The structure and assembly mechanisms of plastisphere microbial community in natural marine environment

Plastisphere assemblages differ from the surrounding bacterial communities in transitional coastal environments

Marine plastic contamination is currently considered ubiquitous in aquatic environments. These particles present a resistant and hydrophobic substrate known to promote microbial colonisation and biofilm formation in aquatic ecosystems, the so-called "Plastisphere", raising concerns about its potential ecological risks. The novelty of this topic translates into a relatively low number of studies, including for transitional coastal ecosystems, such as sandy beaches or estuarine habitats. Therefore, a sampling campaign was conducted in two transitional coastal ecosystems - the Mondego estuary (Portugal) - and adjacent sandy beaches (winter 2020). After visual sorting and filtering of suspected particles under sterile conditions DNA extraction and 16S rRNA amplicon high throughput sequencing was used to profile the bacterial communities on the surface of plastic particles and from those found on the water and sediments from the sampled transitional coastal ecosystems. All particles were characterised according to type, colour and size, and the chemical nature of the particles was determined by FTIR-ATR or μ-FTIR spectroscopy after DNA extraction. All samples contained plastics in several sizes (micro and mesoplastics), shapes (higher abundances of fragments on beaches and fibres in the estuarine waters), colours and polymers. Although no significant differences were detected in the α-diversity indexes of the bacterial communities between plastics and their surrounding environments, data showed the occurrence of unique key bacterial groups on plastics from both environments, such as pathogens (e.g., Lactococcus, Staphylococcus and Streptococcus) and groups commonly associated with wastewater treatment plants (e.g., members of the phylum Firmicutes). This highlights the concerns for plastics to act as vectors of transmission and spread of these bacterial groups in transitional coastal ecosystems. Furthermore, it raises the possibility that (micro)plastics entering the estuary from the sea play a substantial contribution to overall dynamics of (micro)plastics and their microbial assemblages in the estuarine system.

Aquatic plastisphere: Interactions between plastics and biofilms

Because of the high production rates, low recycling rates, and poor waste management of plastics, an increasing amount of plastic is entering the aquatic environment, where it can provide new ecological niches for microbial communities and form a so-called plastisphere. Recent studies have focused on the one-way impact of plastic substrata or biofilm communities. However, our understanding of the two-way interactions between plastics and biofilms is still limited. This review first summarizes the formation process and the co-occurrence network analysis of the aquatic plastisphere to comprehensively illustrate the succession pattern of biofilm communities and the potential consistency between keystone taxa and specific environmental behavior of the plastisphere. Furthermore, this review sheds light on mutual interactions between plastics and biofilms. Plastic properties, environmental conditions, and colonization time affect biofilm development. Meanwhile, the biofilm communities, in turn, influence the environmental behaviors of plastics, including transport, contaminant accumulation, and especially the fragmentation and degradation of plastics. Based on a systematic literature review and cross-referencing from these disciplines, the current research focus, and future challenges in exploring aquatic plastisphere development and biofilm-plastic interactions are proposed.

Harmful algae and pathogens on plastics in three mediterranean coastal lagoons

Plastic is now a pervasive pollutant in all marine ecosystems. The microplastics and macroplastic debris were studied in three French Mediterranean coastal lagoons (Prevost, Biguglia and Diana lagoons), displaying different environmental characteristics. In addition, biofilm samples were analyzed over the seasons to quantify and identify microalgae communities colonizing macroplastics, and determine potentially harmful microorganisms. Results indicate low but highly variable concentrations of microplastics, in relation to the period and location of sampling. Micro-Raman spectroscopy analyses revealed that the majority of macroplastic debris corresponded to polyethylene (PE) and low-density polyethylene (LDPE), and to a far lesser extent to polypropylene (PP). The observations by Scanning Electron Microscopy of microalgae communities colonizing macroplastic debris demonstrated differences depending on the seasons, with higher amounts in spring and summer, but without any variation between lagoons and polymers. Among the Diatomophyceae, the most dominant genera were Amphora spp., Cocconeis spp., and Navicula spp.. Cyanobacteria and Dinophyceae such as Prorocentrum cordatum, a potentially toxic species, were also found sporadically. The use of Primer specific DNA amplification tools enabled us to detect potentially harmful microorganisms colonizing plastics, such as Alexandrium minutum or Vibrio spp. An additional in situ experiment performed over one year revealed an increase in the diversity of colonizing microalgae in relation to the duration of immersion for the three tested polymers PE, LDPE and polyethylene terephthalates (PET). Vibrio settled durably after two weeks of immersion, whatever the polymer. This study confirms that Mediterranean coastal lagoons are vulnerable to the presence of macroplastic debris that may passively host and transport various species, including some potentially harmful algal and bacterial microorganisms.

Response of sediment microbial communities to different levels of PAC contamination and exposure time

Coagulants such as polyaluminium chloride (PAC) are widely used for removing phosphorus from eutrophic water, but its application for water treatment can potentially harm the environment. In this study, a four-timepoint exposure experiment was performed at week 1, 3, 7 and 10 to investigate how microbial communities in lake sediments respond to different concentrations of PAC (RS (raw lake water with nothing added), Low, Medium and High). The results showed that, while PAC can efficiently decrease the amount of C, N and P in lake water, the presence of residual aluminum and aluminum precipitates can greatly affect the microbial communities in lake sediments. In particular, different concentrations of PAC and exposure time affected the microbial diversity and structure of lake sediments, with changes being especially obvious at high concentration of PAC after 10 weeks of exposure. Moreover, the use of PAC significantly increased the relative abundances of Gammaproteobacteria and Competibacter, while reducing those of Thermodesulfovibrionia, Vicinamibacterales, and BSV26 in time- and concentration-dependent manners. Network analysis further showed strong correlations between differential bacterial species of PAC in high concentration at 10 weeks, which further suggested that PAC treatment changed the complex structure of microbiota in lake sediment. Finally, correlation analysis indicated a close connection between water parameters and differential species induced by PAC treatment. Overall, PAC contamination changed the microbial communities at different taxonomy levels and influenced the functional pathways to potentiate the P removal, and the results offered interesting insights into the use of PAC in water treatment and its impact on biogeochemical cycling. These results indicated that more attention need to be paid to the potential impact of chemical phosphorus removing reagents on the environment, including eutrophic water.

Response and recovery mechanisms of river microorganisms to gradient concentrations of estrogen

As an important ecological system on the earth, rivers have been influenced by the rapid development of urbanization, industrialization, and anthropogenic activities. Increasingly more emerging contaminants, such as estrogens, are discharged into the river environment. In this study, we conducted river water microcosmic experiments using in situ water to investigate the response mechanisms of microbial community when exposed to different concentrations of target estrogen (estrone, E1). Results showed that both exposure time and concentrations shaped the diversity of microbial community when exposed to E1. Deterministic process played a vital role in influencing microbial community over the entire sampling period. The influence of E1 on microbial community could last for a longer time even after the E1 has been degraded. The microbial community structure could not be restored to the undisturbed state by E1, even if disturbed by low concentrations of E1(1 μg/L and 10 μg/L) for a short time. Our study suggests that estrogens could cause long-term disturbance to the microbial community of river water ecosystem and provides a theoretical basis for assessing the environmental risk of estrogens in rivers.

Time-course biofilm formation and presence of antibiotic resistance genes on everyday plastic items deployed in river waters

The plastisphere has been widely studied in the oceans; however, there is little information on how living organisms interact with the plastisphere in freshwater ecosystems, and particularly on how this interaction changes over time. We have characterized, over one year, the evolution of the eukaryotic and bacterial communities colonizing four everyday plastic items deployed in two sites of the same river with different anthropogenic impact. α-diversity analyses showed that site had a significant role in bacterial and eukaryotic diversity, with the most impacted site having higher values of the Shannon diversity index. β-diversity analyses showed that site explained most of the sample variation followed by substrate type (i.e., plastic item) and time since first colonization. In this regard, core microbiomes/biomes in each plastic at 1, 3, 6 and 12 months could be identified at genus level, giving a global overview of the evolution of the plastisphere over time. The measured concentration of antibiotics in the river water positively correlated with the abundance of antibiotic resistance genes (ARGs) on the plastics. These results provide relevant information on the temporal dynamics of the plastisphere in freshwater ecosystems and emphasize the potential contribution of plastic items to the global spread of antibiotic resistance.

Ecological insights into the resilience of marine plastisphere throughout a storm disturbance

Among numerous research about marine plastisphere, the community living on the surface of plastic debris, little attention was given to the ecological mechanisms governing prokaryotes compared to eukaryotes, and even less focused on their resilience in a changing climate with more storm prevalence. Our current research recruited an integrated approach involving community succession across temporal dimension, ecological mechanisms that govern the assembly, and resilience to environmental perturbations to highlight the ecology of different kingdoms in the plastisphere. Towards this goal, we examined the succession of the prokaryotic and eukaryotic communities on artificial plastic nets in a sidestream of seawater from the Gulf of Aqaba over 35 days. A robust local storm enabled investigation of the alterations before, during, and after this disturbance, aiming at the community's potential to recover. Data from 16S and 18S rRNA sequencing and microscopic analyses decrypted the plastisphere diversity, community assembly, and stochasticity, followed by further analyses of functional and co-occurrence networks for the prokaryotic group. Prokaryotic and eukaryotic communities underwent exact opposite ecological mechanisms. While determinism driven by a robust environmental selection dictated the prokaryotic community assembly, stochasticity prevailed when this condition was relaxed. Interestingly, resilience against disturbance was observed in prokaryotes but not in eukaryotes. The decrease in compositional, functional diversity and network complexity in the prokaryotic community was reversed, presumably due to the niche specification process and high dispersal. Niche specification following perturbation was evident in some bacteria by selected functions associated with plastic degradation, stress response, and antibiotic resistance. On the contrary, eukaryotes decreased in diversity and were dominated by the commonly found Chlorophyta towards the later successional period. Novel findings on the ecology of marine plastisphere during perturbation encourage the integration of this aspect into prediction research.

Structure-Function Covariation of Phycospheric Microorganisms Associated with the Typical Cross-Regional Harmful Macroalgal Bloom

Unravelling the structure-function variation of phycospheric microorganisms and its ecological correlation with harmful macroalgal blooms (HMBs) is a challenging research topic that remains unclear in the natural dynamic process of HMBs. During the world's largest green tide bloom, causative macroalgae Ulva prolifera experienced dramatic changes in growth state and environmental conditions, providing ideal scenarios for this investment. Here, we assess the phycospheric physicochemical characteristics, the algal host's biology, the phycospheric bacterial constitutive patterns, and the functional potential during the U. prolifera green tide. Our results indicated that (i) variation in the phycosphere nutrient structure was closely related to the growth state of U. prolifera; (ii) stochastic processes govern phycospheric bacterial assembly, and the contribution of deterministic processes to assembly varied among phycospheric seawater bacteria and epiphytic bacteria; (iii) phycospheric seawater bacteria and epiphytic bacteria exhibited significant heterogeneity variation patterns in community composition, structure, and metabolic potential; and (iv) phycospheric bacteria with carbon or nitrogen metabolic functions potentially influenced the nutrient utilization of U. prolifera. Furthermore, the keystone genera play a decisive role in the structure-function covariation of phycospheric bacterial communities. Our study reveals complex interactions and linkages among environment-algae-bacterial communities which existed in the macroalgal phycosphere and highlights the fact that phycospheric microorganisms are closely related to the fate of the HMBs represented by the green tide. IMPORTANCE Harmful macroalgal blooms represented by green tides have become a worldwide marine ecological problem. Unraveling the structure-function variation of phycospheric microorganisms and their ecological correlation with HMBs is challenging. This issue is still unclear in the natural dynamics of HMBs. Here, we revealed the complex interactions and linkages among environment-algae-bacterial communities in the phycosphere of the green macroalgae Ulva prolifera, which causes the world's largest green tides. Our study provides new ideas to increase our understanding of the variation patterns of macroalgal phycospheric bacterial communities and the formation mechanisms and ecological effects of green tides and highlights the importance of phycospheric microorganisms as a robust tool to help understand the fate of HMBs.

Assembly strategies for polyethylene-degrading microbial consortia based on the combination of omics tools and the "Plastisphere"

Numerous microorganisms and other invertebrates that are able to degrade polyethylene (PE) have been reported. However, studies on PE biodegradation are still limited due to its extreme stability and the lack of explicit insights into the mechanisms and efficient enzymes involved in its metabolism by microorganisms. In this review, current studies of PE biodegradation, including the fundamental stages, important microorganisms and enzymes, and functional microbial consortia, were examined. Considering the bottlenecks in the construction of PE-degrading consortia, a combination of top-down and bottom-up approaches is proposed to identify the mechanisms and metabolites of PE degradation, related enzymes, and efficient synthetic microbial consortia. In addition, the exploration of the plastisphere based on omics tools is proposed as a future principal research direction for the construction of synthetic microbial consortia for PE degradation. Combining chemical and biological upcycling processes for PE waste could be widely applied in various fields to promote a sustainable environment.

The geographical and seasonal effects on the composition of marine microplastic and its microbial communities: The case study of Israel and Portugal

Introduction

Floating microplastic debris are found in most marine environments around the world. Due to their low density and high durability, plastic polymers such as polyethylene, polypropylene, and polystyrene serve as stable floating substrates for the colonization of diverse communities of marine organisms. Despite the high abundance of microplastic debris in the oceans, it is not clear how the geographical location and season affect the composition of marine microplastic and its bacterial microbiome in the natural environment.

Methods

To address this question, microplastic debris were collected from the sea surface near estuaries in the Mediterranean Sea (Israel) and in the Atlantic Ocean (Portugal) during summer and winter of 2021. The microplastic physical characteristics, including shape, color, and polymer composition, were analyzed and the taxonomic structure of the microplastic bacterial microbiome was characterized using a high-resolution metabarcoding pipeline.

Results

Our results, supported by previously published data, suggest that the plastisphere is a highly diverse ecosystem which is strongly shaped by spatial and temporal environmental factors. The geographical location had the highest impact on the plastisphere physical characteristics and its microbiome composition, followed by the season. Our metabarcoding analysis showed great variability between the different marine environments with a very limited microbiome "core."

Discussion

This notion further emphasizes the importance of plastisphere studies in different geographical locations and/or seasons for the characterization of the plastisphere and the identification of plastic-associated species.

Evidence of coupled autotrophy and heterotrophy on plastic biofilms and its influence on surrounding seawater

We measured phytoplankton primary production and heterotrophic bacterial activities on microplastics and seawater in the Northwestern Mediterranean Sea during two 3-month spring periods over 2 consecutive years. Microorganisms growing on a 5 mm diameter low density polyethylene films (LDPE; 200 μm thick) faced two contrasting conditions depending on the year. Spring 2018 was characterized by consistent nutrient inputs and bloom development. In spring 2019, nutrient inputs and bloom were low. For the first time, we observed a clear coupling between primary production and heterotrophic prokaryote production on microplastics during both years, but with different intensity between years that reflected the crucial role of the trophic environmental conditions (nutrient supply) in shaping microbial activities on plastics. We found that high primary production on plastics could support the whole (net autotrophy) or the majority of the bacterial carbon demand needed for heterotrophic activities, supplemented by other carbon sources if surrounding waters are highly productive. We propose that microbial activity on plastics influences the microbial community in the surrounding seawater, especially when the environmental conditions are less favorable. An illustrative image of the role of plastics in the environment could be that of an inverter in an electrical circuit that mitigates both positive and negative variations. Our results highlight the potential role of the plastisphere in shaping biogeochemical cycles in the context of increasing amounts of plastic particles in the marine environment.

Bacterial colonization dynamics of different microplastic types in an anoxic salt marsh sediment and impact of adsorbed polychlorinated biphenyls on the plastisphere

Plastic debris dispersed into the environment provide a substrate for microbial colonization, constituting a new human-made ecosystem called "plastisphere", and altering the microbial species distribution in aquatic, coastal and benthic ecosystems. The study aims at exploring the interaction among microplastics (MPs) made of different polymers, a persistent organic contaminant (polychlorinated biphenyls, PCBs), and the environmental microbial communities, in an anoxic marine sediment. Plastic pellets were incubated in the field in a salt marsh anoxic sediment, to observe the stages of plastisphere formation, by quantitative PCR and 16S rRNA gene sequencing, and PCB dechlorination activity on the MPs surface. Microbes from the sediment rapidly colonized the different microplastics types, with PVC recruiting a peculiar community enriched in sulfate-reducing bacteria. The composition of the plastisphere varied along the 1-year incubation possibly in response either to warmer temperatures in spring-summer or to microhabitat's changes due to the progressive plastic surface weathering. Even if PCB contaminated MPs were able to recruit potentially dehalogenating taxa, actual dechlorination was not detectable after 1 year. This suggests that the concentration of potentially dehalorespiring bacteria in the natural environment could be too low for the onset of the dechlorination process on MP-sorbed contaminants. Our study, which is among very few available longitudinally exploring the plastisphere composition in an anoxic sediment context, is the first exploring the fate and possible biodegradation of persistent organic pollutants sorbed on MPs reaching the seafloor.

Pathogens transported by plastic debris: does this vector pose a risk to aquatic organisms?

Microplastics are small (<5 mm) plastic particles of varying shapes and polymer types that are now widespread global contaminants of marine and freshwater ecosystems. Various estimates suggest that several trillions of microplastic particles are present in our global oceanic system, and that these are readily ingested by a wide range of marine and freshwater species across feeding modes and ecological niches. Here, we present some of the key and pressing issues associated with these globally important contaminants from a microbiological perspective. We discuss the potential mechanisms of pathogen attachment to plastic surfaces. We then describe the ability of pathogens (both human and animal) to form biofilms on microplastics, as well as dispersal of these bacteria, which might lead to their uptake into aquatic species ingesting microplastic particles. Finally, we discuss the role of a changing oceanic system on the potential of microplastic-associated pathogens to cause various disease outcomes using numerous case studies. We set out some key and imperative research questions regarding this globally important issue and present a methodological framework to study how and why plastic-associated pathogens should be addressed.

Microbial community niches on microplastics and prioritized environmental factors under various urban riverine conditions

Microplastics (MPs) provide habitats to microorganisms in aquatic environments; distinct microbial niches have recently been elucidated. However, there is little known about the microbial communities on MPs under urban riverine conditions, in which environmental factors fluctuate. Therefore, this study investigated MP biofilm communities under various urban riverine conditions (i.e., organic content, salinity, and dissolved oxygen (DO) concentration) and evaluated the prioritized factors affecting plastisphere communities. Nine biofilm-forming reactors were operated under various environmental conditions. Under all testing conditions, biofilms grew on MPs with decreasing bacterial diversity. Interestingly, biofilm morphology and bacterial populations were driven by the environmental parameters. We found that plastisphere community structures were grouped according to the environmental conditions; organic content in the water was the most significant factor determining MP biofilm communities, followed by salinity and DO concentration. The principal plastisphere communities were Proteobacteria, Bacteroidetes, Cyanobacteria, and Firmicutes phyla. In-depth analyses of plastisphere communities revealed that biofilm-forming and plastic-degrading bacteria were the predominant microbes. In addition, potential pathogens were majorly discovered in the riverine waters with high organic content. Our results suggest that distinct plastisphere communities coexist with MP particles under certain riverine water conditions, implying that the varied MP biofilm communities may affect urban riverine ecology in a variety of ways.

Watershed urbanization enhances the enrichment of pathogenic bacteria and antibiotic resistance genes on microplastics in the water environment

Microplastics (MPs) serve as vectors for microorganisms and antibiotic resistance genes (ARGs) and contribute to the spread of pathogenic bacteria and ARGs across various environments. Patterns of microbial communities and ARGs in the biofilm on the surface of MPs, also termed as plastisphere, have become an issue of global concern. Although antibiotic resistome in the plastisphere has been detected, how watershed urbanization affects patterns of potential pathogens and ARGs in the microplastic biofilms is still unclear. Here, we compared the bacterial communities, the interaction between bacterial taxa, pathogenic bacteria, and ARGs between the plastisphere and their surrounding water, and revealed the extensive influence of urbanization on them. Our results showed that bacterial communities and interactions in the plastisphere differed from those in their surrounding water. Microplastics selectively enriched Bacteroidetes from water. In non-urbanized area, the abundance of Oxyphotobacteria was significantly (p < 0.05) higher in plastisphere than that in water, while α-Proteobacteria was significantly (p < 0.05) higher in plastisphere than those in water of urbanized area. Pathogenic bacteria, ARGs, and mobile genetic elements (MGEs) were significantly (p < 0.05) higher in the urbanized area than those in non-urbanized area. MPs selectively enriched ARG-carrying potential pathogens, i.e., Klebsiella pneumoniae and Enterobacter cloacae, and exhibited a distinct effect on the relative abundance of ARG and pathogens in water with different urbanization levels. We further found ARGs were significantly correlated to MGEs and pathogenic bacteria. These results suggested that MPs would promote the dissemination of ARGs among microbes including pathogenic bacteria, and urbanization would affect the impact of MPs on microbes, pathogens, and ARGs in water. A high level of urbanization could enhance the enrichment of pathogens and ARGs by MPs in aquatic systems and increase microbial risk in aquatic environments. Our findings highlighted the necessity of controlling the spread of ARGs among pathogens and the usage of plastic products in ecosystems of urban areas.

Bioorganic fertilizer promotes pakchoi growth and shapes the soil microbial structure

As a functional probiotic, Bacillus subtilis can promote crop growth and improve nutrient utilization by various mechanisms, so it has been made into bioorganic fertilizer as a replacement for chemical fertilizer. However, the effects of B. subtilis bioorganic fertilizer application on the yield and quality of commercial crops of Brassica chinensis L., the soil physicochemical properties and the microflora have not been clarified. In this study, pot experiments were conducted using Brassica chinensis L. plants with four fertilization treatments: control without fertilization (CK), chemical fertilizer (CF), organic fertilizer (OF), and bioorganic fertilizer containing B. subtilis (BF). After 30 days of pot experiment, the results showed that BF efficiently improved plant height and biomass (1.20- and 1.93-fold, respectively); as well as significantly increasing soil available potassium and pH value. Using high-throughput sequencing, we examined the bacterial and fungal communities in the soil, and found that their diversity was remarkablely reduced in the BF treatment compared to CK group. A principal coordinate analysis also showed a clear separation of bacterial and fungal communities in the BF and CK groups. After application of B. subtilis bioorganic fertilizer, some beneficial bacteria (such as Bacillus and Ammoniphilus) and fungi (Trichoderma and Mortierella) were enriched. A network analysis indicated that bacteria were the dominant soil microbes and the presence of B. subtilis stimulated the colonization of beneficial microbial communities. In addition, predictive functional profiling demonstrated that the application of bioorganic fertilizer enhanced the function of mineral element metabolism and absorption and increased the relative abundance of saprotrophs. Overall, the application of bioorganic fertilizer effectively changed the soil microflora, improved the soil available potassium and pH value, and boosted the yield of Brassica chinensis L. This work has valuable implications for promoting the safe planting of facility vegetables and the sustainable development of green agriculture.

Plastisphere in lake waters: Microbial diversity, biofilm structure, and potential implications for freshwater ecosystems

Once dispersed in water, microplastic (MP) particles are rapidly colonised by aquatic microbes, which can adhere and grow onto solid surfaces in the form of biofilms. This study provides new insights on microbial diversity and biofilm structure of plastisphere in lake waters. By combining Fourier Confocal Laser Scanning Microscopy (CLSM), Transform Infrared Spectroscopy (FT-IR) and high-throughput DNA sequencing, we investigated the microbial colonization patterns on floating MPs and, for the first time, the occurrence of eukaryotic core members and their possible relations with biofilm-forming bacterial taxa within the plastisphere of four different lakes. Through PCR-based methods (qPCR, LAMP-PCR), we also evaluated the role of lake plastisphere as long-term dispersal vectors of potentially harmful organisms (including pathogens) and antibiotic resistance genes (ARGs) in freshwater ecosystems. Consistent variation patterns of the microbial community composition occurred between water and among the plastisphere samples of the different lakes. The eukaryotic core microbiome was mainly composed by typical freshwater biofilm colonizers, such as diatoms (Pennales, Bacillariophyceaea) and green algae (Chlorophyceae), which interact with eukaryotic and prokaryotic microbes of different trophic levels. Results also showed that MPs are suitable vectors of biofilm-forming opportunistic pathogens and a hotspot for horizontal gene transfer, likely facilitating antibiotic resistance spread in the environments.

Bacterial colonisation dynamics of household plastics in a coastal environment

Accumulation of plastics in the marine environment has widespread detrimental consequences for ecosystems and wildlife. Marine plastics are rapidly colonised by a wide diversity of bacteria, including human pathogens, posing potential risks to health. Here, we investigate the effect of polymer type, residence time and estuarine location on bacterial colonisation of common household plastics, including pathogenic bacteria. We submerged five main household plastic types: low-density PE (LDPE), high-density PE (HDPE), polypropylene (PP), polyvinyl chloride (PVC) and polyethylene terephthalate (PET) at an estuarine site in Cornwall (U.K.) and tracked bacterial colonisation dynamics. Using both culture-dependent and culture-independent approaches, we found that bacteria rapidly colonised plastics irrespective of polymer type, reaching culturable densities of up to 1000 cells cm³ after 7 weeks. Community composition of the biofilms changed over time, but not among polymer types. The presence of pathogenic bacteria, quantified using the insect model Galleria mellonella, increased dramatically over a five-week period, with Galleria mortality increasing from 4% in week one to 65% in week five. No consistent differences in virulence were observed between polymer types. Pathogens isolated from plastic biofilms using Galleria enrichment included Serratia and Enterococcus species and they harboured a wide range of antimicrobial resistance genes. Our findings show that plastics in coastal waters are rapidly colonised by a wide diversity of bacteria independent of polymer type. Further, our results show that marine plastic biofilms become increasingly associated with virulent bacteria over time.

Interactions of microplastics with organic, inorganic and bio-pollutants and the ecotoxicological effects on terrestrial and aquatic organisms

As emerging contaminants, microplastics (MPs) have attracted global attention. They are a potential risk to organisms, ecosystems and human health. MPs are characterized by small particle sizes, weak photodegradability, and are good environmental carriers. They can physically adsorb or chemically react with organic, inorganic and bio-pollutants to generate complex binary pollutants or change the environmental behaviors of these pollutants. We systematically reviewed the following aspects of MPs: (i) Adsorption of heavy metals and organic pollutants by MPs and the key environmental factors affecting adsorption behaviors; (ii) Enrichment and release of antibiotic resistance genes (ARGs) on MPs and the effects of MPs on ARG migration in the environment; (iii) Formation of "plastisphere" and interactions between MPs and microorganisms; (iv) Ecotoxicological effects of MPs and their co-exposures with other pollutants. Finally, scientific knowledge gaps and future research areas on MPs are summarized, including standardization of study methodologies, ecological effects and human health risks of MPs and their combination with other pollutants.

Dynamic patterns of quorum sensing signals in phycospheric microbes during a marine algal bloom

In the marine environment, the interactions among various species based on chemical signals play critical roles in influencing microbial structure and function. Quorum sensing (QS), the well-known signal-dependent communication autoinducer, is an important regulator in complex microbial communities. Here, we explored the QS gene profiles of phycosphere bacteria during a microcosmic phytoplankton bloom using metagenomic sequence data. More than fifteen subtypes of QS systems and 211,980 non-redundant amino acid sequences were collected and classified for constructing a hierarchical quorum-sensing database. The abundance of the various QS subtypes varied at different bloom stages and showed a strong correlation with phycosphere microorganisms. This suggested that QS is involved in regulating the phycosphere microbial succession during an algal bloom. A neutral community model revealed that the QS functional gene community assemblies were driven by stochastic processes. Co-occurrence model analysis showed that the QS gene networks of phycospheric microbes had similar topological structure and functional composition, which is a potential cornerstone for maintaining signal communication and population stabilization among microorganisms. Overall, QS systems have a strong relationship with the development of algal blooms and participate in regulating algal-associated microbial communities as chemical signals. This research reveals the chemical and ecological behavior of algal symbiotic bacteria and expands the current understanding of microbial dynamics in marine algal blooms.

Ecological responses of coral reef to polyethylene microplastics in community structure and extracellular polymeric substances

The relationships and interactions between extracellular polymeric substances (EPS) and microplastics (MPs) in coral reef ecosystems were symmetrically investigated. The current study aims to investigate the responses of scleractinian coral (Goniopora columna) to exposure of model MPs, exemplified by polyethylene (PE), in the size range of 40-48 μm as affected by MPs concentration of MP in the range between 0 and 300 mg L^-1 for 14 days. The structure of EPS-associated microbial community was studied using a series of techniques including high-throughput sequencing of 16 S rRNA, transmission electron microscopy (TEM), hydrodynamic diameter, surface charge (via zeta potential), X-ray diffraction (XRD), attenuated total reflectance‒Fourier transform infrared (ATR‒FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and fluorescence excitation-emission matrix (FEEM) spectroscopy. Microbial interactions between PE-MPs and coral caused aggregation and formation of EPS matrix, which resulted in increase and decrease in the relative abundance of Donghicola (Proteobacteria phylum) and Marivita (Proteobacteria phylum) in PE-MP-associated EPS, respectively. Particle size, electrostatic interactions, and complexation with the functional groups of the EPS-based matrix affected the humification index. FEEM spectroscopy analyses suggested the presence of humic- and fulvic-like fluorophores in EPS and dissolved organic matter (DOM) in PE-MP-derived DOM. The findings provided insights into the potential environmental implications of coral-based EPS and co-existing microbial assemblages due to EPS-PE-MP-microbiome interactions throughout the dynamic PE-MP exposure process.

Characteristics of microplastic pollution and analysis of colonized-microbiota in a freshwater aquaculture system

The microbial communities associated with microplastics (MPs) and their ambient environments have received wide attention. Although previous studies have reported the differences of microbial communities between MPs and natural environment or substrates, the effects of MPs on microbial balance and functions in ambient water remain unclear, particularly for aquaculture water. Here, we investigated the MPs pollution in farm ponds of grass carp located in the Foshan City of Guangdong Province and reported the distinction of bacterial structures, functions, and complexity between microbiota on MPs and in water. MPs with an average abundance of 288.53 ± 74.27 items/L in pond water were mostly fibers and cellulose, mainly transparent and in size of 0.5-1 mm. Structures and functions of bacterial communities on MPs significantly differed from that in pond water. A large number of enriched or depleted OTUs on MPs compared with water belong to the phylum Proteobacteria, the predominant phylum in microbial communities on MPs and in water. Some species included in the phylum Proteobacteria have been shown to be cellulose-degrading and pathogenic. Microbiota on MPs exhibited higher species richness and diversity as well as a more complex network than that in water, illustrating MPs as a distinct habitat in the aquaculture system.

Effects of Discarded Masks on the Offshore Microorganisms during the COVID-19 Pandemic

Numerous disposable plastic masks had been produced and used for preventing the worldwide COVID-19 pandemic effectively. Discarded masks are a potential source of microplastic pollution in marine ecosystems. The effect of discarded masks on offshore microorganisms is still unclear. Herein, we profiled the interaction between the microplastics released by discarded masks and marine microbes. The effects of mask quantity, time, and environment on the microplastic-related communities were determined. We characterized the bacterial communities of each group using 16S rRNA gene sequencing and metagenomic sequencing and correlated the community diversity to the physicochemical properties of seawater. We found that the diversity and richness of microflora on the surface of microplastics with different quantity and time varied significantly. Proteobacteria are the main bacteria on microplastics, and the KEGG metabolic pathway prediction shows that amino acid metabolism and carbohydrate metabolism were abundant. In addition, there was a correlation between bacterial communities and Antibiotic Resistance Ontology (ARO). We used scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR) techniques to evaluate the plastic polymer characteristics of disposable medical masks. Our research shows that disposable medical masks immersed in seawater can alter the microbial community. This study provides the most recent data and insights into the contamination of discarded masks in the marine environment.

Deciphering the Mechanisms Shaping the Plastisphere Microbiota in Soil

The gradual accumulation of microplastics has aroused increasing concern for the unique niche, termed “plastisphere.” As research so far has focused on their characteristics in aquatic ecosystems, our understanding of the colonization and assembly of the attached bacterial communities on microplastics in soil ecosystems remains poor. Here, we aimed to characterize the plastisphere microbiomes of two types of microplastics (polylactic acid [PLA] and polyethylene [PE]) differing in their biodegradability in two different soils. After incubation for 60 days, considerably lower alpha diversity of bacterial community was observed on the microplastic surfaces, and prominent divergences occurred in the microbial community compositions between the plastisphere and the bulk soil. The temperature, rather than polymer type, significantly induced the differences between the plastisphere communities. The rRNA gene operon (rrn) copy numbers were significantly higher in the PLA plastisphere, suggesting potential degradation. The co-occurrence network analysis showed that the PE plastisphere exhibited greater network complexity and stronger stability than those in the PLA plastisphere. The stochasticity ratio indicated the remarkable importance of stochastic process on community assembly in PE and PLA plastispheres, while the null model analysis showed the nonnegligible roles of deterministic processes in shaping the plastisphere communities. Higher contributions of homogenous selection in the PLA plastisphere were observed in comparison with the PE plastisphere, which could probably be attributed to the selective pressure induced by microplastic degradation. Our findings enhance our mechanistic understanding of the diversity patterns and assembly processes of plastisphere in soil environments and have important implications for microbial ecology and microplastic risk assessment.

IMPORTANCE The increasing pervasive microplastic pollution is creating a new environmental compartment, termed plastisphere. Even though there was conclusive information characterizing the plastisphere, the underlying mechanisms shaping the bacterial communities in the plastisphere in the soil remain unclear. Therefore, we incubated two types of microplastics (PE and PLA) in two different soils and explored the differences between plastisphere and bulk soil communities. Additionally, the co-occurrence network and the assembly processes of plastisphere were subjected to further analysis. Our results highlight the importance of selective recruitment of microplastics and contribute to the understanding of the diversity patterns and assembly processes of plastisphere in soil environments.

Incubation habitats and aging treatments affect the formation of biofilms on polypropylene microplastics

Microbial colonization and biofilm formation associated with microplastics (MPs) have recently attracted wide attention. However, little is known about the effect of MP aging and different exposed habitats on biofilm formation and associated microbial community characteristics. To obtain a comprehensive understanding, virgin and aged polypropylene MPs were selected as attachment substrates and exposed to different aquatic habitats (marine, estuary, and river). The results showed that the aging process could destroy surface structure and increase oxygen-containing groups of MPs. The total biomass of the biofilms, attached-bacterial OTU numbers, and α diversities increased with exposure time. The biofilms biomass and α diversity of MPs in the river were significantly higher than those in the marine and estuary habitats, and temperature and salinity were primary factors affecting microbial colonization. Bacterial communities in MP-attached biofilms were significantly different from those in surrounding water. Microorganisms tend to adhere to aged MPs, and especially, genes related to human pathogens were significantly expressed on aged MPs, suggesting a potential ecological and health risk of aged MPs in aquatic ecosystems. Our results showed that aged MPs and different habitats have an important influence on microbial colonization, and the weathering process can accelerate biofilm formation on MPs.

Bacterial colonisation of plastic in the Rockall Trough, North-East Atlantic: An improved understanding of the deep-sea plastisphere

Plastic pollution has now been found within multiple ecosystems across the globe. Characterisation of microbial assemblages associated with marine plastic, or the so-called 'plastisphere', has focused predominantly on plastic in the epipelagic zone. Whether this community includes taxa that are consistently enriched on plastic compared to surrounding non plastic surfaces is unresolved, as are the ecological implications. The deep sea is likely a final sink for most of the plastic entering the ocean, yet there is limited information on microbial colonisation of plastic at depth. The aim of this study was to investigate deep-sea microbial communities associated with polystyrene (PS) and polyurethane (PU) with Bath stone used as a control. The substrates (n = 15) were deployed in the Rockall Trough (Atlantic), and recovered 420 days later from a depth of 1796 m. To characterise the bacterial communities, 16S rRNA genes were sequenced using the Illumina MiSeq platform. A dominant core microbiome (taxa shared across all substrates) comprised 8% of total ASVs (amplicon sequence variant) and accounted for 92% of the total community reads. This suggests that many commonly reported members of the plastisphere are simply opportunistic which freely colonise any hard surface. Transiently associated species consisted of approximately 7% of the total community. Thirty genera were enriched on plastic (P < 0.05), representing 1% of the total community. The discovery of novel deep-sea enriched taxa included Aurantivirga, Algivirga, IheB3-7, Spirosoma, HTCC5015, Ekhidna and Calorithrix on PS and Candidatus Obscuribacter, Haloferula, Marine Methylotrophic Group 3, Aliivibrio, Tibeticola and Dethiosulfatarculus on PU. This small fraction of the microbiome include taxa with unique metabolic abilities and show how bacterial communities can be shaped by plastic pollution at depth. This study outlines a novel approach in categorising the plastisphere to elucidate the ecological implications of enriched taxa that show an affinity for colonising plastic.

Geographic Dispersal Limitation Dominated Assembly Processes of Bacterial Communities on Microplastics Compared to Water and Sediment

Microplastics provide new microbial niches in aquatic environments. Nevertheless, information on the assembly processes and potential ecological mechanisms of bacterial communities on microplastics from reservoirs is lacking. Here, we investigated the assembly processes and potential ecological mechanisms of bacterial communities on microplastics through full-length 16S rRNA sequencing in the Three Gorges Reservoir area of the Yangtze River, compared to water and sediment. The results showed that the Burkholderiaceae were the dominant composition of bacterial communities in microplastics (9.95%), water (25.14%), and sediment (7.22%). The niche width of the bacterial community on microplastics was lower than those in water and sediment. For the microplastics and sediment, distance-decay relationship results showed that the bacterial community similarity was significantly decreased with increasing geographical distance. In addition, the spatial turnover rate of the bacterial community on microplastics along the ~662-km reaches of the Yangtze River in the Three Gorges Reservoir area was higher than that in sediment. Null model analysis showed that the assembly processes of the bacterial community on microplastics were also different from those in water and sediments. Dispersal limitation (52.4%) was the primary assembly process of the bacterial community on microplastics, but variable selection was the most critical assembly process of the bacterial communities in water (47.6%) and sediment (66.7%). Thus, geographic dispersal limitation dominated the assembly processes of bacterial communities on microplastics. This study can enhance our understanding of the assembly mechanism of bacterial communities caused by the selection preference for microplastics from the surrounding environment. IMPORTANCE In river systems, microplastics create new microbial niches that significantly differ from those of the surrounding environment. However, the potential relationships between the biogeographic distribution and assembly processes of microbial communities on microplastics were still not well understood. This study could help us address the lack of knowledge about the assembly processes of bacterial communities on microplastics caused by selection from the surrounding environment. In this study, strong geographic dispersal limitation dominated assembly processes of bacterial communities on microplastics, compared to water and sediment, which may be responsible for the microplastic bacterial richness, and the niche distance was lower than those in water and sediment. In addition, sediment may be the main potential source of bacterial communities on microplastics in the Three Gorges Reservoir area, which makes higher community similarity between microplastics and sediment than between microplastics and water.

Estuarine plastisphere as an overlooked source of N2O production

“Plastisphere”, microbial communities colonizing plastic debris, has sparked global concern for marine ecosystems. Microbiome inhabiting this novel human-made niche has been increasingly characterized; however, whether the plastisphere holds crucial roles in biogeochemical cycling remains largely unknown. Here we evaluate the potential of plastisphere in biotic and abiotic denitrification and nitrous oxide (N₂O) production in estuaries. Biofilm formation provides anoxic conditions favoring denitrifiers. Comparing with surrounding bulk water, plastisphere exhibits a higher denitrifying activity and N₂O production, suggesting an overlooked N₂O source. Regardless of plastisphere and bulk water, bacterial and fungal denitrifications are the main regulators for N₂O production instead of chemodenitrification. However, the contributions of bacteria and fungi in the plastisphere are different from those in bulk water, indicating a distinct N₂O production pattern in the plastisphere. These findings pinpoint plastisphere as a N₂O source, and provide insights into roles of the new biotope in biogeochemical cycling in the Anthropocene.

The roles of marine plastisphere in global nitrogen cycling are largely unknown. Here, the authors indicate that the plastisphere could act as a potential source of N2O production, which is mainly regulated by the biotic denitrification

Plastisphere community assemblage of aquatic environment: plastic-microbe interaction, role in degradation and characterization technologies

It is undeniable that plastics are ubiquitous and a threat to global ecosystems. Plastic waste is transformed into microplastics (MPs) through physical and chemical disruption processes within the aquatic environment. MPs are detected in almost every environment due to their worldwide transportability through ocean currents or wind, which allows them to reach even the most remote regions of our planet. MPs colonized by biofilm-forming microbial communities are known as the ''plastisphere". The revelation that this unique substrate can aid microbial dispersal has piqued interest in the ground of microbial ecology. MPs have synergetic effects on the development, transportation, persistence, and ecology of microorganisms. This review summarizes the studies of plastisphere in recent years and the microbial community assemblage (viz. autotrophs, heterotrophs, predators, and pathogens). We also discussed plastic-microbe interactions and the potential sources of plastic degrading microorganisms. Finally, it also focuses on current technologies used to characterize those microbial inhabitants and recommendations for further research.

Oak-inspired anti-biofouling shape-memory unidirectional scaffolds with stable solar water evaporation performance

Biomimetic porous materials have contributed to the enhancement of solar-driven evaporation rate in interfacial desalination and clean water production. However, due to the presence of numerous microbes in water environment, biofouling should occur inside porous materials to clog the channels for water transfer, resulting in obvious inhibition of the solar-driven evaporation efficacy in long-term use. To prevent and control biofouling in porous materials for solar-driven evaporation, a facile and environment-friendly design is required in real application. Oak wood possesses vertically aligned channels for transpiration and polyphenol compounds with antimicrobial activity. In this work, inspired by the oak wood, we developed an anti-biofouling shape-memory chitosan scaffold with unidirectional channels and tannic acid coating (oak-inspired scaffold). The shape-memory property facilitated rapid decoration with oak-inspired photothermal and anti-biofouling coating inside the scaffold, respectively, which also promotes the material durability by avoiding the external force-induced permanent structure failure. More importantly, the oak-inspired tannic acid coating not only prevented bacterial adhesion and colonization, but also inhibited fungal interference. They were subjected to a microbe-rich environment, and after 3 days, the evaporation rates of the untreated chitosan scaffolds were obviously decreased to 1.24, 1.16 and 1.19 kg m^-2 h^-1 for C. albicans, S. aureus and E. coli, respectively, which were only 65.6, 61.4 and 63.0% of original performance (1.89 kg m^-2 h^-1). In comparison, the oak-inspired scaffold exhibited a high solar-driven water evaporation rate after incubation in microbial suspensions (1.80, 1.70 and 1.75 kg m^-2 h^-1 for C. albicans, S. aureus and E. coli after 3 days) and lake water (1.74 kg m^-2 h^-1 after one month). The bioinspired anti-biofouling scaffolds maintain as high as 86.7-91.8% of the solar-driven water evaporation ability after exposure to a microbe-rich environment, which is conducive to develop a biomimetic long-term durable structure in water treatment.

The Right Place at the Right Time: Seasonal Variation of Bacterial Communities in Arid Avicennia marina Soils in the Red Sea Is Specific to Its Position in the Intertidal

Mangrove forests play an important role in facilitating biogeochemical pathways and cycling acting as blue carbon sinks. These services are primarily regulated by the activity of the soil microbiome. However, there is still limited research into spatial and temporal variation patterns of bacterial community assemblages in mangrove soils. This study investigated important ecological scales of microprocesses that govern microbial communities in an arid mangrove ecosystem. Shifts in microbial community composition were influenced by fluctuations in environmental factors within the mangrove forests of the Red Sea influenced by seasonal changes in sea level. Notably, in summer microbial communities in shrub sites differed significantly from the fringe and the winter samples, with lower alpha diversity yet a higher dominance of specialized species capable of surviving in extreme conditions. The onset of dispersal limitation and heterogenous selection and the reduction of drift are likely the main forces shaping community assemblages. Specifically, in summer lower mean tidal levels eliminate tidal inundation creating a harsh high salinity and high temperature environment with no tidal connection thereby influencing the onset of dispersal limitation. An increased understanding of the spatial and temporal variation of bacterial communities is critical when assessing delivery of ecosystem services and their role in soil biogeochemical processes.

The Microbial Mechanisms of a Novel Photosensitive Material (Treated Rape Pollen) in Anti-Biofilm Process under Marine Environment

Marine biofouling is a worldwide problem in coastal areas and affects the maritime industry primarily by attachment of fouling organisms to solid immersed surfaces. Biofilm formation by microbes is the main cause of biofouling. Currently, application of antibacterial materials is an important strategy for preventing bacterial colonization and biofilm formation. A natural three-dimensional carbon skeleton material, TRP (treated rape pollen), attracted our attention owing to its visible-light-driven photocatalytic disinfection property. Based on this, we hypothesized that TRP, which is eco-friendly, would show antifouling performance and could be used for marine antifouling. We then assessed its physiochemical characteristics, oxidant potential, and antifouling ability. The results showed that TRP had excellent photosensitivity and oxidant ability, as well as strong anti-bacterial colonization capability under light-driven conditions. Confocal laser scanning microscopy showed that TRP could disperse pre-established biofilms on stainless steel surfaces in natural seawater. The biodiversity and taxonomic composition of biofilms were significantly altered by TRP (p < 0.05). Moreover, metagenomics analysis showed that functional classes involved in the antioxidant system, environmental stress, glucose−lipid metabolism, and membrane-associated functions were changed after TRP exposure. Co-occurrence model analysis further revealed that TRP markedly increased the complexity of the biofilm microbial network under light irradiation. Taken together, these results demonstrate that TRP with light irradiation can inhibit bacterial colonization and prevent initial biofilm formation. Thus, TRP is a potential nature-based green material for marine antifouling.

A review on marine plastisphere: biodiversity, formation, and role in degradation

The pollution of plastic waste has become an increasingly serious environmental crisis. Recently, plastic has been detected in various kinds of environments, even in human tissues, which is an increasing threat to the ecosystems and humans. In the ocean, the plastic waste is eventually fragmentized into microplastics (MPs) under the disruption of physical and chemical processes. MPs are colonized by microbial communities such as fungi, diatoms, and bacteria, which form biofilms on the surface of the plastic called “plastisphere”. In this review, we summarize the studies related to microorganisms in the plastisphere in recent years and describe the microbial species in the plastisphere, mainly including bacteria, fungi, and autotrophs. Secondly, we explore the interactions between MPs and the plastisphere. The depth of MPs in the ocean and the nutrients in the surrounding seawater can have a great impact on the community structure of microorganisms in the plastisphere. Finally, we discuss the types of MP-degrading bacteria in the ocean, and use the “seed bank” theory to speculate on the potential sources of MP-degrading microorganisms. Challenges and future research prospects are also discussed.

The Succession of Bacterial Community Attached on Biodegradable Plastic Mulches During the Degradation in Soil

Despite the increasing application of biodegradable plastic mulches (BDMs) in agriculture, the colonization and succession of the attached microbial community on BDMs during their degradation processes remain poorly characterized. Here, we buried four types of commonly used BDMs, including pure polylactic acid (PLA), pure polybutylene adipate terephthalate (PBAT), and two mixtures of PLA and PBAT (85:15 and 15:85 w/w), and one classic polyethylene (PE) mulch in soil for 5 months. Both plastic components and incubation time significantly shaped the β-diversities of microbiota on the plastic mulches (p < 0.001). Meanwhile, the microbial compositions and community structures on BDMs were significantly different from PE mulch, and when excluding PE mulch, the microbiota varied more with time than by the composition of the four BDMs. The orders Burkholderiales and Pseudonocardiales were dominant on most BDMs across different time points. The genus Ramlibacter was revealed as a common biomarker for both PLA and PBAT by random-forest model, and all biomarkers for the BDMs belonged to the dominant order Burkholderiales. In addition, degradation-related and pathogen-related functional taxa were enriched in all mulches among all 40 functional groups, while surprisingly, potential pathogens were detected at higher levels on BDMs than PE. For community assembly on all mulches, the drift and dispersal processes played more important roles than selection, and in particular, the contribution of stochastic drift increased during the degradation process of BDMs while selection decreased, while the opposite trend was observed with PE mulch. Overall, our results demonstrated some degradation species and pathogens were specifically enriched on BDMs, though stochastic processes also had important impacts on the community assembly. It suggested that, similar to conventional plastic mulch, the increased usage of BDMs could lead to potential hazards to crops and human health.