EDTA-functionalized KCC-1 and KIT-6 mesoporous silicas for Nd3+ ion recovery from aqueous solutions

Suppressing Defect Formation in Metal-Organic Framework Membranes via Plasma-Assisted Synthesis for Gas Separations

Metal-organic frameworks (MOFs) are considered as promising materials for membrane gas separations. Structural defects within a pure MOF membrane can considerably reduce its selectivity and possibly result in a nonselective separation. This work proposes a solution-phase synthesis with dielectric barrier discharge (DBD) plasma to suppress the formation of defects in the pure MOF membrane of CPO-8-BPY. Through comprehensive solid-state characterization with XRD, SEM, XPS, solid-state NMR, and XAFS, DBD plasma is demonstrated to facilitate deprotonation in the H₂aip linker, which leads to a smaller and more uniform particle size of CPO-8-BPY. The narrow grain size distribution effectively reduces the pinhole-type defects in the pure CPO-8-BPY membrane and endows it with good ideal selectivity for H₂/CH₄ (α_H2/CH4 = 28.2) and N₂/CH₄ (α_N2/CH4 = 5.4). The selectivity for H₂/CH₄ of this membrane from a mixed-gas permeation test is found to be 15.4. Molecular simulations are also performed to gain insights into the gas transport properties of this MOF. The results suggest that ligand rotation plays an important role in CPO-8-BPY when being applied to the membrane separation of N₂/CH₄.

Synthesis and characterization of hairy aminated nanocrystalline cellulose

HYPOTHESIS

The synthesis and characterization of aminated nanocrystalline cellulose (ANCC), a new member of the hairy nanocellulose family, is reported. Hairy nanocelluloses consist of a crystalline rod-like body with amorphous cellulose chains ("hairs") at both ends, on which various functional groups can be accommodated. In ANCC these groups are reactive primary amine groups, which are useful for bioconjugation- and Schiff base-centered modifications. We hypothesize that a two-step oxidation-reductive amination of cellulose fibers followed by hydrothermal treatment will result in the formation of rod-like hairy ANCC.

EXPERIMENTS

ANCC was prepared by converting the aldehyde groups in cellulose, introduced by a periodate oxidation, to primary amines using ammonia and sodium borohydride, followed by a hot water treatment, during which diamine modified cellulose fibers were converted to ANCC. ANCC was characterized by AFM, TEM, DLS, ELS, FTIR, NMR, XPS and conductometric titration. Antibacterial activity of ANCC was assessed by the viable cell counting method.

FINDINGS

ANCC, with an amine content of 5.5 mmol g^-1 is a bare nanocolloid (i.e. non-coated, without adsorbed polyelectrolytes or surfactants) which, as far as we know, has a positive charge density larger than any other bare cationic nanocolloid. It was observed that ANCC particles have a needle-like morphology with a width of ~ 5 nm and a length ~ 120 nm. DLS results proof that ANCC is hairy. Spectroscopic analysis confirmed the introduction of surface primary amine groups. ANCC showed promising bactericidal activities, against Gram-negative species due to their thinner and penetrable cell wall.

Removal of copper ions by functionalized biochar based on a multicomponent Ugi reaction

Copper is widely present in the natural environment and inevitably poses a risk to both human health and the natural environment. Biochar is an inexpensive, clean and sustainable sorbent material that can be used as a resource for copper removal, and there is interest in new ways to chemically treat biochar to tune its unique properties and modify its atomic structure. In this study, biochar was oxidized, and then polyethyleneimine (PEI) modified chitosan and carboxylated biochar were economically compounded through a multicomponent Ugi reaction to effectively remove Cu(ii). PEI enhances the adsorption of Cu(ii) within an optimum solution pH range of 3.5–5.5. The adsorption process follows a pseudo-second-order kinetic model. When the dosage of BC-NH2 was 4 g L⁻¹ and the temperature was 303 K, the maximum adsorption capacity calculated by the Langmuir model was 26.67 mg g⁻¹. The adsorption process of Cu(ii) on BC-NH2 was heat-trapping and spontaneous. BC-NH2 showed good selectivity for K⁺ and Mg²⁺, and BC-NH2 desorbed by NaOH showed better adsorption performance than H₂SO₄ in the adsorption–desorption cycle. Characterization by SEM, EDS, BET, FTIR, TGA and XPS showed successful coupling and that the amide group of BC-NH2 had chelated with Cu(ii). This atomically economical multicomponent Ugi reaction provides a new option for preparing composite materials that effectively remove heavy metals.

Polyethyleneimine-modified chitosan and carboxylated biochar were economically compounded by a multicomponent Ugi reaction to produce products rich in amide functional groups.

Aluminum-Based Surface Polymerization on Carbon Dots with Aggregation-Enhanced Luminescence

Aggregation-induced luminescence quenching of carbon nanodots (CDs) is the main obstacle for their applications in solid-state light emitting devices. Herein, we developed a one-step synthesis of solid-state emissive CDs with surface aluminum-based polymerization by adding AlCl₃ in citric acid and urea via a microwave-heating dehydration process. Due to the strong coordination ability of Al ions with N and O atoms, considerable steric hindrance of Al-based cross-linked polymerization was introduced on the surface of the CDs, which not only avoided aggregation of the green emissive carbon cores but also facilitated efficient energy transfer from the blue emissive polymerized surface to the green emissive carbon cores in aggregates, leading to enhanced green emissions with a photoluminescence quantum yield (PLQY) of 72.7% in the solid state.

Aqueous Nd3+ capture using a carboxyl-functionalized porous carbon derived from ZIF-8

A porous graphitic carbon was obtained via the pyrolysis of a zeolite imidazolate framework (ZIF-8) under Ar atmosphere. Then, the carbon was functionalized with carboxylic groups and applied for separation of neodymium ions (Nd³⁺) from water. The adsorbent (denoted as C-ZDC) was characterized by X-ray diffraction, N₂ adsorption-desorption isotherms, infrared spectroscopy, X-ray photoelectron spectroscopy, scanning and transition electron microscopies, thermogravimetric analysis, and Boehm titration. A practical adsorption equilibrium was attained within 4 h, and the adsorption isotherm at 25 °C revealed a maximum adsorption capacity of 175 mg/g, which is one of the highest values reported for different kinds of adsorbents. The adsorption kinetics and equilibrium isotherms were modeled, and the selectivity for Nd³⁺ over other metal ions was examined. From the effect of solution pH on the adsorption and material characterization results before and after adsorption, the high adsorption capacity of C-ZDC was ascribed to the formation of coordination bonds between Nd³⁺ ions and the -COOH groups. Further, the material was reusable for at least four adsorption-desorption cycles after a simple step of acid washing.

Nd(III) and Gd(III) Sorption on Mesoporous Amine-Functionalized Polymer/SiO2 Composite

The strong demand for rare-earth elements (REEs) is driven by their wide use in high-tech devices. New processes have to be developed for valorizing low-grade ores or alternative metal sources (such as wastes and spent materials). The present work contributed to the development of new sorbents for the recovery of rare earth ions from aqueous solutions. Functionalized mesoporous silica composite was synthesized by grafting diethylenetriamine onto composite support. The physical and chemical properties of the new sorbent are characterized using BET, TGA, elemental analysis, titration, FTIR, and XPS spectroscopies to identify the reactive groups (amine groups: 3.25 mmol N g-1 and 3.41 by EA and titration, respectively) and their mode of interaction with Nd(III) and Gd(III). The sorption capacity at the optimum pH (i.e., 4) reaches 0.9 mmol Nd g-1 and 1 mmol Gd g-1. Uptake kinetics are modeled by the pseudo-first-order rate equation (equilibrium time: 30-40 min). At pH close to 4-5, the sorbent shows high selectivity for rare-earth elements against alkali-earth elements. This selectivity is confirmed by the efficient recovery of REEs from acidic leachates of gibbsite ore. After elution (using 0.5 M HCl solutions), selective precipitation (using oxalate solutions), and calcination, pure rare earth oxides were obtained. The sorbent shows promising perspective due to its high and fast sorption properties for REEs, good recycling, and high selectivity.

Model Studies on the Formation of the Solid Electrolyte Interphase: Reaction of Li with Ultrathin Adsorbed Ionic-Liquid Films and Co3 O4 (111) Thin Films

In this work we aim towards the molecular understanding of the solid electrolyte interphase (SEI) formation at the electrode electrolyte interface (EEI). Herein, we investigated the interaction between the battery‐relevant ionic liquid (IL) 1‐butyl‐1‐methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (BMP‐TFSI), Li and a Co₃O₄(111) thin film model anode grown on Ir(100) as a model study of the SEI formation in Li‐ion batteries (LIBs). We employed mostly X‐ray photoelectron spectroscopy (XPS) in combination with dispersion‐corrected density functional theory calculations (DFT‐D3). If the surface is pre‐covered by BMP‐TFSI species (model electrolyte), post‐deposition of Li (Li⁺ ion shuttle) reveals thermodynamically favorable TFSI decomposition products such as LiCN, Li₂NSO₂CF₃, LiF, Li₂S, Li₂O₂, Li₂O, but also kinetic products like Li₂NCH₃C₄H₉ or LiNCH₃C₄H₉ of BMP. Simultaneously, Li adsorption and/or lithiation of Co₃O₄(111) to Li_nCo₃O₄ takes place due to insertion via step edges or defects; a partial transformation to CoO cannot be excluded. Formation of Co⁰ could not be observed in the experiment indicating that surface reaction products and inserted/adsorbed Li at the step edges may inhibit or slow down further Li diffusion into the bulk. This study provides detailed insights of the SEI formation at the EEI, which might be crucial for the improvement of future batteries.

Removal of As(V), Cr(VI) and Cu(II) using novel amine functionalized composite nanofiltration membranes fabricated on ceramic tubular substrate

Novel amine functionalized composite membranes were prepared over tubular ceramic substrate using facile dip-coating and cross-flow filtration approach. The two fabricated membranes, P-60S and P-60S-EDTA with polyethyleneimine (PEI) and EDTA-modified PEI as functional layers respectively, were characterized in terms of EDX, FTIR, XPS, FESEM, AFM and contact angle analyses which confirmed their stable physical and chemical structure for use in high pressure application. Clean water permeability and MWCO study revealed the superior permeability and rejection efficiency of the P-60S-EDTA compared to the P-60S membrane. Incorporation of bulky EDTA molecules in the membrane functional layer simultaneously decreased pore size and increased membrane hydrophilicity. The removal of As(V), Cr(VI) and Cu(II) heavy metals by both membranes were found to be highly pH dependent and overall rejection improved in case of P-60S-EDTA membrane [99.82% for Cu(II), 96.75% for As(V) and 97.22% for Cr(VI)]. Interestingly, rejection of As(V) and Cr(VI) was significantly improved in presence of Cu(II) due to volume resistance provided by EDTA-Cu(II) complex towards the passage of other heavy metal ions. Excellent stability of P-60S-EDTA membrane in continuous operation of 36 h in both ideal and practical water environment suggests its promising application in real field heavy metal contaminated waste water treatment.

Synthesis of EDTA-bridged CdS/g-C3N4 heterostructure photocatalyst with enhanced performance for photoredox reactions

Photocatalytic reactions represent a kind of green and sustainable chemical processes for organic transformations, but the efficiency is limited by the severe recombination and/or inadequate redox potentials of photoinduced charge carriers in photocatalysts. To address these issues, herein, the CdS-EDTA/g-C₃N₄ heterostructures were designed according to Z-scheme photocatalytic mechanism and synthesized by the hydrothermal growth of CdS on g-C₃N₄ nanoflakes with assistance of EDTA chelating agent. EDTA played multiple roles in the formation of CdS-EDTA/g-C₃N₄ heterostructure photocatalysts, such as controlling the morphology of CdS nanostructures, linking CdS and g-C₃N₄ together, and boosting the charge transfer between two semiconductors. The optimized CdS-EDTA/g-C₃N₄(10%) photocatalyst exhibited much higher activities toward the selective reduction of nitrophenol and the selective oxidation of benzyl alcohol, than those of CdS/g-C₃N₄ heterostructures without EDTA. The enhanced photocatalysis of CdS-EDTA/g-C₃N₄ can be ascribed to the efficient separation and suitable photoredox potentials of photoexcited charge carriers in the EDTA-bridged Z-scheme system. This work provides the inspiration for exploring inexpensive organic electron mediators for constructing all-solid-state Z-scheme photocatalysts and demonstrates the enhanced performance of Z-scheme photocatalysts for photoredox reactions of organic transformations.

Role of the metal surface on the room temperature activation of the alcohol and amino groups of p-aminophenol

We present a comparative study of the room-temperature adsorption of p-aminophenol (p-AP) molecules on three metal surfaces, namely Cu(110), Cu(111) and Pt(111). We show that the chemical nature and the structural symmetry of the substrate control the activation of the terminal molecular groups, which result in different arrangements of the interfacial molecular layer. To this aim, we have used in-situ STM images combined with synchrotron radiation high resolution XPS and NEXAFS spectra, and the results were simulated by DFT calculations. On copper, the interaction between the molecules and the surface is weaker on the (111) surface crystal plane than on the (110) one, favouring molecular diffusion and leading to larger ordered domains. We demonstrate that the p-AP molecule undergoes spontaneous dehydrogenation of the alcohol group to form phenoxy species on all the studied surfaces, however, this process is not complete on the less reactive surface, Cu(111). The Pt(111) surface exhibits stronger molecule-surface interaction, inducing a short-range ordered molecular arrangement that increases overtime. In addition, on the highly reactive Pt(111) surface other chemical processes are evidenced, such as the dehydrogenation of the amine group.

Adhesive Sponge Based on Supramolecular Dimer Interactions as Scaffolds for Neural Stem Cells

Improving cell-material interactions of nonadhesive scaffolds is crucial for the success of biomaterials in tissue engineering. Due to their high surface area and open pore structure, sponges are widely reported as absorbent materials for biomedical engineering. The biocompatibility and biodegradability of polysaccharide sponges, coupled with the chemical functionalities of supramolecular dimers, make them promising combinations for the development of adhesive scaffolds. Here, a supramolecular tactic based on (UPy)-modified polysaccharide associated with three-dimensional structure of sponges was developed to reach enhanced cellular adhesion. For this purpose, three approaches were examined individually in order to accomplish this goal. In the first approach, the backbone polysaccharides with noncell adhesive properties were modified via a modular tactic using UPy-dimers. Hereupon, the physical-chemical characterizations of the supramolecular sponges were performed, showing that the presence of supramolecular dimers improved their mechanical properties and induced different architectures. In addition, small-angle neutron scattering (SANS) measurements and rheology experiments revealed that the UPy-dimers into agarose backbone are able to reorganize in thinning aggregates. It is also demonstrated that the resulted UPy-agarose (AGA-UPy) motifs in surfaces can promote cell adhesion. Finally, the last approach showed the great potential for use of this novel material in bioadhesive scaffolds indicating that neural stem cells show a spreading bias in soft materials and that cell adhesion was enhanced for all UPy-modified sponges compared to the reference, i.e. unmodified sponges. Therefore, by functionalizing sponge surfaces with UPy-dimers, an adhesive supramolecular scaffold is built which opens the opportunity its use neural tissues regeneration.

Simultaneous extraction of permethrin diastereomers and deltamethrin in environmental water samples based on aperture regulated magnetic mesoporous silica

The aperture of KIT-6 can influence the recoveries of magnetic solid phase extraction.

Removal of Mercury (II) by EDTA-Functionalized Magnetic CoFe2O4@SiO2 Nanomaterial with Core-Shell Structure

In order to reduce the difficulty and risk of operation, decrease the preparation time and improve the adsorption performance of magnetic nano-silicon adsorbent with core-shell structure, a carboxylated CoFe₂O₄@SiO₂ was prepared by EDTA-functionalized method using a safe, mild and simple hydrothermal method. The results show that the prepared material of CoFe₂O₄@SiO₂-EDTA has a maximum adsorption capacity of 103.3 mg/g for mercury ions (Hg(II)) at pH = 7. The adsorption process of Hg(II) is a chemical reaction involving chelation and single-layer adsorption, and follows the pseudo-second-order kinetic and Langmuir adsorption isotherm models. Moreover, the removal of Hg(II) is a spontaneous and exothermic reaction. The material characterization, before and after adsorption, shows that CoFe₂O₄@SiO₂-EDTA has excellent recyclability, hydrothermal stability and fully biodegradable properties. To summarize, it is a potential adsorption material for removing heavy metals from aqueous solutions in practical applications.

EDTA-Functionalized Covalent Organic Framework for the Removal of Heavy-Metal Ions

The removal of heavy-metal ions from wastewater has drawn intense attention, because of their toxicity, bioaccumulation tendency, and persistency in nature. Adsorption is regarded as one of the most promising methods, because of its simplicity and efficiency. In the present work, we report the preparation of a novel EDTA-functionalized covalent organic framework (COF) for the removal of heavy-metal ions. First, a COF named TpPa-NO₂ was reduced to TpPa-NH₂ by using Na₂S₂O₄ as a reductant, and then EDTA dianhydride was grafted onto TpPa-NH₂ to obtain TpPa-NH₂@EDTA through post-modification. Both the COF morphology and structure remained unchanged after post-modification. The TpPa-NH₂@EDTA showed excellent performance in adsorbing different types of heavy-metal ions, such as soft Lewis acid (Ag⁺, Pd²⁺), hard Lewis acid (Fe³⁺, Cr³⁺), and borderline Lewis acid (Cu²⁺, Ni²⁺), and the removal efficiencies are all >85% within 5 min, because of the strong chelation effect of EDTA. The TpPa-NH₂@EDTA also showed high adsorption ability in a pH ≥3 environment and have an adsorption capacity of >50 mg/g for the six representative heavy-metal ions. This work provides a new idea for the application of COF materials in the removal of heavy-metal ions from wastewater.

Porous Covalent Organic Polymers Comprising a Phosphite Skeleton for Aqueous Nd(III) Capture

In order to meet the ever-increasing industrial demand for rare-earth elements (REEs), it is desirable to separate and recycle them at low concentrations from various sources including industrial and urban wastes. Here, we introduced phosphorus binding sites on the hydrophobic surface of a robust and high-surface area porous polymer backbone for environmentally benign and selective recovery of REEs via adsorption. For this purpose, two porous covalent organic polymer (COP) materials incorporated with in-built phosphite functionality (P-COP-1 and P-COP-2) were synthesized and applied for the adsorptive separation of Nd(III) ions from aqueous solution. A strategy to develop a series of P-COPs via a simple Friedel-Crafts reaction was introduced, and their application to the selective adsorption of REEs was explored for the first time. The newly synthesized P-COPs were amorphous and/or weakly crystalline and showed excellent chemical stability and large specific surface area with sufficient mesoporosity for enhanced diffusion of REE ions. P-COP-1 exhibited an exceptionally high Nd(III) adsorption capacity of 321.0 mg/g, corresponding to the stoichiometric ratio of P/Nd(III) = 1:0.7 and high selectivity of >86% over other competing transition and alkaline earth metal ions, whereas P-COP-2 gave a Nd(III) adsorption capacity of 175.6 mg/g at 25 °C and pH 5. Moreover, P-COP-1 showed a distribution coefficient value of 5.45 × 10⁵ mL/g, which is superior to other benchmark adsorbent materials reported so far. Finally, the P-COPs were reusable for a minimum of 10 cycles without deterioration in adsorption capacities.

Improving the size uniformity of dendritic fibrous nano-silica by a facile one-pot rotating hydrothermal approach

This article provides a facile, low-cost, and reproducible one-pot rotating hydrothermal approach to synthesize dendritic fibrous nano-silica with outstanding uniformity.