A critical review on performance indicators for evaluating soil biota and soil health of biochar-amended soils

Improvement of rural soil properties and states by biomass carbon under the concept of sustainability: A research progress

Biomass carbon is a highly aromatic carbonaceous solid obtained by thermochemical reaction of biomass raw materials. It is frequently used in the research and application of soil properties and states improvement. Biomass carbon has abundant porous structure, high specific surface area and surface functional groups. After being applied to the soil, it has a significant impact on manipulating the physichemical properties of the soil, enhancing the microbial environment and remediating soil pollutants, which is conducive to the resource utilization of agricultural wastes and the long-term preservation of the environment. Based on 328 moderately to highly relevant literatures on biomass carbon and rural soil property improvement since 2010, this paper reviewed the contemporary research progress of biomass carbon application in soil property improvements utilizing the concept of sustainable development. In order to provide beneficial illumination for the complete implementation of biomass carbon in improving rural soil properties, this paper primarily evaluated the principle as well as mechanism of promoting sustainable soil properties. It tends to prospect the application and development aspirations of biomass carbon in soil ecological restoration, crop growth, development.

Temperature and moisture mediated changes in chemical and microbial properties of biochars in an Anthrosol

Sequestration of soil carbon is considered as a promising strategy for mitigating climate change. As a source of recalcitrant carbon, biochar has been widely used in agricultural soil as a mean of stabilizing soil organic carbon (SOC). However, limited reports focused on the changes of biochar itself in soil when compared with the bulk SOC after biochar addition. To explore how environmental conditions influence the stability of biochar, isolated straw-derived biochar particles (0.25-2 mm) were embedded in an Anthrosol for 12 months under varied environmental conditions of incubation temperature (15 °C, 25 °C and 35 °C) and moisture (60 % and 150 % of saturated water content). Within the early 1 month of incubation, pH and inorganic nitrogen contents of biochar changed significantly as a function of moisture and temperature (p < 0.01), whereas water extractable organic carbon (WEOC) content was only influenced by moisture content (p < 0.01). The highest temperature (35 °C) and saturated water content (150 %) induced the largest aging response reflected by increases in oxygen-containing surface functional groups of biochar, including C-O-C (51.35 % - 149 %) and N-C-O (65.55 % - 119 %). Pearson correlation and RDA analysis indicated that the chemical properties of biochar contribute more to the carbon-source utilization properties of biochar colonized microbial community within 1 month of incubation, while the bulk soil chemical properties (pH, DOC, MBC and NO₃^-) had a higher contribution until the end of incubation. Moisture rather than temperature was the dominant factor in regulating the functional diversity of biochar colonized microbial community.

Positive and negative effects of nanoscale zero-valent iron-enriched biochar on sulfamethoxazole remediation in contaminated soil

This study prepared surface-modified biochar, including acid washing biochar (HBC) and biochar supported with nanoscale zero-valent iron (nZVI-HBC). The surface-modified biochar was added to sulfamethoxazole (SMX)-contaminated soil with and without earthworms to examine the effects of surface-modified biochar and/or earthworms (Eisenia fetida) on the levels of SMX and its relevant genes (sul1, sul2, and intI1) in the soil. Additionally, the joint toxicity of these exogenous substances on earthworms was investigated. The results showed that although earthworms significantly enhanced the dissipation of SMX in the soils with and without HBC, this effect was not observed in the soil with nZVI-HBC. Among all treatments, nZVI-HBC most effectively accelerated SMX dissipation in the soil, regardless of coexisting earthworms. However, the presence of earthworms significantly increased the total relative abundances of sul1, sul2, and intI1 in the soil. A reasonable explanation for this is the shift in the bacterial community composition rather than the residual level of SMX. When earthworms coexisted, the richness of Proteobacteria evidently increased, which was the main host of the above genes. Both HBC and nZVI-HBC decreased these genes in the soil with earthworms, which was mainly due to the decrease in host genera from Proteobacteria, Actinobacteria, and Gemmatimonadetes. Although there was toxicity of single-surface-modified biochar or SMX on earthworms, the synergistic interaction of surface-modified biochar and SMX resulted in the most serious histopathological changes in earthworms and their highest superoxide dismutase activity.

The effects of biochar and its applications in the microbial remediation of contaminated soil: A review

The amendment of biochar for soil bioremediation can improve soil conditions, influence soil microbial community, and achieve co-application of biochar-microbe to promote the removal of pollutants. This paper summarizes the positive effects of biochar on microorganisms, including acting as a shelter, providing nutrients, and improving soil conditions (soil aggregation, pH, cation exchange capacity (CEC), and enzymatic activity). These effects will cause variations in microbial abundance, activity, and community structure. Biochar can act as an electron mediator to promote electron transfer in the process of microbial degradation. And the application of biochar in soil bioremediation is also introduced. Nevertheless, toxic substances carried by biochar that may threaten microbial community shouldn't be overlooked. With this review, we can better understand biochar's involvement in soil bioremediation, which will help us choose and modify biochar in a targeted manner for the desired purpose in practical applications.

Building a risk matrix for the safety assessment of wood derived biochars

Biochar is recognized as an efficient amendment and soil improver. However, environmental and quality assessments are needed to ensure the sustainability of its use in agriculture. This work considers the biochar's chemical-physical characterization and its potential phyto- and geno-toxicity, assessed with germination and Ames tests, obtaining valuable information for a safe field application. Three biochar types, obtained from gasification at different temperatures of green biomasses from the Tuscan-Emilian Apennines (in Italy), were compared through a broad chemical, physical and biological evaluation. The results obtained showed the relevance of temperature in determining the chemical and morphological properties of biochar, which was shown with several analytical techniques such as the elemental composition, water holding capacity, ash content, but also with FTIR and X-ray spectroscopies. These techniques showed the presence of different relevant surface aliphatic and aromatic groups. The procedures for evaluating the potential toxicity using seeds germination and Ames genotoxicity assay highlights that biochar does not cause detrimental effects when it enters in contact with soil, micro- and macro-organisms, and plants. The genotoxicity test provided a new highlight in evaluating biochar environmental safety.

Influence of addition of two typical activated carbons on fertility properties and mechanical strength of vegetation concrete under freeze-thaw conditions

Under freeze-thaw conditions, the substrates used for ecological protection degrade, which involves decreases in compactness and fertiliser retention ability. As such, our purpose in this study was to use two typical types of activated carbon (AC), wood-based activated carbon (WAC) and coal-based activated carbon (CAC), to enhance the antifrost property of vegetation concrete (VC). We investigated the effects of five different proportions of planting soil weight (0.5 %, 1 %, 2 %, 4 %, and 6 %) mixed in each type of AC to determine their influence on the physical, mechanical, chemical, and biological properties of VC. The VC samples prepared without AC were used as control check (CK). The results showed that AC addition effectively enhanced the nutrient retention and microorganism capacity of VC under freeze-thaw conditions (10 and 60 freeze-thaw cycles). The leaching loss rate of ammonium nitrogen (NH₄⁺-N) decreased to 31.98 % for WAC-6 %-60 from 46.87 % for CK-60, and the microorganism biomass carbon (MBC) increased to 138.54 mg·kg^-1 for WAC-6 %-60 from 103.52 mg·kg^-1 for CK-60. However, we observed some negative effects, including decreases in the cohesion and internal friction angle. In addition, the water holding capacity and matric suction first increased and then decreased as the proportion of AC mixed in the VC increased, with a turning point of approximately 2 %. By comprehensively considering previous VC eco-restoration technology study results, the recommended mixing amount of AC is 1 %-2 %, which would take full advantage of the benefits of AC and ensure that any negative effect of its use falls within an acceptable range. In addition, WAC generally performed better than CAC, but the aging rate of the former was faster than that of the latter according to scanning electron microscopy (SEM) images and dissolved organic carbon (DOC) analysis. From our results, we concluded that incorporating AC into VC improves the suitability of VC when applied in freeze-thaw conditions.

Life-cycle assessment of pyrolysis processes for sustainable production of biochar from agro-residues

Net carbon management of agro-residues has been an important pathway for reducing the environmental burdens of agricultural production. Converting agro-residues into biochar through pyrolysis is a prominent management strategy for achieving carbon neutrality in a circular economy, meeting both environmental and social concerns. Based on the latest studies, this study critically analyzes the life cycle assessment (LCA) of biochar production from different agro-residues and compares typical technologies for biochar production. Although a direct comparison of results is not always feasible due to different functional units and system boundaries, the net carbon sequestration potential of biochar technology is remarkably promising. By pyrolyzing agro-residues, biochar can be effectively produced and customized as: (i) alternative energy source, (ii) soil amendment, and (iii) activated carbon substitution. The combination of life cycle assessment and circular economy modelling is encouraged to achieve greener and sustainable biochar production.

Biochar-microorganism interactions for organic pollutant remediation: Challenges and perspectives

Numerous harmful chemicals are introduced every year in the environment through anthropogenic and geological activities raising global concerns of their ecotoxicological effects and decontamination strategies. Biochar technology has been recognized as an important pillar for recycling of biomass, contributing to the carbon capture and bioenergy industries, and remediation of contaminated soil, sediments and water. This paper aims to critically review the application potential of biochar with a special focus on the synergistic and antagonistic effects on contaminant-degrading microorganisms in single and mixed-contaminated systems. Owing to the high specific surface area, porous structure, and compatible surface chemistry, biochar can support the proliferation and activity of contaminant-degrading microorganisms. A combination of biochar and microorganisms to remove a variety of contaminants has gained popularity in recent years alongside traditional chemical and physical remediation technologies. The microbial compatibility of biochar can be improved by optimizing the surface parameters so that toxic pollutant release is minimized, biofilm formation is encouraged, and microbial populations are enhanced. Biocompatible biochar thus shows potential in the bioremediation of organic contaminants by harboring microbial populations, releasing contaminant-degrading enzymes, and protecting beneficial microorganisms from immediate toxicity of surrounding contaminants. This review recommends that biochar-microorganism co-deployment holds a great potential for the removal of contaminants thereby reducing the risk of organic contaminants to human and environmental health.

Enhancement of soil physical properties and soil water retention with biochar-based soil amendments

The soil physical properties are deteriorating due to changing rainfall patterns and intensities, as well as climate change-induced temperature fluctuations. Pot experiments were carried out to examine the impacts of synthesized soil amendments on soil water retention and plant growth. Soil amendments (biochar, polyacrylamide (PAM), and moringa) were used at different rates (0 (control), 2.1, 4.2, and 8.3 g kg^-1) to improve the physical properties of the soil. As a result of soil amendment application, it was found that the mean weight diameter of soil aggregate increased by 188% during the 8.3 g kg^-1 treatment, forming stable soil particles. Soil water retention improved by up to 128.9% during the 8.3 g kg^-1 treatment, and it was analyzed that it was due to the high surface area of biochar, porosity, and high molecular weight of PAM. Pellet treatment increased all plant growth parameters (height, stem diameter, leaf number, and fresh and dry weight) for both beans and maize. The dry weight of beans (C₃ plant) and maize (C₄ plant) increased by 92.9 and 146.4%, respectively in an 8.3 g kg^-1 pot. The soil physical condition was stabilized by the high carbon content of biochar and the improvement of soil coagulation between PAM and moringa. This had a positive effect on the C₄ plant. The findings of this study indicate that if the soil amendments are properly mixed and applied based, they will improve soil stability and plant productivity.

Biochar-based microbial agent reduces U and Cd accumulation in vegetables and improves rhizosphere microecology

Microbial remediation of heavy metals in soil has been widely studied. However, bioremediation efficiency is limited in practical applications because of nutritional deficiency, low efficiency, and competition with indigenous microorganisms. Herein, we prepared a biochar-based microbial agent (BMA) by immobilizing the microbial agent (MA, containing Bacillus subtilis, Bacillus cereus, and Citrobacter sp.) on biochar for the remediation of U and Cd in soil. The results showed that BMA increased soil organic matter, cation exchange capacity, and fluorescein diacetate hydrolysis activity and dehydrogenase activity by 58.7%, 38.2%, 42.9%, and 51.1%. The availability of U and Cd were significantly decreased by 67.4% and 54.2% in BMA amended soil, thereby reducing their accumulation in vegetables. BMA greatly promoted vegetable growth. Additionally, BMA significantly altered the structure and function of rhizosphere soil microbial communities. Coincidently, more abundant ecologically beneficial bacteria like Nitrospira, Nitrosomonas, Lysobacter, and Bacillus were observed, whereas plant pathogenic fungi like Fusarium and Alternaria reduced in BMA amended soil. The network analysis revealed that BMA amendment increased the tightness and complexity of microbial communities. Importantly, the compatibility of niches and microbial species within co-occurrence network was enhanced after BMA addition. These findings provide a promising strategy for suppressing heavy metal accumulation in vegetables and promoting their growth.

Toxicological effect assessment of aged biochar on Escherichia coli

Biochar (BC) is a biomass material that has a wide range of applications on the remediating heavy metals. In this experiment, we prepared BC (300 ºC, 500 ºC, and 700 ºC) and applied them to adsorb lead ions (Pb²⁺) to simulate BC treatment of Pb²⁺-contaminated soil. The retention capacity of BC for heavy metals was altered by means of bacterial culture, and the heavy metals released by BC can have toxicological effects on bacteria. This approach was used to assess the effects of long-term application of BC in heavily contaminated land with heavy metals on soil microorganisms. The results show that Escherichia coli survived in the medium containing lower doses of Pb²⁺-aged BC prepared at 300 ºC and 500 ºC (25 mg/L and 50 mg/L), depending on its ability of tolerating a certain amount of Pb²⁺. The addition of 100 mg/L Pb²⁺-aged BC prepared at 700 ºC not only significantly inhibited the growth of E. coli, but also promoted the release of citric acid from E. coli, which in turn triggered BC releasing more Pb²⁺. It is hoped that this will provide foundation to support the long-term application of BC in the remediation of heavy metal contaminated soils.

Biochar application with reduced chemical fertilizers improves soil pore structure and rice productivity

Biochar is an efficient amendment to improve soil quality and crop productivity, but the potential of biochar as a substitute for chemical fertilizers is still unknown. Here we conducted a 6-year field experiment to investigate how partial substitution of biochar to NPK fertilizers affect soil quality and rice yield in the northeast of China. The experiment included three treatments: Control (B0: NPK fertilizers only: 240 kg N ha^-1, 52 kg P ha^-1, and 100 kg K ha^-1); Low-input biochar (B1.5: 95% N, 89% P, 75% K + 1.5 t biochar ha^-1 year^-1); and High-input biochar (B3.0: 90% N, 78% P, 50% K + 3.0 t biochar ha^-1 year^-1). The amounts of NPK application in the biochar treatments were determined according to an equivalent method. We evaluated the soil pore structure characteristics via a CT technology, and investigated soil nutrients, plant biomass, root growth, and grain yields. The results showed that, after the 6-year application, the soil pore structure and rice productivity of B1.5 were significantly improved in compared to those of B0 and B3.0. B1.5 had similar soil available NPK contents, but 6.6% higher rice yield as compared to B0, because of increased root length density (33.2%) and aboveground biomass (10.2%). B1.5 also increased soil macroporosity (>100 μm) (141.4%), fraction dimension (8.4%), and pore connectivity (16.6%) in compared with those of B0. However, B3.0 showed the lowest rice yield due to lower soil available N content (19.2%), macroporosity (28.5%), fraction dimension (5.5%), and pore connectivity (85.3%) than B0. This study demonstrated that a moderate NPK fertilizer replacement by biochar could be an effective practice that improves soil quality, increases rice growth and yield, and reduces the input of chemical fertilizers for rice production.

Toxicity of biochar influenced by aging time and environmental factors

The extensive application of biochar has drawn more attentions on its potential risk to aquatic organisms. However, the influence of environmental factors (i.e. pH, HA, SDBS and aging time) after they discharged into environment on their toxicity have not been clarified. Here, we synthesized biochar with local pine needles via pyrolysis, and then aged in different media. Followed, the toxicity of pristine and aged biochar was checked with Scenedesmus obliquus (S. obliquus). Our investigation showed that the toxicity of biochar was mitigated when aged in different pH levels or SDBS, while it was opposite in the presence of HA. The increment of pH decreased the toxicity of both the pristine and the aged biochar, while the presence of HA did same impact on the pristine biochar. The presence of SDBS decreased the toxicity of pristine biochar but increased that of aged biochar. Meanwhile, we showed these environmental factors (pH, HA, SDBS and aging time) influenced the biochar toxicity may be due to the adjustment of the aggregation and adhesion of biochar on cell surfaces or the intracellular oxidative stress. Further, the PFRs contained in biochar did influence the toxicity, along with the physicochemical properties of biochar (i.e. carbon structure, functional group or surface charge). Our results aimed to reflect the toxicity profile of biochar in the natural aquatic environment, without misunderstanding of potential ecological risk of biochar in the future application.

Tannery waste-derived biochar as a carrier of micronutrients essential to plants

The leather tannery industry generates about 33 Mt/year of solid waste with different properties, turning its management into a challenge. One of the valorization methods of tannery wastes is the production of biochar by pyrolysis of leather scratches. Biochar's sorption properties and its high nitrogen content (10%) make it suitable for its application as a soil conditioner or carrier of microelements for fertilizers. The paper presents an innovative spray method to enrich biochar with cationic micronutrients: Cu, Mn, Zn. Enriched biochar contained 1095 mg/kg Cu(II), 1334 mg/kg Mn(II) and 1205 mg/kg Zn(II). The high bioavailability of nutrients and the effectiveness of the new fertilizer were demonstrated in extraction in vitro tests - the analysis of leachability of elements to water and bioavailability of micro-nutrients. The functional properties of enriched biochar were examined in vivo (germination, pot) tests. A high biomass increase (approximately 10%) was observed compared to the group fertilized with a commercial product. The proposed solution benefits the environment in that it is made from alternative resources from which innovative fertilizers are produced according to the circular economy concept.

Effects of biochar on water quality and rice productivity under straw returning condition in a rice-wheat rotation region

Straw returning is helpful to improve soil properties and realize the reutilization of agricultural waste. However, wheat straw returning may result in paddy water quality deterioration in rice-wheat rotation regions. This study conducted pot experiments of rice planting with different biochar application rates (0, 5, 20, and 40 t/hm²) under wheat straw returning conditions. The purposes are to investigate the applicability of biochar mixed with wheat straw returning to paddy fields and explore the effects of biochar on water quality, leaching losses of nitrogen (N) and phosphorus (P), and rice yield components. Results indicated that total straw returning reduced the water quality in paddy surface water and aggravated the leaching losses of N and P. Fortunately, the biochar application improved the negative effects caused by straw returning. 40 t/hm² biochar mixed with straw returning significantly reduced the concentrations of COD and N in paddy surface water and N leaching loss than straw returning treatment (ST), decreased by 48.33%, 41.01%, and 45.73%, respectively. Meanwhile, applying biochar at a rate of 20 t/hm² with straw returning is suitable to control the diffusion of P. In addition, the ST treatment had no significant effect on rice yield, while the proper application rate of biochar under straw returning condition can improve rice yield and promote N utilization. 20 t/hm² biochar treatment is more effective to improving rice yield (16.89%) and N use efficiency (NUE) (10.14%). These findings can provide a new method to solve the negative effects of total straw returning on the water environment and rice growth and guide the utilization of straw resources in the rice-wheat rotation regions.

Exogenous application and interaction of biochar with environmental factors for improving functional diversity of rhizosphere's microbial community and health

The usage of fertilizer with high nitrogen content in many countries, as well as its enormous surplus, has a negative impact on the soil ecological environment in agricultural system. This consumption of nitrogen fertilizer can be minimized by applying biochar to maintain the sufficient supply of nitrogen as nutrient to the near-root zone. This study investigated the effects of various amounts of biochar application (450, 900, 1350, and 1800 kg/hm²) and reduction of nitrogen fertilizer amount (10, 15, 20, and 25%) on the nutrients and microorganism community structure in rhizosphere growing tobacco plant. The microorganism community was found essential in improving nitrogen retention. Compared with conventional treatment, an application of biochar in rhizosphere soil increased the content of soil available phosphorus, organic matter and total nitrogen by 21.47%, 26.34%, and 9.52%, respectively. It also increased the abundance of microorganisms that are capable of degrading and utilizing organic matter and cellulose, such as Actinobacteria and Acidobacteria. The relative abundance of Chloroflexi was also increased by 49.67-78.61%, and the Acidobacteria increased by 14.79-39.13%. Overall, the application of biochar with reduced nitrogen fertilizer amount can regulate the rhizosphere microecological environment of tobacco plants and their microbial population structure, thereby promoting soil health for tobacco plant growth while reducing soil acidification and environmental pollution caused by excessive nitrogen fertilizer.

Nanobiochar-rhizosphere interactions: Implications for the remediation of heavy-metal contaminated soils

Soil heavy metal contamination has increasingly become a serious environmental issue globally, nearing crisis proportions. There is an urgent need to find environmentally friendly materials to remediate heavy-metal contaminated soils. With the continuing maturation of research on using biochar (BC) for the remediation of contaminated soil, nano-biochar (nano-BC), which is an important fraction of BC, has gradually attracted increasing attention. Compared with BC, nano-BC has unique and useful properties for soil remediation, including a high specific surface area and hydrodynamic dispersivity. The efficacy of nano-BC for immobilization of non-degradable heavy-metal contaminants in soil systems, however, is strongly affected by plant rhizosphere processes, and there is very little known about the role that nano-BC play in these processes. The rhizosphere represents a dynamically complex soil environment, which, although having a small thickness, drives potentially large materials fluxes into and out of plants, notably agricultural foodstuffs, via large diffusive gradients. This article provides a critical review of over 140 peer-reviewed papers regarding nano-BC-rhizosphere interactions and the implications for the remediation of heavy-metal contaminated soils. We conclude that, when using nano-BC to remediate heavy metal-contaminated soil, the relationship between nano-BC and rhizosphere needs to be considered. Moreover, the challenges to extending our knowledge regarding the environmental risk of using nano-BC for remediation, as well as further research needs, are identified.

Sustainable biochar: A facile strategy for soil and environmental restoration, energy generation, mitigation of global climate change and circular bioeconomy

The increasing agro-demands with the burgeoning population lead to the accumulation of lignocellulosic residues. The practice of burning agri-residues has consequences viz. Release of soot and smoke, nutrient depletion, loss of soil microbial diversity, air pollution and hazardous effects on human health. The utilization of agricultural waste as biomass to synthesize biochar and biofuels, is the pertinent approach for attaining sustainable development goals. Biochar contributes in the improvement of soil properties, carbon sequestration, reducing greenhouse gases (GHG) emission, removal of organic and heavy metal pollutants, production of biofuels, synthesis of useful chemicals and building cementitious materials. The biochar characteristics including surface area, porosity and functional groups vary with the type of biomass consumed in pyrolysis and the control of parameters during the process. The major adsorption mechanisms of biochar involve physical-adsorption, ion-exchange interactions, electrostatic attraction, surface complexation and precipitation. The recent trend of engineered biochar can enhance its surface properties, pH buffering capacity and presence of desired functional groups. This review focuses on the contribution of biochar in attaining sustainable development goals. Hence, it provides a thorough understanding of biochar's importance in enhancing soil productivity, bioremediation of environmental pollutants, carbon negative concretes, mitigation of climate change and generation of bioenergy that amplifies circular bioeconomy, and concomitantly facilitates the fulfilment of the United Nation Sustainable Development Goals. The application of biochar as seen is primarily targeting four important SDGs including clean water and sanitation (SGD6), affordable and clean energy (SDG7), responsible consumption and production (SDG12) and climate action (SDG13).

Addition of walnut shells biochar to alkaline arable soil caused contradictory effects on CO2 and N2O emissions, nutrients availability, and enzymes activity

Mitigation of greenhouse gas (GHGs) emissions and improving soil health using biochar (BC) shall help achieving the UN-Sustainable Development Goals. The impacts of walnut shells biochar (WSB) pyrolyzed at different temperatures on CO₂ and N₂O emission and soil health have not been yet sufficiently explored. We investigated the effects of addition of WSB pyrolyzed at either 300 °C (WSB-300), 450 °C (WSB-450), or at 600 °C (WSB-600) to alkaline soil on CO₂ and N₂O emissions, nutrients availability, and soil enzymes activities in a 120-day incubation experiment. Cumulative N₂O emissions were reduced significantly as compared to the control, by 64.9%, 50.6%, and 36.4% after WSB-600, WSB-450 and WSB-300, respectively. However, the cumulative CO₂ emissions increased, over the control, as follows: WSB-600 (50.7%), WSB-450 (68.6%), and WSB-300 (73.4%). Biochar addition, particularly WSB-600 significantly increased soil pH (from 8.1 to 8.34), soil organic C (SOC; from 8.6 to 22.3 g kg^-1), available P (from 21.0 to 60.5 mg kg^-1), and K (181.0-480.5 mg kg^-1), and activities of urease, alkaline phosphatase, and invertase. However, an opposite pattern was observed with NH₄⁺, NO₃^-, total N and β-glucosidase activity after WSB application. The WBS produced from high temperature pyrolysis can be used for N₂O emissions mitigation and improvement of soil pH, SOC, available P and K, and activities of urease, alkaline, phosphatase. However, WBS produced from low temperature pyrolysis can be used to promote N availability and β-glucosidase; however, these findings should be verified under different field and climatic conditions.

Biochar considerably increases the easily available water and nutrient content in low-organic soils amended with compost and manure

The soil hydraulic properties of two low-organic soils (Fluvisol; Regosol) were investigated following their amendment with biochar alone or in combination with manure, compost and co-composted biochar. Self-irrigating boxes containing the soil and amendment combinations were purposed with a battery of soil moisture sensors as well as soil porewater sampling devices. Static sampling determined bulk density, porosity and derived soil water retention curves. The aim of this study was to identify the most advantageous amendment combinations to enhance soil water retention whilst simultaneously avoiding excessive nutrient leaching arising, primarily, from manure application. Biochar significantly decreased bulk density and increased total porosity when compared to compost in the Fluvisol, whereas manure affected the greatest changes in the Regosol. All of the tested amendments adjusted the shape or extent of the soil water retention curves, but biochar addition resulted in the greatest increase (⁓50%) in easily available water content (for plants) in both soils, when compared to the control. Saturated hydraulic conductivity was, however, not changed by any of the amendments which reflects a lack of influence on infiltration. An enhancement in nutrient retention occurred in some of the soil amendment configurations, such as for co-composted biochar at 2% dosage and 5% manure-biochar mixture, as revealed by porewater analysis. In summary, the application of biochar with and without additional compost and manure can enhance soil water retention in low-organic soils whilst maintaining or enhancing nutrient retention. Such finding supports the application of mixed organic amendments to low-organic (and therefore drought-prone) arable soils.

Co-composted biochar derived from rice straw and sugarcane bagasse improved soil properties, carbon balance, and zucchini growth in a sandy soil: A trial for enhancing the health of low fertile arid soils

Sustainable management of low fertile arid soils using carbon-rich organic amendments such as biochar and compost is of great concern from both agricultural and environmental points of view. The impact of pyrolysis, composting, and co-composting processes of different feedstocks on carbon loss and emissions, soil properties, and plant growth in arid soils with low organic matter content has not been sufficiently explored yet. Consequently, the aim of this work was to 1) investigate the effects of the pyrolysis, composting, and co-composting processes on the properties of the produced biochar, compost, and co-composted biochar from rice straw (RS) and sugarcane bagasse (SB), and 2) examine the impact of addition of RB biochar (RSB), SB biochar (SBB), RS compost (RSC), SB compost (SBC), co-composted RS biochar (RSCB), and co-composted SB biochar (SBCB) at an application dose of 10 ton/hectare on soil properties, carbon emission, and growth of zucchini (Cucurbita pepo) in a sandy arid soil. Carbon loss (kg C kg^-1 feedstock) was significantly (P < 0.05) lower during the preparation of the compost (90.36 in RSC, 220.00 in SBC) and co-composted-biochar (146.35 in RSCB, 125.20 in SBCB) than in biochar (176.5 in RSB, 305.6 in SBB). The C/N ratios of the compost and co-composted biochar (11-28.5) were narrower than the corresponding values of biochars (48-90). All amendments increased significantly soil organic carbon content (2.5 in RSC to 5.5 g kg^-1 in RSCB), as compared to the non-amended control (1.2 g kg^-1). All amendments, particularly RSCB, increased significantly (P < 0.05) the zucchini seed vigor index, dry weight, total chlorophyll content, and root and shoot length, as compared to the control. Moreover, RSCB was the only amendment that showed a positive soil carbon balance. The modified integrated two-way ecological model data also indicated that the co-composted biochar, particularly RSCB, is a promising amendment to improve soil quality and plant growth in sandy arid soils. However, those data should be verified under field conditions.

Aging features of metal(loid)s in biochar-amended soil: Effects of biochar type and aging method

Soil contamination with toxic metals and metalloids has become a major threat to global food security. Among various immobilization agents that can stabilize toxic metal(loid)s effectively, biochar is promising due to its ability to restore soil health. Yet the aging characteristics of biochar following its amendment in soil remain poorly explored. Therefore, this study used standard biochars to depict their aging effects on remediation of metal(loid)-contaminated soil. A total of 2304 observations were made, including 6 biochar feedstocks (rice husk, soft wood, oilseed rape straw, miscanthus straw, sewage sludge and wheat straw), 2 pyrolysis temperatures (550 °C, 700 °C), 8 metal(loid)s (Mn, Ni, Cu, Zn, As, Cd, Sb, Pb), 4 aging methods (natural aging, freeze-thaw cycling, wet-dry cycling, chemical oxidation with H₂O₂), and 6 sampling intervals. Sewage sludge biochars exhibited the highest resistance to both artificial and natural aging, which may be related to the abundant oxygen-containing functional groups that favor metal complexation, and poorly-developed pore structures that limit the access of natural aging forces. A distinct relationship between ash and temperature was observed, where for high-ash biochars, an increase in pyrolysis temperature indicated lower resistance to aging, while for low-ash biochars, elevated pyrolysis temperature led to higher resistance. The aging behaviors of Cu and Sb were quite similar, which were both highly susceptible to chemical oxidation-induced dissolved organic carbon (DOC) release. Wet-dry cycling and freeze-thaw cycling revealed aging patterns that were similar to those of naturally aged soils as confirmed by cluster analysis. Lab aging data were then compared with existing biochar field aging results. Contrasting long-term immobilization performances were found in different studies, which were attributed to various causes associated with both biochar property and climate. The results of this study provide fresh insights into the long-term risks in the management of metal(loid)-contaminated agricultural soils.

Phytoremediation of potentially toxic elements (PTEs) contaminated soils using alfalfa (Medicago sativa L.): A comprehensive review

Soil contamination with potentially toxic elements (PTEs) is an increasing environmental problem, posing serious threats to the living organisms. Phytoremediation is a sustainable and highly accepted technology for remediation of PTE-contaminated soils. Alfalfa has been widely adopted for the phytoremediation of PTE-contaminated soils due to its large biomass productivity, high PTE tolerance, and strong capacity to take up PTEs. However, there are still no literature reviews systematically summarized the potential of alfalfa in the phytoremediation. Therefore, we review the available literatures that present its PTE uptake, phytotoxicity, tolerance mechanisms, and aided techniques improving the phytoremediation efficiency. In this review, alfalfa shows high amounts of PTEs accumulation, especially in their root tissue. Meanwhile, the inner mechanisms of PTE tolerance and accumulation in alfalfa are discussed including: (i) the activation of antioxidant enzyme system, (ii) subcellular localization, (iii) production of glutathione, phytochelatins, and proline, and (iv) regulation of gene expression. Indeed, excessive PTE can overcome the defense system, which causes oxidative damage in alfalfa plants, thereby inhibiting growth and physiological processes and weakening the ability of PTE uptake. Till now, several approaches have been developed to improve the tolerance and/or accumulation of PTE in alfalfa plants as follows: (i) selection of PTE tolerant cultivars, (ii) applying plant growth regulators, (iii) addition of chelating agents, fertilizer, and biochar materials, and (iv) inoculation of soil microbes. Finally, we indicate that the selection of PTE-tolerant cultivars along with inoculation of soil microbes may be an efficient and eco-friendly strategy of the soil PTE phytoremediation.

Preparation of ball-milled phosphorus-loaded biochar and its highly effective remediation for Cd- and Pb-contaminated alkaline soil

Pyrolytic biochar is a good material for remediating soils contaminated with heavy metals; however, it exhibits strong alkalinity, which easily causes soil alkalization and fertility reduction. Herein, a series of novel biochar materials (BPBCs) were prepared by combined ball milling and phosphorus (P)-loading. The optimized BPBC were fabricated in the basis of Cd and Pb adsorption capacities of the biochar, with pyrolysis at 700 °C, ball milling for 12 h and the addition of 5% red P (BPBC700). Ball milling could effectively grind pristine biochar into submicron particles and nanoscale P particles could be uniformly loaded on BPBC700. Moreover, the oxidative conversion of red P into phosphorus oxides, phosphoric acid and (hydro)phosphates was promoted due to reactions with the carbonates, alkaline minerals and O-containing functional groups of biochar. These reactions also decreased the biochar and soil pH to nearly neutral by acid-base neutralization. Pot experiments showed that BPBC700 had better effects than the pristine or ball-milled biochar in improving soil properties (e.g., cation exchange capacity and organic carbon), increasing the concentrations of soil nutrients (e.g., N and P), promoting alkaline phosphatase, catalase and urease activities, decreasing soil mobility and plant accumulation of Cd and Pb, and alleviating Cd and Pb stress on maize plants. Thus, BPBC is a promising and ecofriendly amendment to enhance its adsorption ability on Cd and Pb, soil quality and plant productivity in contaminated soil.

Sorption, separation and recycling of ammonium in agricultural soils: A viable application for magnetic biochar?

Recent research on the magnetisation of biochar, a carbon-based material that can be used as a sorbent, has opened novel opportunities in the field of environmental remediation, as incorporating magnetic particles into biochar can simplify subsequent separation. This could offer a sustainable circular economy-based solution in two areas of waste management; firstly, pyrolysis of agricultural waste for magnetic biochar synthesis could reduce greenhouse gas emissions derived from traditional agricultural waste processing, such as landfill and incineration, while secondly, application of magnetic biochar to remove excess nitrogen from soils (made possible through magnetic separation) could provide opportunities for this pollutant to be used as a recycled fertiliser. While sorption of pollutants by magnetic biochar has been researched in wastewater, few studies have investigated magnetic biochar use in polluted soils. Nitrogen pollution (e.g. NH₄⁺), stemming from agricultural fertiliser management, is a major environmental and economic issue that could be significantly reduced before losses from soils occur. This review demonstrates that the use of magnetic biochar tailored to NH₄⁺ adsorption has potential to remove (and recycle for reuse) excess nitrogen from soils. Analysis of research into recovery of NH₄⁺ by sorption/desorption, biochar magnetisation and biochar-soil interactions, suggests that this is a promising application, but a more cohesive, interdisciplinary approach is called for to elucidate its feasibility. Furthermore, research shows variable impacts of biochar upon soil chemistry and biology, such as pH and microbial diversity. Considering wide concerns surrounding global biodiversity depletion, a more comprehensive understanding of biochar-soil dynamics is required to protect and support soil ecosystems. Finally, addressing research gaps, such as optimisation and scaling-up of magnetic biochar synthesis, would benefit from systems thinking approaches, ensuring the many complex considerations across science, industry, policy and economics are connected by circular-economy principles.

The composition, energy, and carbon stability characteristics of biochars derived from thermo-conversion of biomass in air-limitation, CO2, and N2 at different temperatures

This study systemically investigated the characteristics of biochars derived from thermo-conversion of pine sawdust and wheat straw in air-limitation, CO2, and N2 atmospheres at the temperatures of 300-750 °C. Meanwhile, their energy and C stability parameters were also evaluated here. The results showed that biochar produced in air-limitation had less yield, fixed C and bulk C, as well as more volatile matter and inorganic elements than that produced in CO2 and N2. Biochars derived from thermo-conversion of pine sawdust in CO2 and N2 at 450-750 °C had the greatest energy densification ratios (EDR) (range: 1.40-1.61), because pine sawdust contained more lignin than wheat straw, and the thermo-conversion of lignin in N2 and CO2 at 450-750 °C benefited for the formation of fixed C. Recalcitrance potential (R50) results showed that the biochars produced in CO2 and N2 at 600-750 °C had the highest carbon stability (R50: 0.54-0.64) for given biomass, owing to the thermo-conversion of biomass in CO2 and N2 at 600-750 °C preferring to form the organic C with high aromaticity and low polarity. Nonetheless, thermo-conversion of biomass in CO2 and N2 at 300 °C presented the greatest C sequestration potential, owing to high biochar yields under these conditions. Generally, the temperature-variability for the composition, EDR, and C sequestration potential followed the order: air-limitation > CO2 > N2, whereas carbon stability presented an opposite order. Our results contributed to selecting the appropriate atmosphere to optimize the properties and performances of biochars.

Mixed bacteria-loaded biochar for the immobilization of arsenic, lead, and cadmium in a polluted soil system: Effects and mechanisms

The present study explored the immobilization of mixed bacteria-loaded biochar on As, Pb, and Cd was explored. Physisorption and sodium alginate encapsulation were used to synthesize two kinds of mixed bacteria-loaded biochars, referred to as BCM and BCB. The observations of Scanning electron microscope, X-ray diffraction, and Fourier transform infrared spectroscopy distinctly demonstrated the colonization of mixed bacteria on biochar. Besides, the addition of BCM and BCB could increase soil pH with increasing incubation time. The residual fraction of heavy metals and soil dehydrogenase activities were also enhanced after 28 days of incubation. Pb was mainly immobilized by co-precipitation, which meant that Pb could be converted into a consistent crystalline form such as Pb₅(PO₄)₃OH. The X-ray photoelectron spectroscopy and X-ray diffraction analyses of materials identified the formation of Ca₂As₂O₇ and the presence of oxidation from trivalent arsenic to pentavalent arsenic. Cd was adsorbed by forming precipitations (CdCO₃) and exchanging ions with the BCM and BCB. Synergistic reactions between anions and cations also contributed to the immobilization of heavy metals, such as the formation of PbAs₂O₆ and Cd₃(AsO₄)₂. These results confirmed that mixed bacteria-loaded biochar was a feasible technology for the remediation of heavy metals contamination in site soils.

Biochar and nitrogen fertilizer co-application changed SOC content and fraction composition in Huang-Huai-Hai plain, China

Biochar can significantly enhance soil organic carbon (SOC) and crop yield, and it is therefore the preferred material for soil improvement in medium-low yield fields. In this study, a field experiment was designed to explore the impacts of biochar application on SOC content and fraction composition. Results indicated that incorporation of biochar into soil increased the SOC content by 26.9%-65.3% in the surface layer (0-10 cm) and 30.3%-63.0% in the subsurface layer (10-20 cm) of soil, while water-soluble organic carbon (WSOC) of the two layers was increased by 2.2-40.0% and 2.3-39.8%, respectively. Microbial biomass carbon decreased under conventional nitrogen treatments and increased with biochar addition under increased nitrogen application. The C:N value increased with biochar application, while the water-soluble C:N value of soil applied with 30 t ha^-1 biochar was lower than that of soil applied with 15 t ha^-1 biochar, both in the two tested soil layers. Wheat yield is evidently correlated with SOC, with the correlation coefficients of 0.919 and 0.952 in the surface and subsurface soil layers (P < 0.01), respectively. Particularly, increasing fulvic and humic acid-like compounds of WSOC promoted the bioavailability of nutrient elements, thereby increasing the crop yields. Therefore, biochar application is an effective means to fertilize middle-low yield soils through increasing SOC sequestration and nutrient reserves, or adjusting soil C:N value to a proper range, thereby reducing nutrient loss and increasing wheat yield.

Combined effects of biochar and fertilizer applications on yield: A review and meta-analysis

The use of biochar is changing, and the combined application of biochar with fertilizer is increasingly gaining acceptance. However, the yield gains results reported in the existing literature through the co-application of fertilizer with biochar are conflicting. To resolve this, we utilized a meta-analysis of 627 paired data points extracted from 57 published articles to assess the performance of the co-application of biochar and fertilizers on crop yield compared with the corresponding controls. We also studied the impact of biochar characteristics, experimental conditions, and soil properties on crop yield. Our analysis showed that individually, biochar and inorganic fertilizer increased crop yield by 25.3% ± 3.2 (Bootstrap CI 95%) and 21.9% ± 4.4, respectively. The co-application of biochar with both inorganic and organic fertilizers increased crop yield by 179.6% ± 18.7, however, this data needs to be treated with caution due to the limited dataset. The highest yield increase was observed with amendments to very acidic soils (pH ≤5), but the benefits of biochar were not affected by the rate and the time after the application. In addition, the effects of biochar are enhanced when it is produced at 401-500 °C with a C:N ratio of 31-100. Our results suggest that the co-application of biochar with either inorganic and/or organic fertilizers in acidic soils increase crop productivity compared to amendment with either fertilizer or biochar. Our meta-analysis supports the utilization of biochar to enhance the efficiency and profitability of fertilizers.

Effect of acid modified tea-waste biochar on crop productivity of red onion (Allium cepa L.)

Biochar has widely been utilized as an agricultural soil amendment owing to its enhanced surface properties and cost-effectiveness. In the present work, the influence of tea waste biochar (TWBC) upon acid modification on Allium cepa L. (red onion) growth has been studied. Its effect as a soil amendment has also been studied by assessing the nutrient retention, microbial population growth and immobilization of potentially toxic metal ions. A greenhouse experiment was carried out by applying different biochar (BC) ratios (2% and 5% w/w) to soil as the growth media for onion plants. A 2.4 times (2.4 × ) reduction of phosphate from leaching was observed upon BC application at a ratio of 2% than that of 5%. Moreover, red onion plants that grew in the BC-fertilizer amended soil at a 2% ratio showed higher growth compared to that of 5%. A ∼1.3 × and ∼1.2 × increment of total dry weight was observed upon amendment of soil fertilizer system with nitric and sulfuric acid-modified TWBC, respectively. An analysis of the potentially toxic metal ion uptake by the respective plant parts showed that lead uptake by the roots of red onion was ∼8.3 × less in BC amended soil compared to that in contaminated soil. Thus, acid-modified TWBC can be considered a potential soil amendment for an enhanced red onion growth. Employing TWBC as a soil amendment in tropical countries, where tea-waste is in abundance, will boost sustainable agriculture.

Effects of different feedstocks-based biochar on soil remediation: A review

As a promising amendment, biochar has excellent characteristics and can be used as a remediation agent for diverse types of soil pollution. Biochar is mostly made from agricultural wastes, forestry wastes, and biosolids (eg, sewage sludge), but not all the biochar has the same performance in the improvement of soil quality. There is a lack of guidelines devoted to the selection of biochar to be used for different types of soil pollution, and this can undermine the remediation efficiency. To shed light on this sensitive issue, this review focus on the following aspects, (i) how feedstocks affect biochar properties, (ii) the effects of biochar on heavy metals and organic pollutants in soil, and (iii) the impact on greenhouse gas emissions from soil. Generally, the biochars produced from crop residue and woody biomass which are composed of lignin, cellulose, and hemicellulose are more suitable for organic pollution remediation and greenhouse gas emission reduction, while biochar with high ash content are more suitable for cationic organic pollutant and heavy metal pollution (manure and sludge, etc.). Additionally, the effect of biochar on soil microorganisms shows that gram-negative bacteria in soil tend to use WB biochar with high lignin content, while biochar from OW (rich in P, K, Mg, and other nutrients) is more able to promote enzyme activity. Finally, our recommendations on feedstocks selection are presented in the form of a flow diagram, which is precisely intended to be used as a support for decisions on the crucial proportioning conditions to be selected for the preparation of biochar having specific properties and to maximize its efficiency in pollution control.

How does biochar aging affect NH3 volatilization and GHGs emissions from agricultural soils?

Biochar has been considered as a potential tool to mitigate soil ammonia (NH₃) volatilization and greenhouse gases (GHGs) emissions in recent years. However, the aging effect of biochar on soils remains elusive, which introduces uncertainty on the effectiveness of biochar to mitigate global warming in a long term. Here, a meta-analysis of 22 published works of literature with 217 observations was conducted to systematically explore the aging effect of biochar on soil NH₃ and GHGs emissions. The results show that, in comparison with the fresh biochar, the aging makes biochar more effective to decrease soil NH₃ volatilization by 7% and less risk to contribute CH₄ emissions by 11%. However, the mitigation effect of biochar on soil N₂O emissions is decreased by 15% due to aging. Additionally, aging leads to a promotion effect on soil CO₂ emissions by 25% than fresh biochar. Our findings suggest that along with aging, particularly the effect of artificial aging, biochar could further benefit the alleviation of soil NH₃ volatilization, whereas its potential role to mitigate global warming may decrease. This study provides a systematic assessment of the aging effect of biochar to mitigate soil NH₃ and GHGs, which can provide a scientific basis for the sustainable green development of biochar application.

An assessment of integrated amendments of biochar and soil replacement on the phytotoxicity of metal(loid)s in rotated radish-soya bean-amaranth in a mining acidy soil

Knowledge is insufficient on feasible remediation techniques to agricultural soils contaminated by multiple heavy metal(loid)s with elevated concentrations and extreme acidy from acid mine drainages (AMD). We aimed to elucidate the effect of integrated biochar (BC) and soil replacement on improving the mining soil properties and then alleviating the phytotoxicity of As, Pb, Cd, Cu, and Zn on radish (Raphanus sativus L.)-soya bean (Glycine max Merr.) -amaranth (Amaranthus tricolor L.) rotation and the potential risk of crops to human health. Biochar and soil replacement showed outstanding effects on improving soil properties by increasing soil pH values, reducing available metal(loid)s, and enhancing the activity of catalase, urease and acid phosphatase. Also, the integrated technique regulated the physiological disorders of crops caused by metal(loid)s, specifically increasing chlorophyll content and reducing malondialdehyde (MDA) in the three crops, and reducing the content of metal(loid)s in edible parts of plants. The combination of biochar and soil replacement exhibited better remediation effect than the single application of biochar or soil replacement, which played different roles in remediating mining farmland. Biochar exhibited efficacy in soil pH amelioration, metal stabilization and soil enzyme activity enhancement, while soil replacement alleviated metal(loid)s stress through the dilution effect. Among the 8 treatments, only biochar combined with 35% (S35BC) and 50% (S50BC) of replaced soil could achieve the safe production of the three crops under the three-season crop rotation.

How Biochar Affects Nitrogen Assimilation and Dynamics by Interacting Soil and Plant Enzymatic Activities: Quantitative Assessment of 2 Years Potted Study in a Rapeseed-Soil System

The amendment of biochar has been proposed to improve soil fertility and crop yield. However, consolidated information lacks explaining the role of biochar on soil and plant enzymatic activities involved in nutrients cycling in soil and accumulation in plants improving utilization of applied inorganic fertilizer and crop growth. In the current study, we evaluated the integral effects of biochar levels (B0:0, B15:15, B3:30, and B60:60 t ha^-1) and nitrogen fertilizer levels (N0:0, N75:75, N225:225, and N450:450 kg ha^-1) on soil physicochemical properties, enzymatic activities, nitrogen use efficiency (NUE) and grain yield of rapeseed for 2 years in the pots during 2020 and 2021. The findings revealed that compared to control (B0 + N0), a combination of B30 + N450 increased soil urease activity by 73 and 75%, and B60 + N450 increased activities of soil catalase by 17 and 16%, and B60 + N225 increased alkaline phosphatase by 17 and 19%, respectively, in the first and second year. Moreover, a single application of high nitrogen at 450 kg ha^-1 reduced the activities of plant nitrogen metabolism-related enzymes, however; the integration of biochar at 30 t ha^-1 compensated the high nitrogen toxicity and improved the activities of nitrate reductase (NR), nitrite reductase NIR, glutamate synthase (GS) and glutamine synthetase (GOGAT) at seedling stage (SS) and flowering stage (FS) in both years. The integration of biochar at 30 t ha^-1 with nitrogen at 450 kg ha^-1 induced synergetic effects on rapeseed growth through sorption of excessive nitrogen in soil and significantly improved the plant height up to 11 and 18%, pods plant^-1 39 and 32% and grain yield plant^-1 54 and 64%, respectively, during the first and second year. Moreover, biochar at 15 t ha^-1 along with nitrogen at 225 kg ha^-1 resulted in the highest NUE of 29% in both years suggesting that biochar can also offset the deficiency of lower nitrogen. This study highlighted the ameliorative effect of biochar suppressing high nitrogen toxicity and decreasing lower nitrogen deficiency effects on rapeseed growth by improving nitrogen use efficiency via enhancing soil conditions, enzymatic activities and soil nitrogen utilization potential and thus improving rapeseed growth and yield.

Effect of site hydrological conditions and soil aggregate sizes on the stabilization of heavy metals (Cu, Ni, Pb, Zn) by biochar

Biochar is a popular material that would effectively immobilize heavy metals in soil, which can greatly decrease the health risk of heavy metals. Although many previous studies have studied the immobilization of heavy metals by biochar, the influence of hydrological conditions on the immobilization effect is still not clear. This paper carried out column experiments to study the effect of fluctuating groundwater table on Cu, Ni, Pb, Zn distribution and speciation with the addition of biochar from pyrolysis of swine manure. Experimental results showed that biochar could significantly decrease the leaching toxicity of Cu and Ni by 24.4% and 44.7% respectively, while the immobilization effect of Pb and Zn was relatively insignificant. The average reduction percentage of bioavailable Cu was 14.5%, 39.5% and 33.3% in the unsaturated zone, fluctuating zone and saturated zone respectively, showing the better immobilization effect in the fluctuating zone and saturated zone. The residual fraction of heavy metals increased significantly after the addition of biochar, and the increase of residual fraction was larger in small soil aggregates. This study helped illustrate the influence of hydrological conditions and soil aggregate sizes on the stabilization effect of heavy metals by biochar, which could be used to guide the remediation process of sites contaminated by heavy metals.

Novel insights into the adsorption of organic contaminants by biochar: A review

With rising concerns in the practical application of biochar for the remediation of environment influenced by various organic contaminants, a critical review to facilitate insights the crucial role that biochar has played in wastewater and polluted soil decontamination is urgently needed. This research therefore aimed to describe different intriguing dimensions of biochar interactions with organic contaminants, which including: (i) an introduction of biochar preparation and the related physicochemical properties, (ii) an overview of mechanisms and factors controlling the adsorption of organic contaminants onto biochar, and (iii) a summary of the challenges and an outlook of the further research needs in this issue. In the light of the survey consequences, the appearance of biochar indicates the potential in substituting the existing costly adsorbents, and it has been proved that biochar is one promising adsorbent for organic pollutants adsorption removal from water and soil. However, some research gaps, such as dynamic adsorption, potential environmental risks, interactions between biochar and soil microbes, novel modification techniques, need to be further investigated to facilitate its practical application. This research will be conductive to better understanding the adsorption removal of organic contaminants by biochar.

Microwave assisted carbonization and activation of biochar for energy-environment nexus: A review

Conventional thermochemical conversion techniques for biofuel production from lignocellulosic biomass is often non-selective and energy inefficient. Microwave assisted pyrolysis (MAP) is cost and energy-efficient technology aimed for value-added bioproducts recovery from biomass with less environmental impacts. The present review emphasizes the performance of MAP in terms of product yield, characteristics and energy consumption and further it compares it with conventional pyrolysis. The significant role of biochar as catalyst in microwave pyrolysis for enhancing the product selectivity and quality, and the influence of microwave activation on product composition identified through sophisticated techniques has been highlighted. Besides, the application of MAP based biochar as soil conditioner and heavy metal immobilization has been illustrated. MAP accomplished at low temperature creates uniform thermal gradient than conventional mode, thereby producing engineered char with hotspots that could be used as catalysts for gasification, energy storage, etc. The stability, nutrient content, surface properties and adsorption capacity of biochar was enhanced by microwave activation, thus facilitating its use as soil conditioner. Many reviews until now on MAP mostly dealt with operational conditions and product yield with limited focus on comparative energy consumption with conventional mode, analytical techniques for product characterization and end application especially concerning agriculture. Thus, the present review adds on to the current state of art on microwave assisted pyrolysis covering all-round aspects of production followed by characterization and applications as soil amendment for increasing crop productivity in addition to the production of value-added chemicals, thus promoting process sustainability in energy and environment nexus.

Effect of sewage sludge biochar on the soil nutrient, microbial abundance, and plant biomass: A sustainable approach towards mitigation of solid waste

Soils functions, fertility, and microbial abundance may alter in various ways by the biochar amendments to the soil. This study revealed the way of pyrolysis temperature influences the biochar quality and its addition for improving soil properties. The SS biochar was synthesized via pyrolysis and characterized by SEM and FTIR for studying surface images and chemical functional groups. The biochar upon addition with soil was studied for physiological parameters of plants like seed germination index, root length, shoot length, biomass, metal (loid) analysis of soil, SS and SS biochar, total organic content, C: N ratio, NPK values, etc. Besides, combinations of biochar: soil {1:3 (25% + 75%), 1:1 (50% + 50%), and 3:1 (75% + 25%)} ratios were used for studying the effect of biochar on soil microbial community. The 16S rRNA metagenomic analysis revealed the dominance of phyla: Proteobacteria, Actinobacteria, and Acidobacteria that influence the soil nutrient cycle when applied at ratio 1:3. This study highlights the valorization of SS into biochar and studied the effect of biochar augmentation with soil; its impact on soil nutrients, microbial abundance, and plant biomass enhancement. The greener approach also mitigates and helps in the sustainable management of solid wastes, thus reducing GHGs emissions and improves nutrient cycling.

Critical impacts of pyrolysis conditions and activation methods on application-oriented production of wood waste-derived biochar

Wood waste-derived biochar with tunable carbon structure and surface functionality has a great potential for various environmental applications and circular economy; however, a holistic understanding on the application-oriented production of high-efficacy biochar is lacking. Thus, the co-impacts of different pyrolysis conditions (temperature and duration) and activation methods (steam, CO₂, and acid pretreatment) on the biochar properties were first investigated. A temperature of 650 ℃ was effective in forming carbonized structure in biochar, while 750 ℃ was critical for the porous structure development. A longer pyrolysis duration (>60 min) enhanced the pore volume without compromising the yield. The activated biochar exhibited a larger pore volume (2.1- to 2.9-fold of pristine biochar) for potential high-end emerging applications. The acid pretreatment effectively removed dissolved organic carbon and most metals from the biochar. This study provides an essential guidance on the fit-for-purpose designs of biochar production conditions for sustainable wood waste management.

Enhancement of plasticizer adsorption by utilizing a rice bran-derived adsorbent

Bis(2-ethylhexyl) phthalate (DEHP) and di-n-butyl phthalate (DBP) are commonly used plasticizers in many countries and are detected at significant levels in the environment. Wastewater treatment plants are currently unable to completely treat wastewater discharges containing plasticizers. Rice bran was used to prepare magnetic-activated biochar (MAB) as a reusable adsorbent for enhanced adsorption of DEHP and DBP. The influence of the adsorbent dose, temperature, and adsorption time on the removal efficiency of MAB was studied using response surface methodology (RSM). An analysis of the results indicated that the optimum conditions were a MAB dose of 3.6 g/L, a temperature of 49 °C, and an adsorption time of 454 min for DEHP removal; and a MAB dose of 3.7 g/L, a temperature of 36 °C and an adsorption time of 312 min for DBP removal. The adsorption isotherm data were well fitted by the Langmuir isotherm model, and the adsorption kinetic data were reasonably described by the pseudosecond-order model. MAB is a potential adsorbent for DEHP and DBP removal because of good removal efficiency and reusability.

Sustainable biochar/MgFe2O4 adsorbent for levofloxacin removal: Adsorption performances and mechanisms

The limitation of low efficiency and complicated separation after adsorption make the practical application of biochar a huge challenge. Here, one pomelo peel-derived magnetic biochar composite, biochar supported MgFe₂O₄ (BMF) was fabricated and adopted for Levofloxacin (LFX) adsorption. Adsorption behaviors and mechanisms were investigated by characterization analysis, batch experiments, and data modeling. Results indicated that adsorption could be strikingly influenced by pyrolysis temperature. Adsorption kinetic was well fitted by pseudo-second-order model. Adsorption isotherm was best fitted with Freundlich model. The maximum adsorption capacity was 115 mg g^-1. Moreover, hydrophobic effect played a limited contribution according to dual-mode model analysis. LFX adsorption was spontaneous and endothermic. Adsorption mechanisms were ascribed to electrostatic interactions, H-bonding, functional groups complexation, and π-π electron donor-acceptor interactions. Besides that, BMF had the potential for repeated use. This research proposed a novel and promising method for LFX or other antibiotics adsorption removal.

Effect of dissolved biochar on the transfer of antibiotic resistance genes between bacteria

The spread of antibiotic resistance genes (ARGs) is a global environmental issue. Dissolved biochar is more likely to contact bacteria in water, producing ecological risks. This study explored the effects of dissolved biochar on ARGs transfer in bacteria. Conjugative transfer efficiency was significantly different following treatment with different types of dissolved biochar. Typically, humic acid-like substance in dissolved biochar can significantly improve the transfer efficiency of ARGs between bacteria. When the concentration of dissolved biochar was ≤10 mg biochar/mL, humic acid-like substance substantially promoted ARGs transfer. An increase in dissolved biochar concentration weakened the ARGs transfer from humic acid-like substance. The inhibitory effects of small-molecule matters dominated, decreasing conjugative transfer frequency. At a concentration of 100 mg biochar/mL, the conjugative transfer efficiency of all treatments was lower than that of control. Compared with corn straw dissolved biochar, there were more transconjugants in pine sawdust dissolved biochar. Following treatment with 10 mg biochar/mL pine sawdust dissolved biochar, the number of transconjugants was at its maximum; approximately 7.3 folds higher than the control. We also explored mechanisms by which dissolved biochar impacts conjugative transfer. Due to the complex composition of dissolved biochar, its effects on the expression of conjugative transfer-related genes were also dynamic. This study investigates the ecological risk of biochar and guides its scientific application.