Reverse Transcription Recombinase Polymerase Amplification Coupled with CRISPR-Cas12a for Facile and Highly Sensitive Colorimetric SARS-CoV-2 Detection

Fluorescence and Colorimetric Analysis of African Swine Fever Virus Based on the RPA-Assisted CRISPR/Cas12a Strategy

It is well-established that different detection modes are necessary for corresponding applications, which can effectively reduce matrix interference and improve the detection accuracy. Here, we reported a magnetic separation method based on recombinase polymerase amplification (RPA)-assisted clustered regularly interspaced short palindromic repeats (CRISPR)/Cas12a for dual-mode analysis of African swine fever virus (ASFV) genes, including colorimetry and fluorescence. The ASFV gene was selected as the initial RPA template to generate the amplicon. The RPA amplicon was then recognized by CRISPR-associated RNA (crRNA), activating the trans-cleavage activity of Cas12a and leading to the nonspecific cleavage of ssDNA as well as a significant release of alkaline phosphatase (ALP) in the ALP-ssDNA modified magnetic bead. The released ALP can catalyze para-nitrophenyl phosphate to generate para-nitrophenol, resulting in substantial changes in absorbance and fluorescence, both of which can be used for detection with the naked eye. This strategy allows the sensitive detection of ASFV DNA, with a 20 copies/mL detection limit; no cross-reactivity with other viruses was observed. A good linear relationship was obtained in serum. In addition, this sensor displayed 100% specificity and sensitivity for clinical sample analysis. This method integrates the high sensitivity of fluorescence with easy readout of colorimetry and enables a simple, low-cost, and highly sensitive dual-mode detection of viral nucleic acid, thereby providing a broad prospect for the practical application in the diagnosis of virus infection.

Gold Nanomaterials-Implemented CRISPR-Cas Systems for Biosensing

Due to their superiority in the simple design and precise targeting, clustered regularly interspaced short palindromic repeats (CRISPR)-Cas systems have attracted significant interest for biosensing. On the one hand, CRISPR-Cas systems have the capacity to precisely recognize and cleave specific DNA and RNA sequences. On the other hand, CRISPR-Cas systems such as orthologs of Cas9, Cas12, and Cas13 exhibit cis-cleavage or trans-cleavage activities after recognizing the target sequence. Owing to the cleavage activities, CRISPR-Cas systems can be designed for biosensing by degrading tagged nucleic acids to produce detectable signals. To meet the requirements of point-of-care detection and versatile signal readouts, gold nanomaterials with excellent properties such as high extinction coefficients, easy surface functionalization, and biocompatibility are implemented in CRISPR-Cas-based biosensors. In combination with gold nanomaterials such as gold nanoparticles, gold nanorods, and gold nanostars, great efforts are devoted to fabricating CRISPR-Cas-based biosensors for the detection of diverse targets. This review focuses on the current advances in gold nanomaterials-implemented CRISPR-Cas-based biosensors, particularly the working mechanism and the performance of these biosensors. CRISPR-Cas systems, including CRISPR-Cas9, CRISPR-Cas12a, and CRISPR-Cas13a are discussed and highlighted. Meanwhile, prospects and challenges are also discussed in the design of biosensing strategies based on gold nanomaterials and CRISPR-Cas systems.

Emerging trends in point-of-care biosensing strategies for molecular architectures and antibodies of SARS-CoV-2

COVID-19, a highly contagious viral infection caused by the occurrence of severe acute respiratory syndrome coronavirus (SARS-CoV-2), has turned out to be a viral pandemic then ravaged many countries worldwide. In the recent years, point-of-care (POC) biosensors combined with state-of-the-art bioreceptors, and transducing systems enabled the development of novel diagnostic tools for rapid and reliable detection of biomarkers associated with SARS-CoV-2. The present review thoroughly summarises and discusses various biosensing strategies developed for probing SARS-CoV-2 molecular architectures (viral genome, S Protein, M protein, E protein, N protein and non-structural proteins) and antibodies as a potential diagnostic tool for COVID-19. This review discusses the various structural components of SARS-CoV-2, their binding regions and the bioreceptors used for recognizing the structural components. The various types of clinical specimens investigated for rapid and POC detection of SARS-CoV-2 is also highlighted. The importance of nanotechnology and artificial intelligence (AI) approaches in improving the biosensor performance for real-time and reagent-free monitoring the biomarkers of SARS-CoV-2 is also summarized. This review also encompasses existing practical challenges and prospects for developing new POC biosensors for clinical monitoring of COVID-19.

Nanotechnology-based diagnostic methods for coronavirus: From nucleic acid extraction to amplification

The recent emergence of human coronaviruses (CoVs) causing severe acute respiratory syndrome (SARS) is posing a great threat to global public health. Therefore, the rapid and accurate identification of pathogenic viruses plays a vital role in selecting appropriate treatments, saving people's lives and preventing epidemics. Nucleic acids, including deoxyribonucleic acid (DNA) and ribonucleic acid (RNA), are natural biopolymers composed of nucleotides that store, transmit, and express genetic information. Applications of nucleic acid detection range from genotyping and genetic prognostics, to expression profiling and detection of infectious disease. The nucleic acid detection for infectious diseases is widely used, as evidenced by the widespread use of COVID-19 tests for the containment of the pandemic. Nanotechnology influences all medical disciplines and has been considered as an essential tool for novel diagnostics, nanotherapeutics, vaccines, medical imaging, and the utilization of biomaterials for regenerative medicine. In this review, the recent advances in the development of nanotechnology-based diagnostic methods for coronavirus, and their applications in nucleic acid detection are discussed in detail. The techniques for the amplification of nucleic acids are summarized, as well as the use of magnetic nanoparticles for nucleic acid extraction. Besides, current challenges and future prospects are proposed, along with the great potential of nanotechnology for the effective diagnosis of coronavirus.

A novel nanoparticle surface-constrained CRISPR-Cas12a 3D DNA walker-like nanomachines for sensitive and stable miRNAs detection

The CRISPR-Cas system has broad prospects as a new type of nucleic acid signal amplification technology based on the trans-cleavage activity of Cas12a to single-stranded DNA, but the trans-cleavage reaction efficiency is relatively low in solution. In order to overcome this negative factor, a new 3D DNA nanomachine whose CRISPR-Cas12a is limited to the surface of nanoparticles is used for sensitive and stable detection of miRNA. By loading Cas12a activator onto spherical nucleic acid (SNA), the CRISPR-Cas12a activator system on the surface of Au nanoparticles (AuNPs) acts as a walker to carry out continuous recognition-walking-cutting reaction on the surface of AuNPs, which enhances the trans-cleavage activity of Cas12a to SNAs. Benefiting from the confinement effect of spherical nucleic acids surface, a 3D DNA nanomachine has been developed for the detection of miRNA-21, which has achieved high sensitivity and accuracy, and the detection limit is able to reach 8.0 pM. This new 3D DNA walker-like nanomachine provided another insight for future bioanalysis and early clinical diagnoses of disease and liquid biopsy.

Ultrasensitive and amplification-free detection of SARS-CoV-2 RNA using an electrochemical biosensor powered by CRISPR/Cas13a

This study proposed a CRISPR/Cas13a-powered electrochemical multiplexed biosensor for detecting SARS-CoV-2 RNA strands. Current SARS-CoV-2 diagnostic methods, such as reverse transcription PCR (RT-PCR), are primarily based on nucleic acid amplification (NAA) and reverse transcription (RT) processes, which have been linked to significant issues such as cross-contamination and long turnaround times. Using a CRISPR/Cas13a system integrated onto an electrochemical biosensor, we present a multiplexed and NAA-free strategy for detecting SARS-CoV-2 RNA fragments. SARS-CoV-2 S and Orf1ab genes were detected in both synthetic and clinical samples. The CRISPR/Cas13a-powered biosensor achieved low detection limits of 2.5 and 4.5 ag/µL for the S and Orf1ab genes, respectively, successfully meeting the sensitivity requirement. Furthermore, the biosensor's specificity, simplicity, and universality may position it as a potential rival to RT-PCR.

Cas12a/Guide RNA-Based Platforms for Rapidly and Accurately Identifying Staphylococcus aureus and Methicillin-Resistant S. aureus

In order to ensure the prevention and control of methicillin-resistant Staphylococcus aureus (MRSA) infection, rapid and accurate detection of pathogens and their resistance phenotypes is a must. Therefore, this study aimed to develop a fast and precise nucleic acid detection platform for identifying S. aureus and MRSA. We initially constructed a CRISPR-Cas12a detection system by designing single guide RNAs (sgRNAs) specifically targeting the thermonuclease (nuc) and mecA genes. To increase the sensitivity of the CRISPR-Cas12a system, we incorporated PCR, loop-mediated isothermal amplification (LAMP), and recombinase polymerase amplification (RPA). Subsequently, we compared the sensitivity and specificity of the three amplification methods paired with the CRISPR-Cas12a system. Finally, the clinical performance of the methods was tested by analyzing the fluorescence readout of 111 clinical isolates. In order to visualize the results, lateral-flow test strip technology, which enables point-of-care testing, was also utilized. After comparing the sensitivity and specificity of three different methods, we determined that the nuc-LAMP-Cas12a and mecA-LAMP-Cas12a methods were the optimal detection methods. The nuc-LAMP-Cas12a platform showed a limit of detection (LOD) of 10 aM (~6 copies μL-1), while the mecA-LAMP-Cas12a platform demonstrated a LOD of 1 aM (~1 copy μL-1). The LOD of both platforms reached 4 × 103 fg/μL of genomic DNA. Critical evaluation of their efficiencies on 111 clinical bacterial isolates showed that they were 100% specific and 100% sensitive with both the fluorescence readout and the lateral-flow readout. Total detection time for the present assay was approximately 80 min (based on fluorescence readout) or 85 min (based on strip readout). These results indicated that the nuc-LAMP-Cas12a and mecA-LAMP-Cas12a platforms are promising tools for the rapid and accurate identification of S. aureus and MRSA. IMPORTANCE The spread of methicillin-resistant Staphylococcus aureus (MRSA) poses a major threat to global health. Isothermal amplification combined with the trans-cleavage activity of Cas12a has been exploited to generate diagnostic platforms for pathogen detection. Here, we describe the design and clinical evaluation of two highly sensitive and specific platforms, nuc-LAMP-Cas12a and mecA-LAMP-Cas12a, for the detection of S. aureus and MRSA in 111 clinical bacterial isolates. With a limit of detection (LOD) of 4 × 103 fg/μL of genomic DNA and a turnaround time of 80 to 85 min, the present assay was 100% specific and 100% sensitive using either fluorescence or the lateral-flow readout. The present assay promises clinical application for rapid and accurate identification of S. aureus and MRSA in limited-resource settings or at the point of care. Beyond S. aureus and MRSA, similar CRISPR diagnostic platforms will find widespread use in the detection of various infectious diseases, malignancies, pharmacogenetics, food contamination, and gene mutations.

Sensitive and selective DNA detecting electrochemical sensor via double cleaving CRISPR Cas12a and dual polymerization on hyperbranched rolling circle amplification

Electrochemical sensors are widely used for nucleic acid detection. However, they exhibit low sensitivity and specificity. To overcome these limitations, DNA amplification method is necessary. In this study, we introduced CRISPR (Clustered regularly interspaced short palindromic repeats) Cas12a-dependent hyperbranched rolling circle amplification (HRCA) into an electrochemical sensor platform. By resolving the existing false-positive issue of HRCA, CRISPR Cas12a determines the real positive amplification that able to enhance its sensitivity for extremely low concentrations of nucleic acids and specificity for single-point mutations. In detail, CRISPR Cas12a, which activates the nucleic acid amplification reaction, was used for both trans and cis cleavage for the first time. Finally, selectively amplified DNA was detected using a screen-printed electrode. Using the change in surface coverage by DNA, the electrochemical sensor detected a decrease in the redox signal. In summary, combining a novel DNA amplification method and electrochemical sensor platform, our proposed method compensates for the shortcomings of existing RCA and hyperbranched RCA, secures a high sensitivity of 10 aM, and overcomes false-positivity problems. Moreover, such creative applications of CRISPR Cas12a may lead to the expansion of its applications to other nucleic acid amplification methods.

Recent progress in nucleic acid detection with CRISPR

Recent advances in CRISPR-based biotechnologies have greatly expanded our capabilities to repurpose CRISPR for the development of molecular diagnostic systems. The key attribute that allows CRISPR to be widely utilized is its programmable and highly specific nature. In this review, we first illustrate the principle of the class 2 CRISPR nucleases for molecular diagnostics which originates from their immunologic defence systems. Next, we present the CRISPR-based schemes in the application of diagnostics with amplification-assisted or amplification-free strategies. By highlighting some of the recent advances we interpret how general bioengineering methodologies can be integrated with CRISPR. Finally, we discuss the challenges and exciting prospects for future CRISPR-based biosensing development. We hope that this review will guide the reader to systematically learn the start-of-the-art development of CRISPR-mediated nucleic acid detection and understand how to apply the CRISPR nucleases with different design concepts to more general applications in diagnostics and beyond.

A portable thermostatic molecular diagnosis device based on high-efficiency photothermal conversion material for rapid field detection of SARS-CoV-2

The outbreak of the novel coronavirus (SARS-CoV-2) has seriously harmed human health and economic development worldwide. Studies have shown that timely diagnosis and isolation are the most effective ways to prevent the spread of the epidemic. However, the current polymerase chain reaction (PCR) based molecular diagnostic platform has the problems of expensive equipment, high operation difficulty, and the need for stable power resources support, so it is difficult to popularize in low-resource areas. This study established a portable (<300 g), low-cost (<$10), and reusable molecular diagnostic device based on solar energy photothermal conversion strategy, which creatively introduces a sunflower-like light tracking system to improve light utilization, making the device suitable for both high and low-light areas. The experimental results show that the device can detect SARS-CoV-2 nucleic acid samples as low as 1 aM within 30 min.

Development of a rapid and ultra-sensitive RNA:DNA hybrid immunocapture based biosensor for visual detection of SARS-CoV-2 RNA

The Development of reliable and field-compatible detection methods is essential to monitoring and controlling the spread of any global pandemic. We herein report a novel anti-RNA:DNA hybrid (anti-RDH) antibody-based biosensor for visual, colorimetric lateral flow assay, using gold nanoparticles, coupled with transcription-mediated-isothermal-RNA-amplification (TMIRA) for specific and sensitive detection of viral RNA. We have demonstrated its utility for SARS-CoV-2 RNA detection. This technique, which we have named RDH-LFA (anti-RNA:DNA hybrid antibody-based lateral flow assay), exploits anti-RDH antibody for immunocapture of viral RNA hybridized with specific DNA probes in lateral flow assay. This method uses biotinylated-oligonucleotides (DNAB) specific to SARS-CoV-2 RNA (vRNA) to generate a vRNA-DNAB hybrid. The biotin-tagged vRNA-DNAB hybrid molecules bind to streptavidin conjugated with gold nanoparticles. This hybrid complex is trapped by the anti-RDH antibody immobilized on the nitrocellulose membrane resulting in pink color signal leading to visual naked-eye detection in 1 minute. Combining RDH-LFA with isothermal RNA amplification (TMIRA) significantly improves the sensitivity (LOD:10 copies/µl) with a total turnaround time of an hour. More importantly, RDH-LFA coupled with the TMIRA method showed 96.6% sensitivity and 100% specificity for clinical samples when compared to a commercial gold standard reverse-transcription quantitative polymerase-chain-reaction assay. Thus, the present study reports a rapid, sensitive, specific, and simple method for visual detection of viral RNA, which can be used at the point-of-care without requiring sophisticated instrumentation.

New, fast, and precise method of COVID-19 detection in nasopharyngeal and tracheal aspirate samples combining optical spectroscopy and machine learning

Fast, precise, and low-cost diagnostic testing to identify persons infected with SARS-CoV-2 virus is pivotal to control the global pandemic of COVID-19 that began in late 2019. The gold standard method of diagnostic recommended is the RT-qPCR test. However, this method is not universally available, and is time-consuming and requires specialized personnel, as well as sophisticated laboratories. Currently, machine learning is a useful predictive tool for biomedical applications, being able to classify data from diverse nature. Relying on the artificial intelligence learning process, spectroscopic data from nasopharyngeal swab and tracheal aspirate samples can be used to leverage characteristic patterns and nuances in healthy and infected body fluids, which allows to identify infection regardless of symptoms or any other clinical or laboratorial tests. Hence, when new measurements are performed on samples of unknown status and the corresponding data is submitted to such an algorithm, it will be possible to predict whether the source individual is infected or not. This work presents a new methodology for rapid and precise label-free diagnosing of SARS-CoV-2 infection in clinical samples, which combines spectroscopic data acquisition and analysis via artificial intelligence algorithms. Our results show an accuracy of 85% for detection of SARS-CoV-2 in nasopharyngeal swab samples collected from asymptomatic patients or with mild symptoms, as well as an accuracy of 97% in tracheal aspirate samples collected from critically ill COVID-19 patients under mechanical ventilation. Moreover, the acquisition and processing of the information is fast, simple, and cheaper than traditional approaches, suggesting this methodology as a promising tool for biomedical diagnosis vis-à-vis the emerging and re-emerging viral SARS-CoV-2 variant threats in the future.

Elucidating the Role of CRISPR/Cas in Single-Step Isothermal Nucleic Acid Amplification Testing Assays

Developing assays that combine CRISPR/Cas and isothermal nucleic acid amplification has become a burgeoning research area due to the novelty and simplicity of CRISPR/Cas and the potential for point-of-care uses. Most current research explores various two-step assays by appending different CRISPR/Cas effectors to the end of different isothermal nucleic acid amplification methods. However, efforts in integrating both components into more ideal single-step assays are scarce, and poor-performing single-step assays have been reported. Moreover, lack of investigations into CRISPR/Cas in single-step assays results in incomplete understanding. To fill this knowledge gap, we conducted a systematic investigation by developing and comparing assays that share the identical recombinase polymerase amplification (RPA) but differ in CRISPR/Cas12a. We found that the addition of CRISPR/Cas12a indeed unlocks signal amplification but, at the same time, impedes RPA and that CRISPR/Cas12a concentration is a key parameter for attenuating RPA impediment and ensuring assay performance. Accordingly, we found that our protospacer adjacent motif (PAM)-free CRISPR/Cas12a-assisted RPA assay, which only moderately impeded RPA at its optimal CRISPR/Cas12a concentration, outperformed its counterparts in assay design, signal, sensitivity, and speed. We also discovered that a new commercial Cas12a effector could also drive our PAM-free CRISPR/Cas12a-assisted RPA assay and reduce its cost, though simultaneously lowering its signal. Our study and the new insights can be broadly applied to steer and facilitate further advances in CRISPR/Cas-based assays.

Programmable RNA detection with CRISPR-Cas12a

CRISPR is a prominent bioengineering tool and the type V CRISPR-associated protein complex, Cas12a, is widely used in diagnostic platforms due to its innate ability to cleave DNA substrates. Here we demonstrate that Cas12a can also be programmed to directly detect RNA substrates without the need for reverse transcription or strand displacement. We discovered that while the PAM-proximal "seed" region of the crRNA exclusively recognizes DNA for initiating trans-cleavage, the PAM-distal region or 3'-end of the crRNA can tolerate both RNA and DNA substrates. Utilizing this property, we developed a method named Split Activators for Highly Accessible RNA Analysis or 'SAHARA' to detect RNA sequences at the PAM-distal region of the crRNA by merely supplying a short ssDNA or a PAM containing dsDNA to the seed region. Notably, SAHARA is Mg2+ concentration- and pH-dependent, and it was observed to work robustly at room temperature with multiple orthologs of Cas12a. SAHARA also displayed a significant improvement in the specificity for target recognition as compared to the wild-type CRISPR-Cas12a, at certain positions along the crRNA. By employing SAHARA we achieved amplification-free detection of picomolar concentrations of miRNA-155 and hepatitis C virus RNA. Finally, SAHARA can use a PAM-proximal DNA as a switch to control the trans-cleavage activity of Cas12a for the detection of both DNA and RNA targets. With this, multicomplex arrays can be made to detect distinct DNA and RNA targets with pooled crRNA/Cas12a complexes. In conclusion, SAHARA is a simple, yet powerful nucleic acid detection platform based on Cas12a that can be applied in a multiplexed fashion and potentially be expanded to other CRISPR-Cas enzymes.

Towards Point of Care CRISPR-Based Diagnostics: From Method to Device

Rapid, accurate, and portable on-site detection is critical in the face of public health emergencies. Infectious disease control and public health emergency policymaking can both be aided by effective and trustworthy point of care tests (POCT). A very promising POCT method appears to be the clustered regularly interspaced short palindromic repeats and associated protein (CRISPR/Cas)-based molecular diagnosis. For on-site detection, CRISPR/Cas-based detection can be combined with multiple signal sensing methods and integrated into smart devices. In this review, sensing methods for CRISPR/Cas-based diagnostics are introduced and the advanced strategies and recent advances in CRISPR/Cas-based POCT are reviewed. Finally, the future perspectives of CRISPR and POCT are summarized and prospected.

Rapid isothermal point-of-care test for screening of SARS-CoV-2 (COVID-19)

Rapid on-site diagnosis of emerging pathogens is key for early identification of infected individuals and for prevention of further spreading in a population. Currently available molecular diagnostic tests are instrument-based whereas rapid antibody and antigen tests are often not sufficiently sensitive for detection in pre-symptomatic subjects. There is a need for rapid point of care molecular screening tests that can be easily adapted to emerging pathogens and are selective, sensitive, reliable in different settings around the world. We have developed a simple, rapid (<30 ​min), and inexpensive test for SARS-CoV-2 that is based on combination of isothermal reverse transcription recombinase polymerase amplification (RT-RPA) using modified primers and visual detection with paper-based microfluidics. Our test (CoRapID) is specific for SARS-CoV-2 (alpha to omicron variants) and does not detect other coronaviruses and pathogens by in silico and in vitro analysis. A two-step test protocol was developed with stable lyophilized reagents that reduces handling by using portable and disposable components (droppers, microapplicators/swabs, paper-strips). After optimization of assay components and conditions, we have achieved a limit of detection (LoD) of 1 copy/reaction by adding a blocking primer to the lateral flow assay. Using a set of 138 clinical samples, a sensitivity of 88.1% (P ​< ​0.05, CI: 78.2-93.8%) and specificity of 93.9% (P ​< ​0.05, CI: 85.4-97.6%) was determined. The lack of need for instrumentation for our CoRapID makes it an ideal on-site primary screening tool for local hospitals, doctors' offices, senior homes, workplaces, and in remote settings around the world that often do not have access to clinical laboratories.

Programmable RNA detection with CRISPR-Cas12a

CRISPR is a prominent bioengineering tool and the type V CRISPR-associated protein complex, Cas12a, is widely used in diagnostic platforms due to its innate ability to cleave DNA substrates. Here we demonstrate that Cas12a can also be programmed to directly detect RNA substrates without the need for reverse transcription or strand displacement. We discovered that while the PAM-proximal "seed" region of the crRNA exclusively recognizes DNA for initiating trans- cleavage, the PAM-distal region or 3'-end of the crRNA can tolerate both RNA and DNA substrates. Utilizing this property, we developed a method named Split Activators for Highly Accessible RNA Analysis or 'SAHARA' to detect RNA sequences at the PAM-distal region of the crRNA by merely supplying a short ssDNA or a PAM containing dsDNA to the seed region. Notably, SAHARA is Mg 2+ concentration- and pH-dependent, and it was observed to work robustly at room temperature with multiple orthologs of Cas12a. SAHARA also displayed a significant improvement in the specificity for target recognition as compared to the wild-type CRISPR-Cas12a, at certain positions along the crRNA. By employing SAHARA we achieved amplification-free detection of picomolar concentrations of miRNA-155 and hepatitis C virus RNA. Finally, SAHARA can use a PAM-proximal DNA as a switch to control the trans-cleavage activity of Cas12a for the detection of both DNA and RNA targets. With this, multicomplex arrays can be made to detect distinct DNA and RNA targets with pooled crRNA/Cas12a complexes. In conclusion, SAHARA is a simple, yet powerful nucleic acid detection platform based on Cas12a that can be applied in a multiplexed fashion and potentially be expanded to other CRISPR-Cas enzymes.

Abstract Figure

Thermophilic helicase-dependent amplification-based CRISPR/Cas12a system: Detection of stx2 in Escherichia coli O157:H7 by controlling primer dimers

BACKGROUND

s: To overcome the limitation of polymerase chain reaction (PCR), isothermal amplification methods such as thermophilic helicase-dependent amplification (tHDA) have been developed. However, formation of primer dimer due to the single amplification temperature are major problems of tHDA. When cross-dimerization of forward and reverse primer occurred, false-positive results can be found on the lateral flow assay (LFA) which is one of the major detection methods widely used as a point of care diagnosis. Therefore, specific method of detecting only the target amplicon is required.

RESULTS

In this study, a tHDA-based CRISPR/Cas12a system was developed to detect low levels of Escherichia coli O157:H7 in fresh salad mix without the false-positive results produced by primer dimers. For the comparison of the effect in eliminating false-positive results by CRISPR/Cas12a system, LFA was also evaluated. The tHDA-based CRISPR/Cas12a system detected as low as 10¹ CFU/mL E. coli O157:H7 in bacterial pure culture. In LFA false-positive results were produced due to the primer dimer, whereas the primer dimer produced by tHDA was not detected in the CRISPR/Cas12a system. These results indicated that the CRISPR/Cas12a system eliminated the formation of primer dimer. In fresh salad mix, the tHDA-based CRISPR/Cas12a system combined with the filter concentration method detected 10³ CFU/g E. coli O157:H7.

CONCLUSION

This study was the first to amplify stx2 of E. coli O157:H7 with tHDA as an isothermal amplification method and detected the amplicon without false-positive results by combining tHDA with CRISPR/Cas12a. Therefore, this study showed great potential for detecting low levels of E. coli O157:H7 present in fresh salad mix.

CRISPR/Cas13a Trans-Cleavage-Triggered Catalytic Hairpin Assembly Assay for Specific and Ultrasensitive SARS-CoV-2 RNA Detection

New coronavirus (SARS-CoV-2), which has caused the coronavirus disease 2019 (COVID-19) pandemic, has brought about a huge burden on global healthcare systems. Rapid and early detection is important to prevent the spread of the pandemic. Here, an assay based on CRISPR/Cas13a and catalytic hairpin assembly (CHA), termed as Cas-CHA, was developed for ultrasensitive and specific detection of SARS-CoV-2 RNA. Upon specific recognition of the target, the CRISPR/Cas13a collaterally cleaved a well-designed hairpin reporter and triggered the CHA reaction. Under optimized conditions, the assay detected the SARS-CoV-2 RNA with a wide range of 100 aM to 100 nM and realized a low detection limit of 84 aM. At the same time, the whole detecting process could be completed within 35 min. More importantly, the assay was able to distinguish SARS-CoV-2 RNA from common human coronaviruses and analyze in saliva samples. By the flexible design of crRNA, the assay was expanded to detect other viruses. The clinical sample analysis verified that the proposed assay held a great potential for practical testing.

Structural insights into the AFB1 aptamer coupled with a rationally designed CRISPR/Cas12a-Exo III aptasensor for AFB1 detection

Aflatoxin B₁ (AFB₁) is a typical food contaminant. A truncated DNA aptamer of AFB₁ was reported by our team in previous work. However, the recognition mechanism between aptamer and AFB₁ was lacking, which was crucial for the design of related aptasensor. Herein, the binding of aptamer to AFB₁ was systematically studied and found that it was an exothermic process and the conformation of aptamer changed during the recognition process. Loop bases in the secondary structure of aptamer formed a special binding pocket to recognize AFB₁. Van der Waals and electrostatic interaction were the main driving forces. By blocking the stem bases guided by the structural investigation, a rationally designed CRISPR/Cas12a-Exo III aptasensor for AFB₁ detection was constructed, and the sensitivity was improved by target recycling. Under optimal conditions, the linear detection range for AFB₁ was 0.01-20 ng/mL, and AFB₁ was accurately determined in corn and wheat samples. This work laid a theoretical foundation for the design of AFB₁ aptasensor, and the developed detection model came up with new ideas for the development of CRISPR/Cas12a-based aptasensor.

DNA-functionalized gold nanoparticles: Modification, characterization, and biomedical applications

With the development of technologies based on gold nanoparticles (AuNPs), bare AuNPs cannot meet the increasing requirements of biomedical applications. Modifications with different functional ligands are usually needed. DNA is not only the main genetic material, but also a good biological material, which has excellent biocompatibility, facile design, and accurate identification. DNA is a perfect ligand candidate for AuNPs, which can make up for the shortcoming of bare AuNPs. DNA-modified AuNPs (DNA-AuNPs) have exciting features and bright prospects in many fields, which have been intensively investigated in the past decade. In this review, we summarize the various approaches for the immobilization of DNA strands on the surface of AuNPs. Representative studies for biomedical applications based on DNA-AuNPs are also discussed. Finally, we present the challenges and future directions.

CRISPR-Cas based molecular diagnostics for foodborne pathogens

Foodborne pathogenic infection has brought multifaceted issues to human life, leading to an urgent demand for advanced detection technologies. CRISPR/Cas-based biosensors have the potential to address various challenges that exist in conventional assays such as insensitivity, long turnaround time and complex pretreatments. In this perspective, we review the relevant strategies of CRISPR/Cas-assisted diagnostics on foodborne pathogens, focusing on biosensing platforms for foodborne pathogens based on fluorescence, colorimetric, (electro)chemiluminescence, electrochemical, and surface-enhanced Raman scattering detection. It summarizes their detection principles by the clarification of foodborne pathogenic bacteria, fungi, and viruses. Finally, we discuss the current challenges or technical barriers of these methods against broad application, and put forward alternative solutions to improve CRISPR/Cas potential for food safety.

A functional RNA/DNA circuit for one-pot detection of SARS-CoV-2 RNA

A simple method is proposed in this work for the detection of SARS-CoV-2 RNA based on a functional RNA/DNA circuit. By ingeniously integrating the nucleic acid circuit technology and CRISPR/cas12a system, this method can achieve femtomolar detection of the target RNA in one step and successfully distinguish COVID-19 positive cases from clinical samples, proving its great potential for clinical application.

CRISPR/Cas13a-assisted AMP generation for SARS-CoV-2 RNA detection using a personal glucose meter

Herein, we described a washing- and label-free clustered regularly interspaced short palindromic repeats (CRISPR)/LwaCas13a-based RNA detection method utilizing a personal glucose meter (PGM), which relies on the trans-cleavage activity of CRISPR/Cas13a and kinase reactions. In principle, the presence of target RNA activates the trans-cleavage of CRISPR/Cas13a, generating 2',3'-cyclic phosphate adenosine, which is converted to adenosine monophosphate (AMP) by the T4 polynucleotide kinase. Subsequently, the AMP is converted to adenosine diphosphate (ADP) through phosphorylation by a myokinase; ADP is then used as a substrate in the cascade enzymatic reaction promoted by pyruvate kinase and hexokinase. The overall reaction leads to the continuous conversion of glucose to glucose-6-phosphate, resulting in a reduction of glucose concentration proportional to the level of target RNA, which can therefore be indirectly measured with a PGM. By employing this novel strategy, severe acute respiratory syndrome coronavirus-2 RNA can be successfully detected with excellent specificity. In addition, we were able to overcome non-specific responses of CRISPR/Cas13a and distinguish single nucleotide polymorphisms by introducing a single-base mismatch in the complementary RNA. Our study provides an alternative coronavirus disease 2019 detection technology that is affordable, accessible, and portable with a fast turnaround time and excellent selectivity.

Analyte-triggered in situ “off–on” of Tyndall effect for smartphone-based quantitative nanosensing of Ag+ ions

This work describes two new colorimetric methods for smartphone-based point-of-care nanosensing of toxic Ag⁺ ions. They were based on the analyte-triggered in situ "off-on" of Tyndall effect (TE) of non-plasmonic colloid or plasmonic metal nanoprobes. The first TE-inspired assay (TEA) focused on the initial analytical application of precipitation reactions where a non-plasmonic AgCl colloid could be formed once mixing the analyte with a NaCl solution. Such AgCl colloid displayed strong visual TE signals after their irradiation by a laser pointer pen, which unexpectedly achieved a detection limit of ~ 400 nM. The second TEA was further designed to reduce the limit down to ~ 78 nM using the analyte's oxidizability towards 3,3',5,5'-tetramethylbenzidine molecules. The redox reaction could create positively charged products that could make negatively charged plasmonic gold nanoparticles aggregate through electrostatic interactions to remarkably amplify their TE responses. Both limits were lower than the minimum allowable Ag⁺ level (~ 460 nM) in drinking water issued by the World Health Organization. The satisfactory recovery results for detecting Ag⁺ ions in river, pond, tap, and drinking water additionally demonstrated good selectivity, accuracy and practicality of the proposed methods for potential point-of-need uses in environmental analysis, public health, water safety, etc.

The Future of Point-of-Care Nucleic Acid Amplification Diagnostics after COVID-19: Time to Walk the Walk

Since the onset of the COVID-19 pandemic, over 610 million cases have been diagnosed and it has caused over 6.5 million deaths worldwide. The crisis has forced the scientific community to develop tools for disease control and management at a pace never seen before. The control of the pandemic heavily relies in the use of fast and accurate diagnostics, that allow testing at a large scale. The gold standard diagnosis of viral infections is the RT-qPCR. Although it provides consistent and reliable results, it is hampered by its limited throughput and technical requirements. Here, we discuss the main approaches to rapid and point-of-care diagnostics based on RT-qPCR and isothermal amplification diagnostics. We describe the main COVID-19 molecular diagnostic tests approved for self-testing at home or for point-of-care testing and compare the available options. We define the influence of specimen selection and processing, the clinical validation, result readout improvement strategies, the combination with CRISPR-based detection and the diagnostic challenge posed by SARS-CoV-2 variants for different isothermal amplification techniques, with a particular focus on LAMP and recombinase polymerase amplification (RPA). Finally, we try to shed light on the effect the improvement in molecular diagnostics during the COVID-19 pandemic could have in the future of other infectious diseases.

Multiplexed lateral flow assay integrated with orthogonal CRISPR-Cas system for SARS-CoV-2 detection

The development of field-deployable detection platform amenable for multiplexed genes testing will significantly improve the efficiency and reliability during point-of-care testing (POCT) applications. In this regard, an orthogonal CRISPR-Cas-mediated multiplexed lateral flow assay (designated as OC-MLFA) is proposed for SARS-CoV-2 genome detection. Taking the advantage of activation and cleavage preferences between Cas12a and Cas13a, orthogonal (two-independent-channel signal readout) CRISPR-Cas system is investigated. Lateral flow strips with two target lines are designed to accommodate the orthogonal CRISPR system. The interference between Cas12a and Cas13a channels can be effectively eliminated via the elaborate nucleic acids and lateral flow strips design. The high preamplification efficiency from reverse transcription recombinase polymerase amplification (RT-RPA) and Cas enzyme mediated trans-cleavage process bring the sensitivity of our OC-MLFA method to 10 copies per test (30 μL). Nasopharyngeal swab clinical samples with different cycle threshold (Ct) values according to the RT-PCR method were analyzed with the proposed OC-MLFA, during which 76 out of 76 detection accuracy was obtained. Featured with the multiplexed genes detection simultaneously in one reaction and colorimetric readout through single strip, the OC-MLFA we proposed herein ensures great accuracy and efficiency, which endows promising field-deployable POCT application feasibility.

A precise review on NAATs-based diagnostic assays for COVID-19: A motion in fast POC molecular tests

BACKGROUND

Diagnosis is one of the main strategies to deal with infectious and deadly diseases such as coronavirus disease 2019 (COVID-19). The global pandemic of COVID-19 has led to an immediate need to expand rapid diagnostic techniques. New isothermal-based methods are being developed for COVID-19 detection aiming to resolve the limitations related to the reverse transcription-quantitative polymerase chain reaction (RT-qPCR) method through immediate samples processing and minimizing false-negative or ambiguous results. Advances in nucleic acid amplification techniques (NAATs) can provide affordable and easy-to-use diagnostic platforms with high sensitivity and specificity in order to be available to the public as approved commercial kits.

AIMS

The development of point-of-care (POC) testing can assist in rapid clinical decision-making and mitigate burdens on health care facilities. Finally, we discussed the different diagnostic methods based on NAATs for COVID-19 in detail. Comparative parameters are addressed for all assays and Emergency Use Authorizations (EUA)-approved commercial tests are cited.

CONCLUSIONS

Isothermal-coupled methods and LAMP-based molecular methods have been suggested as suitable portable tests with high diagnostic speed for use in POC testing.

Toward a Home Test for COVID-19 Diagnosis: DNA Machine for Amplification-Free SARS-CoV-2 Detection in Clinical Samples

Nucleic acid-based detection of RNA viruses requires an annealing procedure to obtain RNA/probe or RNA/primer complexes for unwinding stable structures of folded viral RNA. In this study, we designed a protein-enzyme-free nano-construction, named four-armed DNA machine (4DNM), that requires neither an amplification stage nor a high-temperature annealing step for SARS-CoV-2 detection. It uses a binary deoxyribozyme (BiDz) sensor incorporated in a DNA nanostructure equipped with a total of four RNA-binding arms. Additional arms were found to improve the limit of detection at least 10-fold. The sensor distinguished SARS-CoV-2 from other respiratory viruses and correctly identified five positive and six negative clinical samples verified by quantitative polymerase chain reaction (RT-qPCR). The strategy reported here can be used for the detection of long natural RNA and can become a basis for a point-of-care or home diagnostic test.

Application of the CRISPR/Cas System in Pathogen Detection: A Review

Early and rapid diagnosis of pathogens is important for the prevention and control of epidemic disease. The polymerase chain reaction (PCR) technique requires expensive instrument control, a special test site, complex solution treatment steps and professional operation, which can limit its application in practice. The pathogen detection method based on the clustered regularly interspaced short palindromic repeats (CRISPRs) and CRISPR-associated protein (CRISPR/Cas) system is characterized by strong specificity, high sensitivity and convenience for detection, which is more suitable for practical applications. This article first reviews the CRISPR/Cas system, and then introduces the application of the two types of systems represented by Type II (cas9), Type V (cas12a, cas12b, cas14a) and Type VI (cas13a) in pathogen detection. Finally, challenges and prospects are proposed.

Point-of-care CRISPR/Cas biosensing technology: A promising tool for preventing the possible COVID-19 resurgence caused by contaminated cold-chain food and packaging

The ongoing coronavirus disease 2019 (COVID-19) pandemic caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has caused great public health concern and has been a global threat due to its high transmissibility and morbidity. Although the SARS-CoV-2 transmission mainly relies on the person-to-person route through the respiratory droplets, the possible transmission through the contaminated cold-chain food and packaging to humans has raised widespread concerns. This review discussed the possibility of SARS-CoV-2 transmission via the contaminated cold-chain food and packaging by tracing the occurrence, the survival of SARS-CoV-2 in the contaminated cold-chain food and packaging, as well as the transmission and outbreaks related to the contaminated cold-chain food and packaging. Rapid, accurate, and reliable diagnostics of SARS-CoV-2 is of great importance for preventing and controlling the COVID-19 resurgence. Therefore, we summarized the recent advances on the emerging clustered regularly interspaced short palindromic repeats (CRISPR)/Cas system-based biosensing technology that is promising and powerful for preventing the possible COVID-19 resurgence caused by the contaminated cold-chain food and packaging during the COVID-19 pandemic, including CRISPR/Cas system-based biosensors and their integration with portable devices (e.g., smartphone, lateral flow assays, microfluidic chips, and nanopores). Impressively, this review not only provided an insight on the possibility of SARS-CoV-2 transmission through the food supply chain, but also proposed the future opportunities and challenges on the development of CRISPR/Cas system-based detection methods for the diagnosis of SARS-CoV-2.

CRISPR/Cas Systems-Inspired Nano/Biosensors for Detecting Infectious Viruses and Pathogenic Bacteria

Infectious pathogens cause severe human illnesses and great deaths per year worldwide. Rapid, sensitive, and accurate detection of pathogens is of great importance for preventing infectious diseases caused by pathogens and optimizing medical healthcare systems. Inspired by a microbial defense system (i.e., CRISPR/ CRISPR-associated proteins (Cas) system, an adaptive immune system for protecting microorganisms from being attacked by invading species), a great many new biosensors have been successfully developed and widely applied in the detection of infectious viruses and pathogenic bacteria. Moreover, advanced nanotechnologies have also been integrated into these biosensors to improve their detection stability, sensitivity, and accuracy. In this review, the recent advance in CRISPR/Cas systems-based nano/biosensors and their applications in the detection of infectious viruses and pathogenic bacteria are comprehensively reviewed. First of all, the categories and working principles of CRISPR/Cas systems for establishing the nano/biosensors are simply introduced. Then, the design and construction of CRISPR/Cas systems-based nano/biosensors are comprehensively discussed. In the end, attentions are focused on the applications of CRISPR/Cas systems-based nano/biosensors in the detection of infectious viruses and pathogenic bacteria. Impressively, the remaining opportunities and challenges for the further design and development of CRISPR/Cas system-based nano/biosensors and their promising applications are proposed.

Development of a multi-recombinase polymerase amplification assay for rapid identification of COVID-19, influenza A and B

The coronavirus disease 2019 (COVID-19) pandemic caused extensive loss of life worldwide. Further, the COVID-19 and influenza mix-infection had caused great distress to the diagnosis of the disease. To control illness progression and limit viral spread within the population, a real-time reverse-transcription PCR (RT-PCR) assay for early diagnosis of COVID-19 was developed, but detection was time-consuming (4-6 h). To improve the diagnosis of COVID-19 and influenza, we herein developed a recombinase polymerase amplification (RPA) method for simple and rapid amplification of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2), the causative agent of COVID-19 and Influenza A (H1N1, H3N2) and B (influenza B). Genes encoding the matrix protein (M) for H1N1, and the hemagglutinin (HA) for H3N2, and the polymerase A (PA) for Influenza B, and the nucleocapsid protein (N), the RNA-dependent-RNA polymerase (RdRP) in the open reading frame 1ab (ORF1ab) region, and the envelope protein (E) for SARS-CoV-2 were selected, and specific primers were designed. We validated our method using SARS-CoV-2, H1N1, H3N2 and influenza B plasmid standards and RNA samples extracted from COVID-19 and Influenza A/B (RT-PCR-verified) positive patients. The method could detect SARS-CoV-2 plasmid standard DNA quantitatively between 10² and 10⁵ copies/ml with a log linearity of 0.99 in 22 min. And this method also be very effective in simultaneous detection of H1N1, H3N2 and influenza B. Clinical validation of 100 cases revealed a sensitivity of 100% for differentiating COVID-19 patients from healthy controls when the specificity was set at 90%. These results demonstrate that this nucleic acid testing method is advantageous compared with traditional PCR and other isothermal nucleic acid amplification methods in terms of time and portability. This method could potentially be used for detection of SARS-CoV-2, H1N1, H3N2 and influenza B, and adapted for point-of-care (POC) detection of a broad range of infectious pathogens in resource-limited settings.

A Salmonella Microfluidic Chip Combining Non-Contact Eddy Heater and 3D Fan-Shaped Mixer with Recombinase Aided Amplification

Foodborne pathogenic bacteria have become a worldwide threat to human health, and rapid and sensitive bacterial detection methods are urgently needed. In this study, a facile microfluidic chip was developed and combined with recombinase-aided amplification (RAA) for rapid and sensitive detection of Salmonella typhimurium using a non-contact eddy heater for dynamic lysis of bacterial cells and a 3D-printed fan-shaped active mixer for continuous-flow mixing. First, the bacterial sample was injected into the chip to flow through the spiral channel coiling around an iron rod under an alternating electromagnetic field, resulting in the dynamic lysis of bacterial cells by this non-contact eddy heater to release their nucleic acids. After cooling to ~75 °C, these nucleic acids were continuous-flow mixed with magnetic silica beads using the fan-shaped mixer and captured in the separation chamber using a magnet. Finally, the captured nucleic acids were eluted by the eluent from the beads to flow into the detection chamber, followed by RAA detection of nucleic acids to determine the bacterial amount. Under the optimal conditions, this microfluidic chip was able to quantitatively detect Salmonella typhimurium from 1.1 × 10² to 1.1 × 10⁵ CFU/mL in 40 min with a detection limit of 89 CFU/mL and might be prospective to offer a simple, low-cost, fast and specific bacterial detection technique for ensuring food safety.

In Silico Evaluation of CRISPR-Based Assays for Effective Detection of SARS-CoV-2

Coronavirus disease (COVID-19) caused by the SARS-CoV-2 has been an outbreak since late 2019 up to now. This pandemic causes rapid development in molecular detection technologies to diagnose viral infection for epidemic prevention. In addition to antigen test kit (ATK) and polymerase chain reaction (PCR), CRISPR-based assays for detection of SARS-CoV-2 have gained attention because it has a simple setup but still maintain high specificity and sensitivity. However, the SARS-CoV-2 has been continuing mutating over the past few years. Thus, molecular tools that rely on matching at the nucleotide level need to be reevaluated to preserve their specificity and sensitivity. Here, we analyzed how mutations in different variants of concern (VOC), including Alpha, Beta, Gamma, Delta, and Omicron strains, could introduce mismatches to the previously reported primers and crRNAs used in the CRISPR-Cas system. Over 40% of the primer sets and 15% of the crRNAs contain mismatches. Hence, primers and crRNAs in nucleic acid-based assays must be chosen carefully to pair up with SARS-CoV-2 variants. In conclusion, the data obtained from this study could be useful in selecting the conserved primers and crRNAs for effective detections against the VOC of SARS-CoV-2.

A CRISPR-Cas12a integrated SERS nanoplatform with chimeric DNA/RNA hairpin guide for ultrasensitive nucleic acid detection

Background: CRISPR-Cas12a has been integrated with nanomaterial-based optical techniques, such as surface-enhanced Raman scattering (SERS), to formulate a powerful amplification-free nucleic acid detection system. However, nanomaterials impose steric hindrance to limit the accessibility of CRISPR-Cas12a to the narrow gaps (SERS hot spots) among nanoparticles (NPs) for producing a significant change in signals after nucleic acid detection. Methods: To overcome this restriction, we specifically design chimeric DNA/RNA hairpins (displacers) that can be destabilized by activated CRISPR-Cas12a in the presence of target DNA, liberating excessive RNA that can disintegrate a core-satellite nanocluster via toehold-mediated strand displacement for orchestrating a promising "on-off" nucleic acid biosensor. The core-satellite nanocluster comprises a large gold nanoparticle (AuNP) core surrounded by small AuNPs with Raman tags via DNA hybridization as an ultrabright Raman reporter, and its disassembly leads to a drastic decrease of SERS intensity as signal readouts. We further introduce a magnetic core to the large AuNPs that can facilitate their separation from the disassembled nanostructures to suppress the background for improving detection sensitivity. Results: As a proof-of-concept study, our findings showed that the application of displacers was more effective in decreasing the SERS intensity of the system and attained a better limit of detection (LOD, 10 aM) than that by directly using activated CRISPR-Cas12a, with high selectivity and stability for nucleic acid detection. Introducing magnetic-responsive functionality to our system further improves the LOD to 1 aM. Conclusion: Our work not only offers a platform to sensitively and selectively probe nucleic acids without pre-amplification but also provides new insights into the design of the CRISPR-Cas12a/SERS integrated system to resolve the steric hindrance of nanomaterials for constructing biosensors.

Recent advances in airborne pathogen detection using optical and electrochemical biosensors

The world is currently facing an adverse condition due to the pandemic of airborne pathogen SARS-CoV-2. Prevention is better than cure; thus, the rapid detection of airborne pathogens is necessary because it can reduce outbreaks and save many lives. Considering the immense role of diverse detection techniques for airborne pathogens, proper summarization of these techniques would be beneficial for humans. Hence, this review explores and summarizes emerging techniques, such as optical and electrochemical biosensors used for detecting airborne bacteria (Bacillus anthracis, Mycobacterium tuberculosis, Staphylococcus aureus, and Streptococcus pneumoniae) and viruses (Influenza A, Avian influenza, Norovirus, and SARS-CoV-2). Significantly, the first section briefly focuses on various diagnostic modalities applied toward airborne pathogen detection. Next, the fabricated optical biosensors using various transducer materials involved in colorimetric and fluorescence strategies for infectious pathogen detection are extensively discussed. The third section is well documented based on electrochemical biosensors for airborne pathogen detection by differential pulse voltammetry, cyclic voltammetry, square-wave voltammetry, amperometry, and impedance spectroscopy. The unique pros and cons of these modalities and their future perspectives are addressed in the fourth and fifth sections. Overall, this review inspected 171 research articles published in the last decade and persuaded the importance of optical and electrochemical biosensors for airborne pathogen detection.

CRISPR-empowered hybridization chain reaction amplification for an attomolar electrochemical sensor

Rapid pathogen screening holds the key against certain viral infections, especially in an overwhelming pandemic. Herein, a CRISPR-empowered electrochemical biosensor was designed for the ultrasensitive detection of the avian influenza A (H7N9) virus gene sequence. Combining the CRISPR/Cas system, a signal-amplification strategy and a high-conductivity sensing substrate, the developed biosensor showed an ultrawide dynamic range, an ultralow detection limit, and excellent selectivity for H7N9 detection, providing a potential sensing platform for the simple, fast, sensitive, and on-site detection of infectious diseases.

Development of colorimetric sensors based on gold nanoparticles for SARS-CoV-2 RdRp, E and S genes detection

We present a fast, reliable and easy to scale-up colorimetric sensor based on gold nanoparticles (AuNPs) to detect the sequences coding for the RdRp, E, and S proteins of SARS-CoV-2. The optimization of the system (so-called “the sensor”) includes the evaluation of different sizes of nanoparticles, sequences of oligonucleotides and buffers. It is stable for months without any noticeable decrease in its activity, allowing the detection of SARS-CoV-2 sequences by the naked eye in 15 min. The efficiency and selectivity of detection, in terms of significative colorimetric changes in the solution upon target recognition, are qualitatively (visually) and quantitatively (absorbance measurements) assessed using synthetic samples and samples derived from infected cells and patients. Furthermore, an easy and affordable amplification approach is implemented to increase the system's sensitivity for detecting high and medium viral loads (≥10³ - 10⁴ viral RNA copies/μl) in patient samples. The whole process (amplification and detection) takes 2.5 h. Due to the ease of use, stability and minimum equipment requirements, the proposed approach can be a valuable tool for the detection of SARS-CoV-2 at facilities with limited resources.

CASCADE: Naked eye-detection of SARS-CoV-2 using Cas13a and gold nanoparticles

The COVID-19 pandemic has brought to light the need for fast and sensitive detection methods to prevent the spread of pathogens. The scientific community is making a great effort to design new molecular detection methods suitable for fast point-of-care applications. In this regard, a variety of approaches have been developed or optimized, including isothermal amplification of viral nucleic acids, CRISPR-mediated target recognition, and read-out systems based on nanomaterials.

Herein, we present CASCADE (CRISPR/CAS-based Colorimetric nucleic Acid DEtection), a sensing system for fast and specific naked-eye detection of SARS-CoV-2 RNA. In this approach, viral RNA is recognized by the LwaCas13a CRISPR protein, which activates its collateral RNase activity. Upon target recognition, Cas13a cleaves ssRNA oligonucleotides conjugated to gold nanoparticles (AuNPs), thus inducing their colloidal aggregation, which can be easily visualized. After an exhaustive optimization of functionalized AuNPs, CASCADE can detect picomolar concentrations of SARS-CoV-2 RNA. This sensitivity is further increased to low femtomolar (3 fM) and even attomolar (40 aM) ranges when CASCADE is coupled to RPA or NASBA isothermal nucleic acid amplification, respectively. We finally demonstrate that CASCADE succeeds in detecting SARS-CoV-2 in clinical samples from nasopharyngeal swabs.

In conclusion, CASCADE is a fast and versatile RNA biosensor that can be coupled to different isothermal nucleic acid amplification methods for naked-eye diagnosis of infectious diseases.

Highly Sensitive Detection Method for HV69-70del in SARS-CoV-2 Alpha and Omicron Variants Based on CRISPR/Cas13a

As SARS-CoV-2 variants continue to evolve, identifying variants with adaptive diagnostic tool is critical to containing the ongoing COVID-19 pandemic. Herein, we establish a highly sensitive and portable on-site detection method for the HV69-70del which exist in SARS-CoV-2 Alpha and Omicron variants using a PCR-based CRISPR/Cas13a detection system (PCR-CRISPR). The specific crRNA (CRISPR RNA) targeting the HV69-70del is screened using the fluorescence-based CRISPR assay, and the sensitivity and specificity of this method are evaluated using diluted nucleic acids of SARS-CoV-2 variants and other pathogens. The results show that the PCR-CRISPR detection method can detect 1 copies/μL SARS-CoV-2 HV69-70del mutant RNA and identify 0.1% of mutant RNA in mixed samples, which is more sensitive than the RT-qPCR based commercial SARS-CoV-2 variants detection kits and sanger sequencing. And it has no cross reactivity with ten other pathogens nucleic acids. Additionally, by combined with our previously developed ERASE (Easy-Readout and Sensitive Enhanced) lateral flow strip suitable for CRISPR detection, we provide a novel diagnosis tool to identify SARS-CoV-2 variants in primary and resource-limited medical institutions without professional and expensive fluorescent detector.

Characterization of Cme and Yme thermostable Cas12a orthologs

CRISPR-Cas12a proteins are RNA-guided endonucleases that cleave invading DNA containing target sequences adjacent to protospacer adjacent motifs (PAM). Cas12a orthologs have been repurposed for genome editing in non-native organisms by reprogramming them with guide RNAs to target specific sites in genomic DNA. After single-turnover dsDNA target cleavage, multiple-turnover, non-specific single-stranded DNA cleavage in trans is activated. This property has been utilized to develop in vitro assays to detect the presence of specific DNA target sequences. Most applications of Cas12a use one of three well-studied enzymes. Here, we characterize the in vitro activity of two previously unknown Cas12a orthologs. These enzymes are active at higher temperatures than widely used orthologs and have subtle differences in PAM preference, on-target cleavage, and trans nuclease activity. Together, our results enable refinement of Cas12a-based in vitro assays especially when elevated temperature is desirable.

CRISPR-Cas12a-Based Aptasensor for On-Site and Highly Sensitive Detection of Microcystin-LR in Freshwater

On-site monitoring of trace organic pollutants with facile methods is critical to environmental pollutant prevention and control. Herein, we proposed a CRISPR-Cas12a-based aptasensor platform (named as MC-LR-Casor) for on-site and sensitive detection of microcystin-LR (MC-LR). After hybridization with blocker DNA, the MC-LR aptamers were conjugated to magnetic beads (MBs) to get the MB aptasensor. In the presence of MC-LR, their interactions with aptamers were triggered and the specific binding caused the release of blocker DNA. Using the programmability of the CRISPR-Cas system, the released blocker DNA was designed to activate a Cas12a-crRNA complex. Single strand DNA reporters were rapidly cleaved by the complex. Signal readout could be achieved by fluorometer or lateral flow strips, which were positively correlated to MC-LR concentration. Benefiting from the CRISPR-Cas12a amplification system, the proposed sensing platform exhibited high sensitivity and reached the limit of detection of ∼3 × 10^-6 μg/L (fluorescence method) or 1 × 10^-3 μg/L (lateral flow assay). In addition, the MC-LR-Casor showed excellent selectivity and good recovery rates, demonstrating their good applicability for real water sample analysis. During the whole assay, only two steps of incubation at a constant temperature were required and the results could be visualized when employing flow strips. Therefore, the proposed assay offered a simple and convenient alternative for in situ MC-LR monitoring, which may hold great promise for future environmental surveillance.

Gold Tablets: Gold Nanoparticles Encapsulated into Dextran Tablets and Their pH-Responsive Behavior as an Easy-to-Use Platform for Multipurpose Applications

Many applications using gold nanoparticles (AuNPs) require (i) their functionalization with a biopolymer to increase their stability and (ii) their transformation into an easy-to-handle material, which provide them with specific properties. In this research, a portable tablet platform is presented based on dextran-encapsulated gold nanoparticles (AuNPs-dTab) by a ligand exchange reaction between citrate-capped gold nanoparticles (AuNPs-Cit) and dextran. These newly fabricated tablets were characterized utilizing ultraviolet-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR), transmission electron microscopy (TEM), dynamic light scattering (DLS), X-ray diffraction spectroscopy (XRD), differential scanning calorimetry (DSC), and atomic force microscopy (AFM) techniques. The results showed that dextran-capped gold nanoparticles in a tablet platform (AuNPs-dTab) were well-dispersed and highly stable for at least a year at room temperature. In addition to particle and surface characterization of AuNPs-dTab, the tablet morphology in terms of thickness, diameter, density, and opacity was also measured using 6 and 10% dextran with 2, 4 and 8 nM AuNPs-Cit. We further investigated the pH-responsive behavior of AuNPs-dTab in the presence and absence of sodium chloride. Results showed that neutral and alkaline environments were suitable to render AuNPs dispersed in a tablet, while an acidic condition controls the aggregation rate of AuNPs as confirmed by concentration-dependent aggregation phenomena. Besides the easy fabrication, these tablets were portable and low-cost (approx. 1.22 CAD per 100 tablets of a 100 μL solution of dextran-capped gold nanoparticles (AuNPs-dSol)). The biocompatible nature of dextran along with the acidic medium trigger nature of AuNPs makes our proposed tablet a potential candidate for cancer therapy due to the acidic surrounding of tumor tissues as compared to normal cells. Also, our proposed tablet approach paves the way for the fabrication of portable and easy-to-use optical sensors based on the AuNPs embedded in a natural polymeric architecture that would serve as a colorimetric recognition indicator for detecting analytes of interest.