Formation and stabilization of nanoemulsion-based vitamin E delivery systems using natural surfactants: Quillaja saponin and lecithin

Pomegranate seed oil nanoemulsion enriched by α-tocopherol; the effect of environmental stresses and long-term storage on its physicochemical properties and oxidation stability

In this study, pomegranate seed oil (PSO) nanoemulsions loading different amounts of α-tocopherol (0-40%) were produced. The nanoemulsions were fabricated by ultra-sonication method and the influence of thermal treatment (20-90 °C), pH (2-8) and ionic strength (0-500 mM NaCl) were investigated on physicochemical properties of all treatments. Moreover, the oxidative stability and α-tocopherol degradation were also assessed on optimal enriched nanoemulsion formulation during 50-day storage. The droplet diameter, viscosity, antioxidant activity, encapsulation efficiency and loading capacity of optimal formulation were 37.5 nm, 514 cp, 92%, 3.45% and 92.5%, respectively. The peroxide value changed in the range of 4.5-5.3 and 6.7-10.5 meq O₂/kg in loaded and unloaded nanoemulsions, respectively. Transmission electron microscopy demonstrated spherical morphology of nanoemulsion droplets with diameter average of 40 nm. This study suggested that PSO nanoemulsion loading α-tocopherol could be introduced as delivery system with favorable features under severe environmental conditions.

Potential of Nanonutraceuticals in Increasing Immunity

Nutraceuticals are defined as foods or their extracts that have a demonstrably positive effect on human health. According to the decision of the European Food Safety Authority, this positive effect, the so-called health claim, must be clearly demonstrated best by performed tests. Nutraceuticals include dietary supplements and functional foods. These special foods thus affect human health and can positively affect the immune system and strengthen it even in these turbulent times, when the human population is exposed to the COVID-19 pandemic. Many of these special foods are supplemented with nanoparticles of active substances or processed into nanoformulations. The benefits of nanoparticles in this case include enhanced bioavailability, controlled release, and increased stability. Lipid-based delivery systems and the encapsulation of nutraceuticals are mainly used for the enrichment of food products with these health-promoting compounds. This contribution summarizes the current state of the research and development of effective nanonutraceuticals influencing the body's immune responses, such as vitamins (C, D, E, B12, folic acid), minerals (Zn, Fe, Se), antioxidants (carotenoids, coenzyme Q10, polyphenols, curcumin), omega-3 fatty acids, and probiotics.

Nanotechnology in Food Systems: A Review

Recent developments of nanotechnology find its way into various fields of food production in our days. Nanotechnology could offer benefits in development of food products with enhanced functionality for health promotion, or modified texture convenient for elderly, and in quality and safety issues in the food supply chain. Nanoencapsulated bioactive components such as vitamins, antibacterial agents contribute to production of enriched food stuffs with the required appearance, flavour, taste, and texture. Nanomaterials can protect the sensitive compounds from environmental attack, release them in a programmed way, and provide favourable improvement in the bioavailability of nutraceuticals. The innovative approach in food packaging, including the detection, indication, and control of food products, serves the quality and safety improvements.

Formulation and characterization of oil-in-water nanoemulsions stabilized by crude saponins isolated from onion skin waste

In the current work, a detailed study of crude saponins isolated from onion skin waste (OSW) was carried out to minimize the interfacial tension (γ) at oil-water interfaces, and to evaluate important factors on the formulation and characterization of nanoemulsions (NEs) stabilized by OSW saponins as a new natural emulsifier. It was found that OSW saponins are moderately strong surface-active agents. The droplet size of OSW saponin-stabilized NEs formulated by a high-pressure homogenizer was significantly dependent on processing parameters, where volume mean droplet diameter (d _4,3) decreased as homogenization pressure and emulsifier concentration increased. The d _4,3 of NEs formulated from soybean oil, sunflower oil, and medium-chain triglyceride (MCT) oil was <140 nm, which was much smaller than those prepared using orange oil (d _4,3 > 800 nm). The OSW saponin-coated droplets in soybean-based NEs showed stability against thermal treatment (30-90 °C, 30 min), pH (7-9), and ionic strength (NaCl < 50 mM). The NEs exhibited instability with droplet coalescence at relatively low pH (3-6), and high ionic strength (NaCl > 50 mM). The NEs stabilized by 0.5-1% (w/w) OSW were highly stable without an increase in d _4,3 during the storage (60 days) at 25 °C. Overall, these results suggest that OSW saponins are an efficient natural emulsifier, with significant potential to replace synthetic emulsifiers in certain practical applications.

Pectin-peptide complexes ameliorated physicochemical stabilities and in vitro digestion abilities of β-carotene loaded emulsions

To improve the stabilities of low methoxy pectin (LMP) stabilized O/W emulsions for the delivery of bioactive substances, LMP was firstly modified with soy peptide (SP), corn peptide (CP) and whey protein peptide (WPP), respectively, by using dry-heat method, then the properties of LMP-peptide complexes stabilized O/W emulsions were characterized and the in vitro digestion of emulsions with β-carotene was test to evaluate the potential applications. LMP-peptide complexes were formed by covalent bonds according to FT-IR spectroscopy. Compared to LMP stabilized emulsions, LMP-peptide complexes stabilized emulsions had smaller droplet sizes and higher stabilities in the changed pH value, temperature and ionic strength. Based on the results of in vitro digestion tests, LMP-SP and LMP-WPP obtained by incubating LMP with peptides at 60 °C for 12 h at the weight ratio of 4:1 were more suitable for the preparation of O/W emulsions to deliver camellia oil and β-carotene.

A biotin-guided hydrogen sulfide fluorescent probe and its application in living cell imaging

Hydrogen sulfide (H2S), a well-known signaling molecule, exerts significant regulatory effects on the cardiovascular and nervous systems. Therefore, monitoring the metabolism of H2S offers a potential mechanism to detect various diseases. In addition, biotin is significantly used as a targeting group to detect cancer cells exclusively. In this work, a biotin-guided benzoxadizole-based fluorescent probe, NP-biotin, was developed for H2S detection and evaluated in normal liver cell (LO2) and liver cancer cell (HepG2) lines. Results reveal that NP-biotin can detect cellular H2S with high sensitivity and selectivity. Moreover, NP-biotin has been confirmed to possess the ability to target cancer cells under the guidance of the biotin group.

Formation and stability of emulsions stabilized by Quillaja saponin-egg lecithin mixtures

Knowledge of binary emulsifiers' influence on the formation and stability of emulsion-based products is still limited. The aim of this study was to investigate the emulsifying properties of Quillaja saponin-egg lecithin mixtures at different concentration ratios (r = 5:0, 4:1, 3:2, 2:3, 1:4, and 0:5) with total emulsifier concentration set to 0.5% or 1.0% (w/w). For this, oil-in-water emulsions (10% oil, pH 7) were prepared via high-pressure homogenization. Furthermore, emulsion stability against different environmental stresses was tested. All the binary emulsifier mixtures formed submicron sized emulsions upon homogenization. The most stable emulsions among the mixed emulsifiers were obtained at low Quillaja saponin concentration at r = 1:4 that showed similar physical stability over time to emulsions stabilized by Quillaja saponins and egg lecithin alone. The data suggested that the mixtures of Quillaja saponins and egg lecithins built mixed interfacial layers that were prone to changes over time. Emulsions stabilized by the binary mixtures were in general less stable against changes in pH and ionic strength than the emulsions stabilized by the individual emulsifiers. An exception were the emulsions at r = 1:4 that showed improved stability at pH 2 over the phase separated Quillaja saponin-stabilized emulsions at the same pH. Moreover, all the emulsions were heat stable up to 90 °C. On the other hand, none of the emulsions were stable upon freeze-thawing. These results increase our understanding of technofunctionality of binary emulsifier systems. PRACTICAL APPLICATION: Food-grade and natural emulsifier mixtures composed of Quillaja saponins and egg lecithin may be used in selected emulsion-based food or personal care product applications to replace synthetic surfactants due to issues with consumer acceptance and regulatory restrictions.

Formulation and Optimization of Nanoemulsions Using the Natural Surfactant Saponin from Quillaja Bark

Replacing synthetic surfactants by natural alternatives when formulating nanoemulsions has gained attention as a sustainable approach. In this context, nanoemulsions based on sweet almond oil and stabilized by saponin from Quillaja bark with glycerol as cosurfactant were prepared by the high-pressure homogenization method. The effects of oil/water (O/W) ratio, total surfactant amount, and saponin/glycerol ratio on their stability were analyzed. The formation and stabilization of the oil-in-water nanoemulsions were analyzed through the evaluation of stability over time, pH, zeta potential, and particle size distribution analysis. Moreover, a design of experiments was performed to assess the most suitable composition based on particle size and stability parameters. The prepared nanoemulsions are, in general, highly stable over time, showing zeta potential values lower than −40 mV, a slight acid behavior due to the character of the components, and particle size (in volume) in the range of 1.1 to 4.3 µm. Response surface methodology revealed that formulations using an O/W ratio of 10/90 and 1.5 wt% surfactant resulted in lower particle sizes and zeta potential, presenting higher stability. The use of glycerol did not positively affect the formulations, which reinforces the suitability of preparing highly stable nanoemulsions based on natural surfactants such as saponins.

Tween 80 and Soya-Lecithin-Based Food-Grade Nanoemulsions for the Effective Delivery of Vitamin D

Fortification of food and beverages with vitamin D is demanding due to its poor water solubility and oxidation, due to exposure to light and high temperature. The purpose of this research work was to formulate an effective food-grade delivery system for the incorporation of vitamin D into food products and beverages. Food-grade vitamin D nanoemulsions were successfully prepared using mixed surfactant (Tween 80 and soya lecithin) and ultrasonic homogenization techniques. Significant effects (p < 0.05) of temperatures (4 and 25 °C) and storage intervals (1 month) were observed on the turbidity and vitamin D retention. At the end of a 2 month storage, the droplet sizes of the nanoemulsion were 140.15 nm at 4 °C and 155.5 nm at 25 °C. p-Anisidine value of canola oil significantly reduced (p < 0.05) after its incorporation into nanoemulsions. The turbidity values of nanoemulsions increased with the increase in storage duration and temperature. These nanoemulsions remain stable against a wide range of temperatures (30-90 °C), pH values (2-8), ionic strengths (50-400 mM), and freeze-thaw cycles (4 cycles). At the end of 30 days of storage, vitamin D retentions were 74.4 ± 1.2 and 55.3 ± 2.1% in nanoemulsions stored at 4 and 25 °C, respectively. These results suggest that mixed-surfactant-based nanoemulsions are an effective delivery system for the incorporation of vitamin D into food and beverages to overcome the worldwide deficiency of vitamin D.

Green approach in food nanotechnology based on subcritical water: effects of thyme oil and saponin on characteristics of the prepared oil in water nanoemulsions

Thyme oil in water nanomulsion was prepared under subcritical water conditions using water and saponin, as solvent and emulsifier, respectively. Gas chromatography revealed that there were 44 bioactive components in the extracted thyme essential oil which, thymol and carvacrol were two mains of them. Experiments were designed based on central composite design and effects of amounts of saponin and thyme essential oil were evaluated on particle size, polydispersity index (PDI) and zeta potential of the prepared nanoemulsions using response surface methodology. Obtained results revealed that more desirable thyme oil nanoemulsions with minimum particle size (184.51 nm) and PDI (0.514), and maximum zeta potential (- 22.51 mV) were prepared using 0.94 g of saponin and 0.28 mL of thyme essential oil. Furthermore, results indicated that prepared nanoemulsion using obtained optimum production conditions had relatively high antioxidant activity (24%) and high antibacterial and antifungal activities against Staphylococcus aureus and Penicillium digitatum.

An Overview of Micro- and Nanoemulsions as Vehicles for Essential Oils: Formulation, Preparation and Stability

The interest around essential oils is constantly increasing thanks to their biological properties exploitable in several fields, from pharmaceuticals to food and agriculture. However, their widespread use and marketing are still restricted due to their poor physico-chemical properties; i.e., high volatility, thermal decomposition, low water solubility, and stability issues. At the moment, the most suitable approach to overcome such limitations is based on the development of proper formulation strategies. One of the approaches suggested to achieve this goal is the so-called encapsulation process through the preparation of aqueous nano-dispersions. Among them, micro- and nanoemulsions are the most studied thanks to the ease of formulation, handling and to their manufacturing costs. In this direction, this review intends to offer an overview of the formulation, preparation and stability parameters of micro- and nanoemulsions. Specifically, recent literature has been examined in order to define the most common practices adopted (materials and fabrication methods), highlighting their suitability and effectiveness. Finally, relevant points related to formulations, such as optimization, characterization, stability and safety, not deeply studied or clarified yet, were discussed.

Nanoemulsions: Factory for Food, Pharmaceutical and Cosmetics

Nanotechnology, particularly nanoemulsions (NEs), have gained increasing interest from researchers throughout the years. The small-sized droplet with a high surface area makes NEs important in many industries. In this review article, the components, properties, formation, and applications are summarized. The advantages and disadvantages are also described in this article. The formation of the nanosized emulsion can be divided into two types: high and low energy methods. In high energy methods, high-pressure homogenization, microfluidization, and ultrasonic emulsification are described thoroughly. Spontaneous emulsification, phase inversion temperature (PIT), phase inversion composition (PIC), and the less known D-phase emulsification (DPE) methods are emphasized in low energy methods. The applications of NEs are described in three main areas which are food, cosmetics, and drug delivery.

Optimization of ultrasonication curcumin-hydroxylated lecithin nanoemulsions using response surface methodology

Ultrasonication technology was used to enhance the solubility and availability of lipophilic compounds as curcumin. This study aimed to know the optimal conditions to produce ultrasonication curcumin nanoemulsions stabilized with hydroxylated lecithin using response surface methodology and to evaluate some physical characteristics. Nanoemulsions were produced according to a Central Composite Face-center Design: surfactant oil ratio (SOR, 0.33-1.17), amplitude (A, 8-92%), and ultrasonication time (t, 2-18.4 min). Dynamic light scattering was used to measure the droplet size and polydispersity index of the nanoemulsions. Our results showed that a second-order polynomial function of amplitude and ultrasonication time model fitted well with the mean droplet size and polydispersity of the emulsions. Predicted droplet size was 122.2 nm and polydispersity index was 0.13 obtained at optimal conditions: SOR = 0.72, A = 92%, and t = 12 min. The nanoemulsions remained stable during 15 days of storage at 20 °C. Nanoemulsion remained stable to the aggregation in the pH range from 7.0 to 3.0, while the droplet size increased at lower pH values due to a loss of charge of the lecithin. Nanoemulsion applied in a sugar-beverage showed a yellow-green translucent color, showing better stability on the droplet size than the beverage with the coarse emulsion. Nanoemulsion could be used as a natural colorant in beverages.

Improving the Physical and Oxidative Stability of Emulsions Using Mixed Emulsifiers: Casein-Octenyl Succinic Anhydride Modified Starch Combinations

This study aims to investigate the influence of casein and octenyl succinic anhydride modified starch (OSAS) combinations on the physical and oxidative stability of fish oil-in-water emulsions. The interaction between casein and OSAS was manifested in changes in protein structure and hydrogen-bonding interaction. Casein-OSAS combinations could effectively inhibit droplet aggregation at pH 4 and attenuate droplet growth at a high CaCl2 concentration of 0.2 mol/L, compared with casein as an emulsifier. Nanoemulsions stabilized by casein-OSAS combinations or casein showed better oxidative stability compared with OSAS-stabilized emulsions. Therefore, casein-OSAS combinations can improve some physical properties of protein-based emulsions and oxidative stability of modified starch-based emulsions, suggesting protein-modified starch combinations are more promising in the emulsion-based food industry compared to each of the two emulsifiers alone.

Potential of Nanomaterial Applications in Dietary Supplements and Foods for Special Medical Purposes

Dietary supplements and foods for special medical purposes are special medical products classified according to the legal basis. They are regulated, for example, by the European Food Safety Authority and the U.S. Food and Drug Administration, as well as by various national regulations issued most frequently by the Ministry of Health and/or the Ministry of Agriculture of particular countries around the world. They constitute a concentrated source of vitamins, minerals, polyunsaturated fatty acids and antioxidants or other compounds with a nutritional or physiological effect contained in the food/feed, alone or in combination, intended for direct consumption in small measured amounts. As nanotechnology provides "a new dimension" accompanied with new or modified properties conferred to many current materials, it is widely used for the production of a new generation of drug formulations, and it is also used in the food industry and even in various types of nutritional supplements. These nanoformulations of supplements are being prepared especially with the purpose to improve bioavailability, protect active ingredients against degradation, or reduce side effects. This contribution comprehensively summarizes the current state of the research focused on nanoformulated human and veterinary dietary supplements, nutraceuticals, and functional foods for special medical purposes, their particular applications in various food products and drinks as well as the most important related guidelines, regulations and directives.

Vitamin E Encapsulation within Oil-in-Water Emulsions: Impact of Emulsifier Type on Physicochemical Stability and Bioaccessibility

The influence of plant-based (gum arabic and quillaja saponin) and animal-based (whey protein isolate, WPI) emulsifiers on the production and stability of vitamin E-fortified emulsions was investigated. Their impact on lipid digestibility and vitamin bioaccessibility was also studied utilizing an in vitro gastrointestinal tract. WPI and saponin produced smaller emulsions than gum arabic. All emulsions had good storage stability at room temperature (4 weeks, pH 7). Saponin- and gum arabic-emulsions were resistant to droplet aggregation from pH 2 to 8 because these emulsifiers generated strong electrosteric repulsion. WPI-coated droplets flocculated around pH 5 due to a reduction in charge near their isoelectric point. Lipid digestion was slower in saponin-emulsions, presumably because the high surface activity of saponins inhibited their removal by bile acids and lipase. Vitamin bioaccessibility was higher in WPI- than in saponin- or gum arabic-emulsions. This information may facilitate the design of more efficacious vitamin-fortified delivery systems.

Hydrophobized SN38 to redox-hypersensitive nanorods for cancer therapy

Redox-hypersensitive hydrophobized SN38 self-assembled into rod-shaped nanoaggregates with uncompromised in vitro cytotoxicity and potent in vivo antitumor effects.

A systematic review on nanoencapsulation of food bioactive ingredients and nutraceuticals by various nanocarriers

Today, there is an ever-growing interest on natural food ingredients both by consumers and producers in the food industry. In fact, people are looking for those products in the market which are free from artificial and synthetic additives and can promote their health. These food bioactive ingredients should be formulated in such a way that protects them against harsh process and environmental conditions and safely could be delivered to the target organs and cells. Nanoencapsulation is a perfect strategy for this situation and there have been many studies in recent years for nanoencapsulation of food components and nutraceuticals by different technologies. In this review paper, our main goal is firstly to have an overview of nanoencapsulation techniques applicable to food ingredients in a systematic classification, i.e., lipid-based nanocarriers, nature-inspired nanocarriers, special-equipment-based nanocarriers, biopolymer nanocarriers, and other miscellaneous nanocarriers. Then, application of these cutting-edge nanocarriers for different nutraceuticals including phenolic compounds and antioxidants, natural food colorants, antimicrobial agents and essential oils, vitamins, minerals, flavors, fish oils and essential fatty acids will be discussed along with presenting some examples in each field.

Vitamin E Encapsulation in Plant-Based Nanoemulsions Fabricated Using Dual-Channel Microfluidization: Formation, Stability, and Bioaccessibility

In this study, vitamin E was encapsulated in oil-in-water nanoemulsions fabricated using a dual-channel microfluidizer. A long chain triacylglycerol (corn oil) was used as a carrier oil and a biosurfactant (quillaja saponin) was used as a natural emulsifier. The impact of vitamin-to-carrier oil ratio on the formation, storage stability, and bioaccessibility of the nanoemulsions was determined. The lipid droplet size formed during homogenization increased with increasing vitamin content, which was attributed to a large increase in lipid phase viscosity. The storage stability of the nanoemulsions decreased as the vitamin content increased because the larger lipid droplets creamed faster. The rate and extent of lipid hydrolysis in the small intestine decreased as the vitamin content increased, probably because the vitamin molecules inhibited the ability of lipase to reach the triacylglycerols inside the lipid droplets. Vitamin bioaccessibility decreased as the vitamin level in the lipid phase increased, which was attributed to the reduced level of mixed micelles available to solubilize the tocopherols. The optimized nanoemulsion-based delivery system led to a relatively high vitamin bioaccessibility (53.9%). This research provides valuable information for optimizing delivery systems to increase the bioaccessibility of oil-soluble vitamins.

Optimization of mixed surfactants-based β-carotene nanoemulsions using response surface methodology: An ultrasonic homogenization approach

In the present study, food grade mixed surfactant-based β-carotene nanoemulsions were prepared without using any co-surfactant. Response surface methodology (RSM) along with central composite design (CCD) was used to investigate the effect of independent variables (surfactant concentration, ultrasonic homogenization time and oil content) on response variables. RSM analysis results revealed that experimental results were best fitted into a quadratic polynomial model with regression coefficient values of more than 0.900 for all responses. Optimized preparation conditions for β-carotene nanoemulsions were 5.82% surfactant concentration, 4 min ultrasonic homogenization time and 6.50% oil content. The experimental values at optimized preparation conditions were 119.33 nm droplet size, 2.67p-Anisidine value and 85.63% β-carotene retention. This study will be helpful for the fortification of aqueous products with β-carotene.

Thymol nanoemulsion exhibits potential antibacterial activity against bacterial pustule disease and growth promotory effect on soybean

An antibacterial and plant growth promoting nanoemulsion was formulated using thymol, an essential oil component of plant and Quillaja saponin, a glycoside surfactant of Quillaja tree. The emulsion was prepared by a sonication method. Fifty minutes of sonication delivered a long term stable thymol nanoemulsion which was characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), cryogenic-field emission scanning electron microscopy (Cryo-FESEM) and fourier transform infra-red (FTIR) spectroscopy. Creaming index, pH and dilution stability were also studied for deliberation of its practical applications. The nanoemulsion (0.01-0.06%, v/v) showed substantial in vitro growth inhibition of Xanthomonas axonopodis pv. glycine of soybean (6.7-0.0 log CFU/ml). In pot experiments, seed treatment and foliar application of the nanoemulsion (0.03-0.06%, v/v) significantly lowered the disease severity (DS) (33.3-3.3%) and increased percent efficacy of disease control (PEDC) (54.9-95.4%) of bacterial pustule in soybean caused by X. axonopodis pv. glycine. Subsequently, significant enhancements of plant growth were also recorded in plants treated with thymol nanoemulsion. This is the first report of a thymol based nanoemulsion obtained using Quillaja saponin as a surfactant. Our study claims that nano scale thymol could be a potential antimicrobial and plant growth promoting agent for agriculture.