Polypseudorotaxanes and polyrotaxanes

Molecular Dynamics of Polyrotaxane in Solution Investigated by Quasi-Elastic Neutron Scattering and Molecular Dynamics Simulation: Sliding Motion of Rings on Polymer

In this study, we investigated the molecular dynamics of polyrotaxane (PR), composed of α-cyclodextrins (CDs) and a poly(ethylene glycol) (PEG) axial chain, in solution by means of quasi-elastic neutron scattering (QENS) measurements and full-atomistic molecular dynamics (MD) simulations. From QENS experiments, we estimated the diffusion coefficients of CD and PEG monomers in PR, which are in quantitative agreement with those obtained by MD simulations. By analyzing the simulation results, we succeeded, for the first time, in observing and quantifying the sliding motion of CD along a PEG chain. The diffusion coefficient for the sliding motion is almost 6 times lower than that of the translational diffusion of CD in PR at room temperature. The retardation of the sliding motion is caused by the energy barrier on PEG produced by molecular interactions between CD and PEG. We propose a simple equation to describe the diffusion coefficient of the sliding dynamics in PR by combining the Einstein-Stokes diffusion model and a one-dimensional jump diffusion model. This work provides a general strategy for the molecular designs to control the sliding motion in PR.

Accordion-Like Motion in Electrochemically Switchable Crown Ether/Ammonium Oligorotaxanes

Reversible oxidation reactions in electrochemically switchable oligorotaxanes with tetrathiafulvalene (TTF) decorated 24-crown-8 ether wheels generate intramolecular mixed-valence and radical-cation interactions between the wheels. This induces shuttling of the wheels and a contraction of inter-wheel distances. Further oxidation generates repulsive forces between the TTFs and maximizes the inter-wheel distances instead. These interactions and co-conformational changes were not observed for structurally similar controls in which acetyl groups along the axle prevent translational motion of the wheels. This operation mode of oligorotaxanes, which is reminiscent of an accordion-like motion, is promising for functional materials and nanodevices such as piston-type rotaxane motors.

Polyrotaxane-based biointerfaces with dynamic biomaterial functions

The molecular mobility of cyclic molecules (e.g.α-cyclodextrins) threaded along a linear polymer chain (e.g. poly(ethylene glycol)) in polyrotaxanes is a unique feature for biomaterials with dynamic functionality. Surfaces with molecular mobility can be obtained by introducing polyrotaxanes. The molecular mobility of polyrotaxane-based surfaces can be modulated by changing the number of threaded cyclic molecules and modifying their functional groups. Biological ligands modified with α-cyclodextrins exhibit increased multivalent interactions with their receptors due to the molecular mobility of the latter. Furthermore, polyrotaxane-based surfaces not only improve the initial response of cells via multivalent interactions, but also affect cytoskeleton formation and the inherent quality of cells, including differentiation. Such polyrotaxane surfaces can emerge as new biointerfaces that can adapt to the dynamic biological nature.

Synthesis of the Anionic Hydroxypropyl-β-cyclodextrin:Poly(decamethylenephosphate) Polyrotaxane and Evaluation of its Cholesterol Efflux Potential in Niemann-Pick C1 Cells

Niemann-Pick type C disease (NPC) is a lysosomal storage disease that is characterized by a progressive accumulation of unesterified cholesterol in the lysosomes leading to organ damage from cell dysfunction. Hydroxypropyl-β-cyclodextrin (HP-β-CD) is an attractive drug candidate for treating NPC, as it diminishes cholesterol accumulation in NPC cells. Systemic HP-β-CD treatment, however, is limited by rapid renal clearance. We designed a new anionic HP-β-CD polyrotaxane to act as a slow release formulation based on a polyalkylene phosphate core to improve the pharmacokinetics. The polyalkylene phosphate comprises hydrophobic decamethylene spacers linked by biodegradable anionic phosphodiester bonds. HP-β-CD was threaded onto this polymer first and α-CD afterwards to prevent burst release of the threaded HP-β-CD. Our findings show that HP-β-CD was slowly released from the watersoluble polyrotaxane over a 30 days period. The polyrotaxane provided persistently diminished cholesterol levels in NPC1 cells by 20% relative to untreated cells. These results demonstrate the therapeutic potential of this novel HP-β-CD polyrotaxane for the mobilization of aberrantly stored cholesterol in NPC1 cells.

Rotaxane-branched dendrimers with aggregation-induced emission behavior

By introducing a 9,10-distyrylanthrance (DSA) moiety as the core, we demonstrated the synthesis of a new family of rotaxane-branched dendrimers G1–G3 through the controllable divergent approach.

Intramolecular hydrogen bond directed distribution of conformational populations in the derivatives of N′-benzylidenebenzohydrazide

The extensive NMR investigations reveal the presence of E-isomers in the derivative of N′-benzylidenebenzohydrazide. The different conformer populations are controlled by the strength of intramolecular hydrogen bonds.

Adhesive supramolecular polymeric materials constructed from macrocycle-based host–guest interactions

This review describes recent progress in adhesive supramolecular polymeric materials constructed from macrocycle-based host–guest interactions.

Self-sorting assembly of a calixarene/crown ether polypseudorotaxane gated by ion-pairing

A polypseudorotaxane composed of a calix[5]arene-diammonium supramolecular polymer and dibenzo-24-crown-8 wheels self-assembles only in the presence of superweak counterions

Rotational isomerism of the amide units in rotaxanes based on a cyclic tetraamide and secondary ammonium ions

We describe the synthesis of [2]rotaxanes consisting of a macrocyclic tetraamide and mono- and bis-ammonium ions and their conformational isomerism.

Heterorotaxanes

Heterorotaxanes, in which at least two types of macrocycles were introduced as the wheel components in rotaxanes, have attracted more and more attention during the past few decades owing to their unique structural features and intriguing properties. The coexistence of varied macrocycles endows the resultant heterorotaxanes not only versatile shuttling and switching behaviors but also great potential for the construction of functional rotaxane systems for applications. In this feature article, a survey of the successful synthesis of heterorotaxanes will be provided based on the various strategies towards the synthesis of heterorotaxanes, i.e. orthogonal binding approach, self-sorting approach, cooperative capture approach, active metal template approach, etc.

Sliding Crosslinked Thermoresponsive Materials: Polypseudorotaxanes Made of Poly(N-Isopropylacrylamide) and Acrylamide-γ-Cyclodextrin

Novel polypseudorotaxanes (PPR) based on poly(N-isopropylacrylamide) (PNIPAAm) and acrylamide-γ-cyclodextrin (AγCD) are successfully synthesized. AγCD gives rise to sliding crosslinking systems and influences the thermoresponsive and swelling behavior of PNIPAAm hydrogels. Namely, their lower critical solution temperature (LCST) can be tuned up to 38°C, thus making the resulting materials of great interest in biomedical applications. Also, AγCD influences the thermal and mechanical properties of hydrogels, by affecting the T g and E modulus values.

Dynamic Hydrogels from Host-Guest Supramolecular Interactions

Hydrogel biomaterials are pervasive in biomedical use. Applications of these soft materials range from contact lenses to drug depots to scaffolds for transplanted cells. A subset of hydrogels is prepared from physical cross-linking mediated by host-guest interactions. Host macrocycles, the most recognizable supramolecular motif, facilitate complex formation with an array of guests by inclusion in their portal. Commonly, an appended macrocycle forms a complex with appended guests on another polymer chain. The formation of poly(pseudo)rotaxanes is also demonstrated, wherein macrocycles are threaded by a polymer chain to give rise to physical cross-linking by secondary non-covalent interactions or polymer jamming. Host-guest supramolecular hydrogels lend themselves to a variety of applications resulting from their dynamic properties that arise from non-covalent supramolecular interactions, as well as engineered responsiveness to external stimuli. These are thus an exciting new class of materials.

Construction of [2]rotaxane-based supramolecular polymers driven by wheel-stopper π⋯π interactions

A new strategy for supramolecular polymerization is designed and presented, which is based on the wheel-stopper charge-transfer interactions of [2]rotaxanes.

Cyclodextrin-based host–guest supramolecular hydrogel and its application in biomedical fields

CD-based host–guest supramolecular hydrogels and their potential biomedical application.

Ion-pair electrostatic attraction-enhanced donor–acceptor interactions between the prototypic 1,4-dialkoxybenzene-viologen binding mode in water

Intermolecular ion-pair electrostatic attraction was demonstrated to remarkably enhance the donor–acceptor interaction between prototypic 1,4-dialkoxybenzene and viologen in water.

Polyrotaxane-based systemic delivery of β-cyclodextrins for potentiating therapeutic efficacy in a mouse model of Niemann-Pick type C disease

Niemann-Pick type C (NPC) disease is a fatal metabolic disorder characterized by the lysosomal accumulation of cholesterol. Although 2-hydroxypropyl β-cyclodextrin (HP-β-CD) promotes the excretion of cholesterol and prolongs the life span in animal models of NPC disease, it requires extremely high dose. We developed acid-labile β-CD-based polyrotaxanes (PRXs) comprising multiple β-CDs threaded along a polymer chain capped with acid-cleavable stopper molecules for potentiating therapeutic efficacy of β-CD in NPC disease. The acid-labile PRXs dissociate under the acidic lysosomes and release threaded β-CDs in lysosomes, which promotes cholesterol excretion in NPC disease model cells at lower concentration than HP-β-CD. In this study, the therapeutic effect of the PRXs in a mouse model of NPC disease was investigated. Weekly administration of the PRXs significantly prolonged the life span and suppressed neurodegeneration in mice, even at a dose of 500mg/kg, a markedly lower dose than previously reported for HP-β-CD. Detailed analysis of tissue cholesterol revealed that PRX treatment markedly suppressed the tissue accumulation of cholesterol in the NPC mouse model, but did not alter cholesterol content in wild-type mice. Acid-labile PRX is therefore a promising candidate for potentiating the efficacy of β-CD in the treatment of NPC disease.

Pillararene-Based Aggregation-Induced-Emission-Active Supramolecular System for Simultaneous Detection and Removal of Mercury(II) in Water

Supramolecular polymers are polymers based on monomeric units held together with directional and reversible noncovalent interactions. Compared with traditional polymers, they possess better processability and better recycling properties, owing to their reversible monomer-to-polymer transition. Herein, we report the construction of a new supramolecular system through self-assembly of a thymine-substituted copillar[5]arene 1 and a tetraphenylethylene (TPE) derivative 2 in the presence of Hg²⁺. Copillar[5]arene 1 can coordinate with Hg²⁺ tightly through T-Hg²⁺-T pairings. On the other hand, 1 can bind with guest molecule 2 through host-guest interactions between the pillararene cavity and the nitrile moiety of 2. These joint interactions generate crisscrossed networks composed of 1, 2, and Hg²⁺, which eventually wrap into spherical nanoparticles. Due to the aggregation-induced emission (AIE) properties of 2, the formed supramolecular polymer exhibits strong fluorescence which renders convenient the detection of the Hg²⁺-containing nanoparticles and the subsequent removal procedure. Furthermore, the polymer precipitate can be readily isolated by simple treatment, and the pseudorotaxane 2 ⊂ 1 can be recycled and reused. Our study has demonstrated a practical strategy for the sensing and removal of heavy metal ions in water by the construction of supramolecular polymers.

Fluorescent Supramolecular Polymeric Materials

Fluorescent supramolecular polymeric materials are rising stars in the field of fluorescent materials not only because of the inherent optoelectronic properties originating from their chromophores, but also due to the fascinating stimuli-responsiveness and reversibility coming from their noncovalent connections. Especially, these noncovalent connections influence the fluorescence properties of the chromophores because their state of aggregation and energy transfer can be regulated by the assembly-disassembly process. Considering these unique properties, fluorescent supramolecular polymeric materials have facilitated the evolution of new materials useful for applications in fluorescent sensors, probes, as imaging agents in biological systems, light-emitting diodes, and organic electronic devices. In this Review, fluorescent supramolecular polymeric materials are classified depending on the types of main driving forces for supramolecular polymerization, including multiple hydrogen bonding, electrostatic interactions, π-π stacking interactions, metal-coordination, van der Waals interactions and host-guest interactions. Through the summary of the studies about fluorescent supramolecular polymeric materials, the status quo of this research field is assessed. Based on existing challenges, directions for the future development of this field are furnished.

Intramolecular Hydrogen Bonding Involving Organic Fluorine: NMR Investigations Corroborated by DFT-Based Theoretical Calculations

The combined utility of many one and two dimensional NMR methodologies and DFT-based theoretical calculations have been exploited to detect the intramolecular hydrogen bond (HB) in number of different organic fluorine-containing derivatives of molecules, viz. benzanilides, hydrazides, imides, benzamides, and diphenyloxamides. The existence of two and three centered hydrogen bonds has been convincingly established in the investigated molecules. The NMR spectral parameters, viz., coupling mediated through hydrogen bond, one-bond NH scalar couplings, physical parameter dependent variation of chemical shifts of NH protons have paved the way for understanding the presence of hydrogen bond involving organic fluorine in all the investigated molecules. The experimental NMR findings are further corroborated by DFT-based theoretical calculations including NCI, QTAIM, MD simulations and NBO analysis. The monitoring of H/D exchange with NMR spectroscopy established the effect of intramolecular HB and the influence of electronegativity of various substituents on the chemical kinetics in the number of organic building blocks. The utility of DQ-SQ technique in determining the information about HB in various fluorine substituted molecules has been convincingly established.

The single-molecule electrical conductance of a rotaxane-hexayne supramolecular assembly

Oligoynes are archetypical molecular wires due to their 1-D chain of conjugated carbon atoms and ability to transmit charge over long distances by coherent tunneling. However, the stability of the oligoyne can be an issue. Here we address this problem by two stabilization methods, namely sterically shielding endgroups, and rotaxination to produce an insulated molecular wire. We demonstrate the threading of a hexayne within a macrocycle to form a rotaxane and report measurements of the electrical conductance of this single supramolecular assembly within an STM break junction. The macrocycle is retained around the hexayne through the use of 3,5-diphenylpyridine stoppers at both ends of the molecular wire, which also serve as chemisorption contacts to the gold electrodes of the junction. Molecular conductance was measured for both the supramolecular assembly and also for the molecular wire in the absence of the macrocycle. The threaded macrocycle, which at room temperature is mobile along the length of the hexayne between the stoppers, has only a minimal impact on the conductance. However, the probability of molecular junction formation in a given break junction formation cycle is notably lower with the rotaxane. In seeking to understand the conductance behavior, the electronic properties of these molecular assemblies and the electrical behavior of the junctions have been investigated by using DFT-based computational methods.

Pillar[5]arene-based amphiphilic supramolecular brush copolymer: fabrication, controllable self-assembly and application in self-imaging targeted drug delivery

Supramolecular brush copolymers have attracted continuing interest due to their unusual architectures, fascinating properties, and potential applications in many fields involving smart stimuli-responsive drug delivery systems. Herein, the first pillararene-based amphiphilic supramolecular brush copolymer (P5-PEG-Biotin⊃PTPE) was constructed on the basis of the host-guest molecular recognition between a water-soluble pillar[5]arene (P5) and a viologen salt (M). P5-PEG-Biotin⊃PTPE self-assembled into supramolecular nanoparticles (SNPs), which were utilized as a self-imaging drug delivery vehicle by taking advantage of the aggregation-induced emission (AIE) effect. Encapsulation of anticancer drug doxorubicin (DOX) caused deactivation of the fluorescences of both the tetraphenylethene (TPE) and DOX chromophores due to the energy transfer relay (ETR) effect, mediated by Förster resonance energy transfer (FRET) and aggregation-caused quenching (ACQ). The release of loaded DOX molecules can be triggered by low pH and reductase, recovering the "silenced" fluorescence caused by the interruption of the ETR effect, achieving in situ visualization of the drug release process by observing the location and magnitude of the energy transfer-dependent fluorescence variation. The biotin ligands on the surfaces of the DOX-loaded SNPs act as targeting agents to deliver DOX preferentially to cancer cells over-expressing biotin receptor. In vitro studies demonstrated that the loading of DOX by this supramolecular nanomaterial exhibited selective cytotoxicity towards cancer cells over normal cells. The potency of this sophisticated supramolecular drug delivery system in cancer therapy was further evaluated in HeLa tumor-bearing mice. In vivo experiments confirmed that the DOX-loaded SNPs possess excellent antitumor efficacy with negligible systemic toxicity.

Polypseudorotaxane Constructed from Cationic Polymer with Cucurbit[7]uril for Controlled Antibacterial Activity

This letter is aimed to develop a general strategy to fabricate polypseudorotaxanes with controlled antibacterial activity based on cationic polymers. As a proof of concept, the commercially available antibacterial cationic polymer, ε-poly-l-lysine hydrochloride, was chosen for the demonstration. Using host-guest chemistry, cucurbit[7]uril (CB[7]), a water-soluble macrocyclic host, was employed to bind with the positive charge and hydrophobic component on ε-poly-l-lysine hydrochlorides for antibacterial regulation. In this way, by tuning the ratio of CB[7] to the cationic polymer, the antibacterial polypseudorotaxane can be obtained, and the antibacterial efficiency can be well tuned from 5% to 100%. This line of research will enrich the field of cationic polymers and polypseudorotaxanes with important functions on precise control over antibacterial activity.

Hydroxypropyl-β-CD vs. its α-homologue for a 3D modified polyrotaxane network formation and properties: the relationship between modified CD and polymer revealed through comparison

The threading mechanism of the hydroxypropyl-cyclodextrin (Hy-CD)/tetrahedron-like poly(ethylene glycol) (tetra-PEG) based host-guest complex and the relationship between Hy-CD and poly(ethylene oxide) (PEO) in the three-dimensional modified polyrotaxane (PR) formed by the complex were revealed through the comparison between Hy-β-CD/tetra-PEG and Hy-α-CD/tetra-PEG based systems from the macroscopic material view to the microscopic molecular view. The complexation between Hy-CD and tetra-PEG in water experiences a threading-dethreading-rethreading process which is controlled by the intermolecular interaction intensity or molecular hindrance depending on the feed ratio of Hy-CD to tetra-PEG. In the 3D modified PR, the methyl group of the Hy part on one Hy-CD can insert into the cavity of the adjacent Hy-CD and interacts with both the interior surface of the cavity and the PEO segment within the cavity if the cavity of Hy-CD is large enough. The threaded Hy-CD in the PR straightens the chain of PEO and suppresses the segment motion of the PEO. With the decrease of the cavity size of Hy-CD, the degree of suppression on the segment motion of PEO increases. Hy-CD threaded on the PEO chain can also deform when the 3D modified PR is compressed, and the degree of deformation increases with the increase of the cavity size of Hy-CD. These results of the modified CD/PEG based complex system set it apart from the unmodified CD/PEG based one, and reveal the structure-property relationship of this new type of Hy-CD/tetra-PEG based 3D modified PR material.

Nanoparticles assembled via pH-responsive reversible segregation of cyclodextrins in polyrotaxanes

Supramolecular polymers with monomers bound together by secondary interactions, such as polyrotaxanes (PRXs), consisting of alpha cyclodextrin (αCD) threaded onto poly(ethylene glycol) (PEG), have attracted interest as a result of their ability to overcome physical limitations present in conventional, covalently structured polymers. Herein, we describe the formation of pH-responsive supramolecular assemblies from carboxyethylester bearing αCD and PEG PRXs. These PRXs were formed using PEG of Mw 20 kDa and a threading degree of 28%. Upon charge neutralisation the threaded αCDs co-localise, resulting in aggregation of the PRXs and the formation of a suspension by self-assembly. This process is shown to be reversible and possible via the mobility of CDs along the PEG guest chain. As a result of the inherent properties of PRXs, such as enhanced multivalent interactions and degradation, these responsive supramolecular polymers are expected to be of interest in fields where PRX-based materials have already found application, including paints, self-healing materials, surface coatings, and polymer therapeutics.

Threading through Macrocycles Enhances the Performance of Carbon Nanotubes as Polymer Fillers

In this work, we study the reinforcement of polymers by mechanically interlocked derivatives of single-walled carbon nanotubes (SWNTs). We compare the mechanical properties of fibers made of polymers and of composites with pristine SWNTs, mechanically interlocked derivatives of SWNTs (MINTs), and the corresponding supramolecular models. Improvements of both Young's modulus and tensile strength of up to 200% were observed for the polystyrene-MINT samples with an optimized loading of just 0.01 wt %, while the supramolecular models with identical chemical composition and loading showed negligible or even detrimental influence. This behavior is found for three different types of SWNTs and two types of macrocycles. Molecular dynamics simulations show that the polymer adopts an elongated conformation parallel to the SWNT when interacting with MINT fillers, irrespective of the macrocycle chemical nature, whereas a more globular structure is taken upon facing with either pristine SWNTs or supramolecular models. The MINT composite architecture thus leads to a more efficient exploitation of the axial properties of the SWNTs and of the polymer chain at the interface, in agreement with experimental results. Our findings demonstrate that the mechanical bond imparts distinctive advantageous properties to SWNT derivatives as polymer fillers.

A Versatile Axle for the Construction of Disassemblage Rotaxanes

Rotaxanes are unique mechanical devices that hold great promise as sensors. We report on two new rotaxanes that contain an acid or base sensitive trigger and readily disassemble in a wide range of environments. Disassemblage was observed under TLC and ¹H-NMR analysis. The axle is highly charged, which enhances solubility in aqueous environments, and can be readily derivatized with sensor components. The trigger was swapped in a one-pot method, which is promising for the rapid production of a series of sensors.