Efficacy of carbonaceous nanocomposites for sorbing ionizable antibiotic sulfamethazine from aqueous solution

Selective adsorption and enhanced photodegradation of diclofenac in water by molecularly imprinted TiO2

In the paper, molecularly imprinted TiO₂ was prepared by surface molecularly imprinted technology and liquid phase deposition method for preferential removal of persistent toxic pollutants from complex environmental water. Diclofenac was selected as the template molecule and target for photodegradation study. The characterization results of SEM, TEM, FTIR and XRD showed that the TiO₂ film with imprinted diclofenac was successfully synthesized on the surface of TiO₂ particles. Meanwhile, the adsorption and photodegradation experiments also indicated that the molecularly imprinted TiO₂ had larger adsorption capacity, better selectivity and higher photodegradation performance for diclofenac than non-imprinted TiO₂. The primary active species and degradation pathways during photodegradation process were also elucidated according to radical capture experiments and UPLC-MS-TOF technology. The prepared molecularly imprinted TiO₂ has the advantages of efficient removal ability, high stability and environmental protection, so it has a wide application value in water treatment and water environmental restoration, especially when involved persistent toxic pollutants.

Sorption mechanisms of antibiotic sulfamethazine (SMT) on magnetite-coated biochar: pH-dependence and redox transformation

Sorption of sulfonamides (SAs) on magnetite-coated biochar (MBC) is a promising approach for the remediation of antibiotic contaminants, due to its extended adsorption capacity and irreversibility. However, the actual sorption mechanisms of SAs on MBC remain unclear and the gap in knowledge hinders understanding of the fate of SAs in soils or sediments. In this study, various MBCs were prepared under different pyrolysis temperatures, with batch sorption experiments conducted using SMT as the model pollutant. Results of a two-compartment kinetic model demonstrated that aromatic components of MBCs dominated slow-sorption mechanisms, whereas the embedded magnetite further accelerated fast-sorption due to H-bonding. Modification of BC with magnetite improved the distribution coefficient (K_d) and isotherm linearity of SMT. Multi-parameter model results indicated that the pH-dependence of SMT sorption on BCs and MBCs occurred via a dominant mechanism of π-bond assisted H-bonding. Compared to pristine BCs, the change in pH-dependent sorption characteristics of SMT on MBC results from the regulation of π-bonding and proton configuration. Simultaneous transformation of SMT to sulfate ions on BCs or MBCs was also observed. The degradation of SMT occurred because of persistent free radicals (PFRs) on BCs or the inherent redox of iron minerals on MBCs. However, the small fraction of SMT transformed on BCs or MBCs was not found to result in overestimation of SMT sorption. This study presents the critical mechanisms of SMT sorption on pyrochars and provides novel understanding of the fate of SMT on carbonaceous materials during practical remediation applications.

Adsorption behavior of Cd (II) on TEMPO-oxidized cellulose in inorganic/ organic complex systems

2,2,6,6-Tetramethylpiperidine-1-oxyl (TEMPO) was oxidized to produce TEMPO-oxidized cellulose (TOCS) with a nanofunctionalized surface and abundant carboxyl groups. In a batch experiment, three pH values (2, 5 and 7), three modes (single, binary and multiple systems), and systems with inorganic and organic materials were applied to explore the adsorption of coexisting metals and antibiotics on TOCS. The adsorption capacity of TOCS was substantially influenced by these factors, and the adsorption behaviors were also different in these systems. In general, the coordination behaviors and electrostatic attraction between Cd(II) and carboxyl groups were identified as the mechanism employed by the single system, while hydrophobic interactions, π interactions, hydrogen bonding and pore filling contributed to the adsorption of sulfonamides (SAs) on TOCS in the binary system. The bridging effect was determined to be the key mechanism; i.e., most Cd(II) and SAs in the form of [SA-Cd] complexes interacted with carboxyl groups, especially in the presence of high concentrations of Cd(II) and SAs. These adsorption behaviors were determined quantitatively by performing density functional theory (DFT) calculations. In addition, TOCS showed excellent adsorption capacity in a more complex interference system, and the maximum adsorption capacity was 5.83 mg/g.

Nanotechnology in Wastewater Management: A New Paradigm Towards Wastewater Treatment

Clean and safe water is a fundamental human need for multi-faceted development of society and a thriving economy. Brisk rises in populations, expanding industrialization, urbanization and extensive agriculture practices have resulted in the generation of wastewater which have not only made the water dirty or polluted, but also deadly. Millions of people die every year due to diseases communicated through consumption of water contaminated by deleterious pathogens. Although various methods for wastewater treatment have been explored in the last few decades but their use is restrained by many limitations including use of chemicals, formation of disinfection by-products (DBPs), time consumption and expensiveness. Nanotechnology, manipulation of matter at a molecular or an atomic level to craft new structures, devices and systems having superior electronic, optical, magnetic, conductive and mechanical properties, is emerging as a promising technology, which has demonstrated remarkable feats in various fields including wastewater treatment. Nanomaterials encompass a high surface to volume ratio, a high sensitivity and reactivity, a high adsorption capacity, and ease of functionalization which makes them suitable for application in wastewater treatment. In this article we have reviewed the techniques being developed for wastewater treatment using nanotechnology based on adsorption and biosorption, nanofiltration, photocatalysis, disinfection and sensing technology. Furthermore, this review also highlights the fate of the nanomaterials in wastewater treatment as well as risks associated with their use.

Removal of biological effects of organic pollutants in municipal wastewater by a novel advanced oxidation system

The Advanced Oxidation System (AOS) is a novel electrochemical advanced oxidation process that effectively removes bacterial and organic contaminants from wastewater. However, potential formation of secondary oxidative species may pose additional hazards to aquatic organisms living in the receiving water affected by the post-treatment effluent. The effect of exposure to AOS treated water, especially the potential long-term effects on aquatic organisms, requires further investigation to demonstrate both efficacy and safety of this process. To examine the potential adverse effects of AOS treated water, three aquatic species, including daphnia, zebrafish, and rainbow trout, were exposed to treated and untreated municipal wastewater effluent (MWE) spiked with one of two model organic contaminants, benzo[a]pyrene (BaP) and 17β-estradiol (E2). The results indicated AOS treatment significantly reduced the adverse effects caused by exposure to MWE and model organic contaminants to baseline levels in daphnia (reduced fecundity), zebrafish embryo (elevated EROD activity), and rainbow trout (elevated plasma vitellogenin). The Ames test was also conducted to confirm the removal efficacy of carcinogenicity of BaP spiked in MWE. Overall, this study demonstrated that AOS treatment is a promising and environmentally friendly technology for wastewater treatment, remediation, and management.

Defect-rich porous carbon with anti-interference capability for adsorption of bisphenol A via long-range hydrophobic interaction synergized with short-range dispersion force

Wastewater features-directed design of an adsorbent is promising but challenging strategy for sustainable remediation of actual bisphenol A (BPA)-polluted water. Herein, we report that the discarded cigarette butt-derived porous carbon (AC-800) exhibit high capacity (865 mg/g), rapid reaction rate (186.9 mg/g/min) and outstanding durability for adsorption of BPA. Different from the most reported carbon-based adsorbents, quantitative structure-activity relationship studies unveil that graphitic defect plays a crucial role in the improvement of adsorptivity. Further studies illuminate that π-π interactions, electrostatic attraction and hydrogen-bond interaction play a negligible role whereas long-range hydrophobic interaction synergized with short-range dispersion force make a substantial contribution to BPA adsorption on AC-800. Benefited from this unique adsorption mechanism, AC-800 features a remarkable anti-interference capability and realizes the efficient clean-up of BPA from actual wastewater with complex backgrounds. This work sheds new light on mechanistic insight into the BPA adsorption on carbon-based materials and develops a fit-for-purpose designed adsorbent toward green remediation of practical wastewater.

Heterogeneous Electro-Fenton as “Green” Technology for Pharmaceutical Removal: A Review

The presence of pharmaceutical products in the water cycle may cause harmful effects such as morphological, metabolic and sex alterations in aquatic organisms and the selection/development of organisms resistant to antimicrobial agents. The compounds’ stability and persistent character hinder their elimination by conventional physico-chemical and biological treatments and thus, the development of new water purification technologies has drawn great attention from academic and industrial researchers. Recently, the electro-Fenton process has been demonstrated to be a viable alternative for the removal of these hazardous, recalcitrant compounds. This process occurs under the action of a suitable catalyst, with the majority of current scientific research focused on heterogeneous systems. A significant area of research centres working on the development of an appropriate catalyst able to overcome the operating limitations associated with the homogeneous process is concerned with the short service life and difficulty in the separation/recovery of the catalyst from polluted water. This review highlights a present trend in the use of different materials as electro-Fenton catalysts for pharmaceutical compound removal from aquatic environments. The main challenges facing these technologies revolve around the enhancement of performance, stability for long-term use, life-cycle analysis considerations and cost-effectiveness. Although treatment efficiency has improved significantly, ongoing research efforts need to deliver economic viability at a larger scale due to the high operating costs, primarily related to energy consumption.

Recognition and selective extraction of poly-γ-glutamic acid based on molecular imprinting technology

Poly-γ-glutamic acid (γ-PGA) is one of the few bacterial polymers in nature with high added value of biodegradability. Especially, the traditional method of extracting γ-PGA is organic solvent extraction, etc., which has the disadvantages of low extraction rate and serious environmental pollution. With the expansion of γ-PGA industrial fermentation, an efficient and environmentally friendly method is required to be adopted. In this contribution, we report a novel method of separation of γ-PGA from fermentation broth based on molecular imprinting technology. The molecular imprinted polymer (MIP) was synthesized from chitosan (CS) and glutaraldehyde in the presence of γ-PGA. A nonimprinted polymer (NIP) was also synthesized by the same procedure in the absence of γ-PGA. The chemical structures and morphological structures of both MIP and NIP were examined by FTIR spectroscopy and scanning electron microscopy. The adsorption isotherms showed that the maximum adsorption capacity of MIP was 137.85 mg/g. The maximum adsorption capacity in the adsorption of NIP was 68.92 mg/g, which indicates that MIP shows specific selectivity for γ-PGA. A high saturated absorption capacity (Qmax=140.90 mg/g) was calculated from Freundlich isotherm equation. The imprinting factor of MIP was 4.76, indicating that MIP possess good recognition ability and selectivity for γ-PGA. The adsorption capacity decreased slightly (17.0%), which suggests the satisfactory reusability of γ-PGA after 5 cycles of reuse. Our study indicates that molecularly imprinted polymers present development prospects in the effective and selective separation of γ-PGA from fermentation broth compared with organic solvent precipitation.

Removal of sulfadiazine from aqueous solution by in-situ activated biochar derived from cotton shell

Phosphoric acid is used to in-situ activate biochar pyrolyzed by cotton shells to enhance the adsorption ability of sulfadiazine (SDZ). To confirm the optimum condition, different impregnation ratios and impregnation times were investigated. It was found that the biochar (BC) pyrolyzed under the condition of an impregnation ratio of 2.5 and an impregnation time of 6 h showed the highest performance for the removal of SDZ. The maximum adsorption ability was 86.89 mg/g at a temperature of 298 K. The pseudo-second-order model was used to disclose the adsorption process of SDZ by BCs. The experimental data were described by the Langmuir and Temkin isotherms at different temperatures. It was found that the sorption of SDZ was an exothermic process according to the thermomechanical analysis. The activated BC could be recycled for at least five times with a high removal rate of SDZ. Thus, activated BCs are regarded as promising adsorbents for SDZ removal.

Degradation of sulfamethazine by biochar-supported bimetallic oxide/persulfate system in natural water: Performance and reaction mechanism

The rapid development of aquaculture results in the increased concentrations and kinds of antibiotics in water environment, and the sharply growing antibiotic contamination has caused increasing concerns. Herein, an innovative sulfamethazine (SMT) removal approach was developed by activation of persulfate (PS) using biochar-based materials prepared by co-precipitation and pyrolysis: Fe-Mg oxide/biochar (FeMgO/BC). Experiments on the activation of PS by FeMgO/BC under different factors were carried out. The involved mechanism and degradation pathway were also studied. Notably, the SMT removal rate reached 99 % under the optimum reaction condition, while the TOC removal efficiency reached 77.9 %. PS was activated by FeMgO/BC and the dominated active radical was SO_4•^-. Fe²⁺ from FeMgO and the hydroxyl and carboxyl groups on the surface of biochar contributed to the production of SO_4•^-. The dehydrogenation, bond cracking and unsaturated bond addition process occurred in the degradation of SMT. Furthermore, FeMgO/BC exhibits excellent reusability and stability. Considering the outstanding actual water application performances and the weak biotoxicity, FeMgO/BC shows a promising potential in the removal of antibiotics under actual water conditions.

Green preparation of activated carbon from pomegranate peel coated with zero-valent iron nanoparticles (nZVI) and isotherm and kinetic studies of amoxicillin removal in water

In present research, the activated carbon was prepared by a green approach from pomegranate peel coated with zero-valent iron nanoparticles (AC-nZVI) and developed as adsorbent for the removal of amoxicillin from aqueous solution. The physicochemical properties of the AC-nZVI were investigated using XRD, FTIR, and FESEM techniques. The optimal values of the parameters for the best efficiency (97.9%) were amoxicillin concentration of 10 mg/L, adsorbent dose of 1.5 g/L, time of 30 min, and pH of 5, respectively. The adsorption equilibrium and kinetic data were fitted with the Langmuir monolayer isotherm model (qmax 40.282 mg/g, R² 0. 0.999) and pseudo-first order kinetics (R² 0.961). The reusability of the adsorbent also revealed that the adsorption efficiency decreased from 83.54 to 50.79% after five consecutive repetitions. Overall, taking into account the excellent efficiency, availability, environmental friendliness, and good regeneration, AC-nZVI can be introduced as a promising absorbent for amoxicillin from aquatic environments.

Recent advances in application of graphitic carbon nitride-based catalysts for degrading organic contaminants in water through advanced oxidation processes beyond photocatalysis: A critical review

Advanced oxidation processes (AOPs) have attracted much interest in the field of water treatment owing to their high removal efficiency for refractory organic contaminants. Graphitic carbon nitride (g-C₃N₄)-based catalysts with high performance and cost effectiveness are promising heterogeneous catalysts for AOPs. Most research on g-C₃N₄-based catalysts focuses on photocatalytic oxidation, but increasingly researchers are paying attention to the application of g-C₃N₄-based catalysts in other AOPs beyond photocatalysis. This review aims to concisely highlight recent state-of-the-art progress of g-C₃N₄-based catalysts in AOPs beyond photocatalysis. Emphasis is made on the application of g-C₃N₄-based catalysts in three classical AOPs including Fenton-based processes, catalytic ozonation and persulfates activation. The catalytic performance and involved mechanism of g-C₃N₄-based catalysts in these AOPs are discussed in detail. Meanwhile, the effect of water chemistry including pH, water temperature, natural organic matter, inorganic anions and dissolved oxygen on the catalytic performance of g-C₃N₄-based catalysts are summarized. Moreover, the reusability, stability and toxicity of g-C₃N₄-based catalysts in water treatment are also mentioned. Lastly, perspectives on the major challenges and opportunities of g-C₃N₄-based catalysts in these AOPs are proposed for better developments in the future research.

Fabrication, characterization, and application of ternary magnetic recyclable Bi2WO6/BiOI@Fe3O4 composite for photodegradation of tetracycline in aqueous solutions

We aim at fabricating a ternary magnetic recyclable Bi₂WO₆/BiOI@Fe₃O₄ composite that could be applied for photodegradation of tetracycline (TC) from synthetic wastewater. To identify any changes with respect to the composite's morphology and crystal structure properties, ΧRD, FTIR, FESEM-EDS, PL and VSM analyses are carried out. The effects of Fe₃O₄ loading ratio on the Bi₂WO₆/BiOI for TC photodegradation are evaluated, while operational parameters such as pH, reaction time, TC concentration, and photocatalyst's dose are optimized. Removal mechanisms of the TC by the composite and its photodegradation pathways are elaborated. With respect to its performance, under the same optimized conditions (1 g/L of dose; 5 mg/L of TC; pH 7; 3 h of reaction time), the Bi₂WO₆/BiOI@5%Fe₃O₄ composite has the highest TC removal (97%), as compared to the Bi₂WO₆ (63%). After being saturated, the spent photocatalyst could be magnetically separated from solution for subsequent use. In spite of three consecutive cycles with 71% of efficiency, the spent composite still has reasonable photocatalytic activities for reuse. Overall, this suggests that the composite is a promising photocatalyst for TC removal from aqueous solutions.

Biochar-mediated Fenton-like reaction for the degradation of sulfamethazine: Role of environmentally persistent free radicals

Swine manure biochar (SBC) pyrolyzed at 300 °C, 600 °C and 900 °C were utilized to degrade sulfamethazine (SMT) in heterogeneous Fenton-like systems which achieved excellent degradation efficiency (over 85% in 30 min). Experiments results demonstrated that SBC possessed the poor SMT adsorption capacity but high catalytic performance. Electron Paramagnetic Resonance (EPR) and X-ray photoelectron spectroscopy (XPS) analysis revealed that there were oxygen-centered environmentally persistent free radicals (EPFRs) and carbon-centered EPFRs with an adjacent oxygen atom in SBC. The oxygen-centered EPFRs played a major role in the catalytic process which tended to convert to carbon-centered EPFRs after the reaction. Besides, the electron transfer pathways were the most likely catalytic mechanism of SBC and the contribution of OH was dominant through Electron capture experiments and Linear sweep voltammetry (LSV) measurements. The acidic or alkaline condition can promote the catalytic ability of SBC. The presence of dissolved salts (NaCl) inhibited the catalytic process but the inhibition was slightly weakened at high concentration of NaCl, which showed the high tolerance of Cl^- in Fenton/Fenton-like systems. Moreover, real wastewater application suggested that SBC600/H₂O₂ system possessed excellent catalytic efficiency and good adaptability. This research provides a novel swine manure reuse process with high practicability and presents a more explicit perspective about the reaction mechanisms of EPFRs in biochar.

Sustainable hydrogen production by molybdenum carbide-based efficient photocatalysts: From properties to mechanism

Hydrogen is considered to be a promising energy carrier to solve the issue of energy crisis. Molybdenum carbide (Mo_xC) is the typical material, which has similar properties of Pt and thought to be an attractive alternative to noble metals for H₂ evolution. The study of Mo_xC as alternative catalyst for H₂ production is almost focused on electrocatalytic field, while the application of Mo_xC as a co-catalyst in photocatalytic H₂ evolution has received in-depth research in recent years. Particularly, Mo_xC exhibits significant enhancement in the H₂ production performance of semiconductors under visible light irradiation. However, a review discussing Mo_xC serving as a co-catalysts in the photocatalytic H₂ evolution is still absent. Herein, the recent progress of Mo_xC on photocatalytic H₂ evolution is reviewed. Firstly, the preparation methods including chemical vapor deposition, temperature programming, and organic-inorganic hybridization are detailly summarized. Then, the fundamental structure, electronic properties, and specific conductance of Mo_xC are illustrated to illuminate the advantages of Mo_xC as a co-catalyst for H₂ evolution. Furthermore, the different heterojunctions formed between Mo_xC and other semiconductors for enhancing the photocatalytic performance are emphasized. Finally, perspectives regarding the current challenges and the future research directions on the improvement of catalytic performance of Mo_xC-based photocatalysts are also presented.

Deep Learning Neural Network Approach for Predicting the Sorption of Ionizable and Polar Organic Pollutants to a Wide Range of Carbonaceous Materials

Most contaminants of emerging concern are polar and/or ionizable organic compounds, whose removal from engineered and environmental systems is difficult. Carbonaceous sorbents include activated carbon, biochar, fullerenes, and carbon nanotubes, with applications such as drinking water filtration, wastewater treatment, and contaminant remediation. Tools for predicting sorption of many emerging contaminants to these sorbents are lacking because existing models were developed for neutral compounds. A method to select the appropriate sorbent for a given contaminant based on the ability to predict sorption is required by researchers and practitioners alike. Here, we present a widely applicable deep learning neural network approach that excellently predicted the conventionally used Freundlich isotherm fitting parameters log K_F and n (R² > 0.98 for log K_F, and R² > 0.91 for n). The neural network models are based on parameters generally available for carbonaceous sorbents and/or parameters freely available from online databases. A freely accessible graphical user interface is provided.

A review on control factors of pyrolysis technology for plants containing heavy metals

The treatment of plants with heavy metals, whether they grow naturally in heavy metal contaminated soil or are used for remediation of heavy metal contaminated soil has attracted increasing attention. Pyrolysis is often used for the disposal of plants with heavy metals because it stabilizes heavy metals effectively and produces biochar. The resulting products of pyrolysis are in the form of solid components (char and ash), liquid components (bio-oil and tar), together with gas components (condensable and non-condensable vapor gas). The metal amount in the char or liquid and gaseous phases can be maximized or minimized via treating a plant feedstock containing heavy metals under different conditions. In addition, the potential risk of biochar produced from plants after pyrolysis becomes a research hotspot in the field of pyrolysis technology of plants containing heavy metals. Herein, we review current literatures that emphasize the influencing factors on the metal content in the biochar, liquid and gaseous phases, as well as the potential risk of biochar.

Enhanced visible-light photocatalytic degradation of tetracycline by a novel hollow BiOCl@CeO2 heterostructured microspheres: Structural characterization and reaction mechanism

A high-efficiency hollow BiOCl@CeO₂ heterostructured microspheres with type-II staggered-gap type was successfully synthesized by precipitation-hydrothermal process loaded with BiOCl nanoparticles on CeO₂ microspheres. XRD, FT-IR, EDS, SEM, HRTEM and XPS results show that the prepared materials have good crystallization, morphology and retain hollow spherical structure of CeO₂. Batch experiments indicate that the photocatalytic performance of BiOCl@CeO₂ towards Tetracycline (TC) is superior to pure BiOCl or CeO₂ owing to the distinctive hollow structures and the formed heterostructure between BiOCl and CeO₂. Cyclic experiment exhibits that the optimal BiOCl@CeO₂ photocatalyst can still photodegrade more than 80% of TC in 120 min after 4 cycles. Additionally, the reactive oxidation species (ROS) trapping experiments reveal that the critical ROS include photogenerated holes (h⁺) and superoxide radical anions (O^2-). Finally, the possible degradation pathways of TC and enhanced photodegradation mechanism was systematically discussed. On this basis, the hollow BiOCl@CeO₂ heterostructured microspheres provide a new alternative with great potential in efficient visible-light-driven photodegradation of persistent organic pollutants.

Phosphate-modified m-Bi2O4 enhances the absorption and photocatalytic activities of sulfonamide: Mechanism, reactive species, and reactive sites

Widespread usage of the sulfonamide class of antibiotics is causing increasing ecotoxicological concern, as they have the capacity to alter ambient ecosystems. Photocatalytic technology is an attractive yet challenging strategy for the degradation of antibiotics. For this work, the phosphate modification of m-Bi₂O₄ (Bi₂O₄-P) was prepared via a one-step hydrothermal process involving sodium bismuthate and sodium phosphate, which was employed for the degradation of sulfamethazine (SMZ) under visible light irradiation. The 0.5% Bi₂O₄-P exhibited excellent photocatalytic performance, which was 1.9 times that of pure m-Bi₂O₄. The photocatalytic degradation kinetics and mechanism of SMZ was investigated at different pH, whereupon it was revealed that m-Bi₂O₄-P exhibited improved SMZ adsorption and photocatalytic activities in contrast to pure m-Bi₂O₄. Compared with other four sulfonamide antibiotics, structures that contained additional methyl on the pyrimidine could be more easily attacked by phosphate modified m-Bi₂O₄. Reactive species (RS) scavenging experiments revealed that h⁺ was primarily responsible for the degradation of SMZ. Further studies of RS by ESR technology, and the results of photoelectrochemical properties showed phosphate-modified m-Bi₂O₄ could make greater use of photogenerated carriers, thereby producing additional RS. Based on the HRAM LC-MS/MS and the Frontier Molecular Orbital Theory, the degradation pathways of SMZ were proposed.

Adsorption Characteristics and Mechanism of Bisphenol A by Magnetic Biochar

In this paper, biochar (BC) was prepared from discarded grapefruit peel and modified to prepare magnetic biochar (MBC). Physical and chemical properties of BC and MBC were characterized, and the results showed that the type of iron oxide loaded by MBC was γ-Fe₂O₃. Compared with BC, MBC has a larger specific surface area and pore volume, with more oxygen-containing functional groups on the surface. BC and MBC were used to adsorb and remove endocrine-disrupting chemical (EDC) bisphenol A (BPA) from simulated wastewater. The results showed that the adsorption kinetics and adsorption isotherm of BPA adsorption by BC and MBC were mainly in accordance with the pseudo-second-order kinetics model and the Langmuir model. This indicates that the adsorption of BPA on BC and MBC is mainly a chemically controlled monolayer adsorption. Adsorption thermodynamics show that BC and MBC adsorption of BPA is a spontaneous exothermic reaction, and lowering the temperature is conducive to the adsorption reaction. The effect of solution pH on the adsorption of BPA by both was significant. The optimum pH for BC and MBC to absorb BPA was 6 and 3, respectively. The concentration of Na⁺ in the range of 0–0.10 mol·L⁻¹ can promote the adsorption of BPA to MBC. MBC loaded with γ-Fe₂O₃ not only has excellent magnetic separation ability, but can also reach about 80% of the initial adsorption capacity after four cycles of adsorption. By analyzing the adsorption mechanism, it was found that the H-bond and the π–π electron donor–acceptor interaction (EDA) were the main forces for BC and MBC to adsorb BPA.

A label-free and carbon dots based fluorescent aptasensor for the detection of kanamycin in milk

A novel label-free aptasensor for kanamycin detection was constructed using gold nanoparticles (AuNPs) as absorber to quench the fluorescence of carbon dots (CDs) via the inner filter effect (IFE). The strategy was mainly relied on the fact that the absorption spectra of AuNPs overlapped with the fluorescence excitation spectra of fluorophores as well as the specific binding capacity of Ky2 aptamer to kanamycin. Upon adding kanamycin antibiotic, the free aptamer sequences are firstly exhausted to form some complexes, which leads to AuNPs aggregation in high salt concentration. Consequently, the absorber's absorption spectrum changes and no longer overlaps with the fluorescence emission spectrum of the CDs, which results in obvious fluorescence recovery of the aptasensor. Herein, the effects of some vital parameters like the type and number of nanoparticles on the fluorescent aptasensor have been investigated. Under optimal conditions, the proposed aptasensor can detect kanamycin in a linear range of 0.04-0.24 μM, with a limit of detection (LOD) as low as 18 nM. Moreover, the further studies also validate the applicability of the proposed aptasensor in milk samples, revealing that it may have enormous potential utility for practical kanamycin detection in food products in the future.

Antimicrobial efficacy and mechanisms of silver nanoparticles against Phanerochaete chrysosporium in the presence of common electrolytes and humic acid

In this study, influences of cations (Na⁺, K⁺, Ca²⁺, and Mg²⁺), anions (NO₃^-, Cl^-, and SO₄^2-), and humic acid (HA) on the antimicrobial efficacy of silver nanoparticles (AgNPs)/Ag⁺ against Phanerochaete chrysosporium were investigated by observing cell viability and total Ag uptake. K⁺ enhanced the antimicrobial toxicity of AgNPs on P. chrysosporium, while divalent cations decreased the toxicity considerably, with preference of Ca²⁺ over Mg²⁺. Impact caused by a combination of monovalent and divalent electrolytes was mainly controlled by divalent cations. Compared to AgNPs, however, Ag⁺ with the same total Ag content exhibited stronger antimicrobial efficacy towards P. chrysosporium, regardless of the type of electrolytes. Furthermore, HA addition induced greater microbial activity under AgNP stress, possibly originating from stronger affinity of AgNPs over Ag⁺ to organic matters. The obtained results suggested that antimicrobial efficacy of AgNPs was closely related to water chemistry: addition of divalent electrolytes and HA reduced the opportunities directly for AgNP contact and interaction with cells through formation of aggregates, complexes, and surface coatings, leading to significant toxicity reduction; however, in monovalent electrolytes, the dominating mode of action of AgNPs could be toxic effects of the released Ag⁺ on microorganisms due to nanoparticle dissolution.

Nitrogen doped char from anaerobically digested fiber for phosphate removal in aqueous solutions

This study explores the use of an engineered char produced from the pyrolysis of anaerobically digested fiber (ADF) to adsorb phosphate from aqueous solutions. Two series of engineered chars were produced. The first series was a CO₂ activated (CA) char produced via slow pyrolysis between 350 and 750 °C. The second series was a nitrogen doped (ND) char activated in the presence of ammonia at comparable temperatures. Proximate analysis, elemental composition, gas physisorption, Inductively coupled plasma mass spectrometry (ICP-MS), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier Transform Infrared Spectroscopy (FTIR) and X-ray powder diffraction (XRD) techniques were used to characterize properties of resulting products. The surface area of the carbon product increased after nitrogen doping through ammonization (166.6-463.1 m²/g) compared to CO₂ activated chars (156.5-413.1 m²/g). Phosphate adsorption isotherms for both CO₂ activated and nitrogen doped chars can be described by the Langmuir- Freundlich and Redlich Peterson adsorption models. Nitrogen doped carbon phosphate sorption capacity in aqueous solutions was twice compared to CO₂ activated carbons. As carbonization/activation temperature increased the sorption capacity increased from 3.4 to 33.3 mg g^-1 for CA char and 6.3-63.1 mg g^-1 for nitrogen doped char.

A 3D Hierarchical Pancake-Like Porous Carbon Nitride for Highly Enhanced Visible-Light Photocatalytic H2 Evolution

Polymeric carbon nitride is a fascinating visible-light-response metal-free semiconductor photocatalyst in recent decades. Nevertheless, the photocatalytic H2 efficiency is unsatisfactory due to the insufficient visible-light harvesting capacity and low quantum yields caused by the bulky structure seriously limited its applications. To overcome these defects, in this research, a 3D hierarchical pancake-like porous carbon nitride (PPCN) was successfully fabricated by a facile bottom-up method. The as-prepared photocatalyst exhibit enlarged surface area, enriched reactive sites, improved charge carrier transformation and separation efficiency, and expanded bandgap with a more negative conduction band towardan enhanced reduction ability. All these features synergistically enhanced the photocatalytic H2 evolution efficiency of 3% Pt@PPCN (430 µmol g−1 h−1) under the visible light illumination (λ ≥ 420 nm), which was nine-fold higher than that of 3% Pt@bulk C3N4 (BCN) (45 µmol g−1 h−1). The improved structure and enhanced photoelectric properties were systematically investigated by different characterization techniques. This research may provide an insightful synthesis strategy for polymeric carbon nitride with excellent light-harvesting capacity and enhanced separation of charges toward remarkable photocatalytic H2 for water splitting.

Nitrogen deficient carbon nitride for efficient visible light driven tetracycline degradation: a combination of experimental and DFT studies

The narrow visible-light absorption range and a high recombination rate of photo-excited electrons and holes are the main reasons for the confined photocatalytic performance of graphitic carbon nitride (g-C₃N₄).

Computational insights into the sorption mechanism of environmental contaminants by carbon nanoparticles through molecular dynamics simulation and density functional theory

Carbon nanomaterials like carbon nanotube, graphene or graphene oxide could significantly enhance contaminant sorption in aqueous solutions, offering a promising opportunity in water and air purification for removal of environmental contaminants.

Use of microalgae based technology for the removal of antibiotics from wastewater: A review

The antibiotic resistance induced by the release of antibiotics to the environment has urged research towards developing effective technologies for antibiotic removal from wastewater. Traditional technologies such as activated sludge processes are not effective for antibiotic removal. Recently, microalgae-based technology has been explored as a potential alternative for the treatment of wastewater containing antibiotics by adsorption, accumulation, biodegradation, photodegradation, and hydrolysis. In this review, the toxicities of antibiotics on microalgae, the mechanisms of antibiotic removal by microalgae, and the integration of microalgae with other technologies such as ultraviolet irradiation (photocatalysis), advanced oxidation, and complementary microorganism degradation for antibiotic removal were discussed. The limitations of current microalgae-based technology and future research needs were also discussed.

Visible-light-driven photocatalytic degradation of sulfamethazine by surface engineering of carbon nitride：Properties, degradation pathway and mechanisms

Polymeric carbon nitride semiconductor has been explored as emerging metal-free photocatalyst for solving the energy shortage and environmental issues. However, the efficiency of carbon nitride is still not satisfying. Herein, a facile copolymerization between L-cysteine and dicyandiamide has been applied to forming the modified carbon nitride photocatalysts. The photocatalytic performance was evaluated through degrading sulfamethazine under visible light illumination. The ameliorative structure and tuned energy band result in visible-light adsorption enhancement. In addition, nitrogen vacancies offer more sites to adsorbing molecular oxygen, thereby facilitating the transfer of electrons from carbon nitride to the surface adsorbed oxygen. As a result, the degradation rate of optimized modified carbon nitride sample for sulfamethazine was 0.1062 min^-1, which was almost 12 times than that of carbon nitride (0.0086 min^-1). Superoxide radicals and holes were mainly responsible for the sulfamethazine photodegradation by modified carbon nitride. Two reaction intermediates/products were observed and identified by high performance liquid chromatography-mass spectrometer, and a possible reaction pathway was proposed. This study provides new insights into the design of highly efficient photocatalyst for other organic pollutants degradation.

Nitrogen-doped flower-like porous carbon nanostructures for fast removal of sulfamethazine from water

The increasing concern for the toxicity of sulfamethazine (SMT) in water requires the establishment of effective water treatment processes to remove it. In this study, a novel adsorbent of nitrogen-doped flower-like porous carbon nanostructures (N-doped FPC) was proposed for the adsorption removal of SMT. The N-doped FPC possessed high surface area, good water dispersibility, and alkaline surface, endowing it with great adsorption efficiency towards SMT. The adsorption equilibrium data can be well fitted by both the Langmuir and Temkin models, and the maximum monolayer adsorption capacity of N-doped FPC was 610 mg g^-1 for SMT at 298 K. The N-doped FPC exhibited fast adsorption rate for SMT and adsorption equilibrium reached within only 5 min. The pseudo-first-order model described adsorption kinetics data well and the external mass transport was the rate-limiting step. The thermodynamic parameters (ΔG, ΔH, and ΔS) showed that the adsorption of SMT onto N-doped FPC was a feasible, spontaneous, and endothermic physisorption process. After five consecutive sorption/desorption cycles, the N-doped FPC retained more than 85% adsorption capacity. This study confirmed the promising potential of N-doped FPC as high-performance adsorbents for water purification.

Duality in the Mechanism of Hexagonal ZnO/CuxO Nanowires Inducing Sulfamethazine Degradation under Solar or Visible Light

This study presents the first evidence for the photocatalytic performance of ZnO/CuxO hexagonal nanowires leading to sulfamethazine (SMT) degradation. The chemical composition of the nanowires was determined by X-ray fluorescence (XRF). The sample with the composition ZnO/Cux = 1.25O led to faster SMT-degradation kinetics. The SMT-degradation kinetics were monitored by high performance liquid chromatography (HPLC). The morphology of the hexagonal nanowires was determined by scanning electron microscopy (SEM) and mapped by EDX. The redox reactions during SMT degradation were followed by X-ray photoelectron spectroscopy (XPS). The interfacial potential between the catalyst surface and SMT was followed in situ under solar and indoor visible light irradiation. SMT-degradation was mediated by reactive oxidative species (ROS). The interfacial charge transfer (IFCT) between ZnO and CuxO is shown to depend on the type of light used (solar or visible light). This later process was found to be iso-energetic due to the potential energy positions of ZnO and CuxO conduction bands (cb). The intervention of surface plasmon resonance (LSPR) species in the SMT degradation is discussed.

Ni-doped MIL-53(Fe) nanoparticles for optimized doxycycline removal by using response surface methodology from aqueous solution

This study proposes a facile one-pot solvothermal method to prepare Ni-doped MIL-53(Fe) nanoparticles as high-performance adsorbents for doxycycline removal. The morphology and structure of the samples were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, fourier transform infrared spectrum and thermogravimetric analysis. These results reveal that nickel was doped into MIL-53(Fe) successfully via a facile reaction, and the obtained Ni-doped MIL-53(Fe) nanoparticles showed excellent stability. The adsorption activities were evaluated in terms of the removal efficiencies of doxycycline (DOX) in aqueous solution. According to the response surface quadratic model (RSM), the optimal adsorption conditions were concentration of DOX 100 mg/L, temperature 35 °C, ionic strength 5 g/L and pH 7. The as-synthesized Ni-doped MIL-53(Fe) nanoparticles showed better adsorption capacity of 397.22 mg/g compared with other adsorbents. The investigation of adsorption mechanism demonstrated that the adsorption process was dominated by electrostatic and π-π stacking interactions. The Ni-doped MIL-53(Fe) nanoparticles with improved adsorption activities would have a great potential in DOX removal from aqueous environment.

Graphene modified anatase/titanate nanosheets with enhanced photocatalytic activity for efficient degradation of sulfamethazine under simulated solar light

Graphene modified anatase/titanate nanosheets (G/A/TNS) synthesized through hydrothermal treatment were used for solar-light-driven photocatalytic degradation of a typical pharmaceutically active compound, sulfamethazine (SMT). The optimal material was synthesized with 0.5 wt% of graphene loading (G/A/TNS-0.5), which could efficiently degrade 96.1% of SMT at 4 h. G/A/TNS-0.5 showed enhanced photocatalytic activity compared with the neat anatase and unmodified anatase/titanate nanosheets (A/TNS). UV-vis diffuse reflection spectra indicated that G/A/TNS-0.5 had a lower energy band gap (E_g) of 2.8 eV than A/TNS (3.1 eV). The grafted graphene acted as an electron transfer mediator after photoexcitation, resulting in inhibition on rapid recombination of electron-hole pairs. More importantly, architecture of graphene and titanate nanosheets both with two-dimensional structures greatly facilitated the photoexcited electron transfer. •OH and ¹O₂ were the primary reactive oxygen species (ROS) to SMT degradation. Fukui index (f^-) derived from density functional theory (DFT) calculation predicted the active sites on SMT molecule, and then SMT degradation pathway was proposed by means of intermediates identification and theoretical calculation. Furthermore, G/A/TNS-0.5 could be well reused and 90.5% of SMT was also degraded after five runs. The developed new photocatalysts show great potential for degradation of emerging organic contaminants through photocatalysis under solar light.

Uptake, translocation, and metabolism of sulfamethazine by Arabidopsis thaliana: distinguishing between phytometabolites and abiotic transformation products in the media

Plant accumulation of antibiotic residues presents potential risks to human and ecosystem health. However, the phytometabolic pathways of antibiotics following plant uptake are still largely uncharacterized. This study investigated the phytometabolism of sulfamethazine (SMT) by Arabidopsis thaliana, using ¹⁴C-labeled and unlabeled SMT. SMT was accumulated in both roots and shoots of axenic A. thaliana plants (123.7 ± 12.3 and 22.7 ± 1.0 µg/kg fw, respectively) after 21 days of exposure. However, the parent ¹⁴C-SMT accounted for only 1.7 ± 0.01% of the total ¹⁴C-radioactivity in plant tissues. The majority of ¹⁴C-radioactivity taken up by plants was present as bound residues (42.0-68.2% of initially applied ¹⁴C-SMT), while extractable ¹⁴C-residues accounted for only 7.7-12.6%. A. thaliana metabolized SMT primarily through glycosylation at the N⁴-nitrogen atom. Additionally, other products, including pterin-SMT, methylsalicylate-SMT, N⁴-formyl-SMT, desulfo-SMT, hydroxyl-SMT, N⁴-acetyl-SMT, desamino-SMT, and 2-amino-4,6-dimethylpyrimidine, were also identified. Notably, a portion of the extractable metabolites was excreted into the culture media, requiring characterization of these metabolites as either excreted phytometabolites or abiotic transformation products of SMT based on comparisons between experimental and control reactors.

Influence of FeONPs amendment on nitrogen conservation and microbial community succession during composting of agricultural waste: Relative contributions of ammonia-oxidizing bacteria and archaea to nitrogen conservation

Composting amended with iron oxide nanoparticles (FeONPs, α-Fe₂O₃ and Fe₃O₄ NPs) were conducted to study the impacts of FeONPs on nitrogen conservation and microbial community. It was found that amendment of FeONPs, especially α-Fe₂O₃ NPs, reduced total nitrogen (TN) loss, and reserved more NH₄⁺-N and mineral N. Pearson correlation analysis revealed that decrease of ammonia-oxidizing bacteria (AOB) in FeONPs treatments played more important role than ammonia-oxidizing archaea (AOA) in reserving more NH₄⁺-N and mineral N, and reducing TN loss. Bacterial community composition at phylum level did not shift with addition of FeONPs. Firmicutes, Actinobacteria, and Proteobacteria were the three most dominant phyla in all treatments. Overall, this study provides a method to reduce TN loss and improve mineral N reservation during composting, and gives a deep insight into the role of AOB and AOA in nitrogen transformation.

Three-in-one is really better: exploring the sensing and adsorption properties in a newly designed metal-organic system incorporating a copper(ii) ion

A 2-D copper(ii)-based coordination polymer, [Cu(SCN)(hmp)]_n CP (1), was crystallized via the slow evaporation method after the reaction of CuSO₄·5H₂O, 2-pyridinemethanol (hmpH), sodium thiocyanate and sodium hydroxide in water for functional applications. CP (1) was characterized via elemental analysis, FTIR, PXRD, magnetic, EPR, crystallographic and TGA studies. The crystal structure and EPR data confirmed a square pyramidal geometry around the Cu(ii) ions. The topological analysis revealed that CP 1 has a {6^{^}3} point symbol with a [6.6.6] extended point symbol and 3-c net, uninodal net having hcb and Shubnikov hexagonal plane net/(6,3) type of uncommon topology. The magnetic studies suggested the strong antiferromagnetic nature of CP (1). The fluorescence sensing property of CP (1) was investigated with different nitro aromatic compounds and hazardous metal ions. CP (1) demonstrated high selectivity and sensitivity towards nitrobenzene, even in the presence of other competitive nitro aromatics. In addition, CP (1) showed excellent selectivity and sensitivity toward Fe³⁺ over other metal ions. The possible detection mechanisms were proposed employing UV-visible and fluorescence spectroscopy and DFT calculations. CP (1) also showed excellent recyclability towards both analytes, and its initial intensity was almost regained after several washings. Moreover, CP (1) acted as an excellent adsorbent material for natural dyes with different charges and sizes, i.e., methylene blue (MB), methyl orange (MO) and Rhodamine-B. Furthermore, CP (1) was utilized repeatedly for the effective adsorption of MB from wastewater without significant loss in its adsorption capacity. Hence, the present CP (1) was designed to relate coordination chemistry with various functional applications of interest.

Decontamination of lead and tetracycline from aqueous solution by a promising carbonaceous nanocomposite: Interaction and mechanisms insight

Innovative carbonaceous nano-chlorapatites (CNClAPs) which originated from the pyrolyzation of the mixture of bamboo residues and chlorapatites varying from 400 °C to 600 °C were used to investigate the decontamination efficacy of lead (Pb²⁺) and tetracycline (TC) from wastewater. Rising pyrolytic temperature can highly improve the decontamination efficacy, of which CNClAP600 exhibited the most remarkable effects for Pb²⁺ and TC decontamination (90.37% for Pb²⁺ and 86.58% for TC at pH = 7). The kinetic, isotherm and characterization analysis demonstrated that the inner mechanisms for the decontamination of Pb²⁺ and TC involved precipitation, electrostatic interaction, hydrogen bonding, π-π interaction and pore filling. Experiment indicated that the enhancement and competitive adsorption resulted from the interaction between Pb²⁺ and TC could facilitate their joint decontamination under low concentrations. This research shed light on the management of coexisting heavy metals and organic matters contamination in wastewater by CNClAPs under different temperatures.

Enhanced adsorption of bisphenol A and sulfamethoxazole by a novel magnetic CuZnFe2O4-biochar composite

The widespread occurrence of endocrine-disrupting compound and pharmaceutical active compounds such as bisphenol A (BPA) and sulfamethoxazole (SMX) in natural freshwater resources can cause serious environmental problems even at low exposure levels. In this work, in order to remove BPA and SMX from aqueous solutions, a novel biochar-supported magnetic CuZnFe₂O₄ composite (CZF-biochar) was synthesized by a facile one-pot hydrothermal process. After characterization studies, the key factors affecting BPA and SMX adsorption on CZF-biochar were comprehensively investigated. The primary mechanisms for BPA and SMX adsorption included charge-assisted H-bonding, hydrophobic, and π-π electron donor-acceptor interactions. In summary, considering the fast kinetics, high adsorption properties, easy magnetic separation, and recyclability for multiple reuses, the CZF-biochar composite has potential for the removal of BPA, SMX, and potentially other emerging organic contaminants from contaminated soil and water.

Immobilized laccase on bentonite-derived mesoporous materials for removal of tetracycline

Bentonite is a natural and environmentally clay mineral, and bentonite-derived mesoporous materials (BDMMs) were obtained conveniently from the alkali and acid treatment of bentonite. In the present study, BDMMs were explored for immobilization of laccase obtained from Trametes versicolor. As a result, bentonite-derived mesoporous materials-Laccase (BDMMs-Lac) was developed for the removal of tetracycline (TC). The enzyme immobilization process was carried out through physical adsorption contact (ion exchange adsorption, hydrogen bond adsorption, and Van der waals adsorption) between the BDMMs and laccase. The process of immobilization remarkably increased its operating temperature. The BDMMs-Lac exhibited over 60% removal efficiency for TC within 3 h in the presence of 1-hydroxybenzotriazole (HBT). In conclusion, BDMMs-Lac showed more promising potential than free laccase for practical continuous applications.