄@MIP NPs showed reasonable adsorption capacity and improved imprinting efficiency. A validated colorimetric assay was introduced as a comparable method to a validated HPLC assay for the quantitation of levetiracetam in plasma in the range of 10–80 μg mL⁻¹ after extraction. The results from the HPLC and colorimetric assays showed good precision (between 1.08% and 9.87%) and recoveries (between 94% and 106%) using the Fe₃O₄@MIP NPs. The limit of detection and limit of quantification were estimated to be 2.58 μg mL⁻¹ and 7.81 μg mL⁻¹, respectively for HPLC assay and 2.32 μg mL⁻¹ and 7.02 μg mL⁻¹, respectively for colorimetric assay. It is believed that synthesized Fe₃O₄@MIP NPs as a sample clean-up technique combined with the proposed assays can be used for determination of levetiracetam in plasma.

A novel molecularly imprinted polymer on Fe₃O₄ nanoparticles was applied to extract antiepileptic drug; levetiracetam from plasma for TDM purposes.

Graphene oxide reinforced ionic liquid-functionalized adsorbent for solid-phase extraction of phenolic acids

An environmental friendly sorbent of polymeric ionic liquids modified graphene oxide-grafted silica (PILs@GO@Sil) was synthesized for solid-phase extraction (SPE) of phenolic acids. The sorbent was prepared via a chemical layer-to-layer fabrication including amidation reaction, surface radical chain-transfer polymerization and in situ anion exchange. After modification with PILs, the silica surface had higher positive potential so that it would exhibit stronger electrostatic interaction for acidic compounds compared with GO@Sil. The adsorption performance of phenolic acids was investigated through the theoretical calculation and static, kinetic state adsorption experiments. Under the optimized conditions, wide linear ranges were obtained with correlation coefficients ranging from 0.9912 to 0.9998, and limits of detection were in the range of 0.20-0.50μgL^-1. Compared with other reported methods, the proposed PILs@GO@Sil-SPE-HPLC showed higher extraction efficiency. Finally, the black wolfberry yogurt and urine were analyzed as real samples and good recoveries spiked with standard solution were obtained.

Coupling of transient near infrared photonic with magnetic nanoparticle for potential dissipation-free biomedical application in brain

Combined treatment strategies based on magnetic nanoparticles (MNPs) with near infrared ray (NIR) biophotonic possess tremendous potential for non-invasive therapeutic approach. Nonetheless, investigations in this direction have been limited to peripheral body region and little is known about the potential biomedical application of this approach for brain. Here we report that transient NIR exposure is dissipation-free and has no adverse effect on the viability and plasticity of major brain cells in the presence or absence superparamagnetic nanoparticles. The 808 nm NIR laser module with thermocouple was employed for functional studies upon NIR exposure to brain cells. Magnetic nanoparticles were characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD), dynamic laser scattering (DLS), and vibrating sample magnetometer (VSM). Brain cells viability and plasticity were analyzed using electric cell-substrate impedance sensing system, cytotoxicity evaluation, and confocal microscopy. When efficacious non-invasive photobiomodulation and neuro-therapeutical targeting and monitoring to brain remain a formidable task, the discovery of this dissipation-free, transient NIR photonic approach for brain cells possesses remarkable potential to add new dimension.

Preparation of a graphene oxide/silica composite modified with nitro-substituted tris(indolyl)methane as a solid-phase extraction sorbent for the extraction of organic acids

This paper describes the use of graphene oxide/silica modified with nitro-substituted tris(indolyl)methane as a solid-phase extraction sorbent for the determination of organic acids. The resultant graphene oxide/silica modified with nitro-substituted tris(indolyl)methane was characterized by FTIR spectroscopy and adsorption experiments. Solid-phase extraction parameters such as sorbent type, sample solution pH, sample loading rate, eluent salt concentration, eluent methanol concentration, elution rate, sample loading, and elution volume were optimized. The method showed good precision, accuracy, sensitivity, and linear response for organic acids analysis over a concentration range of 1-100 μg/L for benzoic acid, p-methoxybenzoic acid, and salicylic acid and 5-100 μg/L for the remaining organic acids (cinnamic acid, p-chlorobenzoic acid, and p-bromobenzoic acid) with coefficients of determination (r(2) ) of higher than 0.9957. Limits of detection from 0.50 to 1.0 μg/L for six organic acids were achieved. The developed method was successfully applied to determine organic acids in real samples.

Use of oleic-acid functionalized nanoparticles for the magnetic solid-phase microextraction of alkylphenols in fruit juices using liquid chromatography-tandem mass spectrometry

Magnetic nanoparticles of cobalt ferrite with oleic acid as the surfactant (CoFe2O4/oleic acid) were used as sorbent material for the determination of alkylphenols in fruit juices. High sensitivity and specificity were achieved by liquid chromatography and detection using both diode-array (DAD) and electrospray-ion trap-tandem mass spectrometry (ESI-IT-MS/MS) in the selected reaction monitoring (SRM) mode of the negative fragment ions for alkylphenols (APs) and in positive mode for ethoxylate APs (APEOs). The optimized conditions for the different variables influencing the magnetic separation procedure were: mass of magnetic nanoparticles, 50mg, juice volume, 10mL diluted to 25mL with water, pH 6, stirring for 10min at room temperature, separation with an external neodymium magnet, desorption with 3mL of methanol and orbital shaking for 5min. The enriched organic phase was evaporated and reconstituted with 100µL acetonitrile before injecting 30µL into a liquid chromatograph with a mobile phase composed of acetonitrile/0.1% (v/v) formic acid under gradient elution. Quantification limits were in the range 3.6 to 125ngmL(-1). The recoveries obtained were in the 91-119% range, with RSDs lower than 14%. The ESI-MS/MS spectra permitted the correct identification of both APs and APEOs in the fruit juice samples.

Are sunscreens a new environmental risk associated with coastal tourism?

The world coastal-zone population and coastal tourism are expected to grow during this century. Associated with that, there will be an increase in the use of sunscreens and cosmetics with UV-filters in their formulation, which will make coastal regions worldwide susceptible to the impact of these cosmetics. Recent investigations indicate that organic and inorganic UV-filters, as well as many other components that are constituents of the sunscreens, reach the marine environment--directly as a consequence of water recreational activities and/or indirectly from wastewater treatment plants (WWTP) effluents. Toxicity of organic and inorganic UV filters has been demonstrated in aquatic organism. UV-filters inhibit growth in marine phytoplankton and tend to bioaccumulate in the food webs. These findings together with coastal tourism data records highlight the potential risk that the increasing use of these cosmetics would have in coastal marine areas. Nevertheless, future investigations into distribution, residence time, aging, partitioning and speciation of their main components and by-products in the water column, persistence, accumulation and toxicity in the trophic chain, are needed to understand the magnitude and real impact of these emerging pollutants in the marine system.

Advances in analytical methods and occurrence of organic UV-filters in the environment--A review

UV-filters are a group of compounds designed mainly to protect skin against UVA and UVB radiation, but they are also included in plastics, furniture, etc., to protect products from light damage. Their massive use in sunscreens for skin protection has been increasing due to the awareness of the chronic and acute effects of UV radiation. Some organic UV-filters have raised significant concerns in the past few years for their continuous usage, persistent input and potential threat to ecological environment and human health. UV-filters end up in wastewater and because wastewater treatment plants are not efficient in removing them, lipophilic compounds tend to sorb onto sludge and hydrophilics end up in river water, contaminating the existing biota. To better understand the risk associated with UV-filters in the environment a thorough review regarding their physicochemical properties, toxicity and environmental degradation, analytical methods and their occurrence was conducted. Higher UV-filter concentrations were found in rivers, reaching 0.3mg/L for the most studied family, the benzophenone derivatives. Concentrations in the ng to μg/L range were also detected for the p-aminobenzoic acid, cinnamate, crylene and benzoyl methane derivatives in lake and sea water. Although at lower levels (few ng/L), UV-filters were also found in tap and groundwater. Swimming pool water is also a sink for UV-filters and its chlorine by-products, at the μg/L range, highlighting the benzophenone and benzimidazole derivatives. Soils and sediments are not frequently studied, but concentrations in the μg/L range have already been found especially for the benzophenone and crylene derivatives. Aquatic biota is frequently studied and UV-filters are found in the ng/g-dw range with higher values for fish and mussels. It has been concluded that more information regarding UV-filter degradation studies both in water and sediments is necessary and environmental occurrences should be monitored more frequently and deeply.

Automatic In-Syringe Dispersive Microsolid Phase Extraction Using Magnetic Metal-Organic Frameworks

A novel automatic strategy for the use of micro- and nanomaterials as sorbents for dispersive microsolid phase extraction (D-μ-SPE) based on the lab-in-syringe concept is reported. Using the developed technique, the implementation of magnetic metal-organic framework (MOF) materials for automatic solid-phase extraction has been achieved for the first time. A hybrid material based on submicrometric MOF crystals containing Fe3O4 nanoparticles was prepared and retained in the surface of a miniature magnetic bar. The magnetic bar was placed inside the syringe of an automatic bidirectional syringe pump, enabling dispersion and subsequent magnetic retrieval of the MOF hybrid material by automatic activation/deactivation of magnetic stirring. Using malachite green (MG) as a model adsorption analyte, a limit of detection of 0.012 mg/L and a linear working range of 0.04-2 mg/L were obtained for a sample volume equal to the syringe volume (5 mL). MG preconcentration was linear up to a volume of 40 mL, obtaining an enrichment factor of 120. The analysis throughput is 18 h(-1), and up to 3000 extractions/g of material can be performed. Recoveries ranging between 95 and 107% were obtained for the analysis of MG in different types of water and trout fish samples. The developed automatic D-μ-SPE technique is a safe alternative for the use of small-sized materials for sample preparation and is readily implementable to other magnetic materials independent of their size and shape and can be easily hyphenated to the majority of detectors and separation techniques.