Activation of peroxymonosulfate/persulfate by nanomaterials for sulfate radical-based advanced oxidation technologies

Carbon nanotube-based materials for persulfate activation to degrade organic contaminants: Properties, mechanisms and modification insights

Removal of harmful organic matters from environment has great environmental significance. Carbon nanotube (CNT) materials and their composites have been demonstrated to possess excellent catalytic activity towards persulfate (PS) activation for the degradation of organic contaminants. Herein, detailed information concerning the function, modification methods and relevant mechanisms of CNT in persulfate-based advanced oxidation processes (PS-AOPs) for organic pollutant elimination has been reviewed. The activation mechanism of PS by CNT might include radical and nonradical pathways and their synergistic effects. The common strategies to improve the stability and catalytic capability of CNT-based materials have also been put forward. Furthermore, their practical application potential compared with other catalysts has been described. Finally, the challenges faced by CNT in practical application are clearly highlighted. This review should be of value in promoting the research of PS activation by CNT-based materials for degradation of organic pollutants and the corresponding practical applications.

Sonoelectrochemical activation of peroxymonosulfate: Influencing factors and mechanism of FA degradation, and application on landfill leachate treatment

In this work, sonoelectrochemically activated peroxymonosulfate (US-EC/PMS) was used to degrade fulvic acid (FA) in water. Compared with other technologies, the US-EC/PMS system can achieve higher FA decolorization in a short time. Moreover, the benefits of synergy are more prominent in the US-EC/PMS system. The effects of operating parameters on the sonoelectrochemical degradation of FA were investigated, including initial pH, initial FA concentration, current density, ultrasonic power, PMS dosage. The results showed the initial FA concentration and current density were critical to the degradation of FA. Under optimized parameters: initial pH of 2, 50 mg L^-1 initial FA concentration, 30 mA cm^-2 current density, 50 W ultrasonic power, 1 mM PMS dosage, the US-EC/PMS system can achieve 93% FA decolorization. The calculation results of current efficiency and energy consumption indicate that the introduction of PMS into the US-EC system has economic applicability. Scavenger experiments and electron paramagnetic resonance suggest that hydroxyl radicals, sulfate radicals, and singlet oxygen were the main ROS produced in the US-EC/PMS system. Accordingly, the possible mechanism of FA degradation by sonoelectrochemical activation PMS was proposed. Finally, the US-EC/PMS system was used to treat the aged landfill leachate. Three-dimensional fluorescence analysis showed that most of the humic substances (Hss) were effectively removed, and the biodegradability of the leachate was considerably improved. In addition, the effective removal of COD, chroma, and ammonia nitrogen were observed, proving that this technology is a powerful means to treat organic wastewater contaminated by Hss.

Inactivation of E. coli and Streptococcus agalactiae by UV/persulfate during marine aquaculture disinfection

Sulfate radical (•SO₄^-)-based advanced oxidation processes have attracted a great deal of attention for use in water disinfection because of their strong oxidation ability toward electron-rich moieties on microorganism molecules. However, a few studies have focused on the effects of •SO₄^- on pathogenic microorganism inactivation in marine aquaculture water containing various inorganic anions. We employed the gram-negative bacteria E. coli and gram-positive bacteria S. agalactiae as representatives to evaluate the application of UV/persulfate (S₂O₈^2-, PDS), to the disinfection of marine aquaculture water in a comprehensive manner. Total inactivation of 4.13ˍlog of E. coli cells and 4.74ˍlog of S. agalactiae cells was reached within 120 s in the UV/PDS system. The inactivation of pathogenic bacteria in marine aquaculture water increased with the increasing PDS concentration and UV intensity. An acidic pH was beneficial for UV/PDS inactivation. Halogen-free radicals showed a strong influence on the inactivation. Anions in seawater, including Cl^-, Br^-, and HCO₃^- inhibited the disinfection. The inactivation rates of pathogenic bacteria followed the order seawater < marine aquaculture water < freshwater. Pathogenic bacteria could also be effectively inactivated in actual marine aquaculture water and reservoir water. The analysis of the inactivation mechanisms showed that S₂O₈^2- was activated by UV to produce •SO₄^-, which damaged the cell membranes. In addition, antioxidant enzymes, including SOD and CAT, were induced. The genomic DNA was also damaged. Inorganic disinfection byproducts such as chlorate and bromate were not formed during the disinfection of marine aquaculture water, which indicated that UV/PDS was a safe and efficient disinfection method.

Application of Functional Modification of Iron-Based Materials in Advanced Oxidation Processes (AOPs)

Advanced oxidation processes (AOPs) have become a favored approach in wastewater treatment due to the high efficiency and diverse catalyzed ways. Iron-based materials were the commonly used catalyst due to their environmental friendliness and sustainability in the environment. We collected the published papers relative to the application of the modified iron-based materials in AOPs between 1999 and 2020 to comprehensively understand the related mechanism of modified materials to improve the catalytic performance of iron-based materials in AOPs. Related data of iron-based materials, modification types, target pollutants, final removal efficiencies, and rate constants were extracted to reveal the critical process of improving the catalytic efficiency of iron-based materials in AOPs. Our results indicated that the modified materials through various mechanisms to enhance the catalytic performance of iron-based materials. The principal aim of iron-based materials modification in AOPs is to increase the content of available Fe2+ and enhance the stability of Fe2+ in the system. The available Fe2+ is elevated by the following mechanisms: (1) modified materials accelerate the electron transfer to promote the Fe3+/Fe2+ reaction cycle in the system; (2) modified materials form chelates with iron ions and bond with iron ions to avoid Fe3+ precipitation. We further analyzed the effect of different modifying materials in improving these two mechanisms. Combining the advantages of different modified materials to develop iron-based materials with composite modification methods can enhance the catalytic performance of iron-based materials in AOPs for further application in wastewater treatment.

High yield M-BTC type MOFs as precursors to prepare N-doped carbon as peroxymonosulfate activator for removing sulfamethazine: The formation mechanism of surface-bound SO4•- on Co-Nx site

M-BTCs (M = Fe, Co and Mn)/melamine were used to prepare N-doped carbon materials, and their performances as activator of peroxymonosulfate (PMS) for sulfamethazine (SMZ) removal were compared. M-BTC type metal-organic frameworks (MOFs) were synthesized under room temperature, with their yield about 7.5 times of ZIF-67 which is the most used MOFs to prepare N-doped carbon materials as the catalyst of persulfate-based advanced oxidation processes. Co-BTC/melamine derived N-doped carbon materials (Co-BTC/5MNC) performed the best, even better than that of ZIF-67 derived N-doped carbon materials. Initial pH (3-9), 0-10 mM inorganic anions (Cl^-, NO₃^-, HCO₃^- and H₂PO₄^2-) and humic acid (5 and 10 mg/L) had no obvious inhibition on SMZ removal with Co-BTC/5MNC as catalyst. The results of both X-ray photoelectron spectroscopy and density functional theory (DFT) calculations indicated that N-coordinated cobalt single atom site (Co-N_x) was the possible active site of Co-BTC/5MNC. Importantly, surface-bound SO₄^•- was identified as the dominant reactive oxygen species for SMZ removal. The SO₄^•- generated through the charge transfer between PMS and catalyst, and was tightly adsorbed on Co-N_x site.

Efficient peroxymonosulfate (PMS) activation by visible-light-driven formation of polymorphic amorphous manganese oxides

Heterogeneous sulfate radical-based advanced oxidation processes (SR-AOPs) have been widely reported over the last decade as a promising technology for pollutant removal from wastewater. In this study, a novel peroxymonosulfate (PMS) activator was obtained by visible-light-driven Mn(II) oxidation in the presence of nitrate. The photochemically synthesized manganese oxides (PC-MnO_x) were polymorphic amorphous nanoparticles and nanorods, with an average oxidation state of approximately 3.0. It possesses effective PMS activation capacity and can remove 20 mg L^-1 acid organic II (AO7) within 30 min. The AO7 removal performance of PC-MnO_x was slightly decreased in natural waterbodies and in the presence of CO₃^2-, while it showed an anti-interference capacity for Cl^-, NO₃^- and humic acid. Chemical quenching, reactive oxygen species (ROS) trapping, X-ray photoelectric spectroscopy (XPS), in-situ Raman spectroscopy, and electrochemical experiments supported a nonradical mechanism, i.e., electron transfer from AO7 to the metastable PC-MnO_x-PMS complex, which was responsible for AO7 oxidation. The PC-MnO_x-PMS system also showed substrate preferences based on their redox potentials. Moreover, PC-MnO_x could activate periodate (PI) but not peroxydisulfate (PDS) or H₂O₂. Overall, this study provides a new catalyst for PMS activation through a mild and green synthesis approach.

Ultrafast photodegradation of nitenpyram by Ag/Ag3PO4/Zn-Al LDH composites activated by persulfate system: Removal efficiency, degradation pathway and reaction mechanism

In this study, an investigation is conducted into the degradation of nitenpyram (NTP) using highly efficient APMMO/PDS/Vis system. As photocatalysts, silver phosphate (AP) and calcined Zn-Al layered double hydroxides (MMO) exhibit high efficiency in achieving charge separation. Besides, the injection of electrons into peroxydisulfate (PDS) from the APMMO can contribute to obtaining the species in the active state with higher efficiency. Based on the APMMO/PDS/Vis system, 50 mg/L of nitenpyram (NTP, 50 mL) can be completely removed in 60 min using 0.8 g/L photocatalyst and 0.2 g/L PDS under the optimum condition and visible light (780 nm > λ > 420 nm). Meanwhile, as demonstrated under visible light within 30 min, an ultrahigh degradation efficiency can be achieved by NTP based on APMMO1/PDS/Vis system. Besides, the electron paramagnetic resonance (EPR) technique and radical quenching experiments suggested ¹O₂, h⁺, SO₄^-•, •O₂^-, and •OH are all contributory to the removal of pollutants. Given the outcomes achieved by LC/MS system and mass spectrometry, the primary degradation intermediates of NTP end up being converted into photodegradation products (such as 2-Chloropyridine, 6-Chloropurine Riboside and dl-Leucine). Additionally, there are three potential photodegradation pathways to NTP degradation have been deployed. Moreover, the NTP light degradation occurring in APMMO1/PDS/Vis system is competent under the three types of real water sample. Accordingly, the high-efficiency APMMO1/PDS/Vis system is fit for use in water pollution control for agricultural productions.

Recent progress on ultrasound-assisted electrochemical processes: A review on mechanism, reactor strategies, and applications for wastewater treatment

The electrochemical advanced oxidation processes (EAOPs) have received significant attention among the many other water and wastewater treatment technologies. However, achieving a desirable removal effect with a single technique is frequently difficult. Therefore, the integration of ultrasound technique with other processes such as electrocoagulation, electro-Fenton, and electrooxidation is a critical way to achieve effective organic pollutants decomposition from wastewater. This review paper is focused on ultrasound-assisted electrochemical (US/electrochemical) processes, so-called sonoelectrochemical processes of various organic pollutants. Emphasis was given to recently published articles for discussing the results and trends in this research area. The use of ultrasound and integration with electrochemical processes has a synergistic impact owing to the physical and chemical consequences of cavitation, resulting in enhancing the mineralization of organic pollutants. Various types of sonoelectrochemical reactors (batch and continuous) employed in the US/electrochemical processes were reviewed. In addition, the strategies to avoid passivation, enhanced generation of reactive oxygen species, and mixing effect are reviewed. Finally, concluding remarks and future perspectives on this research topic are also explored and recommended.

Prediction of Second-Order Rate Constants of Sulfate Radical with Aromatic Contaminants Using Quantitative Structure-Activity Relationship Model

Predicting the second-order rate constants between aromatic contaminants and a sulfate radical (kSO4•−) is vital for the screening of pollutants resistant to sulfate radical-based advanced oxidation processes. In this study, a quantitative structure-activity relationship (QSAR) model was developed to predict the values for aromatic contaminants. The relationship between logkSO4•− and three molecular descriptors (electron density, steric energy, and ratio between oxygen atoms and carbon atoms) was built through multiple linear regression. The goodness-of-fit, robustness, and predictive ability of the model were characterized statistically with indicators showing that the model was reliable and applicable. Electron density was found to be the most influential descriptor that contributed the most to logkSO4•−. All data points fell within the applicability domain, and no outliers existed in the training set. The comparison with other models indicates that the QSAR model performs well in elucidating the mechanism of the reaction between aromatic compounds and sulfate radicals.

Co2+/PMS based sulfate-radical treatment for effective mineralization of spent ion exchange resin

Sulfate radical advance oxidation processes (SR-AOPs) have attracted a greater attention as a suitable alternative of the hydroxyl radical based advance oxidation process (HR-AOPs). In this study, for the first time we report liquid phase mineralization of nuclear grade cationic IRN-77 resin in Co²⁺/peroxymonosulfate (PMS) based SR-AOPs. After the dissolution of cationic IRN-77 resin, 30 volatile and 15 semi-volatile organic compounds were analyzed/detected using non-targeted GC-MS analysis. The optimal reaction parameters for the highest chemical oxygen demand (COD) removal (%) of IRN-77 resin were determined, and the initial pH, PMS dosage, and reaction temperature were found to be the most influential parameters for the resin degradation. We successfully achieved ∼90% COD removal (1000 mg/L; 1000 ppm) of dissolved spent resin for SR-AOPs by optimizing the reaction parameters as initial pH = 9, Co²⁺ = 4 mM (catalyst), PMS = 60 mM (as oxidant) at 60 °C temperature for 60 min reaction. The electron spin resonance spectroscopy (ESR) spectra confirmed the presence of SO₄^∙- and OH^∙ as main reactive species in the Co²⁺/PMS resin system. In addition, Fourier transform infrared spectroscopy (FT-IR) analyses were used for structural characterization of solid and liquid phase resin samples. We believe that this work will offer a robust approach for the effective treatment of spent resin generated from nuclear industry.

Kinetics and mechanisms of flumequine degradation by sulfate radical based AOP in different water samples containing inorganic anions

Many studies have reported that hydroxyl radical (HO˙) driven advanced oxidation processes (AOPs) could degrade fluoroquinolones (FQs) antibiotics effectively. Compared with HO˙, sulfate radical (SO₄˙⁻) shows a similar oxidation capacity but a longer half-life. SO₄˙⁻ could cause chain reactions and resulted in the generation of halogen radicals and carbonate radicals from the main anions in sea water including Cl⁻, Br⁻ and HCO₃⁻. However, few studies were focused on the degradation of FQs in marine aquaculture water and seawater, as well as the bioaccumulation of transformation products. As a typical member of FQs, flumequine (FLU) was degraded by UV/peroxodisulfate (PDS) AOPs in synthetic fresh water, marine aquaculture water and seawater. The reaction rate constants in the three water samples were 0.0348 min⁻¹, 0.0179 min⁻¹ and 0.0098 min⁻¹, respectively. The reason was attributed to the inhibition of the anions as they could consume SO₄˙⁻ and initiate the quenching reaction of free radicals. When the pH value increased from 5 to 9, the reaction rate decreased from 0.0197 min⁻¹ to 0.0066 min⁻¹. The energy difference between HOMO and LUMO of FLU was calculated to be 8.07 eV indicating that FLU was a stable compound. The atoms on quinolone ring of FLU with high negative charge would be more vulnerable to attack by free radicals through electrophilic reactions. Two possible degradation pathways of FLU were inferred according to the degradation products. Preliminary bioaccumulation analysis of transformation products by the EPI suite software proved that the values of log K_ow and log BCF of the final product P100 were less than those of FLU and the intermediates.

Many studies have reported that hydroxyl radical (HO˙) driven advanced oxidation processes (AOPs) could degrade fluoroquinolones (FQs) antibiotics effectively.

Nitrogen-doped mesoporous carbon material (NCMK-3) as a catalyst for the removal of 4-chlorophenol during persulfate oxidation and its efficiency after reuse

Persulfate (PS) oxidation of 4-chlorophenol (4CP) is mostly catalysed by relatively expensive metal substrates. In this study, we investigated the influence of nitrogen-doped and non-doped mesoporous carbon materials (NCMK-3 and CMK-3) during persulfate (PS) oxidation of 4CP in water. Batch experiments were conducted such that PS was added to simulated contaminant mixture after 1 h agitation with NCMK-3 and CMK-3. Further, the experiment was carried out at different temperatures, pH ranges, concentrations of persulfate (PS), and different doses of NCMK-3, since it recorded better removal rates compared to CMK-3. The results revealed that NCMK-3 and CMK-3 aided the removal of 4CP from water during persulfate oxidation. When persulfate was added after an hour of equilibration with CMK-3 and NCMK-3, 83% and 92% of 4CP were removed within 20 min, respectively, whereas lower removal rates (≤40) were recorded in the absence of persulfate (PS). The removal rates of 4CP increased with an increase in temperature but reduced in the alkaline medium in the NCMK-3/PS system. The efficiency of the NCMK-3 reduced significantly after it was reused three times. Based on the results, NCMK-3 influences the activity of PS oxidation of 4-chlorophenol (4CP) and exhibited a synergistic effect in the removal of the organic contaminant from water.

Synergetic effect of photocatalysis and peroxymonosulfate activated by MIL-53Fe@TiO2 for efficient degradation of tetracycline hydrochloride under visible light irradiation

The MIL-53Fe was prepared by simple solvothermal method, and the MIL-53Fe photocatalysts showed lower photocatalytic activity for the degradation of tetracycline hydrochloride under visible light irradiation. After combined with TiO2,...

Application of CoMn/CoFe layered double hydroxide based on metal-organic frameworks template to activate peroxymonosulfate for 2,4-dichlorophenol degradation

Metal-organic frameworks (MOFs) have unique properties and stable structures, which have been widely used as templates/precursors to prepare well developed pore structure and high specific surface area materials. In this article, an innovative and facile method of crystal reorganization was designed by using MOFs as sacrificial templates to prepare a layered double hydroxide (LDH) nano-layer sheet structure through a pseudomorphic conversion process under alkaline conditions. The obtained CoMn-LDH and CoFe-LDH catalysts broke the ligand of MOFs and reorganized the structure on the basis of retaining a high specific surface area and a large number of pores, which had higher specific surface area and well developed pore structure compared with LDH catalysts prepared by traditional methods, and thus provide more active sites to activate peroxymonosulfate (PMS). Due to the unique framework structure of MOFs, the MOF-derived CoMn-LDH and CoFe-LDH catalysts could provide more active sites to activate PMS, and achieve a 2,4-dichlorophenol degradation of 99.3% and 99.2% within 20 minutes, respectively. In addition the two LDH catalysts displayed excellent degradation performance for bisphenol A, ciprofloxacin and 2,4-dichlorophenoxyacetic acid (2,4-D). X-ray photoelectron spectroscopy indicated that the valence state transformation of metal elements participated in PMS activation. Electron paramagnetic resonance manifested that sulfate radical (SO₄^•-) and singlet oxygen (¹O₂) were the main species for degrading pollutants. In addition, after the three-cycle experiment, the CoMn-LDH and CoFe-LDH catalysts also showed long-term stability with a slight activity decrease in the third cycle. The phytotoxicity assessment determined by the germination of mung beans proved that PMS activation by MOF-derived LDH catalysts can basically eliminate the phytotoxicity of a 2,4-D solution. This research not only developed high-activity LDH catalysts for PMS activation, but also expanded the environmental applications of MOF derivants.

Hydrothermal synthesis of magnetic nano-CoFe2O4 catalyst and its enhanced degradation of amoxicillin by activated permonosulfate

Advanced oxidation process (AOP) has attracted widespread attention because it can effectively remove antibiotics in water, but its practical engineering application is limited by the problems of the low efficiency and difficult recovery of the catalyst. In the study, nano-spinel CoFe₂O₄ was prepared by hydrothermal method and served as the peroxymonosulfate (PMS) catalyst to degrade antibiotic amoxicillin (AMX). The reaction parameters such as CoFe₂O₄ dosage, AMX concentration, and initial pH value were also optimized. The reaction mechanism was proposed through free radical capture experiment and possible degradation pathway analysis. In addition, the magnetic recovery performance and stability of the catalyst were evaluated. Results showed that 85.5% of AMX could be removed within 90 min at optimal conditions. Sulfate radicals and hydroxyl radicals were the active species for AMX degradation. Moreover, the catalyst showed excellent magnetism and stability in the cycle experiment, which has great potential in the AOP treatment of antibiotic polluted wastewater.

Enhanced bezafibrate degradation and power generation via the simultaneous PMS activation in visible light photocatalytic fuel cell

A collaborative system including peroxymonosulfate (PMS) activation in a photocatalytic fuel cell (PFC) with an BiOI/TiO₂ nanotube arrays p-n type heterojunction as photoanode under visible light (PFC(BiOI/TNA)/PMS/vis system) was established. Xenon lamp was used as the light source of visible light. A 4.6 times higher pseudo-first-order bezafibrate (BZF) degradation rate constant was achieved in this system compared with the single PFC(BiOI/TNA)/vis system. The radical quenching experiments revealed that the contribution of reactive oxidative species (ROS) followed the order of ¹O₂ ≈ h⁺ >> •OH > SO₄^•- >>O₂^•-. The EPR tests demonstrated that PMS addition enlarged the formation of ¹O₂, •OH and SO₄^•-, but suppressed O₂^•- yield. Interestingly, ¹O₂ was further proved to dominantly originated from the priority reaction between positive photoinduced holes (h⁺) and negatively charged PMS. Besides, N₂-purging tests and density functional theory calculation indicated that PMS probably reacted with residual photoinduced electron (e^-) on the more negative conduction band (CB) of BiOI to form •OH and SO₄^•-, but competed with dissolved oxygen. Other e^- transferred to the less negative CB of TNA through p-n junction will efficiently move to cathode through the external circuit. The greatly promoted power generation of PFC system was observed after PMS addition due to extra h⁺ consumption and efficient e^- separation and transfer. Besides, three possible pathways for BZF degradation were proposed including hydroxylation, fibrate chain substituent and amino bond fracture. This study can provide new insights into the mechanisms of PMS assisted photocatalysis and accompanying energy recovery.

Sulfate radical formation by Cr(III) activation of peroxydisulfate - Diphenylcarbazide spectrophotometric determination of sulfate radical and its scavenging activity

Even though sulfate anion radical (SO₄^-) is a very reactive oxidant used in advanced oxidation processes, a reliably selective and simple colorimetric method for determining this radical can hardly be found. Peroxydisulfate (S₂O₈^2-) or peroxymonosulfate (HSO₅^-) can be activated with transition metal ions to produce SO₄^-. We have discovered that Cr(III) can be an activator for persulfate, generating Cr(VI) along with SO₄^-. By measuring the emerging chromate with diphenyl carbazide (DPC) spectrophotometry at 542 nm, we could measure both the formation of SO₄^- and its scavenging with antioxidant compounds. We could also investigate a number of UV-absorbing SO₄^- scavengers which could not be measured with other UV spectrometric methods. In addition to conventional antioxidants (phenolics such as quercetin, catechin, epicatechin, caffeic acid, thiols like cysteine and N-acetyl cysteine, and ascorbid acid), nitro-aromatics (represented by 2,4,6-trinitrophenol and 2,4-dinitrophenol) used in ammunition formulations could also be measured as scavengers. The presence of scavengers caused a reduction in the amount of Cr(VI) generated, where the difference in absorbance (ΔA) of chromate - with respect to the DPC method - in the absence and presence of scavengers was a linear function of SO₄^- scavenging capacity. Ethanol and tert-butanol were tested as solvents to show the selectivity of the method for SO₄^-. The method was statistically compared to a suitably modified ABTS/persulfate assay. The efficiency order of sulfate radical scavengers was determined and ranked (Spearman's test) using both the proposed method and modified ABTS/persulfate method to reveal a moderate correlation.

Singlet oxygen-dominated activation of peroxymonosulfate by passion fruit shell derived biochar for catalytic degradation of tetracycline through a non-radical oxidation pathway

Waste-derived biochar has been emerged as promising catalysts to activate peroxymonosulfate (PMS) for the degradation of organic contaminants. Herein, passion fruit shell derived biochar (PFSC) was prepared by a one-pot pyrolysis method and used as a metal-free catalyst to activate PMS for the degradation of tetracycline hydrochloride (TC). The batch experiments indicated that the pyrolysis temperature could influence the efficiency of PFSC for the activation of PMS. In the PFSC-900 (prepared at 900 °C)/PMS system, the degradation rate of TC can reach 90.91%. The quenching test and electron paramagnetic resonance spectra revealed that the high catalytic performance of PFSC-900/PMS system was mainly attributed to the non-free radical reaction pathway containing a carbon bridge, and the TC degradation was controlled primarily by singlet oxygen-mediated oxidation. Moreover, the carboxyl group of ketones and the graphite-N atoms on PFSC-900 are the possible active sites of the non-free radical pathway including direct electron transfer or the formation of O₂^•-/¹O₂. This study not only shows a new type of biochar as an efficient catalyst for PMS activation but also provides a way of value-added reuse of passion fruit shell.

Morphological influence of BiVO4 nanostructures on peroxymonosulfate activation for highly efficient catalytic degradation of rhodamine B

Bismuth vanadate (BiVO₄) nanostructured films were prepared and successfully applied for peroxymonosulfate (PMS) activation for the degradation of rhodamine B (RhB) in aqueous solution. The BiVO₄ thin films were obtained by thermal reaction between electrodeposited bismuth (Bi) films and vanadium precursor. The as-prepared BiVO₄ porous, nanoflowers, and cluster nanostructures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy, and BET analysis. The catalytic performance of BiVO₄ nanostructures has been carefully evaluated in activating PMS for the degradation of RhB. The nanoflower-like BiVO₄ nanostructures exhibit the best catalytic activity. Under optimized conditions, the complete catalytic degradation of RhB using BiVO₄ nanoflowers/PMS system was achieved in 17 min at room temperature as revealed by high-performance liquid chromatography (HPLC) analysis. Quenching experiments suggested that sulfate radicals are the main active species in the degradation process. Additionally, BiVO₄ catalyst remained stable without any apparent activity loss after five cycling runs.

The influence of UV irradiation on PAHs in wastewater

Studies were carried out on the impact of UV radiation contact time and UV/chlorination processes on changes in polycyclic aromatic hydrocarbons (PAHs) content in treated wastewater in order to obtain environmentally safe water. The research showed that the optimal time of UV irradiation for both processes was 30 min. After irradiation, the total concentration of PAH decreased by 66%, and after the UV/chlorination process by 78%. Following UV irradiation, the reduction ranged from 74% to 81% for 3-ring PAHs, 4-ring benzo(a)anthracene and 5-ring dibenzo(a,h)anthracene. Using the UV/chlorination process, the greatest changes were observed for acenaphthene (93 ± 4%), anthracene (90 ± 4%), pyrene (87% ± 3) and acenaphthylene (83 ± 4%). Due to limited information on the mechanisms which can be responsible for the observed decrease in PAH content in wastewater after the UV and UV/chlorination processes, it cannot be clearly stated to what extent the methods used affect the actual reduction of the concentration, therefore further research is required.

Efficiency and Quantitative Structure-Activity Relationship of Monoaromatics Oxidation by Quinone-Activated Persulfate

Quinones and quinone-containing organics have potential of activating persulfate to produce sulfate radical. In this work, the optimal condition for quinone activation of persulfate was investigated. It was found representative monoaromatics were degraded fastest in alkaline environment (pH 10.0), but excessive alkalinity restrained the reaction instead. The mechanisms to explain this phenomenon were speculated. The effect of initial quinone concentration on persulfate oxidation was also investigated at pH 10.0. In addition, a quantitative structure-activity relationship model was established with 15 kinds of monoaromatics, which revealed the most negative atomic net charges on carbon atom played an important role on degradation rates. Chemicals with a smallerq C - were easier oxidized in quinone-activate system. This finding helps further exploration of effective activator in alkaline environment.

Preparation of Mn2O3/MIL-100(Fe) composite and its mechanism for enhancing the photocatalytic removal of rhodamine B in water

In this study, Mn₂O₃/MIL-100(Fe) composite was successfully synthesized by the hydrothermal method and applied for photocatalytic removal of rhodamine B (RhB) in water. The physical and chemical properties of the synthesized materials were characterized by XRD, FTIR, SEM, UV-visible, and BET analyses. Experimental results showed a great enhancement in the photocatalytic ability of the Mn₂O₃/MIL-100(Fe) composite as compared to individual Mn₂O₃ or MIL-100(Fe) under visible light and persulfate activation. The affecting factors such as pH, photocatalyst dose, RhB concentration, and Na₂S₂O₈ concentration were investigated to find out the best conditions for efficient photocatalysis. By conducting a radical quenching test, all radicals of HO˙, SO₄˙^-, ¹O₂, and O₂˙^- were found to be important in photocatalytic decomposition. The mechanism was proposed for the enhancement of photocatalytic RhB removal via band potential calculation, charge separation, surface redox reaction, and key reactive oxidation species. With its durability, reusability, and high efficiency, the Mn₂O₃/MIL-100(Fe) composite emerges as a potential photocatalyst working under visible light for application in wastewater treatment.

Porous ZrO2 encapsulated perovskite composite oxide for organic pollutants removal: Enhanced catalytic efficiency and suppressed metal leaching

Cobalt-based perovskite material, an effective activator of PMS, is widely employed for wastewater remediation, but still affected by the leakage of the cobalt ions. In this study, a porous core-shell structured perovskite LaFe_0.1Co_0.9O_3-λ/SiO₂ core @ZrO₂ shell (LFCS@ZrO₂) was fabricated and partially etched to enlarge channels to further enhance mass transfer ability. The well-designed core-shell structure can not only restrain metal ion leaching by changing the surface microenvironment but also provide an additional driving force attributed to the enriched concentration gradient, thus enhancing the catalytic oxidation performance. Results showed that the partially etched LFCS@ZrO₂ (eLFCS@ZrO₂) particles exhibited an increased pore size and showed an attractive catalytic performance as well as a suppressed cobalt ion leaching (3.61 to 0.67 mg/L). Over 99% of tetracycline hydrochloride (20 mg/L) could be degraded in 15 min, and the reaction rate increased 2 folds compared with pristine LaFe_0.1Co_0.9O_3-λ. Besides, quenching test and electron paramagnetic resonance analysis proved that sulfate radicals and singlet oxygen were the two predominant reactive oxygen species during the catalytic oxidation. This work provides a novel perspective for the fabrication of an environmentally friendly perovskite catalyst, which has a great potential application in organic pollutant degradation.

A review on efficient removal of phthalic acid esters via biochars and transition metals-activated persulfate systems

As emerging contaminants, PAEs (Phthalic Acid Esters or Phthalate Esters) have been extensively utilized in industrial production to soften the rigid plastics (plasticizers), and their related products are widely distributed in our daily life. The PAEs can readily transfer from the products to the surrounding environment due to not being chemically bound to the products. In this study, we analyzed the PAEs' properties, usage, and consumption in the world, as well as toxicity to human beings. As endocrine-disrupting chemicals (EDCs), PAEs can disturb the normal hormones reactions, resulting in developmental and reproductive problems. Thus, we have to concern the removal strategies of PAEs. We summarized two novel approaches, including biochars and persulfate (PS) oxidation for effectively removing PAEs in the literature. Their characteristics, removal mechanisms, and the main impact factors on the removal of PAEs were highlighted. Moreover, transition metal-activated PS showed good performance on PAEs degradation. Furthermore, the synergy of biochars and transition metals-PS can overcome the disadvantages of a single approach, and show better performance on the removal of PAEs. Finally, we put forward vital strategies to update two approaches (including the combined) for enhancing the removal of PAEs. It is expected that the researchers or scientists can get a hint on effectively remediating PAEs-contaminated sites via the biochars' sorption/transition metals-PS or the combined two from this review paper.

Advanced activation of persulfate by polymeric g-C3N4 based photocatalysts for environmental remediation: A review

Photocatalytic materials for photocatalysis is recently proposed as a promising strategy to address environmental remediation. Metal-free graphitic carbon nitride (g-C₃N₄), is an emerging photocatalyst in sulfate radical based advanced oxidation processes. The solar-driven electronic excitations in g-C₃N₄ are capable of peroxo (O‒O) bond dissociation in peroxymonosulfate/peroxydisulfate (PMS/PDS) and oxidants to generate reactive free radicals, namely SO₄^•- and OH^• in addition to O₂^•- radical. The synergistic mechanism of g-C₃N₄ mediated PMS/PDS photocatalytic activation, could ensure the generation of OH^• radicals to overcome the low reductive potential of g-C₃N₄ and fastens the degradation reaction rate. This article reviews recent work on heterojunction formation (type-II heterojunction and direct Z-scheme) to achieve the bandgap for extended visible light absorption and improved charge carrier separation for efficient photocatalytic efficiency. Focus is placed on the fundamental mechanistic routes followed for PMS/PDS photocatalytic activation over g-C₃N₄-based photocatalysts. A particular emphasis is given to the factors influencing the PMS/PDS photocatalytic activation mechanism and the contribution of SO₄^•- and OH^• radicals that are not thoroughly investigated and require further studies. Concluding perspectives on the challenges and opportunities to design highly efficient persulfate-activated g-C₃N₄ based photocatalysts toward environmental remediation are also intensively highlighted.

Preparation of metal organic framework derived materials CoFe2O4@NC and its application for degradation of norfloxacin from aqueous solutions by activated peroxymonosulfate

The metal organic framework derived materials (CoFe₂O₄@NC) activated peroxymonosulfate (PMS) to degrade Norfloxacin (NOR) owing to the characteristics of high surface area (109.658 m² g^-1) and abundant mesoporous structure. The characterization results demonstrated that the optimal ratio of bimetal and of bimetallic to organic ligands (M/O) had good crystal structure and stability (Fe/Co = 3:1, M/O = 2:1). Moreover, NOR (10 mg L^-1) removal of 98.78% was achievable in 60 min with an optimum concentration of PMS (0.32 mM) and dosage of CoFe₂O₄@NC (0.1 g L^-1). The radical quenching results suggested that SO₄·^-, ·OH and ¹O₂ functioned in the presence of the system certificated by XPS spectra. The presence of Cl^- and CO₃^2-/HCO₃^- promoted the catalyst reaction. The recoverability revealed high removal efficiency of NOR of 93.55% could still be maintained. Furthermore, four pathways of NOR degradation were proposed, including dehydroxylation, defluorination, quinolone group conversion and piperazine ring transformation, which were attributed to the synergy of reactive oxygen species. The above results highlight that the method is of great significance to the practical application of heterogeneous catalysts in aqueous solutions.

Integration of heterogeneous photocatalysis and persulfate based oxidation using TiO2-reduced graphene oxide for water decontamination and disinfection

Advanced oxidation processes (AOPs) which involve the generation of highly reactive free radicals have been considered as a promising technology for the decontamination of water from chemical and bacterial pollutants. In this study, integration of two major AOPs viz., heterogeneous photocatalysis involving TiO2-reduced graphene oxide (T-RGO) nanocomposite and activated persulfate (PS) based oxidation was attempted to remove diclofenac (DCF), a frequently detected pharmaceutical contaminant in water. The enhanced visible light responsiveness of T-RGO would facilitate the use of direct sunlight as a benign and cost effective source of energy for the photocatalytic activation. By combining PS based oxidation process with T-RGO mediated photocatalysis, a DCF removal efficiency of more than 98% was achieved within 30 min. The effect of operating parameters like PS concentration and pH on DCF removal was assessed. Radical scavenging experiments indicated that apart from radical oxidation involving •OH andSO 4 · - radicals, a non-radical oxidation pathway was also taking place in the degradation. The antibacterial properties of the integrated system were also evaluated using Escherichia coli and Staphylococcus aureus as representative bacteria. The presence of PS in the photocatalytic reaction system improved the antibacterial activity of the composite against the two strains studied. Cytotoxicity of T-RGO nanocomposite was assessed using human macrophage cell lines and the results showed that the composite is biocompatible and nontoxic at the recommended dosage for water treatment in the present study.

Effective degradation of 2,4-dihydroxybenzophenone by zero-valent iron powder (Fe0)-activated persulfate in aqueous solution: Kinetic study, product identification and theoretical calculations

2,4-Dihydroxybenzophenone (BP-1), a typically known derivative of the benzophenone-type UV filter, has been frequently detected in aqueous environments and poses a potential risk to human health and the entire ecosystem. In this study, an effective advanced oxidation technique using zero-valent iron powder (Fe⁰)-activated persulfate (PS) was used for the degradation of BP-1. The effects of several experimental parameters, including Fe⁰ dosages, PS dosages, pH, and common natural water constituents, were systematically investigated. The BP-1 degradation efficiency was enhanced by increasing the Fe⁰ and PS dosages and decreasing the solution pH. The presence of different concentrations of humic acid (HA) could inhibit BP-1 removal, while the addition of various cations and anions had different effects on the degradation. Moreover, the degradation of BP-1 in five water matrices was also compared, and the removal rates followed the order of ultrapure water > tap water > secondary clarifier effluent > river water > synthetic water. Thirteen oxidation products were identified by liquid chromatography-time-of-flight-mass spectrometry (LC-TOF-MS) analysis, and five possible degradation pathways were proposed. The addition reactions initiated by HO and SO₄^-, as well as single-electron coupling reactions and ring-closing reactions, were further supported by density functional theory (DFT) calculations. Assessment of toxicity of intermediates of the oxidation of BP-1 suggested decreased toxicity from the parent contaminant. The present work illustrates that BP-1 could be efficiently degraded in the Fe⁰/PS system, which may provide new insights into the removal of benzophenones in water and wastewater.

Efficient activation of peroxymonosulfate by Co-doped mesoporous CeO2 nanorods as a heterogeneous catalyst for phenol oxidation

Sulfate radical-based advanced oxidation processes have received considerable attentions in the remediation of organic pollutants due to their high oxidation ability. In this study, a novel Co3O4/CeO2 catalyst was fabricated and employed as a peroxymonosulfate (PMS) activator to generate SO4•- for phenol degradation. The Co3O4/CeO2 catalyst exhibited a good catalytic performance at a wide pH range of 3.4 to 10.8, and 100% phenol (20 mg/L) was removed within 50-min reaction under optimal conditions with 0.2 g/L catalyst and 2.0 g/L PMS at room temperature. The transformation products and total organic carbon during the degradation process were also determined. The quenching experiments and electron paramagnetic resonance spectra revealed that sulfate radical (SO4•-) rather than other species such as singlet oxygen (1O2) and hydroxyl radical (•OH) was primarily responsible for phenol degradation in the Co3O4/CeO2/PMS system, and a rational mechanism was proposed. Moreover, the recycling experiments as well as low cobalt leaching concentration manifested satisfactory reusability and stability. The effects of various inorganic anions and natural organic matter in real water matrix on phenol oxidation were further evaluated. We believe that the Co3O4/CeO2 composites have promising applications of PMS activation for the degradation of organic pollutants in wastewater treatment.

Sunlight-driven activation of peroxymonosulfate by microwave synthesized ternary MoO3/Bi2O3/g-C3N4 heterostructures for boosting tetracycline hydrochloride degradation

Design of direct Z-scheme heterojunction photocatalyst is considered as an effective strategy to fully use the high redox potential photogenerated charge carriers. This work reports a novel method for investigating the photosynergistic performance of the Z-scheme MoO₃/Bi₂O₃/g-C₃N₄ (MBG) photocatalyst with peroxymonosulfate (PMS) for the solar degradation of tetracycline hydrochloride (TCH), a model of organic pollutants in wastewater. The results showed a better strategy to activate PMS via accelerating the redox cycle (Mo⁶⁺/Mo⁵⁺), which ultimately induces the successive generation of highly reactive oxygen species. The effect of dosage of the catalyst, PMS, pH of the solution, initial concentrations of TCH and the presence of inorganic anions were investigated. It was found that the degradation of the TCH under sunlight irradiation (SL) was strongly enhanced by the presence of the PMS as an electron acceptor. The MBG/PMS/SL system was able to degrade an initial concentration (40 mg/L) of the TCH solution within 140 min. The good reusability and stability of the MBG catalyst were evaluated by recycling the degradation experiment. The main free radicals are OH and SO₄^─ which played an important role in the degradation reaction were identified by scavenger experiments and confirmed by EPR spectroscopy. X-ray photoelectron spectroscopy (XPS) study revealed the role of molybdenum ion in the activation process of PMS. The possible synergistic degradation reaction mechanism was proposed.

Remediation of trichloroethylene contaminated soil by unactivated peroxymonosulfate: Implication on selected soil characteristics

The advanced oxidation process (AOP) based on activated Peroxymonosulfate (PMS) has been attracting many people in the field of soil and water remediation in many ways while ignoring the shortcomings. The high cost of activators, and energy input, as well as the expense to separate the catalyst and transition metal reducing agent from the treated soil, were some disadvantages of using activated PMS. Based on the above rationales of problems related to the use of activated PMS, this study aimed to study the performance of using unactivated peroxymonosulfate for the advanced oxidation process to remediate soil contaminated by trichloroethylene (TCE), and to evaluate the synergistic effect on selected soil properties after treatment. The results showed that within 45 min, a single injection of 5 mM PMS at its initial pH value can degrade 86.90% of the total TCE in the soil. However, when PMS was continuously injected, the removal rate was increased to 95.25%. The direct reaction of TCE and PMS was the main cause of degradation. PMS can degrade TCE in a wide pH range (pH 3-11), but the maximum degradation was at pH = 2.9 (the initial pH of PMS). After the treatment, the soil organic matter (SOM) was degraded significantly. In contrast, FTIR, SEM, and hydrometer tests conducted on the soil showed that the treatment had no significant effect on the functional groups and particle size distribution of the treated soil. The study on the effect of the treatment on the concentration of bioavailable heavy metals in the treated soil showed that only manganese and copper metals were significantly increased after the treatment. According to the results obtained in this study, it is more beneficial and feasible to use unactivated peroxymonosulfate in the advanced oxidation process when remediating soil contaminated by chlorinated organic matter.

Persulfate-activated charcoal mixture: an efficient oxidant for the synthesis of sulfonated benzo[d][1,3]oxazines from N-(2-vinylphenyl)amides and thiols in aqueous solution

A series of 2,4-aryl-4-((arylsulfonyl)methyl)-4H-benzo[d][1,3]oxazines in good to excellent yields have directly been obtained from N-(2-vinylphenyl)amides and thiols by employing a mixture of K₂S₂O₈-activated charcoal in aqueous acetonitrile solution at 50 °C. A plausible mechanism for the reaction is reported. It reveals that the reaction follows a radical pathway and the persulfate has been the oxygen source for formation of the sulfone group in the products. It is worth mentioning that this protocol utilizes an easily accessible K₂S₂O₈-activated charcoal mixture and thiols, respectively, as an oxidant and sulfonylating precursors for the first time.

Nonradicals induced degradation of organic pollutants by peroxydisulfate (PDS) and peroxymonosulfate (PMS): Recent advances and perspective

Nonradical persulfate oxidation processes have emerged as a new wastewater treatment method due to production of mild nonradical oxidants, selective oxidation of organic pollutants, and higher tolerance to water matrixes compared with radical persulfate oxidation processes. Since the case of the nonradical activation of peroxydisulfate (PDS) was reported on CuO surface in 2014, nonradical persulfate oxidation processes have been extensively investigated, and much achievement has been made on realization of nonradical persulfate activation processes and understanding of intrinsic reaction mechanism. Therefore, in the review, nonradical pathways and reaction mechanisms for oxidation of various organic pollutants by PDS and peroxymonosulfate (PMS) are overviewed. Five nonradical persulfate oxidation pathways for degradation of organic pollutants are summarized, which include surface activated persulfate, catalysts-free or catalysts mediated electron transfer, ¹O₂, high-valent metals, and newly derived inorganic oxidants (e.g., HOCl and HCO₄^-). Among them, the direct oxidation processes by persulfate, nonradical based persulfate activation by inorganic/organic molecules and in electrochemical methods is first overviewed. Moreover, nonradical based persulfate activation mechanisms by metal oxides and carbon materials are further updated. Furthermore, investigation methods of interaction between persulfate and catalyst surface, and nature of reactive species are also discussed in detail. Finally, the future research needs are proposed based on limited understanding on reaction mechanism of nonradical based persulfate activation. The review can offer a comprehensive assessment on nonradical oxidation of organic pollutants by persulfate to fill the knowledge gap and provide better guidance for future research and engineering application of persulfate.

Tin dioxide decorated on Ni-encapsulated nitrogen-doped carbon nanotubes for anodic electrolysis and persulfate activation to degrade cephalexin: Mineralization and degradation pathway

In this study, bamboo-shaped carbon nanotubes exhibiting high nitrogen content and Ni encapsulation (Ni@NCNT) were effectively synthesized by a simple pyrolysis method. The catalytic peroxydisulfate activation for cephalexin (CPX) degradation was investigated using the prepared material. SnO₂ was further decorated and fabricated on the anode material (SnO₂/Ni@NCNT) for electrochemical degradation of CPX in an aqueous solution. Transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy indicated that the SnO₂ nanoparticles were uniformly distributed on the surface of Ni@NCNT. Electrochemical characterization employing cyclic voltammetry and linear sweep voltammetry demonstrated that SnO₂/Ni@NCNT displayed higher oxygen evolution potential and electrocatalytic activity than Ni@NCNT. Mineralization of CPX in wastewater was performed using electrolysis coupled with persulfate oxidation. The analysis revealed a synergistic strengthening effect. The electropersulfate oxidation resulted in higher total organic carbon (TOC) removal (70.3%) than the sum of electrooxidation (48.1%) and persulfate oxidation (9.2%) toward CPX. This phenomenon might result from the regeneration of sulfate radicals (SO₄^•-) on the anode and complementary oxidation by SO₄^•- and OH. Persulfate oxidation alone was shown to result in low TOC removal, although CPX was mostly degraded. Additionally, the CPX degradation pathway involving electropersulfate oxidation was proposed and it is indicated that CPX molecules were completed decomposed by the examination of short chain acids, mineralized ions, and ecotoxicity evolution indicated that the antibiotic was completely degraded. This study provides a new approach for the design and preparation of novel electrode materials and electrochemical degradation facilities for the removal of pollutants via persulfate activation.

Evolution of Singlet Oxygen by Activating Peroxydisulfate and Peroxymonosulfate: A Review

Advanced oxidation processes (AOPs) based on peroxydisulfate (PDS) or peroxymonosulfate (PMS) activation have attracted much research attention in the last decade for the degradation of recalcitrant organic contaminants. Sulfate (SO₄^•−) and hydroxyl (^•OH) radicals are most frequently generated from catalytic PDS/PMS decomposition by thermal, base, irradiation, transition metals and carbon materials. In addition, increasingly more recent studies have reported the involvement of singlet oxygen (¹O₂) during PDS/PMS-based AOPs. Typically, ¹O₂ can be produced either along with SO₄^•− and ^•OH or discovered as the dominant reactive oxygen species (ROSs) for pollutants degradation. This paper reviews recent advances in ¹O₂ generation during PDS/PMS activation. First, it introduces the basic chemistry of ¹O₂, its oxidation properties and detection methodologies. Furthermore, it elaborates different activation strategies/techniques, including homogeneous and heterogeneous systems, and discusses the possible reaction mechanisms to give an overview of the principle of ¹O₂ production by activating PDS/PMS. Moreover, although ¹O₂ has shown promising features such as high degradation selectivity and anti-interference capability, its production pathways and mechanisms remain controversial in the present literatures. Therefore, this study identifies the research gaps and proposes future perspectives in the aspects of novel catalysts and related mechanisms.

Synergistically enhanced heterogeneous activation of persulfate for aqueous carbamazepine degradation using Fe3O4@SBA-15

The exploration of low-cost, high-performance and stable catalytic materials for sulfate radical-based advanced oxidation processes (SR-AOPs) is of great importance. This study presents Fe₃O₄-wrapped SBA-15 mesoporous silica catalyst (Fe₃O₄@SBA-15) for persulfate (PS) activation. The Fe₃O₄@SBA-15 with an Fe₃O₄ to SBA-15 weight ratio of 3:1 exhibited an impressive carbamazepine (CBZ) removal efficiency of ~100% after 30 min of SR-AOP at an initial pH of 3.0, a temperature of 25 °C, an initial PS concentration of 300 mg L^-1 and a catalyst concentration of 0.50 g L^-1. The primary oxidizing species produced in the system were identified as SO₄^- and HO by electron paramagnetic resonance spectra and radical quenching experiments. Benefiting from the synergetic effects of improved Fe₃O₄ dispersion and enhanced adsorption of CBZ and PS by SBA-15, the as-obtained heterogeneous Fe₃O₄@SBA-15 catalysts offer large numbers of active sites for free radical generation and high surface concentrations of CBZ and PS for SR-AOPs, as verified by physicochemical characterization and Langmuir-Hinshelwood model analysis. In addition, the activity of Fe₃O₄@SBA-15 was maintained throughout six successive cycling tests. Various inorganic anions, including Cl^-, NO₃^-, HCO₃^-, and CO₃^2-, as well as organic material in natural water, exert a negative impact on the Fe₃O₄@SBA-15 catalyzed SR-AOPs and deserve special attention.

HPO42- enhanced catalytic activity of N, S, B, and O-codoped carbon nanosphere-armored Co9S8 nanoparticles for organic pollutants degradation via peroxymonosulfate activation: critical roles of superoxide radical, singlet oxygen and electron transfer

In this study, we report a facile synthesis of a novel N, S, B, and O-codoped carbon nanosphere-armored Co9S8 nanoparticle composite (Co9S8@NSBOC) and its superior activation performance toward peroxymonosulfate (PMS) for methylene blue (MB) and ofloxacin degradation. The effects of various experimental parameters and the general applicability of the catalyst were investigated. Particularly, Co9S8@NSBOC exhibited high catalytic activity in a wide pH range of 3-12 and HPO42- exhibited a synergic catalytic effect with Co9S8@NSBOC in the degradation system. Radical quenching tests, EPR measurements and electrochemical analysis demonstrated that the degradation mechanism of pollutants in the Co9S8@NSBOC/PMS system included both radical and non-radical pathways, in which ˙O2-, 1O2 and electron transfer played dominant roles. Co2+, S2-, carbon defects, C[double bond, length as m-dash]O/C-O-C, pyridinic-N, graphitic-N, BC2O and C-S-C species on Co9S8@NSBOC, all contributed to PMS activation. The degradation pathways of MB and ofloxacin were proposed based on HPLC-MS/MS analysis of their degradation intermediates. This work not only presents a facile and practical synthetic method of cobalt sulfide-coupled multi-heteroatom-doped carbocatalysts, but also provides useful insights into their active sites and activation mechanisms toward PMS activation.

Iron powder activated peroxymonosulfate combined with waste straw to improve sludge dewaterability

In an activated sludge system, the high hydrophilicity of extracellular polymeric substances (EPS) and the high compressibility of sludge greatly hinder sludge dewatering. A new method for improving the dehydration of waste activated sludge was explored by using iron powder activated peroxomonosulfate combined with waste straw (Fe⁰+PMS + WS). Specific resistance to filtration (SRF) and water content (Wc) were used to characterize the dewatering performance of sludge. Under the optimal measurement, Wc and SRF were significantly reduced. To reveal the synergistic effect of this joint treatment, zeta potential, particle size distribution, three-dimension excitation emission matrix (3D-EEM) fluorescence spectroscopy, bound water content analysis, and scanning electron microscopy (SEM) were used to investigate the mechanism of sludge dewatering. Results showed that the tightly bound EPS (TB-EPS) was oxidized by sulfate radicals (SO4-∙) to loose bound EPS (LB-EPS) and soluble EPS(S-EPS). SEM analysis displayed that the Fe⁰+PMS + WS combination regulated the formation of a more porous sludge filter cake structure. In addition, the low calorific value of the dewatered sludge after 12 h in open air was significantly increased, and the Wc of the dewatered sludge cake was reduced to 25%. These parameters were beneficial to the subsequent disposal of sludge.

Physicochemical characteristics of calcined MnFe2O4 solid nanospheres and their catalytic activity to oxidize para-nitrophenol with peroxymonosulfate and n-C7 asphaltenes with air

Manganese ferrite solid nanospheres (MSNs) were prepared by a solvothermal method and calcined at various temperatures up to 500 °C. Their surface area, morphology, particle size, weight change during calcination, surface coordination number of metal ions, oxidation state, crystal structure, crystallite size, and magnetic properties were studied. The MSNs were used as catalysts to activate potassium peroxymonosulfate (PMS) for the oxidative degradation of para-nitrophenol (PNP) from water and for the oxidation of n-C₇ asphaltenes in flowing air at atmospheric (0.084 MPa) and high pressure (6 MPa). Mn was in oxidation states (II) and (III) at calcination temperature of 200 °C, and the crystalline structure corresponded to jacobsite. Mn was in oxidation states (III) and (IV) at 350 °C and in oxidation states (II), (III), and (IV) at 500 °C, and the crystalline structure was maghemite at both temperatures. MSN catalysts generated hydroxyl (HO·) and sulfate (SO₄^·-) radicals in the PMS activation and generated HO· radicals in the n-C₇ asphaltene oxidation. In both reactions, the best catalyst was MSN calcined at 350 °C (MSN350), because it has the highest concentration of Mn(III) in octahedral B sites, which are directly exposed to the catalyst surface, and the largest total and lattice oxygen contents, favoring oxygen mobility for Mn redox cycles. The MSN350 sample reduces the decomposition temperature of n-C₇ asphaltenes from 430 to 210 °C at 0.084 MPa and from 370 to 200 °C at 6.0 MPa. In addition, it reduces the effective activation energy by approximately 77.6% in the second combustion (SC) region, where high-temperature oxidation reactions take place.

Determination and Environmental Implications of Aqueous-Phase Rate Constants in Radical Reactions

Interests in the kinetics of radical-induced reactions in aqueous solution have grown remarkably due to their water engineering significance (e.g., advanced oxidation processes). Although compilations of the rate constants (k) for various radicals have been documented, surprisingly a systematic review has yet to be reported on the development of reliable methods for determining k values. A knowledge gap exists to critically evaluate and screen the various methods to measure them. In this review, we summarize the direct and indirect methods under steady-state and non-steady-state conditions, followed by critical evaluations on their advantages and disadvantages. The radicals of ·OH, [Formula: see text] , [Formula: see text] , and Cl· were chosen based on their significant aquatic environmental relevance. MS excel spreadsheets that demonstrate the determination processes were provided allowing one to reproduce the data and/or to analyze the unprocessed raw data as a "template". We formulated a standard operation procedure for the k determination, although there is simply no "versatile" method fitting for all radical reactions. Finally, existing challenges and future research focus are discussed. This is the first review covering methodological approaches and considerations, aiming to provide a holistic and fundamental basis to choose an appropriate method for determining the k values for bimolecular reactions between target compounds and radicals in the aqueous phase.