Effect of the alginate composition on the biocompatibility of alginate-polylysine microcapsules

A strategy to passively reduce neuroinflammation surrounding devices implanted chronically in brain tissue by manipulating device surface permeability

Available evidence indicates that pro-inflammatory cytokines produced by immune cells are likely responsible for the negative sequela associated with the foreign body response (FBR) to chronic indwelling implants in brain tissue. In this study a computational modeling approach was used to design a diffusion sink placed at the device surface that would retain pro-inflammatory cytokines for sufficient time to passively antagonize their impact on the FBR. Using quantitative immunohistochemistry, we examined the FBR to such engineered devices after a 16-week implantation period in the cortex of adult male Sprague-Dawley rats. Our results indicate that thick permeable surface coatings, which served as diffusion sinks, significantly reduced the FBR compared to implants either with no coating or with a thinner coating. The results suggest that increasing surface permeability of solid implanted devices to create a diffusion sink can be used to reduce the FBR and improve biocompatibility of chronic indwelling devices in brain tissue.

Long-term survival of allograft murine islets coated via covalently stabilized polymers

Clinical islet transplantation (CIT) has emerged as a promising treatment option for type 1 diabetes mellitus (T1DM); however, the antirejection drug regimen necessary to mitigate allograft islet rejection is undesirable. The use of polymeric coatings to immunocamouflage the transplant from host immune attack has great potential. Alginate and poly(ethylene glycol) (PEG)-based polymers, functionalized with azide and phosphine, respectively, which form spontaneous and chemoselective crosslinks via the bioorthogonal Staudinger ligation scheme, were recently developed. Here, the utility of these polymers to form immunoprotective, ultrathin coatings on murine primary pancreatic islets is explored. Resulting coatings are nontoxic, with unimpaired glucose stimulated insulin secretion. Transplantation of coated BALB/c (H-2(d) ) islets into streptozotozin-induced diabetic C57BL/6 (H-2(b) ) results in prompt achievement of normoglycemia, at a rate comparable to controls. A significant subset of animals receiving coated islets (57%) exhibits long-term (>100 d) function, with robust islets observed upon explantation. Control islets rejected after 15 d (±9 d). Results illustrate the capacity of chemoselectively functionalized polymers to form coatings on islets, imparting no detrimental effect to the underlying cells, with resulting coatings exhibiting significant protective effects in an allograft murine model.

Cell replacement strategies aimed at reconstitution of the β-cell compartment in type 1 diabetes

Emerging technologies in regenerative medicine have the potential to restore the β-cell compartment in diabetic patients, thereby overcoming the inadequacies of current treatment strategies and organ supply. Novel approaches include: 1) Encapsulation technology that protects islet transplants from host immune surveillance; 2) stem cell therapies and cellular reprogramming, which seek to regenerate the depleted β-cell compartment; and 3) whole-organ bioengineering, which capitalizes on the innate properties of the pancreas extracellular matrix to drive cellular repopulation. Collaborative efforts across these subfields of regenerative medicine seek to ultimately produce a bioengineered pancreas capable of restoring endocrine function in patients with insulin-dependent diabetes.

Influence of physical and mechanical properties of amphiphilic biosynthetic hydrogels on long-term cell viability

Maintaining the mechanical properties of biofunctional hydrogels of natural resources for tissue engineering and biomedical applications for an intended period of duration is a challenge. Though anionic polysaccharide alginate has been hailed for its excellent biomimetic characters for tissue engineering, it usually fails in load bearing and other dynamic mechanical environment. In this paper this issue was addressed by copolymerizing alginate with the biocompatible and mechanically robust synthetic biodegradable polyester and crosslinking with polyethylene glycol diacrylate (PEGDA) and vinyl co-monomers, 2-hydroxy ethyl methacrylate (HEMA), methyl methacrylate (MMA) and N N׳ methylene bis acrylamide (NMBA) to form three hydrogels. All three hydrogels were amphiphilic, hemocompatible and non-cytotoxic. These hydrogels exhibited appreciable water holding capacity. Comparatively, hydrogel prepared with PEGDA-NMBA crosslinkers displayed larger pore size, increased crosslinking, higher tensile strength and controlled degradation. With appreciable swelling and EWC, this hydrogel elicited better biological responses with long-term cell viability for cardiac tissue engineering.

Polymers in cell encapsulation from an enveloped cell perspective

In the past two decades, many polymers have been proposed for producing immunoprotective capsules. Examples include the natural polymers alginate, agarose, chitosan, cellulose, collagen, and xanthan and synthetic polymers poly(ethylene glycol), polyvinyl alcohol, polyurethane, poly(ether-sulfone), polypropylene, sodium polystyrene sulfate, and polyacrylate poly(acrylonitrile-sodium methallylsulfonate). The biocompatibility of these polymers is discussed in terms of tissue responses in both the host and matrix to accommodate the functional survival of the cells. Cells should grow and function in the polymer network as adequately as in their natural environment. This is critical when therapeutic cells from scarce cadaveric donors are considered, such as pancreatic islets. Additionally, the cell mass in capsules is discussed from the perspective of emerging new insights into the release of so-called danger-associated molecular pattern molecules by clumps of necrotic therapeutic cells. We conclude that despite two decades of intensive research, drawing conclusions about which polymer is most adequate for clinical application is still difficult. This is because of the lack of documentation on critical information, such as the composition of the polymer, the presence or absence of confounding factors that induce immune responses, toxicity to enveloped cells, and the permeability of the polymer network. Only alginate has been studied extensively and currently qualifies for application. This review also discusses critical issues that are not directly related to polymers and are not discussed in the other reviews in this issue, such as the functional performance of encapsulated cells in vivo. Physiological endocrine responses may indeed not be expected because of the many barriers that the metabolites encounter when traveling from the blood stream to the enveloped cells and back to circulation. However, despite these diffusion barriers, many studies have shown optimal regulation, allowing us to conclude that encapsulated grafts do not always follow nature's course but are still a possible solution for many endocrine disorders for which the minute-to-minute regulation of metabolites is mandatory.

Advances in biocompatibility and physico-chemical characterization of microspheres for cell encapsulation

Cell encapsulation has already shown its high potential and holds the promise for future cell therapies to enter the clinics as a large scale treatment option for various types of diseases. The advancement in cell biology towards this goal has to be complemented with functional biomaterials suitable for cell encapsulation. This cannot be achieved without understanding the close correlation between cell performance and properties of microspheres. The ongoing challenges in the field of cell encapsulation require a critical view on techniques and approaches currently utilized to characterize microspheres. This review deals with both principal subjects of microspheres characterization in the cell encapsulation field: physico-chemical characterization and biocompatibility. The up-to-day knowledge is summarized and discussed with the focus to identify missing knowledge and uncertainties, and to propose the mandatory next steps in characterization of microspheres for cell encapsulation. The primary conclusion of this review is that further success in development of microspheres for cell therapies cannot be accomplished without careful selection of characterization techniques, which are employed in conjunction with biological tests.

Cell encapsulation via microtechnologies

The encapsulation of living cells in a variety of soft polymers or hydrogels is important, particularly, for the rehabilitation of functional tissues capable of repairing or replacing damaged organs. Cellular encapsulation segregates cells from the surrounding tissue to protect the implanted cell from the recipient's immune system after transplantation. Diverse hydrogel membranes have been popularly used as encapsulating materials and permit the diffusion of gas, nutrients, wastes and therapeutic products smoothly. This review describes a variety of methods that have been developed to achieve cellular encapsulation using microscale platform. Microtechnologies have been adopted to precisely control the encapsulated cell number, size and shape of a cell-laden polymer structure. We provide a brief overview of recent microtechnology-based cell encapsulation methods, with a detailed description of the relevant processes. Finally, we discuss the current challenges and future directions likely to be taken by cell microencapsulation approaches toward tissue engineering and cell therapy applications.

Applications of tissue engineering in the genitourinary tract

Congenital abnormalities and acquired disorders can lead to organ damage or loss of tissue within the genitourinary tract. For reconstructive purposes, tissue-engineering efforts are currently underway for virtually every type of tissue and organ within the urinary tract. Tissue engineering incorporates the fields of cell transplantation, materials science and engineering for the purpose of creating functional replacement tissue. This article reviews some of the principles of tissue engineering and some of the applications of these principles to the genitourinary tract.

Role of alginate in bone tissue engineering

Bone, a typical inorganic-organic biocomposite, is made of approximately 70 wt% inorganic components, mainly hydroxyapatite (HAp,Ca(10)(PO(4))(6)(OH)(2)), and 30 wt% of organic matrix, mainly collagen I. Human organ failure caused by defects, injuries, or other types of damage is one of the most devastating and costly problems in human health care. Recently, tissue engineering has emerged as a promising approach for bone repair and reconstruction. The ultimate goal of bone tissue engineering is the fabrication of a construct that matches the physical and biological properties of the natural bone tissue. Biopolymers have some distinct advantages such as their biodegradation rates and mechanical properties can be tailored to a certain extent for specific applications. Alginate, a natural polysaccharide, is readily processable for applicable three-dimensional scaffolding materials such as hydrogels, microspheres, microcapsules, sponges, foams, and fibers. Alginate can be easily modified via chemical and physical reactions to obtain derivatives having various structures, properties, functions, and applications. The purpose of this chapter is to review recent research on alginate in bone tissue engineering.

Transplantation of Encapsulated Pancreatic Islets as a Treatment for Patients with Type 1 Diabetes Mellitus

Encapsulation of pancreatic islets has been proposed and investigated for over three decades to improve islet transplantation outcomes and to eliminate the side effects of immunosuppressive medications. Of the numerous encapsulation systems developed in the past, microencapsulation have been studied most extensively so far. A wide variety of materials has been tested for microencapsulation in various animal models (including nonhuman primates or NHPs) and some materials were shown to induce immunoprotection to islet grafts without the need for chronic immunosuppression. Despite the initial success of microcapsules in NHP models, the combined use of islet transplantation (allograft) and microencapsulation has not yet been successful in clinical trials. This review consists of three sections: introduction to islet transplantation, transplantation of encapsulated pancreatic islets as a treatment for patients with type 1 diabetes mellitus (T1DM), and present challenges and future perspectives.

Evaluation of encapsulated liver cell spheroids in a fluidised-bed bioartificial liver for treatment of ischaemic acute liver failure in pigs in a translational setting

Liver failure is an increasing problem. Donor-organ shortage results in patients dying before receiving a transplant. Since the liver can regenerate, alternative therapies providing temporary liver-support are sought. A bioartificial-liver would temporarily substitute function in liver failure buying time for liver regeneration/organ-procurement. Our aim: to develop a prototype bioartificial-liver-machine (BAL) comprising a human liver-derived cell-line, cultured to phenotypic competence and deliverable in a clinical setting to sites distant from its preparation. The objective of this study was to determine whether its use would improve functional parameters of liver failure in pigs with acute liver failure, to provide proof-of-principle. HepG2 cells encapsulated in alginate-beads, proliferated in a fluidised-bed-bioreactor providing a biomass of 4-6 × 10(10)cells, were transported from preparation-laboratory to point-of-use operating theatre (6000 miles) under perfluorodecalin at ambient temperature. Irreversible ischaemic liver failure was induced in anaesthetised pigs, after portal-systemic-shunt, by hepatic-artery-ligation. Biochemical parameters, intracranial pressure, and functional-clotting were measured in animals connected in an extracorporeal bioartificial-liver circuit. Efficacy was demonstrated comparing outcomes between animals connected to a circuit containing alginate-encapsulated cells (Cell-bead BAL), and those connected to circuit containing alginate capsules without cells (Empty-bead BAL). Cells of the biomass met regulatory standards for sterility and provenance. All animals developed progressive liver-failure after ischaemia induction. Efficacy of BAL was demonstrated since animals connected to a functional biomass (+ cells) had significantly smaller rises in intracranial pressure, lower ammonia levels, more bilirubin conjugation, improved acidosis and clotting restoration compared to animals connected to the circuit without cells. In the +cell group, human proteins accumulated in pigs' plasma. Delivery of biomass using a short-term cold-chain enabled transport and use without loss of function over 3 days. Thus, a fluidised-bed bioreactor containing alginate-encapsulated HepG2 cell-spheroids improved important parameters of acute liver failure in pigs. The system can readily be up-scaled and transported to point-of-use justifying development at clinical scale.

Preparation of cell-encapsulation devices in confined microenvironment

The entrapment of cells into hydrogel microdevice in form of microparticles or microfibers is one of the most appealing and useful tools for cell-based therapy and tissue engineering. Cell encapsulation procedures allow the immunoisolation of cells from the surrounding environment, after their transplantation and the maintenance of the normal cellular physiology. Factors affecting the efficacy of microdevices, which include size, size distribution, morphology, and porosity are all highly dependent on the method of preparation. In this respect, microfluidic based methods offer a promising strategy to fabricate highly uniform and morphologically controlled microdevices with tunable chemical and mechanical properties. In the current review, various cell microencapsulation procedures, based on a microfluidics, are critically analyzed with a special focus on the effect of the procedure on the morphology, viability and functions of the embedded cells. Moreover, a brief introduction about the optimal characteristics of microdevice intended for cell encapsulation, together with the currently used materials for the production is reported. A further challenging application of microfluidics for the development of "living microchip" is also presented. Finally, the limitations, challenging and future work on the microfluidic approach are also discussed.

Considerations in binding diblock copolymers on hydrophilic alginate beads for providing an immunoprotective membrane

Alginate-based microcapsules are being proposed for treatment of many types of diseases. A major obstacle however in the successes is that these capsules are having large lab-to-lab variations. To make the process more reproducible, we propose to cover the surface of alginate capsules with diblock polymers that can form polymer brushes. In the present study, we describe the stepwise considerations for successful application of diblock copolymer of polyethylene glycol (PEG) and poly-l-lysine (PLL) on the surface of alginate beads. Special procedures had to be designed as alginate beads are hydrophilic and most protocols are designed for hydrophobic biomaterials. The successful attachment of diblock copolymer and the presence of PEG blocks on the surface of the capsules were studied by fluorescence microscopy. Longer time periods, that is, 30–60 min, are required to achieve saturation of the surface. The block lengths influenced the strength of the capsules. Shorter PLL blocks resulted in less stable capsules. Adequate permeability of the capsules was achieved with poly(ethylene glycol)-block-poly(l-lysine hydrochloride) (PEG₄₅₄-b-PLL₁₀₀) diblock copolymers. The capsules were a barrier for immunoglobulin G. The PEG₄₅₄-b-PLL₁₀₀ capsules have similar mechanical properties as PLL capsules. Minor immune activation of nuclear factor κB in THP-1 monocytes was observed with both PLL and PEG₄₅₄-b-PLL₁₀₀ capsules prepared from purified alginate. Our results show that we can successfully apply block copolymers on the surface of hydrophilic alginate beads without interfering with the physicochemical properties.

Microencapsulated cell tracking

Microencapsulation of therapeutic cells has been widely pursued to achieve cellular immunoprotection following transplantation. Initial clinical studies have shown the potential of microencapsulation using semi-permeable alginate layers, but much needs to be learned about the optimal delivery route, in vivo pattern of engraftment, and microcapsule stability over time. In parallel with noninvasive imaging techniques for 'naked' (i.e. unencapsulated) cell tracking, microcapsules have now been endowed with contrast agents that can be visualized by (1) H MRI, (19) F MRI, X-ray/computed tomography and ultrasound imaging. By placing the contrast agent formulation in the extracellular space of the hydrogel, large amounts of contrast agents can be incorporated with negligible toxicity. This has led to a new generation of imaging biomaterials that can render cells visible with multiple imaging modalities.

Stem cell microencapsulation for phenotypic control, bioprocessing, and transplantation

Cell microencapsulation has been utilized for decades as a means to shield cells from the external environment while simultaneously permitting transport of oxygen, nutrients, and secretory molecules. In designing cell therapies, donor primary cells are often difficult to obtain and expand to appropriate numbers, rendering stem cells an attractive alternative due to their capacities for self-renewal, differentiation, and trophic factor secretion. Microencapsulation of stem cells offers several benefits, namely the creation of a defined microenvironment which can be designed to modulate stem cell phenotype, protection from hydrodynamic forces and prevention of agglomeration during expansion in suspension bioreactors, and a means to transplant cells behind a semi-permeable barrier, allowing for molecular secretion while avoiding immune reaction. This review will provide an overview of relevant microencapsulation processes and characterization in the context of maintaining stem cell potency, directing differentiation, investigating scalable production methods, and transplanting stem cells for clinically relevant disorders.

Macro- or microencapsulation of pig islets to cure type 1 diabetes

Although allogeneic islet transplantation can successfully cure type 1 diabetes, it has limited applicability. For example, organs are in short supply; several human pancreas donors are often needed to treat one diabetic recipient; the intrahepatic site may not be the most appropriate site for islet implantation; and immunosuppressive regimens, which are associated with side effects, are often required to prolong survival of the islet graft. An alternative source of insulin-producing cells would therefore be of major interest. Pigs represent a possible alternative source of beta cells. Grafting of pig islets may appear difficult because of the immunologic species barrier, but pig islets have been shown to function in primates for at least 6 mo with clinically incompatible immunosuppression. Therefore, a bioartificial pancreas made of encapsulated pig islets may resolve issues associated with islet allotransplantation. Although several groups have shown that encapsulated pig islets are functional in small-animal models, less is known about the use of bioartificial pancreases in large-animal models. In this review, we summarize current knowledge of encapsulated pig islets, to determine obstacles to implantation in humans and possible solutions to overcome these obstacles.

Molecular Biocompatibility Evaluation of Poly-L-Ornithine-Coated Alginate Microcapsules by Investigating mRNA Expression of Pro-Inflammatory Cytokines

Following a polyelectrolytical complex reaction, the poly-L-ornithine (PLO)-alginate microcapsules were prepared by coating PLO on calcium alginate beads which were produced by a high-voltage electrostatic droplet generator. The biocompatibility of the microcapsules at the molecular level was evaluated through investigating the mRNA expression of pro-inflammatory cytokines; that is, the effect of the PLO coating of alginate beads on the mRNA expression of TNF-α, IL-1β, and IL-6 were measured using the RT-PCR method. The resulting PLO-coated alginate microcapsules have a smooth surface with a mean diameter of 309µm. The molecular biocompatibility studies show that coating microcapsules with PLO has no significant effect on the biocompatibility of alginate microcapsules (p>0.05), and both alginate microcapsules and PLO-coated microcapsules are significantly different from the positive control (p<0.05); however, both are also capable of causing an inflammatory response at a molecular level since both are significantly different from the blank control (p<0.05). Furthermore, with the increase in concentration of microcapsules or co-cultured time, part of the mRNA expression of cytokines is significantly increased. The results also demonstrate that the method used in this study, co-incubating the microcapsules with macrophages and measuring the mRNA expression of cytokines by RT-PCR, may be a useful method for evaluating the biocompatibility of coating materials of microcapsules.

Materials for diabetes therapeutics

This review is focused on the materials and methods used to fabricate closed-loop systems for type 1 diabetes therapy. Herein, we give a brief overview of current methods used for patient care and discuss two types of possible treatments and the materials used for these therapies-(i) artificial pancreases, comprised of insulin producing cells embedded in a polymeric biomaterial, and (ii) totally synthetic pancreases formulated by integrating continuous glucose monitors with controlled insulin release through degradable polymers and glucose-responsive polymer systems. Both the artificial and the completely synthetic pancreas have two major design requirements: the device must be both biocompatible and be permeable to small molecules and proteins, such as insulin. Several polymers and fabrication methods of artificial pancreases are discussed: microencapsulation, conformal coatings, and planar sheets. We also review the two components of a completely synthetic pancreas. Several types of glucose sensing systems (including materials used for electrochemical, optical, and chemical sensing platforms) are discussed, in addition to various polymer-based release systems (including ethylene-vinyl acetate, polyanhydrides, and phenylboronic acid containing hydrogels).

Rapid and cost-effective fabrication of selectively permeable calcium-alginate microfluidic device using "modified" embedded template method

In this paper, we have presented a non-lithographic embedded template method for rapid and cost-effective fabrication of a selectively permeable calcium-alginate (Ca-alginate) based microfluidic device with long serpentine delay channel. To demonstrate the versatility of the presented method, we have demonstrated two different strategies to fabricate serpentine long delay channels without using any sophisticated microfabrication techniques, in formal lab atmosphere. The procedure presented here, also, enables the preparation of a multilayered microfluidic device with channels of varying dimensions, in a single device without using any sophisticated micromachining instrumentation. In addition, we have also qualitatively studied the diffusion of small and large molecules from a Ca-alginate based microfluidic device and proposed a method to effectively control the out-flow of macro biomolecules from the crosslinked Ca-alginate matrix to create a selectively permeable matrix required for various biological and biomimetic applications, as mentioned in the Introduction section of this work.

Alginate microbeads are complement compatible, in contrast to polycation containing microcapsules, as revealed in a human whole blood model

Alginate microbeads and microcapsules are presently under evaluation for future cell-based therapy. Defining their inflammatory properties with regard to humans is therefore essential. A lepirudine-based human whole blood model was used as an inflammation predictor by measuring complement and leukocyte stimulation. Alginate microbeads were complement-compatible since they did not activate complement as measured by the soluble terminal complement complex (sTCC), Bb or the anaphylatoxins C3a and C5a. In addition, alginate microbeads were free of surface adherent leukocytes. In contrast, microcapsules containing poly-L-lysine (PLL) induced elevated levels of sTCC, Bb, C3a and C5a, surface active C3 convertase and leukocyte adhesion. The soluble PLL induced elevated levels of sTCC and up-regulated leukocyte CD11b expression. PMCG microcapsules containing poly(methylene-co-guanidine) complexed with sodium alginate and cellulose sulfate triggered a fast sTCC response and C3 deposition. The PMCG microcapsules were still less activating than PLL-containing microcapsules as a function of time. The amounts of anaphylatoxins C3a and C5a were diminished by the PMCG microcapsules, whereas leukocyte adherence demonstrated surface activating properties. We propose the whole blood model as an important tool for measuring bioincompatibility of microcapsules and microbeads for future applications as well as determining the mechanisms leading to inflammatory reactions.

Bromo-oxidation reaction in enzyme-entrapped alginate hollow microfibers

In this article, the authors present the fabrication of an enzyme-entrapped alginate hollow fiber using a microfluidic device. Further use of enzyme-entrapped alginate hollow fibers as a biocatalytic microchemical reactor for chemical synthesis is also deliberated in this article. To ensure that there is no enzyme leaching from the fiber, fiber surfaces were coated with chitosan. To confine the mobility of reactants and products within the porous hollow fibers the entire fibers were embedded into a transparent polydimethylsiloxane (PDMS) matrix which also works as a support matrix. A vanadium-containing bromoperoxidase enzyme isolated from Corallina confusa was used as a model enzyme to demonstrate the use of these alginate hollow-fiber reactors in bromo-oxidation of phenol red to bromophenol blue at different dye flow rates. Stability of the entrapped enzyme at different temperatures and the effect of the chitosan coating on the reaction conversion were also studied. It was observed that molecules as big as 27 kDa can be retained in the matrix after coating with chitosan while molecules with molecular-weight of around 378 Da can still diffuse in and out of the matrix. The kinetic conversion rate in this microfluidic bioreactor was more than 41-fold faster when compared with the standard test-tube procedure.

Islet transplantation and encapsulation: an update on recent developments

Human islet transplantation can provide good glycemic control in diabetic recipients without exogenous insulin. However, a major factor limiting its application is the recipient's need to adhere to life-long immunosuppression, something that has serious side effects. Microencapsulating human islets is a strategy that should prevent rejection of the grafted tissue without the need for anti-rejection drugs. Despite promising studies in various animal models, the encapsulated human islets so far have not made an impact in the clinical setting. Many non-immunological and immunological factors such as biocompatibility, reduced immunoprotection, hypoxia, pericapsular fibrotic overgrowth, effects of the encapsulation process and post-transplant inflammation hamper the successful application of this promising technology. In this review, strategies are discussed to overcome the above-mentioned factors and to enhance the survival and function of encapsulated insulin-producing cells, whether in islets or surrogate β-cells. Studies at our center show that barium alginate microcapsules are biocompatible in rodents, but not in humans, raising concerns over the use of rodents to predict outcomes. Studies at our center also show that the encapsulation process had little or no effect on the cellular transcriptome of human islets and on their ability to function either in vitro or in vivo. New approaches incorporating further modifications to the microcapsule surface to prevent fibrotic overgrowth are vital, if encapsulated human islets or β-cell surrogates are to become a viable therapy option for type 1 diabetes in humans.

Influence of different polymeric gels on the ectopic bone forming ability of an osteoinductive biphasic calcium phosphate ceramic

To evaluate moldable osteoinductive putties for bone repair we combined microstructured biphasic calcium phosphate (BCP) particles with five different polymeric gels, carboxymethyl cellulose (CMC), Pluronic(®) F-127 (PLU), polyvinyl alcohol (PVA), chitosan (CHI) and alginate (ALG). In vitro gel dissolution showed that CMC, PLU and ALG gels dissolved rapidly (within hours), while the CHI gel took several days and the PVA gel did not dissolve within 2 weeks. Implanting the putty formulations into sheep muscle for 12 weeks demonstrated ectopic bone formation in the control BCP group as well as the putties prepared with dissolving gels (CMC, PLU, ALG and CHI). Bone was not seen in the putty comprising PVA. Quantitative data showed that the CMC and PLU gels did not significantly affect the osteoinductivity of BCP granules, while the ALG and CHI gels showed a significant decrease in bone formation. These results suggest that the dissolvability and chemistry of the gels may be factors affecting the osteoinduction of the putties.

Biocompatibility and physicochemical characteristics of alginate-polycation microcapsules

There is a need for better understanding of the biocompatibility of alginate-polycation microcapsules based on their physicochemical characteristics. Microcapsules composed of alginate with 44% (IntG) or 71% (HiG) guluronate, gelled with calcium (Ca) or barium (Ba) and coated with poly-L-lysine (PLL) or poly-l-ornithine (PLO), followed by IntG alginate were compared. For microcapsules with an IntG(Ca) gel core, using PLO instead of PLL resulted in less immune cell adhesion after 2 days in C57BL/6J mice. The PLO microcapsules were also characterized by greater hydrophilicity and superior resistance to swelling and damage under osmotic stress. For microcapsules with a PLL membrane, replacing the IntG(Ca) gel core with IntG(Ba) or HiG(Ca) gel resulted in stronger immune responses (p<0.05). This was explained by poor penetration of PLL into the gel, as demonstrated by Fourier transform infrared spectroscopy analyses and membrane rupturing during osmotic swelling. X-ray photoelectron spectroscopy analyses show that all microcapsules had the same amount of polycation at their surface. Moreover, alginate coatings had non-significant effects on the biocompatibility and physicochemical properties of the microcapsules. Thus, alginate-polycation interactions for membrane formation are more important for biocompatibility than either the quantity of polycation at the surface or the alginate coating.

Investigation of layer-by-layer assembly of polyelectrolytes on fully functional human red blood cells in suspension for attenuated immune response

The encapsulation of live cells with polymeric coat-ings is a versatile approach to modulate or control the response cells to their environment. The layer-by-layer (LbL) self-assembly of nonimmunogenic polyelectrolytes is employed here to attenuate or suppress the binding of antibodies to live red blood cells (RBCs) and, consequently, decrease their inherent immunogenicity toward foreign RBCs. The optimized shell was composed of four bilayers of alginate (AL) and chitosan-graft-phosphorylcholine (CH-PC) surrounded by two bilayers of AL and poly-l-lysine-graft-polyethylene glycol (PLL-PEG). Experimental parameters, including the polyelectrolytes and RBCs concentrations and the cell handling and purification protocols, were optimized to achieve effective encapsulation of live and functional RBCs in suspension. The viability and functionality of coated RBCs were confirmed by a hemolysis assay and by their ability to take up oxygen. The successful immunocamouflage of RBCs was confirmed by observing that the recognition of the ABO/D (Rh) blood group antigens present on the surface of RBCs by their respective antibodies was muted in the case of coated RBCs. The results of this studies mark an important step toward the production of universal RBCs.

Biocompatibility investigation of polyethylene glycol and alginate-poly-L-lysine for islet encapsulation

The use of microencapsulation with alginate-poly-l-lysine (PLL) as the encapsulation material has been hampered by overgrowth of collagen around implanted capsules. Studies have shown that poly(ethylene glycol) (PEG) has higher biocompatibility than PLL. In this project, we examined the biocompatibility of PEG in comparison with PLL in the Lewis rat model. Capsules made from either PEG or PLL were implanted into Lewis rats in three anatomical sites: subcutaneous (SC), intramuscular (IM), and intra-epididymis (IE). After 2 or 4 weeks, capsules were retrieved, sectioned, and stained with Sirius Red for analysis of fibrotic overgrowth with ImageJ software. The results were statistically analyzed using either unpaired t test or analysis of variance (ANOVA). PEG demonstrated significantly better biocompatibility in SC, at both 2 and 4 weeks, and IE at 2 weeks (p < 0.0001). No significant differences were found in IM implantation at either time point (p = 0.36) between the two materials. However, there was significantly heavier fibrotic overgrowth around PEG capsules in IE than PLL capsules at 4 weeks (p < 0.01). When compared among the anatomical sites, IM implantation demonstrated significantly less fibrotic overgrowth than other sites for both materials (p < 0.01). In conclusion, PLL and PEG may induce different levels of fibrosis based on anatomical location and duration of implantation.

Use of tissue engineering in treatment of the male genitourinary tract abnormalities

INTRODUCTION

A variety of congenital and acquired male genitourinary tract abnormalities can lead to organ damage or tissue loss that requires surgical reconstruction. Traditional reconstructive methods do not produce consistent satisfactory structural or functional replacement and may damage the genitourinary tract. Tissue engineering provides a promising alternative for the treatment of these disorders.

AIM

The aim of this article is to provide an update on clinical and experimental evidence concerning the application of tissue engineering to treatment of abnormalities in the male genitourinary tract system.

METHODS

A PubMed search was performed to retrieve relevant clinical and basic literature.

MAIN OUTCOME MEASURES

The topics discussed in this review include the experimental and clinical application of tissue engineering for reconstruction of the urethra, penis, testis, and prostate.

RESULTS

Tissue engineering techniques can provide a plentiful source of healthy tissue for reconstructive purposes. Acellular matrix scaffold and seed cells are two key elements in tissue engineering. Proper employment of seed cells and scaffold material may result in synergistic effects. Moreover, new tissue engineering technologies are being transferred from the laboratory to clinical practice.

CONCLUSIONS

Tissue engineering provides biological substitutes that can restore and maintain normal function in diseased and injured tissues, thus providing an effective technique for regeneration of the male genitourinary tract.

Alginate composition effects on a neural stem cell-seeded scaffold

The purpose of this study was to evaluate the effects of alginate composition on the neurotrophic factor release, viability, and proliferation of encapsulated neural stem cells (NSCs), as well as on the mechanical stability of the scaffold itself. Four compositions were tested: a high guluronic acid (68%) and a high mannuronic acid (54%) content alginate, with or without a poly-L-lysine (PLL) coating layer. Enzyme-linked immunosorbent assay was used to quantify the release of brain-derived neurotrophic factor, glial-derived neurotrophic factor, and nerve growth factor from the encapsulated cells. All three factors were detected from encapsulated cells only when a high L-guluronic acid alginate without PLL was used. Additionally, capsules with this composition remained intact more frequently when exposed to solutions of low osmolarity, potentially indicating superior mechanical stability. Alginate beads with a PLL-coated, high D-mannuronic acid composition were the most prone to breakage in the osmotic pressure test, and were too fragile for histology and proliferation assays after 1 week in vitro. NSCs survived and proliferated in the three remaining alginate compositions similarly over the 21-day study course irrespective of scaffold condition. NSC-seeded alginate beads with a high L-guluronic acid, non-PLL-coated composition may be useful in the repair of injured nervous tissue, where the mechanism is the secretion of neuroprotective factors. We verify the neuroprotective effects of medium conditioned by NSC-seeded alginate beads on the serum withdrawal-mediated death of PC-12 cells here.

Treatment of diabetes with encapsulated islets

Cell encapsulation has been proposed for the treatment of a wide variety of diseases since it allows for transplantation of cells in the absence of undesired immunosuppression. The technology has been proposed to be a solution for the treatment of diabetes since it potentially allows a mandatory minute-to-minute regulation of glucose levels without side-effects. Encapsulation is based on the principle that transplanted tissue is protected for the host immune system by a semipermeable capsule. Many different concepts of capsules have been tested. During the past two decades three major approaches of encapsulation have been studied. These include (i) intravascular macrocapsules, which are anastomosed to the vascular system as AV shunt, (ii) extravascular macrocapsules, which are mostly diffusion chambers transplanted at different sites and (iii) extravascular microcapsules transplanted in the peritoneal cavity. The advantages and pitfalls of the three approaches are discussed and compared in view of applicability in clinical islet transplantation.

Silencing red blood cell recognition toward Anti-A antibody by means of polyelectrolyte layer-by-layer assembly in a two-dimensional model system

Silencing the antigenic response of red blood cells (RBCs) is a prerequisite toward the development of universal blood transfusion. Using a two-dimensional (2D) model whereby nonfixed RBCs are adsorbed on a human fibronectin (HFN)-coated surface, we demonstrate that the layer-by-layer (LbL) assembly technique of biocompatible polyelectrolytes can be employed to achieve the immunocamouflage of RBCs against the Anti-A antibody while maintaining the integrity and viability of the cells. The multilayered film consisted of a protecting shell (P-shell), containing five bilayers of chitosan-graft-phosphorylcholine (CH-PC) and sodium hyaluronate (HA), covered by a camouflage shell (C-shell) made up of five bilayers of poly-(L-lysine)-graft-poly(ethylene glycol) (PLL-PEG) and alginate (AL). Control experiments in which RBCs were coated by (CH-PC/HA)(10) bilayers indicated that the two polyelectrolytes alone did not prevent immunorecognition. The LbL film formation on RBCs and model substrates was monitored by quartz crystal microbalance with dissipation factor (QCM-D) and analyzed through zeta-potential measurements, atomic force microscopy (AFM), and optical microscopy. Antibody interaction with the coated RBCs was investigated by QCM-D, fluorescence microscopy, and hemolysis assays. Results from these measurements demonstrated that the hybrid LbL system built-up with different sets of polyelectrolytes was able to protect the RBCs from hemolysis and recognition by the Anti-A antibody.

Anti-inflammatory peptide-functionalized hydrogels for insulin-secreting cell encapsulation

Pancreatic islet encapsulation within semi-permeable materials has been proposed for transplantation therapy of type I diabetes mellitus. Polymer hydrogel networks used for this purpose have been shown to provide protection from islet destruction by immunoreactive cells and antibodies. However, one of the fundamental deficiencies with current encapsulation methods is that the permselective barriers cannot protect islets from cytotoxic molecules of low molecular weight that are diffusible into the capsule material, which subsequently results in beta-cell destruction. Use of materials that can locally inhibit the interaction between the permeable small cytotoxic factors and islet cells may prolong the viability and function of encapsulated islet grafts. Here we report the design of anti-inflammatory hydrogels supporting islet cell survival in the presence of diffusible pro-inflammatory cytokines. We demonstrated that a poly(ethylene glycol)-containing hydrogel network, formed by native chemical ligation and presenting an inhibitory peptide for islet cell surface IL-1 receptor, was able to maintain the viability of encapsulated islet cells in the presence of a combination of cytokines including IL-1 beta, TNF-alpha, and INF-gamma. In stark contrast, cells encapsulated in unmodified hydrogels were mostly destroyed by cytokines which diffused into the capsules. At the same time, these peptide-modified hydrogels were able to efficiently protect encapsulated cells against beta-cell specific T-lymphocytes and maintain glucose-stimulated insulin release by islet cells. With further development, the approach of encapsulating cells and tissues within hydrogels presenting anti-inflammatory agents may represent a new strategy to improve cell and tissue graft function in transplantation and tissue engineering applications.

Effect of alginate on innate immune activation of macrophages

Alginate, a natural polysaccharide, has been widely used in tissue engineering and drug delivery, but like other biomaterials, it causes inflammation by unknown mechanisms. We hypothesized that alginate would stimulate innate immune responses through macrophage receptors. In this study, we showed that sodium alginate induced activation of macrophage-like cells (RAW264.7) through the NF-kappaB pathway. Production of proinflammatory cytokines, such as IL-1beta, IL-6, IL-12, and TNF-alpha was time and dose-dependent. Treatment with alginate solution caused responses that closely paralleled stimulation by lipopolysaccharide in timing and magnitude. These data suggest that sodium alginate causes innate immune responses through NF-kappaB activation and likely activates the same pathways as pathogen recognition.

Phosphorylcholine-Containing Polymers for Use in Cell Encapsulation

A model system for encapsulation of pancreatic islets which has potential properties for improving biocompatibility and immunosuppression was investigated. In vitro and in vivo studies have shown that phosphorylcholine-containing polymers have high biocompatibility due to low adsorption of proteins and reduced thrombus formation. Encapsulation of islets isolated from rats with a compound membrane composed of phosphorylcholine-containing polymers and cellulose acetate led to rapid insulin production and diffusion across the membrane in response to glucose challenge. The phosphorylcholine-containing polymer had a molecular weight of about 1.3 x 10(4) Da. The polymer-coated membrane excluded larger molecules such as IgG (molecular weight 150 kDa), thereby acting as a physical immuno-barrier, but allowed smaller molecules such as glucose and insulin to pass through.

Adsorption of human immunoglobulin to implantable alginate-poly-L-lysine microcapsules: effect of microcapsule composition

Alginate-poly-L-lysine-alginate (APA) microcapsules continue to be the most widely studied device for the immuno-protection of transplanted therapeutic cells. Producing APA microcapsules having a reproducible and high level of biocompatibility requires an understanding of the mechanisms of the immune response towards the implants. Here, we investigate the adsorption of immunoglobulins (IgG, IgM, and IgA) onto the surface of APA microcapsules in vitro after their exposure to human serum and peritoneal fluid. Immunoglobulins (Ig) are considered to be opsonizing proteins, thus they tend to mediate inflammation when adsorbed to foreign surfaces. Ig adsorption was monitored using direct immunofluorescence. The amount of Ig adsorbed to the microcapsule surface was not significantly influenced by the guluronic acid content nor the purity level of the alginate, although microcapsules of intermediate-G purified alginate corresponded with the lowest adsorption levels. Ig adsorption was negligible when the poly-L-lysine membrane was omitted, suggesting that positive charges at the microcapsule surface are responsible for binding Ig.