Review on the criteria anticipated for the fabrication of highly efficient ZnO-based visible-light-driven photocatalysts

Hydrogen Production as a Clean Energy Carrier through Heterojunction Semiconductors for Environmental Remediation

Today, as a result of the advancement of technology and increasing environmental problems, the need for clean energy has considerably increased. In this regard, hydrogen, which is a clean and sustainable energy carrier with high energy density, is among the well-regarded and effective means to deliver and store energy, and can also be used for environmental remediation purposes. Renewable hydrogen energy carriers can successfully substitute fossil fuels and decrease carbon dioxide (CO2) emissions and reduce the rate of global warming. Hydrogen generation from sustainable solar energy and water sources is an environmentally friendly resolution for growing global energy demands. Among various solar hydrogen production routes, semiconductor-based photocatalysis seems a promising scheme that is mainly performed using two kinds of homogeneous and heterogeneous methods, of which the latter is more advantageous. During semiconductor-based heterogeneous photocatalysis, a solid material is stimulated by exposure to light and generates an electron–hole pair that subsequently takes part in redox reactions leading to hydrogen production. This review paper tries to thoroughly introduce and discuss various semiconductor-based photocatalysis processes for environmental remediation with a specific focus on heterojunction semiconductors with the hope that it will pave the way for new designs with higher performance to protect the environment.

Self-assembling of 3D layered flower architecture of BiOI modified MgCr2O4 nanosphere for wider spectrum visible-light photocatalytic degradation of rhodamine B and malachite green: Mechanism, pathway, reactive sites and toxicity prediction

In this study, 3D BiOI nanoparticle (BOI NPs) modified MgCr₂O₄ nanoparticle (MCO NPs) was fabricated by simple sonochemical and coprecipitation method for the enhanced photocatalytic activity. The morphological structure of the MgCr₂O₄-BiOI nanocomposite (MCO-BOI NCs) was characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-visible diffuse reflectance spectroscopy (DRS), electron impedance spectroscopy (EIS) and photo luminescence (PL). The lower in the PL intensity and small arc in EIS for NCs shows the effective charge separation and lower in rate of recombination of charge carriers in NCs than the pure MCO and BOI NPs. The degradation efficiency of Rhodamine B (RhB) and malachite green (MG) by MCO-BOI NCs was found to be 99.5% and 98.2% receptivity. In addition, the photocatalytic degradation of RhB and MG was studied under various environmental parameters (different pH, varying the concentration of NCs and dyes) and response surface (RSM) plot was performed. The complete mineralization of RhB and MG by MCO-BOI NCs was determined by TOC. In addition, the photocatalytic degradation pathway was elucidated based on GC-MS results and Fukui function. In addition, the toxicity of intermediate formed during the degradation of RhB and MG was predicted by ECOSAR. The present work highlights the application of MCO-BOI NCs in environmental remediation for toxic pollutant removal.

Cobalt ferrite-modified sol-gel synthesized ZnO nanoplatelets for fast and bearable visible light remediation of ciprofloxacin in water

Currently, metal oxide photocatalysts is a green and facile tool for the elimination of emerging pollutants utilizing light illumination. Though, the wide bandgap energy (E_g), rapid recombination of photogenerated carriers, and photostability of these oxides represent critical issues before the actual application. Herein, we familiarise a sol-gel based synthesis of ZnO hexagonal nanoplatelets modified with CoFe₂O₄ (CFO) nanoparticles at minor loading (1.0-4.0 wt %) to yield CFO/ZnO nanoheterojunctions. The CFO/ZnO unveiled mesostructured surfaces at surface areas of 102-120 m² g^-1 and photoactive in the visible region with high. The CFO addition to ZnO reduced its E_g from 3.14 to 2.66 eV. The formed nanoheterojunctions were applied to remediate ciprofloxacin (CPF), as an antibiotic pollutant in wastewater. The 2.4 g L^-1 3.0 wt % CFO-added ZnO exhibited a 100% removal of 10-ppm CPF within 45 min of visible-light irradiation and sustainable recycling ability for five consecutive runs at 97%. The sustainable performance of CFO/ZnO is ascribed to the suppression of photogenerated carriers and reduction of E by p-n nanoheterojunction formation. This study broadens the way for nanoheterojunction oxides for the destruction of pharmaceutical wastes under visible-light illumination.

Synthesis, characterization of novel ZnO/CuO nanoparticles, and the applications in photocatalytic performance for rhodamine B dye degradation

Photocatalytic deg radation of environmental pollutants is being up to date for the treatment of contaminated water. In the present study, ZnO/CuO nanomaterials were successfully fabricated by a simple sol-gel method and investigate the photo-degradation of rhodamine B (RhB). The synthesized ZnO/CuO nanoparticles were characterized by X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-Vis diffuse reflectance spectroscopy (UV-Vis-DRS), thermal analysis (TGA), surface charge, and Fourier transform infrared spectroscopy (FTIR). The photo-degradation of the dye RhB was followed spectroscopically. The overall composition of ZnO/CuO material was found to be wurtzite phase, with particle size of 30 nm, and the Vis light absorption increased with an increase of Cu content. The ZnO/CuO nanomaterials were highly active leading to a photo-degradation of 10 ppm RhB reaching 98% within 180 min at 0.1 g/L catalyst dosage. The change in surface charge after degradation evaluated by ζ potential measurements and the differences in functional vibration group monitored by Fourier transform infrared spectroscopy (FTIR) indicates that the RhB adsorption on the Zn45Cu surface was insignificant. And scavenging experiments demonstrate that the RhB degradation by ZnO/CuO nanomaterials involves to some degree hydroxyl radicals.

Strategies to Enhance ZnO Photocatalyst's Performance for Water Treatment: A Comprehensive Review

Despite the photocatalytic organic pollutant degradation using ZnO started in 1910-1911, many challenges are still ahead, and several critical issues have to be addressed. Large band gap, and short life-time of photogenerated electrons and holes are critical issues negatively affect the photocatalytic activity of ZnO. Various approaches have been introduced to overcome these issues including intrinsic doping, extrinsic doping, and heterostructure. This review introduces unique and deep insights into tuning of the photocatalytic activity of ZnO. It starts by description of how to tune the photocatalytic activity of pristine ZnO through tuning its morphology, surface area, exposed face, and intrinsic defects. Afterward, the review explains how the Z-scheme approach succeed to address the redox weakened issue of heterojunction approach. In general, this review provides a clear image that helps the researcher to tune the photocatalytic activity of pristine ZnO and its heterostructure.

The role of size-controlled CeO2 nanoparticles in enhancing the stability and photocatalytic performance of ZnO in natural sunlight exposure

In order to enhance the photocatalytic performance and stability, the various proportions of the size controlled cerium oxide (CeO₂) nanoparticles were dispersed at the pre-synthesized ZnO. Although, the expected dual absorption onsets, probably due to the diminutive difference between the bandgaps of CeO₂ (∼2.9 eV) and ZnO (∼3.1 eV), were not observed however, a blue shift in the bandgap energy of ZnO was witnessed with the increasing surface density of CeO₂ particles. The delayed excitons recombination process with the increasing concentration of CeO₂ nanoparticles was verified by the PL spectra. The structural investigation by Raman and XRD analysis revealed the surface attachment of CeO₂ particles without altering the rock-salt lattice of ZnO. The morphological and fine microstructural analysis established the uniform distribution of evenly sized CeO₂ particles at the surface of ZnO with the discrete fringe patterns of both the entities whereas the XPS analysis confirmed the majority of Ce⁴⁺ in dispersed CeO₂. In comparison to pure ZnO, cyclic voltammetric (CV) analysis, under illumination, exposed the supportive role of surface residing CeO₂ particles in eradicating the photo-corrosion of ZnO whereas the chronopotentiometry (CP) predicted the prolonged life-span of the excitons. Compared to pure ZnO, an appreciably high activity was revealed for 10% CeO₂ loading as compared to pure ZnO for the removal of mono and di-nitrophenol derivatives and their mixtures under natural sunlight exposure. The variations in the removal rates in the mixture as compared to individual nitrophenol exposed the structure-based priority of ROS for the respective phenol. The significantly enhanced photocatalytic activity of the composite catalysts revealed the incremental role of surface-mounted CeO₂ entities in boosting the generation of ROS under sunlight irradiation. The experimental observations were correlated and compiled to establish the mechanism of the removal process.

Ration design of 0D/3D Sn3O4/NiS nanocomposite for enhanced photocatalytic hydrogen generation

Developing economic and high-performance noble-metal-free photocatalysts is the key to realize efficient photocatalysis. In this work, NiS nanoparticles and hierarchical Sn3O4 nanostructures are tightly bonded by a two-step method combining...

Facile and Green Fabrication of Microwave-Assisted Reduced Graphene Oxide/Titanium Dioxide Nanocomposites as Photocatalysts for Rhodamine 6G Degradation

Organic pollutants, such as synthetic dyes, are treated to prevent them from contaminating natural water sources. One of the treatment methods is advanced oxidation process using a photocatalyst material as the active agent. However, many photocatalysts are hindered by their production cost and efficiency. In this study, nanocomposites consisting of reduced graphene oxide and titanium dioxide (rGO/TiO2) were prepared by a simple and green approach using the microwave-assisted method, and we utilized a graphene oxide (GO) precursor that was fabricated through the Tour method. The ratios of rGO/TiO2 in nanocomposites were varied (2:1, 1:1, and 1:2) to know the influence of rGO on the photocatalytic performance of the nanocomposites for rhodamine 6G degradation. Transmission electron microscopy (TEM) observation revealed that a transparent particle with a sheetlike morphology was detected in the rGO sample, suggesting that a very thin film of a few layers of GO or rGO was successfully formed. Based on scanning electron microscopy (SEM) observation, the rGO/TiO2 nanocomposites had a wrinkled and layered rGO structure decorated by TiO2 nanoparticles with average diameters of 125.9 ± 40.6 nm, implying that rGO layers are able to prevent TiO2 from agglomeration. The synthesized product contained only rGO and TiO2 in the anatase form without impurities that were proven by Raman spectra and X-ray diffraction (XRD). The nanocomposite with rGO/TiO2 ratio 1:2 (composite C) was found to be the best composition in this study, and it was able to degrade 82.9 ± 2.4% of the rhodamine 6G after UV irradiation for 4 h. Based on a time-resolved photoluminescence study at wavelength emission 500 nm, the average decay lifetime of R6G-rGO/TiO2 composites (2.91 ns) was found to be longer than that of the R6G-TiO2 sample (2.05 ns), implying that the presence of rGO in rGO/TiO2 composites successfully suppressed the electron-hole recombination process in TiO2 and significantly improved their photocatalytic performance. This study showed that the rGO/TiO2 nanocomposites synthesized through relatively simple and eco-friendly processes display promising prospects for photocatalytic degradation of dyes and other recalcitrant pollutants in a water stream.

Highly efficient visible light active Cu-ZnO/S-g-C3N4 nanocomposites for efficient photocatalytic degradation of organic pollutants

The photocatalytic activity of photocatalysts is severely hampered by limited visible light harvesting and unwanted fast recombination of photogenerated e^- and h⁺. In the current study, the photocatalytic efficiency of Cu-ZnO/S-g-C₃N₄ (CZS) nanocomposites was investigated against MB dye. The composite materials were designed via chemical co-precipitation method and characterised by important analytical techniques. Distinctive heterojunctions developed between S-g-C₃N₄ and Cu-ZnO in the CZS composite were revealed by TEM. The synthesized composites exhibit a huge number of active sites, a large surface area, a smaller size and better visible light absorption. The considerable enhancement in the photocatalytic activity of CZS nanocomposites might be accredited to the decay in the e-h pair recombination rate and a red shift in the visible region, as observed by PL and optical analysis, respectively. Furthermore, the metal (Cu) doping into the S-g-C₃N₄/ZnO matrix created exemplary interfaces between ZnO and S-g-C₃N₄, and maximized the photocatalytic activity of CZS nanocomposites. In particular, CZS nanocomposites synthesized by integrating 25% S-g-C₃N₄ with 4% Cu-ZnO (CZS-25 NCs) exhibited the 100% photocatalytic degradation of MB in 60 minutes under sunlight irradiation. After six cycles, the photocatalytic stability of CZS-25 NCs was excellent. Likewise, a plausible MB degradation mechanism is proposed over CZS-25 NCs based on photoluminescence and reactive species scavenger test observation. The current research supports the design of novel composites for the photocatalytic disintegration of organic contaminants.

Novel VUV/g-C3N4 system with high adaptability to varied environmental conditions and outstanding degradation capacity for chlorophenols

Given the limitations of conventional vacuum ultraviolet (VUV) systems, a novel vacuum ultraviolet/graphite carbon nitride (VUV/g-C₃N₄) system with high adaptability to varying environmental conditions was developed. Compared with conventional VUV and UV/g-C₃N₄ systems, the VUV/g-C₃N₄ system demonstrates a much higher ability for the efficient degradation of chlorophenols (CPs). In particular, the VUV/g-C₃N₄ system exhibits outstanding performance even at low pH and high concentrations of humic acid and SO₄^2-. Alkaline conditions and the presence of HCO₃^- can further promote CP removal. In addition, the feasibility of the VUV/g-C₃N₄ system was verified by its stable operation in both river water and tap water. Unlike conventional photochemical systems relying on •OH, the dominant reactive species for CP degradation by the VUV/g-C₃N₄ system was identified to be •O₂^-. This study conclusively provided a novel system for the efficient photocatalytic treatment of pollutants.

In-situ fabrication of novel flower like MoS2/CoTiO3 nanorod heterostructures for the recyclable degradation of ciprofloxacin and bisphenol A under sunlight

Effectual degradation of toxic water contaminants is a crucial step in water purification and designing an efficient semiconductor based hybrid structure photocatalyst is a good approach to achieve this. Benefiting from the combination of semiconductors, a series of novel visible-light active flower-like MoS₂/CoTiO₃ nanorod heterostructures with excellent morphological contact interface were prepared through a facile in-situ hydrothermal process. These heterostructures were well characterized and demonstrated high photocatalytic performance for ciprofloxacin (CIP) and bisphenol A (BPA) under sunlight irradiation. Compared to pristine CoTiO₃ and MoS₂, the optimal catalyst (5 wt% MoS₂/CoTiO₃) presented 39.97 and 22.32 times higher activity for CIP degradation and 26.85 and 15.66 times higher activity for BPA degradation, respectively. This improved activity can be accounted for the effective interfacial contact which promotes the efficient charge carriers separation and reduce its recombination. The catalyst exhibited decent stability and was potentially reused for five cycles without significant loss in activity. Furthermore, based on active species scavenging experiments the plausible photodegradation mechanism is discussed in detail.

Crystalline ZnO Photocatalysts Prepared at Ambient Temperature: Influence of Morphology on p-Nitrophenol Degradation in Water

Since the Industrial Revolution, technological advances have generated enormous emissions of various pollutants affecting all ecosystems. The detection and degradation of pollutants has therefore become a critical issue. More than 59 different remediation technologies have already been developed, such as biological remediation, and physicochemical and electrochemical methods. Among these techniques, advanced oxidation processes (AOPs) have been popularized in the treatment of wastewater. The use of ZnO as a photocatalyst for water remediation has been developing fast in recent years. In this work, the goals are to produce ZnO photocatalysts with different morphologies, by using a green sol-gel process, and to study both the influence of the synthesis parameters on the resulting morphology, and the influence of these different morphologies on the photocatalytic activity, for the degradation of an organic pollutant in water. Multiple morphologies were produced (nanotubes, nanorods, nanospheres), with the same crystalline phase (wurtzite). The most important parameter controlling the shape and size was found to be pH. The photoactivity study on a model of pollutant degradation shows that the resulting activity is mainly governed by the specific surface area of the material. A comparison with a commercial TiO2 photocatalyst (Evonik P25) showed that the best ZnO produced with this green process can reach similar photoactivity without a calcination step.

One-pot construction of robust BiOCl/ZnO p-n heterojunctions with semi-coherent interfaces toward improving charge separation for photodegradation enhancement

Heterojunction engineering is an effective strategy to enhance the photodegradation activity via improving the spatial charge separation. However, the poor interface interactions and stability limit the photocatalytic activity and stability of traditional heterojunctions. Herein, robust BiOCl/ZnO p-n heterojunctions with semi-coherent interfaces were prepared by a one-pot hydrothermal method to improve the activity and stability toward photocatalytic degradation than that of the counterpart, in which the semi-coherent interfaces exhibited lower phase boundary energy, resulting in highly-stable interfaces between BiOCl and ZnO as well as the formation of the built-in electric field in this robust p-n heterojunction for enhanced charge separation. The cycle test results verified that the BiOCl/ZnO heterojunctions with semi-coherent interfaces can maintain the photocatalytic degradation activity at the initial level even after 10 cycles, while deactivation of the sample without semi-coherent interfaces occurred after 3 cycles only. Optical and electrical properties revealed that BiOCl/ZnO heterojunctions with semi-coherent interfaces possessed the highest electron migration and charge separation efficiency, resulting in the highest photodegradation activity. Density functional theory (DFT) calculations and electron spin-resonance (ESR) results verified that the enhanced charge separation was assigned to the type-II photocatalytic mechanism, leading to the enhancement of ˙OH and ˙O2 - reactive oxygen species. This work would provoke the development of one-step construction of new highly active BiOX (X = Cl, Br, and I)-based heterogeneous photocatalysts with stable semi-coherent interfaces.

Anisotropic ZnO nanostructures and their nanocomposites as an advanced platform for photocatalytic remediation

In pursuit of advanced heterogeneous photocatalysts, ZnO has emerged as a promising option for solar-driven heterogeneous photocatalyst with many advantageous properties (e.g., optical band structure and electronic properties). However, as the efficacy of such system can also be limited by a number of demerits (e.g., fast recombination of charge carriers and limited photon absorption), considerable efforts are needed for its effective and practical scale-up. This article provides a detailed literature review of the synthesis and modification of ZnO nanostructures with tuned band structures and controllable morphologies for solar light harvesting. The potential of anisotropic ZnO nanostructures is also discussed with respect to the photocatalytic degradation of organic/inorganic water pollutants. Further, the role of various metal dopants is discussed for the enhancement of photocatalytic activity along with evaluation of their photocatalytic performances under UV-visible or solar irradiation. Finally, our discussions are expanded to describe the prospects of developed ZnO nano-photocatalysts for real-world applications with respect to light-harvesting efficiency and mechanical stability.

Sunlight-assisted degradation of textile pollutants and phytotoxicity evaluation using mesoporous ZnO/g-C3N4 catalyst

Accessibility of adequate safe and fresh water for human consumption is one of the most significant issues throughout the world and extensive research is being undertaken to resolve it. Nanotechnology is now an outstanding medium for water treatment and remediation from microorganisms and organic dyes, as compared to conventional treatment methods. For this task graphitic carbon nitride (g-C3N4) is a potential nanomaterial for environmental remediation, but its photogenerated charge carrier recombination rate restricts its use in practical applications. Hence, in the current study, we used a simple one-step calcination method to synthesize various ratios of ZnO/g-C3N4 binary nanocomposites. The band gap of g-C3N4 is 2.70 eV, but it is shifted to 2.60 eV by the 0.75 : 1 ZnO/g-C3N4 binary nanocomposite. Moreover, phase structure, morphology, thermal stability, oxidation state, elemental analysis, and surface area were evaluated using XRD, SEM, TEM, TGA, XPS, and BET analysis. The optimal ZnO loading content was determined and the mechanism of enhanced photocatalytic activity was studied in detail. The photocatalytic efficiency of the best catalyst was employed for the degradation of textile effluent followed by phytotoxicity evaluation using methylene blue (MB), and rhodamine B (RhB) as a model substrate was tested. Furthermore, the textile effluent treatment analysis discovered that the 75 mg concentration of 0.75 : 1 ZnO/g-C3N4 catalyst degraded up to 80% within 120 min and significantly reduced the concentrations of different physico-chemical parameters of textile effluents. These treated effluents have no phytotoxic effects on fenugreek plants, according to a pot study. It was found that the mesoporous 0.75 : 1 ZnO/g-C3N4 catalyst can be used as an effective and low-cost technique for the degradation of azo dyes in textile wastewaters.

Novel CuO/Mn3O4/ZnO nanocomposite with superior photocatalytic activity for removal of Rabeprazole from water

In this work, a nanohybrid of CuO/Mn3O4/ZnO was generated through a simple hydrothermal based procedure. The CuO/Mn3O4/ZnO nanohybrid has been characterized using X-ray diffraction, transmission electron microscopy high resolution transmission electron microscopy, X-ray photoelectron spectroscopy, scanning electron microscopy and energy dispersive X-ray analysis. UV-visible spectrophotometry and photoluminescence techniques allowed evaluation of optical properties that additionally suggested the prevalence of strong interfacial interaction between the three moieties of the nanohybrid and suppressed electron-hole recombination. The hybrid photocatalyst brought on ~ 97.02 ± 1.15% disintegration of rabeprazole when illuminated with visible light. The progress of the photodegradation was in conformity with pseudo-first order kinetic model and had a velocity constant of 0.07773 min-1. Additionally, ~ 84.45% of total organic carbon removal was achieved while chemical oxygen demand was reduced by ~ 73.01%. Using high resolution liquid chromatograph mass spectrometry technique, identification of the degraded products was made and accordingly the mechanistic route of the aforesaid degradation was proposed.

Eco-friendly Mycogenic Synthesis of ZnO and CuO Nanoparticles for In Vitro Antibacterial, Antibiofilm, and Antifungal Applications

Mycogenic synthesis of medically applied zinc oxide (ZnO) and copper oxide (CuO) nanoparticles (NPs) were exploited using Penicillium chrysogenum. The biogenesis and capping processes of the produced nano-metals were conducted by functional fungal extracellular enzymes and proteins. The obtained ZnO-NPs and CuO-NPs were characterized. Also, the antibacterial activity and minimum inhibitory concentration (MIC) values of ZnO-NPs and CuO-NPs were determined. Also, antibiofilm and antifungal activities were investigated. Results have demonstrated the ability of the bio-secreted proteins to cape and reduce ZnO and CuO to hexagonal and spherical ZnO-NPs and CuO-NPs with particle size at 9.0-35.0 nm and 10.5-59.7 nm, respectively. Both ZnO-NPs and CuO-NPs showed high antimicrobial activities not only against Gram-positive and Gram-negative bacteria but also against some phytopathogenic fungal strains. Besides this, those NPs showed varied antibiofilm effects against different microorganisms. Quantitative and qualitative analyses indicated that CuO-NPs had an effective antibiofilm activity against Staphylococcus aureus and therefore can be applied in diverse medical devices. Thus, the mycogenic green synthesized ZnO-NPs and CuO-NPs have the potential as smart nano-materials to be used in the medical field to limit the spread of some pathogenic microbes.

Modulating oxygen vacancies on bismuth-molybdate hierarchical hollow microspheres for photocatalytic selective alcohol oxidation with hydrogen peroxide production

Photocatalytic selective oxidation of alcohols into high value-added carbonyl compounds accompanied by producing hydrogen peroxide (H₂O₂) is undoubtedly a more efficient solar energy conversion strategy with high atom economy. Herein, we have developed an efficient photocatalyst of bismuth-molybdate (Bi₂MoO₆) hierarchical hollow microspheres with tunable surface oxygen vacancies (OVs) for promoting the photocatalytic selective alcohol oxidation with H₂O₂ production. The effect of surface OVs on the photocatalytic efficiency is studied systematically by comparing the performance of different photocatalysts. The benzaldehyde and H₂O₂ production rates over the OV-rich Bi₂MoO₆ photocatalyst reach up to 1310 and 67.2 μmol g^-1 h^-1, respectively, which are 2.3 and 4.0 times those generated from the OV-poor Bi₂MoO₆ hollow microspheres. The roles of various active radicals in the photocatalytic reaction are probed by a series of controlled experiments and in situ ESR measurements, revealing that both superoxide radical (•O₂^-) and carbon-centered radical are the key active intermediates. The introduction of surface OVs on Bi₂MoO₆ hollow microspheres accelerates the separation and transfer of photo-generated charge carriers as well as enhances the adsorption and activation of reactant molecules, thereby greatly promoting the photocatalytic selective oxidation of alcohols along with H₂O₂ production. This work not only demonstrates a facile strategy for the preparation of high-efficiency photocatalysts by simultaneous modulations of morphology and surface defects, but also offers insight into developing the dual-functional photocatalytic reactions for the full utilizations of photoinduced electrons and holes.

Construction of S-scheme Bi2WO6/g-C3N4 heterostructure nanosheets with enhanced visible-light photocatalytic degradation for ammonium dinitramide

Photocatalysis technology is considered as a promising environmental remediation strategy. Herein, photocatalytic degradation of ammonium dinitramide (ADN, main component of propellant) was investigated over Bi₂WO₆/g-C₃N₄ (BWO/CN) heterostructure nanosheets prepared by a one-step in-situ hydrothermal method. The operating conditions including ADN initial concentration, catalyst dosage, initial pH, temperature and green oxidizer (hydrogen peroxide) were optimized systematically. Under optimal conditions, the photocatalytic degradation rate of ADN over BWO/CN can reach 98.93% after 80 min visible-light irradiation. Besides, the composite has excellent stability for ADN treatment and nitrate ions are the major degradation products. Furthermore, S-scheme heterojunction mechanism was proposed to explain the extremely high REDOX performance of BWO/CN composite.

Enhancement of photocatalytic degradation of Malachite Green using iron doped titanium dioxide loaded on oil palm empty fruit bunch-derived activated carbon

Iron-doped titanium dioxide loaded on activated carbon (Fe-TiO₂/AC) was successfully synthesized from oil palm empty fruit bunch (OPEFB) using sol-gel method. The properties of the synthesized pure TiO₂, Fe-doped TiO₂, AC, TiO₂/AC and Fe-TiO₂/AC were examined by various techniques such as field emission scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FT-IR), UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS) and nitrogen adsorption-desorption analyses at 77 K. FE-SEM revealed that Fe-doped TiO₂ particles were dispersed homogeneously on the AC surface. FT-IR demonstrated high surface hydroxylation after Fe doping on TiO₂ and UV-Vis DRS showed that Fe-TiO₂/AC had the lowest band gap energy. Catalytic performance results proved that Fe dopants could restrict the recombination rate of hole and electron pairs, whereas AC support improved the Malachite Green (MG) adsorption sites and active sites of the hybrid catalyst. Photocatalytic degradation of 100 mg/L MG in the presence of 1.0 g/L 15 wt% Fe-TiO₂ incorporated with 25 wt% AC, initial solution pH of 4 and 3 mM H₂O₂ could achieve the highest removal efficiency of 97% after 45 min light irradiation. This work demonstrates a promising approach to synthesis an inexpensive and efficient Fe-TiO₂/AC for the photocatalytic degradation of organic dye.

Wastewater remediation with ZnO photocatalysts: Green synthesis and solar concentration as an economically and environmentally viable route to application

Green-synthesized materials and solar concentration technology for advanced oxidation processes (AOPs) offer important opportunities in water remediation by giving value to clean, renewable and potentially low-cost resources. Here, Zinc Oxide (ZnO) nanostructures (NSs) were prepared via a green synthesis method based on garlic bulbs (Allium Sativum) extract (ZnO-Green), resulting in crystalline (wurtzite) nanorods (NRs). ZnO nanoparticles (NPs) were also chemically prepared through a standard co-precipitation (ZnO-Chem) for comparative solar photocatalytic (PC) studies. The green-synthesized ZnO NRs exhibited a favorable photocatalytic activity (PCA) in colloidal suspension for the methylene blue (MB) dye degradation upon exposure to concentrated sunlight. Comparison with the chemically synthesized ZnO results in almost equal degradations of 94% in optimal loading condition. To explore the possibility to use immobilized photocatalyst in heterogeneous condition, green-synthesized ZnO NRs coatings were fabricated and compared with a 135 nm thick ZnO thin film produced by pulsed laser deposition (PLD) (ZnO-PLD). PCA on MB degradation (120 min experiments) resulted in degradations of 69% and 73%, respectively, proving the feasibility of the immobilized photocatalyst approach. Finally, an economic analysis of the process shows that the combination of green-synthesis and concentrated sunlight significantly reduces costs, paving the way for large-scale photocatalytic wastewater remediation.

Doping of Mg on ZnO Nanorods Demonstrated Improved Photocatalytic Degradation and Antimicrobial Potential with Molecular Docking Analysis

Various concentrations of Mg-doped ZnO nanorods (NRs) were prepared using co-precipitation technique. The objective of this study was to improve the photocatalytic properties of ZnO. The effect of Mg doping on the structure, phase constitution, functional groups presence, optical properties, elemental composition, surface morphology and microstructure of ZnO was evaluated with XRD, FTIR, UV-Vis spectrophotometer, EDS, and HR-TEM, respectively. Optical absorption spectra obtained from the prepared samples showed evidence of blueshift upon doping. XRD results revealed hexagonal wurtzite phase of nanocomposite with a gradual decrease in crystallite size with Mg addition. PL spectroscopy showed trapping efficiency and migration of charge carriers with electron-hole recombination behavior, while HR-TEM estimated interlayer d-spacing. The presence of chemical bonding, vibration modes and functional groups at the interface of ZnO was revealed by FTIR and Raman spectra. In this study, photocatalytic, sonocatalytic and sonophotocatalytic performance of prepared NRs was systematically investigated by degrading a mixture of methylene blue and ciprofloxacin (MBCF). Experimental results suggested that improved degradation performance was shown by Mg-doped ZnO NRs. We believe that the product synthesized in this study will prove to be a beneficial and promising photocatalyst for wastewater treatment. Conclusively, Mg-doped ZnO exhibited substantial (p < 0.05) efficacy against gram-negative (G-ve) as compared to gram-positive (G+ve) bacteria. In silico molecular docking studies of Mg-doped ZnO NRs against DHFR (binding score: - 7.518 kcal/mol), DHPS (binding score: - 6.973 kcal/mol) and FabH (- 6.548 kcal/mol) of E. coli predicted inhibition of given enzymes as possible mechanism behind their bactericidal activity.

Construction of 1T-MoS2 quantum dots-interspersed (Bi1-x Fe x )VO4 heterostructures for electron transport and photocatalytic properties

The present study reports trigonal phase molybdenum disulfide quantum dots (MoS2/QDs)-decorated (Bi1-x Fe x )VO4 composite heterostructures. Initially, (Bi1-x Fe x )VO4 heterostructure nanophotocatalysts were synthesized through the hydrothermal method decorated with 1T-MoS2 via a sonication process. 1T-MoS2@(Bi1-x Fe x )VO4 heterostructures were characterized in detail for phase purity and crystallinity using XRD and Raman spectroscopy. The Raman mode evaluation indicated monoclinic, mixed monoclinic-tetragonal and tetragonal structure development with increasing Fe concentration. For physiochemical properties, SEM, EDX, XPS, PL, EPR, UV-visible and BET techniques were applied. The optical energy band gaps of 1T-MoS2@(Bi1-x Fe x )VO4 heterostructures were calculated using the Tauc plot method. It shows a blue shift initially within a monoclinic structure then a red shift with an increase of Fe concentration. 1T-MoS2@(Bi40Fe60)VO4 with 2 wt% of 1T-MoS2-QDs carrying a mixed phase exhibited higher photocatalytic activity. The enhanced photocatalytic activity is attributed to the higher electron transportation from (Bi1-x Fe x )VO4 surface onto 1T-MoS2 surface, consequently blocking the fast electron-hole recombination within (Bi1-x Fe x )VO4. 1T-MoS2 co-catalyst interaction with (Bi1-x Fe x )VO4 enhanced the light absorption in the visible region. The close contact of small 1T-MoS2-QDs with (Bi1-x Fe x )VO4 develops a high degree of crystallinity, with fewer defects showing mesoporous/nanoporous structures within the heterostructures which allows more active sites. Herein, the mechanism involved in the synthesis of heterostructures and optimum conditions for photocatalytic degradation of crystal violet dye are explored and discussed thoroughly.