Catalyst-free activation of persulfate by visible light for water disinfection: Efficiency and mechanisms

Application of iron-activated persulfate for municipal wastewater disinfection

To address the increasing contamination of aquatic environments and incidence of waterborne diseases, advanced oxidation processes with activated persulfate have emerged as tools to inactivate wastewater microorganisms and contaminants. In this work, the disinfection of a secondary effluent from a wastewater treatment plant by iron-based persulfate activation was studied. Experiments in a batch stirred tank reactor were carried out to evaluate the performance along reaction time and the effect of operational parameters in the oxidative process efficiency (oxidant and iron concentration, pH and temperature). After 60 min of reaction, persulfate and iron concentrations of 3 mM and 0.75 mM, respectively, combined with a neutral initial pH (7.5) and a temperature of 40 °C, allowed to reach values below the detection limit (<10 CFU/100 mL) of enterococci and enterobacteria with and without ciprofloxacin resistance, as well as a 91% inactivation of total heterotrophic organisms and a 70% removal of total organic carbon. Regrowth of microorganisms was evaluated 72 h after treatment and it was only noticed a slight increase in total heterotrophs. Evaluation of physico-chemical characteristics of the treated water showed that it meets the requirements imposed by European and Portuguese legislation for its reuse in irrigation and most urban utilities.

Fe Single-Atom Catalyst for Efficient and Rapid Fenton-Like Degradation of Organics and Disinfection against Bacteria

The Fenton-like reaction has great potential in water treatment. Herein, an efficient and reusable catalytic system is developed based on atomically dispersed Fe catalyst by anchoring Fe atoms on nitrogen-doped porous carbon (Fe SA/NPCs). The catalyst of Fe SA/NPCs exhibits enhanced performance in activating peroxymonosulfate (PMS) for organic pollutant degradation and bacterial inactivation. The Fe SA/NPCs + PMS system demonstrates a high turnover frequency of 39.31 min^-1 in Rhodamine B (RhB) degradation as well as a strong bactericidal activity that can completely sterilize an Escherichia coli culture within 5 min. Meanwhile, the degradation activity of RhB by Fe SA/NPCs is improved up to 28 to 371-fold in comparison with the controls. Complete degradation of RhB can be achieved in 30 s by the Fe SA/NPCs + PMS system, demonstrating an efficiency much higher than most traditional Fenton-like processes. Experiments with different radical scavengers and density functional theory calculations have revealed that singlet oxygen (¹ O₂ ) generated on the N-coordinated single Fe atom (Fe-N₄ ) sites is the key reactive species for the effective and rapid pollutant degradation and bacterial inactivation. This work innovatively affords a promising single-Fe-atom catalyst/PMS system for applying Fenton-like reactions in water treatment.

Metal-organic framework-derived CuCo/carbon as an efficient magnetic heterogeneous catalyst for persulfate activation and ciprofloxacin degradation

Herein, the authors synthesis an efficient and easily recycled CuCo/C catalyst through one-step carbonization of Cu@Co-MOF-71 (Abbreviated as Cu@Co-MOF in this work) precursor. The prepared CuCo/C has a high degradation efficiency of 90% for ciprofloxacin (CIP) by activating PMS in a wide value of pH 3-9 within 30 min. After pyrolysis, the carbon matrix as a dispersant can promote the highly uniform distribution of active metals. Additionally, the CIP removal efficiency was 85% after four cycles and the catalyst was easily separated from the solution by using magnets, showing the good stability and reusability. To further study the superiority of CuCo/C activated PMS in degrading CIP, the factors such as pH, the dosage of PMS and catalyst, temperature, inorganic ions and pollutant (CIP) concentration were investigated. Furthermore, the Liquid chromatography-mass spectrometry (LC-MS) was utilized to analyze the intermediate products and possible degradation pathways of CIP. Typically, the quenching experiments and electron paramagnetic resonance (EPR) technology were investigated to confirm the main reaction species including SO₄^▪-, OH▪ and O₂^▪- radicals as well as nonradical (¹O₂). This work put forward a simple method for synthesis of metal-organic framework (MOF) derived catalysts and its application in treatment of organic pollutants.

Visible Light-Induced Catalyst-Free Activation of Peroxydisulfate: Pollutant-Dependent Production of Reactive Species

Activation of peroxydisulfate (PDS, S₂O₈^2-) via various catalysts to degrade pollutants in water has been extensively investigated. However, catalyst-free activation of PDS by visible light has been largely ignored. This paper reports effective visible light activation of PDS without any additional catalyst, leading to the degradation of a wide range of organic compounds of high environmental and human health concerns. Importantly, the formation of reactive species is distinctively different in the PDS visible light system with and without pollutants [e.g., atrazine (ATZ)]. In addition to SO₄^•- generated via S₂O₈^2- dissociation under visible light irradiation, O₂^•- and ¹O₂ are also produced in both systems. However, in the absence of ATZ, H₂O₂ and O₂^•- are key intermediates and precursors for ¹O₂, whereas in the presence of ATZ, a different pathway was followed to produce O₂^•- and ¹O₂. Both radical and nonradical processes contribute to the degradation of ATZ in the PDS visible light system. The active role of ¹O₂ in the degradation of ATZ besides SO₄^•- is manifested by the enhanced degradation of contaminants and electron paramagnetic resonance spectroscopy measurements in D₂O.

Environmental free radicals efficiently inhibit the conjugative transfer of antibiotic resistance by altering cellular metabolism and plasmid transfer

Spread of antibiotic-resistant genes (ARGs) is a global public safety issue and inhibition their transfer is imperative. In this study, a novel strategy using environmental free radical exposure was developed to inhibit conjugative transfer of ARGs (RP4 plasmid) in aqueous solutions. Long-time free radical (·OH, 1O2, and O2·-) exposure significantly suppressed the conjugative transfer frequency of ARGs between Escherichia coli (E. coli) strains, and ·OH was more likely to attack ARG, thereby inhibiting the conjugate transfer frequency, compared to 1O2 and O2·-. Compared with the control, the conjugative transfer frequency significantly decreased from 4.08 × 10-5 to 1.2 × 10-8 after 10 min free radical exposure, confirming that the transfer and proliferation of ARGs were well inhibited. Correspondingly, the number of transconjugant significantly decreased by 61.7% after 10 min free radical exposure. Significant reductions in reactive oxygen species levels (ROS content and enzyme levels) and DNA damage-induced responses in the donor strains were observed after 10 min free radical exposure. Concurrently, intercellular contact was also weakened via inhibiting the synthesis of polysaccharides in extracellular polymeric substances. Moreover, the expressions of plasmid transfer genes were down-regulated after 10 min exposure due to the shortage of adenosine-triphosphate supply. This study firstly disclosed the underneath mechanisms for depressing ARGs transfer and dissemination via environmental free radical exposure.

Recent advancement in Bi5O7I-based nanocomposites for high performance photocatalysts

Bi₅O₇I belongs to the family of bismuth oxyhalides (BiOX, X = Cl, Br, I), having a unique layered structure with an internal electrostatic field that promotes the separation and transfer of photo-generated charge carriers. Interestingly, Bi₅O₇I exhibits higher thermal stability compared to its other BiOX member compounds and absorption spectrum extended to the visible region. Bi₅O₇I has demonstrated applications in diverse fields such as photocatalytic degradation of various organic pollutants, marine antifouling, etc. Unfortunately, owing to its wide band gap of ∼2.9 eV, its absorption lies mainly in the ultraviolet region, and a tiny portion of absorption lies in the visible region. Due to limited absorption, the photocatalytic performance of pure Bi₅O₇I is still facing challenges. In order to reduce the band gap and increase the light absorption capability of Bi₅O₇I, doping and formation of heterostructure strategies have been employed, which showed promising results in the photocatalytic performance. In addition, the plasmonic heterostructures of Bi₅O₇I were also developed to further boost the efficiency of Bi₅O₇I as a photocatalyst. Here, in this review article, we present such recent efforts made for the advanced development of Bi₅O₇I regarding its synthesis, properties and applications. The strategies for photocatalytic performance enhancement have been discussed in detail. Moreover, in the conclusion section, we have presented the current challenges and discussed possible prospective developments in this field.

Phthalate Esters Released from Plastics Promote Biofilm Formation and Chlorine Resistance

Phthalate esters (PAEs) are commonly released from plastic pipes in some water distribution systems. Here, we show that exposure to a low concentration (1-10 μg/L) of three PAEs (dimethyl phthalate (DMP), di-n-hexyl phthalate (DnHP), and di-(2-ethylhexyl) phthalate (DEHP)) promotes Pseudomonas biofilm formation and resistance to free chlorine. At PAE concentrations ranging from 1 to 5 μg/L, genes coding for quorum sensing, extracellular polymeric substances excretion, and oxidative stress resistance were upregulated by 2.7- to 16.8-fold, 2.1- to 18.9-fold, and 1.6- to 9.9-fold, respectively. Accordingly, more biofilm matrix was produced and the polysaccharide and eDNA contents increased by 30.3-82.3 and 10.3-39.3%, respectively, relative to the unexposed controls. Confocal laser scanning microscopy showed that PAE exposure stimulated biofilm densification (volumetric fraction increased from 27.1 to 38.0-50.6%), which would hinder disinfectant diffusion. Biofilm densification was verified by atomic force microscopy, which measured an increase of elastic modulus by 2.0- to 3.2-fold. PAE exposure also stimulated the antioxidative system, with cell-normalized superoxide dismutase, catalase, and glutathione activities increasing by 1.8- to 3.0-fold, 1.0- to 2.0-fold, and 1.2- to 1.6-fold, respectively. This likely protected cells against oxidative damage by chlorine. Overall, we demonstrate that biofilm exposure to environmentally relevant levels of PAEs can upregulate molecular processes and physiologic changes that promote biofilm densification and antioxidative system expression, which enhance biofilm resistance to disinfectants.

Deactivation of Caenorhabditis elegans nematodes in drinking water by PMS/UV-C: efficiency and mechanisms

The occurrence and infestations of chlorine-resistant invertebrates in drinking water distributions have attracted concerns on water quality in China, making effective deactivation imperative. This study presents a novel strategy for nematode (Caenorhabditis elegans) deactivation using peroxymonosulfate (PMS)/UV-C. The results indicated that 100% deactivation efficiency was obtained under optimal conditions. An acidic pH and 0.25 mg/L Fe(II) were beneficial to the PMS/UV-C-triggered deactivation of nematodes. A mechanism study demonstrated that [Formula: see text] was activated by UV-C to produce ·OH and [Formula: see text], which resulted in oxidative stress and stimulated the occurrence of cell apoptosis, leading to nematode deactivation. The results reveal PMS/UV-C as an alternative to chlorination in water treatment plants (WTP) or an emergency application when chlorine-resistant invertebrates breed in a second-supply water tank is a promising strategy for disinfection. This approach possessed the advantages of avoiding the production of chlorine disinfection by-products (DBP) and greater efficacy of nematode deactivation. This work will provide ideas for on-going research efforts into chlorine-resistant invertebrate deactivation and eventually achieve the direct drinking of municipal tap water.

Plasma induced efficient removal of antibiotic-resistant Escherichia coli and antibiotic resistance genes, and inhibition of gene transfer by conjugation

Antibiotic-resistant bacteria (ARB) and their resistance genes (ARGs) are emerging environmental pollutants that pose great threats to human health. In this study, a novel strategy using plasma was developed to simultaneously remove antibiotic-resistant Escherichia coli (AR bio-56954 E. coli) and its ARGs, aiming to inhibit gene transfer by conjugation. Approximately 6.6 log AR bio-56954 E. coli was inactivated within 10 min plasma treatment, and the antibiotic resistance to tested antibiotics (tetracycline, gentamicin, and amoxicillin) significantly decreased. Reactive oxygen and nitrogen species (RONS) including •OH, ¹O₂, O₂•^-, NO₂^-, and NO₃^- contributed to ARB and ARGs elimination; their attacks led to destruction of cell membrane, accumulation of excessive intracellular reactive oxygen substances, deterioration of conformational structures of proteins, and destroy of nucleotide bases of DNA. As a result, the ARGs (tet(C), tet(W), blaTEM-1, aac(3)-II), and integron gene intI1), and conjugative transfer frequency of ARGs significantly decreased after plasma treatment. The results demonstrated that plasma has great prospective application in removing ARB and ARGs in water, inhibiting gene transfer by conjugation.

Oxygen vacancy induced peroxymonosulfate activation by Mg-doped Fe2O3 composites for advanced oxidation of organic pollutants

Oxygen vacancy engineering has emerged as an effective approach to improve the performance of catalysts for peroxymonosulfate (PMS) activation. Herein, we report a facile precipitation method followed by calcination to synthesize cost-effective and environmentally friendly magnesium-doped hematite (Mg/Fe₂O₃) composites. Multiple characterization results reveal that the incorporation of Mg can significantly increase the oxygen vacancies and specific surface area of 5%Mg/Fe₂O₃, leading to a significantly enhanced performance in degrading Rhodamine B (RhB) through PMS activation. In a typical reaction, almost complete RhB (10 mg/L) removal can be achieved by the activation of PMS (0.2 g/L) using 5%Mg/Fe₂O₃ (0.5 g/L). Moreover, the as-synthesized catalyst exhibits a broad pH working range (3.96-10.69), high stability, and recyclability. The effects of several parameters (e.g., catalyst amount, PMS dosage, solution pH and temperature, and coexisting inorganic anions) on the removal of RhB in the 5%Mg/Fe₂O₃/PMS system are investigated. A plausible PMS activation mechanism is proposed, and ¹O₂ and O₂^- are identified as the predominant reactive species in RhB degradation instead of SO₄^- and OH. This study provides new insights into the development of highly efficient iron-based catalysts and highlights their potential applications in environmental purification.

The pH-dependent degradation of sulfadiazine using natural siderite activating PDS: The role of singlet oxygen

Occurring naturally siderite (FeCO₃) was used as the heterogeneous catalyst to activate peroxodisulfate (PDS) for the degradation of sulfadiazine under different initial pH values. The findings of this system exhibited various ROS (e.g. ¹O₂, SO₄^- and OH) present during a wide range of pH values. Among them, ¹O₂ could significantly facilitate the initial degradation rate, and the increased pH enhanced the role of ¹O₂. The factors including initial pH values, siderite dosage, PDS concentration, initial contaminants concentration, and water matrix were discussed. The role of each ROS was investigated through quenching test and electron paramagnetic resonance (EPR). Furthermore, the comprehensive degradation process was proposed based on the LC-MS results. And the cycle test demonstrates the reusability of siderite at a pH of 3. Accordingly, this study is of great significance for understanding the degradation of such sulfonamide pollutants in the siderite/PDS system.

Photocatalytic inactivation and destruction of harmful microalgae Karenia mikimotoi under visible-light irradiation: Insights into physiological response and toxicity assessment

Harmful algal blooms (HABs) caused by Karenia mikimotoi have frequently happened in coastal waters worldwide, causing serious damages to marine ecosystems and economic losses. Photocatalysis has potential to in-situ inhibit algal growth using sustainable sunlight. However, the inactivation and detoxification mechanisms of microalgae in marine environment have not been systematically investigated. In this work, for the first time, visible-light-driven photocatalytic inactivation of K. mikimotoi was attempted using g-C₃N₄/TiO₂ immobilized films as a model photocatalyst. The inactivation efficiency could reach 64% within 60 min, evaluated by real-time in vivo chlorophyll-a fluorometric method. The immobilized photocatalyst films also exhibited excellent photo-stability and recyclability. Mechanisms study indicated photo-generated h⁺ and ¹O₂ were the dominant reactive species. Algal cell rupture process was monitored by fluorescent microscope combined with SEM observation, which confirmed the damage of cell membrane followed by the leakage of the intracellular components including the entire cell nucleus. The physiological responses regarding up-regulation of antioxidant enzyme activity (i.e. CAT and SOD), intracellular ROSs level and lipid peroxidation were all observed. Moreover, the intracellular release profile and acute toxicity assessment indicated the toxic K. mikimotoi was successfully detoxified, and the released organic matter had no cytotoxicity. This work not only provides a potential new strategy for in-situ treatment of K. mikimotoi using sunlight at sea environments, but also creates avenue for understanding the inactivation and destruction mechanisms of marine microalgae treated by photocatalysis and the toxicity impacts on the marine environments.

Development of a VUV-UVC/peroxymonosulfate, continuous-flow Advanced Oxidation Process for surface water disinfection and Natural Organic Matter elimination: Application and mechanistic aspects

Surface waters are often charged with high amounts of natural organic matter (NOM), organic contaminants and pathogens. In this work, a Vacuum UV/PMS process (VUV-UVC/PMS) was employed for treating river water, assessing the simultaneous NOM mineralization and bacterial disinfection. The VUV-UVC process (without PMS) decreased TOC concentration from 3.83 to 0.15 mg/L within 20 min, achieving complete disinfection. Adding 5 mg/L PMS increased the rate of TOC removal by 80%; complete removal of TOC was achieved in 15 min and disinfection was attained twice as fast. The mechanism of NOM mineralization was scrutinized; aeration played a considerable role due to oxygen supply, mixing, and inducing in-situ H₂O₂ production. HO^• and SO₄^•- were the main radical species involved, alongside an important contribution of the matrix; sulfate enhanced TOC removal, due to the formation of additional radicals, underlining its importance. Furthermore, over 99% TOC reduction and complete disinfection was achieved in the VUV-UVC/PMS process operated under continuous-flow mode with a 2-min hydraulic retention time. Finally, the use of Atrazine (ATZ) as a probe compound and a series of scavenging tests led to an integrated proposal for the mineralization of NOM. Accordingly, the VUV-UVC/PMS process is evaluated as an efficient and promising technology for surface water treatment.

Evaluation of the effectiveness, safety, and feasibility of 9 potential biocides to disinfect acidic landfill leachate from algae and bacteria

This study evaluates 9 biocides as disinfectants against microbiological contaminants, specifically, microalgae and E. coli, while assessing their safety and environmental impact. Specifically, the biocide effectiveness and corresponding generation of halogenated compounds is assessed in a real contaminated groundwater receiving acidic leachate from a phosphogypsum landfill. Oxidizing agents are investigated, namely, hypochlorite, peracetic acid, hydrogen peroxide, chlorine dioxide, and persulfate, together with electrophilic biocides, namely, 2,2-dibromo-2-cyanoacetamide and (chloro-) methylisothiazolinone. In addition, a novel disinfection approach is assessed by applying reducing agents, namely, sulfite and metabisulfite. The disinfection mechanism and the formation of halogenated compounds are discussed on the basis of the mode of action and of the molecular structure of each biocide. Overall, the results show that an optimal dosage of the biocides exists to minimize the formation of harmful compounds in water while maximizing disinfection, especially for hypochlorite and peracetic acid. This dosage was between 0.03 mM and 0.15 mM depending on the biocide. The safety of electrophilic biocides is found to be associated to their molecular structure rather than their mode of action. Hydrogen peroxide, MIT, and metabisulfite are the most promising disinfectants in the contaminated groundwater matrix of interest since no halogenated by-products are detected upon successful disinfection, while they are able to completely inactivate bacteria and remove over the 80% of microalgae in the selected matrix. In particular, metabisulfite represents a highly promising biocide, owing to its low environmental and health impacts, as well as economic feasibility (estimated reagent cost ~0.002 € per cubic meter of treated water).

Advanced Functional Nanostructures based on Magnetic Iron Oxide Nanomaterials for Water Remediation: A Review

The fast growth of industrialization combined with the increasing population has led to an unparalleled demand for providing water in a safe, reliable, and cost-effective way, which has become one of the biggest challenges of the twenty-first century faced by global society. The application of nanotechnology in water treatment and pollution cleanup is a promising alternative in order to overcome the current limitations. In particular, the application of magnetic iron oxide nanoparticles (MIONs) for environmental remediation has currently received remarkable attention due to its unique combination of physicochemical and magnetic properties. Given the broadening use of these functional engineered nanomaterials, there is a growing concern about the adverse effects upon exposure of products and by-products to the environment. This makes vitally relevant the development of green chemistry in the synthesis processes combined with a trustworthy risk assessment of the nanotoxicity of MIONs as the scientific knowledge of the potential hazard of nanomaterials remains limited. This work provides comprehensive coverage of the recent progress on designing and developing iron oxide-based nanomaterials through a green synthesis strategy, including the use of benign solvents and ligands. Despite the limitations of nanotoxicity and environmental risks of iron oxide-based nanoparticles for the ecosystem, this critical review presents a contribution to the emerging knowledge concerning the theoretical and experimental studies on the toxicity of MIONs. Potential improvement of applications of advanced iron oxide-based hybrid nanostructures in water treatment and pollution control is also addressed in this review.

What is the role of light in persulfate-based advanced oxidation for water treatment?

Persulfate-based advanced oxidation processes (PS-based AOPs) under UV, visible, or solar irradiation are being intensively investigated for water treatment. Tremendous advances have been made for enhancing the performance towards the destruction of target pollutants, but a deeper understanding of the role of light in different photo-activated PS-based AOPs is still needed as a basis for improving the efficiency. This paper intends to provide an in-depth review of the underlying photo-activation mechanisms and recent progress in various common photo-activated PS-based AOPs reported over the last decade. Based on a comprehensive survey of previous studies, we categorize these processes according to their reaction mechanisms, including activation by direct UV radiation, processes based on dye-photosensitization, activation through ligand-to-metal charge transfer (LMCT), and photocatalytic processes. Moreover, the improvement in performance of contaminant degradation in these processes compared with those in the absence of light are summarized. Finally, we conclude this review by proposing critical challenges and future perspectives for developing efficient photo-activated PS-based AOPs toward improvement in water treatment and remediation.

Highly efficient adhesion and inactivation of Escherichia coli on visible-light-driven amino-functionalized BiOBr hybrids

Amino groups are successfully introduced on the surface of BiOBr nanosheets through a facile ammonia functionalization method. The surface morphology of the modified BiOBr hybrids varies on the concentration of applied ammonia solution. The active {001}-facet-exposed feature of nanosheets is well retained after amino-functionalization. With generation of small Bi₂O₄ nanoparticles on the surface of BiOBr nanosheets, the light adsorption of hybrids gradually shifts to the near infrared range. Compared to pure BiOBr with negligible activity, BOB10 hybrids exhibit superior photocatalytic activity for bacterial inactivation, with 7-log cells reduction in 40 min under LED irradiation. Amino functionalization endows BOB10 hybrids excellent adhesion capability towards surface negatively-charged bacterium Escherichia coli, which can significantly shortened access distance of the predominant •O₂^- and h⁺ guaranteeing their inactivation ability on cells membrane, thus leading to remarkable bacterial inactivation performance.

Mesoporous WO3/TiO2 spheres with tailored surface properties for concurrent solar photocatalysis and membrane filtration

The strategical integration of membrane water filtration with semiconductor photocatalysis presents a frontier in deep purification with a self-cleaning capability. However, the membrane fouling caused by the cake layer of the reclaimed TiO₂ nanoparticles is a key obstacle. Herein, mesoporous WO₃/TiO₂ spheres (∼450 nm in diameter) consisting of numerous self-assembled WO₃-decoated anatase TiO₂ nanocrystallites are successfully prepared via a facile wet-chemistry route. The decoration of monolayered WO₃ significantly affects the surface, photocatalytic, and optical properties of original mesoporous TiO₂ spheres. XRD and Raman analyses show the presence of monolayered WO₃ suppresses the crystal growth of TiO₂ during the calcination process, significantly improves the surface acidity, and causes an obvious red shift in absorption edge. These favorable textural properties, coupling the enhanced interfacial charge carrier separation, render mesoporous WO₃/TiO₂ spheres with a superior photocatalytic activity in degradation of methylene blue under UV, visible, and solar light irradiations. The optimal molar ratio of W/Ti is examined to 6%. The synthesized mesoporous WO₃/TiO₂ spheres also show much higher flux during membrane filtration in both dead-end and cross-flow modes, suggesting a promising photocatalyst for concurrent membrane filtration and solar photocatalysis.

An approach to the photocatalytic mechanism in the TiO2-nanomaterials microorganism interface for the control of infectious processes

The approach of this timely review considers the current literature that is focused on the interface nanostructure/cell-wall microorganism to understand the annihilation mechanism. Morphological studies use optical and electronic microscopes to determine the physical damage on the cell-wall and the possible cell lysis that confirms the viability and microorganism death. The key parameters of the tailoring the surface of the photoactive nanostructures such as the metal functionalization with bacteriostatic properties, hydrophilicity, textural porosity, morphology and the formation of heterojunction systems, can achieve the effective eradication of the microorganisms under natural conditions, ranging from practical to applications in environment, agriculture, and so on. However, to our knowledge, a comprehensive review of the microorganism/nanomaterial interface approach has rarely been conducted. The final remarks point the ideal photocatalytic way for the effective prevention/eradication of microorganisms, considering the resistance that the microorganism could develop without the appropriate regulatory aspects for human and ecosystem safety.

Visible light activation of persulfate by magnetic hydrochar for bacterial inactivation: Efficiency, recyclability and mechanisms

The development of "green" water disinfection technology utilizing solar energy is highly desired but remains challenging. In this study, sulfate radical (•SO₄^-)-mediated bacterial inactivation was first attempted by using Fe₃O₄-based magnetic hydrochar (MHC) as a recyclable catalyst for persulfate (PS) activation under visible light (VL) irradiation. Complete treatment of 8.0 log E. coli cells was reached within 40 min in VL/PS/MHC system, compared with that of only 2.0 log-reduction was obtained in the PS/MHC system under the same conditions. The system was applicable in wide range of pH (3.0-9.0), and increasing dissolved O₂ could further promote the efficiency. A three-route mechanism was proposed, in which the PS activation by ≡Fe(II) of Fe₃O₄ and photo-generated electron captured by PS were the major processes. The bacterial cell lesion process was found to be triggered directly via •SO₄^-, which caused the damage of outer membrane, followed by up-regulation of intracellular ROSs and destroy of chromosomal DNA, finally leading to irreversible cell death. Moreover, the VL/PS/MHC system is also effective to inactivate versatile pathogenic bacteria including P. aeruginosa and S. aureus. As a proof-of-concept, our study provides meaningful information to advance the areas of "green" water disinfection technology which can be realized by recyclable photocatalytic systems using solar energy.

Coupling Persulfate-Based AOPs: A Novel Approach for Piroxicam Degradation in Aqueous Matrices

The activated persulfate degradation of piroxicam, a non-steroidal anti-inflammatory drug (NSAID) belonging to oxicams, was investigated. Persulfate was activated with thermal energy or (UV-A and simulated solar) irradiation. Using 250 mg/L sodium persulfate at 40 °C degraded almost completely 0.5 mg/L of piroxicam in 30 min. Increasing piroxicam concentration from 0.5 to 4.5 mg/L decreased its removal. The observed kinetic constant was increased almost ten times from 0.077 to 0.755 min−1, when the temperature was increased from 40 to 60 °C, respectively. Process efficiency was enhanced at pH 5–7. At ambient conditions and 30 min of irradiation, 94.1% and 89.8% of 0.5 mg/L piroxicam was removed using UV-A LED or simulated solar radiation, respectively. Interestingly, the use of simulated sunlight was advantageous over UV-A light for both secondary effluent, and 20 mg/L of humic acid solution. Unlike other advanced oxidation processes, the presence of bicarbonate or chloride in the range 50–250 mg/L enhanced the degradation rate, while the presence of humic acid delayed the removal of piroxicam. The use of 0.5 and 10 g/L of methanol or tert-butanol as radical scavengers inhibited the reaction. The coupling of thermal and light activation methods in different aqueous matrices showed a high level of synergy. The synergy factor was calculated as 68.4% and 58.4% for thermal activation (40 °C) coupled with either solar light in 20 mg/L of humic acid or UV-A LED light in secondary effluent, respectively.

Three-dimensional flower-like shaped Bi5O7I particles incorporation zwitterionic fluorinated polymers with synergistic hydration-photocatalytic for enhanced marine antifouling performance

Herein, several novel composite films consisting of three-dimensional (3D) Bi₅O₇I flower-like shaped microsphere and zwitterionic fluorinated polymer (ZFP) were successfully fabricated with the aim of achieving high anti-fouling performance. The prepared Bi₅O₇I flower-like shaped microsphere particles with diameters in the range of 2∼3 μm were uniformly distributed on the surface and in the internal of ZFP. Benefiting from the hydration layer formed by the ZFP and the efficient photocatalytic performance of Bi₅O₇I flower-like microsphere, the resultant optimized Bi₅O₇I/ZFP composite film exhibited an excellent diatom anti-settling performance and a high antibacterial rate of 99.09% and 99.66% towards Escherichia coli and Staphylococcus aureus. In addition, the composite films possessed the strengthened visible light absorption, the effectively separation and transfer of the photo-induced electrons and holes, the large number of hydroxyl (OH) radicals and superoxide radicals (O₂^-) all in Bi₅O₇I/ZFP systems, all of which were beneficial for the photocatalytic antifouling activity. More importantly, the synergistic hydration-photocatalytic effect of the Bi₅O₇I/ZFP composite films are answerable for the improvement of the antifouling property compared to the control. Thus, the synergistic hydration-photocatalytic contribution of Bi₅O₇I/ZFP composite film will shows promise for potential application in marine antifouling.

Application of activated persulfate for the inactivation of fecal bacterial indicators in water

Activated persulfate, as a member of the broad group of Advanced Oxidation Processes (AOPs), has emerged as a promising method for the elimination of microorganisms in aqueous matrices. This study evaluates the disinfection efficiency of this technique with respect to the inactivation of Escherichia coli and Enterococcus faecalis in water samples, as representative Gram negative and Gram positive bacterial indicators, respectively. In this perspective, various activators were employed, namely, ferric ion, heating, ultrasound application and UVA irradiation, which exhibited different bactericidal effect, depending on the operating conditions and the structural properties of each species. The highest disinfection rates were achieved with 200 mg/L of persulfate and ferric ion or heating as activators. For instance, 6 Log reductions were recorded within only 10-15 min when 30 mg/L of iron were applied, whereas the same bacterial removal was noted upon heat-activation at 50 °C, but in longer periods (i.e. 45-60 min). Nevertheless, in all cases E. faecalis was more resistant than E. coli, which was readily inactivated in shorter treatment periods. The overall process activity was deteriorated above the limit of 200 mg/L of persulfate. Ultrasound application exhibited lower performance, as even more prolonged treatment was required (120-150 min) for the same bacterial decay with the persulfate concentration not affecting substantially the process. In an attempt to improve the ultrasound activity, it was combined together with iron but with no synergistic results, as no actual enhancement of the method was observed. Finally, UVA did not seem to serve as an activator under the applied conditions, taking into account that it resulted in negligible loss of bacterial viability. Based on the current results, activated persulfate may be used successfully for disinfection purposes; however, the appropriate establishment of process variables is mostly required, considering the various resistance levels of aquatic microorganisms under stressed conditions.

Manganese oxide integrated catalytic ceramic membrane for degradation of organic pollutants using sulfate radicals

Membrane separation and advanced oxidation processes (AOPs) have been respectively demonstrated to be effective for a variety of water and/or wastewater treatments. Innovative integration of membrane with catalytic oxidation is thus expected to be more competing for more versatile applications. In this study, ceramic membranes (CMs) integrated with manganese oxide (MnO₂) were designed and fabricated via a simple one-step ball-milling method with a high temperature sintering. Functional membranes with different loadings of MnO₂ (1.67%, 3.33% and 6.67% of the total membrane mass) were then fabricated. The micro-structures and compositions of the catalytic membranes were investigated by a number of advanced characterisations. It was found that the MnO₂ nanocatalysts (10-20 nm) were distributed uniformly around the Al₂O₃ particles (500 nm) of the membrane basal material, and can provide a large amount of active sites for the peroxymonosulfate (PMS) activation which can be facilitated within the pores of the catalytic membrane. The catalytic degradation of 4-hydroxylbenzoic acid (HBA), which is induced by the sulfate radicals via PMS activation, was investigated in a cross-flow membrane unit. The degradation efficiency slightly increased with a higher MnO₂ loading. Moreover, even with the lowest loading of MnO₂ (1.67%), the effectiveness of HBA degradation was still prominent, shown by that a 98.9% HBA degradation was achieved at the permeated side within 30 min when the initial HBA concentration was 80 ppm. The stability and leaching tests revealed a good stability of the catalytic membrane even after the 6th run. Electron paramagnetic resonance (EPR) and quenching tests were used to investigate the mechanism of PMS activation and HBA degradation. Both sulfate radicals (SO₄^•-) and hydroxyl radicals (^•OH) were generated in the catalytic membrane process. Moreover, the contribution from non-radical process was also observed. This study provides a novel strategy for preparing a ceramic membrane with the function of catalytic degradation of organic pollutants, as well as outlining into future integration of separation and AOPs.

Degradation of Sulfamethoxazole Using Iron-Doped Titania and Simulated Solar Radiation

This work examined the photocatalytic destruction of sulfamethoxazole (SMX), a widely used antibiotic, under simulated solar radiation using iron-doped titanium dioxide as the photocatalyst. Amongst the various iron/titania ratios examined (in the range 0%–2%), the catalyst at 0.04% Fe/TiO2 molar ratio exhibited the highest photocatalytic efficiency. The reaction rate followed pseudo-first-order kinetics, where the apparent kinetic constant was reduced as the initial concentration of SMX or humic acid increased. The photodecomposition of SMX was favored in natural pH but retarded at alkaline conditions. Unexpectedly, the presence of bicarbonates (in the range of 0.125–2 g/L) improved the removal of SMX, however, experiments conducted in real environmental matrices showed that process efficiency decreased as the complexity of the water matrix increased. The presence of sodium persulfate as an electron acceptor enhanced the reaction rate. However, only a small synergy was observed between the two individual processes. On the contrary, the addition of tert-butanol, a well-known hydroxyl radical scavenger, hindered the reaction, indicating the significant contribution of these radicals to the photocatalytic degradation of SMX. The photocatalyst retained half of its initial activity after five successive experiments.