A review on environmental monitoring of water organic pollutants identified by EU guidelines

Sustainable degradation of pollutants, generation of electricity and hydrogen evolution via photocatalytic fuel cells: An Inclusive Review

Environmental pollution and energy crisis have recently become one of the major global concerns. Insincere discharge of massive amount of organic and inorganic wastes into the aqueous bodies causes serious impact on our environment. However, these organic substances are significant sources of carbon and energy that could be sustainably utilized rather than being discarded. Photocatalytic fuel cell (PFC) is a smart and novel energy conversion device that has the ability to achieve dual benefits: degrading the organic contaminants and simultaneously generating electricity, thereby helping in environmental remediation. This article presents a detailed study of the recent advancements in the development of PFC systems and focuses on the fundamental working principles of PFCs. The degradation of various common organic and inorganic contaminants including dyes and antibiotics with simultaneous power generation and hydrogen evolution has been outlined. The impact of various operational factors on the PFC activity has also been briefly discussed. Moreover, it provides an overview of the design guidelines of the different PFC systems that has been developed recently. It also includes a mention of the materials employed for the construction of the photo electrodes and highlights the major limitations and relevant research scopes that are anticipated to be of interest in the days to come. The review is intended to serve as a handy resource for researchers and budding scientists opting to work in this area of PFC devices.

Sustainable removal of phenol from wastewater using a biopolymer hydrogel adsorbent comprising crosslinked chitosan and κ-carrageenan

A biopolymer-based adsorbent comprising chitosan (CS) and κ-carrageenan (κ-Carr) was synthesised and evaluated to treat phenolic-contaminated water. The developed CS/κ-Carr hydrogel demonstrated excellent performance with a phenol adsorption uptake of 80 %. The morphologies of CS/κ-Carr hydrogels with different ratios of CS to κ-Carr ranging from 1:2 to 7:3 were characterised using scanning electron microscopy and atomic force microscopy; their chemical structures were investigated by spectral analyses using Fourier-transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry; their adsorption characteristics were determined using tests for swelling, chemical stability, hygroscopic moisture content, and hydrophilicity. Finally, a batch-type evaluation method demonstrated adsorption performance at 25 °C and pH 6.9. Adsorption isotherms and kinetic data were successfully obtained using the Freundlich and pseudo-second-order models, respectively. The results indicate that one-pot synthesis of an insoluble CS/κ-Carr hydrogel adsorbent exhibits considerable potential for the removal of phenol from aqueous solutions, providing an environmentally friendly technology enhancing the phenol adsorption performance of CS.

Time-course adaption strategy of Tetraselmis-based consortia in response to 17α-ethinylestradiol

Estuarine ecosystem constitutes a microenvironment where the abundant green microalga Tetraselmis sp. co-exists with 17α-ethinylestradiol (EE2) pollution. However, the adaption mechanisms of this microalga-based consortia under EE2 shock are rarely recognized. Using extracellular polymeric substance (EPS) characterization, flow cytometry and transcriptomic, this study reveals the time-course response of Tetraselmis-based consortia under EE2 stress. Compared to the insignificant effect of 0.5 mg/L, a high dose of 2.5 mg/L EE2 induces persistent production of reactive oxygen species (ROS) and transiently physiological damages (membrane, chloroplast, organelle morphogenesis, and DNA replication), resulting in cell cycle alteration and division inhibition. These damages could be recovered through active DNA repair and persistently detoxifying processes of enhanced metabolism and ROS quenching. The enhanced EPS production is observed and in line with the significant up-regulation of most key enzymes involved in precursor synthesis and polysaccharides assembling. However, the up-regulation of glycoside hydrolases and most glycosyltransferases, down-regulation of flippases and changed expression of ABC family members indicate the changed EPS composition and synthesis strategy. The resulting increased colloidal polysaccharide is further consumed by associated bacteria whereas protein remains in the co-cultures. These results provide deeper insights into the adverse effects of chemical compounds to microalgae-bacteria and their coadaptation ability.

Approach to an answer to "How dangerous microplastics are to the human body": A systematic review of the quantification of MPs and simultaneously exposed chemicals

This review aims to facilitate future research on microplastics (MPs) in the environment using systematic and analytical protocols, ultimately contributing to assessment of the risk to human health due to continuous daily exposure to MPs. Despite extensive studies on MP abundance in environment, identification, and treatment, their negative effects on human health remain unknown due to the lack of proof from clinical studies and limited technology on the MP identification. To assess the risk of MPs to human health, the first step is to estimate MP intake via ingestion, inhalation, and dermal contact under standardized exposure conditions in daily life. Furthermore, rather than focusing on the sole MPs, migrating chemicals from plastic products should be quantified and their health risk be assessed concurrently with MP release. The critical factors influencing MP release and simultaneously exposed chemicals (SECs) must be investigated using a standardized identification method. This review summarises release sources, factors, and possible routes of MPs from the environment to the human body, and the quantification methods used in risk assessment. We also discussed the issues encountered in MP release and SEC migration. Consequently, this review provides directions for future MP studies that can answer questions about MP toxicity to human health.

Emerging aspects of metal ions-doped zinc oxide photocatalysts in degradation of organic dyes and pharmaceutical pollutants - A review

In recent periods, a broad assortment of continual organic contaminants has been released into our natural water resources. Indeed, it is exceedingly poisonous and perilous to living things; thus, the elimination of these organic pollutants before release into the water bodies is vital. A variety of techniques have been utilized to remove these organic pollutants with advanced oxidation photocatalytic methods with zinc oxide (ZnO) nanoparticles being commonly used as a capable catalyst for contaminated water treatment. Nevertheless, its broad energy gap, which can be only stimulated under an ultraviolet (UV) light source, and high recombination pairs of electrons and holes limit their photocatalytic behaviors. However, numerous methods have been suggested to decrease its energy gap for visible regions. Including, the doping ZnO with metal ions (dopant) can be considered as an effectual route not only the reason for a movement of the absorption edges toward the higher (visible light) region but also to lower the electron-hole pair (e--h+) recombination. This review concentrated on the impact of dissimilar types of metal ions (dopants) on the advancement in the degradation performance of ZnO. So, this work demonstrates a vital review of contemporary attainments in the alteration of ZnO nanoparticles for organic pollutants eliminations. Besides, the effect of doping ions including transition metals, rare earth metals, and metal ions (substitutional and interstitial) concerning numerous types of altered ZnO are summarized. The photodegradation mechanisms for pristine and metal-modified ZnO nanoparticles are also conferred.

Reswellable alginate/activated carbon/carboxymethyl cellulose hydrogel beads for ibuprofen adsorption from aqueous solutions

In this study, alginate (Alg) composite beads were prepared by blending with activated carbon (AC) to enhance adsorption capacity for ibuprofen and carboxymethyl cellulose (CMC) to create a reswellable hydrogel. The dried Alg/AC/CMC composite beads could be recovered to sizes and morphologies similar to the initial hydrogel states via a simple reswelling process; however, the dried Alg/AC composite beads without CMC could not be recovered to the initial hydrogel state. Following the reswelling process, the dried Alg/AC/CMC beads demonstrated an 86 % recovery (qe = 34.0 mg/g) in the adsorption capacity for ibuprofen compared to the initial hydrogel beads (qe = 39.6). In contrast, the reswelled Alg/AC beads exhibited only 18 % (qe = 8.6) of the initial adsorption capacity (qe = 48.1). We elucidated the effects of the substitution degree of CMC, AC content, and solution pH on the reswelling property and ibuprofen adsorption capacity of the Alg/AC/CMC composite beads. The adsorption kinetics and isotherms of the prepared composite beads in the hydrogel and reswelled states fit the pseudo-second-order and Langmuir models, respectively. Furthermore, the reswelled Alg composite beads exhibited high adsorption capacity (>93 %) after 10 cycles. Taken together, our findings indicate that the Alg/AC/CMC composite beads can be used as adsorbents without a considerable decrease in adsorption performance by reswelling the beads with distilled water after long-term storage in a dry state.

Spirulina (Arthrospira maxima) mitigates the toxicity induced by a mixture of metal and NSAID in Xenopus laevis

Cadmium (Cd) is often detected in the environment due to its wide use in industry; also, NSAIDs are one of the most consumed pharmaceuticals, particularly diclofenac (DCF). Several studies have reported the presence of both contaminants in water bodies at concentrations ranging from ng L-1 to μg L-1; in addition, they have shown that they can induce oxidative stress in aquatic species and disturb signal transduction, cell proliferation, and intercellular communication, which could lead to teratogenesis. Spirulina has been consumed as a dietary supplement; its antioxidant, anti-inflammatory, neuroprotective, and nutritional properties are well documented. This work aimed to evaluate if Spirulina reduces the damage induced by Cd and DCF mixture in Xenopus laevis at early life stages. FETAX assay was carried out: 20 fertilized oocytes were exposed to seven different treatments on triplicate, control, Cd (24.5 μg L-1), DCF (149 μg L-1), Cd + DCF, Cd+DCF+Spirulina (2 mg L-1), Cd+DCF+Spirulina (4 mg L-1), Cd+DCF+Spirulina (10 mg L-1), malformations, mortality, and growth were evaluated after 96 h, also lipid peroxidation, superoxide dismutase and catalase activity were determined after 192 h. Cd increased DCF mortality, Cd and DCF mixture increased the incidence of malformations as well as oxidative damage; on the other hand, the results obtained show that Spirulina can be used to reduce the damage caused by the mixture of Cd and DCF since it promotes growth, reduce mortality, malformations, and oxidative stress in X. laevis.

Graphene derivatives-based electrodes for the electrochemical determination of carbamate pesticides in food products: A review

Graphene (GR) composites have great potential for the determination of carbamates pesticides (CPs) by electrochemical methods. Since the beginning of the 20th century, GR has shown remarkable promise as electrode material for various sensors. The contamination of food products with harmful CPs is a major problem as they do not always damage human health immediately, but can be harmful after prolonged exposure. A range of advantages can be gained from their electrochemical determination, such as high sensitivity, reasonably selectivity, rapid detection, low limit of detection, and easy electrode fabrication. Furthermore, these electrochemical techniques are robust, reproducible, user-friendly, and conform to both "green" and "white" analytical chemistry. This review is focused on results published in the last ten years in the field of electrochemical determination of CPs in food products using GR and its derivatives.

Using Hepatic Gene Expression Assays in English Sole (Parophrys vetulus) to Investigate the Effects of Metro Vancouver Wastewater Effluents

The present study has investigated the effects of Metro Vancouver's wastewater treatment plant (WWTP) effluents on English sole (Parophrys vetulus) hepatic gene expression using novel targeted gene expression assays to complement the 2017 Burrard Inlet Ambient Monitoring Program conducted by Metro Vancouver. Seven locations of varying distance to the WWTPs were included. Twelve genes involved in xenobiotic defense (CYP1A, HSP70), thyroid function (DIO1), lipid and glucose metabolism (FABP1, FASN, GLUT2, PPARδ, PPARγ), protein synthesis (18S rRNA, RPS4X), and reproduction (ERα, VTG) revealed several differences between these impacted sites. A key finding of the present study was that males exhibited VTG transcript levels either equivalent or exceeding female levels of this gene at all sites investigated, indicating widespread exposure of estrogenic contaminants throughout Burrard Inlet. Furthermore, the induction of hepatic CYP1A was observed due to possible downstream sites being subjected to a larger influx of certain planar halogenated and non-halogenated hydrocarbons from multiple industrial contributors. This study also revealed significant differences between the sites examined and in genes involved in transcriptional regulation and synthesis of proteins, lipids and glucose metabolism, and thyroid hormone metabolism. Collectively, this study demonstrates the potential of molecular biomarkers of urban contaminant exposure in wild caught English sole for use in diagnosing a broader range of adverse health effects when combined with conventional whole organism health indicators.

Fate of emerging contaminants in a sequencing batch reactor and potential of biological activated carbon as tertiary treatment for the removal of persisting contaminants

The study aims to understand the occurrence and removal of 20 emerging contaminants (ECs) in each unit process of a sequencing batch reactor-based wastewater treatment plant (WWTP) and explore the potential of biological activated carbon (BAC) for the treatment of residual ECs and organic matter in the secondary effluent. Analgesic-acetaminophen, anti-inflammatory drug-ibuprofen, and stimulant-caffeine were detected at high concentrations in the influent. Most of the removal was observed in the biological treatment stage in the SBR basins. The mass load of the ECs was 2.93 g/d in the secondary effluent and 0.4 g/d in the final sludge, while the total removal of the mass load of ECs till the secondary treatment stage was 93.22%. 12 of the 20 ECs were removed by more than 50%, while carbamazepine (negative removal), sulfamethoxazole, and trimethoprim were removed by less than 20%. As a polishing step and to remove residual ECs, two BAC units were studied for 11,000 bed volumes (324 days). Packed column studies on granular activated carbon were conducted, and GAC development to BAC was monitored. SEM and FTIR were used to confirm and characterize the BAC. The BAC appeared to be more hydrophobic than the GAC. The BAC removed 78.4% and 40% of the dissolved ECs and organic carbon at an optimum EBCT of 25 min. Carbamazepine, sulfamethoxazole, and trimethoprim were removed by 61.5, 84, and 52.2%, respectively. Parallel column tests revealed adsorption as an important mechanism for the removal of positively charged compounds. The results indicate that the BAC is an effective tertiary/polishing technique for removing organic and micropollutants in the secondary wastewater effluent.

Microalgae systems - environmental agents for wastewater treatment and further potential biomass valorisation

Water is the most valuable resource on the planet. However, massive anthropogenic activities generate threatening levels of biological, organic, and inorganic pollutants that are not efficiently removed in conventional wastewater treatment systems. High levels of conventional pollutants (carbon, nitrogen, and phosphorus), emerging chemical contaminants such as antibiotics, and pathogens (namely antibiotic-resistant ones and related genes) jeopardize ecosystems and human health. Conventional wastewater treatment systems entail several environmental issues: (i) high energy consumption; (ii) high CO₂ emissions; and (iii) the use of chemicals or the generation of harmful by-products. Hence, the use of microalgal systems (entailing one or several microalgae species, and in consortium with bacteria) as environmental agents towards wastewater treatment has been seen as an environmentally friendly solution to remove conventional pollutants, antibiotics, coliforms and antibiotic resistance genes. In recent years, several authors have evaluated the use of microalgal systems for the treatment of different types of wastewater, such as agricultural, municipal, and industrial. Generally, microalgal systems can provide high removal efficiencies of: (i) conventional pollutants, up to 99%, 99%, and 90% of total nitrogen, total phosphorus, and/or organic carbon, respectively, through uptake mechanisms, and (ii) antibiotics frequently found in wastewaters, such as sulfamethoxazole, ciprofloxacin, trimethoprim and azithromycin at 86%, 65%, 42% and 93%, respectively, through the most desirable microalgal mechanism, biodegradation. Although pathogens removal by microalgal species is complex and very strain-specific, it is also possible to attain total coliform and Escherichia coli removal of 99.4% and 98.6%, respectively. However, microalgal systems' effectiveness strongly relies on biotic and abiotic conditions, thus the selection of operational conditions is critical. While the combination of selected species (microalgae and bacteria), ratios and inoculum concentration allow the efficient removal of conventional pollutants and generation of high amounts of biomass (that can be further converted into valuable products such as biofuels and biofertilisers), abiotic factors such as pH, hydraulic retention time, light intensity and CO₂/O₂ supply also have a crucial role in conventional pollutants and antibiotics removal, and wastewater disinfection. However, some rationale must be considered according to the purpose. While alkaline pH induces the hydrolysis of some antibiotics and the removal of faecal coliforms, it also decreases phosphates solubility and induces the formation of ammonium from ammonia. Also, while CO₂ supply increases the removal of E. coli and Pseudomonas aeruginosa, as well as the microalgal growth (and thus the conventional pollutants uptake), it decreases Enterococcus faecalis removal. Therefore, this review aims to provide a critical review of recent studies towards the application of microalgal systems for the efficient removal of conventional pollutants, antibiotics, and pathogens; discussing the feasibility, highlighting the advantages and challenges of the implementation of such process, and presenting current case-studies of different applications of microalgal systems.

Bifunctional catalytic degradation of diclofenac over Cu-Pd co-modified sponge iron-based trimetal: Parameter optimization

Currently, the pharmaceutical and personal care products (PPCPs) have posed great challenge to advanced oxidation techniques (AOTs). In this study, we decorated sponge iron (s-Fe⁰) with Cu and Pd (s-Fe⁰-Cu-Pd) and further optimized the synthesis parameters with a response surface method (RSM) to rapidly degrade diclofenac sodium (DCF). Under the RSM-optimized conditions of Fe: Cu: Pd = 100: 4.23: 0.10, initial solution pH of 5.13, and input dosage of 38.8 g/L, 99% removal of DCF could be obtained after 60 min of reaction. Moreover, the morphological structure of trimetal was characterized with high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS). Electron spin resonance (ESR) signals have also been applied to capture reactive hydrogen atoms (H*), superoxygen anions, hydroxyl radicals, and single state oxygen (¹O₂). Furthermore, the variations of DCF and its selective degradation products over a series of s-Fe⁰-based bi(tri)metals have been compared. Additionally, the degradation mechanism of DCF has also been explored. To our best knowledge, this is the first report revealing the selective dechlorination of DCF with low toxicity over Pd-Cu co-doped s-Fe⁰ trimetal.

Green Synthesis of Hydrogel-Based Adsorbent Material for the Effective Removal of Diclofenac Sodium from Wastewater

The removal of pharmaceutical contaminants from wastewater has gained considerable attention in recent years, particularly in the advancements of hydrogel-based adsorbents as a green solution for their ease of use, ease of modification, biodegradability, non-toxicity, environmental friendliness, and cost-effectiveness. This study focuses on the design of an efficient adsorbent hydrogel based on 1% chitosan, 40% polyethylene glycol 4000 (PEG4000), and 4% xanthan gum (referred to as CPX) for the removal of diclofenac sodium (DCF) from water. The interaction between positively charged chitosan and negatively charged xanthan gum and PEG4000 leads to strengthening of the hydrogel structure. The obtained CPX hydrogel, prepared by a green, simple, easy, low-cost, and ecological method, has a higher viscosity due to the three-dimensional polymer network and mechanical stability. The physical, chemical, rheological, and pharmacotechnical parameters of the synthesized hydrogel were determined. Swelling analysis demonstrated that the new synthetized hydrogel is not pH-dependent. The obtained adsorbent hydrogel reached the adsorption capacity (172.41 mg/g) at the highest adsorbent amount (200 mg) after 350 min. In addition, the adsorption kinetics were calculated using a pseudo first-order model and Langmuir and Freundlich isotherm parameters. The results demonstrate that CPX hydrogel can be used as an efficient option to remove DCF as a pharmaceutical contaminant from wastewater.

Nanotechnology as an efficient and effective alternative for wastewater treatment: an overview

The increase in the surface and groundwater contamination due to global population growth, industrialization, proliferation of pathogens, emerging pollutants, heavy metals, and scarcity of drinking water represents a critical problem. Because of this problem, particular emphasis will be placed on wastewater recycling. Conventional wastewater treatment methods may be limited due to high investment costs or, in some cases, poor treatment efficiency. To address these issues, it is necessary to continuously evaluate novel technologies that complement and improve these traditional wastewater treatment processes. In this regard, technologies based on nanomaterials are also being studied. These technologies improve wastewater management and constitute one of the main focuses of nanotechnology. The following review describes wastewater's primary biological, organic, and inorganic contaminants. Subsequently, it focuses on the potential of different nanomaterials (metal oxides, carbon-based nanomaterials, cellulose-based nanomaterials), membrane, and nanobioremediation processes for wastewater treatment. The above is evident from the review of various publications. However, nanomaterials' cost, toxicity, and biodegradability need to be addressed before their commercial distribution and scale-up. The development of nanomaterials and nanoproducts must be sustainable and safe throughout the nanoproduct life cycle to meet the requirements of the circular economy.

Novel nontarget LC-HRMS-based approaches for evaluation of drinking water treatment

A conventional evaluation methodology for drinking water pollution focuses on analysing hundreds of compounds, usually by liquid chromatography-tandem mass spectrometry. High-resolution mass spectrometry allows comprehensive evaluation of all detected signals (compounds) based on their elemental composition, intensity, and numbers. We combined target analysis of 192 emerging micropollutants with nontarget (NT) full-scan/MS/MS methods to describe the impact of treatment steps in detail and assess drinking water treatment efficiency without compound identification. The removal efficiency based on target analytes ranged from - 143 to 97%, depending on the treatment section, technologies, and season. The same effect calculated for all signals detected in raw water by the NT method ranged between 19 and 65%. Ozonation increased the removal of micropollutants from the raw water but simultaneously caused the formation of new compounds. Moreover, ozonation byproducts showed higher persistence than products formed during other types of treatment. We evaluated chlorinated and brominated organics detected by specific isotopic patterns within the developed workflow. These compounds indicated anthropogenic raw water pollution but also potential treatment byproducts. We could match some of these compounds with libraries available in the software. We can conclude that passive sampling combined with nontargeted analysis shows to be a promising approach for water treatment control, especially for long-term monitoring of changes in technology lines because passive sampling dramatically reduces the number of samples and provides time-weighted average information for 2 to 4 weeks.

Bacillus cereus WL08 immobilized on tobacco stem charcoal eliminates butylated hydroxytoluene in soils and alleviates the continuous cropping obstacle of Pinellia ternata

Butylated hydroxytoluene (BHT), as an emerging contaminant in ecosystems, has potential influences on animals, aquatic organisms, and public health, and has been proven to be a major allelochemical of Pinellia ternata. In this study, Bacillus cereus WL08 was used to rapidly degrade BHT in liquid culture. Strain WL08 immobilized on tobacco stem charcoal (TSC) particles notably accelerated BHT removal in contract to its free cells, and exhibited excellent reutilization and storage capacities. The optimal removal parameters of TSC WL08 were ascertained to be pH 7.0, 30 °C, 50 mg L^-1 BHT and 0.14 mg L^-1 TSC WL08. Moreover, TSC WL08 significantly accelerated the degradation of 50 mg L^-1 BHT in sterile and non-sterile soils compared to that of free WL08 or natural dissipation, and notably shortened their half-lives by 2.47- or 362.14- fold, and 2.20- or 14.99- fold, respectively. Simultaneously, TSC WL08 was introduced into the continuous cropping soils of P. ternata, which accelerated the elimination of allelochemical BHT, and notably enhanced the photosynthesis, growth, yield, and quality of P. ternata. This study provides new insights and strategies for the rapid in situ remediation of BHT-polluted soils and effective alleviation of P. ternata cropping obstacles.

Detection of Acetaminophen in Groundwater by Laccase-Based Amperometric Biosensors Using MoS2 Modified Carbon Paper Electrodes

The use of enzyme-based biosensors for the detection and quantification of analytes of interest such as contaminants of emerging concern, including over-the-counter medication, provides an attractive alternative compared to more established techniques. However, their direct application to real environmental matrices is still under investigation due to the various drawbacks in their implementation. Here, we report the development of bioelectrodes using laccase enzymes immobilized onto carbon paper electrodes modified with nanostructured molybdenum disulfide (MoS2). The laccase enzymes were two isoforms (LacI and LacII) produced and purified from the fungus Pycnoporus sanguineus CS43 that is native to Mexico. A commercial purified enzyme from the fungus Trametes versicolor (TvL) was also evaluated to compare their performance. The developed bioelectrodes were used in the biosensing of acetaminophen, a drug widely used to relieve fever and pain, and of which there is recent concern about its effect on the environment after its final disposal. The use of MoS2 as a transducer modifier was evaluated, and it was found that the best detection was achieved using a concentration of 1 mg/mL. Moreover, it was found that the laccase with the best biosensing efficiency was LacII, which achieved an LOD of 0.2 µM and a sensitivity of 0.108 µA/µM cm2 in the buffer matrix. Moreover, the performance of the bioelectrodes in a composite groundwater sample from Northeast Mexico was analyzed, achieving an LOD of 0.5 µM and a sensitivity of 0.015 µA/µM cm2. The LOD values found are among the lowest reported for biosensors based on the use of oxidoreductase enzymes, while the sensitivity is the highest currently reported.

Nontarget Analysis of Polluted Surface Waters in Bangladesh Using Open Science Workflows

Nontarget mass spectrometry has great potential to reveal patterns of water contamination globally through community science, but few studies are conducted in low-income countries, nor with open-source workflows, and few datasets are FAIR (Findable, Accessible, Interoperable, Reusable). Water was collected from urban and rural rivers around Dhaka, Bangladesh, and analyzed by liquid chromatography high-resolution mass spectrometry in four ionization modes (electrospray ionization ±, atmospheric pressure chemical ionization ±) with data-independent MS2 acquisition. The acquisition strategy was complementary: 19,427 and 7365 features were unique to ESI and APCI, respectively. The complexity of water pollution was revealed by >26,000 unique molecular features resolved by MS-DIAL, among which >20,000 correlated with urban sources in Dhaka. A major wastewater treatment plant was not a dominant pollution source, consistent with major contributions from uncontrolled urban drainage, a result that encourages development of further wastewater infrastructures. Matching of deconvoluted MS2 spectra to public libraries resulted in 62 confident annotations (i.e., Level 1-2a) and allowed semiquantification of 42 analytes including pharmaceuticals, pesticides, and personal care products. In silico structure prediction for the top 100 unknown molecular features associated with an urban source allowed 15 additional chemicals of anthropogenic origin to be annotated (i.e., Level 3). The authentic MS2 spectra were uploaded to MassBank Europe, mass spectral data were openly shared on the MassIVE repository, a tool (i.e., MASST) that could be used for community science environmental surveillance was demonstrated, and current limitations were discussed.

Validation of an isotope dilution mass spectrometry (IDMS) measurement procedure for the reliable quantification of steroid hormones in waters

Reliable data are compulsory to efficiently monitor pollutants in aquatic environments, particularly steroid hormones that can exert harmful effects at challenging analytical levels below the ng L^-1. An isotope dilution two-step solid-phase extraction followed by an ultra-performance liquid chromatography separation coupled to tandem mass spectrometry (UPLC-MS/MS) detection method was validated for the quantification of 21 steroid hormones (androgens, estrogens, glucocorticoids, and progestogens) in whole waters. To achieve a realistic and robust assessment of the performances of this method, the validation procedure was conducted using several water samples representative of its intended application. These samples were characterized in terms of concentration of ionic constituents, suspended particulate matter (SPM), and dissolved organic carbon contents (DOC). For estrogens that are part of the European Water Framework Directive Watchlist (17beta-estradiol and estrone), the performances met the European requirements (decision 2015/495/EU) in terms of limit of quantification (LQ) and measurement uncertainty. For 17alpha-ethinylestradiol, the challenging LQ of 0.035 ng L^-1 was reached. More generally, for 15 compounds out of 21, the accuracy, evaluated in intermediate precision conditions at concentrations ranging between 0.1 and 10 ng L^-1, was found to be within a 35% tolerance. The evaluation of the measurement uncertainty was realized following the Guide to the expression of Uncertainty in Measurement. Finally, a water monitoring survey demonstrated the suitability of the method and pointed out the contamination of Belgium rivers by five estrogens (17alpha-ethinylestradiol, estriol, 17alpha-estradiol, 17beta-estradiol, and estrone) and three glucocorticoids (betamethasone, cortisol, and cortisone) which have been up to now poorly documented in European rivers.

Water pollution threats in important bird and biodiversity areas from Spain

Chemical pollution is still an underestimated threat to surface waters from natural areas. This study has analysed the presence and distribution of 59 organic micropollutants (OMPs) including pharmaceuticals, lifestyle compounds, pesticides, organophosphate esters (OPEs), benzophenone and perfluoroalkyl substances (PFASs) in 411 water samples from 140 Important Bird and Biodiversity Areas (IBAs) from Spain, to evaluate the impact of these pollutants in sites of environmental relevance. Lifestyle compounds, pharmaceuticals and OPEs were the most ubiquitous chemical families, while pesticides and PFASs showed a detection frequency below 25% of the samples. The mean concentrations detected ranged from 0.1 to 301 ng/L. According to spatial data, agricultural surface has been identified as the most important source of all OMPs in natural areas. Lifestyle compounds and PFASs have been related to the presence of artificial surface and wastewater treatment plants (WWTPs) discharges, which were also an important source of pharmaceuticals to surface waters. Fifteen out of 59 OMPs have been found at levels posing a high risk for the aquatic IBAs ecosystems, being the insecticide chlorpyrifos, the antidepressant venlafaxine and perfluorooctanesulfonic acid (PFOS) the most concerning compounds. This is the first study to quantify water pollution in IBAs and evidence that OMPs are an emerging threat to freshwater ecosystems that are essential for biodiversity conservation.

Biotic transformation products of sulfonamides in environmental water samples: High-resolution mass spectrometry-based tentative identification by a suspect screening approach

The presence of pharmaceuticals in the aquatic environment is mainly due to their release from the effluents of the wastewater treatment plants (WWTPs), which are unable to completely remove them and their transformation products (TPs). Sulfonamides (SAs) are a synthetic antibacterial class used for the treatment of both human and animal infections; they have often been reported in surface water, thus contributing to the antibiotic resistance emergency. Monitoring SA TPs should be important as well because they could still exert some pharmaceutical activity; however, many TPs are still unknown since several transformation processes are possible (e. g. human and animal metabolism, WWTP activities, environmental factors etc.). In this work, three of the most used SAs, i.e., sulfamethoxazole (SMX), sulfapyridine (SPY), and sulfadiazine (SDZ), were incubated for 20 days in a batch reactor with activated sludge under controlled conditions. Then, the water sample was extracted and analyzed by ultra-high performance liquid chromatography-high resolution mass spectrometry in the data dependent acquisition (DDA) mode. Starting from the literature data, the possible transformation pathways were studied, and for each SA, a list of TPs was hypothesized and used for the identification. The raw data files were processed with Compound Discoverer, and 44 TPs (18, 13, and 13 TPs for SMX, SPY, and SDZ, respectively), including multiple TPs, were manually validated. To overcome the limitation of the DDA, the identified TPs were used in an inclusion list to analyze WWTP samples by a suspect screening approach. In this way, 4 SMX TPs and 5 SPY TPs were tentatively identified together with their parent compounds. Among these TPs, 5 of 9 were acetylated forms, in agreement with previous literature reporting that acetylation is the predominant SA transformation.

Ribbon-shaped supramolecular solvents: Synthesis, characterization and potential for making greener the microextraction of water organic pollutants

Liquid-liquid microextraction (LLME) techniques have experienced a tremendous growth over the last years but still face major challenges related to the use of more efficient and environmentally friendly solvents. Supramolecular solvents (SUPRASs) have proved outstanding efficiency in LLME, but many of the experimental conditions required for SUPRAS formation and/or application cannot be considered green or experimentally convenient. This paper was intended to make greener both SUPRAS formation and their application to the LLME of low-concentration organic pollutants in environmental waters. For this purpose, a variety of SUPRASs were produced at room temperature by simply mixing alkyl phosphonates (A_6-12PO₃H^- and A_6-12PO₃^-2) and tetrahexylammonium (He₄N⁺) ions in aqueous media. Among them, the SUPRASs produced from decyl hydrogen phosphonate (DePO₃H^-) and He₄N⁺ allowed, for the first time, the development of SUPRAS-based LLMEs where the SUPRAS previously synthesized was added to the liquid sample, instead of being formed in situ as usual, which was proved particularly advantageous for analyses involving large sample/SUPRAS volume ratios. At near equimolar amounts of DePO₃H^- and He₄N⁺, the amphiphile arranged in the SUPRAS as planar ribbons consisting of water (21 ± 3%, w/v) and DePO₃H^- and He₄N⁺ in the concentration range 1.0-1.4 M. The application of these SUPRASs to LLMEs was proved by extracting carcinogenic polycyclic aromatic hydrocarbons (CPAHs) from drinking (tap and bottled) and natural (river, reservoir and underground) water (recoveries between 84 and 117% with standard deviations varying between 1 and 14%). The developed method was simple (it only required the addition of 500 μL of SUPRAS to 75 mL of sample, stirring and centrifugation), sensitive (method quantitation limits were below the maximum allowed limits set by the EU; were 0.6-7.1 ng L^-1) and selective (SUPRAS extracts were directly analyzed by liquid chromatography-fluorimetry). This research proves that SUPRASs can be operationally used in LLMEs similarly to conventional solvents, which should favor their routine application in high-sample throughput laboratories.

β-Cyclodextrin functionalized adsorbents for removal of organic micropollutants from water

The presence of organic micropollutants in water is an ongoing concern due to the potential risks to living organisms. β-Cyclodextrin-based adsorbents have been developed to remove organic micropollutants from water as they are deemed to be efficient, selective and reusable. This literature review establishes the current state of the knowledge on the application of β-Cyclodextrin adsorbents for the removal of organic micropollutants from water and determines knowledge gaps and recommendations for future studies. An inventory of organic micropollutants that have been studied was developed and it revealed that bisphenol-A has been the most commonly studied. Adsorbent configurations were reviewed and modifications to the adsorbent structures that have provided enhanced adsorption properties were identified. The size and shape of the organic micropollutants was found to affect the adsorption behavior. The surface charge of β-Cyclodextrin adsorbents influence adsorption when repulsive forces are present and the extent of repulsion can depend on the pH of the solution. Common competitors such as natural organic matter and inorganic ions do not significantly impact the adsorption of organic micropollutants however relatively small fulvic acids may compete for the β-Cyclodextrin cavity depending on the adsorbent type. Desorption of organic micropollutants from these adsorbents has been accomplished with alcohols and most adsorbents have been recovered and reused in adsorption/desorption cycles. The need for enhanced recovery processes that maintain water quality and adsorbent integrity was identified. The use of quantitative structure-activity relationships and molecular computational tools could potentially guide future environmental applications of β-Cyclodextrin adsorbents.

Wastewater surveillance of 105 pharmaceutical drugs and metabolites by means of ultra-high-performance liquid-chromatography-tandem high resolution mass spectrometry

Water pollution from pharmaceutical drugs is becoming an environmental issue of increasing concern, making water quality monitoring a crucial priority to safeguard public health. In particular, the presence of antidepressants, benzodiazepines, antiepileptics, and antipsychotics require specific attention as they are known to be harmful to aquatic biota. In this study, a multi-class comprehensive method for the detection of 105 pharmaceutical residues in small (30 mL) water samples was developed according to fit-for-purpose criteria and then applied to provide wide screening of samples obtained from four Wastewater Treatment Plants (WWTPs) in northern Italy. The filtered samples (0.22 µm filters) were extracted by SPE, and then eluted. 5 µL of the concentrated samples were analyzed by a UHPLC-QTOF-HRMS method validated for screening purposes. Adequate sensitivity was recorded for all target analytes, with limits of detection below 5 ng/L for 76 out of 105 analytes. A total of 23 out of the 105 targeted pharmaceutical drugs was detected in all samples. Several further compounds were detected over wide concentration intervals, ranging from ng/L to µg/L. In addition, the retrospective analysis of full-scan QTOF-HRMS data was exploited to carry out an untargeted screening of some drugs' metabolites. As a proof of concept, it was investigated the presence of the carbamazepine metabolites, which is among the most frequently detected contaminants of emerging concern in wastewater. Thanks to this approach, 10,11-dihydro-10-hydroxycarbamazepine, 10,11-dihydro-10,11-dihydroxycarbamazepine and carbamazepine-10,11-epoxide were identified, the latter requiring particular attention, since it exhibits antiepileptic properties similar to carbamazepine and potential neurotoxic effects in living organism.

Biochar-derived dissolved black carbon accelerates ferrihydrite microbial transformation and subsequent imidacloprid degradation

The effects of an electron shuttle (dissolved black carbon (DBC) derived from biochar) on the microbial reduction of ferrihydrite and subsequent imidacloprid (IMI) degradation were studied. The results showed that DBC addition enhanced the microbial reduction of Fe(III) in ferrihydrite and increased the quantity of Fe(II) released into the liquid phase. The electron transfer capacity of DBC was significantly influenced by the content of redox-active oxygen-containing functional groups (e.g., quinone, hydroquinone, and polyphenol groups), which was dependent on the pyrolysis temperature. The electrochemical characteristics of DBC resulted in enhanced electron transfer, which promoted Fe(III) reduction and mediated the microbial transformation of ferrihydrite. The microbial transformation of ferrihydrite resulted in the formation of secondary minerals such as siderite and vivianite. The IMI degradation efficiency was related to the Fe(III) reduction rate and the pyrolysis temperature used in DBC production, and the degradation pathways were nitrate reduction and imino hydrolysis induced by the Fe(II) generated from the reduction of Fe(III) in ferrihydrite. The results obtained in this study provide new data for understanding the multifunctional roles of biochar-derived DBC in the redox and transformation processes of iron minerals induced by iron-reducing bacteria, the related biogeochemical cycles of iron and the fate of pollutants.

Porous Materials for Water Purification

Water pollution is a growing threat to humanity due to the pervasiveness of contaminants in water bodies. Significant efforts have been made to separate these hazardous components to purify polluted water through various methods. However, conventional remediation methods suffer from limitations such as low uptake capacity or selectivity, and current water quality standards cannot be met. Recently, advanced porous materials (APMs) have shown promise in improved segregation of contaminants compared to traditional porous materials in uptake capacity and selectivity. These materials feature merits of high surface area and versatile functionality, rendering them ideal platforms for the design of novel adsorbents. This Review summarizes the development and employment of APMs in a variety of water treatments accompanied by assessments of task-specific adsorption performance. Finally, we discuss our perspectives on future opportunities for APMs in water purification.

A critical review on the interaction of polymer particles and co-existing contaminants: Adsorption mechanism, exposure factors, effects on plankton species

This review considers the interaction of microplastics (MPs)/nanoplastics (NPs) and co-existing contaminants, including organic contaminants, potentially toxic elements (PTEs), and metal/metal-oxide nanoparticles. Stronger adsorption between plastic particles and co-existing contaminants can either facilitate or prevent more contaminants to enter plankton. The characteristics of MPs/NPs, such as polymer type, size, functional groups, and weathering, affect combined effects. Mixture toxicity is affected by those factors simultaneously and also affected by the type of co-existing contaminants, their concentrations, exposure time, dissolved organic matter, and surfactant. For co-exposure involving organics and metal nanoparticles, marine Skeletonema costatum generally had antagonistic effects, while marine Chlorella pyrenoidosa, Platymonas subcordiformis, and Tetraselmis chuii, showed synergistic effects. For co-exposure involving organics and PTEs, both Chlorella sp. and Microcystis aeruginosa generally demonstrated antagonistic effects. Freshwater Chlorella reinhardtii and Scenedesmus obliquus had synergistic effects for co-exposure involving metal/metal oxide nanoparticles. Zooplankton shows more unpredicted sensitivity towards the complex system. Different co-existing contaminants have different metabolism pathways. Organic contaminants could be biodegraded, which may enhance or alleviate mixture toxicity. PTEs could be adsorbed and desorbed under changing environments, and further affect the combined effects. The presence of metal/metal-oxide nanoparticles is more complicated, since some may release ion metals, increasing contaminant composition.

Insights into sorption and molecular transport of atrazine, testosterone, and progesterone onto polyamide microplastics in different aquatic matrices

Microplastics can act as vectors of a wide class of contaminants in aquatic environments. The sorption behavior of two hormones known to cause adverse effects in biota even in low concentrations (testosterone-TTR and progesterone-PGT), and a pesticide with a high environmental persistence known as endocrine disruptor chemical (atrazine-ATZ) onto polyamide (PA) microplastics is investigated under different aquatic matrices using kinetic and isotherm experiments. The sorption equilibrium is achieved in 48 h, and the experimental results are better fitted by pseudo-2nd-order model. Langmuir isotherm better describes the sorption of the contaminants onto PA microplastics. PGT presents the highest sorption efficiency at around 90%, followed by TTR at 70% and ATZ at approximately 20%. Moreover, ATZ is the contaminant with the highest desorption efficiency (∼65%), indicating its preference for staying solubilized in water. Combining classical molecular dynamics and density functional theory calculations, the sorption energies were calculated as 12-15 kcal mol^-1, 13-16 kcal mol^-1, and 19-22 kcal mol^-1 for PGT, TTR, and ATZ, respectively, showing that PGT needs less energy to be transferred from the solvent network to the PA surface, in agreement with experimental results. The sorption mechanism is driven by hydrogen bonds onto PA outer surface, while the electrostatic interactions dominate the PA inner surface sorption. Moreover, the sorption efficiency is statistically different between the investigated matrices, indicating that physicochemical characteristics of water systems could influence the interactions between PA-contaminant. In seawater, the phenomena of salting-out/in and competitive sorption with saline ions are observed for three contaminants. The PA-contaminant complexes are more polar and soluble than the dissociated ones, which increases the contaminant's co-transport by PA in water.

Efficiency of Diclofenac Removal Using Activated Sludge in a Dynamic System (SBR Reactor) with Variable Parameters of pH, Concentration, and Sludge Oxygenation

Recently, traditional wastewater treatment systems have not been adapted to remove micropollutants, including pharmaceutical substances, which, even at low concentrations, cause adverse changes in aquatic and terrestrial living organisms. The problem of drug residues in the environment has been noticed; however, no universal legal regulations have been established for concentrations of these compounds in treated wastewater. Hence, the aim of the article was to determine the possibility of increasing the efficiency of diclofenac removal from activated sludge using the designed SBR reactor. This study included six cycles, working continuously, where each of them was characterized by changing conditions of pH, oxygenation, and composition of the synthetic medium. In each cycle, three concentrations of diclofenac were analyzed: 1 mg/L, 5 mg/L, 10 mg/L for the hydraulic retention time (HRT) of 4 d and the sludge retention time (SRT) of 12 d. The highest removal efficiency was achieved in the first test cycle for pH of natural sediment at the level of 6.7-7.0 (>97%), and in the third test cycle at pH stabilized at 6.5 (>87%). The reduced content of easily assimilable carbon from synthetic medium indicated a removal of >50%, which suggests that carbon in the structure of diclofenac restrained microorganisms to the rapid assimilation of this element. Under half-aerobic conditions, the drug removal effect for a concentration of 10 mg/L was slightly above 60%.

A comprehensive study of the source, occurrence, and spatio-seasonal dynamics of 12 target antibiotics and their potential risks in a cold semi-arid catchment

Antibiotics are widely consumed and are ubiquitous in aquatic ecosystems, such as in agricultural and fishery lake catchments, for prophylactic treatment. However, there are very few comprehensive studies reporting all seasonal occurrences, spatiotemporal dynamics, and risk assessments of antibiotics in agricultural lake catchments, especially in cold regions during the winter season. This study measured seasonality in the concentrations of 12 antibiotics belonging to seven different classes in the surface waters (tributary rivers and lakes) of the Chagan lake catchment in northeast China. All antibiotics were detected in most of the water samples across most seasons, with concentrations varying for different compounds, locations, and seasons. These levels were discussed in terms of the main sources at different sampling sites, including agriculture, fish farming, municipal wastewater, and others. In general, the highest concentrations of most compounds were observed during the freeze-thaw periods. The number of antibiotic resistance genes (ARGs) correlated with compound lipophilicity and half-life. Based on the ecological risks of antibiotics and the relative abundance of ARGs, a hierarchical control priority list (HCPL) of antibiotics was determined, considering four levels (critical, high, medium, and low). To further strengthen the control and effectively manage antibiotics, we highly recommend the reduction and selective use of veterinary antibiotics in winter and spring during the freeze-thaw periods in the Chagan lake catchment.

Occurrence and distribution of contaminants of legacy and emerging concern in surface waters of two Western Mediterranean coastal areas: Mar Menor Lagoon and Ebro Delta

The occurrence and distribution of UV filters, plastic additives, synthetic musks, other personal care products (Other PCPs), triazines, polycyclic aromatic hydrocarbons (PAHs), organochlorine pesticides (OCPs), organophosphorus pesticides (OPPs), polychlorinated biphenyls (PCBs) and other current-use pesticides (Other CUPs) were characterised during summer 2018 and winter 2019 in surface waters of two sensitive areas of the Spanish coast located on the Mediterranean Sea (Mar Menor lagoon and Ebro Delta). Sixty-three organic contaminants out of a total of 100 compounds were detected, thus confirming the presence of all groups of pollutants studied in surface water at concentrations of ng/L. Both areas are affected by agricultural, urban and recreational activities, PCPs (mainly UV filters) being the predominant compounds found in both seasons which showed significant increases in concentrations in summer. The contaminants found at the highest concentrations were octocrylene, homosalate and ethylhexyl salicylate, which showed risk quotients higher than 1, indicating a potential risk to aquatic organisms, particularly in summer.

Potential of Biochar from Wood Gasification to Retain Endocrine Disrupting Chemicals

In this study, a biochar obtained from poplar wood gasification at a temperature of 850 °C was used to adsorb the xenoestrogens 4-tert-octylphenol (OP) and bisphenol A (BPA) and the herbicide metribuzin from water. Scanning electron microscopy (SEM-EDX) and Fourier-transform infrared (FTIR) spectroscopy were employed to investigate the surface micromorphology and functional groups composition of biochar, respectively. The study of sorption kinetics showed that all compounds achieved the steady state in less than 2 h, according to a pseudo-second order model, which denoted the formation of strong bonds (chemisorption) between biochar and the compounds. Adsorption isotherms data were described by the Henry, Freundlich, Langmuir and Temkin equations. At temperatures of 10 and 30 °C, the equilibrium data of the compounds were generally better described by the Freundlich model, although, in some cases, high correlation coefficients (r ≥ 0.98) were obtained for more than one model. Freundlich constants, K_F, for OP, BPA and metribuzin were, respectively, 218, 138 and 4 L g^-1 at 10 °C and 295, 243 and 225 L g^-1 at 30 °C, indicating a general increase of adsorption at higher temperature. Desorption of all compounds, especially OP and BPA, from biochar was slow and very scarce, denoting an irreversible and hysteretic process. Comparing the results of this study with those reported in the literature, we can conclude that the present biochar has a surprising ability to retain organic compounds almost permanently, thus behaving as an excellent low-cost biosorbent.

Distribution, sources and ecological risk assessment of polycyclic aromatic hydrocarbons in waters and sediments from Olt River dam reservoirs in Romania

This study provides important data on the distribution, sources and ecological risks of polycyclic aromatic hydrocarbons (PAHs), in surface waters and sediments collected from dam reservoirs on middle and lower course of the Olt River, the main tributary of the Danube, until the discharge into the Black Sea. A wide variation range of total PAHs concentrations in water (from 1.3 to 46.2 ng/L) and sediment (from 1.78 to 614.04 μg/kg) samples was emphasized by the results. The highest average PAHs concentration in water was recorded in the cold season and the lowest in the summer. In sediments, no differences were observed depending on the sampling period. Spatial distribution of PAHs in waters and sediments was correlated with the main anthropogenic activities along the river course. Regardless of the method used to attribute PAH sources (diagnostic ratios of specific PAHs, principal component analysis and hierarchical cluster analysis), it was confirmed that the potential anthropogenic sources of PAHs were both pyrogenic (incomplete combustion of biomass and coal) and pyrolytic (incomplete combustion of liquid fossil fuels and vehicle exhaust emissions), with a dominant pyrolytic input. Ecological risk assessment based on environmental quality standards, mean effect range-median quotient (m-ERM-Q), toxic equivalency factors (TEFs) and risk quotient (RQ) methods indicated potentially low ecological risks from PAHs. The ecological status of the Olt river waters poses no potential risk, and pollution of surface sediments can be classified as low polluted, except for two sites near industrial activities classified as moderately polluted. Therefore, a regular monitoring of PAHs concentration in the waters and sediments should be performed to prevent further contamination of PAHs in the studied area, especially in densely populated industrial areas.

Pesticides monitoring in surface water of a subsistence agricultural catchment in Uganda using passive samplers

Pesticides are intensely used in the agricultural sector worldwide including smallholder farming. Poor pesticide use practices in this agronomic setting are well documented and may impair the quality of water resources. However, empirical data on pesticide occurrence in water bodies of tropical smallholder agriculture is scarce. Many available data are focusing on apolar organochlorine compounds which are globally banned. We address this gap by studying the occurrence of a broad range of more modern pesticides in an agricultural watershed in Uganda. During 2.5 months of the rainy season in 2017, three passive sampler systems were deployed at five locations in River Mayanja to collect 14 days of composite samples. Grab samples were taken from drinking water resources. In these samples, 27 compounds out of 265 organic pesticides including 60 transformation products were detected. In the drinking water resources, we detected eight pesticides and two insecticide transformation products in low concentrations between 1 and 50 ng/L. Also, in the small streams and open fetch ponds, detected concentrations were generally low with a few exceptions for the herbicide 2,4-D and the fungicide carbendazim exceeding 1 ug/L. The widespread occurrence of chlorpyrifos posed the largest risk for macroinvertebrates. The extensive detection of this compound and its transformation product 3,4,5-trichloro-2-pyridinol was unexpected and called for a better understanding of the use and fate of this pesticide.

Carbon and hydrogen stable isotope fractionation of sulfamethoxazole during anaerobic transformation catalyzed by Desulfovibrio vulgaris Hildenborough

The fate of antibiotics in aquatic environments is of high concern and approaches are needed to assess the transformation of antibiotics in wastewater treatment plants. Here we used the model organism Desulfovibrio vulgaris Hildenborough to analyze compound specific isotope fractionation associated with anaerobic transformation of the antibiotic sulfamethoxazole (SMX). The results show that the rearrangement of the isoxazole ring in SMX is leading to significant carbon and hydrogen isotopic fractionation (εC = -5.8 ± 0.7‰, εH = -34 ± 9‰) during anaerobic transformation. The observed carbon isotopic fractionation is significantly higher than the values reported for aerobic degradation (εC = -0.6 ± 0.1‰) or abiotic reactions (εC = -0.8 to -4.8‰ for photolysis, εC = -0.8 to -2.2‰ for advanced oxidation). This indicates that carbon isotope fractionation can be used as a parameter to differentiate reaction mechanisms of SMX transformation. The corresponding apparent kinetic isotope effect (AKIEC) for anaerobic transformation of SMX was 1.029 ± 0.003, suggesting that the mechanism for anaerobic transformation is distinct from the mechanism reported for microbial aerobic degradation (AKIEC = 1.006 ± 0.001). In addition, dual-element (C-H) isotope analysis of SMX was performed in the present study, which was achieved by utilizing gas chromatography (GC) as the separation method instead of routine liquid chromatography. This dual-element isotope analysis resulted in a Λ value of 4.5 ± 2.2. Overall, compound specific isotope analysis can be a feasible tool to monitor the mitigation of SMX in wastewater treatment plants.

Influence of the Type and the Amount of Surfactant in Phillipsite on Adsorption of Diclofenac Sodium

Modified phillipsite samples were prepared with two different amounts (monolayer and bilayer coverage) of surfactants octadecyldimethylbenzylammonium chloride (O) and dodecylamine (D). Composites were characterized by Fourier transform infrared spectroscopy with attenuated total reflectance (FTIR–ATR), thermal analysis and determination of zeta potential, and subsequently tested for removal of diclofenac sodium (DCF). Drug adsorption experiments were performed under different initial DCF concentrations and different contact times. In order to investigate the influence of the chemical structure of surfactants used for modification of phillipsite on the preparation and properties of composites and DCF adsorption, experimental data were compared with previously published results on DCF adsorption by composites containing phillipsite and the same amounts of surfactants cetylpyridinium chloride (C) and Arquad®2HT-75 (A). DCF adsorption isotherms for O and D composites showed a better fit with the Langmuir model with maximum adsorption capacities between 12.3 and 38.4 mg/g and are similar to those for C and A composites, while kinetics run followed a pseudo-second-order model. Composites containing either benzyl or pyridine functional groups showed higher adsorption of DCF, implying that surfactant structure has a significant impact on drug adsorption. Drug adsorption onto O, D, C and A composites was also confirmed by FTIR–ATR spectroscopy and zeta potential measurements.

Fe3O4-Halloysite Nanotube Composites as Sustainable Adsorbents: Efficiency in Ofloxacin Removal from Polluted Waters and Ecotoxicity

The present work aimed at decorating halloysite nanotubes (HNT) with magnetic Fe₃O₄ nanoparticles through different synthetic routes (co-precipitation, hydrothermal, and sol-gel) to test the efficiency of three magnetic composites (HNT/Fe₃O₄) to remove the antibiotic ofloxacin (OFL) from waters. The chemical-physical features of the obtained materials were characterized through the application of diverse techniques (XRPD, FT-IR spectroscopy, SEM, EDS, and TEM microscopy, thermogravimetric analysis, and magnetization measurements), while ecotoxicity was assessed through a standard test on the freshwater organism Daphnia magna. Independently of the synthesis procedure, the magnetic composites were successfully obtained. The Fe₃O₄ is nanometric (about 10 nm) and the weight percentage is sample-dependent. It decorates the HNT's surface and also forms aggregates linking the nanotubes in Fe₃O₄-rich samples. Thermodynamic and kinetic experiments showed different adsorption capacities of OFL, ranging from 23 to 45 mg g^-1. The kinetic process occurred within a few minutes, independently of the composite. The capability of the three HNT/Fe₃O₄ in removing the OFL was confirmed under realistic conditions, when OFL was added to tap, river, and effluent waters at µg L^-1 concentration. No acute toxicity of the composites was observed on freshwater organisms. Despite the good results obtained for all the composites, the sample by co-precipitation is the most performant as it: (i) is easily magnetically separated from the media after the use; (ii) does not undergo any degradation after three adsorption cycles; (iii) is synthetized through a low-cost procedure. These features make this material an excellent candidate for removal of OFL from water.

Detection Limits of Antibiotics in Wastewater by Real-Time UV–VIS Spectrometry at Different Optical Path Length

Real-time monitoring of antibiotics in hospital and pharmaceutical wastewater using ultraviolet–visible (UV–Vis) spectroscopy is considered a promising method. Although gas chromatography–mass spectrometry (GC–MS) and other methods can detect antibiotics with quite low limits of detection (LOD), they possess various limitations. UV–Vis spectroscopy combined with chemometric methods is a promising choice for monitoring antibiotics. In this study, two immersed in situ UV–Vis sensors were used to explore the relationship between absorption spectra and antibiotics and study the influence of the optical path length on the LOD. The LODs of sensor 2 using a 10 cm optical path is up to 300 times lower than that of sensor 1 using a 0.5 mm optical path. Moreover, multiple antibiotics in the wastewater were investigated in real-time manner. The absorption spectra of 70 groups of wastewater samples containing different concentrations of tetracycline, ofloxacin, and chloramphenicol were measured. The results indicate that the nine wavelengths selected by interval partial least squares (iPLS) after the second derivative pretreatment have better predictability for ofloxacin and the six wavelengths selected by competitive adaptive reweighted sampling (CARS) after the first derivative. The multi-fold cross-validation results indicate that the model has a good predictive ability.

A review of the main methods for composite adsorbents characterization

Adsorption is a promising technology for removing several contaminants from aqueous matrices. In the last years, researchers worldwide have been working on developing composite adsorbents to overcome some limitations and drawbacks of conventional adsorbent materials, which depend on various factors, including the characteristics of the adsorbents. Therefore, it is essential to characterize the composite adsorbents to describe their properties and structure and elucidate the mechanisms, behavior, and phenomenons during the adsorption process. In this sense, this work aimed to review the main methods used for composite adsorbent characterization, providing valuable information on the importance of these techniques in developing new adsorbents. In this paper, we reviewed the following methods: X-Ray diffraction (XRD); spectroscopy; scanning electron microscopy (SEM); N2 adsorption/desorption isotherms (BET and BJH methods); thermogravimetry (TGA); point of zero charge (pHPZC); elemental analysis; proximate analysis; swelling and water retention capacities; desorption and reuse.

Distribution, ecological fate, and risks of steroid estrogens in environmental matrices

Over the past two decades, steroidal estrogens (SEs) such as 17α-ethylestradiol (EE2), 17β-estradiol (E2),17α-estradiol (17α-E2), estriol (E3) and estrone (E1) have elicited worldwide attention due to their potentially harmful effects on human health and aquatic organisms even at low concentration ng/L. Natural steroidal estrogens exhibit greater endocrine disruption potency due to their high binding effect on nuclear estrogen receptors (ER). However, less has been explored regarding their associated environmental risks and fate. A comprehensive bibliometric study of the current research status of SEs was conducted using the Web of Science to assess the development trends and current knowledge of SEs in the last two decades, from 2001 to 2021 October. The number of publications has tremendously increased from 2003 to 2021. We summarized the contamination status and the associated ecological risks of SEs in different environmental compartments. The results revealed that SEs are ubiquitous in surface waters and natural SEs are most studied. We further carried out an in-depth evaluation and synthesis of major research hotspots and the dominant SEs in the matrices were E1, 17β-E2, 17α-E2, E3 and EE2. Nonetheless, investigations of SEs in soils, groundwater, and sediments remain scarce. This study elucidates SEs distribution, toxicological risks, ecological fate and mitigation measures, which will be beneficial for future monitoring, management, and risk assessment. Further studies are recommended to assess the toxicological risks of different SEs in complex environmental matrices to pursue a more precise and holistic quantitative estimation of estrogenic risk.

Novel composite of Zn/Ti-layered double hydroxide coupled with MXene for the efficient photocatalytic degradation of pharmaceuticals

In the present study, a hybrid photocatalyst of Zn/Ti layered double hydroxide (LDH) coupled with MXene - Ti₃C₂ was synthesized for the first time and applied in photocatalytic degradation of acetaminophen and ibuprofen, two commonly present in the natural environment and prone to accumulate in the aquatic ecosystem pharmaceuticals. The effect of MXene content (0.5 wt%, 2.5 wt%, and 5 wt%) on the photocatalytic activity of LDH/MXene composite was investigated. The composite of LDH/MXene containing 2.5 wt% of MXene revealed the highest photocatalytic activity in the degradation of acetaminophen (100% within 40 min) and ibuprofen (99.7% within 60 min). Furthermore, an improvement in acetaminophen and ibuprofen mineralization was observed for the composite material. Meanwhile, the introduction of interfering ions (Na⁺, Ca²⁺, Mg²⁺, Cl^-, SO₄^2-) in the model seawater did not affect the removal efficiency of both pharmaceuticals. The photocatalytic experiment performed in the four subsequent cycles, as well as FTIR, TEM, and XPS analyses after the photodegradation process confirmed the excellent stability and reusability of the prepared composite material. In order to evaluate the effect of various reactive oxidizing species (ROS) on the photocatalytic process, the trapping experiment was applied. It was noticed that •O₂^- had the main contribution in photocatalytic degradation of acetaminophen, while •OH and h⁺ mainly affected the degradation of ibuprofen. Finally, based on the results of Mott Schottky analysis, bandgap calculation, and ROS trapping experiment, the possible mechanism for pharmaceuticals degradation was proposed. This research illustrates the feasibility and novelty of the treatment of pharmaceuticals by LDH/MXene composites, implying that MXene plays a significant role in the electron-hole separation and thus high photocatalytic activity.

Techniques for remediation of pharmaceutical pollutants using metal organic framework - Review on toxicology, applications, and mechanism

Treatment of recalcitrant and xenobiotic pharmaceutical compounds in polluted waters have gained significant attention of the environmental scientists. Antibiotics are diffused into the environment widely owing to their high usages, very particularly in the last two years due to over consumption during covid 19 pandemic worldwide. Quinolones are very effective antibiotics, but do not get completely metabolized due to which they pose severe health hazards if discharged without proper treatment. The commonly reported treatment methods for quinolones are adsorption and advanced oxidation methods. In both the treatment methods, metal organic frameworks (MOF) have been proved to be promising materials used as stand-alone or combined technique. Many composite MOF materials synthesized from renewable, natural, and harmless materials by eco-friendly techniques have been reported to be effective in the treatment of quinolones. In the present article, special focus is given on the abatement of norfloxacin and ofloxacin contaminated wastewater using MOFs by adsorption, oxidation/ozonation, photocatalytic degradation, electro-fenton methods, etc. However, integration of adsorption with any advanced oxidation methods was found to be best remediation technique. Of various MOFs reported by several researchers, the MIL-101(Cr)-SO₃H composite was able to give 99% removal of norfloxacin by adsorption. The MIL - 88A(Fe) composite and Fe LDH carbon felt cathode were reported to yield 100% degradation of ofloxacin by photo-Fenton and electro-fenton methods respectively. The synthesis methods and mechanism of action of MOFs towards the treatment of norfloxacin and ofloxacin as reported by several investigation reports are also presented.

Occurrence of Selected Emerging Contaminants in Southern Europe WWTPs: Comparison of Simulations and Real Data

Emerging contaminants (ECs) include a diverse group of compounds not commonly monitored in wastewaters, which have become a global concern due to their potential harmful effects on aquatic ecosystems and human health. In the present work, six ECs (ibuprofen, diclofenac, erythromycin, triclosan, imidacloprid and 17α-ethinylestradiol) were monitored for nine months in influents and effluents taken from four wastewater treatment plants (WWTPs). Except for the case of ibuprofen, which was in all cases in lower concentrations than those usually found in previous works, results found in this work were within the ranges normally reported. Global removal efficiencies were calculated, in each case being very variable, even when the same EC and facility were considered. In addition, the SimpleTreat model was tested by comparing simulated and real ibuprofen, diclofenac and erythromycin data. The best agreement was obtained for ibuprofen which was the EC with the highest removal efficiencies.

Antibiotics in the Basque coast (N Spain): Occurrence in waste and receiving waters, and risk assessment (2017-2020)

The study of the presence of antibiotics in the aquatic environment is a preliminary step to analyse their possible harmful effects on aquatic ecosystems. In order to monitor their occurrence in the aquatic environment, the European Commission established in 2015, 2018, and 2020 three Watch Lists of substances for Union-wide monitoring (Decisions (EU) 2015/495, 2018/840, and 2020/1161), where some antibiotics within the classes of macrolides, fluoroquinolones and penicillins were included. In the Basque coast, northern Spain, three macrolide antibiotics (erythromycin, clarithromycin, azithromycin) and ciprofloxacin were monitored quarterly from 2017 to 2020 (covering a period before and after the COVID19 outbreak), in water samples collected from two Waste Water Treatment Plants (WWTPs), and three control points associated with receiving waters (transitional and coastal water bodies). This work was undertaken for the Basque Water Agency (URA). The three macrolide antibiotics in water showed a frequency of quantification >65 % in the Basque coast, with higher concentrations in the WWTP emission stations than in receiving waters. Their frequency of quantification decreased from 2017 to 2020, as did the consumption of antibiotics in Spanish primary care since 2015. Ciprofloxacin showed higher frequencies of quantification in receiving waters than in wastewaters, but the highest concentrations were observed in the WWTP emission stations. Although consumption of fluoroquinolones (among which is ciprofloxacin) in primary care in the Basque Country has decreased in recent years, this trend was not observed in the waters sampled in the present study. On the other hand, concentrations of clarithromycin, azithromycin, and ciprofloxacin in receiving waters exceeded their respective Predicted No-Effect Concentrations, so they could pose an environmental risk. These substances are widely used in human and animal medicine, so, although only ciprofloxacin is included in the third Watch List, it would be advisable to continue monitoring macrolides in the Basque coast as well.

Impact of melatonin on the hydrogen peroxide treatment efficacy in Microcystis aeruginosa: Cell growth, oxidative stress response, and gene transcription

A study was conducted to determine how melatonin (MLT), a growth regulator, affects Microcystis aeruginosa cell behaviour and how MLT exposed cells respond to hydrogen peroxide (H₂O₂) treatment. MLT promotes the growth, chl-a content, Fv/Fm values, and microcystins (MCs) production of M. aeruginosa at low concentrations of 1-2.5 μmol/L but suppresses the growth at high concentrations (5-10 μmol/L). The cellular and genetic responses of MLT pre-treated cells to H₂O₂ treatment were examined further. Further research found that the cells pre-treated with MLT were susceptible to a range of growth-promoting, inhibiting and lethal effects when exposed to higher levels of H₂O₂. A dose-dependent pattern was observed under conditions of 0.05-0.2 mmol/L H₂O₂ with 0.5-2.5 μmol/L MLT concentrations to different degrees. High doses of H₂O₂ (0.2 and 0.3 mmol/L) typically lead to cell lysis and release of MCs in 5.0 and 10 μmol/L MLT pre-treated cells. A decrease in SOD/CAT activities and an increase in MDA levels validated the growth reduction. Furthermore, higher cell lysis and release of intracellular MCs were observed when H₂O₂ was increased for 5-10 μmol/L MLT pre-treated cells. This led to a higher accumulation of extracellular MCs. The results provide insight into how MLT influences H₂O₂ damage and assist in identifying situations where H₂O₂ treatment of cyanobacterial blooms is most appropriate.

One-pot synthesis of porous N-doped hydrochar for atrazine removal from aqueous phase: Co-activation and adsorption mechanisms

KOH-activated N-doped hydrochar (KHCN) was synthesized via co-activation method to eliminate atrazine (AT) in water efficiently. Compared to primitive HC, KHCN had advantages of splendid specific surface area (1205.82 m2/g) and developed microsphere structures on the surface. Specially for KHCN, the extra melamine added strengthened and preserved partial structure of polar oxygen-containing groups that were decomposed in the process of pore making. Besides, the estimated uptake amount of AT onto KHCN (216.50 mg/g) was remarkably superior to KHC (114.25 mg/g). KHCN exhibited the pH-dependence for AT removal, and presented excellent uptake capacity at a relatively neutral environment. Notably, the proposed mechanisms for AT removal by KHCN included electrostatic attraction, pore filling, π-π EDA, H-bond as well as hydrophilic effect. Hence, the porous N-doped hydrochar was a kind of adsorbent which was easy to prepare and had the application prospect for AT removal in natural water.

Occupational and residential exposures to organophosphate and pyrethroid pesticides in a rural setting

Organophosphate (OP) and pyrethroid pesticides (PYR) are extensively used in agriculture, resulting in higher exposures among farmworkers. The present study reports the occurrence of 8 urinary OP and PYR metabolites in a sample of farmworkers and residents from Sucs (n = 87), a rural township in North West Catalonia (Spain). The aim of the present study was to examine differences in urinary pesticide metabolite concentrations between occupationally-exposed (farmworkers; n = 45) and environmentally-exposed subjects (n = 42) and to assess the relationship between pesticide's exposures and occupational activities in a real-case scenario. Six OP and two PYR metabolites have been investigated, urine samples were extracted using SPE extraction and analyzed by UPLC-MS/MS. Three OP metabolites were commonly detectable in urine, namely TCPY (metabolite of chlorpyrifos), PNP (parathion) and DEAMPY (pirimiphos). Regarding pyrethroids, the two analyzed metabolites, 3-PBA and 4F-3-PBA, were detected in a high proportion of urine samples. Differences in concentrations between both groups were statistically significant for TCPY and 4F-3-PBA (Mann-Whitney U Test for independent groups, p < 0.05). In the case of TCPY, the concentrations were higher among the farmworkers, which is consistent with their occupational activity. The small differences found in DEAMPY, PNP, 3-PBA or even the significant higher concentrations of 4F-3-PBA among rural population suggest a general exposure to these compounds, even in those who do not carry an occupational activity. Specific personal protective equipment (PPE) among farmworkers, such as the use of gloves and mask during mixing, showed a decrease in the exposure levels, although the differences were not statistically significant. However, a positive association was found between the use of a cap during mixing (for PNP and 3-PBA) and during application (only for 3-PBA). However, this piece of cloth is mainly used for sun protection, and when not cleaned after the handling of pesticides, it might represent a continuous source of exposure through dermal contact. Farmworkers using tractors with cabin had statistically significant lower concentrations of DEAMPY than those using a tractor without cabin. The previous results suggest that occupational protections should be encouraged among farmworkers and other potential workers handling with pesticides.

The role of the sewer system in estimating urban emissions of chemicals of emerging concern

The use of chemicals by society has resulted in calls for more effective control of their emissions. Many of these chemicals are poorly characterized because of lacking data on their use, environmental fate and toxicity, as well as lacking detection techniques. These compounds are sometimes referred to as contaminants of emerging concern (CECs). Urban areas are an important source of CECs, where these are typically first collected in sewer systems and then discharged into the environment after being treated in a wastewater treatment plant. A combination of emission estimation techniques and environmental fate models can support the early identification and management of CEC-related environmental problems. However, scientific insight in the processes driving the fate of CECs in sewer systems is limited and scattered. Biotransformation, sorption and ion-trapping can decrease CEC loads, whereas enzymatic deconjugation of conjugated metabolites can increase CEC loads as metabolites are back-transformed into their parent respective compounds. These fate processes need to be considered when estimating CEC emissions. This literature review collates the fragmented knowledge and data on in-sewer fate of CECs to develop practical guidelines for water managers on how to deal with in-sewer fate of CECs and highlights future research needs. It was assessed to what extent empirical data is in-line with text-book knowledge and integrated sewer modelling approaches. Experimental half-lives (n = 277) of 96 organic CECs were collected from literature. The findings of this literature review can be used to support environmental modelling efforts and to optimize monitoring campaigns, including field studies in the context of wastewater-based epidemiology.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s11157-022-09638-9.

Synthesis and preparation of acid capped CdSe nanocrystals as successful adsorbent and photocatalyst for the removal of dyes from water and its statistical physics analysis

In this study, mercaptosuccinic acid capped CdSe nanocrystals were successfully synthesized and used as photocatalyst for the effective removal of methylene blue (MB) inaqueous solution under visible light and sunlight irradiations including its analysis with statistical physics theory. Dye adsorption properties of these nanocrystals were investigated via experimental kinetics and equilibrium studies. These experimental data were modeled via the application of statistical physics theory to explain the corresponding adsorption mechanism and to characterize the steric and energetic parameters involved in the dye removal. A maximum adsorption capacity of 27.07 mg g^-1 (80% of dye removal) was observed in 10 min using an initial concentration of 30 mg L^-1. Statistical physics calculations indicated that the adsorption energy was lower than 40 kJ mol^-1. It was also established that the dye adsorption was associated to the electrostatic interactions and hydrogen bonding where dye aggregation and multi-molecular adsorption were expected. Overall, the dye removal was a spontaneous, feasible and exothermic. It was concluded that adsorption properties of CdSe-MSA nanocrystals improved the dye photo-catalytic degradation efficiency under visible light thus achieving up to 80% degradation efficiency in 60 min. The synergic effect of adsorption and photo-catalytic degradation performance was mainly due to the surface area (136.43 m² g^-1), small size (3.7 nm), and structural defects (selenium vacancies S_e, interstitial of cadmium I_Cd) of CdSe nanocrystals, which enhanced both the response of these nanomaterials to visible light and their photo-catalytic activity. In summary, these nanocrystals are promising materials to be used in wastewater treatment under sunlight for the removal of organic compounds like dyes.