Co amorphous systems: A product development perspective

Recent Technologies for Amorphization of Poorly Water-Soluble Drugs

Amorphization technology has been the subject of continuous attention in the pharmaceutical industry, as a means to enhance the solubility of poorly water-soluble drugs. Being in a high energy state, amorphous formulations generally display significantly increased apparent solubility as compared to their crystalline counterparts, which may allow them to generate a supersaturated state in the gastrointestinal tract and in turn, improve the bioavailability. Conventionally, hydrophilic polymers have been used as carriers, in which the amorphous drugs were dispersed and stabilized to form polymeric amorphous solid dispersions. However, the technique had its limitations, some of which include the need for a large number of carriers, the tendency to recrystallize during storage, and the possibility of thermal decomposition of the drug during preparation. Therefore, emerging amorphization technologies have focused on the investigation of novel amorphous-stabilizing carriers and preparation methods that can improve the drug loading and the degree of amorphization. This review highlights the recent pharmaceutical approaches utilizing drug amorphization, such as co-amorphous systems, mesoporous particle-based techniques, and in situ amorphization. Recent updates on these technologies in the last five years are discussed with a focus on their characteristics and commercial potential.

Co-amorphization of atorvastatin by lisinopril as a co-former for solubility improvement

The co-amorphous (CAM) technology has attracted extensive attention in recent years because it can improve the solubility and provide a formulation strategy for fixed dose combination for poorly water-soluble drugs. Atorvastatin (ATR) is a poorly water-soluble drug and it has strong anti-hyperlipidemia activity, and it is usually used in combination with lisinopril (LNP), an anti-hypertension drug. The aim of this study is to test the feasibility to develop ATR/LNP co-amorphous formulation using a cryo-milling method. The solid-state behaviors of the CAM systems were characterized by polarizing light microscopy, differential scanning calorimetry and powder X-ray diffraction. The molecular interaction between ATR and LNP was confirmed by the analysis of glass transition temperature and Fourier transform infrared spectroscopy. Compared with crystalline ATR and neat amorphous ATR, the CAM systems showed significantly increased in vitro dissolution and intrinsic dissolution rate of ATR, because LNP enhanced the supersaturation maintenance of ATR and inhibited its solution-mediated recrystallization to a certain extent.

Recent solubility and dissolution enhancement techniques for repaglinide a BCS class II drug: a review

Repaglinide is an oral blood-glucose-lowering drug used to manage type-2 diabetes mellitus by lowering post-prandial glucose by stimulating insulin secretion from pancreatic beta cells.

According to the biopharmaceutical classification system, repaglinide falls under the class II category. For such drugs, limited solubility and poor dissolution rate are the major hurdles to overcome by formulation scientists, as they hinder drug absorption and lead to inadequate therapeutic effects.

Therefore, this review aims to discuss in depth the various approaches investigated in the past five years to improve the solubility and dissolution of orally administered repaglinide: namely, solid dispersion, co-amorphous technology, cyclodextrin complexation, phospholipid complexes and polymeric micelles, nanocrystals, nanosuspensions and nanofibers.

Supersaturating drug delivery systems containing fixed-dose combination of two antihypertensive drugs: Formulation, in vitro evaluation and molecular metadynamics simulations

The purpose of this study was to associate the poorly water-soluble antihypertensive drugs candesartan cilexetil (CC) and hydrochlorothiazide (HCTZ) as fixed-dose combination, in the form of ternary Amorphous Solid Dispersions (ASD), using hydroxypropylmethylcellulose acetate succinate (HPMCAS) type M as polymeric carrier. The potential of the system to generate and to maintain supersaturation of both drugs was also evaluated. The ASDs were prepared by ball milling technique and solid-state characterization was performed by differential scanning calorimetry (DSC), Fourier transformed infrared spectroscopy (FTIR) and X-ray powder diffraction (XRPD). Interaction between drugs and polymer in solid-state was evaluated by molecular metadynamics simulations. In vitro supersaturation profiles were determined in biorelevant medium. Physicochemical stability of ASDs was also evaluated under different storage conditions. Amorphization of both drugs was confirmed by solid-state characterization techniques. Molecular metadynamics simulations indicated that CC has stronger interaction with HMPCAS than HCTZ. In vitro supersaturation studies have shown that ternary ASDs could generate and maintain supersaturation of both drugs in biorelevant medium. The polymer reduced the desupersaturation of both drugs. Ternary ASDs also showed physicochemical stability over a period of 90 days, demonstrating the potential of the polymer in reducing the drugs recrystallization over the time. Ternary ASDs of CC, HCTZ and HPMCAS can be considered a promising system to associate the drugs as fixed-dose combinations. Also, these systems generate and maintain supersaturation of both drugs in biorelevant medium, with great storage stability. HPMCAS M was a good carrier for reducing the desupersaturation of associated HCTZ and CC.

Prediction of the Synergistic Glass Transition Temperature of Coamorphous Molecular Glasses Using Activity Coefficient Models

The glass transition temperature (T_g) of a binary miscible mixture of molecular glasses, termed a coamorphous glass, is often synergistically increased over that expected for an athermal mixture due to the strong interactions between the two components. This synergistic interaction is particularly important for the formulation of coamorphous pharmaceuticals since the molecular interactions and resulting T_g strongly impact stability against crystallization, dissolution kinetics, and bioavailability. Current models that describe the composition dependence of T_g for binary systems, including the Gordon-Taylor, Fox, Kwei, and Braun-Kovacs equations, fail to describe the behavior of coamorphous pharmaceuticals using parameters consistent with experimental ΔC_P and Δα. Here, we develop a robust thermodynamic approach extending the Couchman and Karasz method through the use of activity coefficient models, including the two-parameter Margules, non-random-two-liquid (NRTL), and three-suffix Redlich-Kister models. We find that the models, using experimental values of ΔC_P and fitting parameters related to the binary interactions, successfully describe observed synergistic elevations and inflections in the T_g versus composition response of coamorphous pharmaceuticals. Moreover, the predictions from the NRTL model are improved when the association-NRTL version of that model is used. Results are reported and discussed for four different coamorphous systems: indomethacin-glibenclamide, indomethacin-arginine, acetaminophen-indomethacin, and fenretinide-cholic acid.

"Felodipine-indomethacin" co-amorphous supersaturating drug delivery systems: "Spring-parachute" process, stability, in vivo bioavailability, and underlying molecular mechanisms

Amorphous solid dispersions (ASD) are one of most commonly used supersaturating drug delivery systems (SDDS) to formulate insoluble active pharmaceutical ingredients. However, the development of polymer-guided stabilization of ASD systems faces many obstacles. To overcome these shortcomings, co-amorphous supersaturable formulations have emerged as an alternative formulation strategy for poorly soluble compounds. Noteworthily, current researches around co-amorphous system (CAS) are mostly focused on preparation and characterization of these systems, but more detailed investigations of their supersaturation ("spring-parachute" process), stability, in vivo bioavailability and molecular mechanisms are inadequate and need to be clarified. In present study, we chose pharmacological relevant BCS II drugs to fabricate and characterize "felodipine-indomethacin" CAS. To enrich the current inadequate but key knowledge on CAS studies, we carried out following highlighted investigations including dissolution/solubility, semi-continuous "spring-parachute" process, long-term stability profile of amorphous state, in vivo bioavailability and underlying molecular mechanisms (molecular interaction, molecular miscibility and crystallization inhibition). Generally, the research provides some key information in the field of current "drug-drug" CAS supersaturable formulations.

Considerations for the selection of co-formers in the preparation of co-amorphous formulations

Co-amorphous drug delivery systems are evolving as a credible alternative to amorphous solid dispersions technology. In Co-amorphous systems (CAMs), a drug is stabilized in amorphous form using small molecular weight compounds called as co-formers. A wide variety of small molecular weight co-formers have been leveraged in the preparation of CAMs. The stability and supersaturation potential of prepared co-amorphous phases largely depend on the type of co-former employed in the CAMs. However, the rationality behind the co-former selection in co-amorphous systems is poorly understood and scarcely compiled in the literature. There are various facets to the rational selection of co-former for CAMs. In this context, the present review compiles various factors affecting the co-former selection. The factors have been broadly classified under Thermodynamic, Kinetic and Pharmacokinetic-Pharmacologically relevant parameters. In particular, the importance of Glass transition, Miscibility, Liquid-Liquid phase separation (LLPS), Crystallization inhibition has been deliberated in detail.

Mechanochemistry: A Green Approach in the Preparation of Pharmaceutical Cocrystals

Mechanochemistry is considered an alternative attractive greener approach to prepare diverse molecular compounds and has become an important synthetic tool in different fields (e.g., physics, chemistry, and material science) since is considered an ecofriendly procedure that can be carried out under solvent free conditions or in the presence of minimal quantities of solvent (catalytic amounts). Being able to substitute, in many cases, classical solution reactions often requiring significant amounts of solvents. These sustainable methods have had an enormous impact on a great variety of chemistry fields, including catalysis, organic synthesis, metal complexes formation, preparation of multicomponent pharmaceutical solid forms, etc. In this sense, we are interested in highlighting the advantages of mechanochemical methods on the obtaining of pharmaceutical cocrystals. Hence, in this review, we describe and discuss the relevance of mechanochemical procedures in the formation of multicomponent solid forms focusing on pharmaceutical cocrystals. Additionally, at the end of this paper, we collect a chronological survey of the most representative scientific papers reporting the mechanochemical synthesis of cocrystals.

Combinations of Freeze-Dried Amorphous Vardenafil Hydrochloride with Saccharides as a Way to Enhance Dissolution Rate and Permeability

To improve physicochemical properties of vardenafil hydrochloride (VAR), its amorphous form and combinations with excipients-hydroxypropyl methylcellulose (HPMC) and β-cyclodextrin (β-CD)-were prepared. The impact of the modification on physicochemical properties was estimated by comparing amorphous mixtures of VAR to their crystalline form. The amorphous form of VAR was obtained as a result of the freeze-drying process. Confirmation of the identity of the amorphous dispersion of VAR was obtained through the use of comprehensive analysis techniques-X-ray powder diffraction (PXRD) and differential scanning calorimetry (DSC), supported by FT-IR (Fourier-transform infrared spectroscopy) coupled with density functional theory (DFT) calculations. The amorphous mixtures of VAR increased its apparent solubility compared to the crystalline form. Moreover, a nearly 1.3-fold increase of amorphous VAR permeability through membranes simulating gastrointestinal epithelium as a consequence of the changes of apparent solubility (P_{app crystalline VAR} = 6.83 × 10^-6 cm/s vs. P_{app amorphous VAR} = 8.75 × 10^-6 cm/s) was observed, especially for its combinations with β-CD in the ratio of 1:5-more than 1.5-fold increase (P_{app amorphous VAR} = 8.75 × 10^-6 cm/s vs. P_{app amorphous VAR:β-CD 1:5} = 13.43 × 10^-6 cm/s). The stability of the amorphous VAR was confirmed for 7 months. The HPMC and β-CD are effective modifiers of its apparent solubility and permeation through membranes simulating gastrointestinal epithelium, suggesting a possibility of a stronger pharmacological effect.

Role of Hydrogen Bonds in Formation of Co-amorphous Valsartan/Nicotinamide Compositions of High Solubility and Durability with Anti-hypertension and Anti-COVID-19 Potential

Physicochemical properties, in particular solubility and the associated bioavailability, are key factors in determining efficacy of poorly water-soluble drugs, which constitute 40% of new drugs in the market, and improving them is an important challenge for modern pharmacy. A recent strategy to achieve this goal is formation of stable co-amorphous solid dispersions with co-formers of low molecular weight. Here, the amorphization strategy was applied for low-soluble anti-hypertensive valsartan (VAL), an angiotensin II receptor blocker, and nicotinamide, which exhibits lung- and cardio-protective effects. Through interactions with the renin-angiotensin-aldosteron system, VAL may be used to treat both hypertension and the current pandemic coronavirus SARS-CoV-2 infection. Using mechanochemical and liquid- and solid-state approaches, solvated co-amorphous solid dispersions of VAL with nicotinamide were obtained. They were characterized by spectroscopic, thermal, and X-ray analyses. The density functional theory, quantum theory of atoms in molecules, and non-covalent interaction index calculations revealed the presence of two types of hydrogen bonds between VAL and NIC (i.e., N-H···O and O-H···O). One of them had a partially covalent character, which caused conformational changes in the flexible VAL molecule, restricting contribution of the tetrazolyl N-H donor and thus limiting the possibility of co-crystal formation. The recognized VAL/NIC1- and VAL/NIC2-type heterodimeric interactions were responsible for the excellent durability of the solid compositions and up to 24-fold better solubility than VAL alone. The synthesized dispersions constitute a new class of dually acting drugs, containing an active pharmaceutical ingredient (VAL) and supporting nutraceutical (nicotinamide).

Surfactant-free amorphous solid dispersion with high dissolution for bioavailability enhancement of hydrophobic drugs: a case of quercetin

At present, saccharides as hydrophilic matrixes, have been gradually used in amorphous solid dispersions (ASD) for dispersing poorly water-soluble drugs without surfactants. In this study, an amorphous chitosan oligosaccharide (COS) was applied as a water-soluble matrix to form surfactant-free ASD via the ball milling to vitrify quercetin (QUE) and enhance the dissolution and bioavailability. Solid-state characterization (DSC, XRPD, FTIR, SEM and PLM) and physical stability assessments verified that the prepared ASDs showed excellent physical stability with complete amorphization due to potential interactions between QUE and COS. In vitro sink dissolution tests suggested all QUE-COS ASDs (w:w, 1:1, 1:2 and 1:4) significantly enhanced the dissolution rate of QUE. Meanwhile, in vitro non-sink dissolution exhibited that the maximum supersaturated concentration ranged from 112.62 to 138.00 µg/mL for all QUE-COS ASDs, which was much higher than that of pure QUE. Besides, the supersaturation of QUE-COS ASD kept for at least 24 h. In rat pharmacokinetics, the oral bioavailability of QUE-COS ASDs showed 1.64 ∼ 2.25 times increase compared to the pure QUE (p < .01). Hence, the present study confirms the amorphous COS could be applied as a promising hydrophilic matrix in QUE-COS ASDs for enhancing dissolution performance and bioavailability of QUE.

Insights into co-amorphous systems in therapeutic drug delivery

Co-amorphous (CAM) systems are promising drug-delivery systems in the arena of therapeutic drug delivery, addressing the poor aqueous solubility of drugs by enhancing solubility and thereby improving the oral bioavailability and therapeutic effect of the drug. A CAM system is a single-phase homogeneous blend of two or more low molecular weight molecules that can be drug–drug or drug–co-former, stabilized via intermolecular interactions, adding the benefit of thermodynamic stability. This review covers the fundamentals of CAM systems and recent advances in formulation development. In particular, we strive to address the theoretical, molecular, technical and biopharmaceutical aspects, advantages over polymeric amorphous solid dispersions, mechanisms of stabilization of amorphous forms, insights into unexplored in silico tools in excipient selection and regulatory viewpoints.

Sinomenine-phenolic acid coamorphous drug systems: Solubilization, sustained release, and improved physical stability

Sinomenine (SIN), isolated from Caulis sinomenii, is a benzyltetrahydroisoquinoline-type alkaloid with potent anti-inflammatory and analgesic effects. SIN-HCl has been used in the forms of tablets or enteric-coated tablets in the treatment of rheumatoid arthritis in China for years, while its short half-life leads to attenuated therapeutic effects and serious side effects. In the current study, three phenolic acids, including salicylic acid (SAA), 2,3-dihydroxybenzoic acid (23DHB), and 2,4-dihydroxybenzoic acid (24DHB), were firstly employed as coamorphous coformers to prepare three binary SIN-phenolic acid coamorphous systems. These new coamorphous systems were characterized by powder X-ray diffraction (PXRD), modulated temperature differential scanning calorimetry (mDSC), and Fourier transform infrared spectroscopy (FTIR). The formation of SIN-phenolic acid coamorphous systems are supported by the absence of diffraction peaks in their PXRD spectra, as well as the single T_gs of three samples (i.e., SIN-SAA, SIN-23DHB, and SIN-24DHB) at 109.5 °C, 124.9 °C, and 135.3 °C. Importantly, the salt formation between SIN and phenolic acids was observed in FTIR. In three coamorphous systems, coamorphous SIN-24DHB shows superior physicochemical stability under both low humidity and accelerated storage conditions. They were also more soluble than crystalline SIN, while were released slower than the commercial SIN-HCl in dissolution experiments. Therefore, our study suggests that phenolic acids may be used as a new type of coformers in the preparation of coamorphous systems for active pharmaceutical ingredients.

Dual-drug amorphous formulation of gliclazide

Amorphization is a well-established strategy to enhance the dissolution properties of poorly water-soluble drugs. However, the amorphous state is inherently unstable toward recrystallization. Coamorphous systems of a drug and a small-molecule excipient or of two complementary drugs often show an enhanced stability. Diabetes and hypertension are frequently coexistent. In this paper a study on the coamorphization of the poorly water-soluble antidiabetic drug gliclazide (glz) and the antihypertensive drug valsartan (val) is reported. Amorphous glz recrystallized after 1 d under ambient conditions, whereas coamorphous glz-val containing glz and val in a 1:1 or 1:2 molar ratio was stable for at least four months at 20 °C and 56% relative humidity. The dissolution rate of glz increased in the order crystalline glz < glz-val_1:1 < glz-val_1:2. Furthermore, ternary coamorphous systems of glz, val and an excipient were prepared; glz-val_1:1_PVP, glz-val_1:1_HPC, glz-val_1:1_ALM, glz-val_1:1_MCC (PVP = polyvinylpyrrolidone, HPC = hydroxypropyl cellulose, ALM = α-lactose monohydrate, MCC = microcrystalline cellulose). MCC and HPC did not affect the stability of the coamorphous system, while ALM promoted the recrystallization of glz in glz-val_1:1_ALM during storage and freshly prepared glz-val_1:1_PVP contained small amounts of crystalline glz. Glz-val_1:1_MCC showed enhanced dissolution properties compared to crystalline glz and glz-val_1:1 and is a viable fixed-dose formulation.

Co-Amorphous Formulations of Furosemide with Arginine and P-Glycoprotein Inhibitor Drugs

In this study, the amino acid arginine (ARG) and P-glycoprotein (P-gp) inhibitors verapamil hydrochloride (VER), piperine (PIP) and quercetin (QRT) were used as co-formers for co-amorphous mixtures of a Biopharmaceutics classification system (BCS) class IV drug, furosemide (FUR). FUR mixtures with VER, PIP and QRT were prepared by solvent evaporation, and mixtures with ARG were prepared by spray drying in 1:1 and 1:2 molar ratios. The solid-state properties of the mixtures were characterized with X-ray powder diffraction (XRPD), Fourier-transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) in stability studies under different storage conditions. Simultaneous dissolution/permeation studies were conducted in side-by-side diffusion cells with a PAMPA (parallel artificial membrane permeability assay) membrane as a permeation barrier. It was observed with XRPD that ARG, VER and PIP formed co-amorphous mixtures with FUR at both molar ratios. DSC and FTIR revealed single glass transition values for the mixtures (except for FUR:VER 1:2), with the formation of intermolecular interactions between the components, especially salt formation between FUR and ARG. The co-amorphous mixtures were found to be stable for at least two months under an elevated temperature/humidity, except FUR:ARG 1:2, which was sensitive to humidity. The dissolution/permeation studies showed that only the co-amorphous FUR:ARG mixtures were able to enhance both the dissolution and permeation of FUR. Thus, it is concluded that formulating co-amorphous salts with ARG may be a promising option for poorly soluble/permeable FUR.

Physicochemical Characterization of a Co-Amorphous Atorvastatin-Irbesartan System with a Potential Application in Fixed-Dose Combination Therapy

The aim of this study was to characterize a 1:1 molar ratio of a pharmacologically relevant co-amorphous atorvastatin-irbesartan (ATR-IRB) system obtained by quench cooling of the crystalline ATR/IRB physical mixture for potential use in the fixed-dose combination therapy. The system was characterized by employing standard differential scanning calorimetry (DSC), Fourier transform-infrared spectroscopy (FT-IR), and intrinsic dissolution rate studies. Quantum mechanical calculations were performed to obtain information regarding intermolecular interactions in the studied co-amorphous ATR-IRB system. The co-amorphous formulation showed a significant improvement in the intrinsic dissolution rate (IDR) of IRB over pure crystalline as well as its amorphous counterpart. An unusual behavior was observed for ATR, as the IDR of ATR in the co-amorphous formulation was slightly lower than that of amorphous ATR alone. Short-term physical aging studies of up to 8 h proved that the ATR-IRB co-amorphous system remained in the amorphous form. Furthermore, no physical aging occurred in the co-amorphous system. FT-IR, density functional theory calculations, and analysis of T_g value of co-amorphous system using the Couchman–Karasz equation revealed the presence of molecular interactions between APIs, which may contribute to the increased physical stability.

Evaluation of Drug Dissolution Rate in Co-amorphous and Co-crystal Binary Drug Delivery Systems by Thermodynamic and Kinetic Methods

In order to better explain and predict the dissolution characteristics of binary drug delivery systems (BDDSs), the dissolution behaviors of co-crystal (CC) and co-amorphous (CA) systems of sacubitril (SCB) and valsartan (VST) were evaluated in vitro and in vivo by thermodynamic and kinetic methods. The CCs of SCB and VST were prepared into a CA state through rotary evaporation. Solid-state properties were systematically evaluated. Herein, based on the results from previous studies of single-phase systems, we used thermodynamic methods to evaluate the increase in drug dissolution rate after BDDSs change from the crystalline to the amorphous state. After comparing the predicted and measured dissolution rate enhancement of the CC and CA systems, this paper attempts to explain the dissolution rate characteristics of the BDDSs. We then evaluated the bioavailability of two BDDSs in beagle dogs to confirm that there was no discrepancy in vivo with the results obtained in vitro. The results exhibited that there is strong intermolecular interaction between SCB and VST and good physical stability for the CA system. Compared with the CC, the bioavailability of SCB and VST in the CA system increased by 313.9% and 130.5%, respectively. The predicted dissolution rate ratio between CC and CA systems and their actual intrinsic dissolution rates differed by only a factor of 2.5, demonstrating the good correlation between the predicted and measured values. In the future, this method could be expanded to a variety of new samples and exciting drug prospects.

Co-amorphous formation of piroxicam-citric acid to generate supersaturation and improve skin permeation

The objective of this study was to prepare a co-amorphous formulation of piroxicam (PIR), a non-steroidal anti-inflammatory drug, and citric acid (CA), and evaluate its skin permeation ability. A spray-drying method was employed to prepare the co-amorphous formulation and its physical properties were characterized. X-ray powder diffraction and thermal analysis confirmed a homogeneous amorphous state, and the infrared spectra revealed intermolecular interactions between PIR and CA, suggesting formation of a co-amorphous formulation of PIR and CA. The PIR-CA co-amorphous formulation exhibited no crystallization for 60 days at 4/25/40°C with silica gel. The PIR-CA co-amorphous formulation increased the solubility of PIR in polyethylene glycol 400 compared with that of the pure drug, and physical mixture (PM) of PIR and CA, confirming a supersaturated state in the formulation. The PIR-CA co-amorphous formulation demonstrated higher skin permeation than PIR alone or PM of PIR and CA, and the flux value was consistent with the degree of saturation. Thus, the increase in the skin permeation of PIR from the PIR-CA co-amorphous formulation directly depended on the increased thermodynamic activity by supersaturation in the absence of interactions between the drug and co-former in the vehicle.

Overview of Extensively Employed Polymeric Carriers in Solid Dispersion Technology

Solid dispersion is the preferred technology to prepare efficacious forms of BCS class-II/IV APIs. To prepare solid dispersions, there exist a wide variety of polymeric carriers with interesting physicochemical and thermochemical characteristics available at the disposal of a formulation scientist. Since the advent of the solid dispersion technology in the early 1960s, there have been more than 5000 scientific papers published in the subject area. This review discusses the polymeric carrier properties of most extensively used polymers PVP, Copovidone, PEG, HPMC, HPMCAS, and Soluplus® in the solid dispersion technology. The literature trends about preparation techniques, dissolution, and stability improvement are analyzed from the Scopus® database to enable a formulator to make an informed choice of polymeric carrier. The stability and extent of dissolution improvement are largely dependent upon the type of polymeric carrier employed to formulate solid dispersions. With the increasing acceptance of transfer dissolution setup in the research community, it is required to evaluate the crystallization/precipitation inhibition potential of polymers under dynamic pH shift conditions. Further, there is a need to develop a regulatory framework which provides definition and complete classification along with necessarily recommended studies to characterize and evaluate solid dispersions.

Predictive identification of co-formers in co-amorphous systems

This work aims to understand the properties of co-formers that form co-amorphous pharmaceutical materials and to predict co-amorphous system formation. A partial least square - discriminant analysis (PLS-DA) was performed using known co-amorphous systems described by 36 variables based on the properties of the co-former and the binding energy of the system. The PLS-DA investigated the propensity to form co-amorphous material of the active pharmaceutical ingredients: mebendazole, carvedilol, indomethacin, simvastatin, carbamazepine and furosemide in combination with 20 amino acid co-formers. The variables that were found to favour the propensity to form co-amorphous systems appear to be a relatively large value for average molecular weight and the sum of the difference between hydrogen bond donors and hydrogen bond acceptors for both components, and a relatively small or negative value for excess enthalpy of mixing, excess enthalpy of hydrogen bonding and the difference in the Hansen parameter for hydrogen bonding of the coformer and the active pharmaceutical ingredient (API). To test the predictive power of this model, 29 potential co-formers were used to form either co-amorphous or crystalline two-component materials with mebendazole. Of these 29 two-component systems, the co-amorphous nature of a total of 26 materials was correctly predicted by the model, giving a predictive hit rate of 90 %.

Comparison of co-former performance in co-amorphous formulations: Single amino acids, amino acid physical mixtures, amino acid salts and dipeptides as co-formers

Co-amorphous systems have been shown to be a potential approach to address the poor water solubility challenge of many drugs. Various low molecular weight molecules, especially amino acids, have been used as potential co-formers. In this study, the differences between various combinations of amino acid-based systems, i.e. the single amino acids glutamic acid (Glu) and arginine (Arg), their physical mixture, glutamic acid-arginine crystalline and amorphous salts, and the corresponding dipeptides (GluArg, ArgGlu), were investigated. Mebendazole (Meb) was used as the model drug. Pure Meb and Meb-co-former mixtures were ball milled to prepare the co-amorphous samples. The shortest amorphization time upon ball milling (30 min) was found for Meb mixtures with the dipeptides and the Glu·Arg amorphous salt. All other samples became amorphous upon milling for 90 min, except Meb-Glu, where Glu remained partially crystalline. Both, single-phase (Meb-Glu-Arg ternary mixtures) and two-phase amorphous systems (Meb-Arg, Meb-GluArg, Meb-ArgGlu) were obtained for different Meb-co-former mixtures after milling. Whilst all co-formers improved the dissolution rate of Meb in a similar fashion (dissolution rate increased by 3.5 to 5.7-fold with respect to crystalline Meb), the highest stability improvement was observed for Meb-dipeptide systems. Interestingly, even though being a two-phase amorphous system, dipeptides were superior to the other co-formers as they possessed higher physical stability.

Physical stability of amorphous pharmaceutical solids: Nucleation, crystal growth, phase separation and effects of the polymers

Compared to their crystalline forms, amorphous pharmaceutical solids present marvelous potential and advantages for effectively improving the oral bioavailability of poorly water-soluble drugs. A central issue in developing amorphous pharmaceutical solids is the stability against crystallization, which is particularly important for maintaining their advantages in solubility and dissolution rate. This review provides a comprehensive overview of recent studies focusing on the physical stability of amorphous pharmaceutical solids affected by nucleation, crystal growth, phase separation and the addition of polymers. Moreover, we highlight the novel technologies and theories in the field of amorphous pharmaceutical solids. Meanwhile, the challenges and strategies in maintaining the physical stability of amorphous pharmaceutical solids are also discussed. With a better understanding of physical stability, the more robust amorphous pharmaceutical formulations with desired pharmaceutical performance would be easier to achieve.

Formulation of co-amorphous systems from naproxen and naproxen sodium and in situ monitoring of physicochemical state changes during dissolution testing by Raman spectroscopy

Co-amorphous systems comprising low-molecular weight drugs and co-formers constitute an interesting approach to optimize pharmaceutical performance of drugs with low aqueous solubility. Within the different types of co-amorphous systems, the combination of a drug with its own salt may be an attractive formulation option due the absence of any inactive co-formers. The aim of this study was to investigate the possibility of forming a co-amorphous system from naproxen (NAP) and its sodium salt (NAP(Na)). Ball milling of NAP and NAP(Na) at equal molar ratio resulted in the formation of a co-amorphous system whilst NAP and NAP(Na) alone were crystalline following both, ball milling and melt quenching. Infrared spectroscopy and physical stability testing revealed that intermolecular interactions were able to maintain the ball milled NAP-NAP(Na) system amorphous for 2 months at 40 °C. Surprisingly, the dissolution rate of co-amorphous NAP-NAP(Na) was only intermediate between those of crystalline NAP and crystalline NAP(Na). In situ Raman spectroscopic measurements indicated an initial phase separation of the co-amorphous form to NAP and NAP(Na) followed by dissociation of sodium from NAP(Na) and crystallization to NAP. These findings contribute to the design of co-amorphous formulations with the combination of a drug and its own salt.

Effect of Spray Drying on Amorphization of Indomethacin Nicotinamide Cocrystals; Optimization, Characterization, and Stability Study

Cocrystals have gained a lot of consideration regarding its superior role in enhancement of solubility and dissolution of the included API. Cocrystals could be converted to coamorphous systems via different techniques like milling and quench cooling; however, the use of spray-drying technique has not been investigated before. So, the aim of this study was to explore the effect of spray drying on the amorphization of indomethacin/nicotinamide, INDNIC, as model cocrystals. Spray-drying operating parameters were optimized using the Taguchi design of experiment for maximum powder yield and low moisture content. The obtained INDNIC spray-dried cocrystals were characterized for their degree of crystallinity, morphology, moisture content, and dissolution performance. In addition, stability study was performed at different temperature and humidity conditions. Experimental design results delineate that spray-drying inlet temperature and cocrystal concentrations as the most influential factors for maximum powder yield and low moisture content. Powder X-ray diffraction and differential scanning calorimetry studies revealed the conversion of INDNIC cocrystals to a partial coamorphous or coamorphous structure without dissociation of INDNIC molecular structure. INDNIC coamorphous powders showed a significantly higher release of IND compared with cocrystals and remain physically stable for 2 months when stored in the refrigerator.

Dissolution and Permeability Properties of Co-Amorphous Formulations of Hydrochlorothiazide

A biopharmaceutics classification system class IV drug, hydrochlorothiazide (HCT), was combined with co-formers of L-and d-arginine (ARG) and sodium lauryl sulphate (SLS) by cryomilling in 1:1 molar ratio. Co-amorphization was observed with L- and D-ARG. These mixtures showed a single glass transition, evidence of possible salt formation and improved physical stability at elevated temperatures and/or humidity when compared with amorphous HCT. The co-amorphous formulations, along with the combinations of HCT and HCT:L-ARG with polyvinylpyrrolidone (PVP) in 1:1 mass ratio, were investigated with a simultaneous dissolution/permeation setup using parallel artificial membrane permeability assay (PAMPA) or Madine Darby kidney cells (MDCKII) as the permeation barrier. It was observed that co-amorphization with L-ARG and D-ARG was able to induce a supersaturated state for HCT, possibly through intermolecular interactions, but there was virtually no difference between the dissolution properties of the mixtures formed with the 2 optical isomers of ARG. The permeability of HCT was found to be dependent on the dissolution properties of the formulations in both PAMPA and cellular barrier experiments. Thus, co-amorphization of HCT with L- and D-ARG demonstrated the possibility to enhance the dissolution and thereby the permeation potential of a BCS class IV drug.

Characterization and therapeutic efficacy evaluation of glimepiride and L-arginine co-amorphous formulation prepared by supercritical antisolvent process: Influence of molar ratio and preparation methods

The glimepiride/L-arginine (GA) binary systems were prepared at various molar ratios by using a supercritical antisolvent (SAS) process. For comparison, the GA system was also prepared by physical mixing (PM), melt quenching (MQ), and solvent evaporation (SE) methods. Analyses by DSC and PXRD showed that only the GA binary mixture at 1:1 M ratio prepared by the SAS process was a pure co-amorphous mixture with an excellent content uniformity. On the other hand, GA mixture prepared by PM and SE were not pure co-amorphous systems and contained crystalline eutectic mixture, and MQ method at 170 °C induced the decrease in drug content due to decomposition of glimepiride. The positive deviation of experimentally measured glass transition temperature (T_g) compared to predicted T_g by the Gordon Taylor equation suggests specific molecular interactions between glimepiride and L-arginine in solid-state GA co-amorphous (GACA) mixture. The intermolecular interactions between glimepiride and L-arginine in GACA system were characterized by FT-IR and solid-state NMR analyses. Improved glimepiride dissolution rate of GACA formulation were confirmed using the solubility test, contact angle measurement, and dissolution test. Furthermore, the evaluation of pharmacodynamic hypoglycemic effect demonstrated that GACA prepared by the SAS process significantly improved the therapeutic efficacy of glimepiride.

Enhanced Physical Stability and Synchronized Release of Febuxostat and Indomethacin in Coamorphous Solids

Coamorphous formulation, a homogeneous monophasic amorphous system composed of multiple components, has been demonstrated as an effective approach for delivering drugs with poor aqueous solubility. In this study, we prepared the coamorphous system composed of two poorly soluble drugs febuxostat (FEB) and indomethacin (IMC) by using cryogenic milling. The combination of these two drugs in the coamorphous form can attain a synergistic effect, especially on gout therapy. Coamorphous solid of FEB and IMC in 1:1 molar ratio exhibited superior physical stability compared with the individual amorphous components, as evidenced by X-ray powder diffractions after 30 days of storage at ambient and elevated temperature. In addition, the FEB-IMC coamorphous system has been demonstrated to show enhanced dissolution performance. The intrinsic dissolution rates of two components in the coamorphous system exhibited the synchronized drug release. Based on the FT-IR spectroscopy, the excellent physical stability and synchronized release of FEB-IMC coamorphous system could be attributed to the heterodimer structure formed by strong hydrogen bonding interactions between these drugs. Furthermore, the supersaturation potential of FEB-IMC coamorphous solids was also investigated through the cosolvent quenching method. The FEB-IMC coamorphous system can effectively inhibit the fast crystallization of FEB in the supersaturated solution. However, the maximum achievable supersaturation of IMC in the coamorphous system decreases to only one fifth of that achieved for the pure amorphous IMC. These results are relevant for understanding the physical stability and complex solution behaviors of the coamorphous formulation.

A novel drug–drug coamorphous system without molecular interactions: improve the physicochemical properties of tadalafil and repaglinide

Tadalafil and repaglinide, categorized as BCS class II drugs, have low oral bioavailabilities due to their poorly aqueous solubilities and dissolutions. The aim of this study was to enhance the dissolution of tadalafil and repaglinide by co-amorphization technology and evaluate the storage and compression stability of such coamorphous system. Based on Flory–Huggins interaction parameter (χ ≤ 0) and Hansen solubility parameter (δ_t ≤ 7 MPa^0.5) calculations, tadalafil and repaglinide was predicted to be well miscible with each other. Coamorphous tadalafil–repaglinide (molar ratio, 1 : 1) was prepared by solvent-evaporation method and characterized with respect to its thermal properties, possible molecular interactions. A single T_g (73.1 °C) observed in DSC and disappearance of crystallinity in PXRD indicated the formation of coamorphous system. Principal component analysis of FTIR in combination with Raman spectroscopy and Ss ¹³C NMR suggested the absence of intermolecular interactions in coamorphous tadalafil–repaglinide. In comparison to pure crystalline forms and their physical mixtures, both drugs in coamorphous system exhibited significant increases in intrinsic dissolution rate (1.5–3-fold) and could maintain supersaturated level for at least 4 hours in non-sink dissolution. In addition, the coamorphous tadalafil–repaglinide showed improved stability compared to the pure amorphous forms under long-term stability and accelerated storage conditions as well as under high compressing pressure. In conclusion, this study showed that co-amorphization technique is a promising approach for improving the dissolution rate of poorly water-soluble drugs and for stabilizing amorphous drugs.

The coamorphous tadalafil–repaglinide (molar ratio, 1 : 1) prepared by solvent-evaporation method significantly improve the physicochemical properties of tadalafil and repaglinide.

Solid-state properties, solubility, stability and dissolution behaviour of co-amorphous solid dispersions of baicalin

Formation of different baicalin co-former based solid dispersion formulations, which demonstrate improved solubility and dissolution performance.

Enhancing the stability of amorphous drug-polyelectrolyte nanoparticle complex using a secondary small-molecule drug as the stabilizer: A case study of ibuprofen-stabilized curcumin-chitosan nanoplex

While the solubility enhancement capability of amorphous drug-polyelectrolyte nanoparticle complex (nanoplex) has been widely established, its amorphous form stability during long-term storage is often lacking for poorly-soluble drugs with high crystallization propensity, such as curcumin (CUR). Herein we presented a new stabilization strategy of amorphous CUR nanoplex using a secondary small-molecule drug - ibuprofen (IBU) - as the auxiliary stabilizer to the polyelectrolytes (i.e. chitosan). The results showed that, unlike the single-drug CUR nanoplex, the dual-drug CUR-IBU nanoplex with CUR/IBU payload ratio of 1.7 remained stable after 24-month storage. The CUR-IBU nanoplex also exhibited superior CUR solubility enhancement (4-fold higher) than the CUR nanoplex. These improvements, however, were not evident for the CUR-IBU nanoplex prepared at higher CUR/IBU payload ratio of 14 due to insufficient IBU presence. Compared to the CUR nanoplex, the CUR-IBU nanoplex exhibited smaller size with less spherical morphology (100 nm), higher zeta potential (42 versus 19 mV), lower total drug payload (73% versus 83%), and lower CUR utilization rate (53% versus 94%) due to the competition with IBU in the drug-PE complexation. These results successfully established the use of a secondary drug to not only stabilized, but also improved solubility enhancement of amorphous drug nanoplex systems.

Preparation of Amorphous Composite Particles of Drugs with Ursodeoxycholic Acid as Preclinical Formulations

We studied the possibility of using ursodeoxycholic acid (UDCA) as an excipient to create an amorphous composite that can be administered to animals in preclinical studies of experimental drugs. Three UDCA-based amorphous samples composed of nifedipine (NIF), indomethacin (IND), and naproxen (NAP) were found by screening. The UDCA-based formulations were adjudged amorphous by solid-state analysis using X-ray powder diffraction and differential scanning calorimetry. In addition, amorphous samples of NIF-UDCA, IND-UDCA, and NAP-UDCA did not crystallize while in 1% methyl cellulose (MC) solution for 120 min, although an amorphous solid dispersion of NIF-poly(vinylpyrrolidone) (PVP) crystallized rapidly. The low hygroscopicity of UDCA helps NIF maintain an amorphous state in 1% MC solution. The UDCA-based amorphous composites can be administered as suspended formulations to animals in preclinical studies.

Co amorphous valsartan nifedipine system: Preparation, characterization, in vitro and in vivo evaluation

Co amorphous systems are supersaturated drug delivery systems which offer a basic platform for delivery of multicomponent adducts (combination of more than one active pharmaceutical ingredient (API)) and/or as a fixed dose combination therapy, in addition to their potential to improve the apparent solubility, dissolution rate and ultimately bioavailability of poorly water soluble APIs. In the present work, a new drug-drug co amorphous system namely valsartan-nifedipine was prepared by quench cooling technique. Prepared co amorphous system was characterized for its solid state behavior with the help of Fourier Transform Infrared spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and Powder X Ray Diffractometry (PXRD). The optimized co amorphous system was stable for 1 month when exposed to accelerated stability condition (40 ± 2 °C and 75 ± 5% RH). The improved stability of amorphous nifedipine in co amorphous system was attributed to improved miscibility and intra and intermolecular non-covalent interactions mainly due to presence of hydrogen bonding between valsartan and nifedipine which was studied by FTIR analysis. Co amorphous systems were evaluated by mainly in vitro dissolution and in vivo benefit. In vitro dissolution study showed nearly 5.66 folds and 1.61 folds improvement which was translated to 3.63 and 2.19 times enhancement in vivo C_max for nifedipine and valsartan respectively.

New insight into transdermal drug delivery with supersaturated formulation based on co-amorphous system

The objective of this study was to prepare a supersaturated formulation based on formation of a co-amorphous system of a drug and a coformer in order to enhance skin permeation. Atenolol (ATE) and urea (URE) were used as the model drug and the coformer, respectively. Thermal analysis of physical mixtures of ATE and URE showed decreases in the melting points and the formation of a co-amorphous system which was in a supercooled liquid state because of a low glass transition temperature. Supersaturated solutions of ATE and URE at different molar ratios in polyethylene glycol 400 (PEG400) were prepared. The precipitations were observed under storage at 25 °C for all formulations except for ATE-URE at 1:8 molar ratio which remained in the supersaturated state for 2 months. ¹H NMR analysis confirmed the interactions between ATE and URE in PEG400. The ATE-URE supersaturated formulation showed higher permeability for mice skin than that of ATE saturated formulation, which was superior to the expected permeability from the degree of supersaturation. We concluded that co-amorphous based supersaturated formulation offers much promise for transdermal drug delivery.

Selecting Excipients Forming Therapeutic Deep Eutectic Systems-A Mechanistic Approach

The majority of all newly identified active pharmaceutical ingredients (APIs) have a low solubility in water (partly smaller than marble). In order to enhance their solubility and bioavailability, the formulation of these APIs, as part of therapeutic deep eutectic systems (THEDES), has been recently shown to be a promising approach. By choosing the right excipient, the melting point of the API/excipient mixture can be lowered below body temperature or even room temperature, resulting in a liquid formulation. To date, because of a lack of mechanistic understanding of how THEDES are formed, the identification of suitable excipients for a given API is almost exclusively based on heuristic decisions and trial-and-error-based approaches. This is both very time-consuming and expensive. The purpose of this work is to reduce the experimental effort to identify suitable excipients for a given API solely based on the melting properties (melting temperature and melting enthalpy) of the API and excipient and accounting for intermolecular interactions via a predictive thermodynamic model [in this case, UNIFAC(Do)]. Lidocaine, ibuprofen, and phenylacetic acid were considered as model APIs, whereas thymol, vanillin, lauric acid, para-toluic acid, benzoic acid, and cinnamic acid were considered as model excipients. The formation of THEDES from these components was predicted and confirmed using differential scanning calorimetry. The results indicate that the experimental effort for the identification of suitable API/excipient combinations can be drastically reduced by thermodynamic modeling, leading to more efficient and tailor-made formulations in the future.

An update on the contribution of hot-melt extrusion technology to novel drug delivery in the twenty-first century: part II

INTRODUCTION

Interest in hot-melt extrusion (HME) technology for novel applications is growing day by day, which is evident from several hundred publications within the last 5 years. HME is a cost-effective, solvent free, 'green' technology utilized for various formulations with low investment costs compared to conventional technologies. HME has also earned the attention of the pharmaceutical industry by the transformation of this technology for application in continuous manufacturing.

AREAS COVERED

Part II of the review focuses on various novel opportunities or innovations of HME such as multiple component systems (co-crystals, co-amorphous systems and salts), twin-screw granulation, semi-solids, co-extrusion, abuse deterrent formulations, solid self-emulsifying drug delivery systems, chronotherapeutic drug delivery systems, and miscellaneous applications.

EXPERT OPINION

HME is being investigated as an alternative technology for preparation of multicomponent systems such as co-crystals and co-amorphous techniques. Twin-screw granulation has gained increased interest in preparation of granules via twin-screw melt granulation or twin-screw dry granulation. This novel application of the HME process provides a promising alternate approach in the formulation of granules and solid dosage forms. However, this technology may need to be further investigated for scalability aspects of these novel applications for industrial production.

Miniaturized Measurement of Drug-Polymer Interactions via Viscosity Increase for Polymer Selection in Amorphous Solid Dispersions

Drug-polymer interactions have a substantial impact on stability and performance of amorphous solid dispersions (ASD) but are difficult to analyze. Whereas there are many screening methods described for polymer selection based for example on glass forming ability, drug-polymer miscibility, supersaturation, or inhibition of recrystallization, the distinct detection of physico-chemical interactions mostly lacks miniaturized techniques. This work presents an interaction screening assessing the relative viscosity increase between highly concentrated polymer solutions with and without the model drug ketoconazole (KTZ). The fluorescent molecular rotor 9-(2-carboxy-2-cyanovinyl)julolidine was added to the solutions in a miniaturized setup in μL-scale. Due to its environment-sensitive emission behavior, the integrated fluorescence intensity can be used as a viscosity dye within this screening approach (FluViSc). Differences in relative viscosity increases through addition of KTZ were proposed to rank polymers regarding KTZ-polymer interactions. Absolute viscosities were measured with a cone-plate rheometer as a complimentary method and supported the results acquired by the FluViSc. Solid-state nuclear magnetic resonance (ss-NMR) relaxation time measurements and Raman spectroscopy were utilized to investigate drug-polymer interactions at a molecular level. Whereas Raman spectroscopy was not suited to reveal KTZ-polymer interactions, ss-NMR relaxation time measurements differentiated between the selected polymeric carriers hydroxypropylmethylcellulose acetate succinate (HPMCAS) and polyvinylpyrrolidone vinyl acetate 60:40 (PVP-VA64). Interactions were detected for HPMCAS/KTZ ASD while there was no hint for interactions between KTZ and PVP-VA64. These results were in correlation with the FluViSc. The findings were correlated with the dissolution performance of ASD and found to be predictive for supersaturation and inhibition of precipitation during dissolution.

Application of Co-Amorphous Technology for Improving the Physicochemical Properties of Amorphous Formulations

Co-amorphous technology was recently introduced to stabilize drugs in the amorphous state for drug development. We examined the predictability of the formation of co-amorphous systems and identified two reliable indicators of successful formation: (1) a negative Δ H_mix value and (2) small Δlog P between components. Moreover, we found that the stability of co-amorphous systems was improved when (1) Δ H_mix was negative and (2) amorphous forms of the constituent compounds were stable. Furthermore, we concluded that co-amorphous systems with small (negatively large) Δ H_mix values had lower hygroscopicity. Typically, amorphous solid dispersions exhibit hygroscopicity because polymers exhibit large hygroscopicity. We proved the superiority of co-amorphous technology over amorphous solid dispersion in this respect. Our results provide methods for (1) establishing a screening method and (2) improving hygroscopicity, which may make co-amorphous technology more useful than amorphous solid dispersion technology.

Highly Soluble Glimepiride and Irbesartan Co-amorphous Formulation with Potential Application in Combination Therapy

One-third of the population of the USA suffers from metabolic syndrome (MetS). Treatment of patients with MetS regularly includes drugs prescribed simultaneously to treat diabetes and cardiovascular diseases. Therefore, the development of novel multidrug formulations is recommended. However, the main problem with these drugs is their low solubility. The use of binary co-amorphous systems emerges as a promising strategy to increase drug solubility. In the present study, irbesartan (IBS) and glimepiride (GMP), class II active pharmaceutical ingredients (API), widely used in the treatment of arterial hypertension and diabetes, were selected to develop a novel binary co-amorphous system with remarkable enhancement in the dissolution of both APIs. The phase diagram of IBS-GMP was constructed and co-amorphous systems were prepared by melt-quench, in a wide range of compositions. Dissolution profile (studied at pH 1.2 and 37°C for mole fractions 0.01, 0.1, and 0.5) demonstrated that the x_GMP = 0.01 formulation presents the highest enhancement in its dissolution. GMP went from being practically insoluble to reach 3.9 ± 0.9 μg/mL, and IBS showed a 12-fold increment with respect to the dissolution of its crystalline form. Infrared studies showed that the increase in the dissolution profile is related to the intermolecular interactions (hydrogen bonds), which were dependent of composition. Results of structural and thermal characterization performed by XRD and DSC showed that samples have remained in amorphous state for more than 10 months of storage. This work contributes to the development of a highly soluble co-amorphous drugs with potential used in the treatment of MetS.

Advances in coamorphous drug delivery systems

In recent years, the coamorphous drug delivery system has been established as a promising formulation approach for delivering poorly water-soluble drugs. The coamorphous solid is a single-phase system containing an active pharmaceutical ingredient (API) and other low molecular weight molecules that might be pharmacologically relevant APIs or excipients. These formulations exhibit considerable advantages over neat crystalline or amorphous material, including improved physical stability, dissolution profiles, and potentially enhanced therapeutic efficacy. This review provides a comprehensive overview of coamorphous drug delivery systems from the perspectives of preparation, physicochemical characteristics, physical stability, in vitro and in vivo performance. Furthermore, the challenges and strategies in developing robust coamorphous drug products of high quality and performance are briefly discussed.

Co-amorphous palbociclib–organic acid systems with increased dissolution rate, enhanced physical stability and equivalent biosafety

The preparation of co-amorphous drug systems by adding a small molecular excipient is a promising formulation in the modern pharmaceutical industry to improve the solubility, dissolution rate, and bioavailability of poorly soluble drugs. In this study, palbociclib co-amorphous systems with organic acids (succinic, tartaric, citric, and malic acid) at molar ratios of 1 : 1 were prepared by co-milling and characterized by differential scanning calorimetry (DSC), fourier transform infrared spectroscopy (FTIR) and solid-state nuclear magnetic resonance (SS-NMR). These solid-state investigations have confirmed the formation of co-amorphous salts between PAL and organic acids. The solubility, dissolution rate and stability of the four co-amorphous drug systems were significantly improved compared with these of crystalline and amorphous palbociclib. The biosafety of the co-amorphous drug systems was the same as that of palbociclib without affecting the efficacy of the drug and eliciting toxic side effects. These comprehensive approaches for the palbociclib–acid co-amorphous drug systems provided a theoretical basis for its clinical applications.

The study of co-amorphous systems presented a safe and effective formulation technology for the development of new palbociclib solid forms with great dissolution rates, good physical stability, and high bioavailability.

Mechanochemical synthesis of brexpiprazole cocrystals to improve its pharmaceutical attributes

In the present study, cocrystallization of a new piprazole analogue drug, brexpiprazole (BREX), with coformers such as succinic acid and catechol was carried out using ball milling to address the poor solubility and dissolution rate of the molecule.