Facile fabrication of hierarchical porous ZIF-8 for enhanced adsorption of antibiotics

A facile fabrication of a multi-functional and hierarchical Zn-based MOF as an efficient catalyst for CO2 fixation at room-temperature

Multi-functional and hierarchical Zn-MOF was rapidly synthesized by room-temperature stirring using an organic amine as a protonation agent and exhibited remarkable improvement for CO₂ cycloaddition to bulky epoxides.

Removal of sulfadiazine from aqueous solution by in-situ activated biochar derived from cotton shell

Phosphoric acid is used to in-situ activate biochar pyrolyzed by cotton shells to enhance the adsorption ability of sulfadiazine (SDZ). To confirm the optimum condition, different impregnation ratios and impregnation times were investigated. It was found that the biochar (BC) pyrolyzed under the condition of an impregnation ratio of 2.5 and an impregnation time of 6 h showed the highest performance for the removal of SDZ. The maximum adsorption ability was 86.89 mg/g at a temperature of 298 K. The pseudo-second-order model was used to disclose the adsorption process of SDZ by BCs. The experimental data were described by the Langmuir and Temkin isotherms at different temperatures. It was found that the sorption of SDZ was an exothermic process according to the thermomechanical analysis. The activated BC could be recycled for at least five times with a high removal rate of SDZ. Thus, activated BCs are regarded as promising adsorbents for SDZ removal.

Adsorption isotherm models: Classification, physical meaning, application and solving method

Adsorption is widely applied separation process, especially in environmental remediation, due to its low cost and high efficiency. Adsorption isotherm models can provide mechanism information of the adsorption process, which is important for the design of adsorption system. However, the classification, physical meaning, application and solving method of the isotherms have not been systematical analyzed and summarized. In this paper, the adsorption isotherms were classified into adsorption empirical isotherms, isotherms based on Polanyi's theory, chemical adsorption isotherms, physical adsorption isotherms, and the ion exchange model. The derivation and physical meaning of the isotherm models were discussed in detail. In addition, the application of the isotherm models were analyzed and summarized based on over 200 adsorption equilibrium data in literature. The statistical parameters for evaluating the fitness of the models were also discussed. Finally, a user interface (UI) was developed based on Excel software for solving the isotherm models, which was provided in supplemental material and can be easily used to model the adsorption equilibrium data. This paper will provide theoretical basis and guiding methodology for the selection and use of the adsorption isotherms.

Hierarchically porous metal-organic frameworks: synthesis strategies, structure(s), and emerging applications in decontamination

Metal-organic frameworks (MOFs) with high porosity have received much attention as promising materials for many applications owing to their unique properties. However, to date, most of the reported MOFs have microporous structures, which slow down diffusion/mass transfer and limit the accessibility of bulky molecules to its internal surface. Thus, it is crucial to develop an efficient way to create larger pores (mesoporous and/or macroporous) into microporous MOFs to form hierarchical porous metal-organic frameworks (HP-MOFs), which facilitate the diffusion and mass transfer of guest molecules. HP-MOFs are excellent and promising candidates for environmental applications under the background of environmental contaminations. In this review paper, we are primarily focusing on the latest progress in the preparation of HP-MOFs by employing template-assisted and template-free synthetic approaches for environmental cleaning applications. Particularly, the adsorptive purification of the most common toxic substances, including gases, dyes, heavy metal ions, and antibiotics from the environment using HP-MOFs as adsorbents is briefly discussed. The overall results clearly showed that the superiority of HP-MOFs compared with conventional microporous MOFs. Finally, we summarize the remaining challenges and provide personal perspectives on possible future development of HP-MOFs.

In Situ Growth of Ca2+-Based Metal-Organic Framework on CaSiO3/ABS/TPU 3D Skeleton for Methylene Blue Removal

The work reports a novel strategy for combining polymers and metal–organic frameworks (MOFs) into composites for adsorption applications. Calcium silicate (CaSiO₃) was introduced into acrylonitrile butadiene styrene/thermoplastic polyurethane (ABS/TPU) alloy, and the CaSiO₃/ABS/TPU skeleton was fabricated by 3D printing technology. The Ca-MOF was directly loaded on the surface of acetone-etched 3D skeleton by in-situ growth method. The obtained 3D skeleton was characterized and the performance of methylene blue (MB) adsorption was determined. It is clear that Ca-MOF is successfully loaded on the surface of 3D skeleton due to the presence of CaSiO₃. The MB adsorption ratios of the solutions with initial concentrations of 50, 100 and 200 mg/L at the equilibrium time (5 h) are 88%, 88% and 80%, respectively, revealing good MB adsorption performance of the 3D skeleton. The MB adsorption ratio remains 70% at six runs of adsorption–desorption experiment, indicating the excellent recovering property of the skeleton. The results show that the prepared CaSiO₃/ABS/TPU 3D skeleton is a candidate adsorbent for printing and dyeing effluent treatment.

Efficient removal of tylosin by nitrogen-doped mesoporous carbon nanospheres with tunable pore sizes

Efficient and selective removal of antibiotics from wastewater is quite important but challenging. In this work, the nitrogen-doped mesoporous carbon nanospheres (NMCN) with different pore size (from 2.67 to 4.62 nm) were successfully prepared by changing the hydrothermal condition, and their removal performance on tylosin was evaluated. The adsorption experimental data were fitted well with the pseudo-second-order kinetic model. Besides, Langmuir isotherm model could better describe the adsorption process. Notably, the NMCN with medium pore size (3.36 nm) exhibited the highest adsorption capacity (1333 mg g^-1), which was 24% and 14% higher than that of NMCNs with smaller and larger pore size, respectively. In order to study the adsorption mechanism, the mesoporous carbon nanospheres without N-doped was prepared, and the comparison of nitrogen adsorption-desorption isotherms was conducted. The result proved that in addition to the modified surface property, large specific surface area, and high pore volume, the pore size could precisely influence the adsorption performance of the proposed adsorbent. Furthermore, the proposed NMCN material possessed a selective adsorbing ability toward tylosin in the presence of tetracycline. Clearly, the NMCN was a promising alternative to be used as high efficient and selective adsorbent in practical environment pollution treatment, especially in large-size molecule adsorption.

A water resistance magnetic graphene-anchored zeolitic imidazolate framework for efficient adsorption and removal of residual tetracyclines in wastewater

Water-resistant magnetic graphene-anchored zeolite imidazolate (Fe₃O₄/ZIF-8-G) composite materials with the largest surface area are formed by directly growing a hydrophobic ZIF-8 skeleton onto a graphene support through self-assembly in methanol. Fe₃O₄/ZIF-8-G hybrid composite has water resistance and super strong adsorption capacity, and is used as an effective adsorbent for adsorption and removal of residual tetracycline in wastewater. The morphologies and structure, as well as water resistance of Fe₃O₄/ZIF-8-G, were characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetry analysis (TGA), N₂ adsorption and pH_PZC. The adsorption for tetracycline (TC), oxytetracycline (OTC) and chlortetracycline (CTC) followed pseudo-second-order kinetics and fitted the Freundlich adsorption model with the simultaneous adsorption capacity for TC (382.58 mg g^-1), OTC (565.94 mg g^-1) and CTC (608.06 mg g^-1) at pH 5-6 for 10 h. These were much higher than previously reported results for the removal of tetracycline from aqueous solutions. The used Fe₃O₄/ZIF-8-G could be effectively reused and recycled at least five times without significant loss of adsorption capacity. The hydrophobic and π-π interaction between the aromatic rings of TCs and the aromatic imidazole rings of the ZIF-8-G framework were the main adsorption mechanism on the surface of Fe₃O₄/ZIF-8-G. Constructing a hydrophobic surface of ZIF-8/G framework resulted in a reduction of the hydrophilic sites of the surface. This can improve stability and selective adsorption of ZIF-8-G framework. In addition, the results show no significant difference in the adsorption kinetics and adsorption capacity of Fe₃O₄/ZIF-8-G for TC, OTC and CTC in pure water and wastewater.

The tetracyclines removal by MgAl layered double oxide in the presence of phosphate or nitrate: Behaviors and mechanism exploration

Pollution of tetracyclines (TCs) in swine wastewater has been a critical concern worldwide. Notably, multiple anions (e.g. PO₄^3-, NO₃^-) coexist in the actual environments, which could significantly influence the TCs removal. In the current study, MgAl layered double oxide (MgAl-LDO) was adopted for investigating the TC removal performance with/without PO₄^3- or NO₃^-. In all systems, the adsorption performance exhibited two different approaches between low and high TC concentrations. In the single system, pseudo-second-order and the Freundlich model fitted well to the equilibrium adsorption data when TC concentration was below 125 mg·L^-1, while the pseudo-first-order and the linear model could describe the removal process at high TC concentration (>125 mg·L^-1). The maximum adsorption capacity was 83.56 mg·g^-1. In the co-existing system, the adsorption capacity was slightly enhanced when TC concentration below 150 mg·L^-1 however was inhibited at high concentration (>150 mg·L^-1). Combined with the characterization analyses, the interaction mechanism at low concentration was primarily surface adsorption on reconstructed LDH from LDO in the TC-alone system. It is worth mention that both PO₄^3- and NO₃^- facilitated the formation of LDH via rehydration of LDO which enhanced surface adsorption in the co-existing system. At high TC concentration, the formation of tetracycline-metal complexes played a dominant role in TC removal in the single system, whereas diminished complexation in the binary system led to the decreased TC removal. This study provides a theoretical and practical guidance for MgAl-LDO on the efficient remediation of actual tetracyclines wastewater.

3D-Printed metal-organic frameworks within biocompatible polymers as excellent adsorbents for organic dyes removal

Three-dimensional (3D) printing technique has received exceptional global attention as it can create a myriad of high-resolution architectures from digital models. In the present study, 3D-printed metal-organic frameworks (MOFs) were shaped into several geometries via direct ink writing, which overcomes the instability and high-pressure drop of powdery MOF during the flow of gas or liquid streams. The inclusion of a blend of calcium alginate and gelatin (CA-GE) as biocompatible binder allowed for easy writing and an enhanced mechanical property. Besides, it was found that the printing geometry (square, hexagon, and circle), MOF loading amount, and MOF size also greatly influenced the adsorptive performance. For instance, the methylene blue adsorption efficiency of CA-GE scaffolds without MOF was only 43.6%, while the printed MOF/CA-GE sample exhibited 99.8% adsorption efficiency at 20 min. Both the inherent microporous structure of MOFs and meso/macroporous structures of the 3D matrix contributed to the excellent adsorption properties towards a variety of organic dyes and their mixtures. Furthermore, the 3D-printed adsorbents can be easily regenerated in dilute acid solution and reused for at least 7 times without performance loss. In contrast, the powdery MOF can only be repeatedly used for at most 2 times.

Luminescent lanthanide metal-organic framework test strip for immediate detection of tetracycline antibiotics in water

Tetracycline antibiotics (TCs) are a kind of commonly used antibiotics for treating infections, however, the overuse of TCs has adversely affected human health and the ecosystem. Thus, detection of TCs in water is important but challenging. In this work, a luminescent lanthanide metal-organic framework (LnMOF) sensor (1) for immediate detection of oxytetracycline (OTC) and tetracycline (TC) is developed. The sensor has high acid-base and water stability. Investigation reveals that among the 27 species of antibiotics, anions and cations under investigation, 1 shows highly selective sensing towards OTC and TC, and the detection is not disturbed by the presence of other species. The limit of detection (LOD) for OTC and TC are ultra-sensitive value of 1.95 and 2.77 nM, respectively. Investigation reveals the sensing mechanism is due to the inner filter effect. Further studies reveal that the sensor can be used in real sample monitoring. More importantly, test strips based on 1 are manufactured. They are an easy-to-use, low-cost, highly selective and sensitive sensing device for detecting OTC and TC. The sensing can be distinguished immediately and easily by the naked eyes, making it an excellent candidate to monitor OTC and TC in real use.

Batch interaction of emerging tetracycline contaminant with novel phosphoric acid activated corn straw porous carbon: Adsorption rate and nature of mechanism

In this work, corn straw (CS) based porous carbon was prepared by one-step phosphoric acid (H₃PO₄) low temperature activation. The impregnation ratios (H₃PO₄/CS, g/g) played an important role in the pore development. ACS_300-1 engineered at 300 °C and the impregnation ratio of 1.0 showed the maximal specific surface area of 463.89 m²/g with total pore volume of 0.387 cm³/g, attaining a high tetracycline (TC) uptake of 227.3 mg/g. The adsorption of TC onto ACS_300-1 was found tolerant with wide pH (2.0-10.0) and high ionic strength (0 - 0.5 M). The adsorption data can be fitted well by the pseudo-second order kinetic model and Langmuir isotherm model. The endothermic and spontaneous properties of the adsorption system was implied by Thermodynamic study. The findings of the current work conclude that one-step H₃PO₄ activation is a green and promising method for corn straw based porous carbon that may be found with great potentials in antibiotic containing wastewater treatment.

Transformation of novel TiOF2 nanoparticles to cluster TiO2-{001/101} and its degradation of tetracycline hydrochloride under simulated sunlight

The anatase type cluster TiO₂-{001/101} was rapidly generated by a one-step hydrothermal method. The transformation process of coral-like TiOF₂ nanoparticles to cluster TiO₂-{001/101} was investigated for the first time, and the sensitization between cluster TiO₂-{001/101} and tetracycline hydrochloride (TCH) was also discussed. The degradation rate of TCH by cluster TiO₂-{001/101} under simulated sunlight was 92.3%, and the total removal rate was 1.76 times that of P25. Besides, cluster TiO₂-{001/101} settles more easily than P25 in deionized water. The study showed that cluster TiO₂-{001/101} derived from coral-like TiOF₂ nanoparticles had a strong adsorption effect on TCH, which was attributed to the oxygen vacancy (O_v) and {001} facets of cluster TiO₂-{001/101}. The strong adsorption effect promoted the sensitization between cluster TiO₂-{001/101} and TCH, and widened the visible light absorption range of cluster TiO₂-{001/101}. In addition, the fluorescence emission spectrum showed that cluster TiO₂-{001/101} had a lower luminous intensity, which was attributed to the heterojunction formed by {001} facets and {101} facets that reduces the recombination rate of carriers. It should be noted that cluster TiO₂-{001/101} still has good degradation performance for TCH after five cycles of degradation. This study provides a new idea for the synthesis of cluster TiO₂-{001/101} with high photocatalytic performance for the treatment of TCH wastewater.

Degradation of tetracycline hydrochloride by cluster TiO₂-{001/101} under simulated sunlight.

Modification of diatomite with melamine coated zeolitic imidazolate framework-8 as an effective flame retardant to enhance flame retardancy and smoke suppression of rigid polyurethane foam

In this work, the core-shell structure (ZIF-8@MA) was prepared first with melamine (MA) coated zeolitic imidazolate framework-8 (ZIF-8), and the ternary composite ZMD containing Si-N-Zn was successfully synthesized with the diatomite modified ZIF-8@MA. Subsequently, the prepared ZMD was added into rigid polyurethane foam (RPUF) to investigate its effect on fire safety of RPUF. The results of cone calorimeter and limiting oxygen index (LOI) tests indicated that ZMD effectively reduced the fire hazard of RPUF. This was because of the physical barrier effect of diatomite, the co-catalyzed char formation in the condensed phase of ZnO produced by the decomposition of ZIF-8 and silica produced by the decomposition of diatomite, and the gas phase effect of MA that enabled RPUF to achieve excellent flame retardancy and smoke suppression. The specific mechanism of flame retardancy and smoke suppression of ZMD for RPUF was also discussed in this study.

Hierarchical Micro- and Mesoporous Zn-Based Metal-Organic Frameworks Templated by Hydrogels: Their Use for Enzyme Immobilization and Catalysis of Knoevenagel Reaction

Encapsulation of enzymes in metal-organic frameworks (MOFs) is often obstructed by the small size of the orifices typical of most reported MOFs, which prevent the passage of larger-size enzymes. Here, the preparation of hierarchical micro- and mesoporous Zn-based MOFs via the templated emulsification method using hydrogels as a template is presented. Zinc-based hydrogels featuring a 3D interconnecting network are first produced via the formation of hydrogen bonds between melamine and salicylic acid in which zinc ions are well distributed. Further coordination with organic linkers followed by the removal of the hydrogel template produces hierarchical Zn-based MOFs containing both micropores and mesopores. These new MOFs are used for the encapsulation of glucose oxidase and horseradish peroxidase to prove the concept. The immobilized enzymes exhibit a remarkably enhanced increased operational stability and enzymatic activity with a k_cat /k_m value of 85.68 mm s^-1 . This value is 7.7-fold higher compared to that found for the free enzymes in solution, and 2.7-fold higher than enzymes adsorbed on conventional microporous MOFs. The much higher catalytic activity of the mesoporous conjugate for Knoevenagel reactions is demonstrated, since the large pores enable easier access to the active sites, and compared with that observed for catalysis using microporous MOFs.

Novel Hierarchical Fe(III)-Doped Cu-MOFs With Enhanced Adsorption of Benzene Vapor

New hierarchical Fe(III)-doped Cu-MOFs (Fe-HK) were developed via introduction of Fe³⁺ ions during HKUST-1 synthesis. The obtained products were characterized by N₂ adsorption, X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, FTIR spectroscopy, and thermal analysis. The adsorption isotherms and kinetics of benzene vapor were measured and consecutive adsorption–desorption cycles were performed. It was found that the hierarchical-pore Fe-HK-2 exhibited optimal textural properties with high BET surface area of 1,707 m²/g and total pore volume of 0.93 cm³/g, which were higher than those of the unmodified HKUST-1. Significantly, the hierarchical-pore Fe-HK-2 possessed outstanding benzene adsorption capacity, which was 1.5 times greater than the value on HKUST-1. Benzene diffusivity of Fe-HK-2 was 1.7 times faster than that of parent HKUST-1. Furthermore, the benzene adsorption on Fe-HK-2 was highly reversible. The hierarchical-pore Fe-HK-2 with high porosity, outstanding adsorption capacity, enhanced diffusion rate, and excellent reversibility might be an attractive candidate for VOCs adsorption. This may offer a simple and effective strategy to synthesize hierarchical-pore MOFs by doping with other metal ions.