Recent Advances in the Catalytic Oxidation of Volatile Organic Compounds: A Review Based on Pollutant Sorts and Sources

Direct mitigation of secondary organic aerosol particulate pollutants by multiphase photocatalysis

Particulate matter represents one of the most severe air pollutants globally. Organic aerosol (OA) comprises 30-70 % of submicron particle mass in urban areas. An effective way to mitigate OA particulate pollutants is to reduce the formation of secondary organic aerosol (SOA). Here, we studied the effect of titanium dioxide (TiO2) photocatalytic seeds on the formation and mitigation of SOA particles from α-pinene or toluene oxidation in chamber. For the first time, we discovered that under ultraviolet (UV) irradiation, the presence of TiO2 directly removed internally mixed α-pinene SOA mass by 53.7 % within 200 mins, and also directly removed SOA matter in an externally mixed state that is not in direct contact with TiO2 surface: the mass of externally mixed α-pinene SOA was reduced by 21.9 % within 81 mins, and the toluene SOA mass was reduced by 46.6 % in 145mins. In addition, the presence of TiO2 effectively inhibited the formation of SOA particles with a SOA mass yield of zero. This study brings up an innovative concept for air pollution control - the direct photocatalytic degradation of OA with aid of TiO2-based photocatalysts. Our novel findings will potentially bring practical applications in air pollution abatement and regional, even global aerosol-climate interactions.

Mn-Based Mullites for Environmental and Energy Applications

Mn-based mullite oxides AMn2O5 (A = lanthanide, Y, Bi) is a novel type of ternary catalyst in terms of their electronic and geometric structures. The coexistence of pyramid Mn3+-O and octahedral Mn4+-O makes the d-orbital selectively active toward various catalytic reactions. The alternative edge- and corner-sharing stacking configuration constructs the confined active sites and abundant active oxygen species. As a result, they tend to show superior catalytic behaviors and thus gain great attention in environmental treatment and energy conversion and storage. In environmental applications, Mn-based mullites have been demonstrated to be highly active toward low-temperature oxidization of CO, NO, volatile organic compounds (VOCs), etc. Recent research further shows that mullites decompose O3 and ozonize VOCs from -20 °C to room temperature. Moreover, mullites enhance oxygen reduction reactions (ORR) and sulfur reduction reactions (SRR), critical kinetic steps in air-battery and Li-S batteries, respectively. Their distinctive structures also facilitate applications in gas-sensitive sensing, ionic conduction, high mobility dielectrics, oxygen storage, piezoelectricity, dehydration, H2O2 decomposition, and beyond. A comprehensive review from basic physicochemical properties to application certainly not only gains a full picture of mullite oxides but also provides new insights into designing heterogeneous catalysts.

High-Performance Ir1/CeO2 Single-Atom Catalyst for the Oxidation of Toluene

The elimination of toluene is an obligatory target with increasing VOC emission in recent years. This study successfully prepared a single-atom Ir catalyst (Ir1/CeO2) by a simple incipient wetness impregnation method, confirmed by in situ CO DRIFTS and AC-HAADF-STEM. Compared to the cluster Ir catalyst (Ir/CeO2-C), Ir1/CeO2 exhibited excellent catalytic performance, stability, and water resistance for the oxidation of toluene. By Raman, H2-TPR, O2-TPD, and XPS experiments, abundant oxygen defects and a unique Ir3+-Ov-Ce3+ structure were formed for the Ir1/CeO2 sample because it had a lower oxygen vacancy formation energy. Furthermore, the DFT results revealed that the Ir1/CeO2 sample had a lower ring-opening energy barrier and adsorption energy of the ring-opening products, which was the rate-determining step for the oxidation of toluene. This work provides instructive insights into the construction of Ir/CeO2 catalysts for the highly efficient removal of VOCs.

Tuning the crystallinity of the MnOx catalysts to promote toluene catalytic oxidation

In this paper, the MnOx catalysts with excellent toluene oxidation performance were prepared by a simple precipitation method. The physicochemical properties of the prepared MnOx catalysts were investigated by XRD, BET, H2-TPR, O2-TPD and XPS. The obtained results revealed that the crystallinity of the prepared MnOx catalysts could be effectively regulated by changing the (NH4)2CO3/Mn(NO3)2 molar ratio, and thus affecting the oxygen vacancy concentration of the prepared MnOx catalysts. The prepared MnOx-4 catalyst with the (NH4)2CO3/Mn(NO3)2 molar ratio of 4.0 had the poor crystallinity and small grain size, which effectively promoted the oxygen defects in the MnOx catalyst to be formed. At the same time, the MnOx-4 catalyst had a large specific surface area, the highest low temperature reducibility and the largest number of oxygen vacancies and surface adsorbed oxygen species, which allowed more surface oxygen species to participate in the redox reaction, and promoted the toluene deep oxidation. Therefore, when the (NH4)2CO3/Mn(NO3)2 molar ratio was 4.0, the prepared MnOx-4 catalyst exhibited an excellent toluene catalytic oxidation performance and robust catalytic stability. What's more, the toluene oxidation conversion on the MnOx-4 catalyst reached 99% at 230°C, and the MnOx-4 catalyst showed excellent resistance to water vapour.

A Holographic-Type Model in the Description of Polymer-Drug Delivery Processes

A unitary model of drug release dynamics is proposed, assuming that the polymer-drug system can be assimilated into a multifractal mathematical object. Then, we made a description of drug release dynamics that implies, via Scale Relativity Theory, the functionality of continuous and undifferentiable curves (fractal or multifractal curves), possibly leading to holographic-like behaviors. At such a conjuncture, the Schrödinger and Madelung multifractal scenarios become compatible: in the Schrödinger multifractal scenario, various modes of drug release can be "mimicked" (via period doubling, damped oscillations, modulated and "chaotic" regimes), while the Madelung multifractal scenario involves multifractal diffusion laws (Fickian and non-Fickian diffusions). In conclusion, we propose a unitary model for describing release dynamics in polymer-drug systems. In the model proposed, the polymer-drug dynamics can be described by employing the Scale Relativity Theory in the monofractal case or also in the multifractal one.

A theoretical study on toluene oxidization by OH radical

Toluene, a prominent member of volatile organic compounds (VOCs), exerts a substantial adverse influence on both human life and the environment. In the context of advanced oxidation processes, the ·OH radical emerges as a highly efficient oxidant, pivotal in the elimination of VOCs. This study employs computational quantum chemistry methods (G4MP2//B3LYP/6-311++G(d,p)) to systematically investigate the degradation of toluene by ·OH radicals in an implicit solvent model, and validates the rationale of choosing a single-reference method using T1 diagnostics. Our results suggest three possible reaction mechanisms for the oxidation of toluene by ·OH: firstly, the phenyl ring undergoes a hydrogen abstraction reaction followed by direct combination with ·OH to form cresol; secondly, ·OH directly adds to the phenyl ring, leading to ring opening; thirdly, oxidation of sidechain to benzoic acid followed by further addition and ring opening. The last two oxidation pathways involve the ring opening of toluene via the addition of ·OH, significantly facilitating the process. Therefore, both pathways are considered feasible for the degradation of toluene. Subsequently, the UV-H2O2 system was designed to induce the formation of ·OH for toluene degradation and to identify the optimal reaction conditions. It was demonstrated that ·OH and 1O2 are the primary active species for degrading toluene, with their contribution ranking as ·OH > 1O2. The intermediates in the mixture solution after reactions were characterized using GC-MS, demonstrating the validity of theoretical predictions. A comparative study of the toluene consumption rate revealed an experimental comprehensive activation energy of 10.33 kJ/mol, which is consistent with the preliminary activation energies obtained via theoretical analysis of these three mechanisms (0.56 kJ/mol to 13.66 kJ/mol), indicating that this theoretical method can provide a theoretical basis for experimental studies on the oxidation of toluene by ·OH.

Estimate of the C-Cl photoionization cross section and absolute photoionization cross sections of chlorinated organic compounds

Chlorinated organic compounds are prominently used for industrial production, but their vapors and emission byproducts can cause detrimental effects to human health and the environment. To accurately quantify organochlorine compounds, the absolute photoionization cross section of tetrachloroethylene, chlorobenzene, 1,2-dichlorobenzene, and chloroacetone are measured using multiplexed synchrotron photoionization mass spectrometry at the Advanced Light Source at Lawrence Berkeley National Laboratory. These measurements allow for the estimation of the C-Cl photoionization cross section, increasing quantification accuracy of chlorinated emissions for kinetic modeling and pollutant mitigation. CBS-QB3 calculations of adiabatic ionization energies and thermochemical appearance energies are also presented and agree well with the experimental results.

Catalytic Oxidation of Benzene over Atomic Active Site AgNi/BCN Catalysts at Room Temperature

Benzene is the typical volatile organic compound (VOC) of indoor and outdoor air pollution, which harms human health and the environment. Due to the stability of their aromatic structure, the catalytic oxidation of benzene rings in an environment without an external energy input is difficult. In this study, the efficient degradation of benzene at room temperature was achieved by constructing Ag and Ni bimetallic active site catalysts (AgNi/BCN) supported on boron-carbon-nitrogen aerogel. The atomic-scale Ag and Ni are uniformly dispersed on the catalyst surface and form Ag/Ni-C/N bonds with C and N, which were conducive to the catalytic oxidation of benzene at room temperature. Further catalytic reaction mechanisms indicate that benzene reacted with ·OH to produce R·, which reacted with O2 to regenerate ·OH. Under the strong oxidation of ·OH, benzene was oxidized to form alcohols, carboxylic acids, and eventually CO2 and H2O. This study not only significantly reduces the energy consumption of VOC catalytic oxidation, but also improves the safety of VOC treatment, providing new ideas for the low energy consumption and green development of VOC treatment.

Fenton-mediated thermocatalytic conversion of CO2 to acetic acid by industrial waste-derived magnetite nanoparticles

Iron oxide dust, discarded as industrial waste, has been used here to fabricate magnetic iron oxide nanoparticles (Fe3O4-NPs). We have proposed the thermo-catalytic reduction of carbon dioxide (CO2) using Fe3O4-NPs in the presence of H2O2 to get acetic acid (AcOH) at near ambient conditions (100 °C, 10 bar) with a maximum yield of ∼0.4 M in a batch-reactor. The importance of H2O2 can be described as it facilitates the production of higher concentrations of OH˙ and H+/˙, which consequently supports the synthesis of AcOH.

Enhanced ability of toluene oxidation by controlling inversion degree of spinel composed of only Co, Mn

Exploring the single relationship between the inversion degree of spinel and its catalytic performance is a great challenge, but has important significance for further structural design and application. A series of CoMn inverse spinels were prepared and the general formula [Formula: see text] was deduced through X-ray diffraction refinement to find a decreased inversion degree x as calcination temperature rose. Catalytic oxidation of toluene showed that higher inversion degree (S-300 with x ≈ 0.95) can reach larger conversion rate (90 % at about 250 °C for 400 ppm toluene) with greater reaction stability (140 h). Density Functional Theory (DFT) calculations on density of states indicated its metallic nature, and found that the strength of O-p and Transition metal-d orbitals at Fermi energy is positively correlated to the inversion degree, meaning stronger electron migration ability. Along with the adsorption calculation analysis that lattice oxygen species are proved to work dominantly (S-300 with lowest adsorption energy but highest performance), this work uncovered a theoretical insight into inverse spinel oxide, to provide the possibility of elevated oxidation ability through structural control.

Volatile organic compounds (VOCs) emissions from internal floating-roof tank in oil depots in Beijing: Influencing factors and emission reduction strategies analysis

The internal floating-roof tank is the main type of storage tank for refined oil products. The volatile organic compounds (VOCs) emission from the internal floating-roof tank plays a dominant role in the unorganized emission source of the oil depot. In this study, we selected six typical oil depots in Beijing to investigate VOC emission characteristics from the tank top vent hole using infrared imaging technology and flame ionization detector (FID). The results reveal that infrared thermal imager is efficient in quickly identifying the emission level of the tank discharge point. The ambient temperature and wind speed have a direct effect on sealing loss, the turnover can greatly influence the wall hanging loss, and the concentration of VOCs emitted from the tank top vent hole is negatively correlated with liquid height. Furthermore, the influence of accessories type of the internal floating-roof tank on the concentration of VOCs emission from the top vent hole is also studied when other parameters remain unchanged, and find the floating deck type and sealing mode have a significant influence on their VOCs emissions, of which the combination of pontoon type floating deck and secondary seal are effective in controlling the concentration of VOCs emitted from the tank top vent hole. Finally, based on our experimental results, several feasible emission reduction strategies are proposed in terms of source prevention and process control in order to achieve the fine management of the whole process. This paper provides important technical support and policy thoughts for VOCs emission control during oil storage.

Multi-Functional Formaldehyde-Nitrate Batteries for Wastewater Refining, Electricity Generation, and Production of Ammonia and Formate

As bulky pollutants in industrial and agricultural wastewater, nitrate and formaldehyde pose serious threats to the human health and ecosystem. Current purification technologies including chemical and bio-/photo-/electro-chemical methods, are generally high-cost, time-consuming, or energy-intensive. Here, we report a novel formaldehyde-nitrate battery by pairing anodic formaldehyde oxidation with cathodic nitrate reduction, which simultaneously enables wastewater purification, electricity generation, and the production of high-value-added ammonia and formate. As a result, the formaldehyde-nitrate battery remarkably exhibits an open-circuit voltage of 0.75 V, a peak power density of 3.38 mW cm-2 and the yield rates of 32.7 mg h-1  cm-2 for ammonia and 889.4 mg h-1  cm-2 for formate. In a large-scale formaldehyde-nitrate battery (25 cm2 ), 99.9 % of nitrate and 99.8 % of formaldehyde are removed from simulated industrial wastewater and the electricity of 2.03 W⋅h per day is generated. Moreover, the design of such a multi-functional battery is universally applicable to the coupling of NO3 - or NO2 - reduction with various aldehyde oxidization, paving a new avenue for wastewater purification and chemical manufacturing.

Thermocatalytic oxidation of a binary mixture of formaldehyde and toluene at ambient levels by a titanium dioxide supported platinum catalyst

The thermocatalytic oxidative potential of various supported noble metal catalysts (SNMCs) is well-known for hazardous volatile organic compounds (VOCs), e.g., formaldehyde (FA) and toluene. However, little is known about SNMC performance against ambient VOC pollution with low concentration (subppm levels) relative to industrial effuluents with high concentrations (several hundred ppm). Here, the thermocatalytic oxidation performance of a titanium dioxide (TiO2)-supported platinum catalyst (Pt/TiO2) has been evaluated for a low-concentration binary mixture of FA and toluene at low temperatures and in the dark. A sample of TiO2 containing 1 wt% Pt with thermal reduction pre-treatment under hydrogen achieved 100 % conversion of FA (500 ppb) and toluene (100 ppb) at 130 °C and a gas hourly velocity of 59,701 h-1. Its catalytic activity was lowered by either a decrease in catalyst mass or an increase in VOC concentration, relative humidity, or flow rate. In situ diffuse reflectance infrared Fourier transform spectroscopy, density functional theory simulations, and molecular oxygen (O2) temperature-programmed desorption experiments were used to identify possible VOC oxidation pathways, reaction mechanisms, and associated surface phenomena. The present work is expected to offer insights into the utility of metal oxide-supported Pt catalysts for the low-temperature oxidative removal of gaseous VOCs in the dark, primarily for indoor air quality management.

Modulating the Electronic States of Pt Nanoparticles on Reducible Metal-Organic Frameworks for Boosting the Oxidation of Volatile Organic Compounds

The adsorption and activation of pollutant molecules and oxygen play a critical role in the oxidation reaction of volatile organic compounds (VOCs). In this study, superior adsorption and activation ability was achieved by modulating the interaction between Pt nanoparticles (NPs) and UiO-66 (U6) through the spatial position effect. Pt@U6 exhibits excellent activity in toluene, acetone, propane, and aldehyde oxidation reactions. Spectroscopic studies, 16O2/18O2 kinetic isotopic experiments, and density functional theory (DFT) results jointly reveal that the encapsulated Pt NPs of Pt@U6 possess higher electron density and d-band center, which is conducive for the adsorption and dissociation of oxygen. The toluene oxidation reaction and DFT results indicate that Pt@U6 is more favorable to activate the C-H of toluene and the C═C of maleic anhydride, while Pt/U6 with lower electron density and d-band center exhibits a higher oxygen dissociation temperature and higher reactant activation energy barriers. This study provides a deep insight into the architecture-performance relation of Pt-based catalysts for the catalytic oxidation of VOCs.

Establishing efficient toluene elimination over cobalt-manganese bimetallic oxides via constructing strong Co-Mn interaction

Doping proves to be an efficacious method of establishing intermetallic interactions for enhancing toluene oxidation performance of bimetallic oxides. However, conventional bimetallic oxide catalysts are yet to overcome their inadequacy in establishing intermetallic interactions. In this work, the dispersion of Mn-Co bimetallic sites was improved by hydrolytic co-precipitation, strengthening the intermetallic interactions which improved the structural and physicochemical properties of the catalysts, thus significantly enhancing its catalytic behavior. MnCo-H catalysts fabricated by the hydrolytic co-precipitation method showed promising catalytic performance (T50 = 223 °C, T90 = 229 °C), robust stability (at least 100 h) and impressive water resistance (under 10 vol.% of water) for toluene elimination. Hydrolytic co-precipitation has been found to improve dispersion of MnCo elements and to enhance interaction between Co and Mn ions (Mn4+ + Co2+ = Mn3+ + Co3+), resulting in a lower reduction temperature (215 °C) and a weaker Mn-O bond strength, creating more lattice defects and oxygen vacancies, which are responsible for superior catalytic properties of MnCo-H samples. Furthermore, in situ DRIFTs showed that gaseous toluene molecules adsorbed on the surface of MnCo-H were continuously oxidized to benzyl alcohol → benzaldehyde → benzoate, followed by a ring-opening reaction with surface-activated oxygen to convert to maleic anhydride as the final intermediate, which further generates water and carbon dioxide. It was also revealed that the ring-opening reaction for the conversion of benzoic acid to maleic anhydride is the rate-controlling step. This study reveals that optimizing active sites and improving reactive oxygen species by altering the dispersion of bimetals to enhance bimetallic interactions is an effective strategy for the improvement of catalytic behavior, while the hydrolytic co-precipitation method fits well with this corollary.

Efficient Catalytic Elimination of Chlorobenzene Based on the Water Vapor-Promoting Effect within Mn-Based Catalysts: Activity Enhancement and Polychlorinated Byproduct Inhibition

Achieving no or low polychlorinated byproduct selectivity is essential for the chlorinated volatile organic compounds (CVOCs) degradation, and the positive roles of water vapor may contribute to this goal. Herein, the oxidation behaviors of chlorobenzene over typical Mn-based catalysts (MnO2 and acid-modified MnO2) under dry and humid conditions were fully explored. The results showed that the presence of water vapor significantly facilitates the deep mineralization of chlorobenzene and restrains the formation of Cl2 and dichlorobenzene. This remarkable water vapor-promoting effect was conferred by the MnO2 substrate, which could suitably synergize with the postconstructed acidic sites, leading to good activity, stability, and desirable product distribution of acid-modified MnO2 catalysts under humid conditions. A series of experiments including isotope-traced (D2O and H218O) CB-TPO provided complete insights into the direct involvement of water molecules in chlorobenzene oxidation reaction and attributed the root cause of the water vapor-promoting effect to the proton-rich environment and highly reactive water-source oxygen species rather than to the commonly assumed cleaning effect or hydrogen proton transfer processes (generation of active OOH). This work demonstrates the application potential of Mn-based catalysts in CVOCs elimination under practical application conditions (containing water vapor) and provides the guidance for the development of superior industrial catalysts.

Ultrathin LayCoOx Nanosheets with High Porosity Featuring Boosted Catalytic Oxidation of Benzene: Mechanism Elucidation via an Experiment-Theory Combined Paradigm

Designing transition-metal oxides for catalytically removing the highly toxic benzene holds significance in addressing indoor/outdoor environmental pollution issues. Herein, we successfully synthesized ultrathin LayCoOx nanosheets (thickness of ∼1.8 nm) with high porosity, using a straightforward coprecipitation method. Comprehensive characterization techniques were employed to analyze the synthesized LayCoOx catalysts, revealing their low crystallinity, high surface area, and abundant porosity. Catalytic benzene oxidation tests demonstrated that the La0.029CoOx-300 nanosheet exhibited the most optimal performance. This catalyst enabled complete benzene degradation at a relatively low temperature of 220 °C, even under a high space velocity (SV) of 20,000 h-1, and displayed remarkable durability throughout various catalytic assessments, including SV variations, exposure to water vapor, recycling, and long time-on-stream tests. Characterization analyses confirmed the enhanced interactions between Co and doped La, the presence of abundant adsorbed oxygen, and the extensive exposure of Co3+ species in La0.029CoOx-300 nanosheets. Theoretical calculations further revealed that La doping was beneficial for the formation of oxygen vacancies and the adsorption of more hydroxyl groups. These features strongly promoted the adsorption and activation of oxygen, thereby accelerating the benzene oxidation processes. This work underscores the advantages of doping rare-earth elements into transition-metal oxides as a cost-effective yet efficient strategy for purifying industrial exhausts.

Environmental Sustainability of π-Electron Donor-Based Deep Eutectic Solvents for Toluene Absorption: A Life-Cycle Perspective

The novel π-electron donor-based deep eutectic solvents (DESs) have been shown to be a promising type of absorbent with excellent performance on toluene absorption. However, their greenness or sustainability is still unclear. Thus, to bridge the gap and give a comprehensive evaluation for their industrialization potential, the life cycle assessment (LCA) was used to evaluate the potential environmental impacts incurred from their production and usage for absorbing toluene. The environmental profiles are also compared with that of popular choline chloride (ChCl) based DES, common organic solvent triethylene glycol (TEG) and ionic liquid ([EMIM][Tf2 N]). The results indicate that among the involved hydrogen bond acceptors (HBAs), TEBAC generally imparts lower environmental impacts than other HBAs but has higher impacts than ChCl. Although TEBAC-PhOH is not the most environmentally friendly absorbent during the production stage, its outstanding absorption performance minimizes the environmental impact when absorbing the same mass of toluene. Furthermore, the environmental impacts of the toluene absorption process using TEBAC-PhOH is significantly lower than that of [EMIM][Tf2 N], slightly lower than TEG. Therefore, considering both absorption performance and environmental impacts, TEBAC-PhOH can be used as a promising "green and sustainable" toluene absorbent to traditional absorbents and ionic liquids.

Preparation of CPVC-based activated carbon spheres and insight into the adsorption-desorption performance for typical volatile organic compounds

Chlorinated polyvinyl chloride (CPVC)-based activated carbon spheres with smooth surfaces, good sphericity, interconnected hierarchical porous structure and high porosity have been synthesized by non-solvent induced phase separation method, followed by successive treatments of stabilization, carbonization at 450 °C in N2 atmosphere, and activation with CO2 as an agent at 900-1000 °C. The effect of activation temperatures on the textural properties of activated carbon spheres and their adsorption potential for volatile organic compounds (VOCs) under dynamic conditions is investigated. CO2 activation improves the hierarchy in the microporous range by stimulating the formation of supermicropores and significantly expands the specific surface area and pore volume of activated carbon spheres. The textural properties of adsorbents play a vital role in the adsorption performance of different VOCs. The adsorption capacity of VOC molecules can be greatly promoted by elevating specific surface area and pore volume. Due to the compatibility difference between the VOC molecules and the pore structure of adsorbents, the adsorption capacity follows the order of toluene > m-xylene > n-hexane. The adsorption isotherm of toluene on CPVC-AC1000 can be generally expressed by the Langmuir model. The adsorbents with larger average pore diameters possess a lower activation energy of desorption, which is beneficial for desorption. The carbon sphere activated at 1000 °C is a high-performance adsorbent with good reusability. Thus, the present study provides a synthesis process to produce the activated carbon spheres with high porosity from low-cost CPVC for its application in VOC adsorption.

Extraction of platinum group metals from catalytic converters

Platinum group metals (PGMs) assume an important role within the chemistry and chemical engineering due to their exceptional chemical stability in high temperatures and various environmental conditions. Their unique attributes make them highly demanded materials across an array of industries. Nevertheless, the gradual depletion of PGM reserves underscores necessitates of recycling PGM-containing waste as a means to ensure the reasonable utilization of resources. Recycling of catalytic waste, in particular, presents a more cost-effective and environmentally sustainable approach acquiring these metals, in contrast to the conventional practice of mining from natural ores. Of particular importance are spent automotive catalysts, which represent a valuable source of platinum group metals, featuring substantially higher PGM concentrations than their naturally occurring counterparts. Conventionally, the recovering of PGMs from waste materials predominantly employs hydrometallurgical and pyrometallurgical processes. Unfortunately, these established techniques entail the utilization of potent oxidizing acidic solutions, including aqua regia and hydrochloric acid with chlorine gas, which exert adverse ecological consequences. In recent years, there has been a growing focus on the development of alternative methodologies that are both environmentally friendly and economically viable for the recovery of PGMs from spent catalysts. Notable among these emerging techniques are solvometallurgy, molecular recognition technology, and magnetic separation. This comprehensive review endeavors to study and assess the latest advancements in the recovery of platinum group metals from spent catalysts, meticulously evaluating their respective advantages and disadvantages. Through an analysis, this review aspires to identify the most promising method - one that combines environmental friendliness and economic feasibility.

Boosted Light Alkane Deep Oxidation via Metal Bond Length Modulation-Induced C-C Bond Preferential Activation

Light alkanes (LAs), typical VOCs existing in both stationary and mobile sources, pose significant environmental concerns. Although noble metal catalysts demonstrate strong C-H bond activation, their effectiveness in degrading LAs is hindered by inherent challenges, including poor chemical stability and water resistance. Here, from a new perspective, we propose a feasible strategy that adjusting the metal bond lengths within Pd clusters through partial substitution of smaller radius 3d transition metals (3dTMs) to prioritize the activation of low-energy C-C bonds within LAs. Benefiting from this, PdCo/CeO2 exhibits exceptional catalytic performance in propane degradation due to their high capacity for C-C cleavage stemming from the shorter Pd-Co length (2.51 Å) and lower coordination number (1.73), boosting the activation of α-H and β-H of propane simultaneously and accelerating the mobility of postactivated oxygen species to prevent Pd center deep oxidation. The presence of 3dTMs on Pd clusters improves the redox and charge transfer ability of catalysts, resulting in an amplified generation of oxygen vacancies and facilitating the adsorption and activation of reactants. Mechanistic studies and DFT calculations suggest that the substitution of 3dTMs significantly accelerate C-C bond cleavage within C3 intermediates to generate the subsequent C2 and C1 intermediates, suppressing the generation of harmful byproducts.

Comprehensive Qualitative and Quantitative Colorimetric Sensing of Volatile Organic Compounds Using Monolayered Metal-Organic Framework Films

Cross-responsive chemical sensors are in high demand owing to their ability to distinguish a broad range of analytes. In this study, a vapochromic sensor array based on metal-organic frameworks (MOFs), which exhibits distinct patterns when exposed to volatile organic compounds (VOCs) and humidity, is developed. Conventional sensor arrays consist of various receptors that produce different responses. The vapochromic MOF-based sensor comprises dicopper paddlewheel clusters and dimethylamine azobenzene as binary colorimetric sensing moieties. Upon exposure to VOCs, the constructed sensor encompasses a broad spectrum of colors, ranging from green to red. Furthermore, the color of the MOF is influenced by the solvent used during the pretreatment. Consequently, monolayered MOF thin films can be adapted to multicomponent array systems by immersing the MOF in different solvents. This system provides both qualitative and quantitative sensing, generating unique color patterns corresponding to specific VOC types. Notably, the sensor successfully discriminates each of 14 common VOCs and water and accurately categorizes unknown samples. Moreover, the system undergoes reversible color changes in response to humidity, obviating the need for high-temperature regeneration steps. This novel approach offers insights into the versatile applications of MOFs by creating a colorimetric sensor array capable of detecting various analytes.

Low-temperature oxidative removal of benzene from the air using titanium carbide (MXene)-Supported platinum catalysts

MXenes are an emerging class of two-dimensional (2D) inorganic materials with great potential for versatile applications such as adsorption and catalysis. Here, we describe the synthesis of a platinized titanium carbide MXene (Pt@Ti3C2) catalyst with varying amounts of platinum (0.1%-2 wt.%) for the low-temperature oxidation of benzene, an aromatic volatile organic compound often found in industrial flue gas. A 1% formulation of Pt@Ti3C2-R allowed near-complete (97%) oxidation of benzene to CO2 at 225 °C with a steady-state reaction rate (r) of 0.119 mol g-1·h-1. This low-temperature catalytic oxidation reaction was promoted by an increase in the lattice oxygen (O*)/Pt2+ species (active sites) of 1%Pt@Ti3C2-R from 45.3/34.6% to 71.0/61.1% through pre-thermal reduction under H2 flow, as revealed by X-ray photoelectron spectroscopy, temperature-programmed reduction, and in situ diffuse reflectance infrared Fourier transform spectroscopy analyses. The cataltyic activity of 1% Pt@Ti3C2-R against benzene was assessed under the control of the key process variables (e.g., catalyst mass, flow rate, benzene concentration, relative humidity, and time-on-stream) to help optimize the oxidation reaction process. The results provide new insights into the use of platinum-based 2D MXene catalysts for low-temperature oxidative removal of benzene from the air.

Doping SnO2 with metal ions of varying valence states: discerning the importance of active surface oxygen species vs. acid sites for C3H8 and CO oxidation

To elucidate the valence state effect of doping cations, Li+, Mg2+, Cr3+, Zr4+ and Nb5+ with radii similar to Sn4+ (CN = 6) were chosen to dope tetragonal SnO2. Cr3+, Zr4+ and Nb5+ can enter the SnO2 lattice to produce solid solutions, thus creating more surface defects. However, Li+ and Mg2+ can only stay on the SnO2 surface as nitrates, thus suppressing the surface defects. The rich surface defects facilitate the generation of active O2-/Oδ- and acid sites on the solid solution catalysts, hence improving the reactivity. On the solid solution catalysts active for propane combustion, several reactive intermediates can be formed, but are negligible on those with low activity. It is confirmed that for propane combustion, surface acid sites play a more vital role than active oxygen sites. Nevertheless, for CO oxidation, the active oxygen sites play a more vital role than the acid sites.

Converting formaldehyde in methanol with MoO2 under irradiation: A pollution-free strategy for cleaning air

Direct photocatalytic reduction of toxic formaldehyde (HCHO) in value-added chemicals and fuels is promising because that not only abates the environmental pollution, but also solves the energy shortage. Herein, self-supported MoO2 and MoO3 nanoparticles growing on Mo meshes were comparatively applied to the photocatalytic conversion of HCHO. Under UV-visble lights, MoO2 reduces HCHO in methanol (CH3OH) while MoO3 oxidizes HCHO in carbon oxide and water. Their contrary photocatalytic capacities were revealed. Compared with MoO3, the lower work function of MoO2 enables an electron-rich interface, realizing a complete reduction of 30 ppm HCHO to CH3OH in 30 min. Theoretical calculations clarify that a large number of delocalized electrons on MoO2 attracts HCHO molecule and activates its CO bond, facilitating subsequent hydrogenation and reduction of HCHO to CH3OH. As for MoO3, the wider bandgap and higher potential of valence band govern the photocatalytic oxidation of HCHO.

Formaldehyde Ambient-Temperature Decomposition over Pd/Mn3O4-MnO Driven by Active Sites' Self-Tandem Catalysis

The widespread presence of formaldehyde (HCHO) pollutant has aroused significant environmental and health concerns. The catalytic oxidation of HCHO into CO2 and H2O at ambient temperature is regarded as one of the most efficacious and environmentally friendly approaches; to achieve this, however, accelerating the intermediate formate species formation and decomposition remains an ongoing obstacle. Herein, a unique tandem catalytic system with outstanding performance in low-temperature HCHO oxidation is proposed on well-structured Pd/Mn3O4-MnO catalysts possessing bifunctional catalytic centers. Notably, the optimized tandem catalyst achieves complete oxidation of 100 ppm of HCHO at just 18 °C, much better than the Pd/Mn3O4 (30%) and Pd/MnO (27%) counterparts as well as other physical tandem catalysts. The operando analyses and physical tandem investigations reveal that HCHO is primarily activated to gaseous HCOOH on the surface of Pd/Mn3O4 and subsequently converted to H2CO3 on the Pd/MnO component for deep decomposition. Theoretical studies disclose that Pd/Mn3O4 exhibits a favorable reaction energy barrier for the HCHO → HCOOH step compared to Pd/MnO; while conversely, the HCOOH → H2CO3 step is more facilely accomplished over Pd/MnO. Furthermore, the nanoscale intimacy between two components enhances the mobility of lattice oxygen, thereby facilitating interfacial reconstruction and promoting interaction between active sites of Pd/Mn3O4 and Pd/MnO in local vicinity, which further benefits sustained HCHO tandem catalytic oxidation. The tandem catalysis demonstrated in this work provides a generalizable platform for the future design of well-defined functional catalysts for oxidation reactions.

Monolithic Catalyst of Ni Foam-Supported MnOx for Boosting Magnetocaloric Oxidation of Toluene

Catalytic oxidation has been considered an effective technique for volatile organic compound degradation. Development of metal foam-based monolithic catalysts coupling electromagnetic induction heating (EMIH) with efficiency and low energy is critical yet challenging in industrial applications. Herein, a Mn18.2-NF monolithic catalyst prepared by electrodeposition exhibited superior toluene catalytic activity under EMIH conditions, and the temperature of 90% toluene conversion decreased by 89 °C compared to that in resistance furnace heating. Relevant characterizations proved that the skin effect induced by EMIH encouraged activation of gaseous oxygen, leading to superior low-temperature redox properties of Mn18.2-NF under the EMIH condition. In situ Fourier transform infrared spectroscopy results showed that skin effect-induced activation of oxidizing species further accelerated the conversion of intermediates. As a result, the Mn18.2-NF monolithic catalyst under EMIH demonstrated remarkable performance for the toluene oxidation, surpassing the conventional nonprecious metal catalyst and other reported monolithic catalysts.

Surface-Phosphorylated Ceria for Chlorine-Tolerance Catalysis

An improved fundamental understanding of active site structures can unlock opportunities for catalysis from conceptual design to industrial practice. Herein, we present the computational discovery and experimental demonstration of a highly active surface-phosphorylated ceria catalyst that exhibits robust chlorine tolerance for catalysis. Ab initio molecular dynamics (AIMD) calculations and in situ near-ambient pressure X-ray photoelectron spectroscopy (in situ NAP-XPS) identified a predominantly HPO4 active structure on CeO2(110) and CeO2(111) facets at room temperature. Importantly, further elevating the temperature led to a unique hydrogen (H) atom hopping between coordinatively unsaturated oxygen and the adjacent P═O group of HPO4. Such a mobile H on the catalyst surface can effectively quench the chlorine radicals (Cl•) via an orientated reaction analogous to hydrogen atom transfer (HAT), enabling the surface-phosphorylated CeO2-supported monolithic catalyst to exhibit both expected activity and stability for over 68 days during a pilot test, catalyzing the destruction of a complex chlorinated volatile organic compound industrial off-gas.

Boosting the photocatalytic activity of β-FeOOH catalyst for toluene oxidation by constructing internal electric field at 0D/1D homojunction interfaces

Photocatalytic degradation is considered as the most energy-efficient, environmentally benign, and effective method for treating low fraction organic contaminants. However, the photocatalysts still suffer from low utilization efficiency of visible-light and severe carrier recombination. Heterojunctions can resolve these two main problems in some extent but still be restrained by the low quality of hetero-interface. In this study, homojunction was constructed of β-FeOOH quantum dots and nanorods with the same lattice by a two-step precipitation method, to avoid the heterointerface with too many defects and possess good charge separation as a consequence. The catalysts were characterized by activity test, electron spin resonance, Mott-Schottky plots, photocurrent density tests and open-circuit potential measurements, etc. The results revealed that a strong internal electric fields (IEFs) was created at the interface of catalyst. Beneficently, the electron rearrangement leads to a more rational distribution of oxygen vacancies in the catalyst, resulting in more efficient dissociation of oxygen molecules and formation of active radicals, thus facilitating the efficient degradation of toluene. This study proposes a novel strategy to boosting the photocatalytic activity of low dimensional semiconductors via forming homojunction interfaces to improve their charge transfer.

Efficient propane mineralization over unsaturated Pd cluster/CeO2 with prominent C-C cleavage capacity driven by inherent oxygen activation ability

Light alkanes extensively presented in industrial exhausts have led tremendous harm to the atmospheric environment and human health. However, the catalytic destruction of light alkanes generally operates at elevated temperatures and the consequent reaction by-products are inevitably produced. It is therefore of great significance to engineer catalysts with superior thermal stability, internal activity and selectivity. Herein, we developed a Pd cluster/CeO2 catalyst (Pdn/CeO2) by a scalable deposition precipitation strategy, which demonstrates unexpected activity and thermal stability in the presence of 5% H2O attributing to abundant unsaturated Pd metal sites and excellent oxygen dissociation performance. Pdn/CeO2 possesses a highly efficient C-C cleavage capability due to the persistent formation of a large number of oxygen vacancies. In comparison, the Pd1/CeO2 catalyst, which is preferential for C-H bond cleavage and inactive for C-C bond cracking, produces remarkable hazardous organic by-products such as propyne and propylene, inhibiting the continuous decomposition of propane. The present study sheds critical insights into engineering efficient and stable catalysts for light alkane destruction.

Associations of individual and mixture exposure to volatile organic compounds with metabolic syndrome and its components among US adults

BACKGROUND

People are exposed to various volatile organic compounds (VOCs) in their environment. Our study aims to examine the links between VOCs exposure and metabolic syndrome (MetS) and its components, as well as identify critical VOCs.

METHOD

In this study, we enrolled 8223 adults from the National Health and Nutrition Examination Survey (NHANES) and analyzed 15 kinds of urinary VOCs metabolites. The Spearman correlation model, generalized linear regression model, restricted cubic spline (RCS), weighted quantile sum (WQS) analysis, and Bayesian kernel machine regression (BKMR) were used to evaluate the association between individual VOC/VOCs mixture and MetS as well as its components.

RESULTS

In generalized linear regression model, compared to the lowest quartile of urinary VOCs metabolites, the highest quartiles of urinary VOC metabolites were positively associated with MetS including N-Acetyl-S-(N-methylcarbamoyl)-l-cysteine (AMCC) (OR: 1.22, 95%CI: 1.00, 1.49), N-Acetyl-S-(2-carboxyethyl)-l-cysteine (CEMA) (OR: 1.71, 95%CI: 1.41, 2.07), N-Acetyl-S-(3-hydroxypropyl)-l-cysteine (3HPMA) (OR: 1.32, 95%CI: 1.11, 1.63), and N-Acetyl-S-(3-hydroxypropyl-1-methyl)-l-cysteine (HMPMA) (OR: 1.34, 95%CI: 1.09, 1.64). Consistent results were found in the dose-response relationship in RCS model. Results of WQS showed that VOCs mixture was positively associated with MetS (OR: 1.16, 95%CI: 1.06, 1.28), elevated WC (OR: 1.25, 95%CI: 1.13, 1.37), elevated FBG (OR: 1.24, 95%CI: 1.12, 1.37), elevated TG (OR: 1.34, 95%CI: 1.21, 1.49), and reduced HDL-C (OR: 1.20, 95%CI: 1.09, 1.33). However, the WQS index was negatively associated with elevated BP (OR: 0.81; 95%CI: 0.70, 0.94). BKMR analysis confirmed that the urinary VOCs mixture was positively associated with MetS, elevated WC, elevated TG, reduced HDL-C, elevated FBG, but negatively associated with elevated BP. CEMA was defined as the most heavily weighted chemical in the WQS and BKMR models.

CONCLUSION

Our findings suggested that exposure to specific VOC or VOCs mixture is associated with the higher risk of MetS and its components, except for elevated BP.

Recent advances in simultaneous removal of NOx and VOCs over bifunctional catalysts via SCR and oxidation reaction

NOx and volatile organic compounds (VOCs) are two major pollutants commonly found in industrial flue gas emissions. They play a significant role as precursors in the formation of ozone and fine particulate matter (PM2.5). The simultaneous removal of NOx and VOCs is crucial in addressing ozone and PM2.5 pollution. In terms of investment costs and space requirements, the development of bifunctional catalysts for the simultaneous selective catalytic reduction (SCR) of NOx and catalytic oxidation of VOCs emerges as a viable technology that has garnered considerable attention. This review provides a summary of recent advances in catalysts for the simultaneous removal of NOx and VOCs. It discusses the reaction mechanisms and interactions involved in NH3-SCR and VOCs catalytic oxidation, the effects of catalyst acidity and redox properties. The insufficiency of bifunctional catalysts was pointed out, including issues related to catalytic activity, product selectivity, catalyst deactivation, and environmental concerns. Subsequently, potential solutions are presented to enhance catalyst performance, such as optimizing the redox properties and acidity, enhancing resistance to poisoning, substituting environment friendly metals and introducing hydrocarbon selective catalytic reduction (HC-SCR) reaction. Finally, some suggestions are given for future research directions in catalyst development are prospected.

Insights into effects of grain boundary engineering in composite metal oxide catalysts for improving catalytic performance

Volatile Organic Compounds (VOCs) have long been a threat to human health. However, designing economical and efficient transition metal composite oxide catalysts for VOCs purification remains a challenge. Herein, this study demonstrates the enormous potential of grain boundary engineering in facilitating VOCs decomposition over ordered mesoporous composite oxide denoted as 3D-MnxCoy (x, y = 1, 3, 5, 7, 9). Specifically, the three-dimensional (3D) Mn7Co1 catalyst shows 100% ethyl acetate removal efficiency for a continuous airflow containing 1000 ppm ethyl acetate over 60000 h-1 space velocity at 160 °C. Mechanism study suggests that the high catalytic performance originates from the lattice distortion caused by the introduction of heteroatoms, along with the size effect of nanopore walls, which leads to the formation of various grain boundaries on the catalyst surface. The presence of grain boundaries facilitates the generation of oxygen vacancies, thus promoting the migration and activation of oxygen species. Furthermore, the near-atmospheric pressure X-ray photoelectron spectroscopy (NAP- XPS) monitoring results reveal that the bimetallic synergy enhanced by grain boundary accelerates the catalytic reaction rate of VOCs through Mn3++Co3+↔Mn4++Co2+ redox cycle. This study may shed light on the great potential of ordered mesoporous bimetallic oxide catalysts in VOCs pollution control.

C-Cl Bond Activation at Rotated vs Unrotated Dinuclear Site Related to [FeFe]-Hydrogenases

The novel dinuclear complex related to the [FeFe]-hydrogenases active site, [Fe2(μ-pdt)(κ2-dmpe)2(CO)2] (1), is highly reactive toward chlorinated compounds CHxCl4-x (x = 1, 2) affording selectively terminal or bridging chloro diiron isomers through a C-Cl bond activation. DFT calculations suggest a cooperative mechanism involving a formal concerted regioselective chloronium transfer depending on the unrotated or rotated conformation of two isomers of 1.

Selective Synergistic Catalytic Elimination of NOx and CH3SH via Engineering Deep Oxidation Sites against Toxic Byproducts Formation

NOx and CH3SH as two typical air pollutants widely coexist in various energy and industrial processes; hence, it is urgent to develop highly efficient catalysts to synergistically eliminate NOx and CH3SH. However, the catalytic system for synergistically eliminating NOx and CH3SH is seldom investigated to date. Meanwhile, the deactivation effects of CH3SH on catalysts and the formation mechanism of toxic byproducts emitted from the synergistic catalytic elimination reaction are still vague. Herein, selective synergistic catalytic elimination (SSCE) of NOx and CH3SH via engineering deep oxidation sites over Cu-modified Nb-Fe composite oxides supported on TiO2 catalyst against toxic CO and HCN byproducts formation has been originally demonstrated. Various spectroscopic and microscopic characterizations demonstrate that the sufficient chemisorbed oxygen species induced by the persistent electron transfer from Nb-Fe composite oxides to copper oxides can deeply oxidize HCOOH to CO2 for avoiding highly toxic byproducts formation. This work is of significance in designing superior catalysts employed in more complex working conditions and sheds light on the progress in the SSCE of NOx and sulfur-containing volatile organic compounds.

Catalytic removal of harmful volatile organic compounds by reutilizing zinc rods waste from spent batteries as a palladium catalyst support

The emission of volatile organic compounds (VOCs) has led to significant deterioration in air quality, making it imperative to ensure that these compounds are removed from emission sources before they are released into the atmosphere. In this context, the present study recycled spent primary batteries to use their zinc rods waste (ZRW) as a palladium catalyst support for the removal of harmful VOCs. To this end, palladium supported on ZRW (Pd/ZRW) catalysts were prepared and tested for the catalytic oxidation of benzene, methylbenzene and 1,2-dimethylbenzene. The physicochemical properties of the Pd/ZRW catalysts were carefully characterized by ICP-OES, BET, SEM, XRD, FE-TEM, XPS, and H2-TPR analyses. The main component of ZRW was identified as ZnO. Consistent with expectations, increases in the loading of Pd from 0.1 to 1.0 wt% in the Pd/ZRW catalysts resulted in enhanced VOCs removal efficiency. The reaction temperature required for the complete oxidation (100% removal efficiency) of methylbenzene and 1,2-dimethylbenzene on the 1.0 wt% Pd/ZRW catalyst was below 340 °C at a gas hourly space velocity of 50,000 h-1. TEM, XPS, and H2-TPR results implied that the enhancement of catalytic activity with the addition of Pd could be attributed to the readily movable surface lattice oxygen as well as the active component (Pd species). Ultimately, ZRW of spent primary batteries appear to show promise as a catalyst support for VOCs removal. This study has introduced a novel strategy for reducing air pollutants by utilizing waste, which promotes the disposal of hazardous solid waste and ensures clean air quality.

Low-Temperature Propane Activation and Mineralization over a Co3O4 Sub-nanometer Porous Sheet: Atomic-Level Insights

Light alkanes make up a class of widespread volatile organic compounds (VOCs), bringing great environmental hazards and health concerns. However, the low-temperature catalytic destruction of light alkanes is still a great challenge to settle due to their high reaction inertness and weak polarity. Herein, a Co3O4 sub-nanometer porous sheet (Co3O4-SPS) was fabricated and comprehensively compared with its bulk counterparts in the catalytic oxidation of C3H8. Results demonstrated that abundant low-coordinated Co atoms on the Co3O4-SPS surface boost the activation of adsorbed oxygen and enhance the catalytic activity. Moreover, Co3O4-SPS has better surface metal properties, which is beneficial to electron transfer between the catalyst surface and the reactant molecules, promoting the interaction between C3H8 molecules and dissociated O atoms and facilitating the activation of C-H bonds. Due to these, Co3O4-SPS harvests a prominent performance for C3H8 destruction, 100% of which decomposed at 165 °C (apparent activation energy of 49.4 kJ mol-1), much better than the bulk Co3O4 (450 °C and 126.9 kJ mol-1) and typical noble metal catalysts. Moreover, Co3O4-SPS also has excellent thermal stability and water resistance. This study deepens the atomic-level insights into the catalytic capacity of Co3O4-SPS in light alkane purification and provides references for designing efficacious catalysts for thermocatalytic oxidation reactions.

Unravelling the impacts of sulfur dioxide on dioxin catalytic decomposition on V2O5/AC catalysts

Dioxins are high chlorine, toxic, and persistent organic pollutants that exert significant pressure on both human and the environment. From the analysis of current pollutant removal of the whole life cycle, such as integrated removal of NOx, SO2 and dioxins in a system, the dioxins oxidation activity as well as the distribution of oxidation products in the presence of SO2 are still a challenge. In this study, dibenzofuran (DBF) was regarded as a model dioxin compound, and V2O5/AC was used as a catalyst to investigate the impact of SO2 on degradation activity and the degradation path of DBF. Various characterization results showed that SO2 could promote the transformation of DBF to intermediates through a reaction with lattice oxygen and lower the apparent activated energy of DBF catalytic oxidation on V2O5/AC catalysts. The density functional theory (DFT) calculations confirmed that SO2 improved the oxidation ability of lattice oxygen on V2O5/AC. The ethyl hydrogen fumarate intermediate decreased and the small-molecule byproducts increased, providing further evidence that SO2 accelerates the degradation of DBF and its intermediates. However, the formation of VOSO4 would inevitably deteriorate the adsorption and oxidation abilities of V2O5/AC. A model is pioneered to describe the relationship between SO2 promotion and VOSO4 inhibition on DBF catalytic oxidation on a V2O5/AC catalyst. This study is expected to provide theoretical guidance for the collaborative abatement of multi-pollutants in flue gas.

Insights into the underpinning effect of graphene in Cu1Mn10 on enhancing the low-temperature catalytic activity for CO oxidation

CO emission is a critical issue of industrial processes such as steel-smelting, cement manufacturing, and waste incineration. Catalytic oxidation based on Cu-Mn binary catalysts shows great potential for efficient removal of CO, whereas their practical applicability is limited by the inferior low-temperature catalytic activity and the high catalyst cost owing to a substantial quantity of Cu. In this study, doping graphene is designed to adjust the electron transfer capability to improve the low-temperature catalytic activity as well as reduce the amount of Cu, and thereby Cu1Mn10 catalysts doped with slight amounts of graphene (x%G-Cu1Mn10, x is 1∼5) were fabricated. It was found that the introduction of graphene could form effective electron transport channels to enhance the intermetallic interaction and oxygen vacancy generation, thus improving the low-temperature catalytic performance of the Cu1Mn10 catalyst. Among all the catalysts, 4%G-Cu1Mn10 exhibited the highest activity, achieving CO conversion of 92% at 110 °C at a weight hourly space velocity of 120,000 mL/(g∙h). The introduction of graphene also enabled the catalyst with excellent catalytic activity and stability at a relative humidity of 70%. Attractively, 4%G-Cu1Mn10 can be further loaded into the polyester fabric, presenting great application potentials in the effective elimination of CO during the dust removal process since the flue gas temperature in the dust collector is just around the T90% and the catalyst that is inside of fabric fiber rather than on the fabric surface can be rarely influenced by the dust. In general, doping graphene provides a facile method to enhance the low-temperature activities of the Cu-Mn binary catalysts and cut down the use of valuable Cu, showing great application potential.

Electron Donation from Boron Suboxides via Strong p-d Orbital Hybridization Boosts Molecular O2 Activation on Ru/TiO2 for Low-Temperature Dibromomethane Oxidation

Low-temperature catalytic oxidation is of significance to the degradation of halogenated volatile organic compounds (HVOCs) to avoid hazardous byproducts with low energy consumption. Efficient molecular oxygen (O2) activation is pivotal to it but usually limited by the insufficient electron cloud density at the metal center. Herein, Ru-B catalysts with enhanced electron density around Ru were designed to achieve efficient O2 activation, realizing dibromomethane (DBM) degradation T90 at 182 °C on RuB1/TiO2 (about 30 °C lower than pristine Ru/TiO2) with a TOFRu value of 0.055 s-1 (over 8 times that of Ru/TiO2). Compared to the limited electron transfer (0.02 e) on pristine Ru/TiO2, the Ru center gained sufficient negative charges (0.31 e) from BOx via strong p-d orbital hybridization. The Ru-B site then acted as the electron donor complexing with the 2π* antibonding orbital of O2 to realize the O2 dissociative activation. The reactive oxygen species formed thereby could initiate a fast conversion and oxidation of formate intermediates, thus eventually boosting the low-temperature catalytic activity. Furthermore, we found that the Ru-B sites for O2 activation have adaptation for pollutant removal and multiple metal availability. Our study shed light on robust O2 activation catalyst design based on electron density adjustment by boron.

Constructing Active Cu2+-O-Fe3+ Sites at the CuO-Fe3O4 Interface to Promote Activation of Surface Lattice Oxygen

Activating surface lattice oxygen (Olatt) through the modulation of metal-oxygen bond strength has proven to be an effective route for facilitating the catalytic degradation of volatile organic compounds (VOCs). Although this strategy has been implemented via the construction of the TM1-O-TM2 (TM represents a transition metal) structure in various reactions, the underlying principle requires exploration when using different TMs. Herein, the Cu2+-O-Fe3+ structure was created by developing CuO-Fe3O4 composites with enhanced interfacial effect, which exhibited superior catalytic activity to their counterparts, with T90 (the temperature of toluene conversion reaching 90%) decreasing by approximately 50 °C. Structural analyses and theoretical calculations demonstrated that the active Cu2+-O-Fe3+ sites at the CuO-Fe3O4 interface improved low-temperature reducibility and oxygen species activity. Particularly, X-ray absorption fine structure spectroscopy revealed the contraction and expansion of Cu-O and Fe-O bonds, respectively, which were responsible for the activation of the surface Olatt. A mechanistic study revealed that toluene can be oxidized by rapid dehydrogenation of methyl assisted by the highly active surface Olatt and subsequently undergo ring-opening and deep mineralization into CO2 following the Mars-van Krevelen mechanism. This study provided a novel strategy to explore interface-enhanced TM catalysts for efficient surface Olatt activation and VOCs abatement.

Enhancing Benzene Combustion Activity through Preferential Platinum Atom Exposure via Strategic Pt-Cu Alloying

Volatile organic compounds such as benzene are hazardous air pollutants that require effective elimination. Noble metal-based catalysts exhibit high benzene combustion activity, but their prohibitive cost necessitates strategies to enhance utilization efficiency. This study investigates a Pt-Cu alloy catalyst for improved benzene combustion by preferentially exposing Pt active sites through Cu alloying. Aberration-corrected scanning transmission electron microscopy and X-ray spectroscopy characterize the nanoscale distribution and enrichment of Pt on the alloy surface. Kinetic measurements demonstrate substantially enhanced activity compared with Pt catalysts, attributed to increased Pt metallic site exposure rather than alteration of the reaction mechanism. In situ Fourier transform infrared (FTIR) spectroscopy reveals a higher abundance of terrace-like Pt sites in the alloy, beneficial for benzene adsorption. Partial pressure dependence analyses indicate competitive adsorption of benzene and O2, following Langmuir-Hinshelwood kinetics. These findings provide conceptual insights into tuning surface composition in bimetallic catalysts to optimize noble metal efficiency, with broad applicability for sustainable catalytic process advancement.

Deep mineralization of VOCs in an embedded hybrid structure CoFe2O4/MoS2/PMS wet scrubber system

Peroxymonosulfate (PMS)-based advanced oxidation processes in liquid phase systems can actively degrade toluene. In this work, the catechol structural surfactant was introduced to synthesize the dispersed and homogeneous CoFe2O4 nanospheres and embedded into MoS2 nanoflowers to form magnetically separable heterojunction catalysts. The innovative approach effectively mitigated the traditionally low reduction efficiency of transition metal ions during the heterogeneous activation process. In CoFe2O4/MoS2/PMS system, the toluene removal efficiency remained 95% within 2 h. The contribution of SO4⋅-, ·O2-, ·OH, and 1O2 was revealed by radical quenching experiment and electron paramagnetic resonance spectroscopy. The results illustrated that MoS2 offers ample reduction sites for facilitating PMS activation via Fe3+/Fe2+ redox interactions. Furthermore, an investigation into the toluene degradation pathway within the CoFe2O4/MoS2/PMS system revealed its capability to suppress the formation of toxic byproducts. This ambient-temperature liquid-phase method presented promising route for the removal of industrial volatile organic pollutants.

Catalytic degradation of benzene at room temperature over FeN4O2 sites embedded in porous carbon

Benzene and its aromatic derivatives are typical volatile organic compounds for indoor and outdoor air pollution, harmful to human health and the environment. It has been considered extremely difficult to break down benzene rings at ambient conditions without external energy input, due to the extraordinary stability of the aromatic structure. Here, we show one such solution that can thoroughly degrade benzene to basically water and carbon dioxide at 25 °C in air using atomically dispersed Fe in N-doped porous carbon, with almost 100% benzene conversion. Further experimental studies combined with molecular simulations reveal the mechanism of this catalytic reaction. Hydroxyl radicals (·OH) evolved on the atomically dispersed FeN4O2 catalytic centers were found responsible for initiating and completing the oxidation of benzene. This work provides a new chemistry to degrade aromatics at ambient conditions and also a pathway to generate active ·OH oxidant for generic remediation of organic pollutants.

Surface oxygen vacancy-dependent molecular oxygen activation for propane combustion over α-MnO2

Oxygen vacancies (OV), as the sites of molecular oxygen adsorption and activation, play an important role in the catalytic combustion process of volatile organic compounds (VOCs). Revealing the relationship between OV concentration and molecular oxygen activation behavior is of significance to construct the efficient catalysts. Herein, α-MnO2 with different OV concentrations was prepared to investigate the molecular oxygen activation for C3H8 combustion. It is disclosed that the enhanced OV concentration in α-MnO2 induced the reconfiguration of surface metal atoms, resulting in the transformation of oxygen activation configuration from end-on mode to side-on mode. Oxygen molecules in side-on mode possessed more localized electron density and weaker coordination bond strength with surrounding Mn atoms, which were more favorable to adsorb C3H8 molecules and activate C-H bond for the improved combustion performance. This work provides a new understanding to reveal that the increased OV concentration contributes to more efficient VOCs combustion.

Preparation of Cellulose-Based Activated Carbon Fibers with Improved Yield and Their Methylene Chloride Adsorption Evaluation

The recent rapid growth of the battery industry has led to a rapid increase in methylene chloride emissions. Methylene chloride causes health and social problems in humans. In this study, cellulose-based activated carbon fibers (CACFs) with improved yield were prepared for the removal of methylene chloride. The concentration of ammonium phosphate in the pretreatment controlled the crosslink density of cellulose fibers and improved the yield. From the results, the specific surface area and total pore volume of cellulose-based activated carbon fibers pretreated with ammonium phosphate (AP-CACFs) were determined to be 1920-2060 m2/g and 0.83-1.02 cm3/g, respectively, and the total yield improved by 6.78-11.59% compared to that of CACFs (4.97%). In particular, a correlation between the textural properties of CACFs and methylene chloride adsorption/desorption behavior was obtained. This correlation can be used to develop efficient adsorbents for methylene chloride removal.

Recent Progress in Gas Sensors Based on P3HT Polymer Field-Effect Transistors

In recent decades, the rapid development of the global economy has led to a substantial increase in energy consumption, subsequently resulting in the emission of a significant quantity of toxic gases into the environment. So far, gas sensors based on polymer field-effect transistors (PFETs), a highly practical and cost-efficient strategy, have garnered considerable attention, primarily attributed to their inherent advantages of offering a plethora of material choices, robust flexibility, and cost-effectiveness. Notably, the development of functional organic semiconductors (OSCs), such as poly(3-hexylthiophene-2,5-diyl) (P3HT), has been the subject of extensive scholarly investigation in recent years due to its widespread availability and remarkable sensing characteristics. This paper provides an exhaustive overview encompassing the production, functionalization strategies, and practical applications of gas sensors incorporating P3HT as the OSC layer. The exceptional sensing attributes and wide-ranging utility of P3HT position it as a promising candidate for improving PFET-based gas sensors.

What is the role of interface in the catalytic elimination of multi-carbon air pollutants?

Multi-carbon air pollutants pose serious hazards to the environment and health, especially soot and volatile organic compounds (VOCs). Catalytic oxidation is one of the most effective technologies for eliminating them. The oxidation of soot and most hydrocarbon VOCs begins with C-H (or edge-CH) activation, so this commonality can be targeted to design active sites. Rationally designed interface nanostructures optimize metal-support interactions (MSIs), providing suitable active sites for C-H activation. Meanwhile, the interfacial reactant spillover facilitates the further decomposition of activated intermediates. Thus, rationally exploiting interfacial effects is critical to enhancing catalytic activity. In this review, we analyzed recent advances in the following aspects: I. Understanding of the interface effects and design; II. Optimization of the catalyst-reactant contact, metal-support interface, and MSIs; III. Design of the interfacial composition and perimeter. Based on the analysis of the advances and current status, we provided challenges and opportunities for the rational design of interface nanostructures and interface-related stability. Meanwhile, a critical outlook was given on the interfacial sites of single-atom catalysts (SACs) for specific activation and catalytic selectivity.

Size Effect of Platinum Nanoparticles over Platinum-Manganese Oxide on the Low-Temperature Oxidation of Toluene

The effect of size of Pt nanoparticles has an important influence on the performance of supported Pt-based catalysts for the elimination of toluene. Herein, uniform Pt nanoparticles with average sizes of 1.5, 2.0, 2.5, 2.9, and 3.6 nm were obtained and supported on manganese oxide octahedral molecular sieves (OMS-2), and their catalytic performances for toluene oxidation were evaluated. Benefiting from the moderate interfacial interaction between nanoparticles and manganese oxide support, Pt/OMS-2-3 with the Pt particle size of 3.0 nm showed the best catalytic performance owing to the highest content of Pt2+ species. It also facilitates the formation of more abundant Mnδ+ (Mn2+ and Mn3+) and oxygen vacancies than that of the other sizes of the OMS-2-supported Pt nanoparticles, which can be filled by a large amount of adsorbed oxygen and converted into reactive oxygen species. We further showed that the resulting surface synergetic oxygen vacancies (Pt2+-Ov-Mnδ+) play a decisive part in catalyzing the complete oxidation of toluene. The result will provide new insights for designing efficient Pt-based catalysts for deep purification of toluene.

Controlled Encapsulation of Gold Nanoparticles into Zr-Metal-Organic Frameworks with Improved Detection Limitation of Volatile Organic Compounds via Surface-Enhanced Raman Scattering

Volatile organic compounds (VOCs) have harmful effects on human health and the environment but detecting low levels of VOCs is challenging due to a lack of reliable biomarkers. However, incorporating gold nanoparticles (Au NPs) into metal-organic frameworks (MOFs) shows promise for VOC detection. In this study, we developed nanoscale Au@UiO-66 that exhibited surface-enhanced Raman scattering (SERS) activity even at very low levels of toluene vapors (down to 1.0 ppm) due to the thickness of the shell and strong π-π interactions between benzenyl-type linkers and toluene. The UiO-66 shell also increased the thermal stability of the Au NPs, preventing aggregation up to 550 °C. This development may be useful for sensitive detection of VOCs for environmental protection purposes.