Adsorption and photocatalyst assisted dye removal and bactericidal performance of ZnO/chitosan coating layer

Synthesis, spectral and antimicrobial studies of amino acid derivative Schiff base metal (Co, Mn, Cu, and Cd) complexes

Amino acid derivative Schiff base was synthesized by reaction of leucine with salicyldehyde in basic medium. The Schiff base was used as a ligand which was reacted with Co, Mn, Cu and Cd metals in order to form the stable complexes. The synthesized ligand and metals complexes were characterized by using different spectroscopic tools i.e. FT-IR, Mass spectrometry and NMR. The percentages of different elements present in ligand molecule and complexes was confirmed by Elemental analyzer. All compounds including ligand and complexes were also engaged with different bacterial (Escheria coli, Staphylococcus aureus, Bacillus subbtilis) and fungal strains (Alternaria alternate, Aspergillus flavus and Aspergillus niger) in order to check the inhibitory action of titled compounds. The results showed that the metal complexes have greater antimicrobial activities than ligand.

Chitosan-titanium oxide fibers supported zero-valent nanoparticles: Highly efficient and easily retrievable catalyst for the removal of organic pollutants

Different chitosan-titanium oxide (CS-TiO₂-x, with x = TiO₂ loadings of 1, 5, 10,15 and 20 wt%) nanocomposite fibers were prepared and kept separately in each salt solution of CuSO₄, CoNO₃, AgNO₃ and NiSO₄ to adsorb Cu²⁺, Co²⁺, Ag⁺, and Ni⁺ ions, respectively. The metal ions loaded onto CS-TiO₂ fibers were reduced to their respective zero-valent metal nanoparticles (ZV-MNPs) like Cu⁰, Co⁰, Ag⁰ and Ni⁰ by treating with NaBH₄. The CS-TiO₂ fibers templated with various ZV-MNPs were characterized and investigated for their catalytic efficiency. Among all prepared ZV-MNPs, Cu⁰ nanoparticles templated on CS-TiO₂-15 fibers exhibited high catalytic efficiency for the reduction of dyes (methyl orange (MO), congo red (CR), methylene blue (MB) and acridine orange (AO)) and nitrophenols (4-nitrohphenol (4-NP), 2-nitrophenol (2-NP), 3-nitrophenol (3-NP) and 2,6-dinitrophenol (2,6-DNP)). Besides the good catalytic activities of Cu/CS-TiO₂-15 fibers, it could be easily recovered by simply pulling the fiber from the reaction medium.

The preparation and antibacterial activity of cellulose/ZnO composite: a review

The infectious diseases caused by various bacteria pose serious threat to human health. To solve this problem, antibacterial agents have been widely used in people’s daily life to deactivate or kill these bacteria. Among the antibacterial agents, ZnO is one of the most promising metal oxide antibacterial agents due to its non-toxic nature and safe properties. To expand its application, many composites of ZnO have been widely studied. Cellulose, as one of the most abundant biopolymers, has many merits like biodegradability, biocompatibility and low cost. Thus, many studies focus on synthesized cellulose/ZnO. The synthetic strategy includes both chemical and physical methods. Many of them have been shown that cellulose/ZnO composites have excellent antibacterial activity and are environment-friendly and have many applications for example food packing, antibacterial fibers and so on. This review mainly discusses the preparation methods of cellulose/ZnO and their effect on the morphology and properties.

Facile method to immobilize ZnO particles on glass spheres for the photocatalytic treatment of tannery wastewater

In order to apply the photocatalytic processes on a real scale for the treatment of industrial wastewaters, the use of slurry reactors employing suspended photocatalysts is not suitable due to the need for an uncomfortable and expensive separation phase of photocatalyst. To overcome this disadvantage, the photocatalyst particles must be immobilized on a transparent support: our work proposes, for this reason, a simple and cost effective method for the deposition of ZnO photocatalyst on glass spheres in order to formulate a structured photocatalyst effective in the treatment of aqueous solutions containing various organic dyes, commonly used in the tannery industries and in the treatment of a real wastewater at high COD content (11 g/L) coming from the refining unit of the tanning process. In particular, ZnO was immobilized on glass spheres (ZnO/GS) with a simple dip coating method, starting from zinc acetate aqueous solution, without using complexing agent and strong basic compounds. The optimization of ZnO amount on glass spheres was evaluated employing Acid Blue 7 dye, as model pollutant. In particular, it was found that best performances in terms of discoloration and mineralization of the target dye were obtained using the photocatalyst with a ZnO loading equal to 0.19 wt% (ZnO_ac1), prepared through only one dip-coating step. Moreover, the ZnO_ac1 photocatalyst can be easily separated from the reaction mixture, maintaining excellent photocatalytic activity and durability even after several reuse cycles. Finally, ZnO_ac1 showed a high photocatalytic activity in the treatment of the real wastewater, obtaining a COD removal equal to 70% after 180 min of UV light irradiation.

Isotherms and kinetic study of ultrasound-assisted adsorption of malachite green and Pb2+ ions from aqueous samples by copper sulfide nanorods loaded on activated carbon: Experimental design optimization

Copper sulfide nanorods loaded on activated carbon (CuS-NRs-AC) was synthesized and used for simultaneous ultrasound-assisted adsorption of malachite green (MG) and Pb²⁺ ions from aqueous solution. Following characterization of CuS-NRs-AC were investigated by SEM, EDX, TEM and XRD, the effects of pH (2.0-10), amount of adsorbent (0.003-0.011g), MG concentration (5-25mgL^-1), Pb²⁺ concentration (3-15mgL^-1) and sonication time (1.5-7.5min) and their interactions on responses were investigated by central composite design (CCD) and response surface methodology. According to desirability function on the Design Expert optimum removal (99.4%±1.0 for MG and 68.3±1.8 for Pb²⁺ions) was obtained at pH 6.0, 0.009g CuS-NRs-AC, 6.0min mixing by sonication and 15 and 6mgL^-1 for MG and Pb²⁺ ions, respectively. High determination coefficient (R²>0.995), Pred-R²-value (>0.920) and Adju-R²-value (>0.985) all are good indication of best agreement between the experimental and design modelling. The adsorption kinetics follows the pseudo-second order model and adsorption isotherm follows the Langmuir model with maximum adsorption capacity of 145.98 and 47.892mgg^-1 for MG and Pb²⁺ ions, respectively. This adsorbent over short contact time is good choice for simultaneous removal of large content of both MG and Pb²⁺ ions from wastewater sample.

Bactericidal and catalytic performance of green nanocomposite based-on chitosan/carbon black fiber supported monometallic and bimetallic nanoparticles

Nanoparticles were synthesized on the surface of green nanocomposite based on carbon black dispersed in chitosan (CB-CS) fibres. The nanoparticles were monometallic Co, Ag and Cu and bimetallic Co + Cu and Co + Ag. The CB-CS fibres were prepared and introduced into separate metal salt solutions containing Co²⁺, Ag⁺ and Cu²⁺ and mixed Co²⁺+Cu²⁺ and Co²⁺+Ag⁺ ions. The metal ions immobilized on the surface of CB-CS were reduced using sodium borohydride (NaBH₄) as reducing agent to synthesize the corresponding zero-valent metal nanoparticles-loaded CB-CS fibres. All the nanoparticles-loaded CB-CS samples were characterized using field emission-scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction techniques. When tested as catalysts, the nanoparticles-loaded CB-CS showed excellent catalytic ability for the reduction of toxic and environmentally unwanted pollutants of para-nitrophenol, congo red and methyl orange dyes. Afterwards, the antimicrobial activities of virgin and metal-loaded CB-CS fibres were tested and the metal-loaded CB-CS fibres were found to be effective against Escherichia coli. In addition, the catalyst can be recovered easily by simply removing the fibres from the reaction mixture and can be recycled several times while maintaining high catalytic efficiency.

Strategies for cost-effective and enhanced production of bacterial cellulose

Bacterial cellulose (BC) has received substantial attention because of its high purity, mechanical strength, crystallinity, liquid-absorbing capabilities, biocompatibility, and biodegradability etc. These properties allow BC to be used in various fields, especially in industries producing medical, electronic, and food products etc. A major discrepancy associated with BC is its high production cost, usually much higher than the plant cellulose. To address this limitations, researchers have developed several strategies for enhanced production of BC including the designing of advanced reactors and utilization of various carbon sources. Another promising approach is the production of BC from waste materials such as food, industrial, agricultural, and brewery wastes etc. which not only reduces the overall BC production cost but is also environment-friendly. Besides, exploration of novel and efficient BC producing microbial strains provides impressive boost to the BC production processes. To this end, development of genetically engineered microbial strains has proven useful for enhanced BC production. In this review, we have summarized major efforts to enhance BC production in order to make it a cost-effective biopolymer. This review can be of interest to researchers investigating strategies for enhanced BC production, as well as companies exploring pilot projects to scale up BC production for industrial applications.

Nickel nanoparticles-chitosan composite coated cellulose filter paper: An efficient and easily recoverable dip-catalyst for pollutants degradation

In this report, we used cellulose filter paper (FP) as high surface area catalyst supporting green substrate for the synthesis of nickel (Ni) nanoparticles in thin chitosan (CS) coating layer and their easy separation was demonstrated for next use. In this work, FP was coated with a 1 wt% CS solution onto cellulose FP to prepare CS-FP as an economical and environment friendly host material. CS-FP was put into 0.2 M NiCl₂ aqueous solution for the adsorption of Ni²⁺ ions by CS coating layer. The Ni²⁺ adsorbed CS-FP was treated with 0.1 M NaBH₄ aqueous solution to convert the ions into nanoparticles. Thus, we achieved Ni nanoparticles-CS composite through water based in-situ preparation process. Successful Ni nanoparticles formations was assessed by FESEM and EDX analyses. FTIR used to track the interactions between nanoparticles and host material. Furthermore, we demonstrated that the nanocomposite displays an excellent catalytic activity and reusability in three reduction reactions of toxic compounds i.e. conversion of 4-nitrophenol to 4-aminophenol, 2-nitrophenol to 2-aminophenol, and methyl orange dye reduction by NaBH₄. Such a fabrication process of Ni/CS-FP may be applicable for the immobilization of other metal nanoparticles onto FP for various applications in catalysis, sensing, and environmental sciences.

Dye adsorption and bactericidal properties of TiO2/chitosan coating layer

A new kind of titanium oxide dispersed in chitosan (TiO2/CS) nanocomposite adsorbent was prepared and adhered to high surface area substrate, cellulose microfibers mat (CMM). CS-CMM and TiO2/CS-CMM were used for the thymol violet (TV) dye removal from wastewater. Characterization of materials was carried out by X-ray diffraction, scanning electron microscope and energy dispersive X-ray spectroscopy. The adsorption properties of both the CS-CMM and TiO2/CS-CMM were investigated as a function of adsorbent dosage, solution pH, and contact time. It was revealed that the composites pretreated in the solution with higher pH value exhibited larger adsorption capacities. Kinetic studies showed that the composites could adsorb TV dye rapidly and reached the equilibrium in 90min. The adsorption process followed pseudo-second order kinetics and involved particle diffusion mechanism. The calculated maximum adsorption capacities of CS-CMM and TiO2/CS-CMM were 84.32 and 97.51mgg(-1), respectively. Compare to CS, the TiO2/CS nanocomposite coated CMM showed higher antibacterial characteristics as tested against Escherichia coli.

Preparation of Calcined Zirconia-Carbon Composite from Metal Organic Frameworks and Its Application to Adsorption of Crystal Violet and Salicylic Acid

Zirconia-carbon (ZC) composites were prepared via calcination of Zr-based metal organic frameworks, UiO-66 and amino-functionalized UiO-66, under N₂ atmosphere. The prepared composites were characterized using a series of instrumental analyses. The surface area of the ZC composites increased with the increase of calcination temperature, with the formation of a graphite oxide phase observed at 900 °C. The composites were used for adsorptive removal of a dye (crystal violet, CV) and a pharmaceutical and personal care product (salicylic acid, SA). The increase of the calcination temperature resulted in enhanced adsorption capability of the composites toward CV. The composite calcined at 900 °C exhibited a maximum uptake of 243 mg·g-1, which was much greater than that by a commercial activated carbon. The composite was also effective in SA adsorption (102 mg·g-1), and N-functionalization of the composite further enhanced its adsorption capability (109 mg·g-1). CV adsorption was weakly influenced by solution pH, but was more dependent on the surface area and pore volume of the ZC composite. Meanwhile, SA adsorption showed strong pH dependence, which implies an active role of electrostatic interactions in the adsorption process. Base-base repulsion and hydrogen bonding are also suggested to influence the adsorption of CV and SA, especially for the N-functionalized composite.

CuO embedded chitosan spheres as antibacterial adsorbent for dyes

Chitosan/copper oxide (CS/CuO) composite spheres were prepared by simple mixing of CuO nanomaterials in CS solution followed by dropwise addition to NH4OH solution. The characterizations of all the prepared spheres were carried out by FESEM, EDS, XRD, XPS, and FTIR analyses while the thermal properties were analyzed by TGA. Further the ability of composite spheres was tested as an easily removable pollutant adsorbent from water containing different dyes and compared with pure CS. Composite spheres were found to be the best adsorbent when applied to remove indigo carmine (IC), congo red (CR) and methyl orange (MO) from water. Amongst the three dyes, CS/CuO composite spheres were more selective toward MO adsorption. CS/CuO composite spheres also displayed significant antibacterial activity by inhibiting Pseudomonas aeruginosa growth. Thus the fabricated composite spheres can be used as a biosorbent in the future.

Anti-bacterial PES-cellulose composite spheres: dual character toward extraction and catalytic reduction of nitrophenol

Polyethersulfone (PES) based hybrid adsorbents were used for the removal of different phenols from aqueous solutions, which are categorized as major aquatic organic pollutants.