A systematic protocol of microplastics analysis from their identification to quantification in water environment: A comprehensive review

Surface-enhanced Raman scattering labeled nanoplastic models for reliable bio-nano interaction investigations

Nanoplastics (NPs) have attracted great attention as an emerging pollution. To date, their interaction with biological systems has been studied mostly by using fluorescent-labeled NPs, which suffered from serious drawbacks such as biological autofluorescence interference and false-positive results. Reliable optically labeled NP models are eagerly desired until now. Herein, a novel near-infrared (NIR) surface-enhanced Raman scattering (SERS) labeled NP model was proposed, which gained single-particle ultra-sensitivity, deep tissue detection, multiplex labeling ability, and anti-interference property. More importantly, the NP demonstrated satisfactory in vivo signal stability which completely prevented the positive-false problems. The advantages of the NPs enabled direct, dynamic in vivo behavior imaging study in living zebrafish embryo, adult zebrafish and green vegetable Brassica rapa. It was found for the first time that NPs entered blood circulation system of zebrafish larva via dermal uptake route, which only occurred in a short 48 h-window post-hatch. NPs widely distributed in roots, shoots and leaves of Brassica rapa seedlings germinating and growing in the NP-containing hydroponic culture. Different depths of one root showed varied adsorption capabilities towards NPs with fulvic acid, lipid and sodium dodecyl sulfate eco-coronas. This work provided an ideal tool for reliable bio-NP interaction study for a variety of organisms, which could promote the research of NPs.

Ecological risk assessment of marine microplastics using the analytic hierarchy process: A case study in the Yangtze River Estuary and adjacent marine areas

Microplastic (MP) pollution is ubiquitous in the terrestrial and marine environments, even in the air. However, ecological risk assessment studies of microplastics are scarce. In the present study, an ecological risk assessment model was built to evaluate the risks of microplastics in the Yangtze River Estuary and adjacent marine areas. A basic index database of the impacts of MP pollution on the ecosystem was constructed around three types of indices, namely, the pressure, status, and response indices. While the expert scoring method was used to determine the weights of these indices, in view of the complexity of the ecosystem in the Yangtze River Estuary, the fuzzy comprehensive evaluation method was used to evaluate its ecological risk. According to the model, microplastic pollution in the Yangtze River Estuary and adjacent marine areas was within a lower risk state, indicating that its risks for the marine ecosystem were still within a controllable range.

A Rapid Method for Detecting Microplastics Based on Fluorescence Lifetime Imaging Technology (FLIM)

With the increasing use and release of plastic products, microplastics have rapidly accumulated in ecological environments. When microplastics enter the food chain, they cause serious harm to organisms and humans. Microplastics pollution has become a growing concern worldwide; however, there is still no standardized method for rapidly and accurately detecting microplastics. In this work, we used fluorescence lifetime imaging technology to detect four kinds of Nile red-stained and unstained microplastics, and the unique phasor fingerprints of different microplastics were obtained by phasor analysis. Tracing the corresponding pixels of the “fingerprint” in the fluorescence lifetime image allowed for the quick and intuitive identification of different microplastics and their location distributions in a mixed sample. In our work, compared with staining the four microplastics with a fluorescent dye, using the phasor “fingerprint library” formed by the autofluorescence lifetimes of the microplastics was more easily distinguished than microplastics in the mixed samples. The feasibility of this method was further tested by adding three single substances—SiO₂, chitin and decabromodiphenyl ethane (DBDPE), and surface sediments to simulate interferent in the environment, and the results providing potential applications for the identification and analysis of microplastics in complex environments.

Emerging investigator series: microplastic sources, fate, toxicity, detection, and interactions with micropollutants in aquatic ecosystems - a review of reviews

Hundreds of review studies have been published focusing on microplastics (MPs) and their environmental impacts. With the microbiota colonization of MPs being firmly established, MPs became an important carrier for contaminants to step inside the food web all the way up to humans. Thus, the continuous feed of MPs into the ecosystem has sparked a multitude of scientific concerns about their toxicity, characterization, and interactions with microorganisms and other contaminants. The reports of common subthemes have agreed about many findings and research gaps but also showed contradictions about others. To unravel these equivocal conflicts, we herein compile all the major findings and analyze the paramount discrepancies among these review papers. Furthermore, we systematically reviewed all the highlights, research gaps, concerns, and future needs. The covered focus areas of MPs' literature include the sources, occurrence, fate, existence, and removal in wastewater treatment plants (WWTPs), toxicity, interaction with microbiota, sampling, characterization, data quality, and interaction with other co-contaminants. This study reveals that many mechanisms of MPs' behavior in aquatic environments like degradation and interaction with microbiota are yet to be comprehended. Furthermore, we emphasize the critical need to standardize methods and parameters for MP characterization to improve the comparability and reproducibility of the incoming research.

Seeking for a perfect (non-spherical) microplastic particle - The most comprehensive review on microplastic laboratory research

In recent decades, much attention has been paid to microplastic pollution, and research on microplastics has begun to grow exponentially. However, microplastics research still suffers from the lack of standardized protocols and methods for investigation of microplastics under laboratory conditions. Therefore, in this review, we summarize and critically discuss the results of 715 laboratory studies published on microplastics in the last five years to provide recommendations for future laboratory research. Analysis of the data revealed that the majority of microplastic particles used in laboratory studies are manufactured spheres of polystyrene ranging in size from 1 to 50 µm, that half of the studies did not characterize the particles used, and that a minority of studies used aged particles, investigated leaching of chemicals from microplastics, or used natural particles as a control. There is a large discrepancy between microplastics used in laboratory research and those found in the environment, and many laboratory studies suffer from a lack of environmental relevance and provide incomplete information on the microplastics used. We have summarized and discussed these issues and provided recommendations for future laboratory research on microplastics focusing on (i) microplastic selection, (ii) microplastic characterization, and (iii) test design of laboratory research on microplastics.

Recent Advances in Spectroscopic Techniques for the Analysis of Microplastics in Food

Microplastic pollution has become a worldwide concern in aquatic and terrestrial environments. Microplastics could also enter the food chain, causing potential harm to human health. To facilitate the risk assessment of microplastics to humans, it is critically important to have a reliable analytical technique to detect, quantify, and identify microplastics of various materials, sizes, and shapes from environmental, agricultural, and food matrices. Spectroscopic techniques, mainly vibrational spectroscopy (Raman and infrared), are commonly used techniques for microplastic analysis. This review focuses on recent advances of these spectroscopic techniques for the analysis of microplastics in food. The fundamental, recent technical advances of the spectroscopic techniques and their advantages and limitations were summarized. The food sample pretreatment methods and recent applications for detecting and quantifying microplastics in different types of food were reviewed. In addition, the current technical challenges and future research directions were discussed. It is anticipated that the advances in instrument development and methodology innovation will enable spectroscopic techniques to solve critical analytical challenges in microplastic analysis in food, which will facilitate the reliable risk assessment.

Investigating the Human Impacts and the Environmental Consequences of Microplastics Disposal into Water Resources

During the last decades, one of the most contentious environmental issues has been the investigation of the fate of microplastics (MPs) and detrimental consequences in natural and water resources worldwide. In this respect, it is critical research firstly to track the ways in which MPs are determined as key anthropogenic pollutants in terms of ecological risk and secondly to plan feasible policies under which the role of science and society in tackling this global issue in the future should be prioritized. In this study, a systematic theoretical, technical, and planning analysis was developed in alignment with a Scopus search deployed in the second half of the year 2021 and covering a wide chronological range (from 1970s onwards) and thematic contexts of analysis by using keywords and key phrases organized into two groups. The document results were graphically represented, revealing the main scientific focus of studies. Subsequently, our study investigated the quantitative assessment methods of MPs in marine environments, denoting the range of standard procedures applied for collecting and analyzing samples of water, bottom sediments, and coastal deposits. The technological part of the study includes the presentation of the relevant analytical techniques applied for MPs tracking and monitoring in water resources, determining the wide spectrum of plastic compounds traced. Of particular interest was the determination of environmental depletion and human implications caused, even by extremely low concentrations of MPs, for marine biota, posing potential risks to marine ecosystems, biodiversity, and food availability. Finally, the research proposed the challenges of actions needed to support scientific, industry, policy, and civil society communities to curb the ongoing flow of MPs and the toxic chemicals they contain into water resources, while rethinking the ways of plastics consumption by humanity.

Novel methodology for identification and quantification of microplastics in biological samples

Currently, the evidence of the ingestion of microplastics (MPs) by organisms or the accumulation in different environmental compartments has been achieved using several methodological procedures. However, its uses have not been standardized across studies. In this study, we aim to assess and validate a protocol that can be useful for optimizing the identification and quantification procedures of polyethylene microplastics (PE MPs) in biological samples. Initially, considering that numerous studies filter samples previously digested in cellulosic membranes for isolation and analysis of MPs, we evaluated whether washing these membranes with different reagents could contribute to the complete detachment of particles, as well as to their dispersion in the obtained solutions. However, none of the tested reagents (dimethyl sulfoxide, acetone, ethyl alcohol and chloroform), including purified water, was able to completely remove the MPs adhered to the membranes or facilitate their dispersion in the solutions. On the other hand, we observed that the digestion of the membranes by acetonitrile constituted a procedure that prevents the loss of particles due to adherence, in addition to promoting good dispersion of MPs. Subsequently, we evaluated the use of Neubauer chambers for the quantification of MPs, having observed a good recovery rate (>92%) and results with insignificant variation, in PE MPs solutions with different concentrations (0.15; 0.075 and 0.0375 mg/mL). Ultimately, the validation of the proposed procedures took place from the evaluation of the accumulation of PE MPs in Astyanax spp. juveniles, having demonstrated the efficiency and sensitivity of the method proposed for this purpose. Subsequently, our study provides a methodological alternative that can optimize MPs quantifications in biological samples and reduce the generation of biased or unreliable results.

Study on the influence of operational and management processes of a water reclamation plant since COVID-19 situation

Reusing treated wastewater can effectively alleviate water shortages and water contamination problems but depends on ensuring the safety of the reclaimed water that is produced. The operating and management conditions for water reclamation plants in China have been changed since the outbreak of the COVID-19 epidemic in China at the end of 2019 to prevent emerging viruses being spread through wastewater treatment processes and the reclaimed water that is produced. Removal of pathogens and trace organic compounds (e.g., pharmaceuticals and personal care products and endocrine disrupting chemicals) in a real water reclamation plant after the start of COVID-19 epidemic was studied. Disinfection byproduct formation caused by chlorine being added to meet disinfection requirements was also assessed. The pathogenic microorganism concentrations in effluent were <2 (most probable number)/L, and the removal rates for most trace organic compounds were >80% when advanced treatments were performed using ozone, ultraviolet light, and chlorine doses of 2 mg/L, 20.5 mJ/cm², and 2-3 mg/L, respectively. The main disinfection byproduct produced at a chlorine dose of 2 mg/L and a residence time of 1 h was chloroform (at concentrations <15 μg/L). The results indicated that the water reclamation processes with modified conditions gave high pathogen and trace organic compound removal rates and reasonably well-controlled disinfection byproduct concentrations.

Underestimated health risks: polystyrene micro- and nanoplastics jointly induce intestinal barrier dysfunction by ROS-mediated epithelial cell apoptosis

Background

Micro- and nanoplastic pollution has become a global environmental problem. Nanoplastics in the environment are still hard to detect because of analysis technology limitations. It is believed that when microplastics are found in the environment, more undetected nanoplastics are around. The current “microplastic exposure” is in fact the mixture of micro- and nanoplastic exposures. Therefore, the biological interaction between organisms among different sizes of micro- and nanoplastics should not be neglected.

Results

We measured the biodistribution of three polystyrene (PS) particles (50 nm PS, PS50; 500 nm PS, PS500; 5000 nm PS, PS5000) under single and co-exposure conditions in mice. We explored the underlying mechanisms by investigating the effects on three major components of the intestinal barrier (the mucus layer, tight junctions and the epithelial cells) in four intestine segments (duodenum, jejunum, ileum and colon) of mice. We found that the amounts of both PS500 and PS5000 increased when they were co-exposed with PS50 for 24 h in the mice. These increased amounts were due primarily to the increased permeability in the mouse intestines. We also confirmed there was a combined toxicity of PS50 and PS500 in the mouse intestines. This manifested as the mixture of PS50 and PS500 causing more severe dysfunction of the intestinal barrier than that caused by PS50 or PS500 alone. We found that the combined toxicity of PS micro- and nanoplastics on intestinal barrier dysfunction was caused primarily by reactive oxygen species (ROS)-mediated epithelial cell apoptosis in the mice. These findings were further confirmed by an oxidants or antioxidants pretreatment study. In addition, the combined toxicity of PS micro- and nanoplastics was also found in the mice after a 28-day repeated dose exposure.

Conclusions

There is a combined toxicity of PS50 and PS500 in the mouse intestines, which was caused primarily by ROS-mediated epithelial cell apoptosis in the mice. Considering that most recent studies on PS micro- and nanoplastics have been conducted using a single particle size, the health risks of exposure to PS micro- and nanoplastics on organisms may be underestimated.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12989-021-00414-1.

Detection of Microplastic in Salts Using Terahertz Time-Domain Spectroscopy

We report on a prototypical study of the detection of microplastic embedded in table salts by using terahertz time-domain spectroscopy. In the experiment, high-density polyethylene (HDPE) of sizes from 150 to 400 μm are used as a representative microplastic and mixed with table salts. Analyzing terahertz transmittance with an effective medium model, we extract various optical properties such as refractive index, absorption coefficient, and real/imaginary parts of the dielectric constant of the mixture. Consequently, the optical properties exhibit volume-ratio-dependence in 0.1-0.5 THz regimes. Especially, the refractive index and the real part of the dielectric constant possess monotonic frequency dependence, meaning that the quantities can be relevant indicators for the detection of the microplastic in terms of practical applications. Our work proves that terahertz time-domain spectroscopy can pave a way to recognize microplastic mixed with salts and be expanded for detecting various micro-sized particles.