Effects of Escherichia coli secB mutations on pre-maltose binding protein conformation and export kinetics

A mutation of Escherichia coli SecA protein that partially compensates for the absence of SecB

The Escherichia coli SecB protein is a cytosolic chaperone protein that is required for rapid export of a subset of exported proteins. To aid in elucidation of the activities of SecB that contribute to rapid export kinetics, mutations that partially suppressed the export defect caused by the absence of SecB were selected. One of these mutations improves protein export in the absence of SecB and is the result of a duplication of SecA coding sequences, leading to the synthesis of a large, in-frame fusion protein. Unexpectedly, this mutation conferred a second phenotype. The secA mutation exacerbated the defective protein export caused by point mutations in the signal sequence of pre-maltose-binding protein. One explanation for these results is that the mutant SecA protein has sustained a duplication of its binding site(s) for exported protein precursors so that the mutant SecA is altered in its interaction with precursor molecules.

Escherichia coli SecB, SecA, and SecY proteins are required for expression and membrane insertion of the bacteriocin release protein, a small lipoprotein

The SecB, SecA, and SecY dependency of a small outer membrane lipoprotein in Escherichia coli, the bacteriocin release protein (BRP), was studied. The detrimental effect of BRP expression on the culture turbidity (quasi-lysis) was strongly reduced in the sec mutants. Immunoblotting and radioactive labeling experiments showed that the expression, membrane insertion, and processing of the BRP precursor are dependent on SecB, SecA, and SecY. Labeling experiments with hybrid BRP gene constructs revealed that the mature part of the BRP precursor and not its stable signal sequence is important for its SecB dependency.

Role of the protonmotive force and of the state of the lipids in the in vivo protein secretion in Corynebacterium glutamicum, a gram-positive bacterium

PS1 is a protein translocated across the cytoplasmic membrane of Corynebacterium glutamicum, a Gram-positive bacterium. Western blots of whole cell extracts showed the presence of two bands associated with the mature and the precursor forms. Addition of chloramphenicol led to the disappearance of the precursor form while dissipation of the protonmotive force (delta microH) prior to the addition of chloramphenicol prevented the maturation of the precursor. Dissipation of delta microH prior to a pulse chase experiment resulted in a complete block on translocation; regeneration of delta microH allowed the translocation of PS1 synthesized in its absence. On the other hand, dissipation of delta microH immediately after a pulse period had little effect on PS1 secretion. Lowering the temperature to 10 degrees C at the end of the pulse period completely inhibited secretion. The efficiency of secretion as a function of increasing temperature followed closely the order-to-disorder transition of the membrane lipids as detected by fluorescence anisotropy of diphenylhexatriene. Taken together, the results show that delta microH and the state of the lipids affect different steps of PS1 secretion.

DnaK and DnaJ heat shock proteins participate in protein export in Escherichia coli

In Escherichia coli secreted proteins must be maintained in an export-competent state before translocation across the cytoplasmic membrane. This function is carried out by a group of proteins called chaperones. SecB is the major chaperone that interacts with precursor proteins before their secretion. We report results indicating that the DnaK and DnaJ heat shock proteins are also involved in the export of several proteins, most likely by acting as their chaperones. Translocation of alkaline phosphatase, a SecB-independent protein, was inhibited in dnaK- and dnaJ- mutant strains, suggesting that export of this protein probably involves DnaK and DnaJ. In addition, DnaK and DnaJ play a critical role in strains lacking SecB. They are required both for viability and for the residual processing of the SecB-dependent proteins LamB and maltose-binding protein (MBP) seen in secB null strains. Furthermore, overproduction of DnaK and DnaJ permits strains lacking SecB to grow in rich medium and accelerates the processing of LamB and MBP. These results suggest that under conditions where SecB becomes limiting, DnaK and DnaJ probably substitute for SecB and facilitate protein export. This provides the cell with a mechanism to overcome a temporary imbalance in the secretion process caused by an abrupt expansion in the pool of precursor proteins.

A gene (prsA) of Bacillus subtilis involved in a novel, late stage of protein export

A gene locus of Bacillus subtilis identified by mutations (prs) conferring a defect in protein secretion was cloned from a lambdaGEM-11 expression library. The sites of three closely linked prs mutations (prs-3, prs-29 and prs-40) were found to reside in a 5.3 kb DNA fragment, which also complemented the secretion defect in prs-3 and prs-29 mutants. Partial sequencing of the fragment showed that these three mutations affect one distinct gene (prsA) encoding a putative protein of 292 amino acids (33 kDa). Sequence analysis indicated the PrsA protein to be a lipoprotein located outside the cytoplasmic membrane. Thirty percent identity was shown to the PrtM protein of Lactococcus lactis, which is involved in the maturation of an exported proteinase. The phenotypes of prsA mutants and the structural similarity of PrsA with PrtM suggest that PrsA may have a novel function at a late phase in protein export.

Delta mu H+ and ATP function at different steps of the catalytic cycle of preprotein translocase

Preprotein translocation in E. coli requires ATP, the membrane electrochemical potential delta mu H+, and translocase, an enzyme with an ATPase domain (SecA) and the membrane-embedded SecY/E. Studies of translocase and proOmpA binds to the SecA domain. Second, SecA binds ATP. Third, ATP-binding energy permits translocation of approximately 20 residues of proOmpA. Fourth, ATP hydrolysis releases proOmpA. ProOmpA may then rebind to SecA and reenter this cycle, allowing progress through a series of transmembrane intermediates. In the absence of delta mu H+ or association with SecA, proOmpA passes backward through the membrane, but moves forward when either ATP and SecA or a membrane electrochemical potential is supplied. However, in the presence of delta mu H+ (fifth step), proOmpA rapidly completes translocation. delta mu H(+)-driven translocation is blocked by SecA plus nonhydrolyzable ATP analogs, indicating that delta mu H+ drives translocation when ATP and proOmpA are not bound to SecA.

A kinetic partitioning model of selective binding of nonnative proteins by the bacterial chaperone SecB

An in vitro assay for the interaction of SecB, a molecular chaperone from Escherichia coli, with polypeptide ligands was established based on the ability of SecB to block the refolding of denatured maltose-binding protein. Competition experiments show that SecB binds selectively to nonnative proteins with high affinity and without specificity for a particular sequence of amino acids. It is proposed that selectivity in binding is due to a kinetic partitioning of polypeptides between folding and association with SecB.

Molecular chaperones and protein translocation across the Escherichia coli inner membrane

Proteins that are able to translocate across biological membranes assume a loosely folded structure. In this review it is suggested that the loosely folded structure, referred to here as the 'pre-folded conformation', is a particular structure that interacts favourably with components of the export apparatus. Two soluble factors, SecB and GroEL, have been implicated in maintenance of the pre-folded conformation and have been termed 'molecular chaperones'. Results suggest that SecB may be a chaperone that is specialized for binding to exported protein precursors, while GroEL may be a general folding modulator that binds to many intracellular proteins.

SecB-independent export of Escherichia coli ribose-binding protein (RBP): some comparisons with export of maltose-binding protein (MBP) and studies with RBP-MBP hybrid proteins

The efficient export of the Escherichia coli maltose-binding protein (MBP) is known to be SecB dependent, whereas ribose-binding protein (RBP) export is SecB independent. When the MBP and RBP signal peptides were exchanged precisely at the signal peptidase processing sites, the resultant RBP-MBP and MBP-RBP hybrid proteins both were efficiently exported in SecB+ cells. However, only MBP-RBP was efficiently exported in SecB- cells; RBP-MBP exhibited a significant export defect, a finding that was consistent with previous proposals that SecB specifically interacts with the mature moiety of precursor MBP to promote export. The relatively slow, totally posttranslational export mode exhibited by certain mutant RBP and MBP-RBP species in SecB+ cells was not affected by the loss of SecB. In contrast, MBP and RBP-MBP species with similarly altered signal peptides were totally export defective in SecB- cells. Both export-defective MBP and RBP-MBP interfered with SecB-mediated protein export by depleting cells of functional SecB. In contrast, neither export-defective RBP nor MBP-RBP elicited such an interference effect. These and other data indicated that SecB is unable to interact with precursor RBP or that any interaction between these two proteins is considerably weaker than that of SecB with precursor MBP. In addition, no correlation could be established between a SecB requirement for export and PrlA-mediated suppression of signal peptide export defects. Finally, previous studies have established that wild-type MBP export can be accomplished cotranslationally, whereas wild-type RBP export is strictly a posttranslational process. In this study, cotranslational export was not detected for either MBP-RBP or RBP-MBP. This indicates that the export mode exhibited by a given precursor protein (cotranslational versus posttranslational) is determined by properties of both the signal peptide and the mature moiety.

The binding cascade of SecB to SecA to SecY/E mediates preprotein targeting to the E. coli plasma membrane

The export of many E. coli proteins such as proOmpA requires the cytosolic chaperone SecB and the membrane-bound preprotein translocase. Translocase is a multisubunit enzyme with the SecA protein as its peripheral membrane domain and the SecY/E protein as its integral domain. SecB, by binding to proOmpA in the cytosol, prevents its aggregation or association with membranes at nonproductive sites. The SecA receptor binds the proOmpA-SecB complex (Kd approximately 6 x 10(-8) M) through direct recognition of both the SecB (Kd approximately 2 x 10(-7) M) as well as the leader and mature domains of the precursor protein. SecB has a dual function in stabilizing the precursor and in passing it on to membrane-bound SecA, the next step in the pathway. SecA itself is bound to the membrane by its affinity (Kd approximately 4 x 10(-8) M) for SecY/E and for acidic lipids. The functions of SecB and SecA as a two-stage receptor system are linked by their affinity for each other.

SecB protein: a cytosolic export factor that associates with nascent exported proteins

Soluble factors participate in protein translocation across a variety of biological membranes. The Escherichia coli soluble protein SecB (the product of the secB gene) is involved in the export of periplasmic and outer membrane proteins. The isolation of secB mutations permitted the demonstration that SecB is required for rapid and efficient export of certain proteins. Consistent with the results of these genetic studies, purified SecB has been shown to stimulate protein translocation across E. coli inner membrane vesicles in vitro. This article presents a review of these past studies of SecB, speculation on the role of SecB in protein translocation, and a comparison of SecB and other factors, trigger factor and GroEL.

Export of the periplasmic maltose-binding protein of Escherichia coli

The export of the maltose-binding protein (MBP), the malE gene product, to the periplasm of Escherichia coli cells has been extensively investigated. The isolation of strains synthesizing MalE-LacZ hybrid proteins led to a novel genetic selection for mutants that accumulate export-defective precursor MBP (preMBP) in the cytoplasm. The export defects were subsequently shown to result from alterations in the MBP signal peptide. Analysis of these and a variety of mutants obtained in other ways has provided considerable insight into the requirements for an optimally functional MBP signal peptide. This structure has been shown to have multiple roles in the export process, including promoting entry of preMBP into the export pathway and initiating MBP translocation across the cytoplasmic membrane. The latter has been shown to be a late event relative to synthesis and can occur entirely posttranslationally, even many minutes after the completion of synthesis. Translocation requires that the MBP polypeptide exist in an export-competent conformation that most likely represents an unfolded state that is not inhibitory to membrane transit. The signal peptide contributes to the export competence of preMBP by slowing the rate at which the attached mature moiety folds. In addition, preMBP folding is thought to be further retarded by the binding of a cytoplasmic protein, SecB, to the mature moiety of nascent preMBP. In cells lacking this antifolding factor, MBP export represents a race between delivery of newly synthesized, export-competent preMBP to the translocation machinery in the cytoplasmic membrane and folding of preMBP into an export-incompetent conformation. SecB is one of three E. coli proteins classified as "molecular chaperones" by their ability to stabilize precursor proteins for membrane translocation.

Protein translocation in vitro: biochemical characterization of genetically defined translocation components

Recent years have seen the convergence of both genetic and biochemical approaches in the study of protein translocation in E. coli. The powerful combination of these approaches is exemplified in the use of an in vitro protein synthesis-protein translocation system to analyze the role of genetically defined components of the protein translocation machinery. We describe in this review recent results focusing on the function of the secA, secB, and secY gene products and the demonstration of their requirement for in vitro protein translocation. The SecA protein was recently shown to possess ATPase activity and was proposed to be a component of the translocation ATPase. We present a speculative working model whereby the translocator complex is composed of the integral membrane proteins SecY, SecD, SecE, and SecF, forming an aqueous channel in the cytoplasmic membrane, and the tightly associated peripheral membrane protein SecA functioning as the catalytic subunit of the translocator or "protein-ATPase."

The folding properties of the Escherichia coli maltose-binding protein influence its interaction with SecB in vitro

It has been proposed that the cytoplasmic SecB protein functions as a component of the Escherichia coli protein export machinery by serving as an antifolding factor that retards folding of the precursor maltose-binding protein (preMBP) into a translocation-incompetent form. In this study, it was found that SecB directly interacts with wild-type preMBP and various mutationally altered MBP species synthesized in vitro to form a SecB-MBP complex that can be precipitated with anti-SecB serum. The association of SecB with wild-type preMBP was relatively unstable; such a complex was formed only when SecB was present cotranslationally or after denaturation of previously synthesized preMBP and was detected with only low efficiency. In marked contrast, MBP species that were defective in the ability to assume the stable conformation of wild-type preMBP or that exhibited significantly slower folding kinetics formed much more stable complexes with SecB. In one case, we demonstrated that SecB did not need to be present cotranslationally for complex formation to occur. Formation of a complex between SecB and MBP was clearly not dependent on the MBP signal peptide. However, we were unable to detect complex formation between SecB and MBP lacking virtually the entire signal peptide but having a completely intact mature moiety. This MBP species folded at a rate considerably faster than that of wild-type preMBP. The propensity of this mutant protein to assume the native conformation of mature MBP apparently precludes a stable association with SecB, whereas an MBP species lacking a signal peptide but exhibiting altered folding properties did form a complex with SecB that could be precipitated with anti-SecB serum.

No specific recognition of leader peptide by SecB, a chaperone involved in protein export

Most proteins destined for export from Escherichia coli are made as precursors containing amino-terminal leader sequences that are essential for export and that are removed during the process. The initial step in export of a subset of proteins, which includes maltose-binding protein, is binding of the precursor by the molecular chaperone SecB. This work shows directly that SecB binds with high affinity to unfolded maltose-binding protein but does not specifically recognize and bind the leader. Rather, the leader modulates folding to expose elements in the remainder of the polypeptide that are recognized by SecB.

The role of the mature part of secretory proteins in translocation across the plasma membrane and in regulation of their synthesis in Escherichia coli

Presently available data are reviewed which concern the role of the mature parts of secretory precursor proteins in translocation across the plasma membrane of Escherichia coli. The following conclusions can be drawn; i) signals, acting in a positive fashion and required for translocation do not appear to exist in the mature polypeptides; ii) a number of features have been identified which either affect the efficiency of translocation or cause export incompatibility. These are: alpha) protein folding prior to translocation; beta) restrictions regarding the structure of N-terminus; gamma) presence of lipophilic anchors; delta) too low a size of the precursor. Efficiency of translocation is also enhanced by binding of chaperonins (SecB, trigger factor, GroEL) to precursors. Binding sites for chaperonins appear to exist within the mature parts of the precursors but the nature of these sites has remained rather mysterious. Mutant periplasmic proteins with a block in release from the plasma membrane have been described, the mechanism of this block is not known. The mature parts of secretory proteins can also be involved in the regulation of their synthesis. It appears that exported proteins are already recognized as such before they are channelled into the export pathway and that their synthesis can be feed-back inhibited at the translational level.

Mutations that improve export of maltose-binding protein in SecB- cells of Escherichia coli

It previously has been proposed that the Escherichia coli SecB protein promotes the export of the maltose-binding protein (MBP) from the cytoplasm by preventing the folding of the precursor MBP (preMBP) into a translocation-incompetent conformation. The export of wild-type MBP is only partially blocked in SecB- cells. In contrast, the export of MBP16-1, an MBP species with a defective signal peptide, is totally dependent on SecB; hence, SecB- cells that synthesize MBP16-1 are unable to utilize maltose as a sole carbon source. The selection of Mal+ revertants primarily yielded mutants with alterations in the MBP16-1 signal peptide that permitted SecB-independent MBP export to the periplasm to various extents. Although each of these alterations increased the overall hydrophobicity of the signal peptide, it was not possible to strictly equate changes in hydrophobicity with the degree of SecB-independent export. Somewhat unexpectedly, two mutants were obtained in which MBP export in SecB- cells was markedly superior to that of the wild-type MBP. Although wild-type MBP is not cotranslationally translocated in SecB- cells, the two mutant proteins designated MBP172 and MBP173 exhibited significant cotranslational export in the absence of SecB. Thus, the role of SecB was partially supplanted by a signal peptide that promoted more rapid movement of MBP through the export pathway. When preMBP included the MBP172 signal peptide as well as an alteration in the mature moiety that slows folding, the SecB requirement for maximal MBP export efficiency was almost totally eliminated. These results provide additional strong support for the proposed antifolding role of SecB in MBP export.

The mature portion of Escherichia coli maltose-binding protein (MBP) determines the dependence of MBP on SecB for export

The product of the secB gene is required for export of a subset of secreted proteins to the outer membrane and periplasm of Escherichia coli. Precursor maltose-binding protein (MBP) accumulates in the cytoplasm of secB-carrying mutants, but export of alkaline phosphatase is only minimally affected by secB mutations. When export of MBP-alkaline phosphatase hybrid proteins was analyzed in wild-type and secB-carrying mutant strains, the first third of mature MBP was sufficient to render export of the hybrid proteins dependent on SecB. Substitution of a signal sequence from a SecB-independent protein had no effect on SecB-dependent export. These findings show that the first third of mature MBP is capable of conferring export incompetence on an otherwise competent protein.

Characterization of the Escherichia coli protein-export gene secB

The Escherichia coli secB gene product is required for normal export of envelope proteins out of the cell cytoplasm. In this report, we present the identification and nucleotide sequence of the secB coding sequence. The secB structural gene overlaps almost completely with a predicted open reading frame (ORF) that is encoded on the opposite strand. To establish the identity of the secB ORF, we characterized a secB mutation that caused total loss of secB function, based upon its phenotype. This mutation resulted from a nucleotide change that caused an ochre mutation in one ORF (the secB gene) and a silent (no amino acid change) codon change in the opposite ORF.