Ambient Ionization Mass Spectrometry Today and Tomorrow: Embracing Challenges and Opportunities

Rapid Analysis of Trace Phthalates by Spray-Inlet Microwave Plasma Torch Ionization-Tandem Mass Spectrometry in Commercial Perfumes

BACKGROUND

The less volatile fraction of perfumes can be easily contaminated by phthalates esters (PAEs) which are endocrine-disrupting chemicals during the production, bottling and transportation processes. It is necessary to establish an innovative and rapid method to determine the trace PAEs in commercial perfumes.

OBJECTIVE

Hence, self-built spray-inlet microwave plasma torch ionization coupled with a quadrupole time-of-flight tandem mass spectrometer (QTOF-MS) was developed for direct analysis of PAEs in perfumes with no sample pretreatment.

METHODS

Perfumes were sprayed to the MPT's flame directly by sampling pump in 10 µL/min and the ions produced by MPT were introduced into QTOF-MS, the MPT worked at 2450 MHz and 40 W in the 800 ml/min flow rate of argon.

RESULTS

For the developed method, excellent linearities were obtained and the correlation coefficient of Di-n-pentyl Phthalate was 0.9799 and the rest were larger than 0.99. The LODs and LOQs were obtained in the ranges of 1.452-18.96 ng/g and 4.839-63.19 ng/g, respectively. The spiked recoveries of PAEs were in the range of 100.1-105.2% with satisfied intra-day RSDs and inter-day RSDs ranging from 1.51-4.34% and 3.45-5.65%, respectively. PAEs in commercial perfumes were successfully detected by spray-inlet MPT-MS2 with low concentrations from 0.036-1.352 µg/g.

CONCLUSIONS

The method is a promising tool in field analysis of PAEs in cosmetic solutions where rapid qualitative and quantitative analysis in needed.

HIGHLIGHTS

The method was satisfactorily applied to the analysis of commercial perfume samples within 30 s, and earned merits such as simplicity, sensitivity, environmental friendliness and ease operation.

Lipid Profiling in Cancer Diagnosis with Hand-Held Ambient Mass Spectrometry Probes: Addressing the Late-Stage Performance Concerns

Untargeted lipid fingerprinting with hand-held ambient mass spectrometry (MS) probes without chromatographic separation has shown promise in the rapid characterization of cancers. As human cancers present significant molecular heterogeneities, careful molecular modeling and data validation strategies are required to minimize late-stage performance variations of these models across a large population. This review utilizes parallels from the pitfalls of conventional protein biomarkers in reaching bedside utility and provides recommendations for robust modeling as well as validation strategies that could enable the next logical steps in large scale assessment of the utility of ambient MS profiling for cancer diagnosis. Six recommendations are provided that range from careful initial determination of clinical added value to moving beyond just statistical associations to validate lipid involvements in disease processes mechanistically. Further guidelines for careful selection of suitable samples to capture expected and unexpected intragroup variance are provided and discussed in the context of demographic heterogeneities in the lipidome, further influenced by lifestyle factors, diet, and potential intersect with cancer lipid pathways probed in ambient mass spectrometry profiling studies.

Assessing direct analysis in real-time mass spectrometry for the identification and serotyping of Legionella pneumophila

AIMS

The efficacy of ambient mass spectrometry to identify and serotype Legionella pneumophila was assessed. To this aim, isolated waterborne colonies were submitted to a rapid extraction method and analysed by direct analysis in real-time mass spectrometry (DART-HRMS).

METHODS AND RESULTS

The DART-HRMS profiles, coupled with partial least squares discriminant analysis (PLS-DA), were first evaluated for their ability to differentiate Legionella spp. from other bacteria. The resultant classification model achieved an accuracy of 98.1% on validation. Capitalising on these encouraging results, DART-HRMS profiling was explored as an alternative approach for the identification of L. pneumophila sg. 1, L. pneumophila sg. 2-15 and L. non-pneumophila; therefore, a different PLS-DA classifier was built. When tested on a validation set, this second classifier reached an overall accuracy of 95.93%. It identified the harmful L. pneumophila sg. 1 with an impressive specificity (100%) and slightly lower sensitivity (91.7%), and similar performances were reached in the classification of L. pneumophila sg. 2-15 and L. non-pneumophila.

CONCLUSIONS

The results of this study show the DART-HMRS method has good accuracy, and it is an effective method for Legionella serogroup profiling.

SIGNIFICANCE AND IMPACT OF THE STUDY

These preliminary findings could open a new avenue for the rapid identification and quick epidemiologic tracing of L. pneumophila, with a consequent improvement to risk assessment.

Rapid fingerprint analysis for herbal polysaccharides using direct analysis in real-time ionization mass spectrometry

RATIONALE

Herbal polysaccharides have various potential medicinal values. Development of reliable analytical method for the fingerprint analysis of polysaccharides is critical for their quality assessment, origin identification, and authenticity evaluation.

METHODS

Mechanochemical extraction (MCE) was used to extract polysaccharide components from different herbal species. Intact polysaccharides were then directly analyzed by direct analysis in real-time mass spectrometry (DART-MS). Standard addition method with isotope-labeled internal standard was used to quantify polysaccharide amounts directly from liquid extract. Multivariate data analysis was further conducted for species classification.

RESULTS

The intact and large polysaccharides were decomposed into small fragment ions less than m/z 350 instantaneously using DART ion source. Different polysaccharides showed distinguished fingerprint DART-MS spectra using both individual and mixed herbal species. The liquid supernatant from MCE was validated to be used as direct sample for DART-MS analysis. Quantitation was successfully achieved for polysaccharide contents in Dendrobium officinale from different locations.

CONCLUSIONS

A rapid fingerprint protocol in combination of MCE and DART-MS for herbal polysaccharides was developed. The whole process could be accomplished within a few minutes, from raw materials to final spectra, without requirements of pre-digestion and additional sample purification.

Solid-phase microextraction- probe electrospray ionization devices for screening and quantitating drugs of abuse in small amounts of biofluids

Probe electrospray ionization (PESI) is an ambient ionization mass spectrometry technique (AIMS) that is primarily used in qualitative studies, though researchers have recently combined it with sample preparation for the quantitative analysis of various analytes in biological matrices. This study presents a method that integrates solid-phase microextraction with PESI for direct coupling to a triple quadrupole mass spectrometer, and examines its ability to quantitate drugs of abuse. Intra- and inter-probe reproducibility experiments were conducted to assess the stability and reproducibility of the extraction-phase-coated PESI probes (coating length: 2 mm; coating thickness: 6.5 μm). This research is the first documented instance wherein highly sensitive determinations were successfully attained using these microextraction and micro-desorption techniques in conjunction with small volumes of sample and extraction phase. A mixture consisting of IPA/H₂O (1/1 v/v) + 0.1% FA was determined to be the optimal desorption solvent for SPME-PESI-MS/MS, as it facilitated high analyte enrichment in a picolitre of the solvent, which acted at the same time as efficient electrospray media. Furthermore, a method of quantifying drugs of abuse in 30 μL of plasma without matrix modification was also developed. This method had an intra-day accuracy within the 80-120% range for all eight drugs of abuse at concentrations of 3, 30, and 90 pg μL^-1; the exception to this result was lorazepam at 30 pg μL^-1, which had an intra-day accuracy of 122%. The lower limit of quantification (LLOQ) for fentanyl and nordiazepam was pg μL^-1; the LLOQ for buprenorphine, codeine, diazepam, lorazepam, and propranolol was 5 pg μL^-1; and the LLOQ of oxazepam was 10 pg μL^-1.

Rapid ex vivo molecular fingerprinting of biofluids using laser-assisted rapid evaporative ionization mass spectrometry

Of the many metabolites involved in any clinical condition, only a narrow range of biomarkers is currently being used in the clinical setting. A key to personalized medicine would be to extend this range. Metabolic fingerprinting provides a more comprehensive insight, but many methods used for metabolomics analysis are too complex and time-consuming to be diagnostically useful. Here, a rapid evaporative ionization mass spectrometry (REIMS) system for direct ex vivo real-time analysis of biofluids with minor sample pretreatment is detailed. The REIMS can be linked to various laser wavelength systems (such as optical parametric oscillator or CO₂ laser) and with automation for high-throughput analysis. Laser-induced sample evaporation occurs within seconds through radiative heating with the plume guided to the MS instrument. The presented procedure includes (i) laser setup with automation, (ii) analysis of biofluids (blood/urine/stool/saliva/sputum/breast milk) and (iii) data analysis. We provide the optimal settings for biofluid analysis and quality control, enabling sensitive, precise and robust analysis. Using the automated setup, 96 samples can be analyzed in ~35-40 min per ionization mode, with no intervention required. Metabolic fingerprints are made up of 2,000-4,000 features, for which relative quantification can be achieved at high repeatability when total ion current normalization is applied. With saliva and feces as example matrices, >70% of features had a coefficient of variance ≤30%. However, to achieve acceptable long-term reproducibility, additional normalizations by, e.g., LOESS are recommended, especially for positive ionization.

Clinical Chemistry for Developing Countries: Mass Spectrometry

Early disease diagnosis is necessary to enable timely interventions. Implementation of this vital task in the developing world is challenging owing to limited resources. Diagnostic approaches developed for resource-limited settings have often involved colorimetric tests (based on immunoassays) due to their low cost. Unfortunately, the performance/sensitivity of such simplistic tests are often limited and significantly hinder opportunities for early disease detection. A new criterion for selecting diagnostic tests in low- and middle-income countries is proposed here that is based on performance-to-cost ratio. For example, modern mass spectrometry (MS) now involves analysis of the native sample in the open laboratory environment, enabling applications in many fields, including clinical research, forensic science, environmental analysis, and agriculture. In this critical review, we summarize recent developments in chemistry that enable MS to be applied effectively in developing countries. In particular, we argue that closed automated analytical systems may not offer the analytical flexibility needed in resource-limited settings. Alternative strategies proposed here have potential to be widely accepted in low- and middle-income countries through the utilization of the open-source ambient MS platform that enables microsampling techniques such as dried blood spot to be coupled with miniature mass spectrometers in a centralized analytical platform. Consequently, costs associated with sample handling and maintenance can be reduced by >50% of the total ownership cost, permitting analytical measurements to be operated at high performance-to-cost ratios in the developing world.

Direct Liquid Extraction and Ionization Techniques for Understanding Multimolecular Environments in Biological Systems (Secondary Publication)

A combination of direct liquid extraction using a small volume of solvent and electrospray ionization allows the rapid measurement of complex chemical components in biological samples and visualization of their distribution in tissue sections. This review describes the development of such techniques and their application to biological research since the first reports in the early 2000s. An overview of electrospray ionization, ion suppression in samples, and the acceleration of specific chemical reactions in charged droplets is also presented. Potential future applications for visualizing multimolecular environments in biological systems are discussed.

Ionization of glycans from alkali metal salt-impregnated paper

Ambient ionization of glycans is simply and efficiently achieved by spraying from an alkali metal salt-impregnated paper surface. Monosaccharides, oligosaccharides and ring glycans easily form abundant alkali metal adduct ions, and give simple and clean high-quality mass spectra. The enhancement is specific for glycans, compared to a wide variety of non-glycan compounds present in a matrix. In addition, molecular weight of unknown glycans can be further identified based on the ion mass difference of various alkali metal adduct ions from a certain compound when using a mixed salt-impregnated paper containing five cation salts. Successful determination of glycans and glycoconjugates in plant extracts, honey, blood and urine demonstrates the practicability of this approach to complicated matrices, especially biological matrices.

Minimizing transient microenvironment-associated variability for analysis of environmental anthropogenic contaminants via ambient ionization

The rapid and quantitative analysis of anthropogenic contaminants in environmental matrices is crucial for regulatory testing and to elucidate the environmental fate of these pollutants. Direct ambient mass spectrometry (AMS) methodologies greatly increase sample throughput, can be adapted for onsite analysis and are often regarded as semi-quantitative by most developed protocols. One of the limitations of AMS, especially for on site analysis applications, is the irreproducibility of the measurements related to the occurrence of transient microenvironments (TME) and variable background interferences. In this work we report an effective strategy to minimize these effects by hyphenating, for the first time, solid phase microextraction (SPME) arrow to mass spectrometry via a thermal desorption unit (TDU) and direct analysis in real time (DART) source. The developed method was optimized for the extraction and analysis of pesticides and pharmaceuticals from surface water. It was demonstrated that the hyphenation of the SPME and TDU-DART resulted in reduced background contamination, indicating the suitability of the method for onsite analysis even in variable and non-ideal environments. Model analytes were quantitated in the low μg/L range with a total analysis time of less than 5 min, linear dynamic ranges (LDR) and interday reproducibility for most compounds being 2.5-500 μg/L and lower than 10%, respectively. The developed approach provides an excellent analytical tool that can be applied for the onsite high-throughput analysis of water samples as well as air and aereosols. Considering the tunability of our extraction process, time-resolved environmental monitoring can be achieved onsite within minutes.

Rapid, in situ detection of chemical warfare agent simulants and hydrolysis products in bulk soils by low-cost 3D-printed cone spray ionization mass spectrometry

Chemical warfare agents (CWAs) are toxic chemicals that have been used as disabling or lethal weapons in war, terrorist attacks, and assasinations. The Chemical Weapons Convention (CWC) has prohibited the use, development, production, and stockpiling of CWAs since its initiation in 1997, however, the threat of deployment still looms. Detection of trace CWAs post-deployment or post-remediation, in bulk matrices such as soil, often requires lengthy sample preparation steps or extensive chromatographic separation times. 3D-printed cone spray ionization (3D-PCSI), an ambient ionization mass spectrometric (MS) technique, provides a rapid, simple, and low-cost method for trace CWA analysis in soil matrices for both in-laboratory and in-field detection. Described here is the utilization of conductive 3D-printed cones to perform both rapid sampling and ionization for CWA simulants and hydrolysis products in eight solid matrices. The analysis of trace quantities of CWA simulants and hydrolysis products by 3D-PCSI-MS coupled to both a commercial benchtop system and a field-portable MS system is detailed. Empirical limits of detection (LOD) for CWA simulants on the benchtop MS ranged from 100 ppt to 750 ppb and were highly dependant on solid matrix composition, with the portable system yielding similar spectral data from alike matrices, albeit with lower sensitivity.

Critical evaluation of ambient mass spectrometry coupled with chemometrics for the early detection of adulteration scenarios in Origanum vulgare L

Nowadays, most of the screening methods in food manufacturing are based on spectroscopic techniques. Ambient Mass Spectrometry is a relatively new field of analytical chemistry which has proven to offer similar speed and ease-of-use when compared to other fingerprinting techniques, alongside the advantages of good selectivity, sensitivity and chemical information. Numerous applications have been explored in food authenticity, based either on the target detection of adulteration markers or, less frequently, on the development of multivariate classification models. The aim of the present work was to evaluate and compare the capabilities of Direct Analysis in Real Time (DART) and Atmospheric Solid Analysis Probe (ASAP) Mass Spectrometry (MS) for the high-throughput authenticity screening of commercial herbs and spices products. The gross addition of bulking material to dried Mediterranean oregano was taken as case study. First, a pilot sample set, constituted by authentic dried oregano, olive leaves (a frequently reported adulterant) and mixtures thereof at different levels (i.e. 10, 20, 30 and 50% w/w) was used. Each sample was fingerprinted by both ambient-MS techniques. After appropriate pre-processing, the whole mass spectra were used for the subsequent multivariate data analysis. Soft Independent Modelling of Class Analogy was adopted as classification algorithm and the model was challenged with both new authentic oregano and in-house prepared blends. To the best of our knowledge, this is the first report of DART-MS and ASAP-MS used in full scan mode and coupled to chemometric modelling as rapid fingerprinting approach for food authentication. Although both the techniques provided satisfactory results, ASAP-MS clearly showed greater potential, leading to reproducible, diagnostic feature-rich mass spectra. For this reason, ASAP-MS was further tested under a more convoluted scenario, where the training and validation sets were enlarged with additional authentic oregano samples and a wider range of adulterant species, respectively. Overall good results were achieved, with 93% model predictive accuracy, and screening detection capability estimated between 5-20% (w/w) addition, depending on the adulterant considered with the only exception of majorana. Investigation of Q residuals could highlight the statistically-relevant chemical markers which could be tentatively annotated by coupling the ASAP probe with a high resolution mass analyser. The results from the validation study confirmed the great potential of ASAP-MS in combination with chemometrics as fast MS-based screening solution and demonstrated its feasibility for classification model building.

In vivo solid-phase microextraction swab-mass spectrometry for multidimensional analysis of human saliva

Solid phase microextraction (SPME) is one of the most powerful sample preparation techniques for analyte extraction and enrichment from complex matrices. SPME fibers are commonly used to extract analytes from collected samples. Following our recent work on development of in vivo SPME swab that integrates an SPME fiber and a medical swab (Anal Chim Acta, 2020, 1124, 71-77), the multiple SPME fibers inserted into a medical swab (multiple-SPME swab) is further developed to couple with different mass spectrometry (MS) approaches for multidimensional analysis of human saliva in this work. The new features of cotton ball and SPME fiber of multiple-SPME swab are investigated. Biomarker discovery and disease diagnosis using multiple-SPME swab are also demonstrated. The present study shows that direct coupling multiple-SPME swab with different MS-based approaches could be simple and versatile in vivo method to expand the classes of analytes extracted simultaneously from human saliva.

Applications of direct analysis in real time mass spectrometry in food analysis: A review

RATIONALE

Direct analysis in real time (DART) combined with mass spectrometry (MS) detection has become one of the most broadly used analytical approaches for the direct molecular characterization of food samples with regard to their chemical quality, safety, origin, and authentication. The major advantages of DART-MS for food analysis include high chemical sensitivity and specificity, high speed and throughput of analysis, simplicity, and the obviation of tedious sample preparation and solvents.

METHODS

The recent applications of DART coupled with different mass analyzers, including quadrupole, ion trap, Orbitrap, and time of flight, are discussed. In addition, sample pretreatment methods that have been coupled with DART-MS are discussed.

RESULTS

We summarize the applications of DART-MS in food science and industry published in the period from 2005 to this date. The applications and analytical characteristics are systematically categorized across the three major types of foods: solid foods, liquid foods, and viscous foods.

CONCLUSIONS

DART-MS has proved its high suitability for the direct, rapid, and high-throughput molecular analysis of very different food samples with minimal or no sample preparation, thus offering a high-speed alternative to liquid chromatography/mass spectrometry (LC/MS) and gas chromatography/mass spectrometry (GC/MS) approaches that are traditionally employed in food analysis.

Remodeling nanoDESI Platform with Ion Mobility Spectrometry to Expand Protein Coverage in Cancerous Tissue

Nanospray desorption electrospray ionization mass spectrometry is an ambient ionization technique that is capable of mapping proteins in tissue sections. However, high-abundant molecules or isobaric interference in biological samples hampers its broad applications in probing low-abundant proteins. To address this challenge, herein we demonstrated an integrated module that coupled pneumatic-assisted nanospray desorption electrospray ionization mass spectrometry with high-field asymmetric ion mobility spectrometry. Using this module to analyze mouse brain sections, the protein coverage was significantly increased. This improvement allowed the mapping of low-abundant proteins in tissue sections with a 5 μm spatial resolution enabled by computationally assisted fusion with optical microscopic images. Moreover, the module was successfully applied to characterize melanoma in skin tissues based on the enhanced protein profiles. The results suggested that this integrating module will be potentially applied to discover novel proteins in cancers.

High-Spatial-Resolution Multimodal Imaging by Tapping-Mode Scanning Probe Electrospray Ionization with Feedback Control

Direct extraction and ionization techniques using minute amounts of solvent can be employed for the rapid analysis of chemical components in a sample without any sample preparation steps. This type of approach is important for mass spectrometry imaging of samples with multiple chemical components that have different spatial distributions (i.e., biological tissues). To improve the spatial resolution of such imaging, it is necessary to reduce the solvent volume for extraction and deliver it to the sample surface. This report describes a feedback control system applied to tapping-mode scanning probe electrospray ionization. By combining the measurement technique of capillary probe vibration with the dynamic distance control system between the probe and the sample, the vibration amplitude of the probe is maintained while the probe scans over uneven samples. This method allows simultaneous high-resolution imaging of molecular distribution, surface topography, and amplitude/phase changes in the probe vibration. Such multimodal imaging is demonstrated on rhodamine B thin films in microwells and on a mouse brain tissue section. This technique can generally be applied to examine the multidimensional molecular distribution and the surface profiles of various objects.

Advances in drugs of abuse testing

Drugs of abuse testing is widely used clinically and forensically. Urine is the preferred type of specimen for drugs of abuse screening, but saliva, sweat, hair, and meconium are emerging types of specimens. GC-MS has been used as a gold standard for confirmatory drug testing, but LC-tandem-MS can analyze more diverse types of analytes than GC-MS. Thus, LC-tandem-MS becomes a new gold standard for confirmatory drug testing. Unlike GC-MS, LC-tandem-MS is not suited for non-targeted comprehensive drug screening. But with the advent of high-resolution-MS such as Tof-MS, which can discriminate the compounds of similar molecular masses but with different formulas, LC-hybrid-Tof-MS is usable for non-targeted comprehensive drug screening. Another technical advancement is the advent of miniature ambient ionization MS, which can analyze biological specimens including urine within one minute. Thus these mass spectrometers are promising for rapid drugs of abuse testing in a POC setting.

Rapid Quantification of Gut Microbial Short-Chain Fatty Acids by pDART-MS

Short-chain fatty acids (SCFAs) are small molecules ubiquitous in nature. In mammalian guts, SCFAs are mostly produced by anaerobic intestinal microbiota through the fermentation of dietary fiber. Levels of microbe-derived SCFAs are closely relevant to human health status and indicative to gut microbiota dysbiosis. However, the quantification of SCFA using conventional chromatographic approaches is often time consuming, thus limiting high-throughput screening tests. Herein, we established a novel method to quantify SCFAs by coupling amidation derivatization of SCFAs with paper-loaded direct analysis in real time mass spectrometry (pDART-MS). Remarkably, SCFAs of a biological sample were quantitatively determined within a minute using the pDART-MS platform, which showed a limit of detection at the μM level. This platform was applied to quantify SCFAs in various biological samples, including feces from stressed rats, sera of patients with kidney disease, and fermentation products of metabolically engineered cyanobacteria. Significant differences in SCFA levels between different groups of biological practices were promptly revealed and evaluated. As there is a burgeoning demand for the analysis of SCFAs due to an increasing academic interest of gut microbiota and its metabolism, this newly developed platform will be of great potential in biological and clinical sciences as well as in industrial quality control.

Electrospray ionization rapid screening sans liquid chromatography column: A sensitive method for detection and quantification of chemicals in animal tissues and urine

RATIONALE

Electrospray ionization mass spectrometry (ESI-MS) in conjunction with liquid chromatography (LC) can provide accurate quantitative data, but it is not well-suited for the rapid screening (RS) of analytes incurred into complex matrices. This study was designed to determine the usefulness of ESI for rapid detection and quantitation of veterinary drugs from complex biological matrices under near real-time conditions.

METHODS

Nine veterinary drugs or metabolites, clenbuterol, erythromycin, flunixin, 5-hydroxyflunixin, meloxicam, ractopamine, salbutamol, tylosin and zilpaterol, present in cow urine, sheep urine, sheep tissues (kidney, muscle, liver and lung) or pig kidney, were simultaneously analyzed. A simple sample clean-up procedure, which included dilution with 10% sodium carbonate followed by extraction with ethyl acetate, was used. For tissues, an additional pre-extraction with hexane was performed to remove fat prior to MS analysis. Samples were introduced into the mass spectrometer through the LC autosampler, but no chromatographic separation was employed. A Sciex 5600+ triple time-of-flight mass spectrometer with a dual-spray source interfaced with a Shimadzu Nexera LC system was used. Samples were analyzed in positive ion mode.

RESULTS

Sample extraction times were typically 10-30 min or less and instrumental analysis time was 1 min/sample. Regression coefficients of matrix-matched standard curves across all compounds ranged from 0.9701-0.9999 in urine (cow and sheep) and tissues (sheep kidney, liver, lung, muscle and pig kidney). Limits of detection ranged from 0.11 to 2.03 ng/mL across analytes in urine and 0.11 to 8.86 ng/g across tissues. Correlations between RS-ESI-MS and LC/MS/MS results were 0.956 to 0.998 for incurred residues of flunixin in cow urine, ractopamine in pig kidney and zilpaterol in sheep urine.

CONCLUSIONS

RS-ESI-MS provided rapid, sensitive, and accurate analyses of nine veterinary drugs from complex matrices with very little sample preparation and produced quantitative data akin to LC/MS/MS.

Mass Spectrometry Analysis of Intact Proteins from Crude Samples

Analysis of intact proteins by native mass spectrometry has emerged as a powerful tool for obtaining insight into subunit diversity, post-translational modifications, stoichiometry, structural arrangement, stability, and overall architecture. Typically, such an analysis is performed following protein purification procedures, which are time consuming, costly, and labor intensive. As this technology continues to move forward, advances in sample handling and instrumentation have enabled the investigation of intact proteins in situ and in crude samples, offering rapid analysis and improved conservation of the biological context. This emerging field, which involves various ion source platforms such as matrix-assisted laser desorption ionization (MALDI) and electrospray ionization (ESI) for both spatial imaging and solution-based analysis, is expected to impact many scientific fields, including biotechnology, pharmaceuticals, and clinical sciences. In this Perspective, we discuss the information that can be retrieved by such experiments as well as the current advantages and technical challenges associated with the different sampling strategies. Furthermore, we present future directions of these MS-based methods, including current limitations and efforts that should be made to make these approaches more accessible. Considering the vast progress we have witnessed in recent years, we anticipate that the advent of further innovations enabling minimal handling of MS samples will make this field more robust, user friendly, and widespread.

In vivo solid-phase microextraction swab sampling of environmental pollutants and drugs in human body for nano-electrospray ionization mass spectrometry analysis

In vivo sampling and sensitive detection of environmental pollutants and drugs in human body play a crucial role in understanding human health. In this study, in vivo solid-phase microextraction (SPME) swab was fabricated using a SPME fiber and a medical cotton swab for noninvasive sampling and extraction of environmental pollutants and drugs in human oral cavity, nasal cavity and on skin surface. After sampling, SPME was coupled with nano-electrospray ionization mass spectrometry (nanoESI-MS) for desorption, ionization, and detection of the extracted analytes. As a result, limit of detection (LOD) and limit of quantification (LOQ) of nicotine in oral fluid were found to be 1.0 pg/mL (S/N ≥ 3) and 4.0 pg/mL (S/N ≥ 10), respectively. Linear dynamic signal responses of nicotine exhibited excellent linearity (R² = 0.9996) in human oral fluid ranging from 0.1 to 50 ng/mL. The coefficient of variation (CV) values of SPME swab for five measurements from sample vials and human body were 5.1-6.7% and 22.7-32.6%, respectively. Rapid analysis of a single sample could be completed within 10 min. Overall, our results demonstrated that SPME swab-MS is a promising noninvasive method for enhanced detection of analytes in human body.

Rapid LA-REIMS and comprehensive UHPLC-HRMS for metabolic phenotyping of feces

Ambient ionization-based techniques hold great potential for rapid point-of-care applicable metabolic fingerprinting of tissue and fluids. Hereby, feces represents a unique biospecimen as it integrates the complex interactions between the diet, gut microbiome and host, and is therefore ideally suited to study the involvement of the diet-gut microbiome axis in metabolic diseases and their treatments at a molecular level. We present a new method for rapid (<10 s) metabolic fingerprinting of feces, i.e. laser-assisted rapid evaporative ionization mass spectrometry (LA-REIMS) with an Nd:YAG laser (2940 nm) and quadrupole Time-of-Flight mass spectrometer as main components. The LA-REIMS method was implemented on mimicked crude feces samples from individuals that were assigned a state of type 2 diabetes or euglycaemia. Based on the generated fingerprints, enclosing 4923 feature ions, significant segregation according to disease classification was achieved through orthogonal partial least squares discriminant analysis (Q²(Y) of 0.734 and p-value of 1.93e^-17) and endorsed by a general classification accuracy of 90.5%. A comparison between the discriminative performance of the novel LA-REIMS and our established ultra-high performance liquid-chromatography high-resolution MS (UHPLC-HRMS) metabolomics and lipidomics methodologies for fingerprinting of stool was performed. Based on the supervised modelling results upon UHPLC-HRMS (Q²(Y) ≥ 0.655 and p-value ≤ 4.11 e^-5), equivalent or better discriminative performance of LA-REIMS fingerprinting was concluded. Eventually, comprehensive UHPLC-HRMS was employed to assess metabolic alterations as observed for the defined classes, whereby metformin treatment of the type 2 diabetes patients was considered a relevant study factor to acquire new mechanistic insights. More specifically, ten metabolization products of metformin were identified, with (hydroxylated) triazepinone and metformin-cholesterol reported for the first time in vivo.In conclusion, LA-REIMS was established as an expedient strategy for rapid metabolic fingerprinting of feces, whereby potential implementations may relate, but are not limited to differential diagnosis and treatment efficacy evaluation of metabolic diseases. Yet, LC-HRMS remains essential for in-depth biological interpretation.

Covalent organic frameworks-based paper solid phase microextraction combined with paper spray mass spectrometry for highly enhanced analysis of tetrabromobisphenol A

COFs-based paper solid phase microextraction-paper spray mass spectrometry was developed for tetrabromobisphenol A detection with enhanced analysis performance.